]> CyberLeo.Net >> Repos - FreeBSD/releng/9.2.git/blob - sys/dev/usb/usb_transfer.h
- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.
[FreeBSD/releng/9.2.git] / sys / dev / usb / usb_transfer.h
1 /* $FreeBSD$ */
2 /*-
3  * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  */
26
27 #ifndef _USB_TRANSFER_H_
28 #define _USB_TRANSFER_H_
29
30 /*
31  * The following structure defines the messages that is used to signal
32  * the "done_p" USB process.
33  */
34 struct usb_done_msg {
35         struct usb_proc_msg hdr;
36         struct usb_xfer_root *xroot;
37 };
38
39 #define USB_DMATAG_TO_XROOT(dpt)                                \
40   ((struct usb_xfer_root *)(                                    \
41    ((uint8_t *)(dpt)) -                                         \
42    ((uint8_t *)&((struct usb_xfer_root *)0)->dma_parent_tag)))
43
44 /*
45  * The following structure is used to keep information about memory
46  * that should be automatically freed at the moment all USB transfers
47  * have been freed.
48  */
49 struct usb_xfer_root {
50         struct usb_dma_parent_tag dma_parent_tag;
51 #if USB_HAVE_BUSDMA
52         struct usb_xfer_queue dma_q;
53 #endif
54         struct usb_xfer_queue done_q;
55         struct usb_done_msg done_m[2];
56         struct cv cv_drain;
57
58         struct usb_process *done_p;     /* pointer to callback process */
59         void   *memory_base;
60         struct mtx *xfer_mtx;   /* cannot be changed during operation */
61 #if USB_HAVE_BUSDMA
62         struct usb_page_cache *dma_page_cache_start;
63         struct usb_page_cache *dma_page_cache_end;
64 #endif
65         struct usb_page_cache *xfer_page_cache_start;
66         struct usb_page_cache *xfer_page_cache_end;
67         struct usb_bus *bus;            /* pointer to USB bus (cached) */
68         struct usb_device *udev;        /* pointer to USB device */
69
70         usb_size_t memory_size;
71         usb_size_t setup_refcount;
72 #if USB_HAVE_BUSDMA
73         usb_frcount_t dma_nframes;      /* number of page caches to load */
74         usb_frcount_t dma_currframe;    /* currect page cache number */
75         usb_frlength_t dma_frlength_0;  /* length of page cache zero */
76         uint8_t dma_error;              /* set if virtual memory could not be
77                                          * loaded */
78 #endif
79         uint8_t done_sleep;             /* set if done thread is sleeping */
80 };
81
82 /*
83  * The following structure is used when setting up an array of USB
84  * transfers.
85  */
86 struct usb_setup_params {
87         struct usb_dma_tag *dma_tag_p;
88         struct usb_page *dma_page_ptr;
89         struct usb_page_cache *dma_page_cache_ptr;      /* these will be
90                                                          * auto-freed */
91         struct usb_page_cache *xfer_page_cache_ptr;     /* these will not be
92                                                          * auto-freed */
93         struct usb_device *udev;
94         struct usb_xfer *curr_xfer;
95         const struct usb_config *curr_setup;
96         const struct usb_pipe_methods *methods;
97         void   *buf;
98         usb_frlength_t *xfer_length_ptr;
99
100         usb_size_t size[7];
101         usb_frlength_t bufsize;
102         usb_frlength_t bufsize_max;
103
104         uint32_t hc_max_frame_size;
105         uint16_t hc_max_packet_size;
106         uint8_t hc_max_packet_count;
107         enum usb_dev_speed speed;
108         uint8_t dma_tag_max;
109         usb_error_t err;
110 };
111
112 /* function prototypes */
113
114 uint8_t usbd_transfer_setup_sub_malloc(struct usb_setup_params *parm,
115             struct usb_page_cache **ppc, usb_size_t size, usb_size_t align,
116             usb_size_t count);
117 void    usb_dma_delay_done_cb(struct usb_xfer *);
118 void    usb_command_wrapper(struct usb_xfer_queue *pq,
119             struct usb_xfer *xfer);
120 void    usbd_pipe_enter(struct usb_xfer *xfer);
121 void    usbd_pipe_start(struct usb_xfer_queue *pq);
122 void    usbd_transfer_dequeue(struct usb_xfer *xfer);
123 void    usbd_transfer_done(struct usb_xfer *xfer, usb_error_t error);
124 void    usbd_transfer_enqueue(struct usb_xfer_queue *pq,
125             struct usb_xfer *xfer);
126 void    usbd_transfer_setup_sub(struct usb_setup_params *parm);
127 void    usbd_ctrl_transfer_setup(struct usb_device *udev);
128 void    usbd_clear_stall_locked(struct usb_device *udev,
129             struct usb_endpoint *ep);
130 void    usbd_clear_data_toggle(struct usb_device *udev,
131             struct usb_endpoint *ep);
132 usb_callback_t usbd_do_request_callback;
133 usb_callback_t usb_handle_request_callback;
134 usb_callback_t usb_do_clear_stall_callback;
135 void    usbd_transfer_timeout_ms(struct usb_xfer *xfer,
136             void (*cb) (void *arg), usb_timeout_t ms);
137 usb_timeout_t usbd_get_dma_delay(struct usb_device *udev);
138 void    usbd_transfer_power_ref(struct usb_xfer *xfer, int val);
139
140 #endif                                  /* _USB_TRANSFER_H_ */