1 /* $NetBSD: umodem.c,v 1.45 2002/09/23 05:51:23 simonb Exp $ */
7 * Copyright (c) 2003, M. Warner Losh <imp@FreeBSD.org>.
10 * Redistribution and use in source and binary forms, with or without
11 * modification, are permitted provided that the following conditions
13 * 1. Redistributions of source code must retain the above copyright
14 * notice, this list of conditions and the following disclaimer.
15 * 2. Redistributions in binary form must reproduce the above copyright
16 * notice, this list of conditions and the following disclaimer in the
17 * documentation and/or other materials provided with the distribution.
19 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
23 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33 * Copyright (c) 1998 The NetBSD Foundation, Inc.
34 * All rights reserved.
36 * This code is derived from software contributed to The NetBSD Foundation
37 * by Lennart Augustsson (lennart@augustsson.net) at
38 * Carlstedt Research & Technology.
40 * Redistribution and use in source and binary forms, with or without
41 * modification, are permitted provided that the following conditions
43 * 1. Redistributions of source code must retain the above copyright
44 * notice, this list of conditions and the following disclaimer.
45 * 2. Redistributions in binary form must reproduce the above copyright
46 * notice, this list of conditions and the following disclaimer in the
47 * documentation and/or other materials provided with the distribution.
48 * 3. All advertising materials mentioning features or use of this software
49 * must display the following acknowledgement:
50 * This product includes software developed by the NetBSD
51 * Foundation, Inc. and its contributors.
52 * 4. Neither the name of The NetBSD Foundation nor the names of its
53 * contributors may be used to endorse or promote products derived
54 * from this software without specific prior written permission.
56 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
57 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
58 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
59 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
60 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
61 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
62 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
63 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
64 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
65 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
66 * POSSIBILITY OF SUCH DAMAGE.
70 * Comm Class spec: http://www.usb.org/developers/devclass_docs/usbccs10.pdf
71 * http://www.usb.org/developers/devclass_docs/usbcdc11.pdf
72 * http://www.usb.org/developers/devclass_docs/cdc_wmc10.zip
77 * - Add error recovery in various places; the big problem is what
78 * to do in a callback if there is an error.
79 * - Implement a Call Device for modems without multiplexed commands.
83 #include <sys/stdint.h>
84 #include <sys/stddef.h>
85 #include <sys/param.h>
86 #include <sys/queue.h>
87 #include <sys/types.h>
88 #include <sys/systm.h>
89 #include <sys/kernel.h>
91 #include <sys/module.h>
93 #include <sys/mutex.h>
94 #include <sys/condvar.h>
95 #include <sys/sysctl.h>
97 #include <sys/unistd.h>
98 #include <sys/callout.h>
99 #include <sys/malloc.h>
100 #include <sys/priv.h>
102 #include <dev/usb/usb.h>
103 #include <dev/usb/usbdi.h>
104 #include <dev/usb/usbdi_util.h>
105 #include <dev/usb/usbhid.h>
106 #include <dev/usb/usb_cdc.h>
109 #include <dev/usb/usb_ioctl.h>
111 #define USB_DEBUG_VAR umodem_debug
112 #include <dev/usb/usb_debug.h>
113 #include <dev/usb/usb_process.h>
114 #include <dev/usb/quirk/usb_quirk.h>
116 #include <dev/usb/serial/usb_serial.h>
119 static int umodem_debug = 0;
121 SYSCTL_NODE(_hw_usb, OID_AUTO, umodem, CTLFLAG_RW, 0, "USB umodem");
122 SYSCTL_INT(_hw_usb_umodem, OID_AUTO, debug, CTLFLAG_RW,
123 &umodem_debug, 0, "Debug level");
126 static const STRUCT_USB_HOST_ID umodem_devs[] = {
127 /* Generic Modem class match */
128 {USB_IFACE_CLASS(UICLASS_CDC),
129 USB_IFACE_SUBCLASS(UISUBCLASS_ABSTRACT_CONTROL_MODEL),
130 USB_IFACE_PROTOCOL(UIPROTO_CDC_AT)},
131 /* Kyocera AH-K3001V */
132 {USB_VPI(USB_VENDOR_KYOCERA, USB_PRODUCT_KYOCERA_AHK3001V, 1)},
133 {USB_VPI(USB_VENDOR_SIERRA, USB_PRODUCT_SIERRA_MC5720, 1)},
134 {USB_VPI(USB_VENDOR_CURITEL, USB_PRODUCT_CURITEL_PC5740, 1)},
138 * As speeds for umodem deivces increase, these numbers will need to
139 * be increased. They should be good for G3 speeds and below.
141 * TODO: The TTY buffers should be increased!
143 #define UMODEM_BUF_SIZE 1024
152 #define UMODEM_MODVER 1 /* module version */
154 struct umodem_softc {
155 struct ucom_super_softc sc_super_ucom;
156 struct ucom_softc sc_ucom;
158 struct usb_xfer *sc_xfer[UMODEM_N_TRANSFER];
159 struct usb_device *sc_udev;
164 uint8_t sc_lsr; /* local status register */
165 uint8_t sc_msr; /* modem status register */
166 uint8_t sc_ctrl_iface_no;
167 uint8_t sc_data_iface_no;
168 uint8_t sc_iface_index[2];
169 uint8_t sc_cm_over_data;
170 uint8_t sc_cm_cap; /* CM capabilities */
171 uint8_t sc_acm_cap; /* ACM capabilities */
174 static device_probe_t umodem_probe;
175 static device_attach_t umodem_attach;
176 static device_detach_t umodem_detach;
178 static usb_callback_t umodem_intr_callback;
179 static usb_callback_t umodem_write_callback;
180 static usb_callback_t umodem_read_callback;
182 static void umodem_start_read(struct ucom_softc *);
183 static void umodem_stop_read(struct ucom_softc *);
184 static void umodem_start_write(struct ucom_softc *);
185 static void umodem_stop_write(struct ucom_softc *);
186 static void umodem_get_caps(struct usb_attach_arg *, uint8_t *, uint8_t *);
187 static void umodem_cfg_get_status(struct ucom_softc *, uint8_t *,
189 static int umodem_pre_param(struct ucom_softc *, struct termios *);
190 static void umodem_cfg_param(struct ucom_softc *, struct termios *);
191 static int umodem_ioctl(struct ucom_softc *, uint32_t, caddr_t, int,
193 static void umodem_cfg_set_dtr(struct ucom_softc *, uint8_t);
194 static void umodem_cfg_set_rts(struct ucom_softc *, uint8_t);
195 static void umodem_cfg_set_break(struct ucom_softc *, uint8_t);
196 static void *umodem_get_desc(struct usb_attach_arg *, uint8_t, uint8_t);
197 static usb_error_t umodem_set_comm_feature(struct usb_device *, uint8_t,
199 static void umodem_poll(struct ucom_softc *ucom);
200 static void umodem_find_data_iface(struct usb_attach_arg *uaa,
201 uint8_t, uint8_t *, uint8_t *);
203 static const struct usb_config umodem_config[UMODEM_N_TRANSFER] = {
207 .endpoint = UE_ADDR_ANY,
208 .direction = UE_DIR_OUT,
210 .bufsize = UMODEM_BUF_SIZE,
211 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
212 .callback = &umodem_write_callback,
217 .endpoint = UE_ADDR_ANY,
218 .direction = UE_DIR_IN,
220 .bufsize = UMODEM_BUF_SIZE,
221 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
222 .callback = &umodem_read_callback,
226 .type = UE_INTERRUPT,
227 .endpoint = UE_ADDR_ANY,
228 .direction = UE_DIR_IN,
230 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,.no_pipe_ok = 1,},
231 .bufsize = 0, /* use wMaxPacketSize */
232 .callback = &umodem_intr_callback,
236 static const struct ucom_callback umodem_callback = {
237 .ucom_cfg_get_status = &umodem_cfg_get_status,
238 .ucom_cfg_set_dtr = &umodem_cfg_set_dtr,
239 .ucom_cfg_set_rts = &umodem_cfg_set_rts,
240 .ucom_cfg_set_break = &umodem_cfg_set_break,
241 .ucom_cfg_param = &umodem_cfg_param,
242 .ucom_pre_param = &umodem_pre_param,
243 .ucom_ioctl = &umodem_ioctl,
244 .ucom_start_read = &umodem_start_read,
245 .ucom_stop_read = &umodem_stop_read,
246 .ucom_start_write = &umodem_start_write,
247 .ucom_stop_write = &umodem_stop_write,
248 .ucom_poll = &umodem_poll,
251 static device_method_t umodem_methods[] = {
252 DEVMETHOD(device_probe, umodem_probe),
253 DEVMETHOD(device_attach, umodem_attach),
254 DEVMETHOD(device_detach, umodem_detach),
258 static devclass_t umodem_devclass;
260 static driver_t umodem_driver = {
262 .methods = umodem_methods,
263 .size = sizeof(struct umodem_softc),
266 DRIVER_MODULE(umodem, uhub, umodem_driver, umodem_devclass, NULL, 0);
267 MODULE_DEPEND(umodem, ucom, 1, 1, 1);
268 MODULE_DEPEND(umodem, usb, 1, 1, 1);
269 MODULE_VERSION(umodem, UMODEM_MODVER);
272 umodem_probe(device_t dev)
274 struct usb_attach_arg *uaa = device_get_ivars(dev);
279 if (uaa->usb_mode != USB_MODE_HOST)
282 error = usbd_lookup_id_by_uaa(umodem_devs, sizeof(umodem_devs), uaa);
286 return (BUS_PROBE_GENERIC);
290 umodem_attach(device_t dev)
292 struct usb_attach_arg *uaa = device_get_ivars(dev);
293 struct umodem_softc *sc = device_get_softc(dev);
294 struct usb_cdc_cm_descriptor *cmd;
295 struct usb_cdc_union_descriptor *cud;
299 device_set_usb_desc(dev);
300 mtx_init(&sc->sc_mtx, "umodem", NULL, MTX_DEF);
302 sc->sc_ctrl_iface_no = uaa->info.bIfaceNum;
303 sc->sc_iface_index[1] = uaa->info.bIfaceIndex;
304 sc->sc_udev = uaa->device;
306 umodem_get_caps(uaa, &sc->sc_cm_cap, &sc->sc_acm_cap);
308 /* get the data interface number */
310 cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
312 if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) {
314 cud = usbd_find_descriptor(uaa->device, NULL,
315 uaa->info.bIfaceIndex, UDESC_CS_INTERFACE,
316 0 - 1, UDESCSUB_CDC_UNION, 0 - 1);
318 if ((cud == NULL) || (cud->bLength < sizeof(*cud))) {
319 DPRINTF("Missing descriptor. "
320 "Assuming data interface is next.\n");
321 if (sc->sc_ctrl_iface_no == 0xFF) {
324 uint8_t class_match = 0;
326 /* set default interface number */
327 sc->sc_data_iface_no = 0xFF;
329 /* try to find the data interface backwards */
330 umodem_find_data_iface(uaa,
331 uaa->info.bIfaceIndex - 1,
332 &sc->sc_data_iface_no, &class_match);
334 /* try to find the data interface forwards */
335 umodem_find_data_iface(uaa,
336 uaa->info.bIfaceIndex + 1,
337 &sc->sc_data_iface_no, &class_match);
339 /* check if nothing was found */
340 if (sc->sc_data_iface_no == 0xFF)
344 sc->sc_data_iface_no = cud->bSlaveInterface[0];
347 sc->sc_data_iface_no = cmd->bDataInterface;
350 device_printf(dev, "data interface %d, has %sCM over "
351 "data, has %sbreak\n",
352 sc->sc_data_iface_no,
353 sc->sc_cm_cap & USB_CDC_CM_OVER_DATA ? "" : "no ",
354 sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK ? "" : "no ");
356 /* get the data interface too */
359 struct usb_interface *iface;
360 struct usb_interface_descriptor *id;
362 iface = usbd_get_iface(uaa->device, i);
366 id = usbd_get_interface_descriptor(iface);
368 if (id && (id->bInterfaceNumber == sc->sc_data_iface_no)) {
369 sc->sc_iface_index[0] = i;
370 usbd_set_parent_iface(uaa->device, i, uaa->info.bIfaceIndex);
374 device_printf(dev, "no data interface\n");
379 if (usb_test_quirk(uaa, UQ_ASSUME_CM_OVER_DATA)) {
380 sc->sc_cm_over_data = 1;
382 if (sc->sc_cm_cap & USB_CDC_CM_OVER_DATA) {
383 if (sc->sc_acm_cap & USB_CDC_ACM_HAS_FEATURE) {
385 error = umodem_set_comm_feature
386 (uaa->device, sc->sc_ctrl_iface_no,
387 UCDC_ABSTRACT_STATE, UCDC_DATA_MULTIPLEXED);
389 /* ignore any errors */
391 sc->sc_cm_over_data = 1;
394 error = usbd_transfer_setup(uaa->device,
395 sc->sc_iface_index, sc->sc_xfer,
396 umodem_config, UMODEM_N_TRANSFER,
402 /* clear stall at first run */
403 mtx_lock(&sc->sc_mtx);
404 usbd_xfer_set_stall(sc->sc_xfer[UMODEM_BULK_WR]);
405 usbd_xfer_set_stall(sc->sc_xfer[UMODEM_BULK_RD]);
406 mtx_unlock(&sc->sc_mtx);
408 error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
409 &umodem_callback, &sc->sc_mtx);
413 ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
423 umodem_find_data_iface(struct usb_attach_arg *uaa,
424 uint8_t iface_index, uint8_t *p_data_no, uint8_t *p_match_class)
426 struct usb_interface_descriptor *id;
427 struct usb_interface *iface;
429 iface = usbd_get_iface(uaa->device, iface_index);
431 /* check for end of interfaces */
435 id = usbd_get_interface_descriptor(iface);
437 /* check for non-matching interface class */
438 if (id->bInterfaceClass != UICLASS_CDC_DATA ||
439 id->bInterfaceSubClass != UISUBCLASS_DATA) {
440 /* if we got a class match then return */
447 DPRINTFN(11, "Match at index %u\n", iface_index);
449 *p_data_no = id->bInterfaceNumber;
453 umodem_start_read(struct ucom_softc *ucom)
455 struct umodem_softc *sc = ucom->sc_parent;
457 /* start interrupt endpoint, if any */
458 usbd_transfer_start(sc->sc_xfer[UMODEM_INTR_RD]);
460 /* start read endpoint */
461 usbd_transfer_start(sc->sc_xfer[UMODEM_BULK_RD]);
465 umodem_stop_read(struct ucom_softc *ucom)
467 struct umodem_softc *sc = ucom->sc_parent;
469 /* stop interrupt endpoint, if any */
470 usbd_transfer_stop(sc->sc_xfer[UMODEM_INTR_RD]);
472 /* stop read endpoint */
473 usbd_transfer_stop(sc->sc_xfer[UMODEM_BULK_RD]);
477 umodem_start_write(struct ucom_softc *ucom)
479 struct umodem_softc *sc = ucom->sc_parent;
481 usbd_transfer_start(sc->sc_xfer[UMODEM_BULK_WR]);
485 umodem_stop_write(struct ucom_softc *ucom)
487 struct umodem_softc *sc = ucom->sc_parent;
489 usbd_transfer_stop(sc->sc_xfer[UMODEM_BULK_WR]);
493 umodem_get_caps(struct usb_attach_arg *uaa, uint8_t *cm, uint8_t *acm)
495 struct usb_cdc_cm_descriptor *cmd;
496 struct usb_cdc_acm_descriptor *cad;
498 cmd = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_CM);
499 if ((cmd == NULL) || (cmd->bLength < sizeof(*cmd))) {
500 DPRINTF("no CM desc (faking one)\n");
501 *cm = USB_CDC_CM_DOES_CM | USB_CDC_CM_OVER_DATA;
503 *cm = cmd->bmCapabilities;
505 cad = umodem_get_desc(uaa, UDESC_CS_INTERFACE, UDESCSUB_CDC_ACM);
506 if ((cad == NULL) || (cad->bLength < sizeof(*cad))) {
507 DPRINTF("no ACM desc\n");
510 *acm = cad->bmCapabilities;
514 umodem_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
516 struct umodem_softc *sc = ucom->sc_parent;
525 umodem_pre_param(struct ucom_softc *ucom, struct termios *t)
527 return (0); /* we accept anything */
531 umodem_cfg_param(struct ucom_softc *ucom, struct termios *t)
533 struct umodem_softc *sc = ucom->sc_parent;
534 struct usb_cdc_line_state ls;
535 struct usb_device_request req;
537 DPRINTF("sc=%p\n", sc);
539 bzero(&ls, sizeof(ls));
541 USETDW(ls.dwDTERate, t->c_ospeed);
543 ls.bCharFormat = (t->c_cflag & CSTOPB) ?
544 UCDC_STOP_BIT_2 : UCDC_STOP_BIT_1;
546 ls.bParityType = (t->c_cflag & PARENB) ?
547 ((t->c_cflag & PARODD) ?
548 UCDC_PARITY_ODD : UCDC_PARITY_EVEN) : UCDC_PARITY_NONE;
550 switch (t->c_cflag & CSIZE) {
565 DPRINTF("rate=%d fmt=%d parity=%d bits=%d\n",
566 UGETDW(ls.dwDTERate), ls.bCharFormat,
567 ls.bParityType, ls.bDataBits);
569 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
570 req.bRequest = UCDC_SET_LINE_CODING;
571 USETW(req.wValue, 0);
572 req.wIndex[0] = sc->sc_ctrl_iface_no;
574 USETW(req.wLength, sizeof(ls));
576 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
581 umodem_ioctl(struct ucom_softc *ucom, uint32_t cmd, caddr_t data,
582 int flag, struct thread *td)
584 struct umodem_softc *sc = ucom->sc_parent;
587 DPRINTF("cmd=0x%08x\n", cmd);
590 case USB_GET_CM_OVER_DATA:
591 *(int *)data = sc->sc_cm_over_data;
594 case USB_SET_CM_OVER_DATA:
595 if (*(int *)data != sc->sc_cm_over_data) {
601 DPRINTF("unknown\n");
610 umodem_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
612 struct umodem_softc *sc = ucom->sc_parent;
613 struct usb_device_request req;
615 DPRINTF("onoff=%d\n", onoff);
618 sc->sc_line |= UCDC_LINE_DTR;
620 sc->sc_line &= ~UCDC_LINE_DTR;
622 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
623 req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
624 USETW(req.wValue, sc->sc_line);
625 req.wIndex[0] = sc->sc_ctrl_iface_no;
627 USETW(req.wLength, 0);
629 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
630 &req, NULL, 0, 1000);
634 umodem_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
636 struct umodem_softc *sc = ucom->sc_parent;
637 struct usb_device_request req;
639 DPRINTF("onoff=%d\n", onoff);
642 sc->sc_line |= UCDC_LINE_RTS;
644 sc->sc_line &= ~UCDC_LINE_RTS;
646 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
647 req.bRequest = UCDC_SET_CONTROL_LINE_STATE;
648 USETW(req.wValue, sc->sc_line);
649 req.wIndex[0] = sc->sc_ctrl_iface_no;
651 USETW(req.wLength, 0);
653 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
654 &req, NULL, 0, 1000);
658 umodem_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
660 struct umodem_softc *sc = ucom->sc_parent;
661 struct usb_device_request req;
664 DPRINTF("onoff=%d\n", onoff);
666 if (sc->sc_acm_cap & USB_CDC_ACM_HAS_BREAK) {
668 temp = onoff ? UCDC_BREAK_ON : UCDC_BREAK_OFF;
670 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
671 req.bRequest = UCDC_SEND_BREAK;
672 USETW(req.wValue, temp);
673 req.wIndex[0] = sc->sc_ctrl_iface_no;
675 USETW(req.wLength, 0);
677 ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
678 &req, NULL, 0, 1000);
683 umodem_intr_callback(struct usb_xfer *xfer, usb_error_t error)
685 struct usb_cdc_notification pkt;
686 struct umodem_softc *sc = usbd_xfer_softc(xfer);
687 struct usb_page_cache *pc;
691 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
693 switch (USB_GET_STATE(xfer)) {
694 case USB_ST_TRANSFERRED:
697 DPRINTF("received short packet, "
698 "%d bytes\n", actlen);
701 if (actlen > sizeof(pkt)) {
702 DPRINTF("truncating message\n");
703 actlen = sizeof(pkt);
705 pc = usbd_xfer_get_frame(xfer, 0);
706 usbd_copy_out(pc, 0, &pkt, actlen);
710 wLen = UGETW(pkt.wLength);
714 if (pkt.bmRequestType != UCDC_NOTIFICATION) {
715 DPRINTF("unknown message type, "
716 "0x%02x, on notify pipe!\n",
720 switch (pkt.bNotification) {
721 case UCDC_N_SERIAL_STATE:
723 * Set the serial state in ucom driver based on
724 * the bits from the notify message
727 DPRINTF("invalid notification "
728 "length, %d bytes!\n", actlen);
731 DPRINTF("notify bytes = %02x%02x\n",
735 /* Currently, lsr is always zero. */
739 if (pkt.data[0] & UCDC_N_SERIAL_RI) {
740 sc->sc_msr |= SER_RI;
742 if (pkt.data[0] & UCDC_N_SERIAL_DSR) {
743 sc->sc_msr |= SER_DSR;
745 if (pkt.data[0] & UCDC_N_SERIAL_DCD) {
746 sc->sc_msr |= SER_DCD;
748 ucom_status_change(&sc->sc_ucom);
752 DPRINTF("unknown notify message: 0x%02x\n",
759 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
760 usbd_transfer_submit(xfer);
764 if (error != USB_ERR_CANCELLED) {
765 /* try to clear stall first */
766 usbd_xfer_set_stall(xfer);
775 umodem_write_callback(struct usb_xfer *xfer, usb_error_t error)
777 struct umodem_softc *sc = usbd_xfer_softc(xfer);
778 struct usb_page_cache *pc;
781 switch (USB_GET_STATE(xfer)) {
783 case USB_ST_TRANSFERRED:
785 pc = usbd_xfer_get_frame(xfer, 0);
786 if (ucom_get_data(&sc->sc_ucom, pc, 0,
787 UMODEM_BUF_SIZE, &actlen)) {
789 usbd_xfer_set_frame_len(xfer, 0, actlen);
790 usbd_transfer_submit(xfer);
795 if (error != USB_ERR_CANCELLED) {
796 /* try to clear stall first */
797 usbd_xfer_set_stall(xfer);
805 umodem_read_callback(struct usb_xfer *xfer, usb_error_t error)
807 struct umodem_softc *sc = usbd_xfer_softc(xfer);
808 struct usb_page_cache *pc;
811 usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
813 switch (USB_GET_STATE(xfer)) {
814 case USB_ST_TRANSFERRED:
816 DPRINTF("actlen=%d\n", actlen);
818 pc = usbd_xfer_get_frame(xfer, 0);
819 ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
823 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
824 usbd_transfer_submit(xfer);
828 if (error != USB_ERR_CANCELLED) {
829 /* try to clear stall first */
830 usbd_xfer_set_stall(xfer);
838 umodem_get_desc(struct usb_attach_arg *uaa, uint8_t type, uint8_t subtype)
840 return (usbd_find_descriptor(uaa->device, NULL, uaa->info.bIfaceIndex,
841 type, 0 - 1, subtype, 0 - 1));
845 umodem_set_comm_feature(struct usb_device *udev, uint8_t iface_no,
846 uint16_t feature, uint16_t state)
848 struct usb_device_request req;
849 struct usb_cdc_abstract_state ast;
851 DPRINTF("feature=%d state=%d\n",
854 req.bmRequestType = UT_WRITE_CLASS_INTERFACE;
855 req.bRequest = UCDC_SET_COMM_FEATURE;
856 USETW(req.wValue, feature);
857 req.wIndex[0] = iface_no;
859 USETW(req.wLength, UCDC_ABSTRACT_STATE_LENGTH);
860 USETW(ast.wState, state);
862 return (usbd_do_request(udev, NULL, &req, &ast));
866 umodem_detach(device_t dev)
868 struct umodem_softc *sc = device_get_softc(dev);
870 DPRINTF("sc=%p\n", sc);
872 ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
873 usbd_transfer_unsetup(sc->sc_xfer, UMODEM_N_TRANSFER);
874 mtx_destroy(&sc->sc_mtx);
880 umodem_poll(struct ucom_softc *ucom)
882 struct umodem_softc *sc = ucom->sc_parent;
883 usbd_transfer_poll(sc->sc_xfer, UMODEM_N_TRANSFER);