]> CyberLeo.Net >> Repos - FreeBSD/releng/9.2.git/blob - sys/kern/kern_resource.c
- Copy stable/9 to releng/9.2 as part of the 9.2-RELEASE cycle.
[FreeBSD/releng/9.2.git] / sys / kern / kern_resource.c
1 /*-
2  * Copyright (c) 1982, 1986, 1991, 1993
3  *      The Regents of the University of California.  All rights reserved.
4  * (c) UNIX System Laboratories, Inc.
5  * All or some portions of this file are derived from material licensed
6  * to the University of California by American Telephone and Telegraph
7  * Co. or Unix System Laboratories, Inc. and are reproduced herein with
8  * the permission of UNIX System Laboratories, Inc.
9  *
10  * Redistribution and use in source and binary forms, with or without
11  * modification, are permitted provided that the following conditions
12  * are met:
13  * 1. Redistributions of source code must retain the above copyright
14  *    notice, this list of conditions and the following disclaimer.
15  * 2. Redistributions in binary form must reproduce the above copyright
16  *    notice, this list of conditions and the following disclaimer in the
17  *    documentation and/or other materials provided with the distribution.
18  * 4. Neither the name of the University nor the names of its contributors
19  *    may be used to endorse or promote products derived from this software
20  *    without specific prior written permission.
21  *
22  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
23  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
24  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
25  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
26  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
27  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
28  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
29  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
30  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
31  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
32  * SUCH DAMAGE.
33  *
34  *      @(#)kern_resource.c     8.5 (Berkeley) 1/21/94
35  */
36
37 #include <sys/cdefs.h>
38 __FBSDID("$FreeBSD$");
39
40 #include "opt_compat.h"
41
42 #include <sys/param.h>
43 #include <sys/systm.h>
44 #include <sys/sysproto.h>
45 #include <sys/file.h>
46 #include <sys/kernel.h>
47 #include <sys/lock.h>
48 #include <sys/malloc.h>
49 #include <sys/mutex.h>
50 #include <sys/priv.h>
51 #include <sys/proc.h>
52 #include <sys/refcount.h>
53 #include <sys/racct.h>
54 #include <sys/resourcevar.h>
55 #include <sys/rwlock.h>
56 #include <sys/sched.h>
57 #include <sys/sx.h>
58 #include <sys/syscallsubr.h>
59 #include <sys/sysctl.h>
60 #include <sys/sysent.h>
61 #include <sys/time.h>
62 #include <sys/umtx.h>
63
64 #include <vm/vm.h>
65 #include <vm/vm_param.h>
66 #include <vm/pmap.h>
67 #include <vm/vm_map.h>
68
69
70 static MALLOC_DEFINE(M_PLIMIT, "plimit", "plimit structures");
71 static MALLOC_DEFINE(M_UIDINFO, "uidinfo", "uidinfo structures");
72 #define UIHASH(uid)     (&uihashtbl[(uid) & uihash])
73 static struct rwlock uihashtbl_lock;
74 static LIST_HEAD(uihashhead, uidinfo) *uihashtbl;
75 static u_long uihash;           /* size of hash table - 1 */
76
77 static void     calcru1(struct proc *p, struct rusage_ext *ruxp,
78                     struct timeval *up, struct timeval *sp);
79 static int      donice(struct thread *td, struct proc *chgp, int n);
80 static struct uidinfo *uilookup(uid_t uid);
81 static void     ruxagg_locked(struct rusage_ext *rux, struct thread *td);
82
83 /*
84  * Resource controls and accounting.
85  */
86 #ifndef _SYS_SYSPROTO_H_
87 struct getpriority_args {
88         int     which;
89         int     who;
90 };
91 #endif
92 int
93 sys_getpriority(td, uap)
94         struct thread *td;
95         register struct getpriority_args *uap;
96 {
97         struct proc *p;
98         struct pgrp *pg;
99         int error, low;
100
101         error = 0;
102         low = PRIO_MAX + 1;
103         switch (uap->which) {
104
105         case PRIO_PROCESS:
106                 if (uap->who == 0)
107                         low = td->td_proc->p_nice;
108                 else {
109                         p = pfind(uap->who);
110                         if (p == NULL)
111                                 break;
112                         if (p_cansee(td, p) == 0)
113                                 low = p->p_nice;
114                         PROC_UNLOCK(p);
115                 }
116                 break;
117
118         case PRIO_PGRP:
119                 sx_slock(&proctree_lock);
120                 if (uap->who == 0) {
121                         pg = td->td_proc->p_pgrp;
122                         PGRP_LOCK(pg);
123                 } else {
124                         pg = pgfind(uap->who);
125                         if (pg == NULL) {
126                                 sx_sunlock(&proctree_lock);
127                                 break;
128                         }
129                 }
130                 sx_sunlock(&proctree_lock);
131                 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
132                         PROC_LOCK(p);
133                         if (p->p_state == PRS_NORMAL &&
134                             p_cansee(td, p) == 0) {
135                                 if (p->p_nice < low)
136                                         low = p->p_nice;
137                         }
138                         PROC_UNLOCK(p);
139                 }
140                 PGRP_UNLOCK(pg);
141                 break;
142
143         case PRIO_USER:
144                 if (uap->who == 0)
145                         uap->who = td->td_ucred->cr_uid;
146                 sx_slock(&allproc_lock);
147                 FOREACH_PROC_IN_SYSTEM(p) {
148                         PROC_LOCK(p);
149                         if (p->p_state == PRS_NORMAL &&
150                             p_cansee(td, p) == 0 &&
151                             p->p_ucred->cr_uid == uap->who) {
152                                 if (p->p_nice < low)
153                                         low = p->p_nice;
154                         }
155                         PROC_UNLOCK(p);
156                 }
157                 sx_sunlock(&allproc_lock);
158                 break;
159
160         default:
161                 error = EINVAL;
162                 break;
163         }
164         if (low == PRIO_MAX + 1 && error == 0)
165                 error = ESRCH;
166         td->td_retval[0] = low;
167         return (error);
168 }
169
170 #ifndef _SYS_SYSPROTO_H_
171 struct setpriority_args {
172         int     which;
173         int     who;
174         int     prio;
175 };
176 #endif
177 int
178 sys_setpriority(td, uap)
179         struct thread *td;
180         struct setpriority_args *uap;
181 {
182         struct proc *curp, *p;
183         struct pgrp *pg;
184         int found = 0, error = 0;
185
186         curp = td->td_proc;
187         switch (uap->which) {
188         case PRIO_PROCESS:
189                 if (uap->who == 0) {
190                         PROC_LOCK(curp);
191                         error = donice(td, curp, uap->prio);
192                         PROC_UNLOCK(curp);
193                 } else {
194                         p = pfind(uap->who);
195                         if (p == NULL)
196                                 break;
197                         error = p_cansee(td, p);
198                         if (error == 0)
199                                 error = donice(td, p, uap->prio);
200                         PROC_UNLOCK(p);
201                 }
202                 found++;
203                 break;
204
205         case PRIO_PGRP:
206                 sx_slock(&proctree_lock);
207                 if (uap->who == 0) {
208                         pg = curp->p_pgrp;
209                         PGRP_LOCK(pg);
210                 } else {
211                         pg = pgfind(uap->who);
212                         if (pg == NULL) {
213                                 sx_sunlock(&proctree_lock);
214                                 break;
215                         }
216                 }
217                 sx_sunlock(&proctree_lock);
218                 LIST_FOREACH(p, &pg->pg_members, p_pglist) {
219                         PROC_LOCK(p);
220                         if (p->p_state == PRS_NORMAL &&
221                             p_cansee(td, p) == 0) {
222                                 error = donice(td, p, uap->prio);
223                                 found++;
224                         }
225                         PROC_UNLOCK(p);
226                 }
227                 PGRP_UNLOCK(pg);
228                 break;
229
230         case PRIO_USER:
231                 if (uap->who == 0)
232                         uap->who = td->td_ucred->cr_uid;
233                 sx_slock(&allproc_lock);
234                 FOREACH_PROC_IN_SYSTEM(p) {
235                         PROC_LOCK(p);
236                         if (p->p_state == PRS_NORMAL &&
237                             p->p_ucred->cr_uid == uap->who &&
238                             p_cansee(td, p) == 0) {
239                                 error = donice(td, p, uap->prio);
240                                 found++;
241                         }
242                         PROC_UNLOCK(p);
243                 }
244                 sx_sunlock(&allproc_lock);
245                 break;
246
247         default:
248                 error = EINVAL;
249                 break;
250         }
251         if (found == 0 && error == 0)
252                 error = ESRCH;
253         return (error);
254 }
255
256 /*
257  * Set "nice" for a (whole) process.
258  */
259 static int
260 donice(struct thread *td, struct proc *p, int n)
261 {
262         int error;
263
264         PROC_LOCK_ASSERT(p, MA_OWNED);
265         if ((error = p_cansched(td, p)))
266                 return (error);
267         if (n > PRIO_MAX)
268                 n = PRIO_MAX;
269         if (n < PRIO_MIN)
270                 n = PRIO_MIN;
271         if (n < p->p_nice && priv_check(td, PRIV_SCHED_SETPRIORITY) != 0)
272                 return (EACCES);
273         sched_nice(p, n);
274         return (0);
275 }
276
277 static int unprivileged_idprio;
278 SYSCTL_INT(_security_bsd, OID_AUTO, unprivileged_idprio, CTLFLAG_RW,
279     &unprivileged_idprio, 0, "Allow non-root users to set an idle priority");
280
281 /*
282  * Set realtime priority for LWP.
283  */
284 #ifndef _SYS_SYSPROTO_H_
285 struct rtprio_thread_args {
286         int             function;
287         lwpid_t         lwpid;
288         struct rtprio   *rtp;
289 };
290 #endif
291 int
292 sys_rtprio_thread(struct thread *td, struct rtprio_thread_args *uap)
293 {
294         struct proc *p;
295         struct rtprio rtp;
296         struct thread *td1;
297         int cierror, error;
298
299         /* Perform copyin before acquiring locks if needed. */
300         if (uap->function == RTP_SET)
301                 cierror = copyin(uap->rtp, &rtp, sizeof(struct rtprio));
302         else
303                 cierror = 0;
304
305         if (uap->lwpid == 0 || uap->lwpid == td->td_tid) {
306                 p = td->td_proc;
307                 td1 = td;
308                 PROC_LOCK(p);
309         } else {
310                 /* Only look up thread in current process */
311                 td1 = tdfind(uap->lwpid, curproc->p_pid);
312                 if (td1 == NULL)
313                         return (ESRCH);
314                 p = td1->td_proc;
315         }
316
317         switch (uap->function) {
318         case RTP_LOOKUP:
319                 if ((error = p_cansee(td, p)))
320                         break;
321                 pri_to_rtp(td1, &rtp);
322                 PROC_UNLOCK(p);
323                 return (copyout(&rtp, uap->rtp, sizeof(struct rtprio)));
324         case RTP_SET:
325                 if ((error = p_cansched(td, p)) || (error = cierror))
326                         break;
327
328                 /* Disallow setting rtprio in most cases if not superuser. */
329
330                 /*
331                  * Realtime priority has to be restricted for reasons which
332                  * should be obvious.  However, for idleprio processes, there is
333                  * a potential for system deadlock if an idleprio process gains
334                  * a lock on a resource that other processes need (and the
335                  * idleprio process can't run due to a CPU-bound normal
336                  * process).  Fix me!  XXX
337                  *
338                  * This problem is not only related to idleprio process.
339                  * A user level program can obtain a file lock and hold it
340                  * indefinitely.  Additionally, without idleprio processes it is
341                  * still conceivable that a program with low priority will never
342                  * get to run.  In short, allowing this feature might make it
343                  * easier to lock a resource indefinitely, but it is not the
344                  * only thing that makes it possible.
345                  */
346                 if (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_REALTIME ||
347                     (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_IDLE &&
348                     unprivileged_idprio == 0)) {
349                         error = priv_check(td, PRIV_SCHED_RTPRIO);
350                         if (error)
351                                 break;
352                 }
353                 error = rtp_to_pri(&rtp, td1);
354                 break;
355         default:
356                 error = EINVAL;
357                 break;
358         }
359         PROC_UNLOCK(p);
360         return (error);
361 }
362
363 /*
364  * Set realtime priority.
365  */
366 #ifndef _SYS_SYSPROTO_H_
367 struct rtprio_args {
368         int             function;
369         pid_t           pid;
370         struct rtprio   *rtp;
371 };
372 #endif
373 int
374 sys_rtprio(td, uap)
375         struct thread *td;              /* curthread */
376         register struct rtprio_args *uap;
377 {
378         struct proc *p;
379         struct thread *tdp;
380         struct rtprio rtp;
381         int cierror, error;
382
383         /* Perform copyin before acquiring locks if needed. */
384         if (uap->function == RTP_SET)
385                 cierror = copyin(uap->rtp, &rtp, sizeof(struct rtprio));
386         else
387                 cierror = 0;
388
389         if (uap->pid == 0) {
390                 p = td->td_proc;
391                 PROC_LOCK(p);
392         } else {
393                 p = pfind(uap->pid);
394                 if (p == NULL)
395                         return (ESRCH);
396         }
397
398         switch (uap->function) {
399         case RTP_LOOKUP:
400                 if ((error = p_cansee(td, p)))
401                         break;
402                 /*
403                  * Return OUR priority if no pid specified,
404                  * or if one is, report the highest priority
405                  * in the process.  There isn't much more you can do as
406                  * there is only room to return a single priority.
407                  * Note: specifying our own pid is not the same
408                  * as leaving it zero.
409                  */
410                 if (uap->pid == 0) {
411                         pri_to_rtp(td, &rtp);
412                 } else {
413                         struct rtprio rtp2;
414
415                         rtp.type = RTP_PRIO_IDLE;
416                         rtp.prio = RTP_PRIO_MAX;
417                         FOREACH_THREAD_IN_PROC(p, tdp) {
418                                 pri_to_rtp(tdp, &rtp2);
419                                 if (rtp2.type <  rtp.type ||
420                                     (rtp2.type == rtp.type &&
421                                     rtp2.prio < rtp.prio)) {
422                                         rtp.type = rtp2.type;
423                                         rtp.prio = rtp2.prio;
424                                 }
425                         }
426                 }
427                 PROC_UNLOCK(p);
428                 return (copyout(&rtp, uap->rtp, sizeof(struct rtprio)));
429         case RTP_SET:
430                 if ((error = p_cansched(td, p)) || (error = cierror))
431                         break;
432
433                 /*
434                  * Disallow setting rtprio in most cases if not superuser.
435                  * See the comment in sys_rtprio_thread about idprio
436                  * threads holding a lock.
437                  */
438                 if (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_REALTIME ||
439                     (RTP_PRIO_BASE(rtp.type) == RTP_PRIO_IDLE &&
440                     !unprivileged_idprio)) {
441                         error = priv_check(td, PRIV_SCHED_RTPRIO);
442                         if (error)
443                                 break;
444                 }
445
446                 /*
447                  * If we are setting our own priority, set just our
448                  * thread but if we are doing another process,
449                  * do all the threads on that process. If we
450                  * specify our own pid we do the latter.
451                  */
452                 if (uap->pid == 0) {
453                         error = rtp_to_pri(&rtp, td);
454                 } else {
455                         FOREACH_THREAD_IN_PROC(p, td) {
456                                 if ((error = rtp_to_pri(&rtp, td)) != 0)
457                                         break;
458                         }
459                 }
460                 break;
461         default:
462                 error = EINVAL;
463                 break;
464         }
465         PROC_UNLOCK(p);
466         return (error);
467 }
468
469 int
470 rtp_to_pri(struct rtprio *rtp, struct thread *td)
471 {
472         u_char  newpri;
473         u_char  oldpri;
474
475         switch (RTP_PRIO_BASE(rtp->type)) {
476         case RTP_PRIO_REALTIME:
477                 if (rtp->prio > RTP_PRIO_MAX)
478                         return (EINVAL);
479                 newpri = PRI_MIN_REALTIME + rtp->prio;
480                 break;
481         case RTP_PRIO_NORMAL:
482                 if (rtp->prio > (PRI_MAX_TIMESHARE - PRI_MIN_TIMESHARE))
483                         return (EINVAL);
484                 newpri = PRI_MIN_TIMESHARE + rtp->prio;
485                 break;
486         case RTP_PRIO_IDLE:
487                 if (rtp->prio > RTP_PRIO_MAX)
488                         return (EINVAL);
489                 newpri = PRI_MIN_IDLE + rtp->prio;
490                 break;
491         default:
492                 return (EINVAL);
493         }
494
495         thread_lock(td);
496         sched_class(td, rtp->type);     /* XXX fix */
497         oldpri = td->td_user_pri;
498         sched_user_prio(td, newpri);
499         if (td->td_user_pri != oldpri && (td == curthread ||
500             td->td_priority == oldpri || td->td_user_pri <= PRI_MAX_REALTIME))
501                 sched_prio(td, td->td_user_pri);
502         if (TD_ON_UPILOCK(td) && oldpri != newpri) {
503                 critical_enter();
504                 thread_unlock(td);
505                 umtx_pi_adjust(td, oldpri);
506                 critical_exit();
507         } else
508                 thread_unlock(td);
509         return (0);
510 }
511
512 void
513 pri_to_rtp(struct thread *td, struct rtprio *rtp)
514 {
515
516         thread_lock(td);
517         switch (PRI_BASE(td->td_pri_class)) {
518         case PRI_REALTIME:
519                 rtp->prio = td->td_base_user_pri - PRI_MIN_REALTIME;
520                 break;
521         case PRI_TIMESHARE:
522                 rtp->prio = td->td_base_user_pri - PRI_MIN_TIMESHARE;
523                 break;
524         case PRI_IDLE:
525                 rtp->prio = td->td_base_user_pri - PRI_MIN_IDLE;
526                 break;
527         default:
528                 break;
529         }
530         rtp->type = td->td_pri_class;
531         thread_unlock(td);
532 }
533
534 #if defined(COMPAT_43)
535 #ifndef _SYS_SYSPROTO_H_
536 struct osetrlimit_args {
537         u_int   which;
538         struct  orlimit *rlp;
539 };
540 #endif
541 int
542 osetrlimit(td, uap)
543         struct thread *td;
544         register struct osetrlimit_args *uap;
545 {
546         struct orlimit olim;
547         struct rlimit lim;
548         int error;
549
550         if ((error = copyin(uap->rlp, &olim, sizeof(struct orlimit))))
551                 return (error);
552         lim.rlim_cur = olim.rlim_cur;
553         lim.rlim_max = olim.rlim_max;
554         error = kern_setrlimit(td, uap->which, &lim);
555         return (error);
556 }
557
558 #ifndef _SYS_SYSPROTO_H_
559 struct ogetrlimit_args {
560         u_int   which;
561         struct  orlimit *rlp;
562 };
563 #endif
564 int
565 ogetrlimit(td, uap)
566         struct thread *td;
567         register struct ogetrlimit_args *uap;
568 {
569         struct orlimit olim;
570         struct rlimit rl;
571         struct proc *p;
572         int error;
573
574         if (uap->which >= RLIM_NLIMITS)
575                 return (EINVAL);
576         p = td->td_proc;
577         PROC_LOCK(p);
578         lim_rlimit(p, uap->which, &rl);
579         PROC_UNLOCK(p);
580
581         /*
582          * XXX would be more correct to convert only RLIM_INFINITY to the
583          * old RLIM_INFINITY and fail with EOVERFLOW for other larger
584          * values.  Most 64->32 and 32->16 conversions, including not
585          * unimportant ones of uids are even more broken than what we
586          * do here (they blindly truncate).  We don't do this correctly
587          * here since we have little experience with EOVERFLOW yet.
588          * Elsewhere, getuid() can't fail...
589          */
590         olim.rlim_cur = rl.rlim_cur > 0x7fffffff ? 0x7fffffff : rl.rlim_cur;
591         olim.rlim_max = rl.rlim_max > 0x7fffffff ? 0x7fffffff : rl.rlim_max;
592         error = copyout(&olim, uap->rlp, sizeof(olim));
593         return (error);
594 }
595 #endif /* COMPAT_43 */
596
597 #ifndef _SYS_SYSPROTO_H_
598 struct __setrlimit_args {
599         u_int   which;
600         struct  rlimit *rlp;
601 };
602 #endif
603 int
604 sys_setrlimit(td, uap)
605         struct thread *td;
606         register struct __setrlimit_args *uap;
607 {
608         struct rlimit alim;
609         int error;
610
611         if ((error = copyin(uap->rlp, &alim, sizeof(struct rlimit))))
612                 return (error);
613         error = kern_setrlimit(td, uap->which, &alim);
614         return (error);
615 }
616
617 static void
618 lim_cb(void *arg)
619 {
620         struct rlimit rlim;
621         struct thread *td;
622         struct proc *p;
623
624         p = arg;
625         PROC_LOCK_ASSERT(p, MA_OWNED);
626         /*
627          * Check if the process exceeds its cpu resource allocation.  If
628          * it reaches the max, arrange to kill the process in ast().
629          */
630         if (p->p_cpulimit == RLIM_INFINITY)
631                 return;
632         PROC_SLOCK(p);
633         FOREACH_THREAD_IN_PROC(p, td) {
634                 ruxagg(p, td);
635         }
636         PROC_SUNLOCK(p);
637         if (p->p_rux.rux_runtime > p->p_cpulimit * cpu_tickrate()) {
638                 lim_rlimit(p, RLIMIT_CPU, &rlim);
639                 if (p->p_rux.rux_runtime >= rlim.rlim_max * cpu_tickrate()) {
640                         killproc(p, "exceeded maximum CPU limit");
641                 } else {
642                         if (p->p_cpulimit < rlim.rlim_max)
643                                 p->p_cpulimit += 5;
644                         kern_psignal(p, SIGXCPU);
645                 }
646         }
647         if ((p->p_flag & P_WEXIT) == 0)
648                 callout_reset(&p->p_limco, hz, lim_cb, p);
649 }
650
651 int
652 kern_setrlimit(struct thread *td, u_int which, struct rlimit *limp)
653 {
654
655         return (kern_proc_setrlimit(td, td->td_proc, which, limp));
656 }
657
658 int
659 kern_proc_setrlimit(struct thread *td, struct proc *p, u_int which,
660     struct rlimit *limp)
661 {
662         struct plimit *newlim, *oldlim;
663         register struct rlimit *alimp;
664         struct rlimit oldssiz;
665         int error;
666
667         if (which >= RLIM_NLIMITS)
668                 return (EINVAL);
669
670         /*
671          * Preserve historical bugs by treating negative limits as unsigned.
672          */
673         if (limp->rlim_cur < 0)
674                 limp->rlim_cur = RLIM_INFINITY;
675         if (limp->rlim_max < 0)
676                 limp->rlim_max = RLIM_INFINITY;
677
678         oldssiz.rlim_cur = 0;
679         newlim = lim_alloc();
680         PROC_LOCK(p);
681         oldlim = p->p_limit;
682         alimp = &oldlim->pl_rlimit[which];
683         if (limp->rlim_cur > alimp->rlim_max ||
684             limp->rlim_max > alimp->rlim_max)
685                 if ((error = priv_check(td, PRIV_PROC_SETRLIMIT))) {
686                         PROC_UNLOCK(p);
687                         lim_free(newlim);
688                         return (error);
689                 }
690         if (limp->rlim_cur > limp->rlim_max)
691                 limp->rlim_cur = limp->rlim_max;
692         lim_copy(newlim, oldlim);
693         alimp = &newlim->pl_rlimit[which];
694
695         switch (which) {
696
697         case RLIMIT_CPU:
698                 if (limp->rlim_cur != RLIM_INFINITY &&
699                     p->p_cpulimit == RLIM_INFINITY)
700                         callout_reset(&p->p_limco, hz, lim_cb, p);
701                 p->p_cpulimit = limp->rlim_cur;
702                 break;
703         case RLIMIT_DATA:
704                 if (limp->rlim_cur > maxdsiz)
705                         limp->rlim_cur = maxdsiz;
706                 if (limp->rlim_max > maxdsiz)
707                         limp->rlim_max = maxdsiz;
708                 break;
709
710         case RLIMIT_STACK:
711                 if (limp->rlim_cur > maxssiz)
712                         limp->rlim_cur = maxssiz;
713                 if (limp->rlim_max > maxssiz)
714                         limp->rlim_max = maxssiz;
715                 oldssiz = *alimp;
716                 if (p->p_sysent->sv_fixlimit != NULL)
717                         p->p_sysent->sv_fixlimit(&oldssiz,
718                             RLIMIT_STACK);
719                 break;
720
721         case RLIMIT_NOFILE:
722                 if (limp->rlim_cur > maxfilesperproc)
723                         limp->rlim_cur = maxfilesperproc;
724                 if (limp->rlim_max > maxfilesperproc)
725                         limp->rlim_max = maxfilesperproc;
726                 break;
727
728         case RLIMIT_NPROC:
729                 if (limp->rlim_cur > maxprocperuid)
730                         limp->rlim_cur = maxprocperuid;
731                 if (limp->rlim_max > maxprocperuid)
732                         limp->rlim_max = maxprocperuid;
733                 if (limp->rlim_cur < 1)
734                         limp->rlim_cur = 1;
735                 if (limp->rlim_max < 1)
736                         limp->rlim_max = 1;
737                 break;
738         }
739         if (p->p_sysent->sv_fixlimit != NULL)
740                 p->p_sysent->sv_fixlimit(limp, which);
741         *alimp = *limp;
742         p->p_limit = newlim;
743         PROC_UNLOCK(p);
744         lim_free(oldlim);
745
746         if (which == RLIMIT_STACK) {
747                 /*
748                  * Stack is allocated to the max at exec time with only
749                  * "rlim_cur" bytes accessible.  If stack limit is going
750                  * up make more accessible, if going down make inaccessible.
751                  */
752                 if (limp->rlim_cur != oldssiz.rlim_cur) {
753                         vm_offset_t addr;
754                         vm_size_t size;
755                         vm_prot_t prot;
756
757                         if (limp->rlim_cur > oldssiz.rlim_cur) {
758                                 prot = p->p_sysent->sv_stackprot;
759                                 size = limp->rlim_cur - oldssiz.rlim_cur;
760                                 addr = p->p_sysent->sv_usrstack -
761                                     limp->rlim_cur;
762                         } else {
763                                 prot = VM_PROT_NONE;
764                                 size = oldssiz.rlim_cur - limp->rlim_cur;
765                                 addr = p->p_sysent->sv_usrstack -
766                                     oldssiz.rlim_cur;
767                         }
768                         addr = trunc_page(addr);
769                         size = round_page(size);
770                         (void)vm_map_protect(&p->p_vmspace->vm_map,
771                             addr, addr + size, prot, FALSE);
772                 }
773         }
774
775         return (0);
776 }
777
778 #ifndef _SYS_SYSPROTO_H_
779 struct __getrlimit_args {
780         u_int   which;
781         struct  rlimit *rlp;
782 };
783 #endif
784 /* ARGSUSED */
785 int
786 sys_getrlimit(td, uap)
787         struct thread *td;
788         register struct __getrlimit_args *uap;
789 {
790         struct rlimit rlim;
791         struct proc *p;
792         int error;
793
794         if (uap->which >= RLIM_NLIMITS)
795                 return (EINVAL);
796         p = td->td_proc;
797         PROC_LOCK(p);
798         lim_rlimit(p, uap->which, &rlim);
799         PROC_UNLOCK(p);
800         error = copyout(&rlim, uap->rlp, sizeof(struct rlimit));
801         return (error);
802 }
803
804 /*
805  * Transform the running time and tick information for children of proc p
806  * into user and system time usage.
807  */
808 void
809 calccru(p, up, sp)
810         struct proc *p;
811         struct timeval *up;
812         struct timeval *sp;
813 {
814
815         PROC_LOCK_ASSERT(p, MA_OWNED);
816         calcru1(p, &p->p_crux, up, sp);
817 }
818
819 /*
820  * Transform the running time and tick information in proc p into user
821  * and system time usage.  If appropriate, include the current time slice
822  * on this CPU.
823  */
824 void
825 calcru(struct proc *p, struct timeval *up, struct timeval *sp)
826 {
827         struct thread *td;
828         uint64_t runtime, u;
829
830         PROC_LOCK_ASSERT(p, MA_OWNED);
831         PROC_SLOCK_ASSERT(p, MA_OWNED);
832         /*
833          * If we are getting stats for the current process, then add in the
834          * stats that this thread has accumulated in its current time slice.
835          * We reset the thread and CPU state as if we had performed a context
836          * switch right here.
837          */
838         td = curthread;
839         if (td->td_proc == p) {
840                 u = cpu_ticks();
841                 runtime = u - PCPU_GET(switchtime);
842                 td->td_runtime += runtime;
843                 td->td_incruntime += runtime;
844                 PCPU_SET(switchtime, u);
845         }
846         /* Make sure the per-thread stats are current. */
847         FOREACH_THREAD_IN_PROC(p, td) {
848                 if (td->td_incruntime == 0)
849                         continue;
850                 ruxagg(p, td);
851         }
852         calcru1(p, &p->p_rux, up, sp);
853 }
854
855 /* Collect resource usage for a single thread. */
856 void
857 rufetchtd(struct thread *td, struct rusage *ru)
858 {
859         struct proc *p;
860         uint64_t runtime, u;
861
862         p = td->td_proc;
863         PROC_SLOCK_ASSERT(p, MA_OWNED);
864         THREAD_LOCK_ASSERT(td, MA_OWNED);
865         /*
866          * If we are getting stats for the current thread, then add in the
867          * stats that this thread has accumulated in its current time slice.
868          * We reset the thread and CPU state as if we had performed a context
869          * switch right here.
870          */
871         if (td == curthread) {
872                 u = cpu_ticks();
873                 runtime = u - PCPU_GET(switchtime);
874                 td->td_runtime += runtime;
875                 td->td_incruntime += runtime;
876                 PCPU_SET(switchtime, u);
877         }
878         ruxagg(p, td);
879         *ru = td->td_ru;
880         calcru1(p, &td->td_rux, &ru->ru_utime, &ru->ru_stime);
881 }
882
883 static void
884 calcru1(struct proc *p, struct rusage_ext *ruxp, struct timeval *up,
885     struct timeval *sp)
886 {
887         /* {user, system, interrupt, total} {ticks, usec}: */
888         uint64_t ut, uu, st, su, it, tt, tu;
889
890         ut = ruxp->rux_uticks;
891         st = ruxp->rux_sticks;
892         it = ruxp->rux_iticks;
893         tt = ut + st + it;
894         if (tt == 0) {
895                 /* Avoid divide by zero */
896                 st = 1;
897                 tt = 1;
898         }
899         tu = cputick2usec(ruxp->rux_runtime);
900         if ((int64_t)tu < 0) {
901                 /* XXX: this should be an assert /phk */
902                 printf("calcru: negative runtime of %jd usec for pid %d (%s)\n",
903                     (intmax_t)tu, p->p_pid, p->p_comm);
904                 tu = ruxp->rux_tu;
905         }
906
907         if (tu >= ruxp->rux_tu) {
908                 /*
909                  * The normal case, time increased.
910                  * Enforce monotonicity of bucketed numbers.
911                  */
912                 uu = (tu * ut) / tt;
913                 if (uu < ruxp->rux_uu)
914                         uu = ruxp->rux_uu;
915                 su = (tu * st) / tt;
916                 if (su < ruxp->rux_su)
917                         su = ruxp->rux_su;
918         } else if (tu + 3 > ruxp->rux_tu || 101 * tu > 100 * ruxp->rux_tu) {
919                 /*
920                  * When we calibrate the cputicker, it is not uncommon to
921                  * see the presumably fixed frequency increase slightly over
922                  * time as a result of thermal stabilization and NTP
923                  * discipline (of the reference clock).  We therefore ignore
924                  * a bit of backwards slop because we  expect to catch up
925                  * shortly.  We use a 3 microsecond limit to catch low
926                  * counts and a 1% limit for high counts.
927                  */
928                 uu = ruxp->rux_uu;
929                 su = ruxp->rux_su;
930                 tu = ruxp->rux_tu;
931         } else { /* tu < ruxp->rux_tu */
932                 /*
933                  * What happened here was likely that a laptop, which ran at
934                  * a reduced clock frequency at boot, kicked into high gear.
935                  * The wisdom of spamming this message in that case is
936                  * dubious, but it might also be indicative of something
937                  * serious, so lets keep it and hope laptops can be made
938                  * more truthful about their CPU speed via ACPI.
939                  */
940                 printf("calcru: runtime went backwards from %ju usec "
941                     "to %ju usec for pid %d (%s)\n",
942                     (uintmax_t)ruxp->rux_tu, (uintmax_t)tu,
943                     p->p_pid, p->p_comm);
944                 uu = (tu * ut) / tt;
945                 su = (tu * st) / tt;
946         }
947
948         ruxp->rux_uu = uu;
949         ruxp->rux_su = su;
950         ruxp->rux_tu = tu;
951
952         up->tv_sec = uu / 1000000;
953         up->tv_usec = uu % 1000000;
954         sp->tv_sec = su / 1000000;
955         sp->tv_usec = su % 1000000;
956 }
957
958 #ifndef _SYS_SYSPROTO_H_
959 struct getrusage_args {
960         int     who;
961         struct  rusage *rusage;
962 };
963 #endif
964 int
965 sys_getrusage(td, uap)
966         register struct thread *td;
967         register struct getrusage_args *uap;
968 {
969         struct rusage ru;
970         int error;
971
972         error = kern_getrusage(td, uap->who, &ru);
973         if (error == 0)
974                 error = copyout(&ru, uap->rusage, sizeof(struct rusage));
975         return (error);
976 }
977
978 int
979 kern_getrusage(struct thread *td, int who, struct rusage *rup)
980 {
981         struct proc *p;
982         int error;
983
984         error = 0;
985         p = td->td_proc;
986         PROC_LOCK(p);
987         switch (who) {
988         case RUSAGE_SELF:
989                 rufetchcalc(p, rup, &rup->ru_utime,
990                     &rup->ru_stime);
991                 break;
992
993         case RUSAGE_CHILDREN:
994                 *rup = p->p_stats->p_cru;
995                 calccru(p, &rup->ru_utime, &rup->ru_stime);
996                 break;
997
998         case RUSAGE_THREAD:
999                 PROC_SLOCK(p);
1000                 thread_lock(td);
1001                 rufetchtd(td, rup);
1002                 thread_unlock(td);
1003                 PROC_SUNLOCK(p);
1004                 break;
1005
1006         default:
1007                 error = EINVAL;
1008         }
1009         PROC_UNLOCK(p);
1010         return (error);
1011 }
1012
1013 void
1014 rucollect(struct rusage *ru, struct rusage *ru2)
1015 {
1016         long *ip, *ip2;
1017         int i;
1018
1019         if (ru->ru_maxrss < ru2->ru_maxrss)
1020                 ru->ru_maxrss = ru2->ru_maxrss;
1021         ip = &ru->ru_first;
1022         ip2 = &ru2->ru_first;
1023         for (i = &ru->ru_last - &ru->ru_first; i >= 0; i--)
1024                 *ip++ += *ip2++;
1025 }
1026
1027 void
1028 ruadd(struct rusage *ru, struct rusage_ext *rux, struct rusage *ru2,
1029     struct rusage_ext *rux2)
1030 {
1031
1032         rux->rux_runtime += rux2->rux_runtime;
1033         rux->rux_uticks += rux2->rux_uticks;
1034         rux->rux_sticks += rux2->rux_sticks;
1035         rux->rux_iticks += rux2->rux_iticks;
1036         rux->rux_uu += rux2->rux_uu;
1037         rux->rux_su += rux2->rux_su;
1038         rux->rux_tu += rux2->rux_tu;
1039         rucollect(ru, ru2);
1040 }
1041
1042 /*
1043  * Aggregate tick counts into the proc's rusage_ext.
1044  */
1045 static void
1046 ruxagg_locked(struct rusage_ext *rux, struct thread *td)
1047 {
1048
1049         THREAD_LOCK_ASSERT(td, MA_OWNED);
1050         PROC_SLOCK_ASSERT(td->td_proc, MA_OWNED);
1051         rux->rux_runtime += td->td_incruntime;
1052         rux->rux_uticks += td->td_uticks;
1053         rux->rux_sticks += td->td_sticks;
1054         rux->rux_iticks += td->td_iticks;
1055 }
1056
1057 void
1058 ruxagg(struct proc *p, struct thread *td)
1059 {
1060
1061         thread_lock(td);
1062         ruxagg_locked(&p->p_rux, td);
1063         ruxagg_locked(&td->td_rux, td);
1064         td->td_incruntime = 0;
1065         td->td_uticks = 0;
1066         td->td_iticks = 0;
1067         td->td_sticks = 0;
1068         thread_unlock(td);
1069 }
1070
1071 /*
1072  * Update the rusage_ext structure and fetch a valid aggregate rusage
1073  * for proc p if storage for one is supplied.
1074  */
1075 void
1076 rufetch(struct proc *p, struct rusage *ru)
1077 {
1078         struct thread *td;
1079
1080         PROC_SLOCK_ASSERT(p, MA_OWNED);
1081
1082         *ru = p->p_ru;
1083         if (p->p_numthreads > 0)  {
1084                 FOREACH_THREAD_IN_PROC(p, td) {
1085                         ruxagg(p, td);
1086                         rucollect(ru, &td->td_ru);
1087                 }
1088         }
1089 }
1090
1091 /*
1092  * Atomically perform a rufetch and a calcru together.
1093  * Consumers, can safely assume the calcru is executed only once
1094  * rufetch is completed.
1095  */
1096 void
1097 rufetchcalc(struct proc *p, struct rusage *ru, struct timeval *up,
1098     struct timeval *sp)
1099 {
1100
1101         PROC_SLOCK(p);
1102         rufetch(p, ru);
1103         calcru(p, up, sp);
1104         PROC_SUNLOCK(p);
1105 }
1106
1107 /*
1108  * Allocate a new resource limits structure and initialize its
1109  * reference count and mutex pointer.
1110  */
1111 struct plimit *
1112 lim_alloc()
1113 {
1114         struct plimit *limp;
1115
1116         limp = malloc(sizeof(struct plimit), M_PLIMIT, M_WAITOK);
1117         refcount_init(&limp->pl_refcnt, 1);
1118         return (limp);
1119 }
1120
1121 struct plimit *
1122 lim_hold(limp)
1123         struct plimit *limp;
1124 {
1125
1126         refcount_acquire(&limp->pl_refcnt);
1127         return (limp);
1128 }
1129
1130 void
1131 lim_fork(struct proc *p1, struct proc *p2)
1132 {
1133         p2->p_limit = lim_hold(p1->p_limit);
1134         callout_init_mtx(&p2->p_limco, &p2->p_mtx, 0);
1135         if (p1->p_cpulimit != RLIM_INFINITY)
1136                 callout_reset(&p2->p_limco, hz, lim_cb, p2);
1137 }
1138
1139 void
1140 lim_free(limp)
1141         struct plimit *limp;
1142 {
1143
1144         KASSERT(limp->pl_refcnt > 0, ("plimit refcnt underflow"));
1145         if (refcount_release(&limp->pl_refcnt))
1146                 free((void *)limp, M_PLIMIT);
1147 }
1148
1149 /*
1150  * Make a copy of the plimit structure.
1151  * We share these structures copy-on-write after fork.
1152  */
1153 void
1154 lim_copy(dst, src)
1155         struct plimit *dst, *src;
1156 {
1157
1158         KASSERT(dst->pl_refcnt == 1, ("lim_copy to shared limit"));
1159         bcopy(src->pl_rlimit, dst->pl_rlimit, sizeof(src->pl_rlimit));
1160 }
1161
1162 /*
1163  * Return the hard limit for a particular system resource.  The
1164  * which parameter specifies the index into the rlimit array.
1165  */
1166 rlim_t
1167 lim_max(struct proc *p, int which)
1168 {
1169         struct rlimit rl;
1170
1171         lim_rlimit(p, which, &rl);
1172         return (rl.rlim_max);
1173 }
1174
1175 /*
1176  * Return the current (soft) limit for a particular system resource.
1177  * The which parameter which specifies the index into the rlimit array
1178  */
1179 rlim_t
1180 lim_cur(struct proc *p, int which)
1181 {
1182         struct rlimit rl;
1183
1184         lim_rlimit(p, which, &rl);
1185         return (rl.rlim_cur);
1186 }
1187
1188 /*
1189  * Return a copy of the entire rlimit structure for the system limit
1190  * specified by 'which' in the rlimit structure pointed to by 'rlp'.
1191  */
1192 void
1193 lim_rlimit(struct proc *p, int which, struct rlimit *rlp)
1194 {
1195
1196         PROC_LOCK_ASSERT(p, MA_OWNED);
1197         KASSERT(which >= 0 && which < RLIM_NLIMITS,
1198             ("request for invalid resource limit"));
1199         *rlp = p->p_limit->pl_rlimit[which];
1200         if (p->p_sysent->sv_fixlimit != NULL)
1201                 p->p_sysent->sv_fixlimit(rlp, which);
1202 }
1203
1204 void
1205 uihashinit()
1206 {
1207
1208         uihashtbl = hashinit(maxproc / 16, M_UIDINFO, &uihash);
1209         rw_init(&uihashtbl_lock, "uidinfo hash");
1210 }
1211
1212 /*
1213  * Look up a uidinfo struct for the parameter uid.
1214  * uihashtbl_lock must be locked.
1215  */
1216 static struct uidinfo *
1217 uilookup(uid)
1218         uid_t uid;
1219 {
1220         struct uihashhead *uipp;
1221         struct uidinfo *uip;
1222
1223         rw_assert(&uihashtbl_lock, RA_LOCKED);
1224         uipp = UIHASH(uid);
1225         LIST_FOREACH(uip, uipp, ui_hash)
1226                 if (uip->ui_uid == uid)
1227                         break;
1228
1229         return (uip);
1230 }
1231
1232 /*
1233  * Find or allocate a struct uidinfo for a particular uid.
1234  * Increase refcount on uidinfo struct returned.
1235  * uifree() should be called on a struct uidinfo when released.
1236  */
1237 struct uidinfo *
1238 uifind(uid)
1239         uid_t uid;
1240 {
1241         struct uidinfo *old_uip, *uip;
1242
1243         rw_rlock(&uihashtbl_lock);
1244         uip = uilookup(uid);
1245         if (uip == NULL) {
1246                 rw_runlock(&uihashtbl_lock);
1247                 uip = malloc(sizeof(*uip), M_UIDINFO, M_WAITOK | M_ZERO);
1248                 racct_create(&uip->ui_racct);
1249                 rw_wlock(&uihashtbl_lock);
1250                 /*
1251                  * There's a chance someone created our uidinfo while we
1252                  * were in malloc and not holding the lock, so we have to
1253                  * make sure we don't insert a duplicate uidinfo.
1254                  */
1255                 if ((old_uip = uilookup(uid)) != NULL) {
1256                         /* Someone else beat us to it. */
1257                         racct_destroy(&uip->ui_racct);
1258                         free(uip, M_UIDINFO);
1259                         uip = old_uip;
1260                 } else {
1261                         refcount_init(&uip->ui_ref, 0);
1262                         uip->ui_uid = uid;
1263                         mtx_init(&uip->ui_vmsize_mtx, "ui_vmsize", NULL,
1264                             MTX_DEF);
1265                         LIST_INSERT_HEAD(UIHASH(uid), uip, ui_hash);
1266                 }
1267         }
1268         uihold(uip);
1269         rw_unlock(&uihashtbl_lock);
1270         return (uip);
1271 }
1272
1273 /*
1274  * Place another refcount on a uidinfo struct.
1275  */
1276 void
1277 uihold(uip)
1278         struct uidinfo *uip;
1279 {
1280
1281         refcount_acquire(&uip->ui_ref);
1282 }
1283
1284 /*-
1285  * Since uidinfo structs have a long lifetime, we use an
1286  * opportunistic refcounting scheme to avoid locking the lookup hash
1287  * for each release.
1288  *
1289  * If the refcount hits 0, we need to free the structure,
1290  * which means we need to lock the hash.
1291  * Optimal case:
1292  *   After locking the struct and lowering the refcount, if we find
1293  *   that we don't need to free, simply unlock and return.
1294  * Suboptimal case:
1295  *   If refcount lowering results in need to free, bump the count
1296  *   back up, lose the lock and acquire the locks in the proper
1297  *   order to try again.
1298  */
1299 void
1300 uifree(uip)
1301         struct uidinfo *uip;
1302 {
1303         int old;
1304
1305         /* Prepare for optimal case. */
1306         old = uip->ui_ref;
1307         if (old > 1 && atomic_cmpset_int(&uip->ui_ref, old, old - 1))
1308                 return;
1309
1310         /* Prepare for suboptimal case. */
1311         rw_wlock(&uihashtbl_lock);
1312         if (refcount_release(&uip->ui_ref)) {
1313                 racct_destroy(&uip->ui_racct);
1314                 LIST_REMOVE(uip, ui_hash);
1315                 rw_wunlock(&uihashtbl_lock);
1316                 if (uip->ui_sbsize != 0)
1317                         printf("freeing uidinfo: uid = %d, sbsize = %ld\n",
1318                             uip->ui_uid, uip->ui_sbsize);
1319                 if (uip->ui_proccnt != 0)
1320                         printf("freeing uidinfo: uid = %d, proccnt = %ld\n",
1321                             uip->ui_uid, uip->ui_proccnt);
1322                 if (uip->ui_vmsize != 0)
1323                         printf("freeing uidinfo: uid = %d, swapuse = %lld\n",
1324                             uip->ui_uid, (unsigned long long)uip->ui_vmsize);
1325                 mtx_destroy(&uip->ui_vmsize_mtx);
1326                 free(uip, M_UIDINFO);
1327                 return;
1328         }
1329         /*
1330          * Someone added a reference between atomic_cmpset_int() and
1331          * rw_wlock(&uihashtbl_lock).
1332          */
1333         rw_wunlock(&uihashtbl_lock);
1334 }
1335
1336 void
1337 ui_racct_foreach(void (*callback)(struct racct *racct,
1338     void *arg2, void *arg3), void *arg2, void *arg3)
1339 {
1340         struct uidinfo *uip;
1341         struct uihashhead *uih;
1342
1343         rw_rlock(&uihashtbl_lock);
1344         for (uih = &uihashtbl[uihash]; uih >= uihashtbl; uih--) {
1345                 LIST_FOREACH(uip, uih, ui_hash) {
1346                         (callback)(uip->ui_racct, arg2, arg3);
1347                 }
1348         }
1349         rw_runlock(&uihashtbl_lock);
1350 }
1351
1352 /*
1353  * Change the count associated with number of processes
1354  * a given user is using.  When 'max' is 0, don't enforce a limit
1355  */
1356 int
1357 chgproccnt(uip, diff, max)
1358         struct  uidinfo *uip;
1359         int     diff;
1360         rlim_t  max;
1361 {
1362
1363         /* Don't allow them to exceed max, but allow subtraction. */
1364         if (diff > 0 && max != 0) {
1365                 if (atomic_fetchadd_long(&uip->ui_proccnt, (long)diff) + diff > max) {
1366                         atomic_subtract_long(&uip->ui_proccnt, (long)diff);
1367                         return (0);
1368                 }
1369         } else {
1370                 atomic_add_long(&uip->ui_proccnt, (long)diff);
1371                 if (uip->ui_proccnt < 0)
1372                         printf("negative proccnt for uid = %d\n", uip->ui_uid);
1373         }
1374         return (1);
1375 }
1376
1377 /*
1378  * Change the total socket buffer size a user has used.
1379  */
1380 int
1381 chgsbsize(uip, hiwat, to, max)
1382         struct  uidinfo *uip;
1383         u_int  *hiwat;
1384         u_int   to;
1385         rlim_t  max;
1386 {
1387         int diff;
1388
1389         diff = to - *hiwat;
1390         if (diff > 0) {
1391                 if (atomic_fetchadd_long(&uip->ui_sbsize, (long)diff) + diff > max) {
1392                         atomic_subtract_long(&uip->ui_sbsize, (long)diff);
1393                         return (0);
1394                 }
1395         } else {
1396                 atomic_add_long(&uip->ui_sbsize, (long)diff);
1397                 if (uip->ui_sbsize < 0)
1398                         printf("negative sbsize for uid = %d\n", uip->ui_uid);
1399         }
1400         *hiwat = to;
1401         return (1);
1402 }
1403
1404 /*
1405  * Change the count associated with number of pseudo-terminals
1406  * a given user is using.  When 'max' is 0, don't enforce a limit
1407  */
1408 int
1409 chgptscnt(uip, diff, max)
1410         struct  uidinfo *uip;
1411         int     diff;
1412         rlim_t  max;
1413 {
1414
1415         /* Don't allow them to exceed max, but allow subtraction. */
1416         if (diff > 0 && max != 0) {
1417                 if (atomic_fetchadd_long(&uip->ui_ptscnt, (long)diff) + diff > max) {
1418                         atomic_subtract_long(&uip->ui_ptscnt, (long)diff);
1419                         return (0);
1420                 }
1421         } else {
1422                 atomic_add_long(&uip->ui_ptscnt, (long)diff);
1423                 if (uip->ui_ptscnt < 0)
1424                         printf("negative ptscnt for uid = %d\n", uip->ui_uid);
1425         }
1426         return (1);
1427 }