]> CyberLeo.Net >> Repos - FreeBSD/releng/9.2.git/blob - sys/dev/aic7xxx/aic7xxx_osm.c
- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.
[FreeBSD/releng/9.2.git] / sys / dev / aic7xxx / aic7xxx_osm.c
1 /*-
2  * Bus independent FreeBSD shim for the aic7xxx based Adaptec SCSI controllers
3  *
4  * Copyright (c) 1994-2001 Justin T. Gibbs.
5  * All rights reserved.
6  *
7  * Redistribution and use in source and binary forms, with or without
8  * modification, are permitted provided that the following conditions
9  * are met:
10  * 1. Redistributions of source code must retain the above copyright
11  *    notice, this list of conditions, and the following disclaimer,
12  *    without modification.
13  * 2. The name of the author may not be used to endorse or promote products
14  *    derived from this software without specific prior written permission.
15  *
16  * Alternatively, this software may be distributed under the terms of the
17  * GNU Public License ("GPL").
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
23  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29  * SUCH DAMAGE.
30  *
31  * $Id: //depot/aic7xxx/freebsd/dev/aic7xxx/aic7xxx_osm.c#20 $
32  */
33
34 #include <sys/cdefs.h>
35 __FBSDID("$FreeBSD$");
36
37 #include <dev/aic7xxx/aic7xxx_osm.h>
38 #include <dev/aic7xxx/aic7xxx_inline.h>
39
40 #include <sys/kthread.h>
41
42 #ifndef AHC_TMODE_ENABLE
43 #define AHC_TMODE_ENABLE 0
44 #endif
45
46 #include <dev/aic7xxx/aic_osm_lib.c>
47
48 #define ccb_scb_ptr spriv_ptr0
49
50 devclass_t ahc_devclass;
51
52 #if 0
53 static void     ahc_dump_targcmd(struct target_cmd *cmd);
54 #endif
55 static int      ahc_modevent(module_t mod, int type, void *data);
56 static void     ahc_action(struct cam_sim *sim, union ccb *ccb);
57 static void     ahc_get_tran_settings(struct ahc_softc *ahc,
58                                       int our_id, char channel,
59                                       struct ccb_trans_settings *cts);
60 static void     ahc_async(void *callback_arg, uint32_t code,
61                           struct cam_path *path, void *arg);
62 static void     ahc_execute_scb(void *arg, bus_dma_segment_t *dm_segs,
63                                 int nsegments, int error);
64 static void     ahc_poll(struct cam_sim *sim);
65 static void     ahc_setup_data(struct ahc_softc *ahc, struct cam_sim *sim,
66                                struct ccb_scsiio *csio, struct scb *scb);
67 static void     ahc_abort_ccb(struct ahc_softc *ahc, struct cam_sim *sim,
68                               union ccb *ccb);
69 static int      ahc_create_path(struct ahc_softc *ahc,
70                                 char channel, u_int target, u_int lun,
71                                 struct cam_path **path);
72
73
74 static int
75 ahc_create_path(struct ahc_softc *ahc, char channel, u_int target,
76                 u_int lun, struct cam_path **path)
77 {
78         path_id_t path_id;
79
80         if (channel == 'B')
81                 path_id = cam_sim_path(ahc->platform_data->sim_b);
82         else 
83                 path_id = cam_sim_path(ahc->platform_data->sim);
84
85         return (xpt_create_path(path, /*periph*/NULL,
86                                 path_id, target, lun));
87 }
88
89 int
90 ahc_map_int(struct ahc_softc *ahc)
91 {
92         int error;
93         int zero;
94         int shareable;
95
96         zero = 0;
97         shareable = (ahc->flags & AHC_EDGE_INTERRUPT) ? 0: RF_SHAREABLE;
98         ahc->platform_data->irq =
99             bus_alloc_resource_any(ahc->dev_softc, SYS_RES_IRQ, &zero,
100                                    RF_ACTIVE | shareable);
101         if (ahc->platform_data->irq == NULL) {
102                 device_printf(ahc->dev_softc,
103                               "bus_alloc_resource() failed to allocate IRQ\n");
104                 return (ENOMEM);
105         }
106         ahc->platform_data->irq_res_type = SYS_RES_IRQ;
107
108         /* Hook up our interrupt handler */
109         error = bus_setup_intr(ahc->dev_softc, ahc->platform_data->irq,
110                                INTR_TYPE_CAM|INTR_MPSAFE, NULL, 
111                                ahc_platform_intr, ahc, &ahc->platform_data->ih);
112
113         if (error != 0)
114                 device_printf(ahc->dev_softc, "bus_setup_intr() failed: %d\n",
115                               error);
116         return (error);
117 }
118
119 int
120 aic7770_map_registers(struct ahc_softc *ahc, u_int unused_ioport_arg)
121 {
122         struct  resource *regs;
123         int     rid;
124
125         rid = 0;
126         regs = bus_alloc_resource_any(ahc->dev_softc, SYS_RES_IOPORT, &rid,
127                                       RF_ACTIVE);
128         if (regs == NULL) {
129                 device_printf(ahc->dev_softc, "Unable to map I/O space?!\n");
130                 return ENOMEM;
131         }
132         ahc->platform_data->regs_res_type = SYS_RES_IOPORT;
133         ahc->platform_data->regs_res_id = rid,
134         ahc->platform_data->regs = regs;
135         ahc->tag = rman_get_bustag(regs);
136         ahc->bsh = rman_get_bushandle(regs);
137         return (0);
138 }
139
140 /*
141  * Attach all the sub-devices we can find
142  */
143 int
144 ahc_attach(struct ahc_softc *ahc)
145 {
146         char   ahc_info[256];
147         struct ccb_setasync csa;
148         struct cam_devq *devq;
149         int bus_id;
150         int bus_id2;
151         struct cam_sim *sim;
152         struct cam_sim *sim2;
153         struct cam_path *path;
154         struct cam_path *path2;
155         int count;
156
157         count = 0;
158         sim = NULL;
159         sim2 = NULL;
160         path = NULL;
161         path2 = NULL;
162
163
164         /*
165          * Create a thread to perform all recovery.
166          */
167         if (ahc_spawn_recovery_thread(ahc) != 0)
168                 goto fail;
169
170         ahc_controller_info(ahc, ahc_info);
171         printf("%s\n", ahc_info);
172         ahc_lock(ahc);
173
174         /*
175          * Attach secondary channel first if the user has
176          * declared it the primary channel.
177          */
178         if ((ahc->features & AHC_TWIN) != 0
179          && (ahc->flags & AHC_PRIMARY_CHANNEL) != 0) {
180                 bus_id = 1;
181                 bus_id2 = 0;
182         } else {
183                 bus_id = 0;
184                 bus_id2 = 1;
185         }
186
187         /*
188          * Create the device queue for our SIM(s).
189          */
190         devq = cam_simq_alloc(AHC_MAX_QUEUE);
191         if (devq == NULL)
192                 goto fail;
193
194         /*
195          * Construct our first channel SIM entry
196          */
197         sim = cam_sim_alloc(ahc_action, ahc_poll, "ahc", ahc,
198                             device_get_unit(ahc->dev_softc),
199                             &ahc->platform_data->mtx, 1, AHC_MAX_QUEUE, devq);
200         if (sim == NULL) {
201                 cam_simq_free(devq);
202                 goto fail;
203         }
204
205         if (xpt_bus_register(sim, ahc->dev_softc, bus_id) != CAM_SUCCESS) {
206                 cam_sim_free(sim, /*free_devq*/TRUE);
207                 sim = NULL;
208                 goto fail;
209         }
210         
211         if (xpt_create_path(&path, /*periph*/NULL,
212                             cam_sim_path(sim), CAM_TARGET_WILDCARD,
213                             CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
214                 xpt_bus_deregister(cam_sim_path(sim));
215                 cam_sim_free(sim, /*free_devq*/TRUE);
216                 sim = NULL;
217                 goto fail;
218         }
219                 
220         xpt_setup_ccb(&csa.ccb_h, path, /*priority*/5);
221         csa.ccb_h.func_code = XPT_SASYNC_CB;
222         csa.event_enable = AC_LOST_DEVICE;
223         csa.callback = ahc_async;
224         csa.callback_arg = sim;
225         xpt_action((union ccb *)&csa);
226         count++;
227
228         if (ahc->features & AHC_TWIN) {
229                 sim2 = cam_sim_alloc(ahc_action, ahc_poll, "ahc",
230                                     ahc, device_get_unit(ahc->dev_softc),
231                                     &ahc->platform_data->mtx, 1,
232                                     AHC_MAX_QUEUE, devq);
233
234                 if (sim2 == NULL) {
235                         printf("ahc_attach: Unable to attach second "
236                                "bus due to resource shortage");
237                         goto fail;
238                 }
239                 
240                 if (xpt_bus_register(sim2, ahc->dev_softc, bus_id2) !=
241                     CAM_SUCCESS) {
242                         printf("ahc_attach: Unable to attach second "
243                                "bus due to resource shortage");
244                         /*
245                          * We do not want to destroy the device queue
246                          * because the first bus is using it.
247                          */
248                         cam_sim_free(sim2, /*free_devq*/FALSE);
249                         goto fail;
250                 }
251
252                 if (xpt_create_path(&path2, /*periph*/NULL,
253                                     cam_sim_path(sim2),
254                                     CAM_TARGET_WILDCARD,
255                                     CAM_LUN_WILDCARD) != CAM_REQ_CMP) {
256                         xpt_bus_deregister(cam_sim_path(sim2));
257                         cam_sim_free(sim2, /*free_devq*/FALSE);
258                         sim2 = NULL;
259                         goto fail;
260                 }
261                 xpt_setup_ccb(&csa.ccb_h, path2, /*priority*/5);
262                 csa.ccb_h.func_code = XPT_SASYNC_CB;
263                 csa.event_enable = AC_LOST_DEVICE;
264                 csa.callback = ahc_async;
265                 csa.callback_arg = sim2;
266                 xpt_action((union ccb *)&csa);
267                 count++;
268         }
269
270 fail:
271         if ((ahc->features & AHC_TWIN) != 0
272          && (ahc->flags & AHC_PRIMARY_CHANNEL) != 0) {
273                 ahc->platform_data->sim_b = sim;
274                 ahc->platform_data->path_b = path;
275                 ahc->platform_data->sim = sim2;
276                 ahc->platform_data->path = path2;
277         } else {
278                 ahc->platform_data->sim = sim;
279                 ahc->platform_data->path = path;
280                 ahc->platform_data->sim_b = sim2;
281                 ahc->platform_data->path_b = path2;
282         }
283         ahc_unlock(ahc);
284
285         if (count != 0) {
286                 /* We have to wait until after any system dumps... */
287                 ahc->platform_data->eh =
288                     EVENTHANDLER_REGISTER(shutdown_final, ahc_shutdown,
289                                           ahc, SHUTDOWN_PRI_DEFAULT);
290                 ahc_intr_enable(ahc, TRUE);
291         }
292
293         return (count);
294 }
295
296 /*
297  * Catch an interrupt from the adapter
298  */
299 void
300 ahc_platform_intr(void *arg)
301 {
302         struct  ahc_softc *ahc;
303
304         ahc = (struct ahc_softc *)arg; 
305         ahc_lock(ahc);
306         ahc_intr(ahc);
307         ahc_unlock(ahc);
308 }
309
310 /*
311  * We have an scb which has been processed by the
312  * adaptor, now we look to see how the operation
313  * went.
314  */
315 void
316 ahc_done(struct ahc_softc *ahc, struct scb *scb)
317 {
318         union ccb *ccb;
319
320         CAM_DEBUG(scb->io_ctx->ccb_h.path, CAM_DEBUG_TRACE,
321                   ("ahc_done - scb %d\n", scb->hscb->tag));
322
323         ccb = scb->io_ctx;
324         LIST_REMOVE(scb, pending_links);
325         if ((scb->flags & SCB_TIMEDOUT) != 0)
326                 LIST_REMOVE(scb, timedout_links);
327         if ((scb->flags & SCB_UNTAGGEDQ) != 0) {
328                 struct scb_tailq *untagged_q;
329                 int target_offset;
330
331                 target_offset = SCB_GET_TARGET_OFFSET(ahc, scb);
332                 untagged_q = &ahc->untagged_queues[target_offset];
333                 TAILQ_REMOVE(untagged_q, scb, links.tqe);
334                 scb->flags &= ~SCB_UNTAGGEDQ;
335                 ahc_run_untagged_queue(ahc, untagged_q);
336         }
337
338         callout_stop(&scb->io_timer);
339
340         if ((ccb->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
341                 bus_dmasync_op_t op;
342
343                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
344                         op = BUS_DMASYNC_POSTREAD;
345                 else
346                         op = BUS_DMASYNC_POSTWRITE;
347                 bus_dmamap_sync(ahc->buffer_dmat, scb->dmamap, op);
348                 bus_dmamap_unload(ahc->buffer_dmat, scb->dmamap);
349         }
350
351         if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
352                 struct cam_path *ccb_path;
353
354                 /*
355                  * If we have finally disconnected, clean up our
356                  * pending device state.
357                  * XXX - There may be error states that cause where
358                  *       we will remain connected.
359                  */
360                 ccb_path = ccb->ccb_h.path;
361                 if (ahc->pending_device != NULL
362                  && xpt_path_comp(ahc->pending_device->path, ccb_path) == 0) {
363
364                         if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
365                                 ahc->pending_device = NULL;
366                         } else {
367                                 if (bootverbose) {
368                                         xpt_print_path(ccb->ccb_h.path);
369                                         printf("Still connected\n");
370                                 }
371                                 aic_freeze_ccb(ccb);
372                         }
373                 }
374
375                 if (aic_get_transaction_status(scb) == CAM_REQ_INPROG)
376                         ccb->ccb_h.status |= CAM_REQ_CMP;
377                 ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
378                 ahc_free_scb(ahc, scb);
379                 xpt_done(ccb);
380                 return;
381         }
382
383         /*
384          * If the recovery SCB completes, we have to be
385          * out of our timeout.
386          */
387         if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
388                 struct  scb *list_scb;
389
390                 ahc->scb_data->recovery_scbs--;
391
392                 if (aic_get_transaction_status(scb) == CAM_BDR_SENT
393                  || aic_get_transaction_status(scb) == CAM_REQ_ABORTED)
394                         aic_set_transaction_status(scb, CAM_CMD_TIMEOUT);
395
396                 if (ahc->scb_data->recovery_scbs == 0) {
397                         /*
398                          * All recovery actions have completed successfully,
399                          * so reinstate the timeouts for all other pending
400                          * commands.
401                          */
402                         LIST_FOREACH(list_scb, &ahc->pending_scbs,
403                                      pending_links) {
404
405                                 aic_scb_timer_reset(list_scb,
406                                                     aic_get_timeout(scb));
407                         }
408
409                         ahc_print_path(ahc, scb);
410                         printf("no longer in timeout, status = %x\n",
411                                ccb->ccb_h.status);
412                 }
413         }
414
415         /* Don't clobber any existing error state */
416         if (aic_get_transaction_status(scb) == CAM_REQ_INPROG) {
417                 ccb->ccb_h.status |= CAM_REQ_CMP;
418         } else if ((scb->flags & SCB_SENSE) != 0) {
419                 /*
420                  * We performed autosense retrieval.
421                  *
422                  * Zero any sense not transferred by the
423                  * device.  The SCSI spec mandates that any
424                  * untransfered data should be assumed to be
425                  * zero.  Complete the 'bounce' of sense information
426                  * through buffers accessible via bus-space by
427                  * copying it into the clients csio.
428                  */
429                 memset(&ccb->csio.sense_data, 0, sizeof(ccb->csio.sense_data));
430                 memcpy(&ccb->csio.sense_data,
431                        ahc_get_sense_buf(ahc, scb),
432                        (aic_le32toh(scb->sg_list->len) & AHC_SG_LEN_MASK)
433                        - ccb->csio.sense_resid);
434                 scb->io_ctx->ccb_h.status |= CAM_AUTOSNS_VALID;
435         }
436         ccb->ccb_h.status &= ~CAM_SIM_QUEUED;
437         ahc_free_scb(ahc, scb);
438         xpt_done(ccb);
439 }
440
441 static void
442 ahc_action(struct cam_sim *sim, union ccb *ccb)
443 {
444         struct  ahc_softc *ahc;
445         struct  ahc_tmode_lstate *lstate;
446         u_int   target_id;
447         u_int   our_id;
448
449         CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_TRACE, ("ahc_action\n"));
450         
451         ahc = (struct ahc_softc *)cam_sim_softc(sim);
452
453         target_id = ccb->ccb_h.target_id;
454         our_id = SIM_SCSI_ID(ahc, sim);
455         
456         switch (ccb->ccb_h.func_code) {
457         /* Common cases first */
458         case XPT_ACCEPT_TARGET_IO:      /* Accept Host Target Mode CDB */
459         case XPT_CONT_TARGET_IO:/* Continue Host Target I/O Connection*/
460         {
461                 struct     ahc_tmode_tstate *tstate;
462                 cam_status status;
463
464                 status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate,
465                                              &lstate, TRUE);
466
467                 if (status != CAM_REQ_CMP) {
468                         if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
469                                 /* Response from the black hole device */
470                                 tstate = NULL;
471                                 lstate = ahc->black_hole;
472                         } else {
473                                 ccb->ccb_h.status = status;
474                                 xpt_done(ccb);
475                                 break;
476                         }
477                 }
478                 if (ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO) {
479
480                         SLIST_INSERT_HEAD(&lstate->accept_tios, &ccb->ccb_h,
481                                           sim_links.sle);
482                         ccb->ccb_h.status = CAM_REQ_INPROG;
483                         if ((ahc->flags & AHC_TQINFIFO_BLOCKED) != 0)
484                                 ahc_run_tqinfifo(ahc, /*paused*/FALSE);
485                         break;
486                 }
487
488                 /*
489                  * The target_id represents the target we attempt to
490                  * select.  In target mode, this is the initiator of
491                  * the original command.
492                  */
493                 our_id = target_id;
494                 target_id = ccb->csio.init_id;
495                 /* FALLTHROUGH */
496         }
497         case XPT_SCSI_IO:       /* Execute the requested I/O operation */
498         case XPT_RESET_DEV:     /* Bus Device Reset the specified SCSI device */
499         {
500                 struct  scb *scb;
501                 struct  hardware_scb *hscb;     
502
503                 if ((ahc->flags & AHC_INITIATORROLE) == 0
504                  && (ccb->ccb_h.func_code == XPT_SCSI_IO
505                   || ccb->ccb_h.func_code == XPT_RESET_DEV)) {
506                         ccb->ccb_h.status = CAM_PROVIDE_FAIL;
507                         xpt_done(ccb);
508                         return;
509                 }
510
511                 /*
512                  * get an scb to use.
513                  */
514                 if ((scb = ahc_get_scb(ahc)) == NULL) {
515         
516                         xpt_freeze_simq(sim, /*count*/1);
517                         ahc->flags |= AHC_RESOURCE_SHORTAGE;
518                         ccb->ccb_h.status = CAM_REQUEUE_REQ;
519                         xpt_done(ccb);
520                         return;
521                 }
522                 
523                 hscb = scb->hscb;
524                 
525                 CAM_DEBUG(ccb->ccb_h.path, CAM_DEBUG_SUBTRACE,
526                           ("start scb(%p)\n", scb));
527                 scb->io_ctx = ccb;
528                 /*
529                  * So we can find the SCB when an abort is requested
530                  */
531                 ccb->ccb_h.ccb_scb_ptr = scb;
532
533                 /*
534                  * Put all the arguments for the xfer in the scb
535                  */
536                 hscb->control = 0;
537                 hscb->scsiid = BUILD_SCSIID(ahc, sim, target_id, our_id);
538                 hscb->lun = ccb->ccb_h.target_lun;
539                 if (ccb->ccb_h.func_code == XPT_RESET_DEV) {
540                         hscb->cdb_len = 0;
541                         scb->flags |= SCB_DEVICE_RESET;
542                         hscb->control |= MK_MESSAGE;
543                         ahc_execute_scb(scb, NULL, 0, 0);
544                 } else {
545                         if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
546                                 struct target_data *tdata;
547
548                                 tdata = &hscb->shared_data.tdata;
549                                 if (ahc->pending_device == lstate)
550                                         scb->flags |= SCB_TARGET_IMMEDIATE;
551                                 hscb->control |= TARGET_SCB;
552                                 scb->flags |= SCB_TARGET_SCB;
553                                 tdata->target_phases = 0;
554                                 if ((ccb->ccb_h.flags & CAM_SEND_STATUS) != 0) {
555                                         tdata->target_phases |= SPHASE_PENDING;
556                                         tdata->scsi_status =
557                                             ccb->csio.scsi_status;
558                                 }
559                                 if (ccb->ccb_h.flags & CAM_DIS_DISCONNECT)
560                                         tdata->target_phases |= NO_DISCONNECT;
561
562                                 tdata->initiator_tag = ccb->csio.tag_id;
563                         }
564                         if (ccb->ccb_h.flags & CAM_TAG_ACTION_VALID)
565                                 hscb->control |= ccb->csio.tag_action;
566                         
567                         ahc_setup_data(ahc, sim, &ccb->csio, scb);
568                 }
569                 break;
570         }
571         case XPT_NOTIFY_ACKNOWLEDGE:
572         case XPT_IMMEDIATE_NOTIFY:
573         {
574                 struct     ahc_tmode_tstate *tstate;
575                 struct     ahc_tmode_lstate *lstate;
576                 cam_status status;
577
578                 status = ahc_find_tmode_devs(ahc, sim, ccb, &tstate,
579                                              &lstate, TRUE);
580
581                 if (status != CAM_REQ_CMP) {
582                         ccb->ccb_h.status = status;
583                         xpt_done(ccb);
584                         break;
585                 }
586                 SLIST_INSERT_HEAD(&lstate->immed_notifies, &ccb->ccb_h,
587                                   sim_links.sle);
588                 ccb->ccb_h.status = CAM_REQ_INPROG;
589                 ahc_send_lstate_events(ahc, lstate);
590                 break;
591         }
592         case XPT_EN_LUN:                /* Enable LUN as a target */
593                 ahc_handle_en_lun(ahc, sim, ccb);
594                 xpt_done(ccb);
595                 break;
596         case XPT_ABORT:                 /* Abort the specified CCB */
597         {
598                 ahc_abort_ccb(ahc, sim, ccb);
599                 break;
600         }
601         case XPT_SET_TRAN_SETTINGS:
602         {
603                 struct  ahc_devinfo devinfo;
604                 struct  ccb_trans_settings *cts;
605                 struct  ccb_trans_settings_scsi *scsi;
606                 struct  ccb_trans_settings_spi *spi;
607                 struct  ahc_initiator_tinfo *tinfo;
608                 struct  ahc_tmode_tstate *tstate;
609                 uint16_t *discenable;
610                 uint16_t *tagenable;
611                 u_int   update_type;
612
613                 cts = &ccb->cts;
614                 scsi = &cts->proto_specific.scsi;
615                 spi = &cts->xport_specific.spi;
616                 ahc_compile_devinfo(&devinfo, SIM_SCSI_ID(ahc, sim),
617                                     cts->ccb_h.target_id,
618                                     cts->ccb_h.target_lun,
619                                     SIM_CHANNEL(ahc, sim),
620                                     ROLE_UNKNOWN);
621                 tinfo = ahc_fetch_transinfo(ahc, devinfo.channel,
622                                             devinfo.our_scsiid,
623                                             devinfo.target, &tstate);
624                 update_type = 0;
625                 if (cts->type == CTS_TYPE_CURRENT_SETTINGS) {
626                         update_type |= AHC_TRANS_GOAL;
627                         discenable = &tstate->discenable;
628                         tagenable = &tstate->tagenable;
629                         tinfo->curr.protocol_version =
630                             cts->protocol_version;
631                         tinfo->curr.transport_version =
632                             cts->transport_version;
633                         tinfo->goal.protocol_version =
634                             cts->protocol_version;
635                         tinfo->goal.transport_version =
636                             cts->transport_version;
637                 } else if (cts->type == CTS_TYPE_USER_SETTINGS) {
638                         update_type |= AHC_TRANS_USER;
639                         discenable = &ahc->user_discenable;
640                         tagenable = &ahc->user_tagenable;
641                         tinfo->user.protocol_version =
642                             cts->protocol_version;
643                         tinfo->user.transport_version =
644                             cts->transport_version;
645                 } else {
646                         ccb->ccb_h.status = CAM_REQ_INVALID;
647                         xpt_done(ccb);
648                         break;
649                 }
650                 
651                 if ((spi->valid & CTS_SPI_VALID_DISC) != 0) {
652                         if ((spi->flags & CTS_SPI_FLAGS_DISC_ENB) != 0)
653                                 *discenable |= devinfo.target_mask;
654                         else
655                                 *discenable &= ~devinfo.target_mask;
656                 }
657                 
658                 if ((scsi->valid & CTS_SCSI_VALID_TQ) != 0) {
659                         if ((scsi->flags & CTS_SCSI_FLAGS_TAG_ENB) != 0)
660                                 *tagenable |= devinfo.target_mask;
661                         else
662                                 *tagenable &= ~devinfo.target_mask;
663                 }       
664
665                 if ((spi->valid & CTS_SPI_VALID_BUS_WIDTH) != 0) {
666                         ahc_validate_width(ahc, /*tinfo limit*/NULL,
667                                            &spi->bus_width, ROLE_UNKNOWN);
668                         ahc_set_width(ahc, &devinfo, spi->bus_width,
669                                       update_type, /*paused*/FALSE);
670                 }
671
672                 if ((spi->valid & CTS_SPI_VALID_PPR_OPTIONS) == 0) {
673                         if (update_type == AHC_TRANS_USER)
674                                 spi->ppr_options = tinfo->user.ppr_options;
675                         else
676                                 spi->ppr_options = tinfo->goal.ppr_options;
677                 }
678
679                 if ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) == 0) {
680                         if (update_type == AHC_TRANS_USER)
681                                 spi->sync_offset = tinfo->user.offset;
682                         else
683                                 spi->sync_offset = tinfo->goal.offset;
684                 }
685
686                 if ((spi->valid & CTS_SPI_VALID_SYNC_RATE) == 0) {
687                         if (update_type == AHC_TRANS_USER)
688                                 spi->sync_period = tinfo->user.period;
689                         else
690                                 spi->sync_period = tinfo->goal.period;
691                 }
692
693                 if (((spi->valid & CTS_SPI_VALID_SYNC_RATE) != 0)
694                  || ((spi->valid & CTS_SPI_VALID_SYNC_OFFSET) != 0)) {
695                         struct ahc_syncrate *syncrate;
696                         u_int maxsync;
697
698                         if ((ahc->features & AHC_ULTRA2) != 0)
699                                 maxsync = AHC_SYNCRATE_DT;
700                         else if ((ahc->features & AHC_ULTRA) != 0)
701                                 maxsync = AHC_SYNCRATE_ULTRA;
702                         else
703                                 maxsync = AHC_SYNCRATE_FAST;
704
705                         if (spi->bus_width != MSG_EXT_WDTR_BUS_16_BIT)
706                                 spi->ppr_options &= ~MSG_EXT_PPR_DT_REQ;
707
708                         syncrate = ahc_find_syncrate(ahc, &spi->sync_period,
709                                                      &spi->ppr_options,
710                                                      maxsync);
711                         ahc_validate_offset(ahc, /*tinfo limit*/NULL,
712                                             syncrate, &spi->sync_offset,
713                                             spi->bus_width, ROLE_UNKNOWN);
714
715                         /* We use a period of 0 to represent async */
716                         if (spi->sync_offset == 0) {
717                                 spi->sync_period = 0;
718                                 spi->ppr_options = 0;
719                         }
720
721                         ahc_set_syncrate(ahc, &devinfo, syncrate,
722                                          spi->sync_period, spi->sync_offset,
723                                          spi->ppr_options, update_type,
724                                          /*paused*/FALSE);
725                 }
726                 ccb->ccb_h.status = CAM_REQ_CMP;
727                 xpt_done(ccb);
728                 break;
729         }
730         case XPT_GET_TRAN_SETTINGS:
731         /* Get default/user set transfer settings for the target */
732         {
733
734                 ahc_get_tran_settings(ahc, SIM_SCSI_ID(ahc, sim),
735                                       SIM_CHANNEL(ahc, sim), &ccb->cts);
736                 xpt_done(ccb);
737                 break;
738         }
739         case XPT_CALC_GEOMETRY:
740         {
741                 int extended;
742
743                 extended = SIM_IS_SCSIBUS_B(ahc, sim)
744                          ? ahc->flags & AHC_EXTENDED_TRANS_B
745                          : ahc->flags & AHC_EXTENDED_TRANS_A;
746                 aic_calc_geometry(&ccb->ccg, extended);
747                 xpt_done(ccb);
748                 break;
749         }
750         case XPT_RESET_BUS:             /* Reset the specified SCSI bus */
751         {
752                 int  found;
753                 
754                 found = ahc_reset_channel(ahc, SIM_CHANNEL(ahc, sim),
755                                           /*initiate reset*/TRUE);
756                 if (bootverbose) {
757                         xpt_print_path(SIM_PATH(ahc, sim));
758                         printf("SCSI bus reset delivered. "
759                                "%d SCBs aborted.\n", found);
760                 }
761                 ccb->ccb_h.status = CAM_REQ_CMP;
762                 xpt_done(ccb);
763                 break;
764         }
765         case XPT_TERM_IO:               /* Terminate the I/O process */
766                 /* XXX Implement */
767                 ccb->ccb_h.status = CAM_REQ_INVALID;
768                 xpt_done(ccb);
769                 break;
770         case XPT_PATH_INQ:              /* Path routing inquiry */
771         {
772                 struct ccb_pathinq *cpi = &ccb->cpi;
773                 
774                 cpi->version_num = 1; /* XXX??? */
775                 cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE;
776                 if ((ahc->features & AHC_WIDE) != 0)
777                         cpi->hba_inquiry |= PI_WIDE_16;
778                 if ((ahc->features & AHC_TARGETMODE) != 0) {
779                         cpi->target_sprt = PIT_PROCESSOR
780                                          | PIT_DISCONNECT
781                                          | PIT_TERM_IO;
782                 } else {
783                         cpi->target_sprt = 0;
784                 }
785                 cpi->hba_misc = 0;
786                 cpi->hba_eng_cnt = 0;
787                 cpi->max_target = (ahc->features & AHC_WIDE) ? 15 : 7;
788                 cpi->max_lun = AHC_NUM_LUNS - 1;
789                 if (SIM_IS_SCSIBUS_B(ahc, sim)) {
790                         cpi->initiator_id = ahc->our_id_b;
791                         if ((ahc->flags & AHC_RESET_BUS_B) == 0)
792                                 cpi->hba_misc |= PIM_NOBUSRESET;
793                 } else {
794                         cpi->initiator_id = ahc->our_id;
795                         if ((ahc->flags & AHC_RESET_BUS_A) == 0)
796                                 cpi->hba_misc |= PIM_NOBUSRESET;
797                 }
798                 cpi->bus_id = cam_sim_bus(sim);
799                 cpi->base_transfer_speed = 3300;
800                 strncpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
801                 strncpy(cpi->hba_vid, "Adaptec", HBA_IDLEN);
802                 strncpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
803                 cpi->unit_number = cam_sim_unit(sim);
804                 cpi->protocol = PROTO_SCSI;
805                 cpi->protocol_version = SCSI_REV_2;
806                 cpi->transport = XPORT_SPI;
807                 cpi->transport_version = 2;
808                 cpi->xport_specific.spi.ppr_options = SID_SPI_CLOCK_ST;
809                 if ((ahc->features & AHC_DT) != 0) {
810                         cpi->transport_version = 3;
811                         cpi->xport_specific.spi.ppr_options =
812                             SID_SPI_CLOCK_DT_ST;
813                 }
814                 cpi->ccb_h.status = CAM_REQ_CMP;
815                 xpt_done(ccb);
816                 break;
817         }
818         default:
819                 ccb->ccb_h.status = CAM_PROVIDE_FAIL;
820                 xpt_done(ccb);
821                 break;
822         }
823 }
824
825 static void
826 ahc_get_tran_settings(struct ahc_softc *ahc, int our_id, char channel,
827                       struct ccb_trans_settings *cts)
828 {
829         struct  ahc_devinfo devinfo;
830         struct  ccb_trans_settings_scsi *scsi;
831         struct  ccb_trans_settings_spi *spi;
832         struct  ahc_initiator_tinfo *targ_info;
833         struct  ahc_tmode_tstate *tstate;
834         struct  ahc_transinfo *tinfo;
835
836         scsi = &cts->proto_specific.scsi;
837         spi = &cts->xport_specific.spi;
838         ahc_compile_devinfo(&devinfo, our_id,
839                             cts->ccb_h.target_id,
840                             cts->ccb_h.target_lun,
841                             channel, ROLE_UNKNOWN);
842         targ_info = ahc_fetch_transinfo(ahc, devinfo.channel,
843                                         devinfo.our_scsiid,
844                                         devinfo.target, &tstate);
845         
846         if (cts->type == CTS_TYPE_CURRENT_SETTINGS)
847                 tinfo = &targ_info->curr;
848         else
849                 tinfo = &targ_info->user;
850         
851         scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
852         spi->flags &= ~CTS_SPI_FLAGS_DISC_ENB;
853         if (cts->type == CTS_TYPE_USER_SETTINGS) {
854                 if ((ahc->user_discenable & devinfo.target_mask) != 0)
855                         spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
856
857                 if ((ahc->user_tagenable & devinfo.target_mask) != 0)
858                         scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
859         } else {
860                 if ((tstate->discenable & devinfo.target_mask) != 0)
861                         spi->flags |= CTS_SPI_FLAGS_DISC_ENB;
862
863                 if ((tstate->tagenable & devinfo.target_mask) != 0)
864                         scsi->flags |= CTS_SCSI_FLAGS_TAG_ENB;
865         }
866         cts->protocol_version = tinfo->protocol_version;
867         cts->transport_version = tinfo->transport_version;
868
869         spi->sync_period = tinfo->period;
870         spi->sync_offset = tinfo->offset;
871         spi->bus_width = tinfo->width;
872         spi->ppr_options = tinfo->ppr_options;
873         
874         cts->protocol = PROTO_SCSI;
875         cts->transport = XPORT_SPI;
876         spi->valid = CTS_SPI_VALID_SYNC_RATE
877                    | CTS_SPI_VALID_SYNC_OFFSET
878                    | CTS_SPI_VALID_BUS_WIDTH
879                    | CTS_SPI_VALID_PPR_OPTIONS;
880
881         if (cts->ccb_h.target_lun != CAM_LUN_WILDCARD) {
882                 scsi->valid = CTS_SCSI_VALID_TQ;
883                 spi->valid |= CTS_SPI_VALID_DISC;
884         } else {
885                 scsi->valid = 0;
886         }
887
888         cts->ccb_h.status = CAM_REQ_CMP;
889 }
890
891 static void
892 ahc_async(void *callback_arg, uint32_t code, struct cam_path *path, void *arg)
893 {
894         struct ahc_softc *ahc;
895         struct cam_sim *sim;
896
897         sim = (struct cam_sim *)callback_arg;
898         ahc = (struct ahc_softc *)cam_sim_softc(sim);
899         switch (code) {
900         case AC_LOST_DEVICE:
901         {
902                 struct  ahc_devinfo devinfo;
903
904                 ahc_compile_devinfo(&devinfo, SIM_SCSI_ID(ahc, sim),
905                                     xpt_path_target_id(path),
906                                     xpt_path_lun_id(path),
907                                     SIM_CHANNEL(ahc, sim),
908                                     ROLE_UNKNOWN);
909
910                 /*
911                  * Revert to async/narrow transfers
912                  * for the next device.
913                  */
914                 ahc_set_width(ahc, &devinfo, MSG_EXT_WDTR_BUS_8_BIT,
915                               AHC_TRANS_GOAL|AHC_TRANS_CUR, /*paused*/FALSE);
916                 ahc_set_syncrate(ahc, &devinfo, /*syncrate*/NULL,
917                                  /*period*/0, /*offset*/0, /*ppr_options*/0,
918                                  AHC_TRANS_GOAL|AHC_TRANS_CUR,
919                                  /*paused*/FALSE);
920                 break;
921         }
922         default:
923                 break;
924         }
925 }
926
927 static void
928 ahc_execute_scb(void *arg, bus_dma_segment_t *dm_segs, int nsegments,
929                 int error)
930 {
931         struct  scb *scb;
932         union   ccb *ccb;
933         struct  ahc_softc *ahc;
934         struct  ahc_initiator_tinfo *tinfo;
935         struct  ahc_tmode_tstate *tstate;
936         u_int   mask;
937
938         scb = (struct scb *)arg;
939         ccb = scb->io_ctx;
940         ahc = scb->ahc_softc;
941
942         if (error != 0) {
943                 if (error == EFBIG)
944                         aic_set_transaction_status(scb, CAM_REQ_TOO_BIG);
945                 else
946                         aic_set_transaction_status(scb, CAM_REQ_CMP_ERR);
947                 if (nsegments != 0)
948                         bus_dmamap_unload(ahc->buffer_dmat, scb->dmamap);
949                 ahc_free_scb(ahc, scb);
950                 xpt_done(ccb);
951                 return;
952         }
953         if (nsegments != 0) {
954                 struct    ahc_dma_seg *sg;
955                 bus_dma_segment_t *end_seg;
956                 bus_dmasync_op_t op;
957
958                 end_seg = dm_segs + nsegments;
959
960                 /* Copy the segments into our SG list */
961                 sg = scb->sg_list;
962                 while (dm_segs < end_seg) {
963                         uint32_t len;
964
965                         sg->addr = aic_htole32(dm_segs->ds_addr);
966                         len = dm_segs->ds_len
967                             | ((dm_segs->ds_addr >> 8) & 0x7F000000);
968                         sg->len = aic_htole32(len);
969                         sg++;
970                         dm_segs++;
971                 }
972                 
973                 /*
974                  * Note where to find the SG entries in bus space.
975                  * We also set the full residual flag which the 
976                  * sequencer will clear as soon as a data transfer
977                  * occurs.
978                  */
979                 scb->hscb->sgptr = aic_htole32(scb->sg_list_phys|SG_FULL_RESID);
980
981                 if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
982                         op = BUS_DMASYNC_PREREAD;
983                 else
984                         op = BUS_DMASYNC_PREWRITE;
985
986                 bus_dmamap_sync(ahc->buffer_dmat, scb->dmamap, op);
987
988                 if (ccb->ccb_h.func_code == XPT_CONT_TARGET_IO) {
989                         struct target_data *tdata;
990
991                         tdata = &scb->hscb->shared_data.tdata;
992                         tdata->target_phases |= DPHASE_PENDING;
993                         /*
994                          * CAM data direction is relative to the initiator.
995                          */
996                         if ((ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
997                                 tdata->data_phase = P_DATAOUT;
998                         else
999                                 tdata->data_phase = P_DATAIN;
1000
1001                         /*
1002                          * If the transfer is of an odd length and in the
1003                          * "in" direction (scsi->HostBus), then it may
1004                          * trigger a bug in the 'WideODD' feature of
1005                          * non-Ultra2 chips.  Force the total data-length
1006                          * to be even by adding an extra, 1 byte, SG,
1007                          * element.  We do this even if we are not currently
1008                          * negotiated wide as negotiation could occur before
1009                          * this command is executed.
1010                          */
1011                         if ((ahc->bugs & AHC_TMODE_WIDEODD_BUG) != 0
1012                          && (ccb->csio.dxfer_len & 0x1) != 0
1013                          && (ccb->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT) {
1014
1015                                 nsegments++;
1016                                 if (nsegments > AHC_NSEG) {
1017
1018                                         aic_set_transaction_status(scb,
1019                                             CAM_REQ_TOO_BIG);
1020                                         bus_dmamap_unload(ahc->buffer_dmat,
1021                                                           scb->dmamap);
1022                                         ahc_free_scb(ahc, scb);
1023                                         xpt_done(ccb);
1024                                         return;
1025                                 }
1026                                 sg->addr = aic_htole32(ahc->dma_bug_buf);
1027                                 sg->len = aic_htole32(1);
1028                                 sg++;
1029                         }
1030                 }
1031                 sg--;
1032                 sg->len |= aic_htole32(AHC_DMA_LAST_SEG);
1033
1034                 /* Copy the first SG into the "current" data pointer area */
1035                 scb->hscb->dataptr = scb->sg_list->addr;
1036                 scb->hscb->datacnt = scb->sg_list->len;
1037         } else {
1038                 scb->hscb->sgptr = aic_htole32(SG_LIST_NULL);
1039                 scb->hscb->dataptr = 0;
1040                 scb->hscb->datacnt = 0;
1041         }
1042         
1043         scb->sg_count = nsegments;
1044
1045         /*
1046          * Last time we need to check if this SCB needs to
1047          * be aborted.
1048          */
1049         if (aic_get_transaction_status(scb) != CAM_REQ_INPROG) {
1050                 if (nsegments != 0)
1051                         bus_dmamap_unload(ahc->buffer_dmat, scb->dmamap);
1052                 ahc_free_scb(ahc, scb);
1053                 xpt_done(ccb);
1054                 return;
1055         }
1056
1057         tinfo = ahc_fetch_transinfo(ahc, SCSIID_CHANNEL(ahc, scb->hscb->scsiid),
1058                                     SCSIID_OUR_ID(scb->hscb->scsiid),
1059                                     SCSIID_TARGET(ahc, scb->hscb->scsiid),
1060                                     &tstate);
1061
1062         mask = SCB_GET_TARGET_MASK(ahc, scb);
1063         scb->hscb->scsirate = tinfo->scsirate;
1064         scb->hscb->scsioffset = tinfo->curr.offset;
1065         if ((tstate->ultraenb & mask) != 0)
1066                 scb->hscb->control |= ULTRAENB;
1067
1068         if ((tstate->discenable & mask) != 0
1069          && (ccb->ccb_h.flags & CAM_DIS_DISCONNECT) == 0)
1070                 scb->hscb->control |= DISCENB;
1071
1072         if ((ccb->ccb_h.flags & CAM_NEGOTIATE) != 0
1073          && (tinfo->goal.width != 0
1074           || tinfo->goal.offset != 0
1075           || tinfo->goal.ppr_options != 0)) {
1076                 scb->flags |= SCB_NEGOTIATE;
1077                 scb->hscb->control |= MK_MESSAGE;
1078         } else if ((tstate->auto_negotiate & mask) != 0) {
1079                 scb->flags |= SCB_AUTO_NEGOTIATE;
1080                 scb->hscb->control |= MK_MESSAGE;
1081         }
1082
1083         LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links);
1084
1085         ccb->ccb_h.status |= CAM_SIM_QUEUED;
1086
1087         /*
1088          * We only allow one untagged transaction
1089          * per target in the initiator role unless
1090          * we are storing a full busy target *lun*
1091          * table in SCB space.
1092          */
1093         if ((scb->hscb->control & (TARGET_SCB|TAG_ENB)) == 0
1094          && (ahc->flags & AHC_SCB_BTT) == 0) {
1095                 struct scb_tailq *untagged_q;
1096                 int target_offset;
1097
1098                 target_offset = SCB_GET_TARGET_OFFSET(ahc, scb);
1099                 untagged_q = &(ahc->untagged_queues[target_offset]);
1100                 TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe);
1101                 scb->flags |= SCB_UNTAGGEDQ;
1102                 if (TAILQ_FIRST(untagged_q) != scb) {
1103                         return;
1104                 }
1105         }
1106         scb->flags |= SCB_ACTIVE;
1107
1108         /*
1109          * Timers are disabled while recovery is in progress.
1110          */
1111         aic_scb_timer_start(scb);
1112
1113         if ((scb->flags & SCB_TARGET_IMMEDIATE) != 0) {
1114                 /* Define a mapping from our tag to the SCB. */
1115                 ahc->scb_data->scbindex[scb->hscb->tag] = scb;
1116                 ahc_pause(ahc);
1117                 if ((ahc->flags & AHC_PAGESCBS) == 0)
1118                         ahc_outb(ahc, SCBPTR, scb->hscb->tag);
1119                 ahc_outb(ahc, TARG_IMMEDIATE_SCB, scb->hscb->tag);
1120                 ahc_unpause(ahc);
1121         } else {
1122                 ahc_queue_scb(ahc, scb);
1123         }
1124 }
1125
1126 static void
1127 ahc_poll(struct cam_sim *sim)
1128 {
1129         struct ahc_softc *ahc;
1130
1131         ahc = (struct ahc_softc *)cam_sim_softc(sim);
1132         ahc_intr(ahc);
1133 }
1134
1135 static void
1136 ahc_setup_data(struct ahc_softc *ahc, struct cam_sim *sim,
1137                struct ccb_scsiio *csio, struct scb *scb)
1138 {
1139         struct hardware_scb *hscb;
1140         struct ccb_hdr *ccb_h;
1141         int error;
1142         
1143         hscb = scb->hscb;
1144         ccb_h = &csio->ccb_h;
1145         
1146         csio->resid = 0;
1147         csio->sense_resid = 0;
1148         if (ccb_h->func_code == XPT_SCSI_IO) {
1149                 hscb->cdb_len = csio->cdb_len;
1150                 if ((ccb_h->flags & CAM_CDB_POINTER) != 0) {
1151
1152                         if (hscb->cdb_len > sizeof(hscb->cdb32)
1153                          || (ccb_h->flags & CAM_CDB_PHYS) != 0) {
1154                                 aic_set_transaction_status(scb,
1155                                                            CAM_REQ_INVALID);
1156                                 ahc_free_scb(ahc, scb);
1157                                 xpt_done((union ccb *)csio);
1158                                 return;
1159                         }
1160                         if (hscb->cdb_len > 12) {
1161                                 memcpy(hscb->cdb32, 
1162                                        csio->cdb_io.cdb_ptr,
1163                                        hscb->cdb_len);
1164                                 scb->flags |= SCB_CDB32_PTR;
1165                         } else {
1166                                 memcpy(hscb->shared_data.cdb, 
1167                                        csio->cdb_io.cdb_ptr,
1168                                        hscb->cdb_len);
1169                         }
1170                 } else {
1171                         if (hscb->cdb_len > 12) {
1172                                 memcpy(hscb->cdb32, csio->cdb_io.cdb_bytes,
1173                                        hscb->cdb_len);
1174                                 scb->flags |= SCB_CDB32_PTR;
1175                         } else {
1176                                 memcpy(hscb->shared_data.cdb,
1177                                        csio->cdb_io.cdb_bytes,
1178                                        hscb->cdb_len);
1179                         }
1180                 }
1181         }
1182                 
1183         error = bus_dmamap_load_ccb(ahc->buffer_dmat,
1184                                     scb->dmamap,
1185                                     (union ccb *)csio,
1186                                     ahc_execute_scb,
1187                                     scb,
1188                                     0);
1189         if (error == EINPROGRESS) {
1190                 /*
1191                  * So as to maintain ordering,
1192                  * freeze the controller queue
1193                  * until our mapping is
1194                  * returned.
1195                  */
1196                 xpt_freeze_simq(sim, /*count*/1);
1197                 scb->io_ctx->ccb_h.status |= CAM_RELEASE_SIMQ;
1198         }
1199 }
1200
1201 static void
1202 ahc_abort_ccb(struct ahc_softc *ahc, struct cam_sim *sim, union ccb *ccb)
1203 {
1204         union ccb *abort_ccb;
1205
1206         abort_ccb = ccb->cab.abort_ccb;
1207         switch (abort_ccb->ccb_h.func_code) {
1208         case XPT_ACCEPT_TARGET_IO:
1209         case XPT_IMMEDIATE_NOTIFY:
1210         case XPT_CONT_TARGET_IO:
1211         {
1212                 struct ahc_tmode_tstate *tstate;
1213                 struct ahc_tmode_lstate *lstate;
1214                 struct ccb_hdr_slist *list;
1215                 cam_status status;
1216
1217                 status = ahc_find_tmode_devs(ahc, sim, abort_ccb, &tstate,
1218                                              &lstate, TRUE);
1219
1220                 if (status != CAM_REQ_CMP) {
1221                         ccb->ccb_h.status = status;
1222                         break;
1223                 }
1224
1225                 if (abort_ccb->ccb_h.func_code == XPT_ACCEPT_TARGET_IO)
1226                         list = &lstate->accept_tios;
1227                 else if (abort_ccb->ccb_h.func_code == XPT_IMMEDIATE_NOTIFY)
1228                         list = &lstate->immed_notifies;
1229                 else
1230                         list = NULL;
1231
1232                 if (list != NULL) {
1233                         struct ccb_hdr *curelm;
1234                         int found;
1235
1236                         curelm = SLIST_FIRST(list);
1237                         found = 0;
1238                         if (curelm == &abort_ccb->ccb_h) {
1239                                 found = 1;
1240                                 SLIST_REMOVE_HEAD(list, sim_links.sle);
1241                         } else {
1242                                 while(curelm != NULL) {
1243                                         struct ccb_hdr *nextelm;
1244
1245                                         nextelm =
1246                                             SLIST_NEXT(curelm, sim_links.sle);
1247
1248                                         if (nextelm == &abort_ccb->ccb_h) {
1249                                                 found = 1;
1250                                                 SLIST_NEXT(curelm,
1251                                                            sim_links.sle) =
1252                                                     SLIST_NEXT(nextelm,
1253                                                                sim_links.sle);
1254                                                 break;
1255                                         }
1256                                         curelm = nextelm;
1257                                 }
1258                         }
1259
1260                         if (found) {
1261                                 abort_ccb->ccb_h.status = CAM_REQ_ABORTED;
1262                                 xpt_done(abort_ccb);
1263                                 ccb->ccb_h.status = CAM_REQ_CMP;
1264                         } else {
1265                                 xpt_print_path(abort_ccb->ccb_h.path);
1266                                 printf("Not found\n");
1267                                 ccb->ccb_h.status = CAM_PATH_INVALID;
1268                         }
1269                         break;
1270                 }
1271                 /* FALLTHROUGH */
1272         }
1273         case XPT_SCSI_IO:
1274                 /* XXX Fully implement the hard ones */
1275                 ccb->ccb_h.status = CAM_UA_ABORT;
1276                 break;
1277         default:
1278                 ccb->ccb_h.status = CAM_REQ_INVALID;
1279                 break;
1280         }
1281         xpt_done(ccb);
1282 }
1283
1284 void
1285 ahc_send_async(struct ahc_softc *ahc, char channel, u_int target,
1286                 u_int lun, ac_code code, void *opt_arg)
1287 {
1288         struct  ccb_trans_settings cts;
1289         struct cam_path *path;
1290         void *arg;
1291         int error;
1292
1293         arg = NULL;
1294         error = ahc_create_path(ahc, channel, target, lun, &path);
1295
1296         if (error != CAM_REQ_CMP)
1297                 return;
1298
1299         switch (code) {
1300         case AC_TRANSFER_NEG:
1301         {
1302                 struct  ccb_trans_settings_scsi *scsi;
1303         
1304                 cts.type = CTS_TYPE_CURRENT_SETTINGS;
1305                 scsi = &cts.proto_specific.scsi;
1306                 cts.ccb_h.path = path;
1307                 cts.ccb_h.target_id = target;
1308                 cts.ccb_h.target_lun = lun;
1309                 ahc_get_tran_settings(ahc, channel == 'A' ? ahc->our_id
1310                                                           : ahc->our_id_b,
1311                                       channel, &cts);
1312                 arg = &cts;
1313                 scsi->valid &= ~CTS_SCSI_VALID_TQ;
1314                 scsi->flags &= ~CTS_SCSI_FLAGS_TAG_ENB;
1315                 if (opt_arg == NULL)
1316                         break;
1317                 if (*((ahc_queue_alg *)opt_arg) == AHC_QUEUE_TAGGED)
1318                         scsi->flags |= ~CTS_SCSI_FLAGS_TAG_ENB;
1319                 scsi->valid |= CTS_SCSI_VALID_TQ;
1320                 break;
1321         }
1322         case AC_SENT_BDR:
1323         case AC_BUS_RESET:
1324                 break;
1325         default:
1326                 panic("ahc_send_async: Unexpected async event");
1327         }
1328         xpt_async(code, path, arg);
1329         xpt_free_path(path);
1330 }
1331
1332 void
1333 ahc_platform_set_tags(struct ahc_softc *ahc,
1334                       struct ahc_devinfo *devinfo, int enable)
1335 {
1336 }
1337
1338 int
1339 ahc_platform_alloc(struct ahc_softc *ahc, void *platform_arg)
1340 {
1341         ahc->platform_data = malloc(sizeof(struct ahc_platform_data), M_DEVBUF,
1342             M_NOWAIT | M_ZERO);
1343         if (ahc->platform_data == NULL)
1344                 return (ENOMEM);
1345         return (0);
1346 }
1347
1348 void
1349 ahc_platform_free(struct ahc_softc *ahc)
1350 {
1351         struct ahc_platform_data *pdata;
1352
1353         pdata = ahc->platform_data;
1354         if (pdata != NULL) {
1355                 if (pdata->regs != NULL)
1356                         bus_release_resource(ahc->dev_softc,
1357                                              pdata->regs_res_type,
1358                                              pdata->regs_res_id,
1359                                              pdata->regs);
1360
1361                 if (pdata->irq != NULL)
1362                         bus_release_resource(ahc->dev_softc,
1363                                              pdata->irq_res_type,
1364                                              0, pdata->irq);
1365
1366                 if (pdata->sim_b != NULL) {
1367                         xpt_async(AC_LOST_DEVICE, pdata->path_b, NULL);
1368                         xpt_free_path(pdata->path_b);
1369                         xpt_bus_deregister(cam_sim_path(pdata->sim_b));
1370                         cam_sim_free(pdata->sim_b, /*free_devq*/TRUE);
1371                 }
1372                 if (pdata->sim != NULL) {
1373                         xpt_async(AC_LOST_DEVICE, pdata->path, NULL);
1374                         xpt_free_path(pdata->path);
1375                         xpt_bus_deregister(cam_sim_path(pdata->sim));
1376                         cam_sim_free(pdata->sim, /*free_devq*/TRUE);
1377                 }
1378                 if (pdata->eh != NULL)
1379                         EVENTHANDLER_DEREGISTER(shutdown_final, pdata->eh);
1380                 free(ahc->platform_data, M_DEVBUF);
1381         }
1382 }
1383
1384 int
1385 ahc_softc_comp(struct ahc_softc *lahc, struct ahc_softc *rahc)
1386 {
1387         /* We don't sort softcs under FreeBSD so report equal always */
1388         return (0);
1389 }
1390
1391 int
1392 ahc_detach(device_t dev)
1393 {
1394         struct ahc_softc *ahc;
1395
1396         device_printf(dev, "detaching device\n");
1397         ahc = device_get_softc(dev);
1398         ahc_lock(ahc);
1399         TAILQ_REMOVE(&ahc_tailq, ahc, links);
1400         ahc_intr_enable(ahc, FALSE);
1401         bus_teardown_intr(dev, ahc->platform_data->irq, ahc->platform_data->ih);
1402         ahc_unlock(ahc);
1403         ahc_free(ahc);
1404         return (0);
1405 }
1406
1407 #if 0
1408 static void
1409 ahc_dump_targcmd(struct target_cmd *cmd)
1410 {
1411         uint8_t *byte;
1412         uint8_t *last_byte;
1413         int i;
1414
1415         byte = &cmd->initiator_channel;
1416         /* Debugging info for received commands */
1417         last_byte = &cmd[1].initiator_channel;
1418
1419         i = 0;
1420         while (byte < last_byte) {
1421                 if (i == 0)
1422                         printf("\t");
1423                 printf("%#x", *byte++);
1424                 i++;
1425                 if (i == 8) {
1426                         printf("\n");
1427                         i = 0;
1428                 } else {
1429                         printf(", ");
1430                 }
1431         }
1432 }
1433 #endif
1434
1435 static int
1436 ahc_modevent(module_t mod, int type, void *data)
1437 {
1438         /* XXX Deal with busy status on unload. */
1439         /* XXX Deal with unknown events */
1440         return 0;
1441 }
1442   
1443 static moduledata_t ahc_mod = {
1444         "ahc",
1445         ahc_modevent,
1446         NULL
1447 };
1448
1449 DECLARE_MODULE(ahc, ahc_mod, SI_SUB_DRIVERS, SI_ORDER_MIDDLE);
1450 MODULE_DEPEND(ahc, cam, 1, 1, 1);
1451 MODULE_VERSION(ahc, 1);