- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.

[FreeBSD/releng/9.2.git] / sys / dev / re / if_re.c

/*-
 * Copyright (c) 1997, 1998-2003
 *      Bill Paul <wpaul@windriver.com>.  All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. All advertising materials mentioning features or use of this software
 *    must display the following acknowledgement:
 *      This product includes software developed by Bill Paul.
 * 4. Neither the name of the author nor the names of any co-contributors
 *    may be used to endorse or promote products derived from this software
 *    without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
 * ARE DISCLAIMED.  IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
 * THE POSSIBILITY OF SUCH DAMAGE.
 */

#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");

/*
 * RealTek 8139C+/8169/8169S/8110S/8168/8111/8101E PCI NIC driver
 *
 * Written by Bill Paul <wpaul@windriver.com>
 * Senior Networking Software Engineer
 * Wind River Systems
 */

/*
 * This driver is designed to support RealTek's next generation of
 * 10/100 and 10/100/1000 PCI ethernet controllers. There are currently
 * seven devices in this family: the RTL8139C+, the RTL8169, the RTL8169S,
 * RTL8110S, the RTL8168, the RTL8111 and the RTL8101E.
 *
 * The 8139C+ is a 10/100 ethernet chip. It is backwards compatible
 * with the older 8139 family, however it also supports a special
 * C+ mode of operation that provides several new performance enhancing
 * features. These include:
 *
 *      o Descriptor based DMA mechanism. Each descriptor represents
 *        a single packet fragment. Data buffers may be aligned on
 *        any byte boundary.
 *
 *      o 64-bit DMA
 *
 *      o TCP/IP checksum offload for both RX and TX
 *
 *      o High and normal priority transmit DMA rings
 *
 *      o VLAN tag insertion and extraction
 *
 *      o TCP large send (segmentation offload)
 *
 * Like the 8139, the 8139C+ also has a built-in 10/100 PHY. The C+
 * programming API is fairly straightforward. The RX filtering, EEPROM
 * access and PHY access is the same as it is on the older 8139 series
 * chips.
 *
 * The 8169 is a 64-bit 10/100/1000 gigabit ethernet MAC. It has almost the
 * same programming API and feature set as the 8139C+ with the following
 * differences and additions:
 *
 *      o 1000Mbps mode
 *
 *      o Jumbo frames
 *
 *      o GMII and TBI ports/registers for interfacing with copper
 *        or fiber PHYs
 *
 *      o RX and TX DMA rings can have up to 1024 descriptors
 *        (the 8139C+ allows a maximum of 64)
 *
 *      o Slight differences in register layout from the 8139C+
 *
 * The TX start and timer interrupt registers are at different locations
 * on the 8169 than they are on the 8139C+. Also, the status word in the
 * RX descriptor has a slightly different bit layout. The 8169 does not
 * have a built-in PHY. Most reference boards use a Marvell 88E1000 'Alaska'
 * copper gigE PHY.
 *
 * The 8169S/8110S 10/100/1000 devices have built-in copper gigE PHYs
 * (the 'S' stands for 'single-chip'). These devices have the same
 * programming API as the older 8169, but also have some vendor-specific
 * registers for the on-board PHY. The 8110S is a LAN-on-motherboard
 * part designed to be pin-compatible with the RealTek 8100 10/100 chip.
 *
 * This driver takes advantage of the RX and TX checksum offload and
 * VLAN tag insertion/extraction features. It also implements TX
 * interrupt moderation using the timer interrupt registers, which
 * significantly reduces TX interrupt load. There is also support
 * for jumbo frames, however the 8169/8169S/8110S can not transmit
 * jumbo frames larger than 7440, so the max MTU possible with this
 * driver is 7422 bytes.
 */

#ifdef HAVE_KERNEL_OPTION_HEADERS
#include "opt_device_polling.h"
#endif

#include <sys/param.h>
#include <sys/endian.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
#include <sys/taskqueue.h>

#include <net/if.h>
#include <net/if_arp.h>
#include <net/ethernet.h>
#include <net/if_dl.h>
#include <net/if_media.h>
#include <net/if_types.h>
#include <net/if_vlan_var.h>

#include <net/bpf.h>

#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/bus.h>
#include <sys/rman.h>

#include <dev/mii/mii.h>
#include <dev/mii/miivar.h>

#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>

#include <pci/if_rlreg.h>

MODULE_DEPEND(re, pci, 1, 1, 1);
MODULE_DEPEND(re, ether, 1, 1, 1);
MODULE_DEPEND(re, miibus, 1, 1, 1);

/* "device miibus" required.  See GENERIC if you get errors here. */
#include "miibus_if.h"

/* Tunables. */
static int intr_filter = 0;
TUNABLE_INT("hw.re.intr_filter", &intr_filter);
static int msi_disable = 0;
TUNABLE_INT("hw.re.msi_disable", &msi_disable);
static int msix_disable = 0;
TUNABLE_INT("hw.re.msix_disable", &msix_disable);
static int prefer_iomap = 0;
TUNABLE_INT("hw.re.prefer_iomap", &prefer_iomap);

#define RE_CSUM_FEATURES    (CSUM_IP | CSUM_TCP | CSUM_UDP)

/*
 * Various supported device vendors/types and their names.
 */
static const struct rl_type re_devs[] = {
        { DLINK_VENDORID, DLINK_DEVICEID_528T, 0,
            "D-Link DGE-528(T) Gigabit Ethernet Adapter" },
        { DLINK_VENDORID, DLINK_DEVICEID_530T_REVC, 0,
            "D-Link DGE-530(T) Gigabit Ethernet Adapter" },
        { RT_VENDORID, RT_DEVICEID_8139, 0,
            "RealTek 8139C+ 10/100BaseTX" },
        { RT_VENDORID, RT_DEVICEID_8101E, 0,
            "RealTek 810xE PCIe 10/100baseTX" },
        { RT_VENDORID, RT_DEVICEID_8168, 0,
            "RealTek 8168/8111 B/C/CP/D/DP/E/F PCIe Gigabit Ethernet" },
        { RT_VENDORID, RT_DEVICEID_8169, 0,
            "RealTek 8169/8169S/8169SB(L)/8110S/8110SB(L) Gigabit Ethernet" },
        { RT_VENDORID, RT_DEVICEID_8169SC, 0,
            "RealTek 8169SC/8110SC Single-chip Gigabit Ethernet" },
        { COREGA_VENDORID, COREGA_DEVICEID_CGLAPCIGT, 0,
            "Corega CG-LAPCIGT (RTL8169S) Gigabit Ethernet" },
        { LINKSYS_VENDORID, LINKSYS_DEVICEID_EG1032, 0,
            "Linksys EG1032 (RTL8169S) Gigabit Ethernet" },
        { USR_VENDORID, USR_DEVICEID_997902, 0,
            "US Robotics 997902 (RTL8169S) Gigabit Ethernet" }
};

static const struct rl_hwrev re_hwrevs[] = {
        { RL_HWREV_8139, RL_8139, "", RL_MTU },
        { RL_HWREV_8139A, RL_8139, "A", RL_MTU },
        { RL_HWREV_8139AG, RL_8139, "A-G", RL_MTU },
        { RL_HWREV_8139B, RL_8139, "B", RL_MTU },
        { RL_HWREV_8130, RL_8139, "8130", RL_MTU },
        { RL_HWREV_8139C, RL_8139, "C", RL_MTU },
        { RL_HWREV_8139D, RL_8139, "8139D/8100B/8100C", RL_MTU },
        { RL_HWREV_8139CPLUS, RL_8139CPLUS, "C+", RL_MTU },
        { RL_HWREV_8168B_SPIN1, RL_8169, "8168", RL_JUMBO_MTU },
        { RL_HWREV_8169, RL_8169, "8169", RL_JUMBO_MTU },
        { RL_HWREV_8169S, RL_8169, "8169S", RL_JUMBO_MTU },
        { RL_HWREV_8110S, RL_8169, "8110S", RL_JUMBO_MTU },
        { RL_HWREV_8169_8110SB, RL_8169, "8169SB/8110SB", RL_JUMBO_MTU },
        { RL_HWREV_8169_8110SC, RL_8169, "8169SC/8110SC", RL_JUMBO_MTU },
        { RL_HWREV_8169_8110SBL, RL_8169, "8169SBL/8110SBL", RL_JUMBO_MTU },
        { RL_HWREV_8169_8110SCE, RL_8169, "8169SC/8110SC", RL_JUMBO_MTU },
        { RL_HWREV_8100, RL_8139, "8100", RL_MTU },
        { RL_HWREV_8101, RL_8139, "8101", RL_MTU },
        { RL_HWREV_8100E, RL_8169, "8100E", RL_MTU },
        { RL_HWREV_8101E, RL_8169, "8101E", RL_MTU },
        { RL_HWREV_8102E, RL_8169, "8102E", RL_MTU },
        { RL_HWREV_8102EL, RL_8169, "8102EL", RL_MTU },
        { RL_HWREV_8102EL_SPIN1, RL_8169, "8102EL", RL_MTU },
        { RL_HWREV_8103E, RL_8169, "8103E", RL_MTU },
        { RL_HWREV_8401E, RL_8169, "8401E", RL_MTU },
        { RL_HWREV_8402, RL_8169, "8402", RL_MTU },
        { RL_HWREV_8105E, RL_8169, "8105E", RL_MTU },
        { RL_HWREV_8105E_SPIN1, RL_8169, "8105E", RL_MTU },
        { RL_HWREV_8168B_SPIN2, RL_8169, "8168", RL_JUMBO_MTU },
        { RL_HWREV_8168B_SPIN3, RL_8169, "8168", RL_JUMBO_MTU },
        { RL_HWREV_8168C, RL_8169, "8168C/8111C", RL_JUMBO_MTU_6K },
        { RL_HWREV_8168C_SPIN2, RL_8169, "8168C/8111C", RL_JUMBO_MTU_6K },
        { RL_HWREV_8168CP, RL_8169, "8168CP/8111CP", RL_JUMBO_MTU_6K },
        { RL_HWREV_8168D, RL_8169, "8168D/8111D", RL_JUMBO_MTU_9K },
        { RL_HWREV_8168DP, RL_8169, "8168DP/8111DP", RL_JUMBO_MTU_9K },
        { RL_HWREV_8168E, RL_8169, "8168E/8111E", RL_JUMBO_MTU_9K},
        { RL_HWREV_8168E_VL, RL_8169, "8168E/8111E-VL", RL_JUMBO_MTU_6K},
        { RL_HWREV_8168F, RL_8169, "8168F/8111F", RL_JUMBO_MTU_9K},
        { RL_HWREV_8411, RL_8169, "8411", RL_JUMBO_MTU_9K},
        { 0, 0, NULL, 0 }
};

static int re_probe             (device_t);
static int re_attach            (device_t);
static int re_detach            (device_t);

static int re_encap             (struct rl_softc *, struct mbuf **);

static void re_dma_map_addr     (void *, bus_dma_segment_t *, int, int);
static int re_allocmem          (device_t, struct rl_softc *);
static __inline void re_discard_rxbuf
                                (struct rl_softc *, int);
static int re_newbuf            (struct rl_softc *, int);
static int re_jumbo_newbuf      (struct rl_softc *, int);
static int re_rx_list_init      (struct rl_softc *);
static int re_jrx_list_init     (struct rl_softc *);
static int re_tx_list_init      (struct rl_softc *);
#ifdef RE_FIXUP_RX
static __inline void re_fixup_rx
                                (struct mbuf *);
#endif
static int re_rxeof             (struct rl_softc *, int *);
static void re_txeof            (struct rl_softc *);
#ifdef DEVICE_POLLING
static int re_poll              (struct ifnet *, enum poll_cmd, int);
static int re_poll_locked       (struct ifnet *, enum poll_cmd, int);
#endif
static int re_intr              (void *);
static void re_intr_msi         (void *);
static void re_tick             (void *);
static void re_int_task         (void *, int);
static void re_start            (struct ifnet *);
static void re_start_locked     (struct ifnet *);
static int re_ioctl             (struct ifnet *, u_long, caddr_t);
static void re_init             (void *);
static void re_init_locked      (struct rl_softc *);
static void re_stop             (struct rl_softc *);
static void re_watchdog         (struct rl_softc *);
static int re_suspend           (device_t);
static int re_resume            (device_t);
static int re_shutdown          (device_t);
static int re_ifmedia_upd       (struct ifnet *);
static void re_ifmedia_sts      (struct ifnet *, struct ifmediareq *);

static void re_eeprom_putbyte   (struct rl_softc *, int);
static void re_eeprom_getword   (struct rl_softc *, int, u_int16_t *);
static void re_read_eeprom      (struct rl_softc *, caddr_t, int, int);
static int re_gmii_readreg      (device_t, int, int);
static int re_gmii_writereg     (device_t, int, int, int);

static int re_miibus_readreg    (device_t, int, int);
static int re_miibus_writereg   (device_t, int, int, int);
static void re_miibus_statchg   (device_t);

static void re_set_jumbo        (struct rl_softc *, int);
static void re_set_rxmode               (struct rl_softc *);
static void re_reset            (struct rl_softc *);
static void re_setwol           (struct rl_softc *);
static void re_clrwol           (struct rl_softc *);
static void re_set_linkspeed    (struct rl_softc *);

#ifdef DEV_NETMAP       /* see ixgbe.c for details */
#include <dev/netmap/if_re_netmap.h>
#endif /* !DEV_NETMAP */

#ifdef RE_DIAG
static int re_diag              (struct rl_softc *);
#endif

static void re_add_sysctls      (struct rl_softc *);
static int re_sysctl_stats      (SYSCTL_HANDLER_ARGS);
static int sysctl_int_range     (SYSCTL_HANDLER_ARGS, int, int);
static int sysctl_hw_re_int_mod (SYSCTL_HANDLER_ARGS);

static device_method_t re_methods[] = {
        /* Device interface */
        DEVMETHOD(device_probe,         re_probe),
        DEVMETHOD(device_attach,        re_attach),
        DEVMETHOD(device_detach,        re_detach),
        DEVMETHOD(device_suspend,       re_suspend),
        DEVMETHOD(device_resume,        re_resume),
        DEVMETHOD(device_shutdown,      re_shutdown),

        /* MII interface */
        DEVMETHOD(miibus_readreg,       re_miibus_readreg),
        DEVMETHOD(miibus_writereg,      re_miibus_writereg),
        DEVMETHOD(miibus_statchg,       re_miibus_statchg),

        DEVMETHOD_END
};

static driver_t re_driver = {
        "re",
        re_methods,
        sizeof(struct rl_softc)
};

static devclass_t re_devclass;

DRIVER_MODULE(re, pci, re_driver, re_devclass, 0, 0);
DRIVER_MODULE(miibus, re, miibus_driver, miibus_devclass, 0, 0);

#define EE_SET(x)                                       \
        CSR_WRITE_1(sc, RL_EECMD,                       \
                CSR_READ_1(sc, RL_EECMD) | x)

#define EE_CLR(x)                                       \
        CSR_WRITE_1(sc, RL_EECMD,                       \
                CSR_READ_1(sc, RL_EECMD) & ~x)

/*
 * Send a read command and address to the EEPROM, check for ACK.
 */
static void
re_eeprom_putbyte(struct rl_softc *sc, int addr)
{
        int                     d, i;

        d = addr | (RL_9346_READ << sc->rl_eewidth);

        /*
         * Feed in each bit and strobe the clock.
         */

        for (i = 1 << (sc->rl_eewidth + 3); i; i >>= 1) {
                if (d & i) {
                        EE_SET(RL_EE_DATAIN);
                } else {
                        EE_CLR(RL_EE_DATAIN);
                }
                DELAY(100);
                EE_SET(RL_EE_CLK);
                DELAY(150);
                EE_CLR(RL_EE_CLK);
                DELAY(100);
        }
}

/*
 * Read a word of data stored in the EEPROM at address 'addr.'
 */
static void
re_eeprom_getword(struct rl_softc *sc, int addr, u_int16_t *dest)
{
        int                     i;
        u_int16_t               word = 0;

        /*
         * Send address of word we want to read.
         */
        re_eeprom_putbyte(sc, addr);

        /*
         * Start reading bits from EEPROM.
         */
        for (i = 0x8000; i; i >>= 1) {
                EE_SET(RL_EE_CLK);
                DELAY(100);
                if (CSR_READ_1(sc, RL_EECMD) & RL_EE_DATAOUT)
                        word |= i;
                EE_CLR(RL_EE_CLK);
                DELAY(100);
        }

        *dest = word;
}

/*
 * Read a sequence of words from the EEPROM.
 */
static void
re_read_eeprom(struct rl_softc *sc, caddr_t dest, int off, int cnt)
{
        int                     i;
        u_int16_t               word = 0, *ptr;

        CSR_SETBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM);

        DELAY(100);

        for (i = 0; i < cnt; i++) {
                CSR_SETBIT_1(sc, RL_EECMD, RL_EE_SEL);
                re_eeprom_getword(sc, off + i, &word);
                CSR_CLRBIT_1(sc, RL_EECMD, RL_EE_SEL);
                ptr = (u_int16_t *)(dest + (i * 2));
                *ptr = word;
        }

        CSR_CLRBIT_1(sc, RL_EECMD, RL_EEMODE_PROGRAM);
}

static int
re_gmii_readreg(device_t dev, int phy, int reg)
{
        struct rl_softc         *sc;
        u_int32_t               rval;
        int                     i;

        sc = device_get_softc(dev);

        /* Let the rgephy driver read the GMEDIASTAT register */

        if (reg == RL_GMEDIASTAT) {
                rval = CSR_READ_1(sc, RL_GMEDIASTAT);
                return (rval);
        }

        CSR_WRITE_4(sc, RL_PHYAR, reg << 16);

        for (i = 0; i < RL_PHY_TIMEOUT; i++) {
                rval = CSR_READ_4(sc, RL_PHYAR);
                if (rval & RL_PHYAR_BUSY)
                        break;
                DELAY(25);
        }

        if (i == RL_PHY_TIMEOUT) {
                device_printf(sc->rl_dev, "PHY read failed\n");
                return (0);
        }

        /*
         * Controller requires a 20us delay to process next MDIO request.
         */
        DELAY(20);

        return (rval & RL_PHYAR_PHYDATA);
}

static int
re_gmii_writereg(device_t dev, int phy, int reg, int data)
{
        struct rl_softc         *sc;
        u_int32_t               rval;
        int                     i;

        sc = device_get_softc(dev);

        CSR_WRITE_4(sc, RL_PHYAR, (reg << 16) |
            (data & RL_PHYAR_PHYDATA) | RL_PHYAR_BUSY);

        for (i = 0; i < RL_PHY_TIMEOUT; i++) {
                rval = CSR_READ_4(sc, RL_PHYAR);
                if (!(rval & RL_PHYAR_BUSY))
                        break;
                DELAY(25);
        }

        if (i == RL_PHY_TIMEOUT) {
                device_printf(sc->rl_dev, "PHY write failed\n");
                return (0);
        }

        /*
         * Controller requires a 20us delay to process next MDIO request.
         */
        DELAY(20);

        return (0);
}

static int
re_miibus_readreg(device_t dev, int phy, int reg)
{
        struct rl_softc         *sc;
        u_int16_t               rval = 0;
        u_int16_t               re8139_reg = 0;

        sc = device_get_softc(dev);

        if (sc->rl_type == RL_8169) {
                rval = re_gmii_readreg(dev, phy, reg);
                return (rval);
        }

        switch (reg) {
        case MII_BMCR:
                re8139_reg = RL_BMCR;
                break;
        case MII_BMSR:
                re8139_reg = RL_BMSR;
                break;
        case MII_ANAR:
                re8139_reg = RL_ANAR;
                break;
        case MII_ANER:
                re8139_reg = RL_ANER;
                break;
        case MII_ANLPAR:
                re8139_reg = RL_LPAR;
                break;
        case MII_PHYIDR1:
        case MII_PHYIDR2:
                return (0);
        /*
         * Allow the rlphy driver to read the media status
         * register. If we have a link partner which does not
         * support NWAY, this is the register which will tell
         * us the results of parallel detection.
         */
        case RL_MEDIASTAT:
                rval = CSR_READ_1(sc, RL_MEDIASTAT);
                return (rval);
        default:
                device_printf(sc->rl_dev, "bad phy register\n");
                return (0);
        }
        rval = CSR_READ_2(sc, re8139_reg);
        if (sc->rl_type == RL_8139CPLUS && re8139_reg == RL_BMCR) {
                /* 8139C+ has different bit layout. */
                rval &= ~(BMCR_LOOP | BMCR_ISO);
        }
        return (rval);
}

static int
re_miibus_writereg(device_t dev, int phy, int reg, int data)
{
        struct rl_softc         *sc;
        u_int16_t               re8139_reg = 0;
        int                     rval = 0;

        sc = device_get_softc(dev);

        if (sc->rl_type == RL_8169) {
                rval = re_gmii_writereg(dev, phy, reg, data);
                return (rval);
        }

        switch (reg) {
        case MII_BMCR:
                re8139_reg = RL_BMCR;
                if (sc->rl_type == RL_8139CPLUS) {
                        /* 8139C+ has different bit layout. */
                        data &= ~(BMCR_LOOP | BMCR_ISO);
                }
                break;
        case MII_BMSR:
                re8139_reg = RL_BMSR;
                break;
        case MII_ANAR:
                re8139_reg = RL_ANAR;
                break;
        case MII_ANER:
                re8139_reg = RL_ANER;
                break;
        case MII_ANLPAR:
                re8139_reg = RL_LPAR;
                break;
        case MII_PHYIDR1:
        case MII_PHYIDR2:
                return (0);
                break;
        default:
                device_printf(sc->rl_dev, "bad phy register\n");
                return (0);
        }
        CSR_WRITE_2(sc, re8139_reg, data);
        return (0);
}

static void
re_miibus_statchg(device_t dev)
{
        struct rl_softc         *sc;
        struct ifnet            *ifp;
        struct mii_data         *mii;

        sc = device_get_softc(dev);
        mii = device_get_softc(sc->rl_miibus);
        ifp = sc->rl_ifp;
        if (mii == NULL || ifp == NULL ||
            (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
                return;

        sc->rl_flags &= ~RL_FLAG_LINK;
        if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
            (IFM_ACTIVE | IFM_AVALID)) {
                switch (IFM_SUBTYPE(mii->mii_media_active)) {
                case IFM_10_T:
                case IFM_100_TX:
                        sc->rl_flags |= RL_FLAG_LINK;
                        break;
                case IFM_1000_T:
                        if ((sc->rl_flags & RL_FLAG_FASTETHER) != 0)
                                break;
                        sc->rl_flags |= RL_FLAG_LINK;
                        break;
                default:
                        break;
                }
        }
        /*
         * RealTek controllers does not provide any interface to
         * Tx/Rx MACs for resolved speed, duplex and flow-control
         * parameters.
         */
}

/*
 * Set the RX configuration and 64-bit multicast hash filter.
 */
static void
re_set_rxmode(struct rl_softc *sc)
{
        struct ifnet            *ifp;
        struct ifmultiaddr      *ifma;
        uint32_t                hashes[2] = { 0, 0 };
        uint32_t                h, rxfilt;

        RL_LOCK_ASSERT(sc);

        ifp = sc->rl_ifp;

        rxfilt = RL_RXCFG_CONFIG | RL_RXCFG_RX_INDIV | RL_RXCFG_RX_BROAD;

        if (ifp->if_flags & (IFF_ALLMULTI | IFF_PROMISC)) {
                if (ifp->if_flags & IFF_PROMISC)
                        rxfilt |= RL_RXCFG_RX_ALLPHYS;
                /*
                 * Unlike other hardwares, we have to explicitly set
                 * RL_RXCFG_RX_MULTI to receive multicast frames in
                 * promiscuous mode.
                 */
                rxfilt |= RL_RXCFG_RX_MULTI;
                hashes[0] = hashes[1] = 0xffffffff;
                goto done;
        }

        if_maddr_rlock(ifp);
        TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
                if (ifma->ifma_addr->sa_family != AF_LINK)
                        continue;
                h = ether_crc32_be(LLADDR((struct sockaddr_dl *)
                    ifma->ifma_addr), ETHER_ADDR_LEN) >> 26;
                if (h < 32)
                        hashes[0] |= (1 << h);
                else
                        hashes[1] |= (1 << (h - 32));
        }
        if_maddr_runlock(ifp);

        if (hashes[0] != 0 || hashes[1] != 0) {
                /*
                 * For some unfathomable reason, RealTek decided to
                 * reverse the order of the multicast hash registers
                 * in the PCI Express parts.  This means we have to
                 * write the hash pattern in reverse order for those
                 * devices.
                 */
                if ((sc->rl_flags & RL_FLAG_PCIE) != 0) {
                        h = bswap32(hashes[0]);
                        hashes[0] = bswap32(hashes[1]);
                        hashes[1] = h;
                }
                rxfilt |= RL_RXCFG_RX_MULTI;
        }

done:
        CSR_WRITE_4(sc, RL_MAR0, hashes[0]);
        CSR_WRITE_4(sc, RL_MAR4, hashes[1]);
        CSR_WRITE_4(sc, RL_RXCFG, rxfilt);
}

static void
re_reset(struct rl_softc *sc)
{
        int                     i;

        RL_LOCK_ASSERT(sc);

        CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RESET);

        for (i = 0; i < RL_TIMEOUT; i++) {
                DELAY(10);
                if (!(CSR_READ_1(sc, RL_COMMAND) & RL_CMD_RESET))
                        break;
        }
        if (i == RL_TIMEOUT)
                device_printf(sc->rl_dev, "reset never completed!\n");

        if ((sc->rl_flags & RL_FLAG_MACRESET) != 0)
                CSR_WRITE_1(sc, 0x82, 1);
        if (sc->rl_hwrev->rl_rev == RL_HWREV_8169S)
                re_gmii_writereg(sc->rl_dev, 1, 0x0b, 0);
}

#ifdef RE_DIAG

/*
 * The following routine is designed to test for a defect on some
 * 32-bit 8169 cards. Some of these NICs have the REQ64# and ACK64#
 * lines connected to the bus, however for a 32-bit only card, they
 * should be pulled high. The result of this defect is that the
 * NIC will not work right if you plug it into a 64-bit slot: DMA
 * operations will be done with 64-bit transfers, which will fail
 * because the 64-bit data lines aren't connected.
 *
 * There's no way to work around this (short of talking a soldering
 * iron to the board), however we can detect it. The method we use
 * here is to put the NIC into digital loopback mode, set the receiver
 * to promiscuous mode, and then try to send a frame. We then compare
 * the frame data we sent to what was received. If the data matches,
 * then the NIC is working correctly, otherwise we know the user has
 * a defective NIC which has been mistakenly plugged into a 64-bit PCI
 * slot. In the latter case, there's no way the NIC can work correctly,
 * so we print out a message on the console and abort the device attach.
 */

static int
re_diag(struct rl_softc *sc)
{
        struct ifnet            *ifp = sc->rl_ifp;
        struct mbuf             *m0;
        struct ether_header     *eh;
        struct rl_desc          *cur_rx;
        u_int16_t               status;
        u_int32_t               rxstat;
        int                     total_len, i, error = 0, phyaddr;
        u_int8_t                dst[] = { 0x00, 'h', 'e', 'l', 'l', 'o' };
        u_int8_t                src[] = { 0x00, 'w', 'o', 'r', 'l', 'd' };

        /* Allocate a single mbuf */
        MGETHDR(m0, M_NOWAIT, MT_DATA);
        if (m0 == NULL)
                return (ENOBUFS);

        RL_LOCK(sc);

        /*
         * Initialize the NIC in test mode. This sets the chip up
         * so that it can send and receive frames, but performs the
         * following special functions:
         * - Puts receiver in promiscuous mode
         * - Enables digital loopback mode
         * - Leaves interrupts turned off
         */

        ifp->if_flags |= IFF_PROMISC;
        sc->rl_testmode = 1;
        ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
        re_init_locked(sc);
        sc->rl_flags |= RL_FLAG_LINK;
        if (sc->rl_type == RL_8169)
                phyaddr = 1;
        else
                phyaddr = 0;

        re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_RESET);
        for (i = 0; i < RL_TIMEOUT; i++) {
                status = re_miibus_readreg(sc->rl_dev, phyaddr, MII_BMCR);
                if (!(status & BMCR_RESET))
                        break;
        }

        re_miibus_writereg(sc->rl_dev, phyaddr, MII_BMCR, BMCR_LOOP);
        CSR_WRITE_2(sc, RL_ISR, RL_INTRS);

        DELAY(100000);

        /* Put some data in the mbuf */

        eh = mtod(m0, struct ether_header *);
        bcopy ((char *)&dst, eh->ether_dhost, ETHER_ADDR_LEN);
        bcopy ((char *)&src, eh->ether_shost, ETHER_ADDR_LEN);
        eh->ether_type = htons(ETHERTYPE_IP);
        m0->m_pkthdr.len = m0->m_len = ETHER_MIN_LEN - ETHER_CRC_LEN;

        /*
         * Queue the packet, start transmission.
         * Note: IF_HANDOFF() ultimately calls re_start() for us.
         */

        CSR_WRITE_2(sc, RL_ISR, 0xFFFF);
        RL_UNLOCK(sc);
        /* XXX: re_diag must not be called when in ALTQ mode */
        IF_HANDOFF(&ifp->if_snd, m0, ifp);
        RL_LOCK(sc);
        m0 = NULL;

        /* Wait for it to propagate through the chip */

        DELAY(100000);
        for (i = 0; i < RL_TIMEOUT; i++) {
                status = CSR_READ_2(sc, RL_ISR);
                CSR_WRITE_2(sc, RL_ISR, status);
                if ((status & (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK)) ==
                    (RL_ISR_TIMEOUT_EXPIRED|RL_ISR_RX_OK))
                        break;
                DELAY(10);
        }

        if (i == RL_TIMEOUT) {
                device_printf(sc->rl_dev,
                    "diagnostic failed, failed to receive packet in"
                    " loopback mode\n");
                error = EIO;
                goto done;
        }

        /*
         * The packet should have been dumped into the first
         * entry in the RX DMA ring. Grab it from there.
         */

        bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
            sc->rl_ldata.rl_rx_list_map,
            BUS_DMASYNC_POSTREAD);
        bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag,
            sc->rl_ldata.rl_rx_desc[0].rx_dmamap,
            BUS_DMASYNC_POSTREAD);
        bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag,
            sc->rl_ldata.rl_rx_desc[0].rx_dmamap);

        m0 = sc->rl_ldata.rl_rx_desc[0].rx_m;
        sc->rl_ldata.rl_rx_desc[0].rx_m = NULL;
        eh = mtod(m0, struct ether_header *);

        cur_rx = &sc->rl_ldata.rl_rx_list[0];
        total_len = RL_RXBYTES(cur_rx);
        rxstat = le32toh(cur_rx->rl_cmdstat);

        if (total_len != ETHER_MIN_LEN) {
                device_printf(sc->rl_dev,
                    "diagnostic failed, received short packet\n");
                error = EIO;
                goto done;
        }

        /* Test that the received packet data matches what we sent. */

        if (bcmp((char *)&eh->ether_dhost, (char *)&dst, ETHER_ADDR_LEN) ||
            bcmp((char *)&eh->ether_shost, (char *)&src, ETHER_ADDR_LEN) ||
            ntohs(eh->ether_type) != ETHERTYPE_IP) {
                device_printf(sc->rl_dev, "WARNING, DMA FAILURE!\n");
                device_printf(sc->rl_dev, "expected TX data: %6D/%6D/0x%x\n",
                    dst, ":", src, ":", ETHERTYPE_IP);
                device_printf(sc->rl_dev, "received RX data: %6D/%6D/0x%x\n",
                    eh->ether_dhost, ":", eh->ether_shost, ":",
                    ntohs(eh->ether_type));
                device_printf(sc->rl_dev, "You may have a defective 32-bit "
                    "NIC plugged into a 64-bit PCI slot.\n");
                device_printf(sc->rl_dev, "Please re-install the NIC in a "
                    "32-bit slot for proper operation.\n");
                device_printf(sc->rl_dev, "Read the re(4) man page for more "
                    "details.\n");
                error = EIO;
        }

done:
        /* Turn interface off, release resources */

        sc->rl_testmode = 0;
        sc->rl_flags &= ~RL_FLAG_LINK;
        ifp->if_flags &= ~IFF_PROMISC;
        re_stop(sc);
        if (m0 != NULL)
                m_freem(m0);

        RL_UNLOCK(sc);

        return (error);
}

#endif

/*
 * Probe for a RealTek 8139C+/8169/8110 chip. Check the PCI vendor and device
 * IDs against our list and return a device name if we find a match.
 */
static int
re_probe(device_t dev)
{
        const struct rl_type    *t;
        uint16_t                devid, vendor;
        uint16_t                revid, sdevid;
        int                     i;

        vendor = pci_get_vendor(dev);
        devid = pci_get_device(dev);
        revid = pci_get_revid(dev);
        sdevid = pci_get_subdevice(dev);

        if (vendor == LINKSYS_VENDORID && devid == LINKSYS_DEVICEID_EG1032) {
                if (sdevid != LINKSYS_SUBDEVICE_EG1032_REV3) {
                        /*
                         * Only attach to rev. 3 of the Linksys EG1032 adapter.
                         * Rev. 2 is supported by sk(4).
                         */
                        return (ENXIO);
                }
        }

        if (vendor == RT_VENDORID && devid == RT_DEVICEID_8139) {
                if (revid != 0x20) {
                        /* 8139, let rl(4) take care of this device. */
                        return (ENXIO);
                }
        }

        t = re_devs;
        for (i = 0; i < sizeof(re_devs) / sizeof(re_devs[0]); i++, t++) {
                if (vendor == t->rl_vid && devid == t->rl_did) {
                        device_set_desc(dev, t->rl_name);
                        return (BUS_PROBE_DEFAULT);
                }
        }

        return (ENXIO);
}

/*
 * Map a single buffer address.
 */

static void
re_dma_map_addr(void *arg, bus_dma_segment_t *segs, int nseg, int error)
{
        bus_addr_t              *addr;

        if (error)
                return;

        KASSERT(nseg == 1, ("too many DMA segments, %d should be 1", nseg));
        addr = arg;
        *addr = segs->ds_addr;
}

static int
re_allocmem(device_t dev, struct rl_softc *sc)
{
        bus_addr_t              lowaddr;
        bus_size_t              rx_list_size, tx_list_size;
        int                     error;
        int                     i;

        rx_list_size = sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc);
        tx_list_size = sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc);

        /*
         * Allocate the parent bus DMA tag appropriate for PCI.
         * In order to use DAC, RL_CPLUSCMD_PCI_DAC bit of RL_CPLUS_CMD
         * register should be set. However some RealTek chips are known
         * to be buggy on DAC handling, therefore disable DAC by limiting
         * DMA address space to 32bit. PCIe variants of RealTek chips
         * may not have the limitation.
         */
        lowaddr = BUS_SPACE_MAXADDR;
        if ((sc->rl_flags & RL_FLAG_PCIE) == 0)
                lowaddr = BUS_SPACE_MAXADDR_32BIT;
        error = bus_dma_tag_create(bus_get_dma_tag(dev), 1, 0,
            lowaddr, BUS_SPACE_MAXADDR, NULL, NULL,
            BUS_SPACE_MAXSIZE_32BIT, 0, BUS_SPACE_MAXSIZE_32BIT, 0,
            NULL, NULL, &sc->rl_parent_tag);
        if (error) {
                device_printf(dev, "could not allocate parent DMA tag\n");
                return (error);
        }

        /*
         * Allocate map for TX mbufs.
         */
        error = bus_dma_tag_create(sc->rl_parent_tag, 1, 0,
            BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL,
            NULL, MCLBYTES * RL_NTXSEGS, RL_NTXSEGS, 4096, 0,
            NULL, NULL, &sc->rl_ldata.rl_tx_mtag);
        if (error) {
                device_printf(dev, "could not allocate TX DMA tag\n");
                return (error);
        }

        /*
         * Allocate map for RX mbufs.
         */

        if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) {
                error = bus_dma_tag_create(sc->rl_parent_tag, sizeof(uint64_t),
                    0, BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
                    MJUM9BYTES, 1, MJUM9BYTES, 0, NULL, NULL,
                    &sc->rl_ldata.rl_jrx_mtag);
                if (error) {
                        device_printf(dev,
                            "could not allocate jumbo RX DMA tag\n");
                        return (error);
                }
        }
        error = bus_dma_tag_create(sc->rl_parent_tag, sizeof(uint64_t), 0,
            BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
            MCLBYTES, 1, MCLBYTES, 0, NULL, NULL, &sc->rl_ldata.rl_rx_mtag);
        if (error) {
                device_printf(dev, "could not allocate RX DMA tag\n");
                return (error);
        }

        /*
         * Allocate map for TX descriptor list.
         */
        error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN,
            0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
            NULL, tx_list_size, 1, tx_list_size, 0,
            NULL, NULL, &sc->rl_ldata.rl_tx_list_tag);
        if (error) {
                device_printf(dev, "could not allocate TX DMA ring tag\n");
                return (error);
        }

        /* Allocate DMA'able memory for the TX ring */

        error = bus_dmamem_alloc(sc->rl_ldata.rl_tx_list_tag,
            (void **)&sc->rl_ldata.rl_tx_list,
            BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO,
            &sc->rl_ldata.rl_tx_list_map);
        if (error) {
                device_printf(dev, "could not allocate TX DMA ring\n");
                return (error);
        }

        /* Load the map for the TX ring. */

        sc->rl_ldata.rl_tx_list_addr = 0;
        error = bus_dmamap_load(sc->rl_ldata.rl_tx_list_tag,
             sc->rl_ldata.rl_tx_list_map, sc->rl_ldata.rl_tx_list,
             tx_list_size, re_dma_map_addr,
             &sc->rl_ldata.rl_tx_list_addr, BUS_DMA_NOWAIT);
        if (error != 0 || sc->rl_ldata.rl_tx_list_addr == 0) {
                device_printf(dev, "could not load TX DMA ring\n");
                return (ENOMEM);
        }

        /* Create DMA maps for TX buffers */

        for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) {
                error = bus_dmamap_create(sc->rl_ldata.rl_tx_mtag, 0,
                    &sc->rl_ldata.rl_tx_desc[i].tx_dmamap);
                if (error) {
                        device_printf(dev, "could not create DMA map for TX\n");
                        return (error);
                }
        }

        /*
         * Allocate map for RX descriptor list.
         */
        error = bus_dma_tag_create(sc->rl_parent_tag, RL_RING_ALIGN,
            0, BUS_SPACE_MAXADDR_32BIT, BUS_SPACE_MAXADDR, NULL,
            NULL, rx_list_size, 1, rx_list_size, 0,
            NULL, NULL, &sc->rl_ldata.rl_rx_list_tag);
        if (error) {
                device_printf(dev, "could not create RX DMA ring tag\n");
                return (error);
        }

        /* Allocate DMA'able memory for the RX ring */

        error = bus_dmamem_alloc(sc->rl_ldata.rl_rx_list_tag,
            (void **)&sc->rl_ldata.rl_rx_list,
            BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO,
            &sc->rl_ldata.rl_rx_list_map);
        if (error) {
                device_printf(dev, "could not allocate RX DMA ring\n");
                return (error);
        }

        /* Load the map for the RX ring. */

        sc->rl_ldata.rl_rx_list_addr = 0;
        error = bus_dmamap_load(sc->rl_ldata.rl_rx_list_tag,
             sc->rl_ldata.rl_rx_list_map, sc->rl_ldata.rl_rx_list,
             rx_list_size, re_dma_map_addr,
             &sc->rl_ldata.rl_rx_list_addr, BUS_DMA_NOWAIT);
        if (error != 0 || sc->rl_ldata.rl_rx_list_addr == 0) {
                device_printf(dev, "could not load RX DMA ring\n");
                return (ENOMEM);
        }

        /* Create DMA maps for RX buffers */

        if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) {
                error = bus_dmamap_create(sc->rl_ldata.rl_jrx_mtag, 0,
                    &sc->rl_ldata.rl_jrx_sparemap);
                if (error) {
                        device_printf(dev,
                            "could not create spare DMA map for jumbo RX\n");
                        return (error);
                }
                for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                        error = bus_dmamap_create(sc->rl_ldata.rl_jrx_mtag, 0,
                            &sc->rl_ldata.rl_jrx_desc[i].rx_dmamap);
                        if (error) {
                                device_printf(dev,
                                    "could not create DMA map for jumbo RX\n");
                                return (error);
                        }
                }
        }
        error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0,
            &sc->rl_ldata.rl_rx_sparemap);
        if (error) {
                device_printf(dev, "could not create spare DMA map for RX\n");
                return (error);
        }
        for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                error = bus_dmamap_create(sc->rl_ldata.rl_rx_mtag, 0,
                    &sc->rl_ldata.rl_rx_desc[i].rx_dmamap);
                if (error) {
                        device_printf(dev, "could not create DMA map for RX\n");
                        return (error);
                }
        }

        /* Create DMA map for statistics. */
        error = bus_dma_tag_create(sc->rl_parent_tag, RL_DUMP_ALIGN, 0,
            BUS_SPACE_MAXADDR, BUS_SPACE_MAXADDR, NULL, NULL,
            sizeof(struct rl_stats), 1, sizeof(struct rl_stats), 0, NULL, NULL,
            &sc->rl_ldata.rl_stag);
        if (error) {
                device_printf(dev, "could not create statistics DMA tag\n");
                return (error);
        }
        /* Allocate DMA'able memory for statistics. */
        error = bus_dmamem_alloc(sc->rl_ldata.rl_stag,
            (void **)&sc->rl_ldata.rl_stats,
            BUS_DMA_WAITOK | BUS_DMA_COHERENT | BUS_DMA_ZERO,
            &sc->rl_ldata.rl_smap);
        if (error) {
                device_printf(dev,
                    "could not allocate statistics DMA memory\n");
                return (error);
        }
        /* Load the map for statistics. */
        sc->rl_ldata.rl_stats_addr = 0;
        error = bus_dmamap_load(sc->rl_ldata.rl_stag, sc->rl_ldata.rl_smap,
            sc->rl_ldata.rl_stats, sizeof(struct rl_stats), re_dma_map_addr,
             &sc->rl_ldata.rl_stats_addr, BUS_DMA_NOWAIT);
        if (error != 0 || sc->rl_ldata.rl_stats_addr == 0) {
                device_printf(dev, "could not load statistics DMA memory\n");
                return (ENOMEM);
        }

        return (0);
}

/*
 * Attach the interface. Allocate softc structures, do ifmedia
 * setup and ethernet/BPF attach.
 */
static int
re_attach(device_t dev)
{
        u_char                  eaddr[ETHER_ADDR_LEN];
        u_int16_t               as[ETHER_ADDR_LEN / 2];
        struct rl_softc         *sc;
        struct ifnet            *ifp;
        const struct rl_hwrev   *hw_rev;
        u_int32_t               cap, ctl;
        int                     hwrev;
        u_int16_t               devid, re_did = 0;
        int                     error = 0, i, phy, rid;
        int                     msic, msixc, reg;
        uint8_t                 cfg;

        sc = device_get_softc(dev);
        sc->rl_dev = dev;

        mtx_init(&sc->rl_mtx, device_get_nameunit(dev), MTX_NETWORK_LOCK,
            MTX_DEF);
        callout_init_mtx(&sc->rl_stat_callout, &sc->rl_mtx, 0);

        /*
         * Map control/status registers.
         */
        pci_enable_busmaster(dev);

        devid = pci_get_device(dev);
        /*
         * Prefer memory space register mapping over IO space.
         * Because RTL8169SC does not seem to work when memory mapping
         * is used always activate io mapping.
         */
        if (devid == RT_DEVICEID_8169SC)
                prefer_iomap = 1;
        if (prefer_iomap == 0) {
                sc->rl_res_id = PCIR_BAR(1);
                sc->rl_res_type = SYS_RES_MEMORY;
                /* RTL8168/8101E seems to use different BARs. */
                if (devid == RT_DEVICEID_8168 || devid == RT_DEVICEID_8101E)
                        sc->rl_res_id = PCIR_BAR(2);
        } else {
                sc->rl_res_id = PCIR_BAR(0);
                sc->rl_res_type = SYS_RES_IOPORT;
        }
        sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type,
            &sc->rl_res_id, RF_ACTIVE);
        if (sc->rl_res == NULL && prefer_iomap == 0) {
                sc->rl_res_id = PCIR_BAR(0);
                sc->rl_res_type = SYS_RES_IOPORT;
                sc->rl_res = bus_alloc_resource_any(dev, sc->rl_res_type,
                    &sc->rl_res_id, RF_ACTIVE);
        }
        if (sc->rl_res == NULL) {
                device_printf(dev, "couldn't map ports/memory\n");
                error = ENXIO;
                goto fail;
        }

        sc->rl_btag = rman_get_bustag(sc->rl_res);
        sc->rl_bhandle = rman_get_bushandle(sc->rl_res);

        msic = pci_msi_count(dev);
        msixc = pci_msix_count(dev);
        if (pci_find_cap(dev, PCIY_EXPRESS, &reg) == 0) {
                sc->rl_flags |= RL_FLAG_PCIE;
                sc->rl_expcap = reg;
        }
        if (bootverbose) {
                device_printf(dev, "MSI count : %d\n", msic);
                device_printf(dev, "MSI-X count : %d\n", msixc);
        }
        if (msix_disable > 0)
                msixc = 0;
        if (msi_disable > 0)
                msic = 0;
        /* Prefer MSI-X to MSI. */
        if (msixc > 0) {
                msixc = 1;
                rid = PCIR_BAR(4);
                sc->rl_res_pba = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
                    &rid, RF_ACTIVE);
                if (sc->rl_res_pba == NULL) {
                        device_printf(sc->rl_dev,
                            "could not allocate MSI-X PBA resource\n");
                }
                if (sc->rl_res_pba != NULL &&
                    pci_alloc_msix(dev, &msixc) == 0) {
                        if (msixc == 1) {
                                device_printf(dev, "Using %d MSI-X message\n",
                                    msixc);
                                sc->rl_flags |= RL_FLAG_MSIX;
                        } else
                                pci_release_msi(dev);
                }
                if ((sc->rl_flags & RL_FLAG_MSIX) == 0) {
                        if (sc->rl_res_pba != NULL)
                                bus_release_resource(dev, SYS_RES_MEMORY, rid,
                                    sc->rl_res_pba);
                        sc->rl_res_pba = NULL;
                        msixc = 0;
                }
        }
        /* Prefer MSI to INTx. */
        if (msixc == 0 && msic > 0) {
                msic = 1;
                if (pci_alloc_msi(dev, &msic) == 0) {
                        if (msic == RL_MSI_MESSAGES) {
                                device_printf(dev, "Using %d MSI message\n",
                                    msic);
                                sc->rl_flags |= RL_FLAG_MSI;
                                /* Explicitly set MSI enable bit. */
                                CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
                                cfg = CSR_READ_1(sc, RL_CFG2);
                                cfg |= RL_CFG2_MSI;
                                CSR_WRITE_1(sc, RL_CFG2, cfg);
                                CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
                        } else
                                pci_release_msi(dev);
                }
                if ((sc->rl_flags & RL_FLAG_MSI) == 0)
                        msic = 0;
        }

        /* Allocate interrupt */
        if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) == 0) {
                rid = 0;
                sc->rl_irq[0] = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
                    RF_SHAREABLE | RF_ACTIVE);
                if (sc->rl_irq[0] == NULL) {
                        device_printf(dev, "couldn't allocate IRQ resources\n");
                        error = ENXIO;
                        goto fail;
                }
        } else {
                for (i = 0, rid = 1; i < RL_MSI_MESSAGES; i++, rid++) {
                        sc->rl_irq[i] = bus_alloc_resource_any(dev,
                            SYS_RES_IRQ, &rid, RF_ACTIVE);
                        if (sc->rl_irq[i] == NULL) {
                                device_printf(dev,
                                    "couldn't llocate IRQ resources for "
                                    "message %d\n", rid);
                                error = ENXIO;
                                goto fail;
                        }
                }
        }

        if ((sc->rl_flags & RL_FLAG_MSI) == 0) {
                CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
                cfg = CSR_READ_1(sc, RL_CFG2);
                if ((cfg & RL_CFG2_MSI) != 0) {
                        device_printf(dev, "turning off MSI enable bit.\n");
                        cfg &= ~RL_CFG2_MSI;
                        CSR_WRITE_1(sc, RL_CFG2, cfg);
                }
                CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);
        }

        /* Disable ASPM L0S/L1. */
        if (sc->rl_expcap != 0) {
                cap = pci_read_config(dev, sc->rl_expcap +
                    PCIER_LINK_CAP, 2);
                if ((cap & PCIEM_LINK_CAP_ASPM) != 0) {
                        ctl = pci_read_config(dev, sc->rl_expcap +
                            PCIER_LINK_CTL, 2);
                        if ((ctl & 0x0003) != 0) {
                                ctl &= ~0x0003;
                                pci_write_config(dev, sc->rl_expcap +
                                    PCIER_LINK_CTL, ctl, 2);
                                device_printf(dev, "ASPM disabled\n");
                        }
                } else
                        device_printf(dev, "no ASPM capability\n");
        }

        hw_rev = re_hwrevs;
        hwrev = CSR_READ_4(sc, RL_TXCFG);
        switch (hwrev & 0x70000000) {
        case 0x00000000:
        case 0x10000000:
                device_printf(dev, "Chip rev. 0x%08x\n", hwrev & 0xfc800000);
                hwrev &= (RL_TXCFG_HWREV | 0x80000000);
                break;
        default:
                device_printf(dev, "Chip rev. 0x%08x\n", hwrev & 0x7c800000);
                hwrev &= RL_TXCFG_HWREV;
                break;
        }
        device_printf(dev, "MAC rev. 0x%08x\n", hwrev & 0x00700000);
        while (hw_rev->rl_desc != NULL) {
                if (hw_rev->rl_rev == hwrev) {
                        sc->rl_type = hw_rev->rl_type;
                        sc->rl_hwrev = hw_rev;
                        break;
                }
                hw_rev++;
        }
        if (hw_rev->rl_desc == NULL) {
                device_printf(dev, "Unknown H/W revision: 0x%08x\n", hwrev);
                error = ENXIO;
                goto fail;
        }

        switch (hw_rev->rl_rev) {
        case RL_HWREV_8139CPLUS:
                sc->rl_flags |= RL_FLAG_FASTETHER | RL_FLAG_AUTOPAD;
                break;
        case RL_HWREV_8100E:
        case RL_HWREV_8101E:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_FASTETHER;
                break;
        case RL_HWREV_8102E:
        case RL_HWREV_8102EL:
        case RL_HWREV_8102EL_SPIN1:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | RL_FLAG_DESCV2 |
                    RL_FLAG_MACSTAT | RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP |
                    RL_FLAG_AUTOPAD;
                break;
        case RL_HWREV_8103E:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR | RL_FLAG_DESCV2 |
                    RL_FLAG_MACSTAT | RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP |
                    RL_FLAG_AUTOPAD | RL_FLAG_MACSLEEP;
                break;
        case RL_HWREV_8401E:
        case RL_HWREV_8105E:
        case RL_HWREV_8105E_SPIN1:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM |
                    RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT |
                    RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD;
                break;
        case RL_HWREV_8402:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM |
                    RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT |
                    RL_FLAG_FASTETHER | RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD |
                    RL_FLAG_CMDSTOP_WAIT_TXQ;
                break;
        case RL_HWREV_8168B_SPIN1:
        case RL_HWREV_8168B_SPIN2:
                sc->rl_flags |= RL_FLAG_WOLRXENB;
                /* FALLTHROUGH */
        case RL_HWREV_8168B_SPIN3:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_MACSTAT;
                break;
        case RL_HWREV_8168C_SPIN2:
                sc->rl_flags |= RL_FLAG_MACSLEEP;
                /* FALLTHROUGH */
        case RL_HWREV_8168C:
                if ((hwrev & 0x00700000) == 0x00200000)
                        sc->rl_flags |= RL_FLAG_MACSLEEP;
                /* FALLTHROUGH */
        case RL_HWREV_8168CP:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
                    RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP |
                    RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 | RL_FLAG_WOL_MANLINK;
                break;
        case RL_HWREV_8168D:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM |
                    RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT |
                    RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 |
                    RL_FLAG_WOL_MANLINK;
                break;
        case RL_HWREV_8168DP:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
                    RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_AUTOPAD |
                    RL_FLAG_JUMBOV2 | RL_FLAG_WAIT_TXPOLL | RL_FLAG_WOL_MANLINK;
                break;
        case RL_HWREV_8168E:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PHYWAKE_PM |
                    RL_FLAG_PAR | RL_FLAG_DESCV2 | RL_FLAG_MACSTAT |
                    RL_FLAG_CMDSTOP | RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 |
                    RL_FLAG_WOL_MANLINK;
                break;
        case RL_HWREV_8168E_VL:
        case RL_HWREV_8168F:
        case RL_HWREV_8411:
                sc->rl_flags |= RL_FLAG_PHYWAKE | RL_FLAG_PAR |
                    RL_FLAG_DESCV2 | RL_FLAG_MACSTAT | RL_FLAG_CMDSTOP |
                    RL_FLAG_AUTOPAD | RL_FLAG_JUMBOV2 |
                    RL_FLAG_CMDSTOP_WAIT_TXQ | RL_FLAG_WOL_MANLINK;
                break;
        case RL_HWREV_8169_8110SB:
        case RL_HWREV_8169_8110SBL:
        case RL_HWREV_8169_8110SC:
        case RL_HWREV_8169_8110SCE:
                sc->rl_flags |= RL_FLAG_PHYWAKE;
                /* FALLTHROUGH */
        case RL_HWREV_8169:
        case RL_HWREV_8169S:
        case RL_HWREV_8110S:
                sc->rl_flags |= RL_FLAG_MACRESET;
                break;
        default:
                break;
        }

        if (sc->rl_hwrev->rl_rev == RL_HWREV_8139CPLUS) {
                sc->rl_cfg0 = RL_8139_CFG0;
                sc->rl_cfg1 = RL_8139_CFG1;
                sc->rl_cfg2 = 0;
                sc->rl_cfg3 = RL_8139_CFG3;
                sc->rl_cfg4 = RL_8139_CFG4;
                sc->rl_cfg5 = RL_8139_CFG5;
        } else {
                sc->rl_cfg0 = RL_CFG0;
                sc->rl_cfg1 = RL_CFG1;
                sc->rl_cfg2 = RL_CFG2;
                sc->rl_cfg3 = RL_CFG3;
                sc->rl_cfg4 = RL_CFG4;
                sc->rl_cfg5 = RL_CFG5;
        }

        /* Reset the adapter. */
        RL_LOCK(sc);
        re_reset(sc);
        RL_UNLOCK(sc);

        /* Enable PME. */
        CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);
        cfg = CSR_READ_1(sc, sc->rl_cfg1);
        cfg |= RL_CFG1_PME;
        CSR_WRITE_1(sc, sc->rl_cfg1, cfg);
        cfg = CSR_READ_1(sc, sc->rl_cfg5);
        cfg &= RL_CFG5_PME_STS;
        CSR_WRITE_1(sc, sc->rl_cfg5, cfg);
        CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);

        if ((sc->rl_flags & RL_FLAG_PAR) != 0) {
                /*
                 * XXX Should have a better way to extract station
                 * address from EEPROM.
                 */
                for (i = 0; i < ETHER_ADDR_LEN; i++)
                        eaddr[i] = CSR_READ_1(sc, RL_IDR0 + i);
        } else {
                sc->rl_eewidth = RL_9356_ADDR_LEN;
                re_read_eeprom(sc, (caddr_t)&re_did, 0, 1);
                if (re_did != 0x8129)
                        sc->rl_eewidth = RL_9346_ADDR_LEN;

                /*
                 * Get station address from the EEPROM.
                 */
                re_read_eeprom(sc, (caddr_t)as, RL_EE_EADDR, 3);
                for (i = 0; i < ETHER_ADDR_LEN / 2; i++)
                        as[i] = le16toh(as[i]);
                bcopy(as, eaddr, ETHER_ADDR_LEN);
        }

        if (sc->rl_type == RL_8169) {
                /* Set RX length mask and number of descriptors. */
                sc->rl_rxlenmask = RL_RDESC_STAT_GFRAGLEN;
                sc->rl_txstart = RL_GTXSTART;
                sc->rl_ldata.rl_tx_desc_cnt = RL_8169_TX_DESC_CNT;
                sc->rl_ldata.rl_rx_desc_cnt = RL_8169_RX_DESC_CNT;
        } else {
                /* Set RX length mask and number of descriptors. */
                sc->rl_rxlenmask = RL_RDESC_STAT_FRAGLEN;
                sc->rl_txstart = RL_TXSTART;
                sc->rl_ldata.rl_tx_desc_cnt = RL_8139_TX_DESC_CNT;
                sc->rl_ldata.rl_rx_desc_cnt = RL_8139_RX_DESC_CNT;
        }

        error = re_allocmem(dev, sc);
        if (error)
                goto fail;
        re_add_sysctls(sc);

        ifp = sc->rl_ifp = if_alloc(IFT_ETHER);
        if (ifp == NULL) {
                device_printf(dev, "can not if_alloc()\n");
                error = ENOSPC;
                goto fail;
        }

        /* Take controller out of deep sleep mode. */
        if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) {
                if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80)
                        CSR_WRITE_1(sc, RL_GPIO,
                            CSR_READ_1(sc, RL_GPIO) | 0x01);
                else
                        CSR_WRITE_1(sc, RL_GPIO,
                            CSR_READ_1(sc, RL_GPIO) & ~0x01);
        }

        /* Take PHY out of power down mode. */
        if ((sc->rl_flags & RL_FLAG_PHYWAKE_PM) != 0) {
                CSR_WRITE_1(sc, RL_PMCH, CSR_READ_1(sc, RL_PMCH) | 0x80);
                if (hw_rev->rl_rev == RL_HWREV_8401E)
                        CSR_WRITE_1(sc, 0xD1, CSR_READ_1(sc, 0xD1) & ~0x08);
        }
        if ((sc->rl_flags & RL_FLAG_PHYWAKE) != 0) {
                re_gmii_writereg(dev, 1, 0x1f, 0);
                re_gmii_writereg(dev, 1, 0x0e, 0);
        }

        ifp->if_softc = sc;
        if_initname(ifp, device_get_name(dev), device_get_unit(dev));
        ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
        ifp->if_ioctl = re_ioctl;
        ifp->if_start = re_start;
        /*
         * RTL8168/8111C generates wrong IP checksummed frame if the
         * packet has IP options so disable TX IP checksum offloading.
         */
        if (sc->rl_hwrev->rl_rev == RL_HWREV_8168C ||
            sc->rl_hwrev->rl_rev == RL_HWREV_8168C_SPIN2 ||
            sc->rl_hwrev->rl_rev == RL_HWREV_8168CP)
                ifp->if_hwassist = CSUM_TCP | CSUM_UDP;
        else
                ifp->if_hwassist = CSUM_IP | CSUM_TCP | CSUM_UDP;
        ifp->if_hwassist |= CSUM_TSO;
        ifp->if_capabilities = IFCAP_HWCSUM | IFCAP_TSO4;
        ifp->if_capenable = ifp->if_capabilities;
        ifp->if_init = re_init;
        IFQ_SET_MAXLEN(&ifp->if_snd, RL_IFQ_MAXLEN);
        ifp->if_snd.ifq_drv_maxlen = RL_IFQ_MAXLEN;
        IFQ_SET_READY(&ifp->if_snd);

        TASK_INIT(&sc->rl_inttask, 0, re_int_task, sc);

#define RE_PHYAD_INTERNAL        0

        /* Do MII setup. */
        phy = RE_PHYAD_INTERNAL;
        if (sc->rl_type == RL_8169)
                phy = 1;
        error = mii_attach(dev, &sc->rl_miibus, ifp, re_ifmedia_upd,
            re_ifmedia_sts, BMSR_DEFCAPMASK, phy, MII_OFFSET_ANY, MIIF_DOPAUSE);
        if (error != 0) {
                device_printf(dev, "attaching PHYs failed\n");
                goto fail;
        }

        /*
         * Call MI attach routine.
         */
        ether_ifattach(ifp, eaddr);

        /* VLAN capability setup */
        ifp->if_capabilities |= IFCAP_VLAN_MTU | IFCAP_VLAN_HWTAGGING;
        if (ifp->if_capabilities & IFCAP_HWCSUM)
                ifp->if_capabilities |= IFCAP_VLAN_HWCSUM;
        /* Enable WOL if PM is supported. */
        if (pci_find_cap(sc->rl_dev, PCIY_PMG, &reg) == 0)
                ifp->if_capabilities |= IFCAP_WOL;
        ifp->if_capenable = ifp->if_capabilities;
        ifp->if_capenable &= ~(IFCAP_WOL_UCAST | IFCAP_WOL_MCAST);
        /*
         * Don't enable TSO by default.  It is known to generate
         * corrupted TCP segments(bad TCP options) under certain
         * circumtances.
         */
        ifp->if_hwassist &= ~CSUM_TSO;
        ifp->if_capenable &= ~(IFCAP_TSO4 | IFCAP_VLAN_HWTSO);
#ifdef DEVICE_POLLING
        ifp->if_capabilities |= IFCAP_POLLING;
#endif
        /*
         * Tell the upper layer(s) we support long frames.
         * Must appear after the call to ether_ifattach() because
         * ether_ifattach() sets ifi_hdrlen to the default value.
         */
        ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);

#ifdef DEV_NETMAP
        re_netmap_attach(sc);
#endif /* DEV_NETMAP */
#ifdef RE_DIAG
        /*
         * Perform hardware diagnostic on the original RTL8169.
         * Some 32-bit cards were incorrectly wired and would
         * malfunction if plugged into a 64-bit slot.
         */

        if (hwrev == RL_HWREV_8169) {
                error = re_diag(sc);
                if (error) {
                        device_printf(dev,
                        "attach aborted due to hardware diag failure\n");
                        ether_ifdetach(ifp);
                        goto fail;
                }
        }
#endif

#ifdef RE_TX_MODERATION
        intr_filter = 1;
#endif
        /* Hook interrupt last to avoid having to lock softc */
        if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) != 0 &&
            intr_filter == 0) {
                error = bus_setup_intr(dev, sc->rl_irq[0],
                    INTR_TYPE_NET | INTR_MPSAFE, NULL, re_intr_msi, sc,
                    &sc->rl_intrhand[0]);
        } else {
                error = bus_setup_intr(dev, sc->rl_irq[0],
                    INTR_TYPE_NET | INTR_MPSAFE, re_intr, NULL, sc,
                    &sc->rl_intrhand[0]);
        }
        if (error) {
                device_printf(dev, "couldn't set up irq\n");
                ether_ifdetach(ifp);
        }

fail:

        if (error)
                re_detach(dev);

        return (error);
}

/*
 * Shutdown hardware and free up resources. This can be called any
 * time after the mutex has been initialized. It is called in both
 * the error case in attach and the normal detach case so it needs
 * to be careful about only freeing resources that have actually been
 * allocated.
 */
static int
re_detach(device_t dev)
{
        struct rl_softc         *sc;
        struct ifnet            *ifp;
        int                     i, rid;

        sc = device_get_softc(dev);
        ifp = sc->rl_ifp;
        KASSERT(mtx_initialized(&sc->rl_mtx), ("re mutex not initialized"));

        /* These should only be active if attach succeeded */
        if (device_is_attached(dev)) {
#ifdef DEVICE_POLLING
                if (ifp->if_capenable & IFCAP_POLLING)
                        ether_poll_deregister(ifp);
#endif
                RL_LOCK(sc);
#if 0
                sc->suspended = 1;
#endif
                re_stop(sc);
                RL_UNLOCK(sc);
                callout_drain(&sc->rl_stat_callout);
                taskqueue_drain(taskqueue_fast, &sc->rl_inttask);
                /*
                 * Force off the IFF_UP flag here, in case someone
                 * still had a BPF descriptor attached to this
                 * interface. If they do, ether_ifdetach() will cause
                 * the BPF code to try and clear the promisc mode
                 * flag, which will bubble down to re_ioctl(),
                 * which will try to call re_init() again. This will
                 * turn the NIC back on and restart the MII ticker,
                 * which will panic the system when the kernel tries
                 * to invoke the re_tick() function that isn't there
                 * anymore.
                 */
                ifp->if_flags &= ~IFF_UP;
                ether_ifdetach(ifp);
        }
        if (sc->rl_miibus)
                device_delete_child(dev, sc->rl_miibus);
        bus_generic_detach(dev);

        /*
         * The rest is resource deallocation, so we should already be
         * stopped here.
         */

        if (sc->rl_intrhand[0] != NULL) {
                bus_teardown_intr(dev, sc->rl_irq[0], sc->rl_intrhand[0]);
                sc->rl_intrhand[0] = NULL;
        }
        if (ifp != NULL) {
#ifdef DEV_NETMAP
                netmap_detach(ifp);
#endif /* DEV_NETMAP */
                if_free(ifp);
        }
        if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) == 0)
                rid = 0;
        else
                rid = 1;
        if (sc->rl_irq[0] != NULL) {
                bus_release_resource(dev, SYS_RES_IRQ, rid, sc->rl_irq[0]);
                sc->rl_irq[0] = NULL;
        }
        if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) != 0)
                pci_release_msi(dev);
        if (sc->rl_res_pba) {
                rid = PCIR_BAR(4);
                bus_release_resource(dev, SYS_RES_MEMORY, rid, sc->rl_res_pba);
        }
        if (sc->rl_res)
                bus_release_resource(dev, sc->rl_res_type, sc->rl_res_id,
                    sc->rl_res);

        /* Unload and free the RX DMA ring memory and map */

        if (sc->rl_ldata.rl_rx_list_tag) {
                if (sc->rl_ldata.rl_rx_list_map)
                        bus_dmamap_unload(sc->rl_ldata.rl_rx_list_tag,
                            sc->rl_ldata.rl_rx_list_map);
                if (sc->rl_ldata.rl_rx_list_map && sc->rl_ldata.rl_rx_list)
                        bus_dmamem_free(sc->rl_ldata.rl_rx_list_tag,
                            sc->rl_ldata.rl_rx_list,
                            sc->rl_ldata.rl_rx_list_map);
                bus_dma_tag_destroy(sc->rl_ldata.rl_rx_list_tag);
        }

        /* Unload and free the TX DMA ring memory and map */

        if (sc->rl_ldata.rl_tx_list_tag) {
                if (sc->rl_ldata.rl_tx_list_map)
                        bus_dmamap_unload(sc->rl_ldata.rl_tx_list_tag,
                            sc->rl_ldata.rl_tx_list_map);
                if (sc->rl_ldata.rl_tx_list_map && sc->rl_ldata.rl_tx_list)
                        bus_dmamem_free(sc->rl_ldata.rl_tx_list_tag,
                            sc->rl_ldata.rl_tx_list,
                            sc->rl_ldata.rl_tx_list_map);
                bus_dma_tag_destroy(sc->rl_ldata.rl_tx_list_tag);
        }

        /* Destroy all the RX and TX buffer maps */

        if (sc->rl_ldata.rl_tx_mtag) {
                for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) {
                        if (sc->rl_ldata.rl_tx_desc[i].tx_dmamap)
                                bus_dmamap_destroy(sc->rl_ldata.rl_tx_mtag,
                                    sc->rl_ldata.rl_tx_desc[i].tx_dmamap);
                }
                bus_dma_tag_destroy(sc->rl_ldata.rl_tx_mtag);
        }
        if (sc->rl_ldata.rl_rx_mtag) {
                for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                        if (sc->rl_ldata.rl_rx_desc[i].rx_dmamap)
                                bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag,
                                    sc->rl_ldata.rl_rx_desc[i].rx_dmamap);
                }
                if (sc->rl_ldata.rl_rx_sparemap)
                        bus_dmamap_destroy(sc->rl_ldata.rl_rx_mtag,
                            sc->rl_ldata.rl_rx_sparemap);
                bus_dma_tag_destroy(sc->rl_ldata.rl_rx_mtag);
        }
        if (sc->rl_ldata.rl_jrx_mtag) {
                for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                        if (sc->rl_ldata.rl_jrx_desc[i].rx_dmamap)
                                bus_dmamap_destroy(sc->rl_ldata.rl_jrx_mtag,
                                    sc->rl_ldata.rl_jrx_desc[i].rx_dmamap);
                }
                if (sc->rl_ldata.rl_jrx_sparemap)
                        bus_dmamap_destroy(sc->rl_ldata.rl_jrx_mtag,
                            sc->rl_ldata.rl_jrx_sparemap);
                bus_dma_tag_destroy(sc->rl_ldata.rl_jrx_mtag);
        }
        /* Unload and free the stats buffer and map */

        if (sc->rl_ldata.rl_stag) {
                if (sc->rl_ldata.rl_smap)
                        bus_dmamap_unload(sc->rl_ldata.rl_stag,
                            sc->rl_ldata.rl_smap);
                if (sc->rl_ldata.rl_smap && sc->rl_ldata.rl_stats)
                        bus_dmamem_free(sc->rl_ldata.rl_stag,
                            sc->rl_ldata.rl_stats, sc->rl_ldata.rl_smap);
                bus_dma_tag_destroy(sc->rl_ldata.rl_stag);
        }

        if (sc->rl_parent_tag)
                bus_dma_tag_destroy(sc->rl_parent_tag);

        mtx_destroy(&sc->rl_mtx);

        return (0);
}

static __inline void
re_discard_rxbuf(struct rl_softc *sc, int idx)
{
        struct rl_desc          *desc;
        struct rl_rxdesc        *rxd;
        uint32_t                cmdstat;

        if (sc->rl_ifp->if_mtu > RL_MTU &&
            (sc->rl_flags & RL_FLAG_JUMBOV2) != 0)
                rxd = &sc->rl_ldata.rl_jrx_desc[idx];
        else
                rxd = &sc->rl_ldata.rl_rx_desc[idx];
        desc = &sc->rl_ldata.rl_rx_list[idx];
        desc->rl_vlanctl = 0;
        cmdstat = rxd->rx_size;
        if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1)
                cmdstat |= RL_RDESC_CMD_EOR;
        desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN);
}

static int
re_newbuf(struct rl_softc *sc, int idx)
{
        struct mbuf             *m;
        struct rl_rxdesc        *rxd;
        bus_dma_segment_t       segs[1];
        bus_dmamap_t            map;
        struct rl_desc          *desc;
        uint32_t                cmdstat;
        int                     error, nsegs;

        m = m_getcl(M_NOWAIT, MT_DATA, M_PKTHDR);
        if (m == NULL)
                return (ENOBUFS);

        m->m_len = m->m_pkthdr.len = MCLBYTES;
#ifdef RE_FIXUP_RX
        /*
         * This is part of an evil trick to deal with non-x86 platforms.
         * The RealTek chip requires RX buffers to be aligned on 64-bit
         * boundaries, but that will hose non-x86 machines. To get around
         * this, we leave some empty space at the start of each buffer
         * and for non-x86 hosts, we copy the buffer back six bytes
         * to achieve word alignment. This is slightly more efficient
         * than allocating a new buffer, copying the contents, and
         * discarding the old buffer.
         */
        m_adj(m, RE_ETHER_ALIGN);
#endif
        error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_rx_mtag,
            sc->rl_ldata.rl_rx_sparemap, m, segs, &nsegs, BUS_DMA_NOWAIT);
        if (error != 0) {
                m_freem(m);
                return (ENOBUFS);
        }
        KASSERT(nsegs == 1, ("%s: %d segment returned!", __func__, nsegs));

        rxd = &sc->rl_ldata.rl_rx_desc[idx];
        if (rxd->rx_m != NULL) {
                bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap,
                    BUS_DMASYNC_POSTREAD);
                bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap);
        }

        rxd->rx_m = m;
        map = rxd->rx_dmamap;
        rxd->rx_dmamap = sc->rl_ldata.rl_rx_sparemap;
        rxd->rx_size = segs[0].ds_len;
        sc->rl_ldata.rl_rx_sparemap = map;
        bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag, rxd->rx_dmamap,
            BUS_DMASYNC_PREREAD);

        desc = &sc->rl_ldata.rl_rx_list[idx];
        desc->rl_vlanctl = 0;
        desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[0].ds_addr));
        desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[0].ds_addr));
        cmdstat = segs[0].ds_len;
        if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1)
                cmdstat |= RL_RDESC_CMD_EOR;
        desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN);

        return (0);
}

static int
re_jumbo_newbuf(struct rl_softc *sc, int idx)
{
        struct mbuf             *m;
        struct rl_rxdesc        *rxd;
        bus_dma_segment_t       segs[1];
        bus_dmamap_t            map;
        struct rl_desc          *desc;
        uint32_t                cmdstat;
        int                     error, nsegs;

        m = m_getjcl(M_NOWAIT, MT_DATA, M_PKTHDR, MJUM9BYTES);
        if (m == NULL)
                return (ENOBUFS);
        m->m_len = m->m_pkthdr.len = MJUM9BYTES;
#ifdef RE_FIXUP_RX
        m_adj(m, RE_ETHER_ALIGN);
#endif
        error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_jrx_mtag,
            sc->rl_ldata.rl_jrx_sparemap, m, segs, &nsegs, BUS_DMA_NOWAIT);
        if (error != 0) {
                m_freem(m);
                return (ENOBUFS);
        }
        KASSERT(nsegs == 1, ("%s: %d segment returned!", __func__, nsegs));

        rxd = &sc->rl_ldata.rl_jrx_desc[idx];
        if (rxd->rx_m != NULL) {
                bus_dmamap_sync(sc->rl_ldata.rl_jrx_mtag, rxd->rx_dmamap,
                    BUS_DMASYNC_POSTREAD);
                bus_dmamap_unload(sc->rl_ldata.rl_jrx_mtag, rxd->rx_dmamap);
        }

        rxd->rx_m = m;
        map = rxd->rx_dmamap;
        rxd->rx_dmamap = sc->rl_ldata.rl_jrx_sparemap;
        rxd->rx_size = segs[0].ds_len;
        sc->rl_ldata.rl_jrx_sparemap = map;
        bus_dmamap_sync(sc->rl_ldata.rl_jrx_mtag, rxd->rx_dmamap,
            BUS_DMASYNC_PREREAD);

        desc = &sc->rl_ldata.rl_rx_list[idx];
        desc->rl_vlanctl = 0;
        desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[0].ds_addr));
        desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[0].ds_addr));
        cmdstat = segs[0].ds_len;
        if (idx == sc->rl_ldata.rl_rx_desc_cnt - 1)
                cmdstat |= RL_RDESC_CMD_EOR;
        desc->rl_cmdstat = htole32(cmdstat | RL_RDESC_CMD_OWN);

        return (0);
}

#ifdef RE_FIXUP_RX
static __inline void
re_fixup_rx(struct mbuf *m)
{
        int                     i;
        uint16_t                *src, *dst;

        src = mtod(m, uint16_t *);
        dst = src - (RE_ETHER_ALIGN - ETHER_ALIGN) / sizeof *src;

        for (i = 0; i < (m->m_len / sizeof(uint16_t) + 1); i++)
                *dst++ = *src++;

        m->m_data -= RE_ETHER_ALIGN - ETHER_ALIGN;
}
#endif

static int
re_tx_list_init(struct rl_softc *sc)
{
        struct rl_desc          *desc;
        int                     i;

        RL_LOCK_ASSERT(sc);

        bzero(sc->rl_ldata.rl_tx_list,
            sc->rl_ldata.rl_tx_desc_cnt * sizeof(struct rl_desc));
        for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++)
                sc->rl_ldata.rl_tx_desc[i].tx_m = NULL;
#ifdef DEV_NETMAP
        re_netmap_tx_init(sc);
#endif /* DEV_NETMAP */
        /* Set EOR. */
        desc = &sc->rl_ldata.rl_tx_list[sc->rl_ldata.rl_tx_desc_cnt - 1];
        desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOR);

        bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
            sc->rl_ldata.rl_tx_list_map,
            BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);

        sc->rl_ldata.rl_tx_prodidx = 0;
        sc->rl_ldata.rl_tx_considx = 0;
        sc->rl_ldata.rl_tx_free = sc->rl_ldata.rl_tx_desc_cnt;

        return (0);
}

static int
re_rx_list_init(struct rl_softc *sc)
{
        int                     error, i;

        bzero(sc->rl_ldata.rl_rx_list,
            sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc));
        for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                sc->rl_ldata.rl_rx_desc[i].rx_m = NULL;
                if ((error = re_newbuf(sc, i)) != 0)
                        return (error);
        }
#ifdef DEV_NETMAP
        re_netmap_rx_init(sc);
#endif /* DEV_NETMAP */

        /* Flush the RX descriptors */

        bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
            sc->rl_ldata.rl_rx_list_map,
            BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);

        sc->rl_ldata.rl_rx_prodidx = 0;
        sc->rl_head = sc->rl_tail = NULL;
        sc->rl_int_rx_act = 0;

        return (0);
}

static int
re_jrx_list_init(struct rl_softc *sc)
{
        int                     error, i;

        bzero(sc->rl_ldata.rl_rx_list,
            sc->rl_ldata.rl_rx_desc_cnt * sizeof(struct rl_desc));
        for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                sc->rl_ldata.rl_jrx_desc[i].rx_m = NULL;
                if ((error = re_jumbo_newbuf(sc, i)) != 0)
                        return (error);
        }

        bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
            sc->rl_ldata.rl_rx_list_map,
            BUS_DMASYNC_PREWRITE | BUS_DMASYNC_PREREAD);

        sc->rl_ldata.rl_rx_prodidx = 0;
        sc->rl_head = sc->rl_tail = NULL;
        sc->rl_int_rx_act = 0;

        return (0);
}

/*
 * RX handler for C+ and 8169. For the gigE chips, we support
 * the reception of jumbo frames that have been fragmented
 * across multiple 2K mbuf cluster buffers.
 */
static int
re_rxeof(struct rl_softc *sc, int *rx_npktsp)
{
        struct mbuf             *m;
        struct ifnet            *ifp;
        int                     i, rxerr, total_len;
        struct rl_desc          *cur_rx;
        u_int32_t               rxstat, rxvlan;
        int                     jumbo, maxpkt = 16, rx_npkts = 0;

        RL_LOCK_ASSERT(sc);

        ifp = sc->rl_ifp;
#ifdef DEV_NETMAP
        if (netmap_rx_irq(ifp, 0 | (NETMAP_LOCKED_ENTER|NETMAP_LOCKED_EXIT),
            &rx_npkts))
                return 0;
#endif /* DEV_NETMAP */
        if (ifp->if_mtu > RL_MTU && (sc->rl_flags & RL_FLAG_JUMBOV2) != 0)
                jumbo = 1;
        else
                jumbo = 0;

        /* Invalidate the descriptor memory */

        bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
            sc->rl_ldata.rl_rx_list_map,
            BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);

        for (i = sc->rl_ldata.rl_rx_prodidx; maxpkt > 0;
            i = RL_RX_DESC_NXT(sc, i)) {
                if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
                        break;
                cur_rx = &sc->rl_ldata.rl_rx_list[i];
                rxstat = le32toh(cur_rx->rl_cmdstat);
                if ((rxstat & RL_RDESC_STAT_OWN) != 0)
                        break;
                total_len = rxstat & sc->rl_rxlenmask;
                rxvlan = le32toh(cur_rx->rl_vlanctl);
                if (jumbo != 0)
                        m = sc->rl_ldata.rl_jrx_desc[i].rx_m;
                else
                        m = sc->rl_ldata.rl_rx_desc[i].rx_m;

                if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0 &&
                    (rxstat & (RL_RDESC_STAT_SOF | RL_RDESC_STAT_EOF)) !=
                    (RL_RDESC_STAT_SOF | RL_RDESC_STAT_EOF)) {
                        /*
                         * RTL8168C or later controllers do not
                         * support multi-fragment packet.
                         */
                        re_discard_rxbuf(sc, i);
                        continue;
                } else if ((rxstat & RL_RDESC_STAT_EOF) == 0) {
                        if (re_newbuf(sc, i) != 0) {
                                /*
                                 * If this is part of a multi-fragment packet,
                                 * discard all the pieces.
                                 */
                                if (sc->rl_head != NULL) {
                                        m_freem(sc->rl_head);
                                        sc->rl_head = sc->rl_tail = NULL;
                                }
                                re_discard_rxbuf(sc, i);
                                continue;
                        }
                        m->m_len = RE_RX_DESC_BUFLEN;
                        if (sc->rl_head == NULL)
                                sc->rl_head = sc->rl_tail = m;
                        else {
                                m->m_flags &= ~M_PKTHDR;
                                sc->rl_tail->m_next = m;
                                sc->rl_tail = m;
                        }
                        continue;
                }

                /*
                 * NOTE: for the 8139C+, the frame length field
                 * is always 12 bits in size, but for the gigE chips,
                 * it is 13 bits (since the max RX frame length is 16K).
                 * Unfortunately, all 32 bits in the status word
                 * were already used, so to make room for the extra
                 * length bit, RealTek took out the 'frame alignment
                 * error' bit and shifted the other status bits
                 * over one slot. The OWN, EOR, FS and LS bits are
                 * still in the same places. We have already extracted
                 * the frame length and checked the OWN bit, so rather
                 * than using an alternate bit mapping, we shift the
                 * status bits one space to the right so we can evaluate
                 * them using the 8169 status as though it was in the
                 * same format as that of the 8139C+.
                 */
                if (sc->rl_type == RL_8169)
                        rxstat >>= 1;

                /*
                 * if total_len > 2^13-1, both _RXERRSUM and _GIANT will be
                 * set, but if CRC is clear, it will still be a valid frame.
                 */
                if ((rxstat & RL_RDESC_STAT_RXERRSUM) != 0) {
                        rxerr = 1;
                        if ((sc->rl_flags & RL_FLAG_JUMBOV2) == 0 &&
                            total_len > 8191 &&
                            (rxstat & RL_RDESC_STAT_ERRS) == RL_RDESC_STAT_GIANT)
                                rxerr = 0;
                        if (rxerr != 0) {
                                ifp->if_ierrors++;
                                /*
                                 * If this is part of a multi-fragment packet,
                                 * discard all the pieces.
                                 */
                                if (sc->rl_head != NULL) {
                                        m_freem(sc->rl_head);
                                        sc->rl_head = sc->rl_tail = NULL;
                                }
                                re_discard_rxbuf(sc, i);
                                continue;
                        }
                }

                /*
                 * If allocating a replacement mbuf fails,
                 * reload the current one.
                 */
                if (jumbo != 0)
                        rxerr = re_jumbo_newbuf(sc, i);
                else
                        rxerr = re_newbuf(sc, i);
                if (rxerr != 0) {
                        ifp->if_iqdrops++;
                        if (sc->rl_head != NULL) {
                                m_freem(sc->rl_head);
                                sc->rl_head = sc->rl_tail = NULL;
                        }
                        re_discard_rxbuf(sc, i);
                        continue;
                }

                if (sc->rl_head != NULL) {
                        if (jumbo != 0)
                                m->m_len = total_len;
                        else {
                                m->m_len = total_len % RE_RX_DESC_BUFLEN;
                                if (m->m_len == 0)
                                        m->m_len = RE_RX_DESC_BUFLEN;
                        }
                        /*
                         * Special case: if there's 4 bytes or less
                         * in this buffer, the mbuf can be discarded:
                         * the last 4 bytes is the CRC, which we don't
                         * care about anyway.
                         */
                        if (m->m_len <= ETHER_CRC_LEN) {
                                sc->rl_tail->m_len -=
                                    (ETHER_CRC_LEN - m->m_len);
                                m_freem(m);
                        } else {
                                m->m_len -= ETHER_CRC_LEN;
                                m->m_flags &= ~M_PKTHDR;
                                sc->rl_tail->m_next = m;
                        }
                        m = sc->rl_head;
                        sc->rl_head = sc->rl_tail = NULL;
                        m->m_pkthdr.len = total_len - ETHER_CRC_LEN;
                } else
                        m->m_pkthdr.len = m->m_len =
                            (total_len - ETHER_CRC_LEN);

#ifdef RE_FIXUP_RX
                re_fixup_rx(m);
#endif
                ifp->if_ipackets++;
                m->m_pkthdr.rcvif = ifp;

                /* Do RX checksumming if enabled */

                if (ifp->if_capenable & IFCAP_RXCSUM) {
                        if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) {
                                /* Check IP header checksum */
                                if (rxstat & RL_RDESC_STAT_PROTOID)
                                        m->m_pkthdr.csum_flags |=
                                            CSUM_IP_CHECKED;
                                if (!(rxstat & RL_RDESC_STAT_IPSUMBAD))
                                        m->m_pkthdr.csum_flags |=
                                            CSUM_IP_VALID;

                                /* Check TCP/UDP checksum */
                                if ((RL_TCPPKT(rxstat) &&
                                    !(rxstat & RL_RDESC_STAT_TCPSUMBAD)) ||
                                    (RL_UDPPKT(rxstat) &&
                                     !(rxstat & RL_RDESC_STAT_UDPSUMBAD))) {
                                        m->m_pkthdr.csum_flags |=
                                                CSUM_DATA_VALID|CSUM_PSEUDO_HDR;
                                        m->m_pkthdr.csum_data = 0xffff;
                                }
                        } else {
                                /*
                                 * RTL8168C/RTL816CP/RTL8111C/RTL8111CP
                                 */
                                if ((rxstat & RL_RDESC_STAT_PROTOID) &&
                                    (rxvlan & RL_RDESC_IPV4))
                                        m->m_pkthdr.csum_flags |=
                                            CSUM_IP_CHECKED;
                                if (!(rxstat & RL_RDESC_STAT_IPSUMBAD) &&
                                    (rxvlan & RL_RDESC_IPV4))
                                        m->m_pkthdr.csum_flags |=
                                            CSUM_IP_VALID;
                                if (((rxstat & RL_RDESC_STAT_TCP) &&
                                    !(rxstat & RL_RDESC_STAT_TCPSUMBAD)) ||
                                    ((rxstat & RL_RDESC_STAT_UDP) &&
                                    !(rxstat & RL_RDESC_STAT_UDPSUMBAD))) {
                                        m->m_pkthdr.csum_flags |=
                                                CSUM_DATA_VALID|CSUM_PSEUDO_HDR;
                                        m->m_pkthdr.csum_data = 0xffff;
                                }
                        }
                }
                maxpkt--;
                if (rxvlan & RL_RDESC_VLANCTL_TAG) {
                        m->m_pkthdr.ether_vtag =
                            bswap16((rxvlan & RL_RDESC_VLANCTL_DATA));
                        m->m_flags |= M_VLANTAG;
                }
                RL_UNLOCK(sc);
                (*ifp->if_input)(ifp, m);
                RL_LOCK(sc);
                rx_npkts++;
        }

        /* Flush the RX DMA ring */

        bus_dmamap_sync(sc->rl_ldata.rl_rx_list_tag,
            sc->rl_ldata.rl_rx_list_map,
            BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);

        sc->rl_ldata.rl_rx_prodidx = i;

        if (rx_npktsp != NULL)
                *rx_npktsp = rx_npkts;
        if (maxpkt)
                return (EAGAIN);

        return (0);
}

static void
re_txeof(struct rl_softc *sc)
{
        struct ifnet            *ifp;
        struct rl_txdesc        *txd;
        u_int32_t               txstat;
        int                     cons;

        cons = sc->rl_ldata.rl_tx_considx;
        if (cons == sc->rl_ldata.rl_tx_prodidx)
                return;

        ifp = sc->rl_ifp;
#ifdef DEV_NETMAP
        if (netmap_tx_irq(ifp, 0 | (NETMAP_LOCKED_ENTER|NETMAP_LOCKED_EXIT)))
                return;
#endif /* DEV_NETMAP */
        /* Invalidate the TX descriptor list */
        bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
            sc->rl_ldata.rl_tx_list_map,
            BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);

        for (; cons != sc->rl_ldata.rl_tx_prodidx;
            cons = RL_TX_DESC_NXT(sc, cons)) {
                txstat = le32toh(sc->rl_ldata.rl_tx_list[cons].rl_cmdstat);
                if (txstat & RL_TDESC_STAT_OWN)
                        break;
                /*
                 * We only stash mbufs in the last descriptor
                 * in a fragment chain, which also happens to
                 * be the only place where the TX status bits
                 * are valid.
                 */
                if (txstat & RL_TDESC_CMD_EOF) {
                        txd = &sc->rl_ldata.rl_tx_desc[cons];
                        bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag,
                            txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
                        bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag,
                            txd->tx_dmamap);
                        KASSERT(txd->tx_m != NULL,
                            ("%s: freeing NULL mbufs!", __func__));
                        m_freem(txd->tx_m);
                        txd->tx_m = NULL;
                        if (txstat & (RL_TDESC_STAT_EXCESSCOL|
                            RL_TDESC_STAT_COLCNT))
                                ifp->if_collisions++;
                        if (txstat & RL_TDESC_STAT_TXERRSUM)
                                ifp->if_oerrors++;
                        else
                                ifp->if_opackets++;
                }
                sc->rl_ldata.rl_tx_free++;
                ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
        }
        sc->rl_ldata.rl_tx_considx = cons;

        /* No changes made to the TX ring, so no flush needed */

        if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt) {
#ifdef RE_TX_MODERATION
                /*
                 * If not all descriptors have been reaped yet, reload
                 * the timer so that we will eventually get another
                 * interrupt that will cause us to re-enter this routine.
                 * This is done in case the transmitter has gone idle.
                 */
                CSR_WRITE_4(sc, RL_TIMERCNT, 1);
#endif
        } else
                sc->rl_watchdog_timer = 0;
}

static void
re_tick(void *xsc)
{
        struct rl_softc         *sc;
        struct mii_data         *mii;

        sc = xsc;

        RL_LOCK_ASSERT(sc);

        mii = device_get_softc(sc->rl_miibus);
        mii_tick(mii);
        if ((sc->rl_flags & RL_FLAG_LINK) == 0)
                re_miibus_statchg(sc->rl_dev);
        /*
         * Reclaim transmitted frames here. Technically it is not
         * necessary to do here but it ensures periodic reclamation
         * regardless of Tx completion interrupt which seems to be
         * lost on PCIe based controllers under certain situations.
         */
        re_txeof(sc);
        re_watchdog(sc);
        callout_reset(&sc->rl_stat_callout, hz, re_tick, sc);
}

#ifdef DEVICE_POLLING
static int
re_poll(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
        struct rl_softc *sc = ifp->if_softc;
        int rx_npkts = 0;

        RL_LOCK(sc);
        if (ifp->if_drv_flags & IFF_DRV_RUNNING)
                rx_npkts = re_poll_locked(ifp, cmd, count);
        RL_UNLOCK(sc);
        return (rx_npkts);
}

static int
re_poll_locked(struct ifnet *ifp, enum poll_cmd cmd, int count)
{
        struct rl_softc *sc = ifp->if_softc;
        int rx_npkts;

        RL_LOCK_ASSERT(sc);

        sc->rxcycles = count;
        re_rxeof(sc, &rx_npkts);
        re_txeof(sc);

        if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                re_start_locked(ifp);

        if (cmd == POLL_AND_CHECK_STATUS) { /* also check status register */
                u_int16_t       status;

                status = CSR_READ_2(sc, RL_ISR);
                if (status == 0xffff)
                        return (rx_npkts);
                if (status)
                        CSR_WRITE_2(sc, RL_ISR, status);
                if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) &&
                    (sc->rl_flags & RL_FLAG_PCIE))
                        CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);

                /*
                 * XXX check behaviour on receiver stalls.
                 */

                if (status & RL_ISR_SYSTEM_ERR) {
                        ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
                        re_init_locked(sc);
                }
        }
        return (rx_npkts);
}
#endif /* DEVICE_POLLING */

static int
re_intr(void *arg)
{
        struct rl_softc         *sc;
        uint16_t                status;

        sc = arg;

        status = CSR_READ_2(sc, RL_ISR);
        if (status == 0xFFFF || (status & RL_INTRS_CPLUS) == 0)
                return (FILTER_STRAY);
        CSR_WRITE_2(sc, RL_IMR, 0);

        taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask);

        return (FILTER_HANDLED);
}

static void
re_int_task(void *arg, int npending)
{
        struct rl_softc         *sc;
        struct ifnet            *ifp;
        u_int16_t               status;
        int                     rval = 0;

        sc = arg;
        ifp = sc->rl_ifp;

        RL_LOCK(sc);

        status = CSR_READ_2(sc, RL_ISR);
        CSR_WRITE_2(sc, RL_ISR, status);

        if (sc->suspended ||
            (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
                RL_UNLOCK(sc);
                return;
        }

#ifdef DEVICE_POLLING
        if  (ifp->if_capenable & IFCAP_POLLING) {
                RL_UNLOCK(sc);
                return;
        }
#endif

        if (status & (RL_ISR_RX_OK|RL_ISR_RX_ERR|RL_ISR_FIFO_OFLOW))
                rval = re_rxeof(sc, NULL);

        /*
         * Some chips will ignore a second TX request issued
         * while an existing transmission is in progress. If
         * the transmitter goes idle but there are still
         * packets waiting to be sent, we need to restart the
         * channel here to flush them out. This only seems to
         * be required with the PCIe devices.
         */
        if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) &&
            (sc->rl_flags & RL_FLAG_PCIE))
                CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);
        if (status & (
#ifdef RE_TX_MODERATION
            RL_ISR_TIMEOUT_EXPIRED|
#else
            RL_ISR_TX_OK|
#endif
            RL_ISR_TX_ERR|RL_ISR_TX_DESC_UNAVAIL))
                re_txeof(sc);

        if (status & RL_ISR_SYSTEM_ERR) {
                ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
                re_init_locked(sc);
        }

        if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                re_start_locked(ifp);

        RL_UNLOCK(sc);

        if ((CSR_READ_2(sc, RL_ISR) & RL_INTRS_CPLUS) || rval) {
                taskqueue_enqueue_fast(taskqueue_fast, &sc->rl_inttask);
                return;
        }

        CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
}

static void
re_intr_msi(void *xsc)
{
        struct rl_softc         *sc;
        struct ifnet            *ifp;
        uint16_t                intrs, status;

        sc = xsc;
        RL_LOCK(sc);

        ifp = sc->rl_ifp;
#ifdef DEVICE_POLLING
        if (ifp->if_capenable & IFCAP_POLLING) {
                RL_UNLOCK(sc);
                return;
        }
#endif
        /* Disable interrupts. */
        CSR_WRITE_2(sc, RL_IMR, 0);
        if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
                RL_UNLOCK(sc);
                return;
        }

        intrs = RL_INTRS_CPLUS;
        status = CSR_READ_2(sc, RL_ISR);
        CSR_WRITE_2(sc, RL_ISR, status);
        if (sc->rl_int_rx_act > 0) {
                intrs &= ~(RL_ISR_RX_OK | RL_ISR_RX_ERR | RL_ISR_FIFO_OFLOW |
                    RL_ISR_RX_OVERRUN);
                status &= ~(RL_ISR_RX_OK | RL_ISR_RX_ERR | RL_ISR_FIFO_OFLOW |
                    RL_ISR_RX_OVERRUN);
        }

        if (status & (RL_ISR_TIMEOUT_EXPIRED | RL_ISR_RX_OK | RL_ISR_RX_ERR |
            RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN)) {
                re_rxeof(sc, NULL);
                if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
                        if (sc->rl_int_rx_mod != 0 &&
                            (status & (RL_ISR_RX_OK | RL_ISR_RX_ERR |
                            RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN)) != 0) {
                                /* Rearm one-shot timer. */
                                CSR_WRITE_4(sc, RL_TIMERCNT, 1);
                                intrs &= ~(RL_ISR_RX_OK | RL_ISR_RX_ERR |
                                    RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN);
                                sc->rl_int_rx_act = 1;
                        } else {
                                intrs |= RL_ISR_RX_OK | RL_ISR_RX_ERR |
                                    RL_ISR_FIFO_OFLOW | RL_ISR_RX_OVERRUN;
                                sc->rl_int_rx_act = 0;
                        }
                }
        }

        /*
         * Some chips will ignore a second TX request issued
         * while an existing transmission is in progress. If
         * the transmitter goes idle but there are still
         * packets waiting to be sent, we need to restart the
         * channel here to flush them out. This only seems to
         * be required with the PCIe devices.
         */
        if ((status & (RL_ISR_TX_OK | RL_ISR_TX_DESC_UNAVAIL)) &&
            (sc->rl_flags & RL_FLAG_PCIE))
                CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);
        if (status & (RL_ISR_TX_OK | RL_ISR_TX_ERR | RL_ISR_TX_DESC_UNAVAIL))
                re_txeof(sc);

        if (status & RL_ISR_SYSTEM_ERR) {
                ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
                re_init_locked(sc);
        }

        if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
                if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                        re_start_locked(ifp);
                CSR_WRITE_2(sc, RL_IMR, intrs);
        }
        RL_UNLOCK(sc);
}

static int
re_encap(struct rl_softc *sc, struct mbuf **m_head)
{
        struct rl_txdesc        *txd, *txd_last;
        bus_dma_segment_t       segs[RL_NTXSEGS];
        bus_dmamap_t            map;
        struct mbuf             *m_new;
        struct rl_desc          *desc;
        int                     nsegs, prod;
        int                     i, error, ei, si;
        int                     padlen;
        uint32_t                cmdstat, csum_flags, vlanctl;

        RL_LOCK_ASSERT(sc);
        M_ASSERTPKTHDR((*m_head));

        /*
         * With some of the RealTek chips, using the checksum offload
         * support in conjunction with the autopadding feature results
         * in the transmission of corrupt frames. For example, if we
         * need to send a really small IP fragment that's less than 60
         * bytes in size, and IP header checksumming is enabled, the
         * resulting ethernet frame that appears on the wire will
         * have garbled payload. To work around this, if TX IP checksum
         * offload is enabled, we always manually pad short frames out
         * to the minimum ethernet frame size.
         */
        if ((sc->rl_flags & RL_FLAG_AUTOPAD) == 0 &&
            (*m_head)->m_pkthdr.len < RL_IP4CSUMTX_PADLEN &&
            ((*m_head)->m_pkthdr.csum_flags & CSUM_IP) != 0) {
                padlen = RL_MIN_FRAMELEN - (*m_head)->m_pkthdr.len;
                if (M_WRITABLE(*m_head) == 0) {
                        /* Get a writable copy. */
                        m_new = m_dup(*m_head, M_NOWAIT);
                        m_freem(*m_head);
                        if (m_new == NULL) {
                                *m_head = NULL;
                                return (ENOBUFS);
                        }
                        *m_head = m_new;
                }
                if ((*m_head)->m_next != NULL ||
                    M_TRAILINGSPACE(*m_head) < padlen) {
                        m_new = m_defrag(*m_head, M_NOWAIT);
                        if (m_new == NULL) {
                                m_freem(*m_head);
                                *m_head = NULL;
                                return (ENOBUFS);
                        }
                } else
                        m_new = *m_head;

                /*
                 * Manually pad short frames, and zero the pad space
                 * to avoid leaking data.
                 */
                bzero(mtod(m_new, char *) + m_new->m_pkthdr.len, padlen);
                m_new->m_pkthdr.len += padlen;
                m_new->m_len = m_new->m_pkthdr.len;
                *m_head = m_new;
        }

        prod = sc->rl_ldata.rl_tx_prodidx;
        txd = &sc->rl_ldata.rl_tx_desc[prod];
        error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap,
            *m_head, segs, &nsegs, BUS_DMA_NOWAIT);
        if (error == EFBIG) {
                m_new = m_collapse(*m_head, M_NOWAIT, RL_NTXSEGS);
                if (m_new == NULL) {
                        m_freem(*m_head);
                        *m_head = NULL;
                        return (ENOBUFS);
                }
                *m_head = m_new;
                error = bus_dmamap_load_mbuf_sg(sc->rl_ldata.rl_tx_mtag,
                    txd->tx_dmamap, *m_head, segs, &nsegs, BUS_DMA_NOWAIT);
                if (error != 0) {
                        m_freem(*m_head);
                        *m_head = NULL;
                        return (error);
                }
        } else if (error != 0)
                return (error);
        if (nsegs == 0) {
                m_freem(*m_head);
                *m_head = NULL;
                return (EIO);
        }

        /* Check for number of available descriptors. */
        if (sc->rl_ldata.rl_tx_free - nsegs <= 1) {
                bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap);
                return (ENOBUFS);
        }

        bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag, txd->tx_dmamap,
            BUS_DMASYNC_PREWRITE);

        /*
         * Set up checksum offload. Note: checksum offload bits must
         * appear in all descriptors of a multi-descriptor transmit
         * attempt. This is according to testing done with an 8169
         * chip. This is a requirement.
         */
        vlanctl = 0;
        csum_flags = 0;
        if (((*m_head)->m_pkthdr.csum_flags & CSUM_TSO) != 0) {
                if ((sc->rl_flags & RL_FLAG_DESCV2) != 0) {
                        csum_flags |= RL_TDESC_CMD_LGSEND;
                        vlanctl |= ((uint32_t)(*m_head)->m_pkthdr.tso_segsz <<
                            RL_TDESC_CMD_MSSVALV2_SHIFT);
                } else {
                        csum_flags |= RL_TDESC_CMD_LGSEND |
                            ((uint32_t)(*m_head)->m_pkthdr.tso_segsz <<
                            RL_TDESC_CMD_MSSVAL_SHIFT);
                }
        } else {
                /*
                 * Unconditionally enable IP checksum if TCP or UDP
                 * checksum is required. Otherwise, TCP/UDP checksum
                 * does't make effects.
                 */
                if (((*m_head)->m_pkthdr.csum_flags & RE_CSUM_FEATURES) != 0) {
                        if ((sc->rl_flags & RL_FLAG_DESCV2) == 0) {
                                csum_flags |= RL_TDESC_CMD_IPCSUM;
                                if (((*m_head)->m_pkthdr.csum_flags &
                                    CSUM_TCP) != 0)
                                        csum_flags |= RL_TDESC_CMD_TCPCSUM;
                                if (((*m_head)->m_pkthdr.csum_flags &
                                    CSUM_UDP) != 0)
                                        csum_flags |= RL_TDESC_CMD_UDPCSUM;
                        } else {
                                vlanctl |= RL_TDESC_CMD_IPCSUMV2;
                                if (((*m_head)->m_pkthdr.csum_flags &
                                    CSUM_TCP) != 0)
                                        vlanctl |= RL_TDESC_CMD_TCPCSUMV2;
                                if (((*m_head)->m_pkthdr.csum_flags &
                                    CSUM_UDP) != 0)
                                        vlanctl |= RL_TDESC_CMD_UDPCSUMV2;
                        }
                }
        }

        /*
         * Set up hardware VLAN tagging. Note: vlan tag info must
         * appear in all descriptors of a multi-descriptor
         * transmission attempt.
         */
        if ((*m_head)->m_flags & M_VLANTAG)
                vlanctl |= bswap16((*m_head)->m_pkthdr.ether_vtag) |
                    RL_TDESC_VLANCTL_TAG;

        si = prod;
        for (i = 0; i < nsegs; i++, prod = RL_TX_DESC_NXT(sc, prod)) {
                desc = &sc->rl_ldata.rl_tx_list[prod];
                desc->rl_vlanctl = htole32(vlanctl);
                desc->rl_bufaddr_lo = htole32(RL_ADDR_LO(segs[i].ds_addr));
                desc->rl_bufaddr_hi = htole32(RL_ADDR_HI(segs[i].ds_addr));
                cmdstat = segs[i].ds_len;
                if (i != 0)
                        cmdstat |= RL_TDESC_CMD_OWN;
                if (prod == sc->rl_ldata.rl_tx_desc_cnt - 1)
                        cmdstat |= RL_TDESC_CMD_EOR;
                desc->rl_cmdstat = htole32(cmdstat | csum_flags);
                sc->rl_ldata.rl_tx_free--;
        }
        /* Update producer index. */
        sc->rl_ldata.rl_tx_prodidx = prod;

        /* Set EOF on the last descriptor. */
        ei = RL_TX_DESC_PRV(sc, prod);
        desc = &sc->rl_ldata.rl_tx_list[ei];
        desc->rl_cmdstat |= htole32(RL_TDESC_CMD_EOF);

        desc = &sc->rl_ldata.rl_tx_list[si];
        /* Set SOF and transfer ownership of packet to the chip. */
        desc->rl_cmdstat |= htole32(RL_TDESC_CMD_OWN | RL_TDESC_CMD_SOF);

        /*
         * Insure that the map for this transmission
         * is placed at the array index of the last descriptor
         * in this chain.  (Swap last and first dmamaps.)
         */
        txd_last = &sc->rl_ldata.rl_tx_desc[ei];
        map = txd->tx_dmamap;
        txd->tx_dmamap = txd_last->tx_dmamap;
        txd_last->tx_dmamap = map;
        txd_last->tx_m = *m_head;

        return (0);
}

static void
re_start(struct ifnet *ifp)
{
        struct rl_softc         *sc;

        sc = ifp->if_softc;
        RL_LOCK(sc);
        re_start_locked(ifp);
        RL_UNLOCK(sc);
}

/*
 * Main transmit routine for C+ and gigE NICs.
 */
static void
re_start_locked(struct ifnet *ifp)
{
        struct rl_softc         *sc;
        struct mbuf             *m_head;
        int                     queued;

        sc = ifp->if_softc;

#ifdef DEV_NETMAP
        /* XXX is this necessary ? */
        if (ifp->if_capenable & IFCAP_NETMAP) {
                struct netmap_kring *kring = &NA(ifp)->tx_rings[0];
                if (sc->rl_ldata.rl_tx_prodidx != kring->nr_hwcur) {
                        /* kick the tx unit */
                        CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);
#ifdef RE_TX_MODERATION
                        CSR_WRITE_4(sc, RL_TIMERCNT, 1);
#endif
                        sc->rl_watchdog_timer = 5;
                }
                return;
        }
#endif /* DEV_NETMAP */
        if ((ifp->if_drv_flags & (IFF_DRV_RUNNING | IFF_DRV_OACTIVE)) !=
            IFF_DRV_RUNNING || (sc->rl_flags & RL_FLAG_LINK) == 0)
                return;

        for (queued = 0; !IFQ_DRV_IS_EMPTY(&ifp->if_snd) &&
            sc->rl_ldata.rl_tx_free > 1;) {
                IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
                if (m_head == NULL)
                        break;

                if (re_encap(sc, &m_head) != 0) {
                        if (m_head == NULL)
                                break;
                        IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
                        ifp->if_drv_flags |= IFF_DRV_OACTIVE;
                        break;
                }

                /*
                 * If there's a BPF listener, bounce a copy of this frame
                 * to him.
                 */
                ETHER_BPF_MTAP(ifp, m_head);

                queued++;
        }

        if (queued == 0) {
#ifdef RE_TX_MODERATION
                if (sc->rl_ldata.rl_tx_free != sc->rl_ldata.rl_tx_desc_cnt)
                        CSR_WRITE_4(sc, RL_TIMERCNT, 1);
#endif
                return;
        }

        /* Flush the TX descriptors */

        bus_dmamap_sync(sc->rl_ldata.rl_tx_list_tag,
            sc->rl_ldata.rl_tx_list_map,
            BUS_DMASYNC_PREWRITE|BUS_DMASYNC_PREREAD);

        CSR_WRITE_1(sc, sc->rl_txstart, RL_TXSTART_START);

#ifdef RE_TX_MODERATION
        /*
         * Use the countdown timer for interrupt moderation.
         * 'TX done' interrupts are disabled. Instead, we reset the
         * countdown timer, which will begin counting until it hits
         * the value in the TIMERINT register, and then trigger an
         * interrupt. Each time we write to the TIMERCNT register,
         * the timer count is reset to 0.
         */
        CSR_WRITE_4(sc, RL_TIMERCNT, 1);
#endif

        /*
         * Set a timeout in case the chip goes out to lunch.
         */
        sc->rl_watchdog_timer = 5;
}

static void
re_set_jumbo(struct rl_softc *sc, int jumbo)
{

        if (sc->rl_hwrev->rl_rev == RL_HWREV_8168E_VL) {
                pci_set_max_read_req(sc->rl_dev, 4096);
                return;
        }

        CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG);
        if (jumbo != 0) {
                CSR_WRITE_1(sc, sc->rl_cfg3, CSR_READ_1(sc, sc->rl_cfg3) |
                    RL_CFG3_JUMBO_EN0);
                switch (sc->rl_hwrev->rl_rev) {
                case RL_HWREV_8168DP:
                        break;
                case RL_HWREV_8168E:
                        CSR_WRITE_1(sc, sc->rl_cfg4,
                            CSR_READ_1(sc, sc->rl_cfg4) | 0x01);
                        break;
                default:
                        CSR_WRITE_1(sc, sc->rl_cfg4,
                            CSR_READ_1(sc, sc->rl_cfg4) | RL_CFG4_JUMBO_EN1);
                }
        } else {
                CSR_WRITE_1(sc, sc->rl_cfg3, CSR_READ_1(sc, sc->rl_cfg3) &
                    ~RL_CFG3_JUMBO_EN0);
                switch (sc->rl_hwrev->rl_rev) {
                case RL_HWREV_8168DP:
                        break;
                case RL_HWREV_8168E:
                        CSR_WRITE_1(sc, sc->rl_cfg4,
                            CSR_READ_1(sc, sc->rl_cfg4) & ~0x01);
                        break;
                default:
                        CSR_WRITE_1(sc, sc->rl_cfg4,
                            CSR_READ_1(sc, sc->rl_cfg4) & ~RL_CFG4_JUMBO_EN1);
                }
        }
        CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);

        switch (sc->rl_hwrev->rl_rev) {
        case RL_HWREV_8168DP:
                pci_set_max_read_req(sc->rl_dev, 4096);
                break;
        default:
                if (jumbo != 0)
                        pci_set_max_read_req(sc->rl_dev, 512);
                else
                        pci_set_max_read_req(sc->rl_dev, 4096);
        }
}

static void
re_init(void *xsc)
{
        struct rl_softc         *sc = xsc;

        RL_LOCK(sc);
        re_init_locked(sc);
        RL_UNLOCK(sc);
}

static void
re_init_locked(struct rl_softc *sc)
{
        struct ifnet            *ifp = sc->rl_ifp;
        struct mii_data         *mii;
        uint32_t                reg;
        uint16_t                cfg;
        union {
                uint32_t align_dummy;
                u_char eaddr[ETHER_ADDR_LEN];
        } eaddr;

        RL_LOCK_ASSERT(sc);

        mii = device_get_softc(sc->rl_miibus);

        if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
                return;

        /*
         * Cancel pending I/O and free all RX/TX buffers.
         */
        re_stop(sc);

        /* Put controller into known state. */
        re_reset(sc);

        /*
         * For C+ mode, initialize the RX descriptors and mbufs.
         */
        if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) {
                if (ifp->if_mtu > RL_MTU) {
                        if (re_jrx_list_init(sc) != 0) {
                                device_printf(sc->rl_dev,
                                    "no memory for jumbo RX buffers\n");
                                re_stop(sc);
                                return;
                        }
                        /* Disable checksum offloading for jumbo frames. */
                        ifp->if_capenable &= ~(IFCAP_HWCSUM | IFCAP_TSO4);
                        ifp->if_hwassist &= ~(RE_CSUM_FEATURES | CSUM_TSO);
                } else {
                        if (re_rx_list_init(sc) != 0) {
                                device_printf(sc->rl_dev,
                                    "no memory for RX buffers\n");
                                re_stop(sc);
                                return;
                        }
                }
                re_set_jumbo(sc, ifp->if_mtu > RL_MTU);
        } else {
                if (re_rx_list_init(sc) != 0) {
                        device_printf(sc->rl_dev, "no memory for RX buffers\n");
                        re_stop(sc);
                        return;
                }
                if ((sc->rl_flags & RL_FLAG_PCIE) != 0 &&
                    pci_get_device(sc->rl_dev) != RT_DEVICEID_8101E) {
                        if (ifp->if_mtu > RL_MTU)
                                pci_set_max_read_req(sc->rl_dev, 512);
                        else
                                pci_set_max_read_req(sc->rl_dev, 4096);
                }
        }
        re_tx_list_init(sc);

        /*
         * Enable C+ RX and TX mode, as well as VLAN stripping and
         * RX checksum offload. We must configure the C+ register
         * before all others.
         */
        cfg = RL_CPLUSCMD_PCI_MRW;
        if ((ifp->if_capenable & IFCAP_RXCSUM) != 0)
                cfg |= RL_CPLUSCMD_RXCSUM_ENB;
        if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) != 0)
                cfg |= RL_CPLUSCMD_VLANSTRIP;
        if ((sc->rl_flags & RL_FLAG_MACSTAT) != 0) {
                cfg |= RL_CPLUSCMD_MACSTAT_DIS;
                /* XXX magic. */
                cfg |= 0x0001;
        } else
                cfg |= RL_CPLUSCMD_RXENB | RL_CPLUSCMD_TXENB;
        CSR_WRITE_2(sc, RL_CPLUS_CMD, cfg);
        if (sc->rl_hwrev->rl_rev == RL_HWREV_8169_8110SC ||
            sc->rl_hwrev->rl_rev == RL_HWREV_8169_8110SCE) {
                reg = 0x000fff00;
                if ((CSR_READ_1(sc, sc->rl_cfg2) & RL_CFG2_PCI66MHZ) != 0)
                        reg |= 0x000000ff;
                if (sc->rl_hwrev->rl_rev == RL_HWREV_8169_8110SCE)
                        reg |= 0x00f00000;
                CSR_WRITE_4(sc, 0x7c, reg);
                /* Disable interrupt mitigation. */
                CSR_WRITE_2(sc, 0xe2, 0);
        }
        /*
         * Disable TSO if interface MTU size is greater than MSS
         * allowed in controller.
         */
        if (ifp->if_mtu > RL_TSO_MTU && (ifp->if_capenable & IFCAP_TSO4) != 0) {
                ifp->if_capenable &= ~IFCAP_TSO4;
                ifp->if_hwassist &= ~CSUM_TSO;
        }

        /*
         * Init our MAC address.  Even though the chipset
         * documentation doesn't mention it, we need to enter "Config
         * register write enable" mode to modify the ID registers.
         */
        /* Copy MAC address on stack to align. */
        bcopy(IF_LLADDR(ifp), eaddr.eaddr, ETHER_ADDR_LEN);
        CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_WRITECFG);
        CSR_WRITE_4(sc, RL_IDR0,
            htole32(*(u_int32_t *)(&eaddr.eaddr[0])));
        CSR_WRITE_4(sc, RL_IDR4,
            htole32(*(u_int32_t *)(&eaddr.eaddr[4])));
        CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);

        /*
         * Load the addresses of the RX and TX lists into the chip.
         */

        CSR_WRITE_4(sc, RL_RXLIST_ADDR_HI,
            RL_ADDR_HI(sc->rl_ldata.rl_rx_list_addr));
        CSR_WRITE_4(sc, RL_RXLIST_ADDR_LO,
            RL_ADDR_LO(sc->rl_ldata.rl_rx_list_addr));

        CSR_WRITE_4(sc, RL_TXLIST_ADDR_HI,
            RL_ADDR_HI(sc->rl_ldata.rl_tx_list_addr));
        CSR_WRITE_4(sc, RL_TXLIST_ADDR_LO,
            RL_ADDR_LO(sc->rl_ldata.rl_tx_list_addr));

        /*
         * Enable transmit and receive.
         */
        CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB);

        /*
         * Set the initial TX configuration.
         */
        if (sc->rl_testmode) {
                if (sc->rl_type == RL_8169)
                        CSR_WRITE_4(sc, RL_TXCFG,
                            RL_TXCFG_CONFIG|RL_LOOPTEST_ON);
                else
                        CSR_WRITE_4(sc, RL_TXCFG,
                            RL_TXCFG_CONFIG|RL_LOOPTEST_ON_CPLUS);
        } else
                CSR_WRITE_4(sc, RL_TXCFG, RL_TXCFG_CONFIG);

        CSR_WRITE_1(sc, RL_EARLY_TX_THRESH, 16);

        /*
         * Set the initial RX configuration.
         */
        re_set_rxmode(sc);

        /* Configure interrupt moderation. */
        if (sc->rl_type == RL_8169) {
                /* Magic from vendor. */
                CSR_WRITE_2(sc, RL_INTRMOD, 0x5100);
        }

#ifdef DEVICE_POLLING
        /*
         * Disable interrupts if we are polling.
         */
        if (ifp->if_capenable & IFCAP_POLLING)
                CSR_WRITE_2(sc, RL_IMR, 0);
        else    /* otherwise ... */
#endif

        /*
         * Enable interrupts.
         */
        if (sc->rl_testmode)
                CSR_WRITE_2(sc, RL_IMR, 0);
        else
                CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
        CSR_WRITE_2(sc, RL_ISR, RL_INTRS_CPLUS);

        /* Set initial TX threshold */
        sc->rl_txthresh = RL_TX_THRESH_INIT;

        /* Start RX/TX process. */
        CSR_WRITE_4(sc, RL_MISSEDPKT, 0);
#ifdef notdef
        /* Enable receiver and transmitter. */
        CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_TX_ENB|RL_CMD_RX_ENB);
#endif

        /*
         * Initialize the timer interrupt register so that
         * a timer interrupt will be generated once the timer
         * reaches a certain number of ticks. The timer is
         * reloaded on each transmit.
         */
#ifdef RE_TX_MODERATION
        /*
         * Use timer interrupt register to moderate TX interrupt
         * moderation, which dramatically improves TX frame rate.
         */
        if (sc->rl_type == RL_8169)
                CSR_WRITE_4(sc, RL_TIMERINT_8169, 0x800);
        else
                CSR_WRITE_4(sc, RL_TIMERINT, 0x400);
#else
        /*
         * Use timer interrupt register to moderate RX interrupt
         * moderation.
         */
        if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) != 0 &&
            intr_filter == 0) {
                if (sc->rl_type == RL_8169)
                        CSR_WRITE_4(sc, RL_TIMERINT_8169,
                            RL_USECS(sc->rl_int_rx_mod));
        } else {
                if (sc->rl_type == RL_8169)
                        CSR_WRITE_4(sc, RL_TIMERINT_8169, RL_USECS(0));
        }
#endif

        /*
         * For 8169 gigE NICs, set the max allowed RX packet
         * size so we can receive jumbo frames.
         */
        if (sc->rl_type == RL_8169) {
                if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) {
                        /*
                         * For controllers that use new jumbo frame scheme,
                         * set maximum size of jumbo frame depedning on
                         * controller revisions.
                         */
                        if (ifp->if_mtu > RL_MTU)
                                CSR_WRITE_2(sc, RL_MAXRXPKTLEN,
                                    sc->rl_hwrev->rl_max_mtu +
                                    ETHER_VLAN_ENCAP_LEN + ETHER_HDR_LEN +
                                    ETHER_CRC_LEN);
                        else
                                CSR_WRITE_2(sc, RL_MAXRXPKTLEN,
                                    RE_RX_DESC_BUFLEN);
                } else if ((sc->rl_flags & RL_FLAG_PCIE) != 0 &&
                    sc->rl_hwrev->rl_max_mtu == RL_MTU) {
                        /* RTL810x has no jumbo frame support. */
                        CSR_WRITE_2(sc, RL_MAXRXPKTLEN, RE_RX_DESC_BUFLEN);
                } else
                        CSR_WRITE_2(sc, RL_MAXRXPKTLEN, 16383);
        }

        if (sc->rl_testmode)
                return;

        CSR_WRITE_1(sc, sc->rl_cfg1, CSR_READ_1(sc, sc->rl_cfg1) |
            RL_CFG1_DRVLOAD);

        ifp->if_drv_flags |= IFF_DRV_RUNNING;
        ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;

        sc->rl_flags &= ~RL_FLAG_LINK;
        mii_mediachg(mii);

        sc->rl_watchdog_timer = 0;
        callout_reset(&sc->rl_stat_callout, hz, re_tick, sc);
}

/*
 * Set media options.
 */
static int
re_ifmedia_upd(struct ifnet *ifp)
{
        struct rl_softc         *sc;
        struct mii_data         *mii;
        int                     error;

        sc = ifp->if_softc;
        mii = device_get_softc(sc->rl_miibus);
        RL_LOCK(sc);
        error = mii_mediachg(mii);
        RL_UNLOCK(sc);

        return (error);
}

/*
 * Report current media status.
 */
static void
re_ifmedia_sts(struct ifnet *ifp, struct ifmediareq *ifmr)
{
        struct rl_softc         *sc;
        struct mii_data         *mii;

        sc = ifp->if_softc;
        mii = device_get_softc(sc->rl_miibus);

        RL_LOCK(sc);
        mii_pollstat(mii);
        ifmr->ifm_active = mii->mii_media_active;
        ifmr->ifm_status = mii->mii_media_status;
        RL_UNLOCK(sc);
}

static int
re_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
{
        struct rl_softc         *sc = ifp->if_softc;
        struct ifreq            *ifr = (struct ifreq *) data;
        struct mii_data         *mii;
        uint32_t                rev;
        int                     error = 0;

        switch (command) {
        case SIOCSIFMTU:
                if (ifr->ifr_mtu < ETHERMIN ||
                    ifr->ifr_mtu > sc->rl_hwrev->rl_max_mtu) {
                        error = EINVAL;
                        break;
                }
                RL_LOCK(sc);
                if (ifp->if_mtu != ifr->ifr_mtu) {
                        ifp->if_mtu = ifr->ifr_mtu;
                        if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0 &&
                            (ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
                                ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
                                re_init_locked(sc);
                        }
                        if (ifp->if_mtu > RL_TSO_MTU &&
                            (ifp->if_capenable & IFCAP_TSO4) != 0) {
                                ifp->if_capenable &= ~(IFCAP_TSO4 |
                                    IFCAP_VLAN_HWTSO);
                                ifp->if_hwassist &= ~CSUM_TSO;
                        }
                        VLAN_CAPABILITIES(ifp);
                }
                RL_UNLOCK(sc);
                break;
        case SIOCSIFFLAGS:
                RL_LOCK(sc);
                if ((ifp->if_flags & IFF_UP) != 0) {
                        if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
                                if (((ifp->if_flags ^ sc->rl_if_flags)
                                    & (IFF_PROMISC | IFF_ALLMULTI)) != 0)
                                        re_set_rxmode(sc);
                        } else
                                re_init_locked(sc);
                } else {
                        if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
                                re_stop(sc);
                }
                sc->rl_if_flags = ifp->if_flags;
                RL_UNLOCK(sc);
                break;
        case SIOCADDMULTI:
        case SIOCDELMULTI:
                RL_LOCK(sc);
                if ((ifp->if_drv_flags & IFF_DRV_RUNNING) != 0)
                        re_set_rxmode(sc);
                RL_UNLOCK(sc);
                break;
        case SIOCGIFMEDIA:
        case SIOCSIFMEDIA:
                mii = device_get_softc(sc->rl_miibus);
                error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
                break;
        case SIOCSIFCAP:
            {
                int mask, reinit;

                mask = ifr->ifr_reqcap ^ ifp->if_capenable;
                reinit = 0;
#ifdef DEVICE_POLLING
                if (mask & IFCAP_POLLING) {
                        if (ifr->ifr_reqcap & IFCAP_POLLING) {
                                error = ether_poll_register(re_poll, ifp);
                                if (error)
                                        return (error);
                                RL_LOCK(sc);
                                /* Disable interrupts */
                                CSR_WRITE_2(sc, RL_IMR, 0x0000);
                                ifp->if_capenable |= IFCAP_POLLING;
                                RL_UNLOCK(sc);
                        } else {
                                error = ether_poll_deregister(ifp);
                                /* Enable interrupts. */
                                RL_LOCK(sc);
                                CSR_WRITE_2(sc, RL_IMR, RL_INTRS_CPLUS);
                                ifp->if_capenable &= ~IFCAP_POLLING;
                                RL_UNLOCK(sc);
                        }
                }
#endif /* DEVICE_POLLING */
                RL_LOCK(sc);
                if ((mask & IFCAP_TXCSUM) != 0 &&
                    (ifp->if_capabilities & IFCAP_TXCSUM) != 0) {
                        ifp->if_capenable ^= IFCAP_TXCSUM;
                        if ((ifp->if_capenable & IFCAP_TXCSUM) != 0) {
                                rev = sc->rl_hwrev->rl_rev;
                                if (rev == RL_HWREV_8168C ||
                                    rev == RL_HWREV_8168C_SPIN2 ||
                                    rev == RL_HWREV_8168CP)
                                        ifp->if_hwassist |= CSUM_TCP | CSUM_UDP;
                                else
                                        ifp->if_hwassist |= RE_CSUM_FEATURES;
                        } else
                                ifp->if_hwassist &= ~RE_CSUM_FEATURES;
                        reinit = 1;
                }
                if ((mask & IFCAP_RXCSUM) != 0 &&
                    (ifp->if_capabilities & IFCAP_RXCSUM) != 0) {
                        ifp->if_capenable ^= IFCAP_RXCSUM;
                        reinit = 1;
                }
                if ((mask & IFCAP_TSO4) != 0 &&
                    (ifp->if_capabilities & IFCAP_TSO4) != 0) {
                        ifp->if_capenable ^= IFCAP_TSO4;
                        if ((IFCAP_TSO4 & ifp->if_capenable) != 0)
                                ifp->if_hwassist |= CSUM_TSO;
                        else
                                ifp->if_hwassist &= ~CSUM_TSO;
                        if (ifp->if_mtu > RL_TSO_MTU &&
                            (ifp->if_capenable & IFCAP_TSO4) != 0) {
                                ifp->if_capenable &= ~IFCAP_TSO4;
                                ifp->if_hwassist &= ~CSUM_TSO;
                        }
                }
                if ((mask & IFCAP_VLAN_HWTSO) != 0 &&
                    (ifp->if_capabilities & IFCAP_VLAN_HWTSO) != 0)
                        ifp->if_capenable ^= IFCAP_VLAN_HWTSO;
                if ((mask & IFCAP_VLAN_HWTAGGING) != 0 &&
                    (ifp->if_capabilities & IFCAP_VLAN_HWTAGGING) != 0) {
                        ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
                        /* TSO over VLAN requires VLAN hardware tagging. */
                        if ((ifp->if_capenable & IFCAP_VLAN_HWTAGGING) == 0)
                                ifp->if_capenable &= ~IFCAP_VLAN_HWTSO;
                        reinit = 1;
                }
                if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0 &&
                    (mask & (IFCAP_HWCSUM | IFCAP_TSO4 |
                    IFCAP_VLAN_HWTSO)) != 0)
                                reinit = 1;
                if ((mask & IFCAP_WOL) != 0 &&
                    (ifp->if_capabilities & IFCAP_WOL) != 0) {
                        if ((mask & IFCAP_WOL_UCAST) != 0)
                                ifp->if_capenable ^= IFCAP_WOL_UCAST;
                        if ((mask & IFCAP_WOL_MCAST) != 0)
                                ifp->if_capenable ^= IFCAP_WOL_MCAST;
                        if ((mask & IFCAP_WOL_MAGIC) != 0)
                                ifp->if_capenable ^= IFCAP_WOL_MAGIC;
                }
                if (reinit && ifp->if_drv_flags & IFF_DRV_RUNNING) {
                        ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
                        re_init_locked(sc);
                }
                RL_UNLOCK(sc);
                VLAN_CAPABILITIES(ifp);
            }
                break;
        default:
                error = ether_ioctl(ifp, command, data);
                break;
        }

        return (error);
}

static void
re_watchdog(struct rl_softc *sc)
{
        struct ifnet            *ifp;

        RL_LOCK_ASSERT(sc);

        if (sc->rl_watchdog_timer == 0 || --sc->rl_watchdog_timer != 0)
                return;

        ifp = sc->rl_ifp;
        re_txeof(sc);
        if (sc->rl_ldata.rl_tx_free == sc->rl_ldata.rl_tx_desc_cnt) {
                if_printf(ifp, "watchdog timeout (missed Tx interrupts) "
                    "-- recovering\n");
                if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                        re_start_locked(ifp);
                return;
        }

        if_printf(ifp, "watchdog timeout\n");
        ifp->if_oerrors++;

        re_rxeof(sc, NULL);
        ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
        re_init_locked(sc);
        if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
                re_start_locked(ifp);
}

/*
 * Stop the adapter and free any mbufs allocated to the
 * RX and TX lists.
 */
static void
re_stop(struct rl_softc *sc)
{
        int                     i;
        struct ifnet            *ifp;
        struct rl_txdesc        *txd;
        struct rl_rxdesc        *rxd;

        RL_LOCK_ASSERT(sc);

        ifp = sc->rl_ifp;

        sc->rl_watchdog_timer = 0;
        callout_stop(&sc->rl_stat_callout);
        ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);

        /*
         * Disable accepting frames to put RX MAC into idle state.
         * Otherwise it's possible to get frames while stop command
         * execution is in progress and controller can DMA the frame
         * to already freed RX buffer during that period.
         */
        CSR_WRITE_4(sc, RL_RXCFG, CSR_READ_4(sc, RL_RXCFG) &
            ~(RL_RXCFG_RX_ALLPHYS | RL_RXCFG_RX_INDIV | RL_RXCFG_RX_MULTI |
            RL_RXCFG_RX_BROAD));

        if ((sc->rl_flags & RL_FLAG_WAIT_TXPOLL) != 0) {
                for (i = RL_TIMEOUT; i > 0; i--) {
                        if ((CSR_READ_1(sc, sc->rl_txstart) &
                            RL_TXSTART_START) == 0)
                                break;
                        DELAY(20);
                }
                if (i == 0)
                        device_printf(sc->rl_dev,
                            "stopping TX poll timed out!\n");
                CSR_WRITE_1(sc, RL_COMMAND, 0x00);
        } else if ((sc->rl_flags & RL_FLAG_CMDSTOP) != 0) {
                CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_STOPREQ | RL_CMD_TX_ENB |
                    RL_CMD_RX_ENB);
                if ((sc->rl_flags & RL_FLAG_CMDSTOP_WAIT_TXQ) != 0) {
                        for (i = RL_TIMEOUT; i > 0; i--) {
                                if ((CSR_READ_4(sc, RL_TXCFG) &
                                    RL_TXCFG_QUEUE_EMPTY) != 0)
                                        break;
                                DELAY(100);
                        }
                        if (i == 0)
                                device_printf(sc->rl_dev,
                                   "stopping TXQ timed out!\n");
                }
        } else
                CSR_WRITE_1(sc, RL_COMMAND, 0x00);
        DELAY(1000);
        CSR_WRITE_2(sc, RL_IMR, 0x0000);
        CSR_WRITE_2(sc, RL_ISR, 0xFFFF);

        if (sc->rl_head != NULL) {
                m_freem(sc->rl_head);
                sc->rl_head = sc->rl_tail = NULL;
        }

        /* Free the TX list buffers. */
        for (i = 0; i < sc->rl_ldata.rl_tx_desc_cnt; i++) {
                txd = &sc->rl_ldata.rl_tx_desc[i];
                if (txd->tx_m != NULL) {
                        bus_dmamap_sync(sc->rl_ldata.rl_tx_mtag,
                            txd->tx_dmamap, BUS_DMASYNC_POSTWRITE);
                        bus_dmamap_unload(sc->rl_ldata.rl_tx_mtag,
                            txd->tx_dmamap);
                        m_freem(txd->tx_m);
                        txd->tx_m = NULL;
                }
        }

        /* Free the RX list buffers. */
        for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                rxd = &sc->rl_ldata.rl_rx_desc[i];
                if (rxd->rx_m != NULL) {
                        bus_dmamap_sync(sc->rl_ldata.rl_rx_mtag,
                            rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
                        bus_dmamap_unload(sc->rl_ldata.rl_rx_mtag,
                            rxd->rx_dmamap);
                        m_freem(rxd->rx_m);
                        rxd->rx_m = NULL;
                }
        }

        if ((sc->rl_flags & RL_FLAG_JUMBOV2) != 0) {
                for (i = 0; i < sc->rl_ldata.rl_rx_desc_cnt; i++) {
                        rxd = &sc->rl_ldata.rl_jrx_desc[i];
                        if (rxd->rx_m != NULL) {
                                bus_dmamap_sync(sc->rl_ldata.rl_jrx_mtag,
                                    rxd->rx_dmamap, BUS_DMASYNC_POSTREAD);
                                bus_dmamap_unload(sc->rl_ldata.rl_jrx_mtag,
                                    rxd->rx_dmamap);
                                m_freem(rxd->rx_m);
                                rxd->rx_m = NULL;
                        }
                }
        }
}

/*
 * Device suspend routine.  Stop the interface and save some PCI
 * settings in case the BIOS doesn't restore them properly on
 * resume.
 */
static int
re_suspend(device_t dev)
{
        struct rl_softc         *sc;

        sc = device_get_softc(dev);

        RL_LOCK(sc);
        re_stop(sc);
        re_setwol(sc);
        sc->suspended = 1;
        RL_UNLOCK(sc);

        return (0);
}

/*
 * Device resume routine.  Restore some PCI settings in case the BIOS
 * doesn't, re-enable busmastering, and restart the interface if
 * appropriate.
 */
static int
re_resume(device_t dev)
{
        struct rl_softc         *sc;
        struct ifnet            *ifp;

        sc = device_get_softc(dev);

        RL_LOCK(sc);

        ifp = sc->rl_ifp;
        /* Take controller out of sleep mode. */
        if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) {
                if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80)
                        CSR_WRITE_1(sc, RL_GPIO,
                            CSR_READ_1(sc, RL_GPIO) | 0x01);
        }

        /*
         * Clear WOL matching such that normal Rx filtering
         * wouldn't interfere with WOL patterns.
         */
        re_clrwol(sc);

        /* reinitialize interface if necessary */
        if (ifp->if_flags & IFF_UP)
                re_init_locked(sc);

        sc->suspended = 0;
        RL_UNLOCK(sc);

        return (0);
}

/*
 * Stop all chip I/O so that the kernel's probe routines don't
 * get confused by errant DMAs when rebooting.
 */
static int
re_shutdown(device_t dev)
{
        struct rl_softc         *sc;

        sc = device_get_softc(dev);

        RL_LOCK(sc);
        re_stop(sc);
        /*
         * Mark interface as down since otherwise we will panic if
         * interrupt comes in later on, which can happen in some
         * cases.
         */
        sc->rl_ifp->if_flags &= ~IFF_UP;
        re_setwol(sc);
        RL_UNLOCK(sc);

        return (0);
}

static void
re_set_linkspeed(struct rl_softc *sc)
{
        struct mii_softc *miisc;
        struct mii_data *mii;
        int aneg, i, phyno;

        RL_LOCK_ASSERT(sc);

        mii = device_get_softc(sc->rl_miibus);
        mii_pollstat(mii);
        aneg = 0;
        if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID)) ==
            (IFM_ACTIVE | IFM_AVALID)) {
                switch IFM_SUBTYPE(mii->mii_media_active) {
                case IFM_10_T:
                case IFM_100_TX:
                        return;
                case IFM_1000_T:
                        aneg++;
                        break;
                default:
                        break;
                }
        }
        miisc = LIST_FIRST(&mii->mii_phys);
        phyno = miisc->mii_phy;
        LIST_FOREACH(miisc, &mii->mii_phys, mii_list)
                PHY_RESET(miisc);
        re_miibus_writereg(sc->rl_dev, phyno, MII_100T2CR, 0);
        re_miibus_writereg(sc->rl_dev, phyno,
            MII_ANAR, ANAR_TX_FD | ANAR_TX | ANAR_10_FD | ANAR_10 | ANAR_CSMA);
        re_miibus_writereg(sc->rl_dev, phyno,
            MII_BMCR, BMCR_AUTOEN | BMCR_STARTNEG);
        DELAY(1000);
        if (aneg != 0) {
                /*
                 * Poll link state until re(4) get a 10/100Mbps link.
                 */
                for (i = 0; i < MII_ANEGTICKS_GIGE; i++) {
                        mii_pollstat(mii);
                        if ((mii->mii_media_status & (IFM_ACTIVE | IFM_AVALID))
                            == (IFM_ACTIVE | IFM_AVALID)) {
                                switch (IFM_SUBTYPE(mii->mii_media_active)) {
                                case IFM_10_T:
                                case IFM_100_TX:
                                        return;
                                default:
                                        break;
                                }
                        }
                        RL_UNLOCK(sc);
                        pause("relnk", hz);
                        RL_LOCK(sc);
                }
                if (i == MII_ANEGTICKS_GIGE)
                        device_printf(sc->rl_dev,
                            "establishing a link failed, WOL may not work!");
        }
        /*
         * No link, force MAC to have 100Mbps, full-duplex link.
         * MAC does not require reprogramming on resolved speed/duplex,
         * so this is just for completeness.
         */
        mii->mii_media_status = IFM_AVALID | IFM_ACTIVE;
        mii->mii_media_active = IFM_ETHER | IFM_100_TX | IFM_FDX;
}

static void
re_setwol(struct rl_softc *sc)
{
        struct ifnet            *ifp;
        int                     pmc;
        uint16_t                pmstat;
        uint8_t                 v;

        RL_LOCK_ASSERT(sc);

        if (pci_find_cap(sc->rl_dev, PCIY_PMG, &pmc) != 0)
                return;

        ifp = sc->rl_ifp;
        /* Put controller into sleep mode. */
        if ((sc->rl_flags & RL_FLAG_MACSLEEP) != 0) {
                if ((CSR_READ_1(sc, RL_MACDBG) & 0x80) == 0x80)
                        CSR_WRITE_1(sc, RL_GPIO,
                            CSR_READ_1(sc, RL_GPIO) & ~0x01);
        }
        if ((ifp->if_capenable & IFCAP_WOL) != 0) {
                re_set_rxmode(sc);
                if ((sc->rl_flags & RL_FLAG_WOL_MANLINK) != 0)
                        re_set_linkspeed(sc);
                if ((sc->rl_flags & RL_FLAG_WOLRXENB) != 0)
                        CSR_WRITE_1(sc, RL_COMMAND, RL_CMD_RX_ENB);
        }
        /* Enable config register write. */
        CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);

        /* Enable PME. */
        v = CSR_READ_1(sc, sc->rl_cfg1);
        v &= ~RL_CFG1_PME;
        if ((ifp->if_capenable & IFCAP_WOL) != 0)
                v |= RL_CFG1_PME;
        CSR_WRITE_1(sc, sc->rl_cfg1, v);

        v = CSR_READ_1(sc, sc->rl_cfg3);
        v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC);
        if ((ifp->if_capenable & IFCAP_WOL_MAGIC) != 0)
                v |= RL_CFG3_WOL_MAGIC;
        CSR_WRITE_1(sc, sc->rl_cfg3, v);

        v = CSR_READ_1(sc, sc->rl_cfg5);
        v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST |
            RL_CFG5_WOL_LANWAKE);
        if ((ifp->if_capenable & IFCAP_WOL_UCAST) != 0)
                v |= RL_CFG5_WOL_UCAST;
        if ((ifp->if_capenable & IFCAP_WOL_MCAST) != 0)
                v |= RL_CFG5_WOL_MCAST | RL_CFG5_WOL_BCAST;
        if ((ifp->if_capenable & IFCAP_WOL) != 0)
                v |= RL_CFG5_WOL_LANWAKE;
        CSR_WRITE_1(sc, sc->rl_cfg5, v);

        /* Config register write done. */
        CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);

        if ((ifp->if_capenable & IFCAP_WOL) == 0 &&
            (sc->rl_flags & RL_FLAG_PHYWAKE_PM) != 0)
                CSR_WRITE_1(sc, RL_PMCH, CSR_READ_1(sc, RL_PMCH) & ~0x80);
        /*
         * It seems that hardware resets its link speed to 100Mbps in
         * power down mode so switching to 100Mbps in driver is not
         * needed.
         */

        /* Request PME if WOL is requested. */
        pmstat = pci_read_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, 2);
        pmstat &= ~(PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE);
        if ((ifp->if_capenable & IFCAP_WOL) != 0)
                pmstat |= PCIM_PSTAT_PME | PCIM_PSTAT_PMEENABLE;
        pci_write_config(sc->rl_dev, pmc + PCIR_POWER_STATUS, pmstat, 2);
}

static void
re_clrwol(struct rl_softc *sc)
{
        int                     pmc;
        uint8_t                 v;

        RL_LOCK_ASSERT(sc);

        if (pci_find_cap(sc->rl_dev, PCIY_PMG, &pmc) != 0)
                return;

        /* Enable config register write. */
        CSR_WRITE_1(sc, RL_EECMD, RL_EE_MODE);

        v = CSR_READ_1(sc, sc->rl_cfg3);
        v &= ~(RL_CFG3_WOL_LINK | RL_CFG3_WOL_MAGIC);
        CSR_WRITE_1(sc, sc->rl_cfg3, v);

        /* Config register write done. */
        CSR_WRITE_1(sc, RL_EECMD, RL_EEMODE_OFF);

        v = CSR_READ_1(sc, sc->rl_cfg5);
        v &= ~(RL_CFG5_WOL_BCAST | RL_CFG5_WOL_MCAST | RL_CFG5_WOL_UCAST);
        v &= ~RL_CFG5_WOL_LANWAKE;
        CSR_WRITE_1(sc, sc->rl_cfg5, v);
}

static void
re_add_sysctls(struct rl_softc *sc)
{
        struct sysctl_ctx_list  *ctx;
        struct sysctl_oid_list  *children;
        int                     error;

        ctx = device_get_sysctl_ctx(sc->rl_dev);
        children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->rl_dev));

        SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "stats",
            CTLTYPE_INT | CTLFLAG_RW, sc, 0, re_sysctl_stats, "I",
            "Statistics Information");
        if ((sc->rl_flags & (RL_FLAG_MSI | RL_FLAG_MSIX)) == 0)
                return;

        SYSCTL_ADD_PROC(ctx, children, OID_AUTO, "int_rx_mod",
            CTLTYPE_INT | CTLFLAG_RW, &sc->rl_int_rx_mod, 0,
            sysctl_hw_re_int_mod, "I", "re RX interrupt moderation");
        /* Pull in device tunables. */
        sc->rl_int_rx_mod = RL_TIMER_DEFAULT;
        error = resource_int_value(device_get_name(sc->rl_dev),
            device_get_unit(sc->rl_dev), "int_rx_mod", &sc->rl_int_rx_mod);
        if (error == 0) {
                if (sc->rl_int_rx_mod < RL_TIMER_MIN ||
                    sc->rl_int_rx_mod > RL_TIMER_MAX) {
                        device_printf(sc->rl_dev, "int_rx_mod value out of "
                            "range; using default: %d\n",
                            RL_TIMER_DEFAULT);
                        sc->rl_int_rx_mod = RL_TIMER_DEFAULT;
                }
        }

}

static int
re_sysctl_stats(SYSCTL_HANDLER_ARGS)
{
        struct rl_softc         *sc;
        struct rl_stats         *stats;
        int                     error, i, result;

        result = -1;
        error = sysctl_handle_int(oidp, &result, 0, req);
        if (error || req->newptr == NULL)
                return (error);

        if (result == 1) {
                sc = (struct rl_softc *)arg1;
                RL_LOCK(sc);
                if ((sc->rl_ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
                        RL_UNLOCK(sc);
                        goto done;
                }
                bus_dmamap_sync(sc->rl_ldata.rl_stag,
                    sc->rl_ldata.rl_smap, BUS_DMASYNC_PREREAD);
                CSR_WRITE_4(sc, RL_DUMPSTATS_HI,
                    RL_ADDR_HI(sc->rl_ldata.rl_stats_addr));
                CSR_WRITE_4(sc, RL_DUMPSTATS_LO,
                    RL_ADDR_LO(sc->rl_ldata.rl_stats_addr));
                CSR_WRITE_4(sc, RL_DUMPSTATS_LO,
                    RL_ADDR_LO(sc->rl_ldata.rl_stats_addr |
                    RL_DUMPSTATS_START));
                for (i = RL_TIMEOUT; i > 0; i--) {
                        if ((CSR_READ_4(sc, RL_DUMPSTATS_LO) &
                            RL_DUMPSTATS_START) == 0)
                                break;
                        DELAY(1000);
                }
                bus_dmamap_sync(sc->rl_ldata.rl_stag,
                    sc->rl_ldata.rl_smap, BUS_DMASYNC_POSTREAD);
                RL_UNLOCK(sc);
                if (i == 0) {
                        device_printf(sc->rl_dev,
                            "DUMP statistics request timedout\n");
                        return (ETIMEDOUT);
                }
done:
                stats = sc->rl_ldata.rl_stats;
                printf("%s statistics:\n", device_get_nameunit(sc->rl_dev));
                printf("Tx frames : %ju\n",
                    (uintmax_t)le64toh(stats->rl_tx_pkts));
                printf("Rx frames : %ju\n",
                    (uintmax_t)le64toh(stats->rl_rx_pkts));
                printf("Tx errors : %ju\n",
                    (uintmax_t)le64toh(stats->rl_tx_errs));
                printf("Rx errors : %u\n",
                    le32toh(stats->rl_rx_errs));
                printf("Rx missed frames : %u\n",
                    (uint32_t)le16toh(stats->rl_missed_pkts));
                printf("Rx frame alignment errs : %u\n",
                    (uint32_t)le16toh(stats->rl_rx_framealign_errs));
                printf("Tx single collisions : %u\n",
                    le32toh(stats->rl_tx_onecoll));
                printf("Tx multiple collisions : %u\n",
                    le32toh(stats->rl_tx_multicolls));
                printf("Rx unicast frames : %ju\n",
                    (uintmax_t)le64toh(stats->rl_rx_ucasts));
                printf("Rx broadcast frames : %ju\n",
                    (uintmax_t)le64toh(stats->rl_rx_bcasts));
                printf("Rx multicast frames : %u\n",
                    le32toh(stats->rl_rx_mcasts));
                printf("Tx aborts : %u\n",
                    (uint32_t)le16toh(stats->rl_tx_aborts));
                printf("Tx underruns : %u\n",
                    (uint32_t)le16toh(stats->rl_rx_underruns));
        }

        return (error);
}

static int
sysctl_int_range(SYSCTL_HANDLER_ARGS, int low, int high)
{
        int error, value;

        if (arg1 == NULL)
                return (EINVAL);
        value = *(int *)arg1;
        error = sysctl_handle_int(oidp, &value, 0, req);
        if (error || req->newptr == NULL)
                return (error);
        if (value < low || value > high)
                return (EINVAL);
        *(int *)arg1 = value;

        return (0);
}

static int
sysctl_hw_re_int_mod(SYSCTL_HANDLER_ARGS)
{

        return (sysctl_int_range(oidp, arg1, arg2, req, RL_TIMER_MIN,
            RL_TIMER_MAX));
}