1 /* $NetBSD: ucomvar.h,v 1.9 2001/01/23 21:56:17 augustss Exp $ */
5 * Copyright (c) 2001-2002, Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
11 * 1. Redistributions of source code must retain the above copyright
12 * notice, this list of conditions and the following disclaimer.
13 * 2. Redistributions in binary form must reproduce the above copyright
14 * notice, this list of conditions and the following disclaimer in the
15 * documentation and/or other materials provided with the distribution.
17 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
18 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
19 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
20 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
21 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
22 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
23 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
24 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
25 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
26 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31 * Copyright (c) 1999 The NetBSD Foundation, Inc.
32 * All rights reserved.
34 * This code is derived from software contributed to The NetBSD Foundation
35 * by Lennart Augustsson (lennart@augustsson.net) at
36 * Carlstedt Research & Technology.
38 * Redistribution and use in source and binary forms, with or without
39 * modification, are permitted provided that the following conditions
41 * 1. Redistributions of source code must retain the above copyright
42 * notice, this list of conditions and the following disclaimer.
43 * 2. Redistributions in binary form must reproduce the above copyright
44 * notice, this list of conditions and the following disclaimer in the
45 * documentation and/or other materials provided with the distribution.
46 * 3. All advertising materials mentioning features or use of this software
47 * must display the following acknowledgement:
48 * This product includes software developed by the NetBSD
49 * Foundation, Inc. and its contributors.
50 * 4. Neither the name of The NetBSD Foundation nor the names of its
51 * contributors may be used to endorse or promote products derived
52 * from this software without specific prior written permission.
54 * THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
55 * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
56 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
57 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
58 * BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
59 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
60 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
61 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
62 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
63 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
64 * POSSIBILITY OF SUCH DAMAGE.
67 #ifndef _USB_SERIAL_H_
68 #define _USB_SERIAL_H_
71 #include <sys/serial.h>
72 #include <sys/fcntl.h>
73 #include <sys/sysctl.h>
75 /* Module interface related macros */
79 #define UCOM_PREFVER UCOM_MODVER
81 #define UCOM_JITTERBUF_SIZE 128 /* bytes */
85 struct usb_device_request;
89 * NOTE: There is no guarantee that "ucom_cfg_close()" will
90 * be called after "ucom_cfg_open()" if the device is detached
93 struct ucom_callback {
94 void (*ucom_cfg_get_status) (struct ucom_softc *, uint8_t *plsr, uint8_t *pmsr);
95 void (*ucom_cfg_set_dtr) (struct ucom_softc *, uint8_t);
96 void (*ucom_cfg_set_rts) (struct ucom_softc *, uint8_t);
97 void (*ucom_cfg_set_break) (struct ucom_softc *, uint8_t);
98 void (*ucom_cfg_set_ring) (struct ucom_softc *, uint8_t);
99 void (*ucom_cfg_param) (struct ucom_softc *, struct termios *);
100 void (*ucom_cfg_open) (struct ucom_softc *);
101 void (*ucom_cfg_close) (struct ucom_softc *);
102 int (*ucom_pre_open) (struct ucom_softc *);
103 int (*ucom_pre_param) (struct ucom_softc *, struct termios *);
104 int (*ucom_ioctl) (struct ucom_softc *, uint32_t, caddr_t, int, struct thread *);
105 void (*ucom_start_read) (struct ucom_softc *);
106 void (*ucom_stop_read) (struct ucom_softc *);
107 void (*ucom_start_write) (struct ucom_softc *);
108 void (*ucom_stop_write) (struct ucom_softc *);
109 void (*ucom_tty_name) (struct ucom_softc *, char *pbuf, uint16_t buflen, uint16_t unit, uint16_t subunit);
110 void (*ucom_poll) (struct ucom_softc *);
111 void (*ucom_free) (struct ucom_softc *);
114 /* Line status register */
115 #define ULSR_RCV_FIFO 0x80
116 #define ULSR_TSRE 0x40 /* Transmitter empty: byte sent */
117 #define ULSR_TXRDY 0x20 /* Transmitter buffer empty */
118 #define ULSR_BI 0x10 /* Break detected */
119 #define ULSR_FE 0x08 /* Framing error: bad stop bit */
120 #define ULSR_PE 0x04 /* Parity error */
121 #define ULSR_OE 0x02 /* Overrun, lost incoming byte */
122 #define ULSR_RXRDY 0x01 /* Byte ready in Receive Buffer */
123 #define ULSR_RCV_MASK 0x1f /* Mask for incoming data or error */
125 struct ucom_cfg_task {
126 struct usb_proc_msg hdr;
127 struct ucom_softc *sc;
130 struct ucom_param_task {
131 struct usb_proc_msg hdr;
132 struct ucom_softc *sc;
133 struct termios termios_copy;
136 struct ucom_super_softc {
137 struct usb_process sc_tq;
141 int sc_flag; /* see UCOM_FLAG_XXX */
142 struct sysctl_oid *sc_sysctl_ttyname;
143 struct sysctl_oid *sc_sysctl_ttyports;
149 * NOTE: To avoid loosing level change information we use two
150 * tasks instead of one for all commands.
152 * Level changes are transitions like:
159 struct ucom_cfg_task sc_start_task[2];
160 struct ucom_cfg_task sc_open_task[2];
161 struct ucom_cfg_task sc_close_task[2];
162 struct ucom_cfg_task sc_line_state_task[2];
163 struct ucom_cfg_task sc_status_task[2];
164 struct ucom_param_task sc_param_task[2];
165 /* Used to set "UCOM_FLAG_GP_DATA" flag: */
166 struct usb_proc_msg *sc_last_start_xfer;
167 const struct ucom_callback *sc_callback;
168 struct ucom_super_softc *sc_super;
173 uint16_t sc_jitterbuf_in;
174 uint16_t sc_jitterbuf_out;
177 #define UCOM_FLAG_RTS_IFLOW 0x01 /* use RTS input flow control */
178 #define UCOM_FLAG_GONE 0x02 /* the device is gone */
179 #define UCOM_FLAG_ATTACHED 0x04 /* set if attached */
180 #define UCOM_FLAG_GP_DATA 0x08 /* set if get and put data is possible */
181 #define UCOM_FLAG_LL_READY 0x20 /* set if low layer is ready */
182 #define UCOM_FLAG_HL_READY 0x40 /* set if high layer is ready */
183 #define UCOM_FLAG_CONSOLE 0x80 /* set if device is a console */
184 #define UCOM_FLAG_WAIT_REFS 0x0100 /* set if we must wait for refs */
185 #define UCOM_FLAG_FREE_UNIT 0x0200 /* set if we must free the unit */
186 #define UCOM_FLAG_INWAKEUP 0x0400 /* set if we are in the tsw_inwakeup callback */
190 /* programmed line state bits */
191 uint8_t sc_pls_set; /* set bits */
192 uint8_t sc_pls_clr; /* cleared bits */
193 uint8_t sc_pls_curr; /* last state */
194 #define UCOM_LS_DTR 0x01
195 #define UCOM_LS_RTS 0x02
196 #define UCOM_LS_BREAK 0x04
197 #define UCOM_LS_RING 0x08
198 uint8_t sc_jitterbuf[UCOM_JITTERBUF_SIZE];
201 #define UCOM_MTX_ASSERT(sc, what) mtx_assert((sc)->sc_mtx, what)
202 #define UCOM_MTX_LOCK(sc) mtx_lock((sc)->sc_mtx)
203 #define UCOM_MTX_UNLOCK(sc) mtx_unlock((sc)->sc_mtx)
204 #define UCOM_UNLOAD_DRAIN(x) \
205 SYSUNINIT(var, SI_SUB_KLD - 3, SI_ORDER_ANY, ucom_drain_all, 0)
207 #define ucom_cfg_do_request(udev,com,req,ptr,flags,timo) \
208 usbd_do_request_proc(udev,&(com)->sc_super->sc_tq,req,ptr,flags,NULL,timo)
210 int ucom_attach(struct ucom_super_softc *,
211 struct ucom_softc *, int, void *,
212 const struct ucom_callback *callback, struct mtx *);
213 void ucom_detach(struct ucom_super_softc *, struct ucom_softc *);
214 void ucom_set_pnpinfo_usb(struct ucom_super_softc *, device_t);
215 void ucom_status_change(struct ucom_softc *);
216 uint8_t ucom_get_data(struct ucom_softc *, struct usb_page_cache *,
217 uint32_t, uint32_t, uint32_t *);
218 void ucom_put_data(struct ucom_softc *, struct usb_page_cache *,
220 uint8_t ucom_cfg_is_gone(struct ucom_softc *);
221 void ucom_drain(struct ucom_super_softc *);
222 void ucom_drain_all(void *);
223 void ucom_ref(struct ucom_super_softc *);
224 int ucom_unref(struct ucom_super_softc *);
225 #endif /* _USB_SERIAL_H_ */