]> CyberLeo.Net >> Repos - FreeBSD/stable/10.git/blob - bin/dd/conv.c
MFC r368207,368607:
[FreeBSD/stable/10.git] / bin / dd / conv.c
1 /*-
2  * Copyright (c) 1991, 1993, 1994
3  *      The Regents of the University of California.  All rights reserved.
4  *
5  * This code is derived from software contributed to Berkeley by
6  * Keith Muller of the University of California, San Diego and Lance
7  * Visser of Convex Computer Corporation.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions and the following disclaimer.
14  * 2. Redistributions in binary form must reproduce the above copyright
15  *    notice, this list of conditions and the following disclaimer in the
16  *    documentation and/or other materials provided with the distribution.
17  * 4. Neither the name of the University nor the names of its contributors
18  *    may be used to endorse or promote products derived from this software
19  *    without specific prior written permission.
20  *
21  * THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
22  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
23  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
24  * ARE DISCLAIMED.  IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
25  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
26  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
27  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
28  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
29  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
30  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
31  * SUCH DAMAGE.
32  */
33
34 #ifndef lint
35 #if 0
36 static char sccsid[] = "@(#)conv.c      8.3 (Berkeley) 4/2/94";
37 #endif
38 #endif /* not lint */
39 #include <sys/cdefs.h>
40 __FBSDID("$FreeBSD$");
41
42 #include <sys/param.h>
43
44 #include <err.h>
45 #include <inttypes.h>
46 #include <string.h>
47
48 #include "dd.h"
49 #include "extern.h"
50
51 /*
52  * def --
53  * Copy input to output.  Input is buffered until reaches obs, and then
54  * output until less than obs remains.  Only a single buffer is used.
55  * Worst case buffer calculation is (ibs + obs - 1).
56  */
57 void
58 def(void)
59 {
60         u_char *inp;
61         const u_char *t;
62         size_t cnt;
63
64         if ((t = ctab) != NULL)
65                 for (inp = in.dbp - (cnt = in.dbrcnt); cnt--; ++inp)
66                         *inp = t[*inp];
67
68         /* Make the output buffer look right. */
69         out.dbp = in.dbp;
70         out.dbcnt = in.dbcnt;
71
72         if (in.dbcnt >= out.dbsz) {
73                 /* If the output buffer is full, write it. */
74                 dd_out(0);
75
76                 /*
77                  * Ddout copies the leftover output to the beginning of
78                  * the buffer and resets the output buffer.  Reset the
79                  * input buffer to match it.
80                  */
81                 in.dbp = out.dbp;
82                 in.dbcnt = out.dbcnt;
83         }
84 }
85
86 void
87 def_close(void)
88 {
89         /* Just update the count, everything is already in the buffer. */
90         if (in.dbcnt)
91                 out.dbcnt = in.dbcnt;
92 }
93
94 /*
95  * Copy variable length newline terminated records with a max size cbsz
96  * bytes to output.  Records less than cbs are padded with spaces.
97  *
98  * max in buffer:  MAX(ibs, cbsz)
99  * max out buffer: obs + cbsz
100  */
101 void
102 block(void)
103 {
104         u_char *inp, *outp;
105         const u_char *t;
106         size_t cnt, maxlen;
107         static int intrunc;
108         int ch;
109
110         /*
111          * Record truncation can cross block boundaries.  If currently in a
112          * truncation state, keep tossing characters until reach a newline.
113          * Start at the beginning of the buffer, as the input buffer is always
114          * left empty.
115          */
116         if (intrunc) {
117                 for (inp = in.db, cnt = in.dbrcnt; cnt && *inp++ != '\n'; --cnt)
118                         ;
119                 if (!cnt) {
120                         in.dbcnt = 0;
121                         in.dbp = in.db;
122                         return;
123                 }
124                 intrunc = 0;
125                 /* Adjust the input buffer numbers. */
126                 in.dbcnt = cnt - 1;
127                 in.dbp = inp + cnt - 1;
128         }
129
130         /*
131          * Copy records (max cbsz size chunks) into the output buffer.  The
132          * translation is done as we copy into the output buffer.
133          */
134         ch = 0;
135         for (inp = in.dbp - in.dbcnt, outp = out.dbp; in.dbcnt;) {
136                 maxlen = MIN(cbsz, in.dbcnt);
137                 if ((t = ctab) != NULL)
138                         for (cnt = 0; cnt < maxlen && (ch = *inp++) != '\n';
139                             ++cnt)
140                                 *outp++ = t[ch];
141                 else
142                         for (cnt = 0; cnt < maxlen && (ch = *inp++) != '\n';
143                             ++cnt)
144                                 *outp++ = ch;
145                 /*
146                  * Check for short record without a newline.  Reassemble the
147                  * input block.
148                  */
149                 if (ch != '\n' && in.dbcnt < cbsz) {
150                         (void)memmove(in.db, in.dbp - in.dbcnt, in.dbcnt);
151                         break;
152                 }
153
154                 /* Adjust the input buffer numbers. */
155                 in.dbcnt -= cnt;
156                 if (ch == '\n')
157                         --in.dbcnt;
158
159                 /* Pad short records with spaces. */
160                 if (cnt < cbsz)
161                         (void)memset(outp, ctab ? ctab[' '] : ' ', cbsz - cnt);
162                 else {
163                         /*
164                          * If the next character wouldn't have ended the
165                          * block, it's a truncation.
166                          */
167                         if (!in.dbcnt || *inp != '\n')
168                                 ++st.trunc;
169
170                         /* Toss characters to a newline. */
171                         for (; in.dbcnt && *inp++ != '\n'; --in.dbcnt)
172                                 ;
173                         if (!in.dbcnt)
174                                 intrunc = 1;
175                         else
176                                 --in.dbcnt;
177                 }
178
179                 /* Adjust output buffer numbers. */
180                 out.dbp += cbsz;
181                 if ((out.dbcnt += cbsz) >= out.dbsz)
182                         dd_out(0);
183                 outp = out.dbp;
184         }
185         in.dbp = in.db + in.dbcnt;
186 }
187
188 void
189 block_close(void)
190 {
191         /*
192          * Copy any remaining data into the output buffer and pad to a record.
193          * Don't worry about truncation or translation, the input buffer is
194          * always empty when truncating, and no characters have been added for
195          * translation.  The bottom line is that anything left in the input
196          * buffer is a truncated record.  Anything left in the output buffer
197          * just wasn't big enough.
198          */
199         if (in.dbcnt) {
200                 ++st.trunc;
201                 (void)memmove(out.dbp, in.dbp - in.dbcnt, in.dbcnt);
202                 (void)memset(out.dbp + in.dbcnt, ctab ? ctab[' '] : ' ',
203                     cbsz - in.dbcnt);
204                 out.dbcnt += cbsz;
205         }
206 }
207
208 /*
209  * Convert fixed length (cbsz) records to variable length.  Deletes any
210  * trailing blanks and appends a newline.
211  *
212  * max in buffer:  MAX(ibs, cbsz) + cbsz
213  * max out buffer: obs + cbsz
214  */
215 void
216 unblock(void)
217 {
218         u_char *inp;
219         const u_char *t;
220         size_t cnt;
221
222         /* Translation and case conversion. */
223         if ((t = ctab) != NULL)
224                 for (inp = in.dbp - (cnt = in.dbrcnt); cnt--; ++inp)
225                         *inp = t[*inp];
226         /*
227          * Copy records (max cbsz size chunks) into the output buffer.  The
228          * translation has to already be done or we might not recognize the
229          * spaces.
230          */
231         for (inp = in.db; in.dbcnt >= cbsz; inp += cbsz, in.dbcnt -= cbsz) {
232                 for (t = inp + cbsz - 1; t >= inp && *t == ' '; --t)
233                         ;
234                 if (t >= inp) {
235                         cnt = t - inp + 1;
236                         (void)memmove(out.dbp, inp, cnt);
237                         out.dbp += cnt;
238                         out.dbcnt += cnt;
239                 }
240                 *out.dbp++ = '\n';
241                 if (++out.dbcnt >= out.dbsz)
242                         dd_out(0);
243         }
244         if (in.dbcnt)
245                 (void)memmove(in.db, in.dbp - in.dbcnt, in.dbcnt);
246         in.dbp = in.db + in.dbcnt;
247 }
248
249 void
250 unblock_close(void)
251 {
252         u_char *t;
253         size_t cnt;
254
255         if (in.dbcnt) {
256                 warnx("%s: short input record", in.name);
257                 for (t = in.db + in.dbcnt - 1; t >= in.db && *t == ' '; --t)
258                         ;
259                 if (t >= in.db) {
260                         cnt = t - in.db + 1;
261                         (void)memmove(out.dbp, in.db, cnt);
262                         out.dbp += cnt;
263                         out.dbcnt += cnt;
264                 }
265                 ++out.dbcnt;
266                 *out.dbp++ = '\n';
267         }
268 }