contrib/openpam/doc/man/Makefile.in

   1 # Makefile.in generated by automake 1.11.1 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
   5 # 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
   6 # Inc.
   7 # This Makefile.in is free software; the Free Software Foundation
   8 # gives unlimited permission to copy and/or distribute it,
   9 # with or without modifications, as long as this notice is preserved.
  10
  11 # This program is distributed in the hope that it will be useful,
  12 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  13 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  14 # PARTICULAR PURPOSE.
  15
  16 @SET_MAKE@
  17
  18 # $Id: Makefile.am 594 2012-04-14 14:18:41Z des $
  19 pkgdatadir = $(datadir)/@PACKAGE@
  20 pkgincludedir = $(includedir)/@PACKAGE@
  21 pkglibdir = $(libdir)/@PACKAGE@
  22 pkglibexecdir = $(libexecdir)/@PACKAGE@
  23 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  24 install_sh_DATA = $(install_sh) -c -m 644
  25 install_sh_PROGRAM = $(install_sh) -c
  26 install_sh_SCRIPT = $(install_sh) -c
  27 INSTALL_HEADER = $(INSTALL_DATA)
  28 transform = $(program_transform_name)
  29 NORMAL_INSTALL = :
  30 PRE_INSTALL = :
  31 POST_INSTALL = :
  32 NORMAL_UNINSTALL = :
  33 PRE_UNINSTALL = :
  34 POST_UNINSTALL = :
  35 build_triplet = @build@
  36 host_triplet = @host@
  37 subdir = doc/man
  38 DIST_COMMON = $(dist_man3_MANS) $(dist_man5_MANS) \
  39         $(srcdir)/Makefile.am $(srcdir)/Makefile.in
  40 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  41 am__aclocal_m4_deps = $(top_srcdir)/configure.ac
  42 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  43         $(ACLOCAL_M4)
  44 mkinstalldirs = $(install_sh) -d
  45 CONFIG_HEADER = $(top_builddir)/config.h
  46 CONFIG_CLEAN_FILES =
  47 CONFIG_CLEAN_VPATH_FILES =
  48 SOURCES =
  49 DIST_SOURCES =
  50 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
  51 am__vpath_adj = case $$p in \
  52     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
  53     *) f=$$p;; \
  54   esac;
  55 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
  56 am__install_max = 40
  57 am__nobase_strip_setup = \
  58   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
  59 am__nobase_strip = \
  60   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
  61 am__nobase_list = $(am__nobase_strip_setup); \
  62   for p in $$list; do echo "$$p $$p"; done | \
  63   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
  64   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
  65     if (++n[$$2] == $(am__install_max)) \
  66       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
  67     END { for (dir in files) print dir, files[dir] }'
  68 am__base_list = \
  69   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
  70   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
  71 man3dir = $(mandir)/man3
  72 am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"
  73 man5dir = $(mandir)/man5
  74 NROFF = nroff
  75 MANS = $(dist_man3_MANS) $(dist_man5_MANS)
  76 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
  77 VPATH = $(LIBSRCDIR) $(srcdir)
  78 ACLOCAL = @ACLOCAL@
  79 AMTAR = @AMTAR@
  80 AR = @AR@
  81 AUTOCONF = @AUTOCONF@
  82 AUTOHEADER = @AUTOHEADER@
  83 AUTOMAKE = @AUTOMAKE@
  84 AWK = @AWK@
  85 CC = @CC@
  86 CCDEPMODE = @CCDEPMODE@
  87 CFLAGS = @CFLAGS@
  88 CPP = @CPP@
  89 CPPFLAGS = @CPPFLAGS@
  90 CRYPT_LIBS = @CRYPT_LIBS@
  91 CYGPATH_W = @CYGPATH_W@
  92 DEFS = @DEFS@
  93 DEPDIR = @DEPDIR@
  94 DLLTOOL = @DLLTOOL@
  95 DL_LIBS = @DL_LIBS@
  96 DSYMUTIL = @DSYMUTIL@
  97 DUMPBIN = @DUMPBIN@
  98 ECHO_C = @ECHO_C@
  99 ECHO_N = @ECHO_N@
 100 ECHO_T = @ECHO_T@
 101 EGREP = @EGREP@
 102 EXEEXT = @EXEEXT@
 103 FGREP = @FGREP@
 104 GREP = @GREP@
 105 INSTALL = @INSTALL@
 106 INSTALL_DATA = @INSTALL_DATA@
 107 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 108 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 109 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 110 LD = @LD@
 111 LDFLAGS = @LDFLAGS@
 112 LIBOBJS = @LIBOBJS@
 113 LIBS = @LIBS@
 114 LIBTOOL = @LIBTOOL@
 115 LIB_MAJ = @LIB_MAJ@
 116 LIPO = @LIPO@
 117 LN_S = @LN_S@
 118 LTLIBOBJS = @LTLIBOBJS@
 119 MAKEINFO = @MAKEINFO@
 120 MANIFEST_TOOL = @MANIFEST_TOOL@
 121 MKDIR_P = @MKDIR_P@
 122 NM = @NM@
 123 NMEDIT = @NMEDIT@
 124 OBJDUMP = @OBJDUMP@
 125 OBJEXT = @OBJEXT@
 126 OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
 127 OTOOL = @OTOOL@
 128 OTOOL64 = @OTOOL64@
 129 PACKAGE = @PACKAGE@
 130 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 131 PACKAGE_NAME = @PACKAGE_NAME@
 132 PACKAGE_STRING = @PACKAGE_STRING@
 133 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 134 PACKAGE_URL = @PACKAGE_URL@
 135 PACKAGE_VERSION = @PACKAGE_VERSION@
 136 PATH_SEPARATOR = @PATH_SEPARATOR@
 137 RANLIB = @RANLIB@
 138 SED = @SED@
 139 SET_MAKE = @SET_MAKE@
 140 SHELL = @SHELL@
 141 STRIP = @STRIP@
 142 VERSION = @VERSION@
 143 abs_builddir = @abs_builddir@
 144 abs_srcdir = @abs_srcdir@
 145 abs_top_builddir = @abs_top_builddir@
 146 abs_top_srcdir = @abs_top_srcdir@
 147 ac_ct_AR = @ac_ct_AR@
 148 ac_ct_CC = @ac_ct_CC@
 149 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 150 am__include = @am__include@
 151 am__leading_dot = @am__leading_dot@
 152 am__quote = @am__quote@
 153 am__tar = @am__tar@
 154 am__untar = @am__untar@
 155 bindir = @bindir@
 156 build = @build@
 157 build_alias = @build_alias@
 158 build_cpu = @build_cpu@
 159 build_os = @build_os@
 160 build_vendor = @build_vendor@
 161 builddir = @builddir@
 162 datadir = @datadir@
 163 datarootdir = @datarootdir@
 164 docdir = @docdir@
 165 dvidir = @dvidir@
 166 exec_prefix = @exec_prefix@
 167 host = @host@
 168 host_alias = @host_alias@
 169 host_cpu = @host_cpu@
 170 host_os = @host_os@
 171 host_vendor = @host_vendor@
 172 htmldir = @htmldir@
 173 includedir = @includedir@
 174 infodir = @infodir@
 175 install_sh = @install_sh@
 176 libdir = @libdir@
 177 libexecdir = @libexecdir@
 178 localedir = @localedir@
 179 localstatedir = @localstatedir@
 180 mandir = @mandir@
 181 mkdir_p = @mkdir_p@
 182 oldincludedir = @oldincludedir@
 183 pdfdir = @pdfdir@
 184 prefix = @prefix@
 185 program_transform_name = @program_transform_name@
 186 psdir = @psdir@
 187 sbindir = @sbindir@
 188 sharedstatedir = @sharedstatedir@
 189 srcdir = @srcdir@
 190 sysconfdir = @sysconfdir@
 191 target_alias = @target_alias@
 192 top_build_prefix = @top_build_prefix@
 193 top_builddir = @top_builddir@
 194 top_srcdir = @top_srcdir@
 195 NULL =
 196
 197 # Standard PAM API
 198 PMAN = \
 199         pam_acct_mgmt.3 \
 200         pam_authenticate.3 \
 201         pam_chauthtok.3 \
 202         pam_close_session.3 \
 203         pam_end.3 \
 204         pam_get_data.3 \
 205         pam_get_item.3 \
 206         pam_get_user.3 \
 207         pam_getenv.3 \
 208         pam_getenvlist.3 \
 209         pam_open_session.3 \
 210         pam_putenv.3 \
 211         pam_set_data.3 \
 212         pam_set_item.3 \
 213         pam_setcred.3 \
 214         pam_start.3 \
 215         pam_strerror.3 \
 216         $(NULL)
 217
 218
 219 # Standard module API
 220 MMAN = \
 221         pam_sm_acct_mgmt.3 \
 222         pam_sm_authenticate.3 \
 223         pam_sm_chauthtok.3 \
 224         pam_sm_close_session.3 \
 225         pam_sm_open_session.3 \
 226         pam_sm_setcred.3 \
 227         $(NULL)
 228
 229
 230 # OpenPAM extensions
 231 OMAN = \
 232         openpam_borrow_cred.3 \
 233         openpam_free_data.3 \
 234         openpam_free_envlist.3 \
 235         openpam_get_feature.3 \
 236         openpam_get_option.3 \
 237         openpam_log.3 \
 238         openpam_nullconv.3 \
 239         openpam_readline.3 \
 240         openpam_readlinev.3 \
 241         openpam_readword.3 \
 242         openpam_restore_cred.3 \
 243         openpam_set_feature.3 \
 244         openpam_set_option.3 \
 245         openpam_straddch.3 \
 246         openpam_subst.3 \
 247         openpam_ttyconv.3 \
 248         pam_error.3 \
 249         pam_get_authtok.3 \
 250         pam_info.3 \
 251         pam_prompt.3 \
 252         pam_setenv.3 \
 253         pam_verror.3 \
 254         pam_vinfo.3 \
 255         pam_vprompt.3 \
 256         $(NULL)
 257
 258 EXTRA_DIST = openpam.man pam.man
 259 ALLCMAN = $(PMAN) $(MMAN) $(OMAN)
 260 dist_man3_MANS = $(ALLCMAN) openpam.3 pam.3 pam_conv.3
 261 dist_man5_MANS = pam.conf.5
 262 CLEANFILES = $(ALLCMAN) openpam.3 pam.3
 263 GENDOC = $(top_srcdir)/misc/gendoc.pl
 264 LIBSRCDIR = $(top_srcdir)/lib
 265 SUFFIXES = .3
 266 all: all-am
 267
 268 .SUFFIXES:
 269 .SUFFIXES: .3 .c
 270 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 271         @for dep in $?; do \
 272           case '$(am__configure_deps)' in \
 273             *$$dep*) \
 274               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 275                 && { if test -f $@; then exit 0; else break; fi; }; \
 276               exit 1;; \
 277           esac; \
 278         done; \
 279         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/man/Makefile'; \
 280         $(am__cd) $(top_srcdir) && \
 281           $(AUTOMAKE) --foreign doc/man/Makefile
 282 .PRECIOUS: Makefile
 283 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 284         @case '$?' in \
 285           *config.status*) \
 286             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 287           *) \
 288             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 289             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 290         esac;
 291
 292 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 293         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 294
 295 $(top_srcdir)/configure:  $(am__configure_deps)
 296         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 297 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 298         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 299 $(am__aclocal_m4_deps):
 300
 301 mostlyclean-libtool:
 302         -rm -f *.lo
 303
 304 clean-libtool:
 305         -rm -rf .libs _libs
 306 install-man3: $(dist_man3_MANS)
 307         @$(NORMAL_INSTALL)
 308         test -z "$(man3dir)" || $(MKDIR_P) "$(DESTDIR)$(man3dir)"
 309         @list='$(dist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \
 310         { for i in $$list; do echo "$$i"; done; \
 311         } | while read p; do \
 312           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 313           echo "$$d$$p"; echo "$$p"; \
 314         done | \
 315         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 316               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 317         sed 'N;N;s,\n, ,g' | { \
 318         list=; while read file base inst; do \
 319           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 320             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
 321             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
 322           fi; \
 323         done; \
 324         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 325         while read files; do \
 326           test -z "$$files" || { \
 327             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
 328             $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
 329         done; }
 330
 331 uninstall-man3:
 332         @$(NORMAL_UNINSTALL)
 333         @list='$(dist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \
 334         files=`{ for i in $$list; do echo "$$i"; done; \
 335         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 336               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 337         test -z "$$files" || { \
 338           echo " ( cd '$(DESTDIR)$(man3dir)' && rm -f" $$files ")"; \
 339           cd "$(DESTDIR)$(man3dir)" && rm -f $$files; }
 340 install-man5: $(dist_man5_MANS)
 341         @$(NORMAL_INSTALL)
 342         test -z "$(man5dir)" || $(MKDIR_P) "$(DESTDIR)$(man5dir)"
 343         @list='$(dist_man5_MANS)'; test -n "$(man5dir)" || exit 0; \
 344         { for i in $$list; do echo "$$i"; done; \
 345         } | while read p; do \
 346           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 347           echo "$$d$$p"; echo "$$p"; \
 348         done | \
 349         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
 350               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 351         sed 'N;N;s,\n, ,g' | { \
 352         list=; while read file base inst; do \
 353           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 354             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
 355             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
 356           fi; \
 357         done; \
 358         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 359         while read files; do \
 360           test -z "$$files" || { \
 361             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
 362             $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
 363         done; }
 364
 365 uninstall-man5:
 366         @$(NORMAL_UNINSTALL)
 367         @list='$(dist_man5_MANS)'; test -n "$(man5dir)" || exit 0; \
 368         files=`{ for i in $$list; do echo "$$i"; done; \
 369         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
 370               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 371         test -z "$$files" || { \
 372           echo " ( cd '$(DESTDIR)$(man5dir)' && rm -f" $$files ")"; \
 373           cd "$(DESTDIR)$(man5dir)" && rm -f $$files; }
 374 tags: TAGS
 375 TAGS:
 376
 377 ctags: CTAGS
 378 CTAGS:
 379
 380
 381 distdir: $(DISTFILES)
 382         @list='$(MANS)'; if test -n "$$list"; then \
 383           list=`for p in $$list; do \
 384             if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 385             if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
 386           if test -n "$$list" && \
 387             grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
 388             echo "error: found man pages containing the \`missing help2man' replacement text:" >&2; \
 389             grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
 390             echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
 391             echo "       typically \`make maintainer-clean' will remove them" >&2; \
 392             exit 1; \
 393           else :; fi; \
 394         else :; fi
 395         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 396         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 397         list='$(DISTFILES)'; \
 398           dist_files=`for file in $$list; do echo $$file; done | \
 399           sed -e "s|^$$srcdirstrip/||;t" \
 400               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 401         case $$dist_files in \
 402           */*) $(MKDIR_P) `echo "$$dist_files" | \
 403                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 404                            sort -u` ;; \
 405         esac; \
 406         for file in $$dist_files; do \
 407           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 408           if test -d $$d/$$file; then \
 409             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 410             if test -d "$(distdir)/$$file"; then \
 411               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 412             fi; \
 413             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 414               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 415               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 416             fi; \
 417             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 418           else \
 419             test -f "$(distdir)/$$file" \
 420             || cp -p $$d/$$file "$(distdir)/$$file" \
 421             || exit 1; \
 422           fi; \
 423         done
 424 check-am: all-am
 425 check: check-am
 426 all-am: Makefile $(MANS)
 427 installdirs:
 428         for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
 429           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 430         done
 431 install: install-am
 432 install-exec: install-exec-am
 433 install-data: install-data-am
 434 uninstall: uninstall-am
 435
 436 install-am: all-am
 437         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 438
 439 installcheck: installcheck-am
 440 install-strip:
 441         $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 442           install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 443           `test -z '$(STRIP)' || \
 444             echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
 445 mostlyclean-generic:
 446
 447 clean-generic:
 448         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 449
 450 distclean-generic:
 451         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 452         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 453
 454 maintainer-clean-generic:
 455         @echo "This command is intended for maintainers to use"
 456         @echo "it deletes files that may require special tools to rebuild."
 457 clean: clean-am
 458
 459 clean-am: clean-generic clean-libtool mostlyclean-am
 460
 461 distclean: distclean-am
 462         -rm -f Makefile
 463 distclean-am: clean-am distclean-generic
 464
 465 dvi: dvi-am
 466
 467 dvi-am:
 468
 469 html: html-am
 470
 471 html-am:
 472
 473 info: info-am
 474
 475 info-am:
 476
 477 install-data-am: install-man
 478
 479 install-dvi: install-dvi-am
 480
 481 install-dvi-am:
 482
 483 install-exec-am:
 484
 485 install-html: install-html-am
 486
 487 install-html-am:
 488
 489 install-info: install-info-am
 490
 491 install-info-am:
 492
 493 install-man: install-man3 install-man5
 494
 495 install-pdf: install-pdf-am
 496
 497 install-pdf-am:
 498
 499 install-ps: install-ps-am
 500
 501 install-ps-am:
 502
 503 installcheck-am:
 504
 505 maintainer-clean: maintainer-clean-am
 506         -rm -f Makefile
 507 maintainer-clean-am: distclean-am maintainer-clean-generic
 508
 509 mostlyclean: mostlyclean-am
 510
 511 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 512
 513 pdf: pdf-am
 514
 515 pdf-am:
 516
 517 ps: ps-am
 518
 519 ps-am:
 520
 521 uninstall-am: uninstall-man
 522
 523 uninstall-man: uninstall-man3 uninstall-man5
 524
 525 .MAKE: install-am install-strip
 526
 527 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 528         distclean distclean-generic distclean-libtool distdir dvi \
 529         dvi-am html html-am info info-am install install-am \
 530         install-data install-data-am install-dvi install-dvi-am \
 531         install-exec install-exec-am install-html install-html-am \
 532         install-info install-info-am install-man install-man3 \
 533         install-man5 install-pdf install-pdf-am install-ps \
 534         install-ps-am install-strip installcheck installcheck-am \
 535         installdirs maintainer-clean maintainer-clean-generic \
 536         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 537         ps ps-am uninstall uninstall-am uninstall-man uninstall-man3 \
 538         uninstall-man5
 539
 540
 541 .c.3: $(GENDOC)
 542         perl -w $(GENDOC) $<
 543
 544 openpam.3: $(OMAN) $(GENDOC) $(srcdir)/openpam.man
 545         perl -w $(GENDOC) -o $(abs_srcdir)/$(OMAN) <$(srcdir)/openpam.man
 546
 547 pam.3: $(PMAN) $(GENDOC) $(srcdir)/pam.man
 548         perl -w $(GENDOC) -p $(abs_srcdir)/$(PMAN) <$(srcdir)/pam.man
 549
 550 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 551 # Otherwise a system limit (for SysV at least) may be exceeded.
 552 .NOEXPORT: