- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.

[FreeBSD/releng/9.2.git] / cddl / contrib / opensolaris / cmd / lockstat / lockstat.1

'\" te
.\" CDDL HEADER START
.\"
.\" The contents of this file are subject to the terms of the
.\" Common Development and Distribution License (the "License").  
.\" You may not use this file except in compliance with the License.
.\"
.\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
.\" or http://www.opensolaris.org/os/licensing.
.\" See the License for the specific language governing permissions
.\" and limitations under the License.
.\"
.\" When distributing Covered Code, include this CDDL HEADER in each
.\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
.\" If applicable, add the following below this CDDL HEADER, with the
.\" fields enclosed by brackets "[]" replaced with your own identifying
.\" information: Portions Copyright [yyyy] [name of copyright owner]
.\"
.\" CDDL HEADER END
.\" Copyright (c) 2008, Sun Microsystems, Inc. All Rights Reserved.
.TH lockstat 1M "28 Feb 2008" "SunOS 5.11" "System Administration Commands"
.SH NAME
lockstat \- report kernel lock and profiling statistics
.SH SYNOPSIS
.LP
.nf
\fBlockstat\fR [\fB-ACEHI\fR] [\fB-e\fR \fIevent_list\fR] [\fB-i\fR \fIrate\fR] 
    [\fB-b\fR | \fB-t\fR | \fB-h\fR | \fB-s\fR \fIdepth\fR] [\fB-n\fR \fInrecords\fR] 
    [\fB-l\fR \fIlock\fR [, \fIsize\fR]] [\fB-d\fR \fIduration\fR] 
    [\fB-f\fR \fIfunction\fR [, \fIsize\fR]] [\fB-T\fR] [\fB-ckgwWRpP\fR] [\fB-D\fR \fIcount\fR] 
    [\fB-o\fR \fIfilename\fR] [\fB-x\fR \fIopt\fR [=val]] \fIcommand\fR [\fIargs\fR]
.fi

.SH DESCRIPTION
.sp
.LP
The \fBlockstat\fR utility gathers and displays kernel locking and profiling statistics. \fBlockstat\fR allows you to specify which events to watch (for example, spin on adaptive mutex, block on read access to rwlock due to waiting writers, and so forth) how much
data to gather for each event, and how to display the data. By default, \fBlockstat\fR monitors all lock contention events, gathers frequency and timing data about those events, and displays the data in decreasing frequency order, so that the most common events appear first.
.sp
.LP
\fBlockstat\fR gathers data until the specified command completes. For example, to gather statistics for a fixed-time interval, use \fBsleep\fR(1) as
the command, as follows:
.sp
.LP
\fBexample#\fR \fBlockstat\fR \fBsleep\fR \fB5\fR
.sp
.LP
When the \fB-I\fR option is specified, \fBlockstat\fR establishes a per-processor high-level periodic interrupt source to gather profiling data. The interrupt handler simply generates a \fBlockstat\fR event whose caller is the interrupted PC (program counter).
The profiling event is just like any other \fBlockstat\fR event, so all of the normal \fBlockstat\fR options are applicable.
.sp
.LP
\fBlockstat\fR relies on DTrace to modify the running kernel's text to intercept events of interest. This imposes a small but measurable overhead on all system activity, so access to \fBlockstat\fR is restricted to super-user by default. The system administrator
can permit other users to use \fBlockstat\fR by granting them additional DTrace privileges. Refer to the \fISolaris Dynamic Tracing Guide\fR for more information about DTrace security features.
.SH OPTIONS
.sp
.LP
The following options are supported: 
.SS "Event Selection"
.sp
.LP
If no event selection options are specified, the default is \fB-C\fR.
.sp
.ne 2
.mk
.na
\fB\fB-A\fR\fR
.ad
.sp .6
.RS 4n
Watch all lock events. \fB-A\fR is equivalent to \fB-CH\fR.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-C\fR\fR
.ad
.sp .6
.RS 4n
Watch contention events. 
.RE

.sp
.ne 2
.mk
.na
\fB\fB-E\fR\fR
.ad
.sp .6
.RS 4n
Watch error events.
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-e\fR \fIevent_list\fR\fR
.ad
.sp .6
.RS 4n
Only watch the specified events. \fIevent\fR \fIlist\fR is a comma-separated list of events or ranges of events such as 1,4-7,35. Run \fBlockstat\fR with no arguments to get a brief description of all events.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-H\fR\fR
.ad
.sp .6
.RS 4n
Watch hold events.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-I\fR\fR
.ad
.sp .6
.RS 4n
Watch profiling interrupt events.
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-i\fR \fIrate\fR\fR
.ad
.sp .6
.RS 4n
Interrupt rate (per second) for \fB-I\fR. The default is 97 Hz, so that profiling doesn't run in lockstep with the clock interrupt (which runs at 100 Hz).
.RE

.SS "Data Gathering"
.sp
.ne 2
.mk
.na
\fB\fB-x\fR \fIarg\fR[=\fIval\fR]\fR
.ad
.sp .6
.RS 4n
Enable or modify a DTrace runtime option or D compiler option. The list of options is found in the \fI\fR. Boolean options are enabled by specifying their name. Options with values are set by separating the option name and
value with an equals sign (=).
.RE

.SS "Data Gathering (Mutually Exclusive)"
.sp
.ne 2
.mk
.na
\fB\fB-b\fR\fR
.ad
.sp .6
.RS 4n
Basic statistics: lock, caller, number of events.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-h\fR\fR
.ad
.sp .6
.RS 4n
Histogram: Timing plus time-distribution histograms.
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-s\fR \fIdepth\fR\fR
.ad
.sp .6
.RS 4n
Stack trace: Histogram plus stack traces up to \fIdepth\fR frames deep.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-t\fR\fR
.ad
.sp .6
.RS 4n
Timing: Basic plus timing for all events [default].
.RE

.SS "Data Filtering"
.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-d\fR \fIduration\fR\fR
.ad
.sp .6
.RS 4n
Only watch events longer than \fIduration\fR.
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-f\fR \fIfunc[,size]\fR\fR
.ad
.sp .6
.RS 4n
Only watch events generated by \fIfunc\fR, which can be specified as a symbolic name or hex address. \fIsize\fR defaults to the \fBELF\fR symbol size if available, or \fB1\fR if not.
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-l\fR \fIlock[,size]\fR\fR
.ad
.sp .6
.RS 4n
Only watch \fIlock\fR, which can be specified as a symbolic name or hex address. \fBsize\fR defaults to the \fBELF\fR symbol size or \fB1\fR if the symbol size is not available.
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-n\fR \fInrecords\fR\fR
.ad
.sp .6
.RS 4n
Maximum number of data records.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-T\fR\fR
.ad
.sp .6
.RS 4n
Trace (rather than sample) events [off by default].
.RE

.SS "Data Reporting"
.sp
.ne 2
.mk
.na
\fB\fB-c\fR\fR
.ad
.sp .6
.RS 4n
Coalesce lock data for lock arrays (for example, \fBpse_mutex[]\fR).
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-D\fR \fIcount\fR\fR
.ad
.sp .6
.RS 4n
Only display the top \fIcount\fR events of each type.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-g\fR\fR
.ad
.sp .6
.RS 4n
Show total events generated by function. For example, if \fBfoo()\fR calls \fBbar()\fR in a loop, the work done by \fBbar()\fR counts as work generated by \fBfoo()\fR (along with any work done by \fBfoo()\fR itself).
The \fB-g\fR option works by counting the total number of stack frames in which each function appears. This implies two things: (1) the data reported by \fB-g\fR can be misleading if the stack traces are not deep enough, and (2) functions that are called recursively might show
greater than 100% activity. In light of issue (1), the default data gathering mode when using \fB-g\fR is \fB-s\fR \fB50\fR.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-k\fR\fR
.ad
.sp .6
.RS 4n
Coalesce PCs within functions.
.RE

.sp
.ne 2
.mk
.na
\fB\fB\fR\fB-o\fR \fIfilename\fR\fR
.ad
.sp .6
.RS 4n
Direct output to \fIfilename\fR.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-P\fR\fR
.ad
.sp .6
.RS 4n
Sort data by (\fIcount * time\fR) product.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-p\fR\fR
.ad
.sp .6
.RS 4n
Parsable output format.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-R\fR\fR
.ad
.sp .6
.RS 4n
Display rates (events per second) rather than counts.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-W\fR\fR
.ad
.sp .6
.RS 4n
Whichever: distinguish events only by caller, not by lock.
.RE

.sp
.ne 2
.mk
.na
\fB\fB-w\fR\fR
.ad
.sp .6
.RS 4n
Wherever: distinguish events only by lock, not by caller.
.RE

.SH DISPLAY FORMATS
.sp
.LP
The following headers appear over various columns of data.
.sp
.ne 2
.mk
.na
\fB\fBCount\fR or \fBops/s\fR\fR
.ad
.sp .6
.RS 4n
Number of times this event occurred, or the rate (times per second) if \fB-R\fR was specified.
.RE

.sp
.ne 2
.mk
.na
\fB\fBindv\fR\fR
.ad
.sp .6
.RS 4n
Percentage of all events represented by this individual event.
.RE

.sp
.ne 2
.mk
.na
\fB\fBgenr\fR\fR
.ad
.sp .6
.RS 4n
Percentage of all events generated by this function.
.RE

.sp
.ne 2
.mk
.na
\fB\fBcuml\fR\fR
.ad
.sp .6
.RS 4n
Cumulative percentage; a running total of the individuals.
.RE

.sp
.ne 2
.mk
.na
\fB\fBrcnt\fR\fR
.ad
.sp .6
.RS 4n
Average reference count. This will always be \fB1\fR for exclusive locks (mutexes, spin locks, rwlocks held as writer) but can be greater than \fB1\fR for shared locks (rwlocks held as reader).
.RE

.sp
.ne 2
.mk
.na
\fB\fBnsec\fR\fR
.ad
.sp .6
.RS 4n
Average duration of the events in nanoseconds, as appropriate for the event. For the profiling event, duration means interrupt latency.
.RE

.sp
.ne 2
.mk
.na
\fB\fBLock\fR\fR
.ad
.sp .6
.RS 4n
Address of the lock; displayed symbolically if possible.
.RE

.sp
.ne 2
.mk
.na
\fB\fBCPU+PIL\fR\fR
.ad
.sp .6
.RS 4n
\fBCPU\fR plus processor interrupt level (\fBPIL\fR). For example, if \fBCPU\fR 4 is interrupted while at \fBPIL\fR 6, this will be reported as \fBcpu[4]+6\fR.
.RE

.sp
.ne 2
.mk
.na
\fB\fBCaller\fR\fR
.ad
.sp .6
.RS 4n
Address of the caller; displayed symbolically if possible.
.RE

.SH EXAMPLES
.LP
\fBExample 1 \fRMeasuring Kernel Lock Contention
.sp
.in +2
.nf
example# \fBlockstat sleep 5\fR
Adaptive mutex spin: 2210 events in 5.055 seconds (437 events/sec)
.fi
.in -2
.sp

.sp
.in +2
.nf
Count indv cuml rcnt     nsec Lock                Caller
------------------------------------------------------------------------
 269  12%  12% 1.00     2160 service_queue       background+0xdc
 249  11%  23% 1.00       86 service_queue       qenable_locked+0x64
 228  10%  34% 1.00      131 service_queue       background+0x15c
  68   3%  37% 1.00       79 0x30000024070       untimeout+0x1c
  59   3%  40% 1.00      384 0x300066fa8e0       background+0xb0
  43   2%  41% 1.00       30 rqcred_lock         svc_getreq+0x3c
  42   2%  43% 1.00      341 0x30006834eb8       background+0xb0
  41   2%  45% 1.00      135 0x30000021058       untimeout+0x1c
  40   2%  47% 1.00       39 rqcred_lock         svc_getreq+0x260
  37   2%  49% 1.00     2372 0x300068e83d0       hmestart+0x1c4
  36   2%  50% 1.00       77 0x30000021058       timeout_common+0x4
  36   2%  52% 1.00      354 0x300066fa120       background+0xb0
  32   1%  53% 1.00       97 0x30000024070       timeout_common+0x4
  31   1%  55% 1.00     2923 0x300069883d0       hmestart+0x1c4
  29   1%  56% 1.00      366 0x300066fb290       background+0xb0
  28   1%  57% 1.00      117 0x3000001e040       untimeout+0x1c
  25   1%  59% 1.00       93 0x3000001e040       timeout_common+0x4
  22   1%  60% 1.00       25 0x30005161110       sync_stream_buf+0xdc
  21   1%  60% 1.00      291 0x30006834eb8       putq+0xa4
  19   1%  61% 1.00       43 0x3000515dcb0       mdf_alloc+0xc
  18   1%  62% 1.00      456 0x30006834eb8       qenable+0x8
  18   1%  63% 1.00       61 service_queue       queuerun+0x168
  17   1%  64% 1.00      268 0x30005418ee8       vmem_free+0x3c
[...]

R/W reader blocked by writer: 76 events in 5.055 seconds (15 events/sec)

Count indv cuml rcnt     nsec Lock                Caller
------------------------------------------------------------------------
  23  30%  30% 1.00 22590137 0x300098ba358       ufs_dirlook+0xd0
  17  22%  53% 1.00  5820995 0x3000ad815e8       find_bp+0x10
  13  17%  70% 1.00  2639918 0x300098ba360       ufs_iget+0x198
   4   5%  75% 1.00  3193015 0x300098ba360       ufs_getattr+0x54
   3   4%  79% 1.00  7953418 0x3000ad817c0       find_bp+0x10
   3   4%  83% 1.00   935211 0x3000ad815e8       find_read_lof+0x14
   2   3%  86% 1.00 16357310 0x300073a4720       find_bp+0x10
   2   3%  88% 1.00  2072433 0x300073a4720       find_read_lof+0x14
   2   3%  91% 1.00  1606153 0x300073a4370       find_bp+0x10
   1   1%  92% 1.00  2656909 0x300107e7400       ufs_iget+0x198
[...]
.fi
.in -2
.sp

.LP
\fBExample 2 \fRMeasuring Hold Times
.sp
.in +2
.nf
example# \fBlockstat -H -D 10 sleep 1\fR
Adaptive mutex spin: 513 events
.fi
.in -2
.sp

.sp
.in +2
.nf
Count indv cuml rcnt     nsec Lock                Caller
-------------------------------------------------------------------------
 480   5%   5% 1.00     1136 0x300007718e8       putnext+0x40
 286   3%   9% 1.00      666 0x3000077b430       getf+0xd8
 271   3%  12% 1.00      537 0x3000077b430       msgio32+0x2fc
 270   3%  15% 1.00     3670 0x300007718e8       strgetmsg+0x3d4
 270   3%  18% 1.00     1016 0x300007c38b0       getq_noenab+0x200
 264   3%  20% 1.00     1649 0x300007718e8       strgetmsg+0xa70
 216   2%  23% 1.00     6251 tcp_mi_lock         tcp_snmp_get+0xfc
 206   2%  25% 1.00      602 thread_free_lock    clock+0x250
 138   2%  27% 1.00      485 0x300007c3998       putnext+0xb8
 138   2%  28% 1.00     3706 0x300007718e8       strrput+0x5b8
-------------------------------------------------------------------------
[...]
.fi
.in -2
.sp

.LP
\fBExample 3 \fRMeasuring Hold Times for Stack Traces Containing a Specific Function
.sp
.in +2
.nf
example# \fBlockstat -H -f tcp_rput_data -s 50 -D 10 sleep 1\fR
Adaptive mutex spin: 11 events in 1.023 seconds (11
events/sec)
.fi
.in -2
.sp

.sp
.in +2
.nf
-------------------------------------------------------------------------
Count indv cuml rcnt     nsec Lock                   Caller
   9  82%  82% 1.00     2540 0x30000031380          tcp_rput_data+0x2b90

     nsec ------ Time Distribution ------ count     Stack
      256 |@@@@@@@@@@@@@@@@               5         tcp_rput_data+0x2b90
      512 |@@@@@@                         2         putnext+0x78
     1024 |@@@                            1         ip_rput+0xec4
     2048 |                               0         _c_putnext+0x148
     4096 |                               0         hmeread+0x31c
     8192 |                               0         hmeintr+0x36c
    16384 |@@@                            1
sbus_intr_wrapper+0x30
[...]

Count indv cuml rcnt     nsec Lock                   Caller
   1   9%  91% 1.00     1036 0x30000055380          freemsg+0x44

     nsec ------ Time Distribution ------ count     Stack
     1024 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@ 1         freemsg+0x44
                                                    tcp_rput_data+0x2fd0
                                                    putnext+0x78
                                                    ip_rput+0xec4
                                                    _c_putnext+0x148
                                                    hmeread+0x31c
                                                    hmeintr+0x36c

sbus_intr_wrapper+0x30
-------------------------------------------------------------------------
[...]
.fi
.in -2
.sp

.LP
\fBExample 4 \fRBasic Kernel Profiling
.sp
.LP
For basic profiling, we don't care whether the profiling interrupt sampled \fBfoo()\fR\fB+0x4c\fR or \fBfoo()\fR\fB+0x78\fR; we care only that it sampled somewhere in \fBfoo()\fR, so we use \fB-k\fR. The \fBCPU\fR and \fBPIL\fR aren't relevant to basic profiling because we are measuring the system as a whole, not a particular \fBCPU\fR or interrupt level, so we use \fB-W\fR.

.sp
.in +2
.nf
example# \fBlockstat -kIW -D 20 ./polltest\fR
Profiling interrupt: 82 events in 0.424 seconds (194
events/sec)
.fi
.in -2
.sp

.sp
.in +2
.nf
Count indv cuml rcnt     nsec Hottest CPU+PIL     Caller
-----------------------------------------------------------------------
   8  10%  10% 1.00      698 cpu[1]              utl0
   6   7%  17% 1.00      299 cpu[0]              read
   5   6%  23% 1.00      124 cpu[1]              getf
   4   5%  28% 1.00      327 cpu[0]              fifo_read
   4   5%  33% 1.00      112 cpu[1]              poll
   4   5%  38% 1.00      212 cpu[1]              uiomove
   4   5%  43% 1.00      361 cpu[1]              mutex_tryenter
   3   4%  46% 1.00      682 cpu[0]              write
   3   4%  50% 1.00       89 cpu[0]              pcache_poll
   3   4%  54% 1.00      118 cpu[1]              set_active_fd
   3   4%  57% 1.00      105 cpu[0]              syscall_trap32
   3   4%  61% 1.00      640 cpu[1]              (usermode)
   2   2%  63% 1.00      127 cpu[1]              fifo_poll
   2   2%  66% 1.00      300 cpu[1]              fifo_write
   2   2%  68% 1.00      669 cpu[0]              releasef
   2   2%  71% 1.00      112 cpu[1]              bt_getlowbit
   2   2%  73% 1.00      247 cpu[1]              splx
   2   2%  76% 1.00      503 cpu[0]              mutex_enter
   2   2%  78% 1.00      467 cpu[0]+10           disp_lock_enter
   2   2%  80% 1.00      139 cpu[1]              default_copyin
-----------------------------------------------------------------------
[...]
.fi
.in -2
.sp

.LP
\fBExample 5 \fRGenerated-load Profiling
.sp
.LP
In the example above, 5% of the samples were in \fBpoll()\fR. This tells us how much time was spent inside \fBpoll()\fR itself, but tells us nothing about how much work was \fBgenerated\fR by \fBpoll()\fR; that is, how much time we spent
in functions called by \fBpoll()\fR. To determine that, we use the \fB-g\fR option. The example below shows that although \fBpolltest\fR spends only 5% of its time in \fBpoll()\fR itself, \fBpoll()\fR-induced work accounts for 34% of
the load.

.sp
.LP
Note that the functions that generate the profiling interrupt (\fBlockstat_intr()\fR, \fBcyclic_fire()\fR, and so forth) appear in every stack trace, and therefore are considered to have generated 100% of the load. This illustrates an important point: the generated
load percentages do \fBnot\fR add up to 100% because they are not independent. If 72% of all stack traces contain both \fBfoo()\fR and \fBbar()\fR, then both \fBfoo()\fR and \fBbar()\fR are 72% load generators.

.sp
.in +2
.nf
example# \fBlockstat -kgIW -D 20 ./polltest\fR
Profiling interrupt: 80 events in 0.412 seconds (194 events/sec)
.fi
.in -2
.sp

.sp
.in +2
.nf
Count genr cuml rcnt     nsec Hottest CPU+PIL     Caller
-------------------------------------------------------------------------
  80 100% ---- 1.00      310 cpu[1]              lockstat_intr
  80 100% ---- 1.00      310 cpu[1]              cyclic_fire
  80 100% ---- 1.00      310 cpu[1]              cbe_level14
  80 100% ---- 1.00      310 cpu[1]              current_thread
  27  34% ---- 1.00      176 cpu[1]              poll
  20  25% ---- 1.00      221 cpu[0]              write
  19  24% ---- 1.00      249 cpu[1]              read
  17  21% ---- 1.00      232 cpu[0]              write32
  17  21% ---- 1.00      207 cpu[1]              pcache_poll
  14  18% ---- 1.00      319 cpu[0]              fifo_write
  13  16% ---- 1.00      214 cpu[1]              read32
  10  12% ---- 1.00      208 cpu[1]              fifo_read
  10  12% ---- 1.00      787 cpu[1]              utl0
   9  11% ---- 1.00      178 cpu[0]              pcacheset_resolve
   9  11% ---- 1.00      262 cpu[0]              uiomove
   7   9% ---- 1.00      506 cpu[1]              (usermode)
   5   6% ---- 1.00      195 cpu[1]              fifo_poll
   5   6% ---- 1.00      136 cpu[1]              syscall_trap32
   4   5% ---- 1.00      139 cpu[0]              releasef
   3   4% ---- 1.00      277 cpu[1]              polllock
-------------------------------------------------------------------------
[...]
.fi
.in -2
.sp

.LP
\fBExample 6 \fRGathering Lock Contention and Profiling Data for a Specific Module
.sp
.LP
In this example we use the \fB-f\fR option not to specify a single function, but rather to specify the entire text space of the \fBsbus\fR module. We gather both lock contention and profiling statistics so that contention can be correlated with overall load on the
module. 

.sp
.in +2
.nf
example# \fBmodinfo | grep sbus\fR
24 102a8b6f   b8b4  59   1  sbus (SBus (sysio) nexus driver)
.fi
.in -2
.sp

.sp
.in +2
.nf
example# \fBlockstat -kICE -f 0x102a8b6f,0xb8b4 sleep 10\fR
Adaptive mutex spin: 39 events in 10.042 seconds (4 events/sec)
.fi
.in -2
.sp

.sp
.in +2
.nf
Count indv cuml rcnt     nsec Lock               Caller
-------------------------------------------------------------------------
  15  38%  38% 1.00      206 0x30005160528      sync_stream_buf
   7  18%  56% 1.00       14 0x30005160d18      sync_stream_buf
   6  15%  72% 1.00       27 0x300060c3118      sync_stream_buf
   5  13%  85% 1.00       24 0x300060c3510      sync_stream_buf
   2   5%  90% 1.00       29 0x300060c2d20      sync_stream_buf
   2   5%  95% 1.00       24 0x30005161cf8      sync_stream_buf
   1   3%  97% 1.00       21 0x30005161110      sync_stream_buf
   1   3% 100% 1.00       23 0x30005160130      sync_stream_buf
[...]

Adaptive mutex block: 9 events in 10.042 seconds (1 events/sec)

Count indv cuml rcnt     nsec Lock               Caller
-------------------------------------------------------------------------
   4  44%  44% 1.00   156539 0x30005160528      sync_stream_buf
   2  22%  67% 1.00   763516 0x30005160d18      sync_stream_buf
   1  11%  78% 1.00   462130 0x300060c3510      sync_stream_buf
   1  11%  89% 1.00   288749 0x30005161110      sync_stream_buf
   1  11% 100% 1.00  1015374 0x30005160130      sync_stream_buf
[...]

Profiling interrupt: 229 events in 10.042 seconds (23 events/sec)

Count indv cuml rcnt     nsec Hottest CPU+PIL    Caller

-------------------------------------------------------------------------
  89  39%  39% 1.00      426 cpu[0]+6           sync_stream_buf
  64  28%  67% 1.00      398 cpu[0]+6           sbus_intr_wrapper
  23  10%  77% 1.00      324 cpu[0]+6           iommu_dvma_kaddr_load
  21   9%  86% 1.00      512 cpu[0]+6           iommu_tlb_flush
  14   6%  92% 1.00      342 cpu[0]+6           iommu_dvma_unload
  13   6%  98% 1.00      306 cpu[1]             iommu_dvma_sync
   5   2% 100% 1.00      389 cpu[1]             iommu_dma_bindhdl
-------------------------------------------------------------------------
[...]
.fi
.in -2
.sp

.LP
\fBExample 7 \fRDetermining the Average PIL (processor interrupt level) for a CPU
.sp
.in +2
.nf
example# \fBlockstat -Iw -l cpu[3] ./testprog\fR

Profiling interrupt: 14791 events in 152.463 seconds (97 events/sec)

Count indv cuml rcnt     nsec CPU+PIL             Hottest Caller

-----------------------------------------------------------------------
13641  92%  92% 1.00      253 cpu[3]              (usermode)
 579   4%  96% 1.00      325 cpu[3]+6            ip_ocsum+0xe8
 375   3%  99% 1.00      411 cpu[3]+10           splx
 154   1% 100% 1.00      527 cpu[3]+4            fas_intr_svc+0x80
  41   0% 100% 1.00      293 cpu[3]+13           send_mondo+0x18
   1   0% 100% 1.00      266 cpu[3]+12           zsa_rxint+0x400
-----------------------------------------------------------------------
[...]
.fi
.in -2
.sp

.LP
\fBExample 8 \fRDetermining which Subsystem is Causing the System to be Busy
.sp
.in +2
.nf
example# \fBlockstat -s 10 -I sleep 20\fR

Profiling interrupt: 4863 events in 47.375 seconds (103 events/sec)

Count indv cuml rcnt     nsec CPU+PIL          Caller

-----------------------------------------------------------------------
1929   40%  40% 0.00     3215 cpu[0]           usec_delay+0x78
 nsec ------ Time Distribution ------ count   Stack
 4096 |@@@@@@@@@@@@@@@@@@@@@@@@@@@@@  1872    ata_wait+0x90
 8192 |                               27      acersb_get_intr_status+0x34     
16384 |                               29      ata_set_feature+0x124
32768 |                               1       ata_disk_start+0x15c
                                              ata_hba_start+0xbc
                                              ghd_waitq_process_and \e
                                              _mutex_hold+0x70
                                              ghd_waitq_process_and \e
                                              _mutex_exit+0x4
                                              ghd_transport+0x12c
                                              ata_disk_tran_start+0x108
-----------------------------------------------------------------------
[...]
.fi
.in -2
.sp

.SH ATTRIBUTES
.sp
.LP
See \fBattributes\fR(5) for descriptions of the following attributes:
.sp

.sp
.TS
tab(\a) box;
cw(2.75i) |cw(2.75i) 
lw(2.75i) |lw(2.75i) 
.
ATTRIBUTE TYPE\aATTRIBUTE VALUE
_
Availability\aSUNWdtrc
.TE

.SH SEE ALSO
.sp
.LP
\fBdtrace\fR(1M), \fBplockstat\fR(1M), \fBattributes\fR(5), \fBlockstat\fR(7D), \fBmutex\fR(9F), \fBrwlock\fR(9F)
.sp
.LP
\fISolaris Dynamic Tracing Guide\fR
.SH NOTES
.sp
.LP
The profiling support provided by \fBlockstat\fR \fB-I\fR replaces the old (and undocumented) \fB/usr/bin/kgmon\fR and \fB/dev/profile\fR.
.sp
.LP
Tail-call elimination can affect call sites. For example, if \fBfoo()\fR\fB+0x50\fR calls \fBbar()\fR and the last thing \fBbar()\fR does is call \fBmutex_exit()\fR, the compiler can arrange for \fBbar()\fR to
branch to \fBmutex_exit()\fRwith a return address of \fBfoo()\fR\fB+0x58\fR. Thus, the \fBmutex_exit()\fR in \fBbar()\fR will appear as though it occurred at \fBfoo()\fR\fB+0x58\fR.
.sp
.LP
The \fBPC\fR in the stack frame in which an interrupt occurs can be bogus because, between function calls, the compiler is free to use the return address register for local storage.
.sp
.LP
When using the \fB-I\fR and \fB-s\fR options together, the interrupted PC will usually not appear anywhere in the stack since the interrupt handler is entered asynchronously, not by a function call from that \fBPC\fR.
.sp
.LP
The \fBlockstat\fR technology is provided on an as-is basis. The format and content of \fBlockstat\fR output reflect the current Solaris kernel implementation and are therefore subject to change in future releases.