1 /******************************************************************************
3 * Name: actbl.h - Basic ACPI Table Definitions
5 *****************************************************************************/
8 * Copyright (C) 2000 - 2011, Intel Corp.
11 * Redistribution and use in source and binary forms, with or without
12 * modification, are permitted provided that the following conditions
14 * 1. Redistributions of source code must retain the above copyright
15 * notice, this list of conditions, and the following disclaimer,
16 * without modification.
17 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
18 * substantially similar to the "NO WARRANTY" disclaimer below
19 * ("Disclaimer") and any redistribution must be conditioned upon
20 * including a substantially similar Disclaimer requirement for further
21 * binary redistribution.
22 * 3. Neither the names of the above-listed copyright holders nor the names
23 * of any contributors may be used to endorse or promote products derived
24 * from this software without specific prior written permission.
26 * Alternatively, this software may be distributed under the terms of the
27 * GNU General Public License ("GPL") version 2 as published by the Free
28 * Software Foundation.
31 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
32 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
33 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
34 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
35 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
36 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
37 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
38 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
39 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
40 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
41 * POSSIBILITY OF SUCH DAMAGES.
48 /*******************************************************************************
50 * Fundamental ACPI tables
52 * This file contains definitions for the ACPI tables that are directly consumed
53 * by ACPICA. All other tables are consumed by the OS-dependent ACPI-related
54 * device drivers and other OS support code.
56 * The RSDP and FACS do not use the common ACPI table header. All other ACPI
57 * tables use the header.
59 ******************************************************************************/
63 * Values for description table header signatures for tables defined in this
64 * file. Useful because they make it more difficult to inadvertently type in
65 * the wrong signature.
67 #define ACPI_SIG_DSDT "DSDT" /* Differentiated System Description Table */
68 #define ACPI_SIG_FADT "FACP" /* Fixed ACPI Description Table */
69 #define ACPI_SIG_FACS "FACS" /* Firmware ACPI Control Structure */
70 #define ACPI_SIG_PSDT "PSDT" /* Persistent System Description Table */
71 #define ACPI_SIG_RSDP "RSD PTR " /* Root System Description Pointer */
72 #define ACPI_SIG_RSDT "RSDT" /* Root System Description Table */
73 #define ACPI_SIG_XSDT "XSDT" /* Extended System Description Table */
74 #define ACPI_SIG_SSDT "SSDT" /* Secondary System Description Table */
75 #define ACPI_RSDP_NAME "RSDP" /* Short name for RSDP, not signature */
79 * All tables and structures must be byte-packed to match the ACPI
80 * specification, since the tables are provided by the system BIOS
85 * Note about bitfields: The UINT8 type is used for bitfields in ACPI tables.
86 * This is the only type that is even remotely portable. Anything else is not
87 * portable, so do not use any other bitfield types.
91 /*******************************************************************************
93 * Master ACPI Table Header. This common header is used by all ACPI tables
94 * except the RSDP and FACS.
96 ******************************************************************************/
98 typedef struct acpi_table_header
100 char Signature[ACPI_NAME_SIZE]; /* ASCII table signature */
101 UINT32 Length; /* Length of table in bytes, including this header */
102 UINT8 Revision; /* ACPI Specification minor version # */
103 UINT8 Checksum; /* To make sum of entire table == 0 */
104 char OemId[ACPI_OEM_ID_SIZE]; /* ASCII OEM identification */
105 char OemTableId[ACPI_OEM_TABLE_ID_SIZE]; /* ASCII OEM table identification */
106 UINT32 OemRevision; /* OEM revision number */
107 char AslCompilerId[ACPI_NAME_SIZE]; /* ASCII ASL compiler vendor ID */
108 UINT32 AslCompilerRevision; /* ASL compiler version */
113 /*******************************************************************************
115 * GAS - Generic Address Structure (ACPI 2.0+)
117 * Note: Since this structure is used in the ACPI tables, it is byte aligned.
118 * If misaliged access is not supported by the hardware, accesses to the
119 * 64-bit Address field must be performed with care.
121 ******************************************************************************/
123 typedef struct acpi_generic_address
125 UINT8 SpaceId; /* Address space where struct or register exists */
126 UINT8 BitWidth; /* Size in bits of given register */
127 UINT8 BitOffset; /* Bit offset within the register */
128 UINT8 AccessWidth; /* Minimum Access size (ACPI 3.0) */
129 UINT64 Address; /* 64-bit address of struct or register */
131 } ACPI_GENERIC_ADDRESS;
134 /*******************************************************************************
136 * RSDP - Root System Description Pointer (Signature is "RSD PTR ")
139 ******************************************************************************/
141 typedef struct acpi_table_rsdp
143 char Signature[8]; /* ACPI signature, contains "RSD PTR " */
144 UINT8 Checksum; /* ACPI 1.0 checksum */
145 char OemId[ACPI_OEM_ID_SIZE]; /* OEM identification */
146 UINT8 Revision; /* Must be (0) for ACPI 1.0 or (2) for ACPI 2.0+ */
147 UINT32 RsdtPhysicalAddress; /* 32-bit physical address of the RSDT */
148 UINT32 Length; /* Table length in bytes, including header (ACPI 2.0+) */
149 UINT64 XsdtPhysicalAddress; /* 64-bit physical address of the XSDT (ACPI 2.0+) */
150 UINT8 ExtendedChecksum; /* Checksum of entire table (ACPI 2.0+) */
151 UINT8 Reserved[3]; /* Reserved, must be zero */
155 /* Standalone struct for the ACPI 1.0 RSDP */
157 typedef struct acpi_rsdp_common
161 char OemId[ACPI_OEM_ID_SIZE];
163 UINT32 RsdtPhysicalAddress;
167 /* Standalone struct for the extended part of the RSDP (ACPI 2.0+) */
169 typedef struct acpi_rsdp_extension
172 UINT64 XsdtPhysicalAddress;
173 UINT8 ExtendedChecksum;
176 } ACPI_RSDP_EXTENSION;
179 /*******************************************************************************
181 * RSDT/XSDT - Root System Description Tables
184 ******************************************************************************/
186 typedef struct acpi_table_rsdt
188 ACPI_TABLE_HEADER Header; /* Common ACPI table header */
189 UINT32 TableOffsetEntry[1]; /* Array of pointers to ACPI tables */
193 typedef struct acpi_table_xsdt
195 ACPI_TABLE_HEADER Header; /* Common ACPI table header */
196 UINT64 TableOffsetEntry[1]; /* Array of pointers to ACPI tables */
201 /*******************************************************************************
203 * FACS - Firmware ACPI Control Structure (FACS)
205 ******************************************************************************/
207 typedef struct acpi_table_facs
209 char Signature[4]; /* ASCII table signature */
210 UINT32 Length; /* Length of structure, in bytes */
211 UINT32 HardwareSignature; /* Hardware configuration signature */
212 UINT32 FirmwareWakingVector; /* 32-bit physical address of the Firmware Waking Vector */
213 UINT32 GlobalLock; /* Global Lock for shared hardware resources */
215 UINT64 XFirmwareWakingVector; /* 64-bit version of the Firmware Waking Vector (ACPI 2.0+) */
216 UINT8 Version; /* Version of this table (ACPI 2.0+) */
217 UINT8 Reserved[3]; /* Reserved, must be zero */
218 UINT32 OspmFlags; /* Flags to be set by OSPM (ACPI 4.0) */
219 UINT8 Reserved1[24]; /* Reserved, must be zero */
223 /* Masks for GlobalLock flag field above */
225 #define ACPI_GLOCK_PENDING (1) /* 00: Pending global lock ownership */
226 #define ACPI_GLOCK_OWNED (1<<1) /* 01: Global lock is owned */
228 /* Masks for Flags field above */
230 #define ACPI_FACS_S4_BIOS_PRESENT (1) /* 00: S4BIOS support is present */
231 #define ACPI_FACS_64BIT_WAKE (1<<1) /* 01: 64-bit wake vector supported (ACPI 4.0) */
233 /* Masks for OspmFlags field above */
235 #define ACPI_FACS_64BIT_ENVIRONMENT (1) /* 00: 64-bit wake environment is required (ACPI 4.0) */
238 /*******************************************************************************
240 * FADT - Fixed ACPI Description Table (Signature "FACP")
243 ******************************************************************************/
245 /* Fields common to all versions of the FADT */
247 typedef struct acpi_table_fadt
249 ACPI_TABLE_HEADER Header; /* Common ACPI table header */
250 UINT32 Facs; /* 32-bit physical address of FACS */
251 UINT32 Dsdt; /* 32-bit physical address of DSDT */
252 UINT8 Model; /* System Interrupt Model (ACPI 1.0) - not used in ACPI 2.0+ */
253 UINT8 PreferredProfile; /* Conveys preferred power management profile to OSPM. */
254 UINT16 SciInterrupt; /* System vector of SCI interrupt */
255 UINT32 SmiCommand; /* 32-bit Port address of SMI command port */
256 UINT8 AcpiEnable; /* Value to write to smi_cmd to enable ACPI */
257 UINT8 AcpiDisable; /* Value to write to smi_cmd to disable ACPI */
258 UINT8 S4BiosRequest; /* Value to write to SMI CMD to enter S4BIOS state */
259 UINT8 PstateControl; /* Processor performance state control*/
260 UINT32 Pm1aEventBlock; /* 32-bit Port address of Power Mgt 1a Event Reg Blk */
261 UINT32 Pm1bEventBlock; /* 32-bit Port address of Power Mgt 1b Event Reg Blk */
262 UINT32 Pm1aControlBlock; /* 32-bit Port address of Power Mgt 1a Control Reg Blk */
263 UINT32 Pm1bControlBlock; /* 32-bit Port address of Power Mgt 1b Control Reg Blk */
264 UINT32 Pm2ControlBlock; /* 32-bit Port address of Power Mgt 2 Control Reg Blk */
265 UINT32 PmTimerBlock; /* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
266 UINT32 Gpe0Block; /* 32-bit Port address of General Purpose Event 0 Reg Blk */
267 UINT32 Gpe1Block; /* 32-bit Port address of General Purpose Event 1 Reg Blk */
268 UINT8 Pm1EventLength; /* Byte Length of ports at Pm1xEventBlock */
269 UINT8 Pm1ControlLength; /* Byte Length of ports at Pm1xControlBlock */
270 UINT8 Pm2ControlLength; /* Byte Length of ports at Pm2ControlBlock */
271 UINT8 PmTimerLength; /* Byte Length of ports at PmTimerBlock */
272 UINT8 Gpe0BlockLength; /* Byte Length of ports at Gpe0Block */
273 UINT8 Gpe1BlockLength; /* Byte Length of ports at Gpe1Block */
274 UINT8 Gpe1Base; /* Offset in GPE number space where GPE1 events start */
275 UINT8 CstControl; /* Support for the _CST object and C States change notification */
276 UINT16 C2Latency; /* Worst case HW latency to enter/exit C2 state */
277 UINT16 C3Latency; /* Worst case HW latency to enter/exit C3 state */
278 UINT16 FlushSize; /* Processor's memory cache line width, in bytes */
279 UINT16 FlushStride; /* Number of flush strides that need to be read */
280 UINT8 DutyOffset; /* Processor duty cycle index in processor's P_CNT reg */
281 UINT8 DutyWidth; /* Processor duty cycle value bit width in P_CNT register */
282 UINT8 DayAlarm; /* Index to day-of-month alarm in RTC CMOS RAM */
283 UINT8 MonthAlarm; /* Index to month-of-year alarm in RTC CMOS RAM */
284 UINT8 Century; /* Index to century in RTC CMOS RAM */
285 UINT16 BootFlags; /* IA-PC Boot Architecture Flags (see below for individual flags) */
286 UINT8 Reserved; /* Reserved, must be zero */
287 UINT32 Flags; /* Miscellaneous flag bits (see below for individual flags) */
288 ACPI_GENERIC_ADDRESS ResetRegister; /* 64-bit address of the Reset register */
289 UINT8 ResetValue; /* Value to write to the ResetRegister port to reset the system */
290 UINT8 Reserved4[3]; /* Reserved, must be zero */
291 UINT64 XFacs; /* 64-bit physical address of FACS */
292 UINT64 XDsdt; /* 64-bit physical address of DSDT */
293 ACPI_GENERIC_ADDRESS XPm1aEventBlock; /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
294 ACPI_GENERIC_ADDRESS XPm1bEventBlock; /* 64-bit Extended Power Mgt 1b Event Reg Blk address */
295 ACPI_GENERIC_ADDRESS XPm1aControlBlock; /* 64-bit Extended Power Mgt 1a Control Reg Blk address */
296 ACPI_GENERIC_ADDRESS XPm1bControlBlock; /* 64-bit Extended Power Mgt 1b Control Reg Blk address */
297 ACPI_GENERIC_ADDRESS XPm2ControlBlock; /* 64-bit Extended Power Mgt 2 Control Reg Blk address */
298 ACPI_GENERIC_ADDRESS XPmTimerBlock; /* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
299 ACPI_GENERIC_ADDRESS XGpe0Block; /* 64-bit Extended General Purpose Event 0 Reg Blk address */
300 ACPI_GENERIC_ADDRESS XGpe1Block; /* 64-bit Extended General Purpose Event 1 Reg Blk address */
305 /* Masks for FADT Boot Architecture Flags (BootFlags) */
307 #define ACPI_FADT_LEGACY_DEVICES (1) /* 00: [V2] System has LPC or ISA bus devices */
308 #define ACPI_FADT_8042 (1<<1) /* 01: [V3] System has an 8042 controller on port 60/64 */
309 #define ACPI_FADT_NO_VGA (1<<2) /* 02: [V4] It is not safe to probe for VGA hardware */
310 #define ACPI_FADT_NO_MSI (1<<3) /* 03: [V4] Message Signaled Interrupts (MSI) must not be enabled */
311 #define ACPI_FADT_NO_ASPM (1<<4) /* 04: [V4] PCIe ASPM control must not be enabled */
313 /* Masks for FADT flags */
315 #define ACPI_FADT_WBINVD (1) /* 00: [V1] The wbinvd instruction works properly */
316 #define ACPI_FADT_WBINVD_FLUSH (1<<1) /* 01: [V1] wbinvd flushes but does not invalidate caches */
317 #define ACPI_FADT_C1_SUPPORTED (1<<2) /* 02: [V1] All processors support C1 state */
318 #define ACPI_FADT_C2_MP_SUPPORTED (1<<3) /* 03: [V1] C2 state works on MP system */
319 #define ACPI_FADT_POWER_BUTTON (1<<4) /* 04: [V1] Power button is handled as a control method device */
320 #define ACPI_FADT_SLEEP_BUTTON (1<<5) /* 05: [V1] Sleep button is handled as a control method device */
321 #define ACPI_FADT_FIXED_RTC (1<<6) /* 06: [V1] RTC wakeup status not in fixed register space */
322 #define ACPI_FADT_S4_RTC_WAKE (1<<7) /* 07: [V1] RTC alarm can wake system from S4 */
323 #define ACPI_FADT_32BIT_TIMER (1<<8) /* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
324 #define ACPI_FADT_DOCKING_SUPPORTED (1<<9) /* 09: [V1] Docking supported */
325 #define ACPI_FADT_RESET_REGISTER (1<<10) /* 10: [V2] System reset via the FADT RESET_REG supported */
326 #define ACPI_FADT_SEALED_CASE (1<<11) /* 11: [V3] No internal expansion capabilities and case is sealed */
327 #define ACPI_FADT_HEADLESS (1<<12) /* 12: [V3] No local video capabilities or local input devices */
328 #define ACPI_FADT_SLEEP_TYPE (1<<13) /* 13: [V3] Must execute native instruction after writing SLP_TYPx register */
329 #define ACPI_FADT_PCI_EXPRESS_WAKE (1<<14) /* 14: [V4] System supports PCIEXP_WAKE (STS/EN) bits (ACPI 3.0) */
330 #define ACPI_FADT_PLATFORM_CLOCK (1<<15) /* 15: [V4] OSPM should use platform-provided timer (ACPI 3.0) */
331 #define ACPI_FADT_S4_RTC_VALID (1<<16) /* 16: [V4] Contents of RTC_STS valid after S4 wake (ACPI 3.0) */
332 #define ACPI_FADT_REMOTE_POWER_ON (1<<17) /* 17: [V4] System is compatible with remote power on (ACPI 3.0) */
333 #define ACPI_FADT_APIC_CLUSTER (1<<18) /* 18: [V4] All local APICs must use cluster model (ACPI 3.0) */
334 #define ACPI_FADT_APIC_PHYSICAL (1<<19) /* 19: [V4] All local xAPICs must use physical dest mode (ACPI 3.0) */
337 /* Values for PreferredProfile (Prefered Power Management Profiles) */
339 enum AcpiPreferedPmProfiles
345 PM_ENTERPRISE_SERVER = 4,
351 /* Reset to default packing */
357 * Internal table-related structures
359 typedef union acpi_name_union
367 /* Internal ACPI Table Descriptor. One per ACPI table. */
369 typedef struct acpi_table_desc
371 ACPI_PHYSICAL_ADDRESS Address;
372 ACPI_TABLE_HEADER *Pointer;
373 UINT32 Length; /* Length fixed at 32 bits */
374 ACPI_NAME_UNION Signature;
375 ACPI_OWNER_ID OwnerId;
380 /* Masks for Flags field above */
382 #define ACPI_TABLE_ORIGIN_UNKNOWN (0)
383 #define ACPI_TABLE_ORIGIN_MAPPED (1)
384 #define ACPI_TABLE_ORIGIN_ALLOCATED (2)
385 #define ACPI_TABLE_ORIGIN_OVERRIDE (4)
386 #define ACPI_TABLE_ORIGIN_MASK (7)
387 #define ACPI_TABLE_IS_LOADED (8)
391 * Get the remaining ACPI tables
393 #include <contrib/dev/acpica/include/actbl1.h>
394 #include <contrib/dev/acpica/include/actbl2.h>
396 /* Macros used to generate offsets to specific table fields */
398 #define ACPI_FADT_OFFSET(f) (UINT8) ACPI_OFFSET (ACPI_TABLE_FADT, f)
401 * Sizes of the various flavors of FADT. We need to look closely
402 * at the FADT length because the version number essentially tells
403 * us nothing because of many BIOS bugs where the version does not
404 * match the expected length. In other words, the length of the
405 * FADT is the bottom line as to what the version really is.
407 * For reference, the values below are as follows:
410 * FADT V3+ size: 0xF4
412 #define ACPI_FADT_V1_SIZE (UINT32) (ACPI_FADT_OFFSET (Flags) + 4)
413 #define ACPI_FADT_V2_SIZE (UINT32) (ACPI_FADT_OFFSET (Reserved4[0]) + 3)
414 #define ACPI_FADT_V3_SIZE (UINT32) (sizeof (ACPI_TABLE_FADT))
416 #endif /* __ACTBL_H__ */