]> CyberLeo.Net >> Repos - FreeBSD/releng/9.2.git/blob - contrib/ntp/ntpd/refclock_local.c
- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.
[FreeBSD/releng/9.2.git] / contrib / ntp / ntpd / refclock_local.c
1
2 /*
3  * refclock_local - local pseudo-clock driver
4  *
5  * wjm 17-aug-1995: add a hook for special treatment of VMS_LOCALUNIT
6  */
7 #ifdef HAVE_CONFIG_H
8 #include <config.h>
9 #endif
10
11 #ifdef REFCLOCK
12
13 #include "ntpd.h"
14 #include "ntp_refclock.h"
15 #include "ntp_stdlib.h"
16
17 #include <stdio.h>
18 #include <ctype.h>
19
20 #ifdef KERNEL_PLL
21 #include "ntp_syscall.h"
22 #endif
23
24 /*
25  * This is a hack to allow a machine to use its own system clock as a
26  * reference clock, i.e., to free-run using no outside clock discipline
27  * source. This is useful if you want to use NTP in an isolated
28  * environment with no radio clock or NIST modem available. Pick a
29  * machine that you figure has a good clock oscillator and configure it
30  * with this driver. Set the clock using the best means available, like
31  * eyeball-and-wristwatch. Then, point all the other machines at this
32  * one or use broadcast (not multicast) mode to distribute time.
33  *
34  * Another application for this driver is if you want to use a
35  * particular server's clock as the clock of last resort when all other
36  * normal synchronization sources have gone away. This is especially
37  * useful if that server has an ovenized oscillator. For this you would
38  * configure this driver at a higher stratum (say 5) to prevent the
39  * server's stratum from falling below that.
40  *
41  * A third application for this driver is when an external discipline
42  * source is available, such as the NIST "lockclock" program, which
43  * synchronizes the local clock via a telephone modem and the NIST
44  * Automated Computer Time Service (ACTS), or the Digital Time
45  * Synchronization Service (DTSS), which runs on DCE machines. In this
46  * case the stratum should be set at zero, indicating a bona fide
47  * stratum-1 source. Exercise some caution with this, since there is no
48  * easy way to telegraph via NTP that something might be wrong in the
49  * discipline source itself. In the case of DTSS, the local clock can
50  * have a rather large jitter, depending on the interval between
51  * corrections and the intrinsic frequency error of the clock
52  * oscillator. In extreme cases, this can cause clients to exceed the
53  * 128-ms slew window and drop off the NTP subnet.
54  *
55  * THis driver includes provisions to telegraph synchronization state
56  * and related variables by means of kernel variables with specially
57  * modified kernels. This is done using the ntp_adjtime() syscall.
58  * In the cases where another protocol or device synchronizes the local
59  * host, the data given to the kernel can be slurped up by this driver
60  * and distributed to clients by ordinary NTP messaging.
61  *
62  * In the default mode the behavior of the clock selection algorithm is
63  * modified when this driver is in use. The algorithm is designed so
64  * that this driver will never be selected unless no other discipline
65  * source is available. This can be overriden with the prefer keyword of
66  * the server configuration command, in which case only this driver will
67  * be selected for synchronization and all other discipline sources will
68  * be ignored. This behavior is intended for use when an external
69  * discipline source controls the system clock.
70  *
71  * Fudge Factors
72  *
73  * The stratum for this driver set at 5 by default, but it can be
74  * changed by the fudge command and/or the ntpdc utility. The reference
75  * ID is 127.0.0.1 by default, but can be changed using the same mechanism.
76  * *NEVER* configure this driver to operate at a stratum which might
77  * possibly disrupt a client with access to a bona fide primary server,
78  * unless the local clock oscillator is reliably disciplined by another
79  * source. *NEVER NEVER* configure a server which might devolve to an
80  * undisciplined local clock to use multicast mode. Always remember that
81  * an improperly configured local clock driver let loose in the Internet
82  * can cause very serious disruption. This is why most of us who care
83  * about good time use cryptographic authentication.
84  *
85  * This driver provides a mechanism to trim the local clock in both time
86  * and frequency, as well as a way to manipulate the leap bits. The
87  * fudge time1 parameter adjusts the time, in seconds, and the fudge
88  * time2 parameter adjusts the frequency, in ppm. The fudge time1
89  * parameter is additive; that is, it adds an increment to the current
90  * time. The fudge time2 parameter directly sets the frequency.
91  */
92 /*
93  * Local interface definitions
94  */
95 #define PRECISION       (-7)    /* about 10 ms precision */
96 #define DESCRIPTION "Undisciplined local clock" /* WRU */
97 #define STRATUM         5       /* default stratum */
98 #define DISPERSION      .01     /* default dispersion (10 ms) */
99
100 /*
101  * Imported from the timer module
102  */
103 extern u_long current_time;
104
105 /*
106  * Imported from ntp_proto
107  */
108 extern s_char sys_precision;
109
110 #ifdef KERNEL_PLL
111 /*
112  * Imported from ntp_loopfilter
113  */
114 extern int pll_control;         /* kernel pll control */
115 extern int kern_enable;         /* kernel pll enabled */
116 extern int ext_enable;          /* external clock enable */
117 #endif /* KERNEL_PLL */
118
119 /*
120  * Function prototypes
121  */
122 static  int local_start P((int, struct peer *));
123 static  void    local_poll      P((int, struct peer *));
124
125 /*
126  * Local variables
127  */
128 static  u_long poll_time;       /* last time polled */
129         
130 /*
131  * Transfer vector
132  */
133 struct  refclock refclock_local = {
134         local_start,            /* start up driver */
135         noentry,                /* shut down driver (not used) */
136         local_poll,             /* transmit poll message */
137         noentry,                /* not used (old lcl_control) */
138         noentry,                /* initialize driver (not used) */
139         noentry,                /* not used (old lcl_buginfo) */
140         NOFLAGS                 /* not used */
141 };
142
143
144 /*
145  * local_start - start up the clock
146  */
147 static int
148 local_start(
149         int unit,
150         struct peer *peer
151         )
152 {
153         struct refclockproc *pp;
154
155         pp = peer->procptr;
156
157         /*
158          * Initialize miscellaneous variables
159          */
160         peer->precision = sys_precision;
161         pp->leap = LEAP_NOTINSYNC;
162         peer->stratum = STRATUM;
163         pp->stratum = STRATUM;
164         pp->clockdesc = DESCRIPTION;
165         memcpy(&pp->refid, "LOCL", 4);
166         poll_time = current_time;
167         return (1);
168 }
169
170
171 /*
172  * local_poll - called by the transmit procedure
173  *
174  * LOCKCLOCK: If the kernel supports the nanokernel or microkernel
175  * system calls, the leap bits are extracted from the kernel. If there
176  * is a kernel error or the kernel leap bits are set to 11, the NTP leap
177  * bits are set to 11 and the stratum is set to infinity. Otherwise, the
178  * NTP leap bits are set to the kernel leap bits and the stratum is set
179  * as fudged. This behavior does not faithfully follow the
180  * specification, but is probably more appropriate in a multiple-server
181  * national laboratory network.
182  */
183 static void
184 local_poll(
185         int unit,
186         struct peer *peer
187         )
188 {
189 #if defined(KERNEL_PLL) && defined(LOCKCLOCK)
190         struct timex ntv;
191 #endif /* KERNEL_PLL LOCKCLOCK */
192         struct refclockproc *pp;
193
194 #if defined(VMS) && defined(VMS_LOCALUNIT)
195         if (unit == VMS_LOCALUNIT) {
196                 extern void vms_local_poll(struct peer *);
197
198                 vms_local_poll(peer);
199                 return;
200         }
201 #endif /* VMS && VMS_LOCALUNIT */
202         pp = peer->procptr;
203         pp->polls++;
204
205         /*
206          * Ramble through the usual filtering and grooming code, which
207          * is essentially a no-op and included mostly for pretty
208          * billboards. We allow a one-time time adjustment using fudge
209          * time1 (s) and a continuous frequency adjustment using fudge
210          * time 2 (ppm).
211          */
212         get_systime(&pp->lastrec);
213         pp->fudgetime1 += pp->fudgetime2 * 1e-6 * (current_time -
214             poll_time);
215         poll_time = current_time;
216         refclock_process_offset(pp, pp->lastrec, pp->lastrec,
217             pp->fudgetime1);
218
219         /*
220          * If another process is disciplining the system clock, we set
221          * the leap bits and quality indicators from the kernel.
222          */
223 #if defined(KERNEL_PLL) && defined(LOCKCLOCK)
224         memset(&ntv,  0, sizeof ntv);
225         switch (ntp_adjtime(&ntv)) {
226         case TIME_OK:
227                 pp->leap = LEAP_NOWARNING;
228                 peer->stratum = pp->stratum;
229                 break;
230
231         case TIME_INS:
232                 pp->leap = LEAP_ADDSECOND;
233                 peer->stratum = pp->stratum;
234                 break;
235
236         case TIME_DEL:
237                 pp->leap = LEAP_DELSECOND;
238                 peer->stratum = pp->stratum;
239                 break;
240
241         default:
242                 pp->leap = LEAP_NOTINSYNC;
243                 peer->stratum = STRATUM_UNSPEC;
244         }
245         pp->disp = 0;
246         pp->jitter = 0;
247 #else /* KERNEL_PLL LOCKCLOCK */
248         pp->leap = LEAP_NOWARNING;
249         pp->disp = DISPERSION;
250         pp->jitter = 0;
251 #endif /* KERNEL_PLL LOCKCLOCK */
252         pp->lastref = pp->lastrec;
253         refclock_receive(peer);
254         pp->fudgetime1 = 0;
255 }
256 #else
257 int refclock_local_bs;
258 #endif /* REFCLOCK */