]> CyberLeo.Net >> Repos - FreeBSD/releng/9.2.git/blob - sys/dev/e1000/e1000_ich8lan.h
- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.
[FreeBSD/releng/9.2.git] / sys / dev / e1000 / e1000_ich8lan.h
1 /******************************************************************************
2
3   Copyright (c) 2001-2013, Intel Corporation 
4   All rights reserved.
5   
6   Redistribution and use in source and binary forms, with or without 
7   modification, are permitted provided that the following conditions are met:
8   
9    1. Redistributions of source code must retain the above copyright notice, 
10       this list of conditions and the following disclaimer.
11   
12    2. Redistributions in binary form must reproduce the above copyright 
13       notice, this list of conditions and the following disclaimer in the 
14       documentation and/or other materials provided with the distribution.
15   
16    3. Neither the name of the Intel Corporation nor the names of its 
17       contributors may be used to endorse or promote products derived from 
18       this software without specific prior written permission.
19   
20   THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
21   AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE 
22   IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE 
23   ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE 
24   LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR 
25   CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 
26   SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS 
27   INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN 
28   CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) 
29   ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
30   POSSIBILITY OF SUCH DAMAGE.
31
32 ******************************************************************************/
33 /*$FreeBSD$*/
34
35 #ifndef _E1000_ICH8LAN_H_
36 #define _E1000_ICH8LAN_H_
37
38 #define ICH_FLASH_GFPREG                0x0000
39 #define ICH_FLASH_HSFSTS                0x0004
40 #define ICH_FLASH_HSFCTL                0x0006
41 #define ICH_FLASH_FADDR                 0x0008
42 #define ICH_FLASH_FDATA0                0x0010
43
44 /* Requires up to 10 seconds when MNG might be accessing part. */
45 #define ICH_FLASH_READ_COMMAND_TIMEOUT  10000000
46 #define ICH_FLASH_WRITE_COMMAND_TIMEOUT 10000000
47 #define ICH_FLASH_ERASE_COMMAND_TIMEOUT 10000000
48 #define ICH_FLASH_LINEAR_ADDR_MASK      0x00FFFFFF
49 #define ICH_FLASH_CYCLE_REPEAT_COUNT    10
50
51 #define ICH_CYCLE_READ                  0
52 #define ICH_CYCLE_WRITE                 2
53 #define ICH_CYCLE_ERASE                 3
54
55 #define FLASH_GFPREG_BASE_MASK          0x1FFF
56 #define FLASH_SECTOR_ADDR_SHIFT         12
57
58 #define ICH_FLASH_SEG_SIZE_256          256
59 #define ICH_FLASH_SEG_SIZE_4K           4096
60 #define ICH_FLASH_SEG_SIZE_8K           8192
61 #define ICH_FLASH_SEG_SIZE_64K          65536
62
63 #define E1000_ICH_FWSM_RSPCIPHY         0x00000040 /* Reset PHY on PCI Reset */
64 /* FW established a valid mode */
65 #define E1000_ICH_FWSM_FW_VALID         0x00008000
66 #define E1000_ICH_FWSM_PCIM2PCI         0x01000000 /* ME PCIm-to-PCI active */
67 #define E1000_ICH_FWSM_PCIM2PCI_COUNT   2000
68
69 #define E1000_ICH_MNG_IAMT_MODE         0x2
70
71 #define E1000_FWSM_WLOCK_MAC_MASK       0x0380
72 #define E1000_FWSM_WLOCK_MAC_SHIFT      7
73
74 /* Shared Receive Address Registers */
75 #define E1000_SHRAL_PCH_LPT(_i)         (0x05408 + ((_i) * 8))
76 #define E1000_SHRAH_PCH_LPT(_i)         (0x0540C + ((_i) * 8))
77
78 #define ID_LED_DEFAULT_ICH8LAN  ((ID_LED_DEF1_DEF2 << 12) | \
79                                  (ID_LED_OFF1_OFF2 <<  8) | \
80                                  (ID_LED_OFF1_ON2  <<  4) | \
81                                  (ID_LED_DEF1_DEF2))
82
83 #define E1000_ICH_NVM_SIG_WORD          0x13
84 #define E1000_ICH_NVM_SIG_MASK          0xC000
85 #define E1000_ICH_NVM_VALID_SIG_MASK    0xC0
86 #define E1000_ICH_NVM_SIG_VALUE         0x80
87
88 #define E1000_ICH8_LAN_INIT_TIMEOUT     1500
89
90 #define E1000_FEXTNVM_SW_CONFIG         1
91 #define E1000_FEXTNVM_SW_CONFIG_ICH8M   (1 << 27) /* Bit redefined for ICH8M */
92
93 #define E1000_FEXTNVM3_PHY_CFG_COUNTER_MASK     0x0C000000
94 #define E1000_FEXTNVM3_PHY_CFG_COUNTER_50MSEC   0x08000000
95
96 #define E1000_FEXTNVM4_BEACON_DURATION_MASK     0x7
97 #define E1000_FEXTNVM4_BEACON_DURATION_8USEC    0x7
98 #define E1000_FEXTNVM4_BEACON_DURATION_16USEC   0x3
99
100 #define E1000_FEXTNVM6_REQ_PLL_CLK      0x00000100
101
102 #define PCIE_ICH8_SNOOP_ALL     PCIE_NO_SNOOP_ALL
103
104 #define E1000_ICH_RAR_ENTRIES   7
105 #define E1000_PCH2_RAR_ENTRIES  5 /* RAR[0], SHRA[0-3] */
106 #define E1000_PCH_LPT_RAR_ENTRIES       12 /* RAR[0], SHRA[0-10] */
107
108 #define PHY_PAGE_SHIFT          5
109 #define PHY_REG(page, reg)      (((page) << PHY_PAGE_SHIFT) | \
110                                  ((reg) & MAX_PHY_REG_ADDRESS))
111 #define IGP3_KMRN_DIAG          PHY_REG(770, 19) /* KMRN Diagnostic */
112 #define IGP3_VR_CTRL            PHY_REG(776, 18) /* Voltage Regulator Control */
113
114 #define IGP3_KMRN_DIAG_PCS_LOCK_LOSS            0x0002
115 #define IGP3_VR_CTRL_DEV_POWERDOWN_MODE_MASK    0x0300
116 #define IGP3_VR_CTRL_MODE_SHUTDOWN              0x0200
117
118 /* PHY Wakeup Registers and defines */
119 #define BM_PORT_GEN_CFG         PHY_REG(BM_PORT_CTRL_PAGE, 17)
120 #define BM_RCTL                 PHY_REG(BM_WUC_PAGE, 0)
121 #define BM_WUC                  PHY_REG(BM_WUC_PAGE, 1)
122 #define BM_WUFC                 PHY_REG(BM_WUC_PAGE, 2)
123 #define BM_WUS                  PHY_REG(BM_WUC_PAGE, 3)
124 #define BM_RAR_L(_i)            (BM_PHY_REG(BM_WUC_PAGE, 16 + ((_i) << 2)))
125 #define BM_RAR_M(_i)            (BM_PHY_REG(BM_WUC_PAGE, 17 + ((_i) << 2)))
126 #define BM_RAR_H(_i)            (BM_PHY_REG(BM_WUC_PAGE, 18 + ((_i) << 2)))
127 #define BM_RAR_CTRL(_i)         (BM_PHY_REG(BM_WUC_PAGE, 19 + ((_i) << 2)))
128 #define BM_MTA(_i)              (BM_PHY_REG(BM_WUC_PAGE, 128 + ((_i) << 1)))
129
130 #define BM_RCTL_UPE             0x0001 /* Unicast Promiscuous Mode */
131 #define BM_RCTL_MPE             0x0002 /* Multicast Promiscuous Mode */
132 #define BM_RCTL_MO_SHIFT        3      /* Multicast Offset Shift */
133 #define BM_RCTL_MO_MASK         (3 << 3) /* Multicast Offset Mask */
134 #define BM_RCTL_BAM             0x0020 /* Broadcast Accept Mode */
135 #define BM_RCTL_PMCF            0x0040 /* Pass MAC Control Frames */
136 #define BM_RCTL_RFCE            0x0080 /* Rx Flow Control Enable */
137
138 #define HV_LED_CONFIG           PHY_REG(768, 30) /* LED Configuration */
139 #define HV_MUX_DATA_CTRL        PHY_REG(776, 16)
140 #define HV_MUX_DATA_CTRL_GEN_TO_MAC     0x0400
141 #define HV_MUX_DATA_CTRL_FORCE_SPEED    0x0004
142 #define HV_STATS_PAGE   778
143 #define HV_SCC_UPPER    PHY_REG(HV_STATS_PAGE, 16) /* Single Collision Count */
144 #define HV_SCC_LOWER    PHY_REG(HV_STATS_PAGE, 17)
145 #define HV_ECOL_UPPER   PHY_REG(HV_STATS_PAGE, 18) /* Excessive Coll. Count */
146 #define HV_ECOL_LOWER   PHY_REG(HV_STATS_PAGE, 19)
147 #define HV_MCC_UPPER    PHY_REG(HV_STATS_PAGE, 20) /* Multiple Coll. Count */
148 #define HV_MCC_LOWER    PHY_REG(HV_STATS_PAGE, 21)
149 #define HV_LATECOL_UPPER PHY_REG(HV_STATS_PAGE, 23) /* Late Collision Count */
150 #define HV_LATECOL_LOWER PHY_REG(HV_STATS_PAGE, 24)
151 #define HV_COLC_UPPER   PHY_REG(HV_STATS_PAGE, 25) /* Collision Count */
152 #define HV_COLC_LOWER   PHY_REG(HV_STATS_PAGE, 26)
153 #define HV_DC_UPPER     PHY_REG(HV_STATS_PAGE, 27) /* Defer Count */
154 #define HV_DC_LOWER     PHY_REG(HV_STATS_PAGE, 28)
155 #define HV_TNCRS_UPPER  PHY_REG(HV_STATS_PAGE, 29) /* Transmit with no CRS */
156 #define HV_TNCRS_LOWER  PHY_REG(HV_STATS_PAGE, 30)
157
158 #define E1000_FCRTV_PCH 0x05F40 /* PCH Flow Control Refresh Timer Value */
159
160 #define E1000_NVM_K1_CONFIG     0x1B /* NVM K1 Config Word */
161 #define E1000_NVM_K1_ENABLE     0x1  /* NVM Enable K1 bit */
162
163 /* SMBus Control Phy Register */
164 #define CV_SMB_CTRL             PHY_REG(769, 23)
165 #define CV_SMB_CTRL_FORCE_SMBUS 0x0001
166
167 /* SMBus Address Phy Register */
168 #define HV_SMB_ADDR             PHY_REG(768, 26)
169 #define HV_SMB_ADDR_MASK        0x007F
170 #define HV_SMB_ADDR_PEC_EN      0x0200
171 #define HV_SMB_ADDR_VALID       0x0080
172 #define HV_SMB_ADDR_FREQ_MASK           0x1100
173 #define HV_SMB_ADDR_FREQ_LOW_SHIFT      8
174 #define HV_SMB_ADDR_FREQ_HIGH_SHIFT     12
175
176 /* Strapping Option Register - RO */
177 #define E1000_STRAP                     0x0000C
178 #define E1000_STRAP_SMBUS_ADDRESS_MASK  0x00FE0000
179 #define E1000_STRAP_SMBUS_ADDRESS_SHIFT 17
180 #define E1000_STRAP_SMT_FREQ_MASK       0x00003000
181 #define E1000_STRAP_SMT_FREQ_SHIFT      12
182
183 /* OEM Bits Phy Register */
184 #define HV_OEM_BITS             PHY_REG(768, 25)
185 #define HV_OEM_BITS_LPLU        0x0004 /* Low Power Link Up */
186 #define HV_OEM_BITS_GBE_DIS     0x0040 /* Gigabit Disable */
187 #define HV_OEM_BITS_RESTART_AN  0x0400 /* Restart Auto-negotiation */
188
189 /* KMRN Mode Control */
190 #define HV_KMRN_MODE_CTRL       PHY_REG(769, 16)
191 #define HV_KMRN_MDIO_SLOW       0x0400
192
193 /* KMRN FIFO Control and Status */
194 #define HV_KMRN_FIFO_CTRLSTA                    PHY_REG(770, 16)
195 #define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_MASK      0x7000
196 #define HV_KMRN_FIFO_CTRLSTA_PREAMBLE_SHIFT     12
197
198 /* PHY Power Management Control */
199 #define HV_PM_CTRL              PHY_REG(770, 17)
200 #define HV_PM_CTRL_PLL_STOP_IN_K1_GIGA  0x100
201
202 #define SW_FLAG_TIMEOUT         1000 /* SW Semaphore flag timeout in ms */
203
204 /* PHY Low Power Idle Control */
205 #define I82579_LPI_CTRL                         PHY_REG(772, 20)
206 #define I82579_LPI_CTRL_100_ENABLE              0x2000
207 #define I82579_LPI_CTRL_1000_ENABLE             0x4000
208 #define I82579_LPI_CTRL_ENABLE_MASK             0x6000
209 #define I82579_LPI_CTRL_FORCE_PLL_LOCK_COUNT    0x80
210
211 /* Extended Management Interface (EMI) Registers */
212 #define I82579_EMI_ADDR         0x10
213 #define I82579_EMI_DATA         0x11
214 #define I82579_LPI_UPDATE_TIMER 0x4805 /* in 40ns units + 40 ns base value */
215 #define I82579_MSE_THRESHOLD    0x084F /* 82579 Mean Square Error Threshold */
216 #define I82577_MSE_THRESHOLD    0x0887 /* 82577 Mean Square Error Threshold */
217 #define I82579_MSE_LINK_DOWN    0x2411 /* MSE count before dropping link */
218 #define I82579_RX_CONFIG                0x3412 /* Receive configuration */
219 #define I82579_EEE_PCS_STATUS           0x182D  /* IEEE MMD Register 3.1 >> 8 */
220 #define I82579_EEE_CAPABILITY           0x0410 /* IEEE MMD Register 3.20 */
221 #define I82579_EEE_ADVERTISEMENT        0x040E /* IEEE MMD Register 7.60 */
222 #define I82579_EEE_LP_ABILITY           0x040F /* IEEE MMD Register 7.61 */
223 #define I82579_EEE_100_SUPPORTED        (1 << 1) /* 100BaseTx EEE supported */
224 #define I82579_EEE_1000_SUPPORTED       (1 << 2) /* 1000BaseTx EEE supported */
225 #define I217_EEE_PCS_STATUS     0x9401   /* IEEE MMD Register 3.1 */
226 #define I217_EEE_CAPABILITY     0x8000   /* IEEE MMD Register 3.20 */
227 #define I217_EEE_ADVERTISEMENT  0x8001   /* IEEE MMD Register 7.60 */
228 #define I217_EEE_LP_ABILITY     0x8002   /* IEEE MMD Register 7.61 */
229
230 #define E1000_EEE_RX_LPI_RCVD   0x0400  /* Tx LP idle received */
231 #define E1000_EEE_TX_LPI_RCVD   0x0800  /* Rx LP idle received */
232
233 /* Intel Rapid Start Technology Support */
234 #define I217_PROXY_CTRL         BM_PHY_REG(BM_WUC_PAGE, 70)
235 #define I217_PROXY_CTRL_AUTO_DISABLE    0x0080
236 #define I217_SxCTRL                     PHY_REG(BM_PORT_CTRL_PAGE, 28)
237 #define I217_SxCTRL_ENABLE_LPI_RESET    0x1000
238 #define I217_CGFREG                     PHY_REG(772, 29)
239 #define I217_CGFREG_ENABLE_MTA_RESET    0x0002
240 #define I217_MEMPWR                     PHY_REG(772, 26)
241 #define I217_MEMPWR_DISABLE_SMB_RELEASE 0x0010
242
243 /* Receive Address Initial CRC Calculation */
244 #define E1000_PCH_RAICC(_n)     (0x05F50 + ((_n) * 4))
245
246 /* Latency Tolerance Reporting */
247 #define E1000_LTRV                      0x000F8
248 #define E1000_LTRV_VALUE_MASK           0x000003FF
249 #define E1000_LTRV_SCALE_MAX            5
250 #define E1000_LTRV_SCALE_FACTOR         5
251 #define E1000_LTRV_SCALE_SHIFT          10
252 #define E1000_LTRV_SCALE_MASK           0x00001C00
253 #define E1000_LTRV_REQ_SHIFT            15
254 #define E1000_LTRV_NOSNOOP_SHIFT        16
255 #define E1000_LTRV_SEND                 (1 << 30)
256
257 /* Proprietary Latency Tolerance Reporting PCI Capability */
258 #define E1000_PCI_LTR_CAP_LPT           0xA8
259
260 /* OBFF Control & Threshold Defines */
261 #define E1000_SVCR_OFF_EN               0x00000001
262 #define E1000_SVCR_OFF_MASKINT          0x00001000
263 #define E1000_SVCR_OFF_TIMER_MASK       0xFFFF0000
264 #define E1000_SVCR_OFF_TIMER_SHIFT      16
265 #define E1000_SVT_OFF_HWM_MASK          0x0000001F
266
267 void e1000_set_kmrn_lock_loss_workaround_ich8lan(struct e1000_hw *hw,
268                                                  bool state);
269 void e1000_igp3_phy_powerdown_workaround_ich8lan(struct e1000_hw *hw);
270 void e1000_gig_downshift_workaround_ich8lan(struct e1000_hw *hw);
271 void e1000_suspend_workarounds_ich8lan(struct e1000_hw *hw);
272 void e1000_resume_workarounds_pchlan(struct e1000_hw *hw);
273 s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable);
274 void e1000_copy_rx_addrs_to_phy_ich8lan(struct e1000_hw *hw);
275 s32 e1000_lv_jumbo_workaround_ich8lan(struct e1000_hw *hw, bool enable);
276 s32 e1000_read_emi_reg_locked(struct e1000_hw *hw, u16 addr, u16 *data);
277 #endif /* _E1000_ICH8LAN_H_ */