]> CyberLeo.Net >> Repos - FreeBSD/releng/9.2.git/blob - sys/dev/aic7xxx/ahc_pci.c
- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.
[FreeBSD/releng/9.2.git] / sys / dev / aic7xxx / ahc_pci.c
1 /*-
2  * FreeBSD, PCI product support functions
3  *
4  * Copyright (c) 1995-2001 Justin T. Gibbs
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification, immediately at the beginning of the file.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * Alternatively, this software may be distributed under the terms of the
17  * GNU Public License ("GPL").
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29  * SUCH DAMAGE.
30  *
31  * $Id: //depot/aic7xxx/freebsd/dev/aic7xxx/ahc_pci.c#19 $
32  */
33
34 #include <sys/cdefs.h>
35 __FBSDID("$FreeBSD$");
36
37 #include <dev/aic7xxx/aic7xxx_osm.h>
38
39 static int ahc_pci_probe(device_t dev);
40 static int ahc_pci_attach(device_t dev);
41
42 static device_method_t ahc_pci_device_methods[] = {
43         /* Device interface */
44         DEVMETHOD(device_probe,         ahc_pci_probe),
45         DEVMETHOD(device_attach,        ahc_pci_attach),
46         DEVMETHOD(device_detach,        ahc_detach),
47         { 0, 0 }
48 };
49
50 static driver_t ahc_pci_driver = {
51         "ahc",
52         ahc_pci_device_methods,
53         sizeof(struct ahc_softc)
54 };
55
56 DRIVER_MODULE(ahc_pci, pci, ahc_pci_driver, ahc_devclass, 0, 0);
57 MODULE_DEPEND(ahc_pci, ahc, 1, 1, 1);
58 MODULE_VERSION(ahc_pci, 1);
59
60 static int
61 ahc_pci_probe(device_t dev)
62 {
63         struct  ahc_pci_identity *entry;
64
65         entry = ahc_find_pci_device(dev);
66         if (entry != NULL) {
67                 device_set_desc(dev, entry->name);
68                 return (BUS_PROBE_DEFAULT);
69         }
70         return (ENXIO);
71 }
72
73 static int
74 ahc_pci_attach(device_t dev)
75 {
76         struct   ahc_pci_identity *entry;
77         struct   ahc_softc *ahc;
78         char    *name;
79         int      error;
80
81         entry = ahc_find_pci_device(dev);
82         if (entry == NULL)
83                 return (ENXIO);
84
85         /*
86          * Allocate a softc for this card and
87          * set it up for attachment by our
88          * common detect routine.
89          */
90         name = malloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_NOWAIT);
91         if (name == NULL)
92                 return (ENOMEM);
93         strcpy(name, device_get_nameunit(dev));
94         ahc = ahc_alloc(dev, name);
95         if (ahc == NULL)
96                 return (ENOMEM);
97
98         ahc_set_unit(ahc, device_get_unit(dev));
99
100         /*
101          * Should we bother disabling 39Bit addressing
102          * based on installed memory?
103          */
104         if (sizeof(bus_addr_t) > 4)
105                 ahc->flags |= AHC_39BIT_ADDRESSING;
106
107         /* Allocate a dmatag for our SCB DMA maps */
108         error = aic_dma_tag_create(ahc, /*parent*/bus_get_dma_tag(dev),
109                                    /*alignment*/1, /*boundary*/0,
110                                    (ahc->flags & AHC_39BIT_ADDRESSING)
111                                    ? 0x7FFFFFFFFFLL
112                                    : BUS_SPACE_MAXADDR_32BIT,
113                                    /*highaddr*/BUS_SPACE_MAXADDR,
114                                    /*filter*/NULL, /*filterarg*/NULL,
115                                    /*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
116                                    /*nsegments*/AHC_NSEG,
117                                    /*maxsegsz*/AHC_MAXTRANSFER_SIZE,
118                                    /*flags*/0,
119                                    &ahc->parent_dmat);
120
121         if (error != 0) {
122                 printf("ahc_pci_attach: Could not allocate DMA tag "
123                        "- error %d\n", error);
124                 ahc_free(ahc);
125                 return (ENOMEM);
126         }
127         ahc->dev_softc = dev;
128         error = ahc_pci_config(ahc, entry);
129         if (error != 0) {
130                 ahc_free(ahc);
131                 return (error);
132         }
133
134         ahc_attach(ahc);
135         return (0);
136 }
137
138 int
139 ahc_pci_map_registers(struct ahc_softc *ahc)
140 {
141         struct  resource *regs;
142         u_int   command;
143         int     regs_type;
144         int     regs_id;
145         int     allow_memio;
146
147         command = aic_pci_read_config(ahc->dev_softc, PCIR_COMMAND, /*bytes*/1);
148         regs = NULL;
149         regs_type = 0;
150         regs_id = 0;
151
152         /* Retrieve the per-device 'allow_memio' hint */
153         if (resource_int_value(device_get_name(ahc->dev_softc),
154                                device_get_unit(ahc->dev_softc),
155                                "allow_memio", &allow_memio) != 0) {
156                 if (bootverbose)
157                         device_printf(ahc->dev_softc, "Defaulting to MEMIO ");
158 #ifdef AHC_ALLOW_MEMIO
159                 if (bootverbose)
160                         printf("on\n");
161                 allow_memio = 1;
162 #else
163                 if (bootverbose)
164                         printf("off\n");
165                 allow_memio = 0;
166 #endif
167         }
168
169         if ((allow_memio != 0) && (command & PCIM_CMD_MEMEN) != 0) {
170
171                 regs_type = SYS_RES_MEMORY;
172                 regs_id = AHC_PCI_MEMADDR;
173                 regs = bus_alloc_resource_any(ahc->dev_softc, regs_type,
174                                               &regs_id, RF_ACTIVE);
175                 if (regs != NULL) {
176                         ahc->tag = rman_get_bustag(regs);
177                         ahc->bsh = rman_get_bushandle(regs);
178
179                         /*
180                          * Do a quick test to see if memory mapped
181                          * I/O is functioning correctly.
182                          */
183                         if (ahc_pci_test_register_access(ahc) != 0) {
184                                 device_printf(ahc->dev_softc,
185                                        "PCI Device %d:%d:%d failed memory "
186                                        "mapped test.  Using PIO.\n",
187                                        aic_get_pci_bus(ahc->dev_softc),
188                                        aic_get_pci_slot(ahc->dev_softc),
189                                        aic_get_pci_function(ahc->dev_softc));
190                                 bus_release_resource(ahc->dev_softc, regs_type,
191                                                      regs_id, regs);
192                                 regs = NULL;
193                         } else {
194                                 command &= ~PCIM_CMD_PORTEN;
195                                 aic_pci_write_config(ahc->dev_softc,
196                                                      PCIR_COMMAND,
197                                                      command, /*bytes*/1);
198                         }
199                 }
200         }
201
202         if (regs == NULL && (command & PCIM_CMD_PORTEN) != 0) {
203                 regs_type = SYS_RES_IOPORT;
204                 regs_id = AHC_PCI_IOADDR;
205                 regs = bus_alloc_resource_any(ahc->dev_softc, regs_type,
206                                               &regs_id, RF_ACTIVE);
207                 if (regs != NULL) {
208                         ahc->tag = rman_get_bustag(regs);
209                         ahc->bsh = rman_get_bushandle(regs);
210                         if (ahc_pci_test_register_access(ahc) != 0) {
211                                 device_printf(ahc->dev_softc,
212                                        "PCI Device %d:%d:%d failed I/O "
213                                        "mapped test.\n",
214                                        aic_get_pci_bus(ahc->dev_softc),
215                                        aic_get_pci_slot(ahc->dev_softc),
216                                        aic_get_pci_function(ahc->dev_softc));
217                                 bus_release_resource(ahc->dev_softc, regs_type,
218                                                      regs_id, regs);
219                                 regs = NULL;
220                         } else {
221                                 command &= ~PCIM_CMD_MEMEN;
222                                 aic_pci_write_config(ahc->dev_softc,
223                                                      PCIR_COMMAND,
224                                                      command, /*bytes*/1);
225                         }
226                 }
227         }
228         if (regs == NULL) {
229                 device_printf(ahc->dev_softc,
230                               "can't allocate register resources\n");
231                 return (ENOMEM);
232         }
233         ahc->platform_data->regs_res_type = regs_type;
234         ahc->platform_data->regs_res_id = regs_id;
235         ahc->platform_data->regs = regs;
236         return (0);
237 }