]> CyberLeo.Net >> Repos - FreeBSD/releng/9.3.git/blob - contrib/ntp/libparse/clk_rawdcf.c
o Fix invalid TCP checksums with pf(4). [EN-16:02.pf]
[FreeBSD/releng/9.3.git] / contrib / ntp / libparse / clk_rawdcf.c
1 /*
2  * /src/NTP/REPOSITORY/ntp4-dev/libparse/clk_rawdcf.c,v 4.18 2006/06/22 18:40:01 kardel RELEASE_20060622_A
3  *
4  * clk_rawdcf.c,v 4.18 2006/06/22 18:40:01 kardel RELEASE_20060622_A
5  *
6  * Raw DCF77 pulse clock support
7  *
8  * Copyright (c) 1995-2015 by Frank Kardel <kardel <AT> ntp.org>
9  * Copyright (c) 1989-1994 by Frank Kardel, Friedrich-Alexander Universitaet Erlangen-Nuernberg, Germany
10  *
11  * Redistribution and use in source and binary forms, with or without
12  * modification, are permitted provided that the following conditions
13  * are met:
14  * 1. Redistributions of source code must retain the above copyright
15  *    notice, this list of conditions and the following disclaimer.
16  * 2. Redistributions in binary form must reproduce the above copyright
17  *    notice, this list of conditions and the following disclaimer in the
18  *    documentation and/or other materials provided with the distribution.
19  * 3. Neither the name of the author nor the names of its contributors
20  *    may be used to endorse or promote products derived from this software
21  *    without specific prior written permission.
22  *
23  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
24  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
25  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
26  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
27  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
28  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
29  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
30  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
31  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
32  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
33  * SUCH DAMAGE.
34  *
35  */
36
37 #ifdef HAVE_CONFIG_H
38 # include <config.h>
39 #endif
40
41 #if defined(REFCLOCK) && defined(CLOCK_PARSE) && defined(CLOCK_RAWDCF)
42
43 #include "ntp_fp.h"
44 #include "timevalops.h"
45 #include "ntp_unixtime.h"
46 #include "ntp_calendar.h"
47
48 #include "parse.h"
49 #ifdef PARSESTREAM
50 # include <sys/parsestreams.h>
51 #endif
52
53 #ifndef PARSEKERNEL
54 # include "ntp_stdlib.h"
55 #endif
56
57 /*
58  * DCF77 raw time code
59  *
60  * From "Zur Zeit", Physikalisch-Technische Bundesanstalt (PTB), Braunschweig
61  * und Berlin, Maerz 1989
62  *
63  * Timecode transmission:
64  * AM:
65  *      time marks are send every second except for the second before the
66  *      next minute mark
67  *      time marks consist of a reduction of transmitter power to 25%
68  *      of the nominal level
69  *      the falling edge is the time indication (on time)
70  *      time marks of a 100ms duration constitute a logical 0
71  *      time marks of a 200ms duration constitute a logical 1
72  * FM:
73  *      see the spec. (basically a (non-)inverted psuedo random phase shift)
74  *
75  * Encoding:
76  * Second       Contents
77  * 0  - 10      AM: free, FM: 0
78  * 11 - 14      free
79  * 15           R     - "call bit" used to signalize irregularities in the control facilities
80  *                      (until 2003 indicated transmission via alternate antenna)
81  * 16           A1    - expect zone change (1 hour before)
82  * 17 - 18      Z1,Z2 - time zone
83  *               0  0 illegal
84  *               0  1 MEZ  (MET)
85  *               1  0 MESZ (MED, MET DST)
86  *               1  1 illegal
87  * 19           A2    - expect leap insertion/deletion (1 hour before)
88  * 20           S     - start of time code (1)
89  * 21 - 24      M1    - BCD (lsb first) Minutes
90  * 25 - 27      M10   - BCD (lsb first) 10 Minutes
91  * 28           P1    - Minute Parity (even)
92  * 29 - 32      H1    - BCD (lsb first) Hours
93  * 33 - 34      H10   - BCD (lsb first) 10 Hours
94  * 35           P2    - Hour Parity (even)
95  * 36 - 39      D1    - BCD (lsb first) Days
96  * 40 - 41      D10   - BCD (lsb first) 10 Days
97  * 42 - 44      DW    - BCD (lsb first) day of week (1: Monday -> 7: Sunday)
98  * 45 - 49      MO    - BCD (lsb first) Month
99  * 50           MO0   - 10 Months
100  * 51 - 53      Y1    - BCD (lsb first) Years
101  * 54 - 57      Y10   - BCD (lsb first) 10 Years
102  * 58           P3    - Date Parity (even)
103  * 59                 - usually missing (minute indication), except for leap insertion
104  */
105
106 static parse_pps_fnc_t pps_rawdcf;
107 static parse_cvt_fnc_t cvt_rawdcf;
108 static parse_inp_fnc_t inp_rawdcf;
109
110 typedef struct last_tcode {
111         time_t      tcode;      /* last converted time code */
112         timestamp_t tminute;    /* sample time for minute start */
113         timestamp_t timeout;    /* last timeout timestamp */
114 } last_tcode_t;
115
116 #define BUFFER_MAX      61
117
118 clockformat_t clock_rawdcf =
119 {
120   inp_rawdcf,                   /* DCF77 input handling */
121   cvt_rawdcf,                   /* raw dcf input conversion */
122   pps_rawdcf,                   /* examining PPS information */
123   0,                            /* no private configuration data */
124   "RAW DCF77 Timecode",         /* direct decoding / time synthesis */
125
126   BUFFER_MAX,                   /* bit buffer */
127   sizeof(last_tcode_t)
128 };
129
130 static struct dcfparam
131 {
132         const unsigned char *onebits;
133         const unsigned char *zerobits;
134 } dcfparameter =
135 {
136         (const unsigned char *)"###############RADMLS1248124P124812P1248121241248112481248P??", /* 'ONE' representation */
137         (const unsigned char *)"--------------------s-------p------p----------------------p__"  /* 'ZERO' representation */
138 };
139
140 static struct rawdcfcode
141 {
142         char offset;                    /* start bit */
143 } rawdcfcode[] =
144 {
145         {  0 }, { 15 }, { 16 }, { 17 }, { 19 }, { 20 }, { 21 }, { 25 }, { 28 }, { 29 },
146         { 33 }, { 35 }, { 36 }, { 40 }, { 42 }, { 45 }, { 49 }, { 50 }, { 54 }, { 58 }, { 59 }
147 };
148
149 #define DCF_M   0
150 #define DCF_R   1
151 #define DCF_A1  2
152 #define DCF_Z   3
153 #define DCF_A2  4
154 #define DCF_S   5
155 #define DCF_M1  6
156 #define DCF_M10 7
157 #define DCF_P1  8
158 #define DCF_H1  9
159 #define DCF_H10 10
160 #define DCF_P2  11
161 #define DCF_D1  12
162 #define DCF_D10 13
163 #define DCF_DW  14
164 #define DCF_MO  15
165 #define DCF_MO0 16
166 #define DCF_Y1  17
167 #define DCF_Y10 18
168 #define DCF_P3  19
169
170 static struct partab
171 {
172         char offset;                    /* start bit of parity field */
173 } partab[] =
174 {
175         { 21 }, { 29 }, { 36 }, { 59 }
176 };
177
178 #define DCF_P_P1        0
179 #define DCF_P_P2        1
180 #define DCF_P_P3        2
181
182 #define DCF_Z_MET 0x2
183 #define DCF_Z_MED 0x1
184
185 static u_long
186 ext_bf(
187         unsigned char *buf,
188         int   idx,
189         const unsigned char *zero
190         )
191 {
192         u_long sum = 0;
193         int i, first;
194
195         first = rawdcfcode[idx].offset;
196
197         for (i = rawdcfcode[idx+1].offset - 1; i >= first; i--)
198         {
199                 sum <<= 1;
200                 sum |= (buf[i] != zero[i]);
201         }
202         return sum;
203 }
204
205 static unsigned
206 pcheck(
207        unsigned char *buf,
208        int   idx,
209        const unsigned char *zero
210        )
211 {
212         int i,last;
213         unsigned psum = 1;
214
215         last = partab[idx+1].offset;
216
217         for (i = partab[idx].offset; i < last; i++)
218             psum ^= (buf[i] != zero[i]);
219
220         return psum;
221 }
222
223 static u_long
224 convert_rawdcf(
225                unsigned char   *buffer,
226                int              size,
227                struct dcfparam *dcfprm,
228                clocktime_t     *clock_time
229                )
230 {
231         unsigned char *s = buffer;
232         const unsigned char *b = dcfprm->onebits;
233         const unsigned char *c = dcfprm->zerobits;
234         int i;
235
236         parseprintf(DD_RAWDCF,("parse: convert_rawdcf: \"%.*s\"\n", size, buffer));
237
238         if (size < 57)
239         {
240 #ifndef PARSEKERNEL
241                 msyslog(LOG_ERR, "parse: convert_rawdcf: INCOMPLETE DATA - time code only has %d bits", size);
242 #endif
243                 return CVT_FAIL|CVT_BADFMT;
244         }
245
246         for (i = 0; i < size; i++)
247         {
248                 if ((*s != *b) && (*s != *c))
249                 {
250                         /*
251                          * we only have two types of bytes (ones and zeros)
252                          */
253 #ifndef PARSEKERNEL
254                         msyslog(LOG_ERR, "parse: convert_rawdcf: BAD DATA - no conversion");
255 #endif
256                         return CVT_FAIL|CVT_BADFMT;
257                 }
258                 if (*b) b++;
259                 if (*c) c++;
260                 s++;
261         }
262
263         /*
264          * check Start and Parity bits
265          */
266         if ((ext_bf(buffer, DCF_S, dcfprm->zerobits) == 1) &&
267             pcheck(buffer, DCF_P_P1, dcfprm->zerobits) &&
268             pcheck(buffer, DCF_P_P2, dcfprm->zerobits) &&
269             pcheck(buffer, DCF_P_P3, dcfprm->zerobits))
270         {
271                 /*
272                  * buffer OK
273                  */
274                 parseprintf(DD_RAWDCF,("parse: convert_rawdcf: parity check passed\n"));
275
276                 clock_time->flags  = PARSEB_S_CALLBIT|PARSEB_S_LEAP;
277                 clock_time->utctime= 0;
278                 clock_time->usecond= 0;
279                 clock_time->second = 0;
280                 clock_time->minute = ext_bf(buffer, DCF_M10, dcfprm->zerobits);
281                 clock_time->minute = TIMES10(clock_time->minute) + ext_bf(buffer, DCF_M1, dcfprm->zerobits);
282                 clock_time->hour   = ext_bf(buffer, DCF_H10, dcfprm->zerobits);
283                 clock_time->hour   = TIMES10(clock_time->hour) + ext_bf(buffer, DCF_H1, dcfprm->zerobits);
284                 clock_time->day    = ext_bf(buffer, DCF_D10, dcfprm->zerobits);
285                 clock_time->day    = TIMES10(clock_time->day) + ext_bf(buffer, DCF_D1, dcfprm->zerobits);
286                 clock_time->month  = ext_bf(buffer, DCF_MO0, dcfprm->zerobits);
287                 clock_time->month  = TIMES10(clock_time->month) + ext_bf(buffer, DCF_MO, dcfprm->zerobits);
288                 clock_time->year   = ext_bf(buffer, DCF_Y10, dcfprm->zerobits);
289                 clock_time->year   = TIMES10(clock_time->year) + ext_bf(buffer, DCF_Y1, dcfprm->zerobits);
290
291                 switch (ext_bf(buffer, DCF_Z, dcfprm->zerobits))
292                 {
293                     case DCF_Z_MET:
294                         clock_time->utcoffset = -1*60*60;
295                         break;
296
297                     case DCF_Z_MED:
298                         clock_time->flags     |= PARSEB_DST;
299                         clock_time->utcoffset  = -2*60*60;
300                         break;
301
302                     default:
303                         parseprintf(DD_RAWDCF,("parse: convert_rawdcf: BAD TIME ZONE\n"));
304                         return CVT_FAIL|CVT_BADFMT;
305                 }
306
307                 if (ext_bf(buffer, DCF_A1, dcfprm->zerobits))
308                     clock_time->flags |= PARSEB_ANNOUNCE;
309
310                 if (ext_bf(buffer, DCF_A2, dcfprm->zerobits))
311                     clock_time->flags |= PARSEB_LEAPADD; /* default: DCF77 data format deficiency */
312
313                 if (ext_bf(buffer, DCF_R, dcfprm->zerobits))
314                     clock_time->flags |= PARSEB_CALLBIT;
315
316                 parseprintf(DD_RAWDCF,("parse: convert_rawdcf: TIME CODE OK: %02d:%02d, %02d.%02d.%02d, flags 0x%lx\n",
317                                        (int)clock_time->hour, (int)clock_time->minute, (int)clock_time->day, (int)clock_time->month,(int) clock_time->year,
318                                        (u_long)clock_time->flags));
319                 return CVT_OK;
320         }
321         else
322         {
323                 /*
324                  * bad format - not for us
325                  */
326 #ifndef PARSEKERNEL
327                 msyslog(LOG_ERR, "parse: convert_rawdcf: start bit / parity check FAILED for \"%.*s\"", size, buffer);
328 #endif
329                 return CVT_FAIL|CVT_BADFMT;
330         }
331 }
332
333 /*
334  * parse_cvt_fnc_t cvt_rawdcf
335  * raw dcf input routine - needs to fix up 50 baud
336  * characters for 1/0 decision
337  */
338 static u_long
339 cvt_rawdcf(
340            unsigned char   *buffer,
341            int              size,
342            struct format   *param,
343            clocktime_t     *clock_time,
344            void            *local
345            )
346 {
347         last_tcode_t  *t = (last_tcode_t *)local;
348         unsigned char *s = (unsigned char *)buffer;
349         unsigned char *e = s + size;
350         const unsigned char *b = dcfparameter.onebits;
351         const unsigned char *c = dcfparameter.zerobits;
352         u_long       rtc = CVT_NONE;
353         unsigned int i, lowmax, highmax, cutoff, span;
354 #define BITS 9
355         unsigned char     histbuf[BITS];
356         /*
357          * the input buffer contains characters with runs of consecutive
358          * bits set. These set bits are an indication of the DCF77 pulse
359          * length. We assume that we receive the pulse at 50 Baud. Thus
360          * a 100ms pulse would generate a 4 bit train (20ms per bit and
361          * start bit)
362          * a 200ms pulse would create all zeroes (and probably a frame error)
363          */
364
365         for (i = 0; i < BITS; i++)
366         {
367                 histbuf[i] = 0;
368         }
369
370         cutoff = 0;
371         lowmax = 0;
372
373         while (s < e)
374         {
375                 unsigned int ch = *s ^ 0xFF;
376                 /*
377                  * these lines are left as an excercise to the reader 8-)
378                  */
379                 if (!((ch+1) & ch) || !*s)
380                 {
381
382                         for (i = 0; ch; i++)
383                         {
384                                 ch >>= 1;
385                         }
386
387                         *s = (unsigned char) i;
388                         histbuf[i]++;
389                         cutoff += i;
390                         lowmax++;
391                 }
392                 else
393                 {
394                         parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: character check for 0x%x@%d FAILED\n", *s, (int)(s - (unsigned char *)buffer)));
395                         *s = (unsigned char)~0;
396                         rtc = CVT_FAIL|CVT_BADFMT;
397                 }
398                 s++;
399         }
400
401         if (lowmax)
402         {
403                 cutoff /= lowmax;
404         }
405         else
406         {
407                 cutoff = 4;     /* doesn't really matter - it'll fail anyway, but gives error output */
408         }
409
410         parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: average bit count: %d\n", cutoff));
411
412         lowmax = 0;
413         highmax = 0;
414
415         parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: histogram:"));
416         for (i = 0; i <= cutoff; i++)
417         {
418                 lowmax+=histbuf[i] * i;
419                 highmax += histbuf[i];
420                 parseprintf(DD_RAWDCF,(" %d", histbuf[i]));
421         }
422         parseprintf(DD_RAWDCF, (" <M>"));
423
424         lowmax += highmax / 2;
425
426         if (highmax)
427         {
428                 lowmax /= highmax;
429         }
430         else
431         {
432                 lowmax = 0;
433         }
434
435         highmax = 0;
436         cutoff = 0;
437
438         for (; i < BITS; i++)
439         {
440                 highmax+=histbuf[i] * i;
441                 cutoff +=histbuf[i];
442                 parseprintf(DD_RAWDCF,(" %d", histbuf[i]));
443         }
444         parseprintf(DD_RAWDCF,("\n"));
445
446         if (cutoff)
447         {
448                 highmax /= cutoff;
449         }
450         else
451         {
452                 highmax = BITS-1;
453         }
454
455         span = cutoff = lowmax;
456         for (i = lowmax; i <= highmax; i++)
457         {
458                 if (histbuf[cutoff] > histbuf[i])
459                 {
460                         cutoff = i;
461                         span = i;
462                 }
463                 else
464                     if (histbuf[cutoff] == histbuf[i])
465                     {
466                             span = i;
467                     }
468         }
469
470         cutoff = (cutoff + span) / 2;
471
472         parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: lower maximum %d, higher maximum %d, cutoff %d\n", lowmax, highmax, cutoff));
473
474         s = (unsigned char *)buffer;
475         while (s < e)
476         {
477                 if (*s == (unsigned char)~0)
478                 {
479                         *s = '?';
480                 }
481                 else
482                 {
483                         *s = (*s >= cutoff) ? *b : *c;
484                 }
485                 s++;
486                 if (*b) b++;
487                 if (*c) c++;
488         }
489
490         *s = '\0';
491
492         if (rtc == CVT_NONE)
493         {
494                rtc = convert_rawdcf(buffer, size, &dcfparameter, clock_time);
495                if (rtc == CVT_OK)
496                {
497                         time_t newtime;
498
499                         newtime = parse_to_unixtime(clock_time, &rtc);
500                         if ((rtc == CVT_OK) && t)
501                         {
502                                 if ((newtime - t->tcode) <= 600) /* require a successful telegram within last 10 minutes */
503                                 {
504                                         parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: recent timestamp check OK\n"));
505                                         clock_time->utctime = newtime;
506                                 }
507                                 else
508                                 {
509                                         parseprintf(DD_RAWDCF,("parse: cvt_rawdcf: recent timestamp check FAIL - ignore timestamp\n"));
510                                         rtc = CVT_SKIP;
511                                 }
512                                 t->tcode            = newtime;
513                         }
514                }
515         }
516
517         return rtc;
518 }
519
520 /*
521  * parse_pps_fnc_t pps_rawdcf
522  *
523  * currently a very stupid version - should be extended to decode
524  * also ones and zeros (which is easy)
525  */
526 /*ARGSUSED*/
527 static u_long
528 pps_rawdcf(
529         parse_t *parseio,
530         int status,
531         timestamp_t *ptime
532         )
533 {
534         if (!status)            /* negative edge for simpler wiring (Rx->DCD) */
535         {
536                 parseio->parse_dtime.parse_ptime  = *ptime;
537                 parseio->parse_dtime.parse_state |= PARSEB_PPS|PARSEB_S_PPS;
538         }
539
540         return CVT_NONE;
541 }
542
543 static long
544 calc_usecdiff(
545         timestamp_t *ref,
546         timestamp_t *base,
547         long         offset
548         )
549 {
550         struct timeval delta;
551         long delta_usec = 0;
552
553 #ifdef PARSEKERNEL
554         delta.tv_sec = ref->tv.tv_sec - offset - base->tv.tv_sec;
555         delta.tv_usec = ref->tv.tv_usec - base->tv.tv_usec;
556         if (delta.tv_usec < 0)
557         {
558                 delta.tv_sec  -= 1;
559                 delta.tv_usec += 1000000;
560         }
561 #else
562         l_fp delt;
563         
564         delt = ref->fp;
565         delt.l_i -= offset;
566         L_SUB(&delt, &base->fp);
567         TSTOTV(&delt, &delta);
568 #endif
569
570         delta_usec = 1000000 * (int32_t)delta.tv_sec + delta.tv_usec;
571         return delta_usec;
572 }
573
574 static u_long
575 snt_rawdcf(
576         parse_t *parseio,
577         timestamp_t *ptime
578         )
579 {
580         /*
581          * only synthesize if all of following conditions are met:
582          * - CVT_OK parse_status (we have a time stamp base)
583          * - ABS(ptime - tminute - (parse_index - 1) sec) < 500ms (spaced by 1 sec +- 500ms)
584          * - minute marker is available (confirms minute raster as base)
585          */
586         last_tcode_t  *t = (last_tcode_t *)parseio->parse_pdata;
587         long delta_usec = -1;
588
589         if (t != NULL && t->tminute.tv.tv_sec != 0) {
590                 delta_usec = calc_usecdiff(ptime, &t->tminute, parseio->parse_index - 1);
591                 if (delta_usec < 0)
592                         delta_usec = -delta_usec;
593         }
594         
595         parseprintf(DD_RAWDCF,("parse: snt_rawdcf: synth for offset %d seconds - absolute usec error %ld\n",
596                                parseio->parse_index - 1, delta_usec));
597
598         if (((parseio->parse_dtime.parse_status & CVT_MASK) == CVT_OK) &&
599             (delta_usec < 500000 && delta_usec >= 0)) /* only if minute marker is available */
600         {
601                 parseio->parse_dtime.parse_stime = *ptime;
602
603 #ifdef PARSEKERNEL
604                 parseio->parse_dtime.parse_time.tv.tv_sec++;
605 #else
606                 parseio->parse_dtime.parse_time.fp.l_ui++;
607 #endif
608
609                 parseprintf(DD_RAWDCF,("parse: snt_rawdcf: time stamp synthesized offset %d seconds\n", parseio->parse_index - 1));
610
611                 return updatetimeinfo(parseio, parseio->parse_lstate);
612         }
613         return CVT_NONE;
614 }
615
616 /*
617  * parse_inp_fnc_t inp_rawdcf
618  *
619  * grab DCF77 data from input stream
620  */
621 static u_long
622 inp_rawdcf(
623           parse_t      *parseio,
624           char         ch,
625           timestamp_t  *tstamp
626           )
627 {
628         static struct timeval timeout = { 1, 500000 }; /* 1.5 secongs denote second #60 */
629
630         parseprintf(DD_PARSE, ("inp_rawdcf(0x%p, 0x%x, ...)\n", (void*)parseio, ch));
631
632         parseio->parse_dtime.parse_stime = *tstamp; /* collect timestamp */
633
634         if (parse_timedout(parseio, tstamp, &timeout))
635         {
636                 last_tcode_t *t = (last_tcode_t *)parseio->parse_pdata;
637                 long delta_usec;
638                 
639                 parseprintf(DD_RAWDCF, ("inp_rawdcf: time out seen\n"));
640                 /* finish collection */
641                 (void) parse_end(parseio);
642
643                 if (t != NULL)
644                 {
645                         /* remember minute start sample time if timeouts occur in minute raster */
646                         if (t->timeout.tv.tv_sec != 0)
647                         {
648                                 delta_usec = calc_usecdiff(tstamp, &t->timeout, 60);
649                                 if (delta_usec < 0)
650                                         delta_usec = -delta_usec;
651                         }
652                         else
653                         {
654                                 delta_usec = -1;
655                         }
656
657                         if (delta_usec < 500000 && delta_usec >= 0)
658                         {
659                                 parseprintf(DD_RAWDCF, ("inp_rawdcf: timeout time difference %ld usec - minute marker set\n", delta_usec));
660                                 /* collect minute markers only if spaced by 60 seconds */
661                                 t->tminute = *tstamp;
662                         }
663                         else
664                         {
665                                 parseprintf(DD_RAWDCF, ("inp_rawdcf: timeout time difference %ld usec - minute marker cleared\n", delta_usec));
666                                 memset((char *)&t->tminute, 0, sizeof(t->tminute));
667                         }
668                         t->timeout = *tstamp;
669                 }
670                 (void) parse_addchar(parseio, ch);
671
672                 /* pass up to higher layers */
673                 return PARSE_INP_TIME;
674         }
675         else
676         {
677                 unsigned int rtc;
678
679                 rtc = parse_addchar(parseio, ch);
680                 if (rtc == PARSE_INP_SKIP)
681                 {
682                         if (snt_rawdcf(parseio, tstamp) == CVT_OK)
683                                 return PARSE_INP_SYNTH;
684                 }
685                 return rtc;
686         }
687 }
688
689 #else /* not (REFCLOCK && CLOCK_PARSE && CLOCK_RAWDCF) */
690 int clk_rawdcf_bs;
691 #endif /* not (REFCLOCK && CLOCK_PARSE && CLOCK_RAWDCF) */
692
693 /*
694  * History:
695  *
696  * clk_rawdcf.c,v
697  * Revision 4.18  2006/06/22 18:40:01  kardel
698  * clean up signedness (gcc 4)
699  *
700  * Revision 4.17  2006/01/22 16:01:55  kardel
701  * update version information
702  *
703  * Revision 4.16  2006/01/22 15:51:22  kardel
704  * generate reasonable timecode output on invalid input
705  *
706  * Revision 4.15  2005/08/06 19:17:06  kardel
707  * clean log output
708  *
709  * Revision 4.14  2005/08/06 17:39:40  kardel
710  * cleanup size handling wrt/ to buffer boundaries
711  *
712  * Revision 4.13  2005/04/16 17:32:10  kardel
713  * update copyright
714  *
715  * Revision 4.12  2004/11/14 15:29:41  kardel
716  * support PPSAPI, upgrade Copyright to Berkeley style
717  *
718  * Revision 4.9  1999/12/06 13:42:23  kardel
719  * transfer correctly converted time codes always into tcode
720  *
721  * Revision 4.8  1999/11/28 09:13:50  kardel
722  * RECON_4_0_98F
723  *
724  * Revision 4.7  1999/04/01 20:07:20  kardel
725  * added checking for minutie increment of timestamps in clk_rawdcf.c
726  *
727  * Revision 4.6  1998/06/14 21:09:37  kardel
728  * Sun acc cleanup
729  *
730  * Revision 4.5  1998/06/13 12:04:16  kardel
731  * fix SYSV clock name clash
732  *
733  * Revision 4.4  1998/06/12 15:22:28  kardel
734  * fix prototypes
735  *
736  * Revision 4.3  1998/06/06 18:33:36  kardel
737  * simplified condidional compile expression
738  *
739  * Revision 4.2  1998/05/24 11:04:18  kardel
740  * triggering PPS on negative edge for simpler wiring (Rx->DCD)
741  *
742  * Revision 4.1  1998/05/24 09:39:53  kardel
743  * implementation of the new IO handling model
744  *
745  * Revision 4.0  1998/04/10 19:45:30  kardel
746  * Start 4.0 release version numbering
747  *
748  * from V3 3.24 log info deleted 1998/04/11 kardel
749  *
750  */