3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
8 * 1. Redistributions of source code must retain the above copyright
9 * notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 * notice, this list of conditions and the following disclaimer in the
12 * documentation and/or other materials provided with the distribution.
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
27 #ifndef _USB_CONTROLLER_H_
28 #define _USB_CONTROLLER_H_
32 #define USB_BUS_DMA_TAG_MAX 8
34 /* structure prototypes */
39 struct usb_page_cache;
40 struct usb_setup_params;
41 struct usb_hw_ep_profile;
42 struct usb_fs_isoc_schedule;
43 struct usb_endpoint_descriptor;
47 typedef void (usb_bus_mem_sub_cb_t)(struct usb_bus *bus, struct usb_page_cache *pc, struct usb_page *pg, usb_size_t size, usb_size_t align);
48 typedef void (usb_bus_mem_cb_t)(struct usb_bus *bus, usb_bus_mem_sub_cb_t *scb);
51 * The following structure is used to define all the USB BUS
54 struct usb_bus_methods {
56 /* USB Device and Host mode - Mandatory */
58 usb_handle_req_t *roothub_exec;
60 void (*endpoint_init) (struct usb_device *,
61 struct usb_endpoint_descriptor *, struct usb_endpoint *);
62 void (*xfer_setup) (struct usb_setup_params *);
63 void (*xfer_unsetup) (struct usb_xfer *);
64 void (*get_dma_delay) (struct usb_device *, uint32_t *);
65 void (*device_suspend) (struct usb_device *);
66 void (*device_resume) (struct usb_device *);
67 void (*set_hw_power) (struct usb_bus *);
68 void (*set_hw_power_sleep) (struct usb_bus *, uint32_t);
70 * The following flag is set if one or more control transfers are
73 #define USB_HW_POWER_CONTROL 0x01
75 * The following flag is set if one or more bulk transfers are
78 #define USB_HW_POWER_BULK 0x02
80 * The following flag is set if one or more interrupt transfers are
83 #define USB_HW_POWER_INTERRUPT 0x04
85 * The following flag is set if one or more isochronous transfers
88 #define USB_HW_POWER_ISOC 0x08
90 * The following flag is set if one or more non-root-HUB devices
91 * are present on the given USB bus:
93 #define USB_HW_POWER_NON_ROOT_HUB 0x10
95 * The following flag is set if we are suspending
97 #define USB_HW_POWER_SUSPEND 0x20
99 * The following flag is set if we are resuming
101 #define USB_HW_POWER_RESUME 0x40
103 * The following flag is set if we are shutting down
105 #define USB_HW_POWER_SHUTDOWN 0x60
107 /* USB Device mode only - Mandatory */
109 void (*get_hw_ep_profile) (struct usb_device *udev, const struct usb_hw_ep_profile **ppf, uint8_t ep_addr);
110 void (*set_stall) (struct usb_device *udev, struct usb_xfer *xfer, struct usb_endpoint *ep, uint8_t *did_stall);
112 /* USB Device mode mandatory. USB Host mode optional. */
114 void (*clear_stall) (struct usb_device *udev, struct usb_endpoint *ep);
116 /* Optional transfer polling support */
118 void (*xfer_poll) (struct usb_bus *);
120 /* Optional fixed power mode support */
122 void (*get_power_mode) (struct usb_device *udev, int8_t *pmode);
124 /* Optional endpoint uninit */
126 void (*endpoint_uninit) (struct usb_device *, struct usb_endpoint *);
128 /* Optional device init */
130 usb_error_t (*device_init) (struct usb_device *);
132 /* Optional device uninit */
134 void (*device_uninit) (struct usb_device *);
136 /* Optional for device and host mode */
138 void (*start_dma_delay) (struct usb_xfer *);
140 void (*device_state_change) (struct usb_device *);
142 /* Optional for host mode */
144 usb_error_t (*set_address) (struct usb_device *, struct mtx *, uint16_t);
148 * The following structure is used to define all the USB pipe
151 struct usb_pipe_methods {
153 /* Mandatory USB Device and Host mode callbacks: */
155 void (*open)(struct usb_xfer *);
156 void (*close)(struct usb_xfer *);
158 void (*enter)(struct usb_xfer *);
159 void (*start)(struct usb_xfer *);
167 * The following structure keeps information about what a hardware USB
170 struct usb_hw_ep_profile {
171 uint16_t max_in_frame_size; /* IN-token direction */
172 uint16_t max_out_frame_size; /* OUT-token direction */
173 uint8_t is_simplex:1;
174 uint8_t support_multi_buffer:1;
175 uint8_t support_bulk:1;
176 uint8_t support_control:1;
177 uint8_t support_interrupt:1;
178 uint8_t support_isochronous:1;
179 uint8_t support_in:1; /* IN-token is supported */
180 uint8_t support_out:1; /* OUT-token is supported */
185 void usb_bus_mem_flush_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb);
186 uint8_t usb_bus_mem_alloc_all(struct usb_bus *bus, bus_dma_tag_t dmat, usb_bus_mem_cb_t *cb);
187 void usb_bus_mem_free_all(struct usb_bus *bus, usb_bus_mem_cb_t *cb);
188 uint16_t usb_isoc_time_expand(struct usb_bus *bus, uint16_t isoc_time_curr);
189 #if USB_HAVE_TT_SUPPORT
190 uint8_t usbd_fs_isoc_schedule_alloc_slot(struct usb_xfer *isoc_xfer, uint16_t isoc_time);
193 #endif /* _USB_CONTROLLER_H_ */