3 * Copyright (c) 2000 by Matthew Jacob
6 * Redistribution and use in source and binary forms, with or without
7 * modification, are permitted provided that the following conditions
9 * 1. Redistributions of source code must retain the above copyright
10 * notice, this list of conditions, and the following disclaimer,
11 * without modification, immediately at the beginning of the file.
12 * 2. The name of the author may not be used to endorse or promote products
13 * derived from this software without specific prior written permission.
15 * Alternatively, this software may be distributed under the terms of the
16 * the GNU Public License ("GPL").
18 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
19 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
22 * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
23 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
24 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
25 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
26 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
27 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
40 #include <sys/ioctl.h>
41 #include <cam/scsi/scsi_all.h>
42 #include <cam/scsi/scsi_enc.h>
49 static char rbuf[132];
52 case ELMTYP_UNSPECIFIED:
53 sprintf(rbuf, "Unspecified");
56 sprintf(rbuf, "Device Slot");
59 sprintf(rbuf, "Power Supply");
62 sprintf(rbuf, "Cooling");
65 sprintf(rbuf, "Temperature Sensors");
68 sprintf(rbuf, "Door Lock");
71 sprintf(rbuf, "Audible alarm");
74 sprintf(rbuf, "Enclosure Services Controller Electronics");
77 sprintf(rbuf, "SCC Controller Electronics");
80 sprintf(rbuf, "Nonvolatile Cache");
82 case ELMTYP_INV_OP_REASON:
83 sprintf(rbuf, "Invalid Operation Reason");
86 sprintf(rbuf, "Uninterruptible Power Supply");
89 sprintf(rbuf, "Display");
92 sprintf(rbuf, "Key Pad Entry");
94 case ELMTYP_ENCLOSURE:
95 sprintf(rbuf, "Enclosure");
98 sprintf(rbuf, "SCSI Port/Transceiver");
100 case ELMTYP_LANGUAGE:
101 sprintf(rbuf, "Language");
104 sprintf(rbuf, "Communication Port");
107 sprintf(rbuf, "Voltage Sensor");
110 sprintf(rbuf, "Current Sensor");
112 case ELMTYP_SCSI_TGT:
113 sprintf(rbuf, "SCSI Target Port");
115 case ELMTYP_SCSI_INI:
116 sprintf(rbuf, "SCSI Initiator Port");
119 sprintf(rbuf, "Simple Subenclosure");
121 case ELMTYP_ARRAY_DEV:
122 sprintf(rbuf, "Array Device Slot");
125 sprintf(rbuf, "SAS Expander");
127 case ELMTYP_SAS_CONN:
128 sprintf(rbuf, "SAS Connector");
131 (void) sprintf(rbuf, "<Type 0x%x>", type);
138 scode2ascii(u_char code)
140 static char rbuf[32];
141 switch (code & 0xf) {
142 case SES_OBJSTAT_UNSUPPORTED:
143 sprintf(rbuf, "Unsupported");
148 case SES_OBJSTAT_CRIT:
149 sprintf(rbuf, "Critical");
151 case SES_OBJSTAT_NONCRIT:
152 sprintf(rbuf, "Noncritical");
154 case SES_OBJSTAT_UNRECOV:
155 sprintf(rbuf, "Unrecoverable");
157 case SES_OBJSTAT_NOTINSTALLED:
158 sprintf(rbuf, "Not Installed");
160 case SES_OBJSTAT_UNKNOWN:
161 sprintf(rbuf, "Unknown");
163 case SES_OBJSTAT_NOTAVAIL:
164 sprintf(rbuf, "Not Available");
166 case SES_OBJSTAT_NOACCESS:
167 sprintf(rbuf, "No Access Allowed");
170 sprintf(rbuf, "<Status 0x%x>", code & 0xf);
178 stat2ascii(int eletype __unused, u_char *cstat)
180 static char ebuf[256], *scode;
182 scode = scode2ascii(cstat[0]);
183 sprintf(ebuf, "status: %s%s%s%s (0x%02x 0x%02x 0x%02x 0x%02x)",
185 (cstat[0] & 0x40) ? ", Prd.Fail" : "",
186 (cstat[0] & 0x20) ? ", Disabled" : "",
187 (cstat[0] & 0x10) ? ", Swapped" : "",
188 cstat[0], cstat[1], cstat[2], cstat[3]);