crypto/openssl/Makefile

   1 ### Generated automatically from Makefile.org by Configure.
   2
   3 ##
   4 ## Makefile for OpenSSL
   5 ##
   6
   7 VERSION=0.9.8zh
   8 MAJOR=0
   9 MINOR=9.8
  10 SHLIB_VERSION_NUMBER=0.9.8
  11 SHLIB_VERSION_HISTORY=
  12 SHLIB_MAJOR=0
  13 SHLIB_MINOR=9.8
  14 SHLIB_EXT=
  15 PLATFORM=dist
  16 OPTIONS= no-camellia no-capieng no-cms no-gmp no-jpake no-krb5 no-mdc2 no-montasm no-rc5 no-rfc3779 no-seed no-shared no-zlib no-zlib-dynamic
  17 CONFIGURE_ARGS=dist
  18 SHLIB_TARGET=
  19
  20 # HERE indicates where this Makefile lives.  This can be used to indicate
  21 # where sub-Makefiles are expected to be.  Currently has very limited usage,
  22 # and should probably not be bothered with at all.
  23 HERE=.
  24
  25 # INSTALL_PREFIX is for package builders so that they can configure
  26 # for, say, /usr/ and yet have everything installed to /tmp/somedir/usr/.
  27 # Normally it is left empty.
  28 INSTALL_PREFIX=
  29 INSTALLTOP=/usr/local/ssl
  30
  31 # Do not edit this manually. Use Configure --openssldir=DIR do change this!
  32 OPENSSLDIR=/usr/local/ssl
  33
  34 # NO_IDEA - Define to build without the IDEA algorithm
  35 # NO_RC4  - Define to build without the RC4 algorithm
  36 # NO_RC2  - Define to build without the RC2 algorithm
  37 # THREADS - Define when building with threads, you will probably also need any
  38 #           system defines as well, i.e. _REENTERANT for Solaris 2.[34]
  39 # TERMIO  - Define the termio terminal subsystem, needed if sgtty is missing.
  40 # TERMIOS - Define the termios terminal subsystem, Silicon Graphics.
  41 # LONGCRYPT - Define to use HPUX 10.x's long password modification to crypt(3).
  42 # DEVRANDOM - Give this the value of the 'random device' if your OS supports
  43 #           one.  32 bytes will be read from this when the random
  44 #           number generator is initalised.
  45 # SSL_FORBID_ENULL - define if you want the server to be not able to use the
  46 #           NULL encryption ciphers.
  47 #
  48 # LOCK_DEBUG - turns on lots of lock debug output :-)
  49 # REF_CHECK - turn on some xyz_free() assertions.
  50 # REF_PRINT - prints some stuff on structure free.
  51 # CRYPTO_MDEBUG - turns on my 'memory leak' detecting stuff
  52 # MFUNC - Make all Malloc/Free/Realloc calls call
  53 #       CRYPTO_malloc/CRYPTO_free/CRYPTO_realloc which can be setup to
  54 #       call application defined callbacks via CRYPTO_set_mem_functions()
  55 # MD5_ASM needs to be defined to use the x86 assembler for MD5
  56 # SHA1_ASM needs to be defined to use the x86 assembler for SHA1
  57 # RMD160_ASM needs to be defined to use the x86 assembler for RIPEMD160
  58 # Do not define B_ENDIAN or L_ENDIAN if 'unsigned long' == 8.  It must
  59 # equal 4.
  60 # PKCS1_CHECK - pkcs1 tests.
  61
  62 CC= cc
  63 CFLAG= -O
  64 DEPFLAG= -DOPENSSL_NO_CAMELLIA -DOPENSSL_NO_CAPIENG -DOPENSSL_NO_CMS -DOPENSSL_NO_GMP -DOPENSSL_NO_JPAKE -DOPENSSL_NO_MDC2 -DOPENSSL_NO_RC5 -DOPENSSL_NO_RFC3779 -DOPENSSL_NO_SEED
  65 PEX_LIBS=
  66 EX_LIBS=
  67 EXE_EXT=
  68 ARFLAGS=
  69 AR= ar $(ARFLAGS) r
  70 ARD=ar $(ARFLAGS) d
  71 RANLIB= /usr/bin/ranlib
  72 PERL= /usr/bin/perl
  73 TAR= tar
  74 TARFLAGS= --no-recursion --record-size=10240
  75 MAKEDEPPROG=makedepend
  76 LIBDIR=lib
  77
  78 # We let the C compiler driver to take care of .s files. This is done in
  79 # order to be excused from maintaining a separate set of architecture
  80 # dependent assembler flags. E.g. if you throw -mcpu=ultrasparc at SPARC
  81 # gcc, then the driver will automatically translate it to -xarch=v8plus
  82 # and pass it down to assembler.
  83 AS=$(CC) -c
  84 ASFLAG=$(CFLAG)
  85
  86 # For x86 assembler: Set PROCESSOR to 386 if you want to support
  87 # the 80386.
  88 PROCESSOR=
  89
  90 # CPUID module collects small commonly used assembler snippets
  91 CPUID_OBJ=
  92 BN_ASM= bn_asm.o
  93 DES_ENC= des_enc.o fcrypt_b.o
  94 AES_ASM_OBJ= aes_core.o aes_cbc.o
  95 BF_ENC= bf_enc.o
  96 CAST_ENC= c_enc.o
  97 RC4_ENC= rc4_enc.o rc4_skey.o
  98 RC5_ENC= rc5_enc.o
  99 MD5_ASM_OBJ=
 100 SHA1_ASM_OBJ=
 101 RMD160_ASM_OBJ=
 102
 103 # KRB5 stuff
 104 KRB5_INCLUDES=
 105 LIBKRB5=
 106
 107 # Zlib stuff
 108 ZLIB_INCLUDE=
 109 LIBZLIB=
 110
 111 # This is the location of fipscanister.o and friends.
 112 # The FIPS module build will place it $(INSTALLTOP)/lib
 113 # but since $(INSTALLTOP) can only take the default value
 114 # when the module is built it will be in /usr/local/ssl/lib
 115 # $(INSTALLTOP) for this build make be different so hard
 116 # code the path.
 117
 118 FIPSLIBDIR=/usr/local/ssl/fips-1.0/lib/
 119
 120 # This is set to "y" if fipscanister.o is compiled internally as
 121 # opposed to coming from an external validated location.
 122
 123 FIPSCANISTERINTERNAL=n
 124
 125 # The location of the library which contains fipscanister.o
 126 # normally it will be libcrypto unless fipsdso is set in which
 127 # case it will be libfips. If not compiling in FIPS mode at all
 128 # this is empty making it a useful test for a FIPS compile.
 129
 130 FIPSCANLIB=
 131
 132 # Shared library base address. Currently only used on Windows.
 133 #
 134
 135 BASEADDR=0xFB00000
 136
 137 DIRS=   crypto ssl engines apps test tools
 138 SHLIBDIRS= crypto ssl
 139
 140 # dirs in crypto to build
 141 SDIRS=  \
 142         objects \
 143         md2 md4 md5 sha hmac ripemd \
 144         des aes rc2 rc4 idea bf cast \
 145         bn ec rsa dsa ecdsa dh ecdh dso engine \
 146         buffer bio stack lhash rand err \
 147         evp asn1 pem x509 x509v3 conf txt_db pkcs7 pkcs12 comp ocsp ui krb5 \
 148         store pqueue
 149 # keep in mind that the above list is adjusted by ./Configure
 150 # according to no-xxx arguments...
 151
 152 # tests to perform.  "alltests" is a special word indicating that all tests
 153 # should be performed.
 154 TESTS = alltests
 155
 156 MAKEFILE= Makefile
 157
 158 MANDIR=$(OPENSSLDIR)/man
 159 MAN1=1
 160 MAN3=3
 161 MANSUFFIX=
 162 SHELL=/bin/sh
 163
 164 TOP=    .
 165 ONEDIRS=out tmp
 166 EDIRS=  times doc bugs util include certs ms shlib mt demos perl sf dep VMS
 167 WDIRS=  windows
 168 LIBS=   libcrypto.a libssl.a
 169 SHARED_CRYPTO=libcrypto$(SHLIB_EXT)
 170 SHARED_SSL=libssl$(SHLIB_EXT)
 171 SHARED_FIPS=
 172 SHARED_LIBS=
 173 SHARED_LIBS_LINK_EXTS=
 174 SHARED_LDFLAGS=
 175
 176 GENERAL=        Makefile
 177 BASENAME=       openssl
 178 NAME=           $(BASENAME)-$(VERSION)
 179 TARFILE=        $(NAME).tar
 180 WTARFILE=       $(NAME)-win.tar
 181 EXHEADER=       e_os2.h
 182 HEADER=         e_os.h
 183
 184 all: Makefile build_all openssl.pc libssl.pc libcrypto.pc
 185
 186 # as we stick to -e, CLEARENV ensures that local variables in lower
 187 # Makefiles remain local and variable. $${VAR+VAR} is tribute to Korn
 188 # shell, which [annoyingly enough] terminates unset with error if VAR
 189 # is not present:-( TOP= && unset TOP is tribute to HP-UX /bin/sh,
 190 # which terminates unset with error if no variable was present:-(
 191 CLEARENV=       TOP= && unset TOP $${LIB+LIB} $${LIBS+LIBS}     \
 192                 $${INCLUDE+INCLUDE} $${INCLUDES+INCLUDES}       \
 193                 $${DIR+DIR} $${DIRS+DIRS} $${SRC+SRC}           \
 194                 $${LIBSRC+LIBSRC} $${LIBOBJ+LIBOBJ} $${ALL+ALL} \
 195                 $${EXHEADER+EXHEADER} $${HEADER+HEADER}         \
 196                 $${GENERAL+GENERAL} $${CFLAGS+CFLAGS}           \
 197                 $${ASFLAGS+ASFLAGS} $${AFLAGS+AFLAGS}           \
 198                 $${LDCMD+LDCMD} $${LDFLAGS+LDFLAGS}             \
 199                 $${SHAREDCMD+SHAREDCMD} $${SHAREDFLAGS+SHAREDFLAGS}     \
 200                 $${SHARED_LIB+SHARED_LIB} $${LIBEXTRAS+LIBEXTRAS}
 201
 202 BUILDENV=       PLATFORM='${PLATFORM}' PROCESSOR='${PROCESSOR}' \
 203                 CC='${CC}' CFLAG='${CFLAG}'                     \
 204                 AS='${CC}' ASFLAG='${CFLAG} -c'                 \
 205                 AR='${AR}' PERL='${PERL}' RANLIB='${RANLIB}'    \
 206                 SDIRS='${SDIRS}' LIBRPATH='${INSTALLTOP}/$(LIBDIR)'     \
 207                 INSTALL_PREFIX='${INSTALL_PREFIX}'              \
 208                 INSTALLTOP='${INSTALLTOP}' OPENSSLDIR='${OPENSSLDIR}'   \
 209                 LIBDIR='${LIBDIR}' \
 210                 MAKEDEPEND='$$$${TOP}/util/domd $$$${TOP} -MD ${MAKEDEPPROG}' \
 211                 DEPFLAG='-DOPENSSL_NO_DEPRECATED ${DEPFLAG}'    \
 212                 MAKEDEPPROG='${MAKEDEPPROG}'                    \
 213                 SHARED_LDFLAGS='${SHARED_LDFLAGS}'              \
 214                 KRB5_INCLUDES='${KRB5_INCLUDES}' LIBKRB5='${LIBKRB5}'   \
 215                 EXE_EXT='${EXE_EXT}' SHARED_LIBS='${SHARED_LIBS}'       \
 216                 SHLIB_EXT='${SHLIB_EXT}' SHLIB_TARGET='${SHLIB_TARGET}' \
 217                 PEX_LIBS='${PEX_LIBS}' EX_LIBS='${EX_LIBS}'     \
 218                 CPUID_OBJ='${CPUID_OBJ}'                        \
 219                 BN_ASM='${BN_ASM}' DES_ENC='${DES_ENC}'         \
 220                 AES_ASM_OBJ='${AES_ASM_OBJ}'                    \
 221                 BF_ENC='${BF_ENC}' CAST_ENC='${CAST_ENC}'       \
 222                 RC4_ENC='${RC4_ENC}' RC5_ENC='${RC5_ENC}'       \
 223                 SHA1_ASM_OBJ='${SHA1_ASM_OBJ}'                  \
 224                 MD5_ASM_OBJ='${MD5_ASM_OBJ}'                    \
 225                 RMD160_ASM_OBJ='${RMD160_ASM_OBJ}'              \
 226                 FIPSLIBDIR='${FIPSLIBDIR}'                      \
 227                 FIPSCANLIB="$${FIPSCANLIB:-$(FIPSCANLIB)}"      \
 228                 FIPSCANISTERINTERNAL='${FIPSCANISTERINTERNAL}'  \
 229                 FIPS_EX_OBJ='${FIPS_EX_OBJ}'    \
 230                 THIS=$${THIS:-$@} MAKEFILE=Makefile MAKEOVERRIDES=
 231 # MAKEOVERRIDES= effectively "equalizes" GNU-ish and SysV-ish make flavors,
 232 # which in turn eliminates ambiguities in variable treatment with -e.
 233
 234 # BUILD_CMD is a generic macro to build a given target in a given
 235 # subdirectory.  The target must be given through the shell variable
 236 # `target' and the subdirectory to build in must be given through `dir'.
 237 # This macro shouldn't be used directly, use RECURSIVE_BUILD_CMD or
 238 # BUILD_ONE_CMD instead.
 239 #
 240 # BUILD_ONE_CMD is a macro to build a given target in a given
 241 # subdirectory if that subdirectory is part of $(DIRS).  It requires
 242 # exactly the same shell variables as BUILD_CMD.
 243 #
 244 # RECURSIVE_BUILD_CMD is a macro to build a given target in all
 245 # subdirectories defined in $(DIRS).  It requires that the target
 246 # is given through the shell variable `target'.
 247 BUILD_CMD=  if [ -d "$$dir" ]; then \
 248             (   [ $$target != all -a -z "$(FIPSCANLIB)" ] && FIPSCANLIB=/dev/null; \
 249                 cd $$dir && echo "making $$target in $$dir..." && \
 250                 $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. DIR=$$dir $$target \
 251             ) || exit 1; \
 252             fi
 253 RECURSIVE_BUILD_CMD=for dir in $(DIRS); do $(BUILD_CMD); done
 254 BUILD_ONE_CMD=\
 255         if echo " $(DIRS) " | grep " $$dir " >/dev/null 2>/dev/null; then \
 256                 $(BUILD_CMD); \
 257         fi
 258
 259 reflect:
 260         @[ -n "$(THIS)" ] && $(CLEARENV) && $(MAKE) $(THIS) -e $(BUILDENV)
 261
 262 FIPS_EX_OBJ= ../crypto/aes/aes_cfb.o \
 263         ../crypto/aes/aes_ecb.o \
 264         ../crypto/aes/aes_ofb.o \
 265         ../crypto/bn/bn_add.o \
 266         ../crypto/bn/bn_blind.o \
 267         ../crypto/bn/bn_ctx.o \
 268         ../crypto/bn/bn_div.o \
 269         ../crypto/bn/bn_exp2.o \
 270         ../crypto/bn/bn_exp.o \
 271         ../crypto/bn/bn_gcd.o \
 272         ../crypto/bn/bn_lib.o \
 273         ../crypto/bn/bn_mod.o \
 274         ../crypto/bn/bn_mont.o \
 275         ../crypto/bn/bn_mul.o \
 276         ../crypto/bn/bn_prime.o \
 277         ../crypto/bn/bn_rand.o \
 278         ../crypto/bn/bn_recp.o \
 279         ../crypto/bn/bn_shift.o \
 280         ../crypto/bn/bn_sqr.o \
 281         ../crypto/bn/bn_word.o \
 282         ../crypto/bn/bn_x931p.o \
 283         ../crypto/buffer/buf_str.o \
 284         ../crypto/cryptlib.o \
 285         ../crypto/des/cfb64ede.o \
 286         ../crypto/des/cfb64enc.o \
 287         ../crypto/des/cfb_enc.o \
 288         ../crypto/des/ecb3_enc.o \
 289         ../crypto/des/ecb_enc.o \
 290         ../crypto/des/ofb64ede.o \
 291         ../crypto/des/ofb64enc.o \
 292         ../crypto/des/fcrypt.o \
 293         ../crypto/des/set_key.o \
 294         ../crypto/dsa/dsa_utl.o \
 295         ../crypto/dsa/dsa_sign.o \
 296         ../crypto/dsa/dsa_vrf.o \
 297         ../crypto/err/err.o \
 298         ../crypto/evp/digest.o \
 299         ../crypto/evp/enc_min.o \
 300         ../crypto/evp/e_aes.o \
 301         ../crypto/evp/e_des3.o \
 302         ../crypto/evp/p_sign.o \
 303         ../crypto/evp/p_verify.o \
 304         ../crypto/mem_clr.o \
 305         ../crypto/mem.o \
 306         ../crypto/rand/md_rand.o \
 307         ../crypto/rand/rand_egd.o \
 308         ../crypto/rand/randfile.o \
 309         ../crypto/rand/rand_lib.o \
 310         ../crypto/rand/rand_os2.o \
 311         ../crypto/rand/rand_unix.o \
 312         ../crypto/rand/rand_win.o \
 313         ../crypto/rsa/rsa_lib.o \
 314         ../crypto/rsa/rsa_none.o \
 315         ../crypto/rsa/rsa_oaep.o \
 316         ../crypto/rsa/rsa_pk1.o \
 317         ../crypto/rsa/rsa_pss.o \
 318         ../crypto/rsa/rsa_ssl.o \
 319         ../crypto/rsa/rsa_x931.o \
 320         ../crypto/sha/sha1dgst.o \
 321         ../crypto/sha/sha256.o \
 322         ../crypto/sha/sha512.o \
 323         ../crypto/uid.o
 324
 325 sub_all: build_all
 326 build_all: build_libs build_apps build_tests build_tools
 327
 328 build_libs: build_crypto build_fips build_ssl build_shared build_engines
 329
 330 build_crypto:
 331         if [ -n "$(FIPSCANLIB)" ]; then \
 332                 EXCL_OBJ='$(AES_ASM_OBJ) $(BN_ASM) $(DES_ENC) $(CPUID_OBJ) $(SHA1_ASM_OBJ) $(FIPS_EX_OBJ)' ; export EXCL_OBJ ; \
 333                 ARX='$(PERL) $${TOP}/util/arx.pl $(AR)' ; \
 334         else \
 335                 ARX='${AR}' ; \
 336         fi ; export ARX ; \
 337                 dir=crypto; target=all; $(BUILD_ONE_CMD)
 338 build_fips:
 339         @dir=fips; target=all; [ -z "$(FIPSCANLIB)" ] || $(BUILD_ONE_CMD)
 340 build_ssl: build_crypto
 341         @dir=ssl; target=all; $(BUILD_ONE_CMD)
 342 build_engines: build_crypto
 343         @dir=engines; target=all; $(BUILD_ONE_CMD)
 344 build_apps: build_libs
 345         @dir=apps; target=all; $(BUILD_ONE_CMD)
 346 build_tests: build_libs
 347         @dir=test; target=all; $(BUILD_ONE_CMD)
 348 build_tools: build_libs
 349         @dir=tools; target=all; $(BUILD_ONE_CMD)
 350
 351 all_testapps: build_libs build_testapps
 352 build_testapps:
 353         @dir=crypto; target=testapps; $(BUILD_ONE_CMD)
 354
 355 build_shared:   $(SHARED_LIBS)
 356 libcrypto$(SHLIB_EXT): libcrypto.a $(SHARED_FIPS)
 357         @if [ "$(SHLIB_TARGET)" != "" ]; then \
 358                 if [ "$(FIPSCANLIB)" = "libfips" ]; then \
 359                         $(ARD) libcrypto.a fipscanister.o ; \
 360                         $(MAKE) SHLIBDIRS='crypto' SHLIBDEPS='-lfips' build-shared; \
 361                         $(AR) libcrypto.a fips/fipscanister.o ; \
 362                 else \
 363                         if [ "$(FIPSCANLIB)" = "libcrypto" ]; then \
 364                                 FIPSLD_CC="$(CC)"; CC=fips/fipsld; \
 365                                 export CC FIPSLD_CC; \
 366                         fi; \
 367                         $(MAKE) -e SHLIBDIRS='crypto' build-shared; \
 368                 fi \
 369         else \
 370                 echo "There's no support for shared libraries on this platform" >&2; \
 371                 exit 1; \
 372         fi
 373
 374 libssl$(SHLIB_EXT): libcrypto$(SHLIB_EXT) libssl.a
 375         @if [ "$(SHLIB_TARGET)" != "" ]; then \
 376                 shlibdeps=-lcrypto; \
 377                 [ "$(FIPSCANLIB)" = "libfips" ] && shlibdeps="$$shlibdeps -lfips"; \
 378                 $(MAKE) SHLIBDIRS=ssl SHLIBDEPS="$$shlibdeps" build-shared; \
 379         else \
 380                 echo "There's no support for shared libraries on this platform" >&2 ; \
 381                 exit 1; \
 382         fi
 383
 384 fips/fipscanister.o:    build_fips
 385 libfips$(SHLIB_EXT):            fips/fipscanister.o
 386         @if [ "$(SHLIB_TARGET)" != "" ]; then \
 387                 FIPSLD_CC="$(CC)"; CC=fips/fipsld; export CC FIPSLD_CC; \
 388                 $(MAKE) -f Makefile.shared -e $(BUILDENV) \
 389                         CC=$${CC} LIBNAME=fips THIS=$@ \
 390                         LIBEXTRAS=fips/fipscanister.o \
 391                         LIBDEPS="$(EX_LIBS)" \
 392                         LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
 393                         link_o.$(SHLIB_TARGET) || { rm -f $@; exit 1; } \
 394         else \
 395                 echo "There's no support for shared libraries on this platform" >&2; \
 396                 exit 1; \
 397         fi
 398
 399 libfips.a:
 400         dir=fips; target=all; $(BUILD_ONE_CMD)
 401
 402 clean-shared:
 403         @set -e; for i in $(SHLIBDIRS); do \
 404                 if [ -n "$(SHARED_LIBS_LINK_EXTS)" ]; then \
 405                         tmp="$(SHARED_LIBS_LINK_EXTS)"; \
 406                         for j in $${tmp:-x}; do \
 407                                 ( set -x; rm -f lib$$i$$j ); \
 408                         done; \
 409                 fi; \
 410                 ( set -x; rm -f lib$$i$(SHLIB_EXT) ); \
 411                 if [ "$(PLATFORM)" = "Cygwin" ]; then \
 412                         ( set -x; rm -f cyg$$i$(SHLIB_EXT) lib$$i$(SHLIB_EXT).a ); \
 413                 fi; \
 414         done
 415
 416 link-shared:
 417         @ set -e; for i in ${SHLIBDIRS}; do \
 418                 $(MAKE) -f $(HERE)/Makefile.shared -e $(BUILDENV) \
 419                         LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
 420                         LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 421                         symlink.$(SHLIB_TARGET); \
 422                 libs="$$libs -l$$i"; \
 423         done
 424
 425 build-shared: do_$(SHLIB_TARGET) link-shared
 426
 427 do_$(SHLIB_TARGET):
 428         @ set -e; libs='-L. ${SHLIBDEPS}'; for i in ${SHLIBDIRS}; do \
 429                 if [ "${SHLIBDIRS}" = "ssl" -a -n "$(LIBKRB5)" ]; then \
 430                         libs="$(LIBKRB5) $$libs"; \
 431                 fi; \
 432                 $(CLEARENV) && $(MAKE) -f Makefile.shared -e $(BUILDENV) \
 433                         LIBNAME=$$i LIBVERSION=${SHLIB_MAJOR}.${SHLIB_MINOR} \
 434                         LIBCOMPATVERSIONS=";${SHLIB_VERSION_HISTORY}" \
 435                         LIBDEPS="$$libs $(EX_LIBS)" \
 436                         link_a.$(SHLIB_TARGET); \
 437                 libs="-l$$i $$libs"; \
 438         done
 439
 440 libcrypto.pc: Makefile
 441         @ ( echo 'prefix=$(INSTALLTOP)'; \
 442             echo 'exec_prefix=$${prefix}'; \
 443             echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 444             echo 'includedir=$${prefix}/include'; \
 445             echo ''; \
 446             echo 'Name: OpenSSL-libcrypto'; \
 447             echo 'Description: OpenSSL cryptography library'; \
 448             echo 'Version: '$(VERSION); \
 449             echo 'Requires: '; \
 450             echo 'Libs: -L$${libdir} -lcrypto $(EX_LIBS)'; \
 451             echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libcrypto.pc
 452
 453 libssl.pc: Makefile
 454         @ ( echo 'prefix=$(INSTALLTOP)'; \
 455             echo 'exec_prefix=$${prefix}'; \
 456             echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 457             echo 'includedir=$${prefix}/include'; \
 458             echo ''; \
 459             echo 'Name: OpenSSL'; \
 460             echo 'Description: Secure Sockets Layer and cryptography libraries'; \
 461             echo 'Version: '$(VERSION); \
 462             echo 'Requires: '; \
 463             echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
 464             echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > libssl.pc
 465
 466 openssl.pc: Makefile
 467         @ ( echo 'prefix=$(INSTALLTOP)'; \
 468             echo 'exec_prefix=$${prefix}'; \
 469             echo 'libdir=$${exec_prefix}/$(LIBDIR)'; \
 470             echo 'includedir=$${prefix}/include'; \
 471             echo ''; \
 472             echo 'Name: OpenSSL'; \
 473             echo 'Description: Secure Sockets Layer and cryptography libraries and tools'; \
 474             echo 'Version: '$(VERSION); \
 475             echo 'Requires: '; \
 476             echo 'Libs: -L$${libdir} -lssl -lcrypto $(EX_LIBS)'; \
 477             echo 'Cflags: -I$${includedir} $(KRB5_INCLUDES)' ) > openssl.pc
 478
 479 Makefile: Makefile.org Configure config
 480         @echo "Makefile is older than Makefile.org, Configure or config."
 481         @echo "Reconfigure the source tree (via './config' or 'perl Configure'), please."
 482         @false
 483
 484 libclean:
 485         rm -f *.map *.so *.so.* *.dll engines/*.so engines/*.dll *.a engines/*.a */lib */*/lib
 486
 487 clean:  libclean
 488         rm -f shlib/*.o *.o core a.out fluff rehash.time testlog make.log cctest cctest.c
 489         @set -e; target=clean; $(RECURSIVE_BUILD_CMD)
 490         rm -f $(LIBS)
 491         rm -f openssl.pc libssl.pc libcrypto.pc
 492         rm -f speed.* .pure
 493         rm -f $(TARFILE)
 494         @set -e; for i in $(ONEDIRS) ;\
 495         do \
 496         rm -fr $$i/*; \
 497         done
 498
 499 makefile.one: files
 500         $(PERL) util/mk1mf.pl >makefile.one; \
 501         sh util/do_ms.sh
 502
 503 files:
 504         $(PERL) $(TOP)/util/files.pl Makefile > $(TOP)/MINFO
 505         @set -e; target=files; $(RECURSIVE_BUILD_CMD)
 506
 507 links:
 508         @$(PERL) $(TOP)/util/mkdir-p.pl include/openssl
 509         @$(PERL) $(TOP)/util/mklink.pl include/openssl $(EXHEADER)
 510         @set -e; target=links; $(RECURSIVE_BUILD_CMD)
 511         @if [ -z "$(FIPSCANLIB)" ]; then \
 512                 set -e; target=links; dir=fips ; $(BUILD_CMD) ; \
 513         fi
 514
 515 gentests:
 516         @(cd test && echo "generating dummy tests (if needed)..." && \
 517         $(CLEARENV) && $(MAKE) -e $(BUILDENV) TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on generate );
 518
 519 dclean:
 520         rm -f *.bak
 521         @set -e; target=dclean; $(RECURSIVE_BUILD_CMD)
 522
 523 rehash: rehash.time
 524 rehash.time: certs apps
 525         @if [ -z "$(CROSS_COMPILE)" ]; then \
 526                 (OPENSSL="`pwd`/util/opensslwrap.sh"; \
 527                 OPENSSL_DEBUG_MEMORY=on; \
 528                 export OPENSSL OPENSSL_DEBUG_MEMORY; \
 529                 $(PERL) tools/c_rehash certs) && \
 530                 touch rehash.time; \
 531         fi
 532
 533 test:   tests
 534
 535 tests: rehash
 536         @(cd test && echo "testing..." && \
 537         $(CLEARENV) && $(MAKE) -e $(BUILDENV) TOP=.. TESTS='${TESTS}' OPENSSL_DEBUG_MEMORY=on tests );
 538         util/opensslwrap.sh version -a
 539
 540 report:
 541         @$(PERL) util/selftest.pl
 542
 543 depend:
 544         @set -e; target=depend; $(RECURSIVE_BUILD_CMD)
 545
 546 lint:
 547         @set -e; target=lint; $(RECURSIVE_BUILD_CMD)
 548
 549 tags:
 550         rm -f TAGS
 551         find . -name '[^.]*.[ch]' | xargs etags -a
 552
 553 errors:
 554         $(PERL) util/mkerr.pl -recurse -write
 555         (cd engines; $(MAKE) PERL=$(PERL) errors)
 556         $(PERL) util/ck_errf.pl */*.c */*/*.c
 557
 558 stacks:
 559         $(PERL) util/mkstack.pl -write
 560
 561 util/libeay.num::
 562         $(PERL) util/mkdef.pl crypto update
 563
 564 util/ssleay.num::
 565         $(PERL) util/mkdef.pl ssl update
 566
 567 crypto/objects/obj_dat.h: crypto/objects/obj_dat.pl crypto/objects/obj_mac.h
 568         $(PERL) crypto/objects/obj_dat.pl crypto/objects/obj_mac.h crypto/objects/obj_dat.h
 569 crypto/objects/obj_mac.h: crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num
 570         $(PERL) crypto/objects/objects.pl crypto/objects/objects.txt crypto/objects/obj_mac.num crypto/objects/obj_mac.h
 571
 572 apps/openssl-vms.cnf: apps/openssl.cnf
 573         $(PERL) VMS/VMSify-conf.pl < apps/openssl.cnf > apps/openssl-vms.cnf
 574
 575 crypto/bn/bn_prime.h: crypto/bn/bn_prime.pl
 576         $(PERL) crypto/bn/bn_prime.pl >crypto/bn/bn_prime.h
 577
 578
 579 TABLE: Configure
 580         (echo 'Output of `Configure TABLE'"':"; \
 581         $(PERL) Configure TABLE) > TABLE
 582
 583 update: errors stacks util/libeay.num util/ssleay.num crypto/objects/obj_dat.h apps/openssl-vms.cnf crypto/bn/bn_prime.h TABLE depend
 584
 585 # Build distribution tar-file. As the list of files returned by "find" is
 586 # pretty long, on several platforms a "too many arguments" error or similar
 587 # would occur. Therefore the list of files is temporarily stored into a file
 588 # and read directly, requiring GNU-Tar. Call "make TAR=gtar dist" if the normal
 589 # tar does not support the --files-from option.
 590 TAR_COMMAND=$(TAR) $(TARFLAGS) --files-from ../$(TARFILE).list \
 591                                --owner openssl:0 --group openssl:0 \
 592                                --transform 's|^|openssl-$(VERSION)/|' \
 593                                -cvf -
 594
 595 ../$(TARFILE).list:
 596         find * \! -name STATUS \! -name TABLE \! -name '*.o' \! -name '*.a' \
 597                \! -name '*.so' \! -name '*.so.*'  \! -name 'openssl' \
 598                \! -name '*test' \! -name '.#*' \! -name '*~' \
 599             | sort > ../$(TARFILE).list
 600
 601 tar: ../$(TARFILE).list
 602         find . -type d -print | xargs chmod 755
 603         find . -type f -print | xargs chmod a+r
 604         find . -type f -perm -0100 -print | xargs chmod a+x
 605         $(TAR_COMMAND) | gzip --best >../$(TARFILE).gz
 606         rm -f ../$(TARFILE).list
 607         ls -l ../$(TARFILE).gz
 608
 609 tar-snap: ../$(TARFILE).list
 610         $(TAR_COMMAND) > ../$(TARFILE)
 611         rm -f ../$(TARFILE).list
 612         ls -l ../$(TARFILE)
 613
 614 dist:
 615         $(PERL) Configure dist
 616         @$(MAKE) dist_pem_h
 617         @$(MAKE) SDIRS='${SDIRS}' clean
 618         @$(MAKE) TAR='${TAR}' TARFLAGS='${TARFLAGS}' tar
 619
 620 dist_pem_h:
 621         (cd crypto/pem; $(MAKE) -e $(BUILDENV) pem.h; $(MAKE) clean)
 622
 623 install: all install_docs install_sw
 624
 625 install_sw:
 626         @$(PERL) $(TOP)/util/mkdir-p.pl $(INSTALL_PREFIX)$(INSTALLTOP)/bin \
 627                 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR) \
 628                 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/engines \
 629                 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig \
 630                 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl \
 631                 $(INSTALL_PREFIX)$(OPENSSLDIR)/misc \
 632                 $(INSTALL_PREFIX)$(OPENSSLDIR)/certs \
 633                 $(INSTALL_PREFIX)$(OPENSSLDIR)/private
 634         @set -e; headerlist="$(EXHEADER)"; for i in $$headerlist;\
 635         do \
 636         (cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
 637         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
 638         done;
 639         @set -e; target=install; $(RECURSIVE_BUILD_CMD)
 640         @set -e; for i in $(LIBS) ;\
 641         do \
 642                 if [ -f "$$i" ]; then \
 643                 (       echo installing $$i; \
 644                         cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 645                         $(RANLIB) $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 646                         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 647                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i ); \
 648                 fi; \
 649         done;
 650         @set -e; if [ -n "$(SHARED_LIBS)" ]; then \
 651                 tmp="$(SHARED_LIBS)"; \
 652                 for i in $${tmp:-x}; \
 653                 do \
 654                         if [ -f "$$i" -o -f "$$i.a" ]; then \
 655                         (       echo installing $$i; \
 656                                 if [ "$(PLATFORM)" != "Cygwin" ]; then \
 657                                         cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 658                                         chmod 555 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 659                                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 660                                 else \
 661                                         c=`echo $$i | sed 's/^lib\(.*\)\.dll\.a/cyg\1-$(SHLIB_VERSION_NUMBER).dll/'`; \
 662                                         cp $$c $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 663                                         chmod 755 $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new; \
 664                                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c.new $(INSTALL_PREFIX)$(INSTALLTOP)/bin/$$c; \
 665                                         cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 666                                         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new; \
 667                                         mv -f $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i.new $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/$$i; \
 668                                 fi ); \
 669                         fi; \
 670                 done; \
 671                 (       here="`pwd`"; \
 672                         cd $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR); \
 673                         $(MAKE) -f $$here/Makefile HERE="$$here" link-shared ); \
 674                 if [ "$(INSTALLTOP)" != "/usr" ]; then \
 675                         echo 'OpenSSL shared libraries have been installed in:'; \
 676                         echo '  $(INSTALLTOP)'; \
 677                         echo ''; \
 678                         sed -e '1,/^$$/d' doc/openssl-shared.txt; \
 679                 fi; \
 680         fi
 681         cp libcrypto.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 682         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libcrypto.pc
 683         cp libssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 684         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/libssl.pc
 685         cp openssl.pc $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig
 686         chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/$(LIBDIR)/pkgconfig/openssl.pc
 687
 688 install_docs:
 689         @$(PERL) $(TOP)/util/mkdir-p.pl \
 690                 $(INSTALL_PREFIX)$(MANDIR)/man1 \
 691                 $(INSTALL_PREFIX)$(MANDIR)/man3 \
 692                 $(INSTALL_PREFIX)$(MANDIR)/man5 \
 693                 $(INSTALL_PREFIX)$(MANDIR)/man7
 694         @pod2man="`cd ./util; ./pod2mantest $(PERL)`"; \
 695         here="`pwd`"; \
 696         filecase=; \
 697         if [ "$(PLATFORM)" = "DJGPP" -o "$(PLATFORM)" = "Cygwin" -o "$(PLATFORM)" = "mingw" ]; then \
 698                 filecase=-i; \
 699         fi; \
 700         set -e; for i in doc/apps/*.pod; do \
 701                 fn=`basename $$i .pod`; \
 702                 sec=`$(PERL) util/extract-section.pl 1 < $$i`; \
 703                 echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 704                 (cd `$(PERL) util/dirname.pl $$i`; \
 705                 sh -c "$$pod2man \
 706                         --section=$$sec --center=OpenSSL \
 707                         --release=$(VERSION) `basename $$i`") \
 708                         >  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
 709                 $(PERL) util/extract-names.pl < $$i | \
 710                         (grep -v $$filecase "^$$fn\$$"; true) | \
 711                         (grep -v "[     ]"; true) | \
 712                         (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 713                          while read n; do \
 714                                 $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 715                          done); \
 716         done; \
 717         set -e; for i in doc/crypto/*.pod doc/ssl/*.pod; do \
 718                 fn=`basename $$i .pod`; \
 719                 sec=`$(PERL) util/extract-section.pl 3 < $$i`; \
 720                 echo "installing man$$sec/$$fn.$${sec}$(MANSUFFIX)"; \
 721                 (cd `$(PERL) util/dirname.pl $$i`; \
 722                 sh -c "$$pod2man \
 723                         --section=$$sec --center=OpenSSL \
 724                         --release=$(VERSION) `basename $$i`") \
 725                         >  $(INSTALL_PREFIX)$(MANDIR)/man$$sec/$$fn.$${sec}$(MANSUFFIX); \
 726                 $(PERL) util/extract-names.pl < $$i | \
 727                         (grep -v $$filecase "^$$fn\$$"; true) | \
 728                         (grep -v "[     ]"; true) | \
 729                         (cd $(INSTALL_PREFIX)$(MANDIR)/man$$sec/; \
 730                          while read n; do \
 731                                 $$here/util/point.sh $$fn.$${sec}$(MANSUFFIX) "$$n".$${sec}$(MANSUFFIX); \
 732                          done); \
 733         done
 734
 735 # DO NOT DELETE THIS LINE -- make depend depends on it.