]> CyberLeo.Net >> Repos - FreeBSD/releng/9.2.git/blob - sys/dev/usb/serial/uvscom.c
- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.
[FreeBSD/releng/9.2.git] / sys / dev / usb / serial / uvscom.c
1 /*      $NetBSD: usb/uvscom.c,v 1.1 2002/03/19 15:08:42 augustss Exp $  */
2
3 #include <sys/cdefs.h>
4 __FBSDID("$FreeBSD$");
5
6 /*-
7  * Copyright (c) 2001-2003, 2005 Shunsuke Akiyama <akiyama@jp.FreeBSD.org>.
8  * All rights reserved.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  *
19  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
20  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
21  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
22  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
23  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
24  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
25  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
26  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
27  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
28  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29  * SUCH DAMAGE.
30  *
31  */
32
33 /*
34  * uvscom: SUNTAC Slipper U VS-10U driver.
35  * Slipper U is a PC Card to USB converter for data communication card
36  * adapter.  It supports DDI Pocket's Air H" C@rd, C@rd H" 64, NTT's P-in,
37  * P-in m@ater and various data communication card adapters.
38  */
39
40 #include <sys/stdint.h>
41 #include <sys/stddef.h>
42 #include <sys/param.h>
43 #include <sys/queue.h>
44 #include <sys/types.h>
45 #include <sys/systm.h>
46 #include <sys/kernel.h>
47 #include <sys/bus.h>
48 #include <sys/module.h>
49 #include <sys/lock.h>
50 #include <sys/mutex.h>
51 #include <sys/condvar.h>
52 #include <sys/sysctl.h>
53 #include <sys/sx.h>
54 #include <sys/unistd.h>
55 #include <sys/callout.h>
56 #include <sys/malloc.h>
57 #include <sys/priv.h>
58
59 #include <dev/usb/usb.h>
60 #include <dev/usb/usbdi.h>
61 #include <dev/usb/usbdi_util.h>
62 #include "usbdevs.h"
63
64 #define USB_DEBUG_VAR uvscom_debug
65 #include <dev/usb/usb_debug.h>
66 #include <dev/usb/usb_process.h>
67
68 #include <dev/usb/serial/usb_serial.h>
69
70 #ifdef USB_DEBUG
71 static int uvscom_debug = 0;
72
73 static SYSCTL_NODE(_hw_usb, OID_AUTO, uvscom, CTLFLAG_RW, 0, "USB uvscom");
74 SYSCTL_INT(_hw_usb_uvscom, OID_AUTO, debug, CTLFLAG_RW,
75     &uvscom_debug, 0, "Debug level");
76 #endif
77
78 #define UVSCOM_MODVER           1       /* module version */
79
80 #define UVSCOM_CONFIG_INDEX     0
81 #define UVSCOM_IFACE_INDEX      0
82
83 /* Request */
84 #define UVSCOM_SET_SPEED        0x10
85 #define UVSCOM_LINE_CTL         0x11
86 #define UVSCOM_SET_PARAM        0x12
87 #define UVSCOM_READ_STATUS      0xd0
88 #define UVSCOM_SHUTDOWN         0xe0
89
90 /* UVSCOM_SET_SPEED parameters */
91 #define UVSCOM_SPEED_150BPS     0x00
92 #define UVSCOM_SPEED_300BPS     0x01
93 #define UVSCOM_SPEED_600BPS     0x02
94 #define UVSCOM_SPEED_1200BPS    0x03
95 #define UVSCOM_SPEED_2400BPS    0x04
96 #define UVSCOM_SPEED_4800BPS    0x05
97 #define UVSCOM_SPEED_9600BPS    0x06
98 #define UVSCOM_SPEED_19200BPS   0x07
99 #define UVSCOM_SPEED_38400BPS   0x08
100 #define UVSCOM_SPEED_57600BPS   0x09
101 #define UVSCOM_SPEED_115200BPS  0x0a
102
103 /* UVSCOM_LINE_CTL parameters */
104 #define UVSCOM_BREAK            0x40
105 #define UVSCOM_RTS              0x02
106 #define UVSCOM_DTR              0x01
107 #define UVSCOM_LINE_INIT        0x08
108
109 /* UVSCOM_SET_PARAM parameters */
110 #define UVSCOM_DATA_MASK        0x03
111 #define UVSCOM_DATA_BIT_8       0x03
112 #define UVSCOM_DATA_BIT_7       0x02
113 #define UVSCOM_DATA_BIT_6       0x01
114 #define UVSCOM_DATA_BIT_5       0x00
115
116 #define UVSCOM_STOP_MASK        0x04
117 #define UVSCOM_STOP_BIT_2       0x04
118 #define UVSCOM_STOP_BIT_1       0x00
119
120 #define UVSCOM_PARITY_MASK      0x18
121 #define UVSCOM_PARITY_EVEN      0x18
122 #define UVSCOM_PARITY_ODD       0x08
123 #define UVSCOM_PARITY_NONE      0x00
124
125 /* Status bits */
126 #define UVSCOM_TXRDY            0x04
127 #define UVSCOM_RXRDY            0x01
128
129 #define UVSCOM_DCD              0x08
130 #define UVSCOM_NOCARD           0x04
131 #define UVSCOM_DSR              0x02
132 #define UVSCOM_CTS              0x01
133 #define UVSCOM_USTAT_MASK       (UVSCOM_NOCARD | UVSCOM_DSR | UVSCOM_CTS)
134
135 #define UVSCOM_BULK_BUF_SIZE    1024    /* bytes */
136
137 enum {
138         UVSCOM_BULK_DT_WR,
139         UVSCOM_BULK_DT_RD,
140         UVSCOM_INTR_DT_RD,
141         UVSCOM_N_TRANSFER,
142 };
143
144 struct uvscom_softc {
145         struct ucom_super_softc sc_super_ucom;
146         struct ucom_softc sc_ucom;
147
148         struct usb_xfer *sc_xfer[UVSCOM_N_TRANSFER];
149         struct usb_device *sc_udev;
150         struct mtx sc_mtx;
151
152         uint16_t sc_line;               /* line control register */
153
154         uint8_t sc_iface_no;            /* interface number */
155         uint8_t sc_iface_index;         /* interface index */
156         uint8_t sc_lsr;                 /* local status register */
157         uint8_t sc_msr;                 /* uvscom status register */
158         uint8_t sc_unit_status;         /* unit status */
159 };
160
161 /* prototypes */
162
163 static device_probe_t uvscom_probe;
164 static device_attach_t uvscom_attach;
165 static device_detach_t uvscom_detach;
166 static void uvscom_free_softc(struct uvscom_softc *);
167
168 static usb_callback_t uvscom_write_callback;
169 static usb_callback_t uvscom_read_callback;
170 static usb_callback_t uvscom_intr_callback;
171
172 static void     uvscom_free(struct ucom_softc *);
173 static void     uvscom_cfg_set_dtr(struct ucom_softc *, uint8_t);
174 static void     uvscom_cfg_set_rts(struct ucom_softc *, uint8_t);
175 static void     uvscom_cfg_set_break(struct ucom_softc *, uint8_t);
176 static int      uvscom_pre_param(struct ucom_softc *, struct termios *);
177 static void     uvscom_cfg_param(struct ucom_softc *, struct termios *);
178 static int      uvscom_pre_open(struct ucom_softc *);
179 static void     uvscom_cfg_open(struct ucom_softc *);
180 static void     uvscom_cfg_close(struct ucom_softc *);
181 static void     uvscom_start_read(struct ucom_softc *);
182 static void     uvscom_stop_read(struct ucom_softc *);
183 static void     uvscom_start_write(struct ucom_softc *);
184 static void     uvscom_stop_write(struct ucom_softc *);
185 static void     uvscom_cfg_get_status(struct ucom_softc *, uint8_t *,
186                     uint8_t *);
187 static void     uvscom_cfg_write(struct uvscom_softc *, uint8_t, uint16_t);
188 static uint16_t uvscom_cfg_read_status(struct uvscom_softc *);
189 static void     uvscom_poll(struct ucom_softc *ucom);
190
191 static const struct usb_config uvscom_config[UVSCOM_N_TRANSFER] = {
192
193         [UVSCOM_BULK_DT_WR] = {
194                 .type = UE_BULK,
195                 .endpoint = UE_ADDR_ANY,
196                 .direction = UE_DIR_OUT,
197                 .bufsize = UVSCOM_BULK_BUF_SIZE,
198                 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
199                 .callback = &uvscom_write_callback,
200         },
201
202         [UVSCOM_BULK_DT_RD] = {
203                 .type = UE_BULK,
204                 .endpoint = UE_ADDR_ANY,
205                 .direction = UE_DIR_IN,
206                 .bufsize = UVSCOM_BULK_BUF_SIZE,
207                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
208                 .callback = &uvscom_read_callback,
209         },
210
211         [UVSCOM_INTR_DT_RD] = {
212                 .type = UE_INTERRUPT,
213                 .endpoint = UE_ADDR_ANY,
214                 .direction = UE_DIR_IN,
215                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
216                 .bufsize = 0,   /* use wMaxPacketSize */
217                 .callback = &uvscom_intr_callback,
218         },
219 };
220
221 static const struct ucom_callback uvscom_callback = {
222         .ucom_cfg_get_status = &uvscom_cfg_get_status,
223         .ucom_cfg_set_dtr = &uvscom_cfg_set_dtr,
224         .ucom_cfg_set_rts = &uvscom_cfg_set_rts,
225         .ucom_cfg_set_break = &uvscom_cfg_set_break,
226         .ucom_cfg_param = &uvscom_cfg_param,
227         .ucom_cfg_open = &uvscom_cfg_open,
228         .ucom_cfg_close = &uvscom_cfg_close,
229         .ucom_pre_open = &uvscom_pre_open,
230         .ucom_pre_param = &uvscom_pre_param,
231         .ucom_start_read = &uvscom_start_read,
232         .ucom_stop_read = &uvscom_stop_read,
233         .ucom_start_write = &uvscom_start_write,
234         .ucom_stop_write = &uvscom_stop_write,
235         .ucom_poll = &uvscom_poll,
236         .ucom_free = &uvscom_free,
237 };
238
239 static const STRUCT_USB_HOST_ID uvscom_devs[] = {
240         /* SUNTAC U-Cable type A4 */
241         {USB_VPI(USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_AS144L4, 0)},
242         /* SUNTAC U-Cable type D2 */
243         {USB_VPI(USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_DS96L, 0)},
244         /* SUNTAC Ir-Trinity */
245         {USB_VPI(USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_IS96U, 0)},
246         /* SUNTAC U-Cable type P1 */
247         {USB_VPI(USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_PS64P1, 0)},
248         /* SUNTAC Slipper U */
249         {USB_VPI(USB_VENDOR_SUNTAC, USB_PRODUCT_SUNTAC_VS10U, 0)},
250 };
251
252 static device_method_t uvscom_methods[] = {
253         DEVMETHOD(device_probe, uvscom_probe),
254         DEVMETHOD(device_attach, uvscom_attach),
255         DEVMETHOD(device_detach, uvscom_detach),
256         DEVMETHOD_END
257 };
258
259 static devclass_t uvscom_devclass;
260
261 static driver_t uvscom_driver = {
262         .name = "uvscom",
263         .methods = uvscom_methods,
264         .size = sizeof(struct uvscom_softc),
265 };
266
267 DRIVER_MODULE(uvscom, uhub, uvscom_driver, uvscom_devclass, NULL, 0);
268 MODULE_DEPEND(uvscom, ucom, 1, 1, 1);
269 MODULE_DEPEND(uvscom, usb, 1, 1, 1);
270 MODULE_VERSION(uvscom, UVSCOM_MODVER);
271
272 static int
273 uvscom_probe(device_t dev)
274 {
275         struct usb_attach_arg *uaa = device_get_ivars(dev);
276
277         if (uaa->usb_mode != USB_MODE_HOST) {
278                 return (ENXIO);
279         }
280         if (uaa->info.bConfigIndex != UVSCOM_CONFIG_INDEX) {
281                 return (ENXIO);
282         }
283         if (uaa->info.bIfaceIndex != UVSCOM_IFACE_INDEX) {
284                 return (ENXIO);
285         }
286         return (usbd_lookup_id_by_uaa(uvscom_devs, sizeof(uvscom_devs), uaa));
287 }
288
289 static int
290 uvscom_attach(device_t dev)
291 {
292         struct usb_attach_arg *uaa = device_get_ivars(dev);
293         struct uvscom_softc *sc = device_get_softc(dev);
294         int error;
295
296         device_set_usb_desc(dev);
297         mtx_init(&sc->sc_mtx, "uvscom", NULL, MTX_DEF);
298         ucom_ref(&sc->sc_super_ucom);
299
300         sc->sc_udev = uaa->device;
301
302         DPRINTF("sc=%p\n", sc);
303
304         sc->sc_iface_no = uaa->info.bIfaceNum;
305         sc->sc_iface_index = UVSCOM_IFACE_INDEX;
306
307         error = usbd_transfer_setup(uaa->device, &sc->sc_iface_index,
308             sc->sc_xfer, uvscom_config, UVSCOM_N_TRANSFER, sc, &sc->sc_mtx);
309
310         if (error) {
311                 DPRINTF("could not allocate all USB transfers!\n");
312                 goto detach;
313         }
314         sc->sc_line = UVSCOM_LINE_INIT;
315
316         /* clear stall at first run */
317         mtx_lock(&sc->sc_mtx);
318         usbd_xfer_set_stall(sc->sc_xfer[UVSCOM_BULK_DT_WR]);
319         usbd_xfer_set_stall(sc->sc_xfer[UVSCOM_BULK_DT_RD]);
320         mtx_unlock(&sc->sc_mtx);
321
322         error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
323             &uvscom_callback, &sc->sc_mtx);
324         if (error) {
325                 goto detach;
326         }
327         ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
328
329         /* start interrupt pipe */
330         mtx_lock(&sc->sc_mtx);
331         usbd_transfer_start(sc->sc_xfer[UVSCOM_INTR_DT_RD]);
332         mtx_unlock(&sc->sc_mtx);
333
334         return (0);
335
336 detach:
337         uvscom_detach(dev);
338         return (ENXIO);
339 }
340
341 static int
342 uvscom_detach(device_t dev)
343 {
344         struct uvscom_softc *sc = device_get_softc(dev);
345
346         DPRINTF("sc=%p\n", sc);
347
348         /* stop interrupt pipe */
349
350         if (sc->sc_xfer[UVSCOM_INTR_DT_RD])
351                 usbd_transfer_stop(sc->sc_xfer[UVSCOM_INTR_DT_RD]);
352
353         ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
354         usbd_transfer_unsetup(sc->sc_xfer, UVSCOM_N_TRANSFER);
355
356         device_claim_softc(dev);
357
358         uvscom_free_softc(sc);
359
360         return (0);
361 }
362
363 UCOM_UNLOAD_DRAIN(uvscom);
364
365 static void
366 uvscom_free_softc(struct uvscom_softc *sc)
367 {
368         if (ucom_unref(&sc->sc_super_ucom)) {
369                 mtx_destroy(&sc->sc_mtx);
370                 device_free_softc(sc);
371         }
372 }
373
374 static void
375 uvscom_free(struct ucom_softc *ucom)
376 {
377         uvscom_free_softc(ucom->sc_parent);
378 }
379
380 static void
381 uvscom_write_callback(struct usb_xfer *xfer, usb_error_t error)
382 {
383         struct uvscom_softc *sc = usbd_xfer_softc(xfer);
384         struct usb_page_cache *pc;
385         uint32_t actlen;
386
387         switch (USB_GET_STATE(xfer)) {
388         case USB_ST_SETUP:
389         case USB_ST_TRANSFERRED:
390 tr_setup:
391                 pc = usbd_xfer_get_frame(xfer, 0);
392                 if (ucom_get_data(&sc->sc_ucom, pc, 0,
393                     UVSCOM_BULK_BUF_SIZE, &actlen)) {
394
395                         usbd_xfer_set_frame_len(xfer, 0, actlen);
396                         usbd_transfer_submit(xfer);
397                 }
398                 return;
399
400         default:                        /* Error */
401                 if (error != USB_ERR_CANCELLED) {
402                         /* try to clear stall first */
403                         usbd_xfer_set_stall(xfer);
404                         goto tr_setup;
405                 }
406                 return;
407         }
408 }
409
410 static void
411 uvscom_read_callback(struct usb_xfer *xfer, usb_error_t error)
412 {
413         struct uvscom_softc *sc = usbd_xfer_softc(xfer);
414         struct usb_page_cache *pc;
415         int actlen;
416
417         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
418
419         switch (USB_GET_STATE(xfer)) {
420         case USB_ST_TRANSFERRED:
421                 pc = usbd_xfer_get_frame(xfer, 0);
422                 ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
423
424         case USB_ST_SETUP:
425 tr_setup:
426                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
427                 usbd_transfer_submit(xfer);
428                 return;
429
430         default:                        /* Error */
431                 if (error != USB_ERR_CANCELLED) {
432                         /* try to clear stall first */
433                         usbd_xfer_set_stall(xfer);
434                         goto tr_setup;
435                 }
436                 return;
437         }
438 }
439
440 static void
441 uvscom_intr_callback(struct usb_xfer *xfer, usb_error_t error)
442 {
443         struct uvscom_softc *sc = usbd_xfer_softc(xfer);
444         struct usb_page_cache *pc;
445         uint8_t buf[2];
446         int actlen;
447
448         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
449
450         switch (USB_GET_STATE(xfer)) {
451         case USB_ST_TRANSFERRED:
452                 if (actlen >= 2) {
453
454                         pc = usbd_xfer_get_frame(xfer, 0);
455                         usbd_copy_out(pc, 0, buf, sizeof(buf));
456
457                         sc->sc_lsr = 0;
458                         sc->sc_msr = 0;
459                         sc->sc_unit_status = buf[1];
460
461                         if (buf[0] & UVSCOM_TXRDY) {
462                                 sc->sc_lsr |= ULSR_TXRDY;
463                         }
464                         if (buf[0] & UVSCOM_RXRDY) {
465                                 sc->sc_lsr |= ULSR_RXRDY;
466                         }
467                         if (buf[1] & UVSCOM_CTS) {
468                                 sc->sc_msr |= SER_CTS;
469                         }
470                         if (buf[1] & UVSCOM_DSR) {
471                                 sc->sc_msr |= SER_DSR;
472                         }
473                         if (buf[1] & UVSCOM_DCD) {
474                                 sc->sc_msr |= SER_DCD;
475                         }
476                         /*
477                          * the UCOM layer will ignore this call if the TTY
478                          * device is closed!
479                          */
480                         ucom_status_change(&sc->sc_ucom);
481                 }
482         case USB_ST_SETUP:
483 tr_setup:
484                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
485                 usbd_transfer_submit(xfer);
486                 return;
487
488         default:                        /* Error */
489                 if (error != USB_ERR_CANCELLED) {
490                         /* try to clear stall first */
491                         usbd_xfer_set_stall(xfer);
492                         goto tr_setup;
493                 }
494                 return;
495         }
496 }
497
498 static void
499 uvscom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
500 {
501         struct uvscom_softc *sc = ucom->sc_parent;
502
503         DPRINTF("onoff = %d\n", onoff);
504
505         if (onoff)
506                 sc->sc_line |= UVSCOM_DTR;
507         else
508                 sc->sc_line &= ~UVSCOM_DTR;
509
510         uvscom_cfg_write(sc, UVSCOM_LINE_CTL, sc->sc_line);
511 }
512
513 static void
514 uvscom_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
515 {
516         struct uvscom_softc *sc = ucom->sc_parent;
517
518         DPRINTF("onoff = %d\n", onoff);
519
520         if (onoff)
521                 sc->sc_line |= UVSCOM_RTS;
522         else
523                 sc->sc_line &= ~UVSCOM_RTS;
524
525         uvscom_cfg_write(sc, UVSCOM_LINE_CTL, sc->sc_line);
526 }
527
528 static void
529 uvscom_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
530 {
531         struct uvscom_softc *sc = ucom->sc_parent;
532
533         DPRINTF("onoff = %d\n", onoff);
534
535         if (onoff)
536                 sc->sc_line |= UVSCOM_BREAK;
537         else
538                 sc->sc_line &= ~UVSCOM_BREAK;
539
540         uvscom_cfg_write(sc, UVSCOM_LINE_CTL, sc->sc_line);
541 }
542
543 static int
544 uvscom_pre_param(struct ucom_softc *ucom, struct termios *t)
545 {
546         switch (t->c_ospeed) {
547                 case B150:
548                 case B300:
549                 case B600:
550                 case B1200:
551                 case B2400:
552                 case B4800:
553                 case B9600:
554                 case B19200:
555                 case B38400:
556                 case B57600:
557                 case B115200:
558                 default:
559                 return (EINVAL);
560         }
561         return (0);
562 }
563
564 static void
565 uvscom_cfg_param(struct ucom_softc *ucom, struct termios *t)
566 {
567         struct uvscom_softc *sc = ucom->sc_parent;
568         uint16_t value;
569
570         DPRINTF("\n");
571
572         switch (t->c_ospeed) {
573         case B150:
574                 value = UVSCOM_SPEED_150BPS;
575                 break;
576         case B300:
577                 value = UVSCOM_SPEED_300BPS;
578                 break;
579         case B600:
580                 value = UVSCOM_SPEED_600BPS;
581                 break;
582         case B1200:
583                 value = UVSCOM_SPEED_1200BPS;
584                 break;
585         case B2400:
586                 value = UVSCOM_SPEED_2400BPS;
587                 break;
588         case B4800:
589                 value = UVSCOM_SPEED_4800BPS;
590                 break;
591         case B9600:
592                 value = UVSCOM_SPEED_9600BPS;
593                 break;
594         case B19200:
595                 value = UVSCOM_SPEED_19200BPS;
596                 break;
597         case B38400:
598                 value = UVSCOM_SPEED_38400BPS;
599                 break;
600         case B57600:
601                 value = UVSCOM_SPEED_57600BPS;
602                 break;
603         case B115200:
604                 value = UVSCOM_SPEED_115200BPS;
605                 break;
606         default:
607                 return;
608         }
609
610         uvscom_cfg_write(sc, UVSCOM_SET_SPEED, value);
611
612         value = 0;
613
614         if (t->c_cflag & CSTOPB) {
615                 value |= UVSCOM_STOP_BIT_2;
616         }
617         if (t->c_cflag & PARENB) {
618                 if (t->c_cflag & PARODD) {
619                         value |= UVSCOM_PARITY_ODD;
620                 } else {
621                         value |= UVSCOM_PARITY_EVEN;
622                 }
623         } else {
624                 value |= UVSCOM_PARITY_NONE;
625         }
626
627         switch (t->c_cflag & CSIZE) {
628         case CS5:
629                 value |= UVSCOM_DATA_BIT_5;
630                 break;
631         case CS6:
632                 value |= UVSCOM_DATA_BIT_6;
633                 break;
634         case CS7:
635                 value |= UVSCOM_DATA_BIT_7;
636                 break;
637         default:
638         case CS8:
639                 value |= UVSCOM_DATA_BIT_8;
640                 break;
641         }
642
643         uvscom_cfg_write(sc, UVSCOM_SET_PARAM, value);
644 }
645
646 static int
647 uvscom_pre_open(struct ucom_softc *ucom)
648 {
649         struct uvscom_softc *sc = ucom->sc_parent;
650
651         DPRINTF("sc = %p\n", sc);
652
653         /* check if PC card was inserted */
654
655         if (sc->sc_unit_status & UVSCOM_NOCARD) {
656                 DPRINTF("no PC card!\n");
657                 return (ENXIO);
658         }
659         return (0);
660 }
661
662 static void
663 uvscom_cfg_open(struct ucom_softc *ucom)
664 {
665         struct uvscom_softc *sc = ucom->sc_parent;
666
667         DPRINTF("sc = %p\n", sc);
668
669         uvscom_cfg_read_status(sc);
670 }
671
672 static void
673 uvscom_cfg_close(struct ucom_softc *ucom)
674 {
675         struct uvscom_softc *sc = ucom->sc_parent;
676
677         DPRINTF("sc=%p\n", sc);
678
679         uvscom_cfg_write(sc, UVSCOM_SHUTDOWN, 0);
680 }
681
682 static void
683 uvscom_start_read(struct ucom_softc *ucom)
684 {
685         struct uvscom_softc *sc = ucom->sc_parent;
686
687         usbd_transfer_start(sc->sc_xfer[UVSCOM_BULK_DT_RD]);
688 }
689
690 static void
691 uvscom_stop_read(struct ucom_softc *ucom)
692 {
693         struct uvscom_softc *sc = ucom->sc_parent;
694
695         usbd_transfer_stop(sc->sc_xfer[UVSCOM_BULK_DT_RD]);
696 }
697
698 static void
699 uvscom_start_write(struct ucom_softc *ucom)
700 {
701         struct uvscom_softc *sc = ucom->sc_parent;
702
703         usbd_transfer_start(sc->sc_xfer[UVSCOM_BULK_DT_WR]);
704 }
705
706 static void
707 uvscom_stop_write(struct ucom_softc *ucom)
708 {
709         struct uvscom_softc *sc = ucom->sc_parent;
710
711         usbd_transfer_stop(sc->sc_xfer[UVSCOM_BULK_DT_WR]);
712 }
713
714 static void
715 uvscom_cfg_get_status(struct ucom_softc *ucom, uint8_t *lsr, uint8_t *msr)
716 {
717         struct uvscom_softc *sc = ucom->sc_parent;
718
719         *lsr = sc->sc_lsr;
720         *msr = sc->sc_msr;
721 }
722
723 static void
724 uvscom_cfg_write(struct uvscom_softc *sc, uint8_t index, uint16_t value)
725 {
726         struct usb_device_request req;
727         usb_error_t err;
728
729         req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
730         req.bRequest = index;
731         USETW(req.wValue, value);
732         USETW(req.wIndex, 0);
733         USETW(req.wLength, 0);
734
735         err = ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 
736             &req, NULL, 0, 1000);
737         if (err) {
738                 DPRINTFN(0, "device request failed, err=%s "
739                     "(ignored)\n", usbd_errstr(err));
740         }
741 }
742
743 static uint16_t
744 uvscom_cfg_read_status(struct uvscom_softc *sc)
745 {
746         struct usb_device_request req;
747         usb_error_t err;
748         uint8_t data[2];
749
750         req.bmRequestType = UT_READ_VENDOR_DEVICE;
751         req.bRequest = UVSCOM_READ_STATUS;
752         USETW(req.wValue, 0);
753         USETW(req.wIndex, 0);
754         USETW(req.wLength, 2);
755
756         err = ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom, 
757             &req, data, 0, 1000);
758         if (err) {
759                 DPRINTFN(0, "device request failed, err=%s "
760                     "(ignored)\n", usbd_errstr(err));
761         }
762         return (data[0] | (data[1] << 8));
763 }
764
765 static void
766 uvscom_poll(struct ucom_softc *ucom)
767 {
768         struct uvscom_softc *sc = ucom->sc_parent;
769         usbd_transfer_poll(sc->sc_xfer, UVSCOM_N_TRANSFER);
770 }