contrib/libarchive/tar/bsdtar.c

   1 /*-
   2  * Copyright (c) 2003-2008 Tim Kientzle
   3  * All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer.
  10  * 2. Redistributions in binary form must reproduce the above copyright
  11  *    notice, this list of conditions and the following disclaimer in the
  12  *    documentation and/or other materials provided with the distribution.
  13  *
  14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR(S) ``AS IS'' AND ANY EXPRESS OR
  15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
  16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
  17  * IN NO EVENT SHALL THE AUTHOR(S) BE LIABLE FOR ANY DIRECT, INDIRECT,
  18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
  19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
  20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
  21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
  22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
  23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  24  */
  25
  26 #include "bsdtar_platform.h"
  27 __FBSDID("$FreeBSD$");
  28
  29 #ifdef HAVE_SYS_PARAM_H
  30 #include <sys/param.h>
  31 #endif
  32 #ifdef HAVE_SYS_STAT_H
  33 #include <sys/stat.h>
  34 #endif
  35 #ifdef HAVE_COPYFILE_H
  36 #include <copyfile.h>
  37 #endif
  38 #ifdef HAVE_ERRNO_H
  39 #include <errno.h>
  40 #endif
  41 #ifdef HAVE_FCNTL_H
  42 #include <fcntl.h>
  43 #endif
  44 #ifdef HAVE_LANGINFO_H
  45 #include <langinfo.h>
  46 #endif
  47 #ifdef HAVE_LOCALE_H
  48 #include <locale.h>
  49 #endif
  50 #ifdef HAVE_PATHS_H
  51 #include <paths.h>
  52 #endif
  53 #ifdef HAVE_SIGNAL_H
  54 #include <signal.h>
  55 #endif
  56 #include <stdio.h>
  57 #ifdef HAVE_STDLIB_H
  58 #include <stdlib.h>
  59 #endif
  60 #ifdef HAVE_STRING_H
  61 #include <string.h>
  62 #endif
  63 #ifdef HAVE_TIME_H
  64 #include <time.h>
  65 #endif
  66 #ifdef HAVE_UNISTD_H
  67 #include <unistd.h>
  68 #endif
  69
  70 #include "bsdtar.h"
  71 #include "err.h"
  72
  73 /*
  74  * Per POSIX.1-1988, tar defaults to reading/writing archives to/from
  75  * the default tape device for the system.  Pick something reasonable here.
  76  */
  77 #ifdef __linux
  78 #define _PATH_DEFTAPE "/dev/st0"
  79 #endif
  80 #if defined(_WIN32) && !defined(__CYGWIN__)
  81 #define _PATH_DEFTAPE "\\\\.\\tape0"
  82 #endif
  83 #if defined(__APPLE__)
  84 #undef _PATH_DEFTAPE
  85 #define _PATH_DEFTAPE "-"  /* Mac OS has no tape support, default to stdio. */
  86 #endif
  87
  88 #ifndef _PATH_DEFTAPE
  89 #define _PATH_DEFTAPE "/dev/tape"
  90 #endif
  91
  92 #ifdef __MINGW32__
  93 int _CRT_glob = 0; /* Disable broken CRT globbing. */
  94 #endif
  95
  96 #if defined(HAVE_SIGACTION) && (defined(SIGINFO) || defined(SIGUSR1))
  97 static volatile int siginfo_occurred;
  98
  99 static void
 100 siginfo_handler(int sig)
 101 {
 102         (void)sig; /* UNUSED */
 103         siginfo_occurred = 1;
 104 }
 105
 106 int
 107 need_report(void)
 108 {
 109         int r = siginfo_occurred;
 110         siginfo_occurred = 0;
 111         return (r);
 112 }
 113 #else
 114 int
 115 need_report(void)
 116 {
 117         return (0);
 118 }
 119 #endif
 120
 121 static void              long_help(void);
 122 static void              only_mode(struct bsdtar *, const char *opt,
 123                              const char *valid);
 124 static void              set_mode(struct bsdtar *, char opt);
 125 static void              version(void);
 126
 127 /* A basic set of security flags to request from libarchive. */
 128 #define SECURITY                                        \
 129         (ARCHIVE_EXTRACT_SECURE_SYMLINKS                \
 130          | ARCHIVE_EXTRACT_SECURE_NODOTDOT)
 131
 132 int
 133 main(int argc, char **argv)
 134 {
 135         struct bsdtar           *bsdtar, bsdtar_storage;
 136         int                      opt, t;
 137         char                     compression, compression2;
 138         const char              *compression_name, *compression2_name;
 139         const char              *compress_program;
 140         char                     option_a, option_o;
 141         char                     possible_help_request;
 142         char                     buff[16];
 143
 144         /*
 145          * Use a pointer for consistency, but stack-allocated storage
 146          * for ease of cleanup.
 147          */
 148         bsdtar = &bsdtar_storage;
 149         memset(bsdtar, 0, sizeof(*bsdtar));
 150         bsdtar->fd = -1; /* Mark as "unused" */
 151         bsdtar->gid = -1;
 152         bsdtar->uid = -1;
 153         option_a = option_o = 0;
 154         compression = compression2 = '\0';
 155         compression_name = compression2_name = NULL;
 156         compress_program = NULL;
 157
 158 #if defined(HAVE_SIGACTION)
 159         { /* Set up signal handling. */
 160                 struct sigaction sa;
 161                 sa.sa_handler = siginfo_handler;
 162                 sigemptyset(&sa.sa_mask);
 163                 sa.sa_flags = 0;
 164 #ifdef SIGINFO
 165                 if (sigaction(SIGINFO, &sa, NULL))
 166                         lafe_errc(1, errno, "sigaction(SIGINFO) failed");
 167 #endif
 168 #ifdef SIGUSR1
 169                 /* ... and treat SIGUSR1 the same way as SIGINFO. */
 170                 if (sigaction(SIGUSR1, &sa, NULL))
 171                         lafe_errc(1, errno, "sigaction(SIGUSR1) failed");
 172 #endif
 173 #ifdef SIGPIPE
 174                 /* Ignore SIGPIPE signals. */
 175                 sa.sa_handler = SIG_IGN;
 176                 sigaction(SIGPIPE, &sa, NULL);
 177 #endif
 178         }
 179 #endif
 180
 181
 182         /* Need lafe_progname before calling lafe_warnc. */
 183         if (*argv == NULL)
 184                 lafe_progname = "bsdtar";
 185         else {
 186 #if defined(_WIN32) && !defined(__CYGWIN__)
 187                 lafe_progname = strrchr(*argv, '\\');
 188                 if (strrchr(*argv, '/') > lafe_progname)
 189 #endif
 190                 lafe_progname = strrchr(*argv, '/');
 191                 if (lafe_progname != NULL)
 192                         lafe_progname++;
 193                 else
 194                         lafe_progname = *argv;
 195         }
 196
 197 #if HAVE_SETLOCALE
 198         if (setlocale(LC_ALL, "") == NULL)
 199                 lafe_warnc(0, "Failed to set default locale");
 200 #endif
 201 #if defined(HAVE_NL_LANGINFO) && defined(HAVE_D_MD_ORDER)
 202         bsdtar->day_first = (*nl_langinfo(D_MD_ORDER) == 'd');
 203 #endif
 204         possible_help_request = 0;
 205
 206         /* Look up uid of current user for future reference */
 207         bsdtar->user_uid = geteuid();
 208
 209         /* Default: open tape drive. */
 210         bsdtar->filename = getenv("TAPE");
 211         if (bsdtar->filename == NULL)
 212                 bsdtar->filename = _PATH_DEFTAPE;
 213
 214         /* Default block size settings. */
 215         bsdtar->bytes_per_block = DEFAULT_BYTES_PER_BLOCK;
 216         /* Allow library to default this unless user specifies -b. */
 217         bsdtar->bytes_in_last_block = -1;
 218
 219         /* Default: preserve mod time on extract */
 220         bsdtar->extract_flags = ARCHIVE_EXTRACT_TIME;
 221
 222         /* Default: Perform basic security checks. */
 223         bsdtar->extract_flags |= SECURITY;
 224
 225 #ifndef _WIN32
 226         /* On POSIX systems, assume --same-owner and -p when run by
 227          * the root user.  This doesn't make any sense on Windows. */
 228         if (bsdtar->user_uid == 0) {
 229                 /* --same-owner */
 230                 bsdtar->extract_flags |= ARCHIVE_EXTRACT_OWNER;
 231                 /* -p */
 232                 bsdtar->extract_flags |= ARCHIVE_EXTRACT_PERM;
 233                 bsdtar->extract_flags |= ARCHIVE_EXTRACT_ACL;
 234                 bsdtar->extract_flags |= ARCHIVE_EXTRACT_XATTR;
 235                 bsdtar->extract_flags |= ARCHIVE_EXTRACT_FFLAGS;
 236                 bsdtar->extract_flags |= ARCHIVE_EXTRACT_MAC_METADATA;
 237         }
 238 #endif
 239
 240         /*
 241          * Enable Mac OS "copyfile()" extension by default.
 242          * This has no effect on other platforms.
 243          */
 244         bsdtar->readdisk_flags |= ARCHIVE_READDISK_MAC_COPYFILE;
 245 #ifdef COPYFILE_DISABLE_VAR
 246         if (getenv(COPYFILE_DISABLE_VAR))
 247                 bsdtar->readdisk_flags &= ~ARCHIVE_READDISK_MAC_COPYFILE;
 248 #endif
 249         bsdtar->matching = archive_match_new();
 250         if (bsdtar->matching == NULL)
 251                 lafe_errc(1, errno, "Out of memory");
 252         bsdtar->cset = cset_new();
 253         if (bsdtar->cset == NULL)
 254                 lafe_errc(1, errno, "Out of memory");
 255
 256         bsdtar->argv = argv;
 257         bsdtar->argc = argc;
 258
 259         /*
 260          * Comments following each option indicate where that option
 261          * originated:  SUSv2, POSIX, GNU tar, star, etc.  If there's
 262          * no such comment, then I don't know of anyone else who
 263          * implements that option.
 264          */
 265         while ((opt = bsdtar_getopt(bsdtar)) != -1) {
 266                 switch (opt) {
 267                 case 'a': /* GNU tar */
 268                         option_a = 1; /* Record it and resolve it later. */
 269                         break;
 270                 case 'B': /* GNU tar */
 271                         /* libarchive doesn't need this; just ignore it. */
 272                         break;
 273                 case 'b': /* SUSv2 */
 274                         t = atoi(bsdtar->argument);
 275                         if (t <= 0 || t > 8192)
 276                                 lafe_errc(1, 0,
 277                                     "Argument to -b is out of range (1..8192)");
 278                         bsdtar->bytes_per_block = 512 * t;
 279                         /* Explicit -b forces last block size. */
 280                         bsdtar->bytes_in_last_block = bsdtar->bytes_per_block;
 281                         break;
 282                 case OPTION_B64ENCODE:
 283                         if (compression2 != '\0')
 284                                 lafe_errc(1, 0,
 285                                     "Can't specify both --uuencode and "
 286                                     "--b64encode");
 287                         compression2 = opt;
 288                         compression2_name = "b64encode";
 289                         break;
 290                 case 'C': /* GNU tar */
 291                         if (strlen(bsdtar->argument) == 0)
 292                                 lafe_errc(1, 0,
 293                                     "Meaningless option: -C ''");
 294
 295                         set_chdir(bsdtar, bsdtar->argument);
 296                         break;
 297                 case 'c': /* SUSv2 */
 298                         set_mode(bsdtar, opt);
 299                         break;
 300                 case OPTION_CHECK_LINKS: /* GNU tar */
 301                         bsdtar->option_warn_links = 1;
 302                         break;
 303                 case OPTION_CHROOT: /* NetBSD */
 304                         bsdtar->option_chroot = 1;
 305                         break;
 306                 case OPTION_DISABLE_COPYFILE: /* Mac OS X */
 307                         bsdtar->readdisk_flags &= ~ARCHIVE_READDISK_MAC_COPYFILE;
 308                         break;
 309                 case OPTION_EXCLUDE: /* GNU tar */
 310                         if (archive_match_exclude_pattern(
 311                             bsdtar->matching, bsdtar->argument) != ARCHIVE_OK)
 312                                 lafe_errc(1, 0,
 313                                     "Couldn't exclude %s\n", bsdtar->argument);
 314                         break;
 315                 case OPTION_FORMAT: /* GNU tar, others */
 316                         cset_set_format(bsdtar->cset, bsdtar->argument);
 317                         break;
 318                 case 'f': /* SUSv2 */
 319                         bsdtar->filename = bsdtar->argument;
 320                         break;
 321                 case OPTION_GID: /* cpio */
 322                         t = atoi(bsdtar->argument);
 323                         if (t < 0)
 324                                 lafe_errc(1, 0,
 325                                     "Argument to --gid must be positive");
 326                         bsdtar->gid = t;
 327                         break;
 328                 case OPTION_GNAME: /* cpio */
 329                         bsdtar->gname = bsdtar->argument;
 330                         break;
 331                 case OPTION_GRZIP:
 332                         if (compression != '\0')
 333                                 lafe_errc(1, 0,
 334                                     "Can't specify both -%c and -%c", opt,
 335                                     compression);
 336                         compression = opt;
 337                         compression_name = "grzip";
 338                         break;
 339                 case 'H': /* BSD convention */
 340                         bsdtar->symlink_mode = 'H';
 341                         break;
 342                 case 'h': /* Linux Standards Base, gtar; synonym for -L */
 343                         bsdtar->symlink_mode = 'L';
 344                         /* Hack: -h by itself is the "help" command. */
 345                         possible_help_request = 1;
 346                         break;
 347                 case OPTION_HELP: /* GNU tar, others */
 348                         long_help();
 349                         exit(0);
 350                         break;
 351                 case OPTION_HFS_COMPRESSION: /* Mac OS X v10.6 or later */
 352                         bsdtar->extract_flags |=
 353                             ARCHIVE_EXTRACT_HFS_COMPRESSION_FORCED;
 354                         break;
 355                 case 'I': /* GNU tar */
 356                         /*
 357                          * TODO: Allow 'names' to come from an archive,
 358                          * not just a text file.  Design a good UI for
 359                          * allowing names and mode/owner to be read
 360                          * from an archive, with contents coming from
 361                          * disk.  This can be used to "refresh" an
 362                          * archive or to design archives with special
 363                          * permissions without having to create those
 364                          * permissions on disk.
 365                          */
 366                         bsdtar->names_from_file = bsdtar->argument;
 367                         break;
 368                 case OPTION_INCLUDE:
 369                         /*
 370                          * No one else has the @archive extension, so
 371                          * no one else needs this to filter entries
 372                          * when transforming archives.
 373                          */
 374                         if (archive_match_include_pattern(bsdtar->matching,
 375                             bsdtar->argument) != ARCHIVE_OK)
 376                                 lafe_errc(1, 0,
 377                                     "Failed to add %s to inclusion list",
 378                                     bsdtar->argument);
 379                         break;
 380                 case 'j': /* GNU tar */
 381                         if (compression != '\0')
 382                                 lafe_errc(1, 0,
 383                                     "Can't specify both -%c and -%c", opt,
 384                                     compression);
 385                         compression = opt;
 386                         compression_name = "bzip2";
 387                         break;
 388                 case 'J': /* GNU tar 1.21 and later */
 389                         if (compression != '\0')
 390                                 lafe_errc(1, 0,
 391                                     "Can't specify both -%c and -%c", opt,
 392                                     compression);
 393                         compression = opt;
 394                         compression_name = "xz";
 395                         break;
 396                 case 'k': /* GNU tar */
 397                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_NO_OVERWRITE;
 398                         break;
 399                 case OPTION_KEEP_NEWER_FILES: /* GNU tar */
 400                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_NO_OVERWRITE_NEWER;
 401                         break;
 402                 case 'L': /* BSD convention */
 403                         bsdtar->symlink_mode = 'L';
 404                         break;
 405                 case 'l': /* SUSv2 and GNU tar beginning with 1.16 */
 406                         /* GNU tar 1.13  used -l for --one-file-system */
 407                         bsdtar->option_warn_links = 1;
 408                         break;
 409                 case OPTION_LRZIP:
 410                 case OPTION_LZIP: /* GNU tar beginning with 1.23 */
 411                 case OPTION_LZMA: /* GNU tar beginning with 1.20 */
 412                 case OPTION_LZOP: /* GNU tar beginning with 1.21 */
 413                         if (compression != '\0')
 414                                 lafe_errc(1, 0,
 415                                     "Can't specify both -%c and -%c", opt,
 416                                     compression);
 417                         compression = opt;
 418                         switch (opt) {
 419                         case OPTION_LRZIP: compression_name = "lrzip"; break;
 420                         case OPTION_LZIP: compression_name = "lzip"; break;
 421                         case OPTION_LZMA: compression_name = "lzma"; break;
 422                         case OPTION_LZOP: compression_name = "lzop"; break;
 423                         }
 424                         break;
 425                 case 'm': /* SUSv2 */
 426                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_TIME;
 427                         break;
 428                 case 'n': /* GNU tar */
 429                         bsdtar->option_no_subdirs = 1;
 430                         break;
 431                 /*
 432                  * Selecting files by time:
 433                  *    --newer-?time='date' Only files newer than 'date'
 434                  *    --newer-?time-than='file' Only files newer than time
 435                  *         on specified file (useful for incremental backups)
 436                  */
 437                 case OPTION_NEWER_CTIME: /* GNU tar */
 438                         if (archive_match_include_date(bsdtar->matching,
 439                             ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_NEWER,
 440                             bsdtar->argument) != ARCHIVE_OK)
 441                                 lafe_errc(1, 0, "Error : %s",
 442                                     archive_error_string(bsdtar->matching));
 443                         break;
 444                 case OPTION_NEWER_CTIME_THAN:
 445                         if (archive_match_include_file_time(bsdtar->matching,
 446                             ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_NEWER,
 447                             bsdtar->argument) != ARCHIVE_OK)
 448                                 lafe_errc(1, 0, "Error : %s",
 449                                     archive_error_string(bsdtar->matching));
 450                         break;
 451                 case OPTION_NEWER_MTIME: /* GNU tar */
 452                         if (archive_match_include_date(bsdtar->matching,
 453                             ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_NEWER,
 454                             bsdtar->argument) != ARCHIVE_OK)
 455                                 lafe_errc(1, 0, "Error : %s",
 456                                     archive_error_string(bsdtar->matching));
 457                         break;
 458                 case OPTION_NEWER_MTIME_THAN:
 459                         if (archive_match_include_file_time(bsdtar->matching,
 460                             ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_NEWER,
 461                             bsdtar->argument) != ARCHIVE_OK)
 462                                 lafe_errc(1, 0, "Error : %s",
 463                                     archive_error_string(bsdtar->matching));
 464                         break;
 465                 case OPTION_NODUMP: /* star */
 466                         bsdtar->readdisk_flags |= ARCHIVE_READDISK_HONOR_NODUMP;
 467                         break;
 468                 case OPTION_NOPRESERVE_HFS_COMPRESSION:
 469                         /* Mac OS X v10.6 or later */
 470                         bsdtar->extract_flags |=
 471                             ARCHIVE_EXTRACT_NO_HFS_COMPRESSION;
 472                         break;
 473                 case OPTION_NO_SAME_OWNER: /* GNU tar */
 474                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_OWNER;
 475                         break;
 476                 case OPTION_NO_SAME_PERMISSIONS: /* GNU tar */
 477                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_PERM;
 478                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_ACL;
 479                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_XATTR;
 480                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_FFLAGS;
 481                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_MAC_METADATA;
 482                         break;
 483                 case OPTION_NULL: /* GNU tar */
 484                         bsdtar->option_null++;
 485                         break;
 486                 case OPTION_NUMERIC_OWNER: /* GNU tar */
 487                         bsdtar->uname = "";
 488                         bsdtar->gname = "";
 489                         bsdtar->option_numeric_owner++;
 490                         break;
 491                 case 'O': /* GNU tar */
 492                         bsdtar->option_stdout = 1;
 493                         break;
 494                 case 'o': /* SUSv2 and GNU conflict here, but not fatally */
 495                         option_o = 1; /* Record it and resolve it later. */
 496                         break;
 497                 /*
 498                  * Selecting files by time:
 499                  *    --older-?time='date' Only files older than 'date'
 500                  *    --older-?time-than='file' Only files older than time
 501                  *         on specified file
 502                  */
 503                 case OPTION_OLDER_CTIME:
 504                         if (archive_match_include_date(bsdtar->matching,
 505                             ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_OLDER,
 506                             bsdtar->argument) != ARCHIVE_OK)
 507                                 lafe_errc(1, 0, "Error : %s",
 508                                     archive_error_string(bsdtar->matching));
 509                         break;
 510                 case OPTION_OLDER_CTIME_THAN:
 511                         if (archive_match_include_file_time(bsdtar->matching,
 512                             ARCHIVE_MATCH_CTIME | ARCHIVE_MATCH_OLDER,
 513                             bsdtar->argument) != ARCHIVE_OK)
 514                                 lafe_errc(1, 0, "Error : %s",
 515                                     archive_error_string(bsdtar->matching));
 516                         break;
 517                 case OPTION_OLDER_MTIME:
 518                         if (archive_match_include_date(bsdtar->matching,
 519                             ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_OLDER,
 520                             bsdtar->argument) != ARCHIVE_OK)
 521                                 lafe_errc(1, 0, "Error : %s",
 522                                     archive_error_string(bsdtar->matching));
 523                         break;
 524                 case OPTION_OLDER_MTIME_THAN:
 525                         if (archive_match_include_file_time(bsdtar->matching,
 526                             ARCHIVE_MATCH_MTIME | ARCHIVE_MATCH_OLDER,
 527                             bsdtar->argument) != ARCHIVE_OK)
 528                                 lafe_errc(1, 0, "Error : %s",
 529                                     archive_error_string(bsdtar->matching));
 530                         break;
 531                 case OPTION_ONE_FILE_SYSTEM: /* GNU tar */
 532                         bsdtar->readdisk_flags |=
 533                             ARCHIVE_READDISK_NO_TRAVERSE_MOUNTS;
 534                         break;
 535                 case OPTION_OPTIONS:
 536                         bsdtar->option_options = bsdtar->argument;
 537                         break;
 538 #if 0
 539                 /*
 540                  * The common BSD -P option is not necessary, since
 541                  * our default is to archive symlinks, not follow
 542                  * them.  This is convenient, as -P conflicts with GNU
 543                  * tar anyway.
 544                  */
 545                 case 'P': /* BSD convention */
 546                         /* Default behavior, no option necessary. */
 547                         break;
 548 #endif
 549                 case 'P': /* GNU tar */
 550                         bsdtar->extract_flags &= ~SECURITY;
 551                         bsdtar->option_absolute_paths = 1;
 552                         break;
 553                 case 'p': /* GNU tar, star */
 554                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_PERM;
 555                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_ACL;
 556                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_XATTR;
 557                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_FFLAGS;
 558                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_MAC_METADATA;
 559                         break;
 560                 case OPTION_POSIX: /* GNU tar */
 561                         cset_set_format(bsdtar->cset, "pax");
 562                         break;
 563                 case 'q': /* FreeBSD GNU tar --fast-read, NetBSD -q */
 564                         bsdtar->option_fast_read = 1;
 565                         break;
 566                 case 'r': /* SUSv2 */
 567                         set_mode(bsdtar, opt);
 568                         break;
 569                 case 'S': /* NetBSD pax-as-tar */
 570                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_SPARSE;
 571                         break;
 572                 case 's': /* NetBSD pax-as-tar */
 573 #if defined(HAVE_REGEX_H) || defined(HAVE_PCREPOSIX_H)
 574                         add_substitution(bsdtar, bsdtar->argument);
 575 #else
 576                         lafe_warnc(0,
 577                             "-s is not supported by this version of bsdtar");
 578                         usage();
 579 #endif
 580                         break;
 581                 case OPTION_SAME_OWNER: /* GNU tar */
 582                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_OWNER;
 583                         break;
 584                 case OPTION_STRIP_COMPONENTS: /* GNU tar 1.15 */
 585                         errno = 0;
 586                         bsdtar->strip_components = strtol(bsdtar->argument,
 587                             NULL, 0);
 588                         if (errno)
 589                                 lafe_errc(1, 0,
 590                                     "Invalid --strip-components argument: %s",
 591                                     bsdtar->argument);
 592                         break;
 593                 case 'T': /* GNU tar */
 594                         bsdtar->names_from_file = bsdtar->argument;
 595                         break;
 596                 case 't': /* SUSv2 */
 597                         set_mode(bsdtar, opt);
 598                         bsdtar->verbose++;
 599                         break;
 600                 case OPTION_TOTALS: /* GNU tar */
 601                         bsdtar->option_totals++;
 602                         break;
 603                 case 'U': /* GNU tar */
 604                         bsdtar->extract_flags |= ARCHIVE_EXTRACT_UNLINK;
 605                         bsdtar->option_unlink_first = 1;
 606                         break;
 607                 case 'u': /* SUSv2 */
 608                         set_mode(bsdtar, opt);
 609                         break;
 610                 case OPTION_UID: /* cpio */
 611                         t = atoi(bsdtar->argument);
 612                         if (t < 0)
 613                                 lafe_errc(1, 0,
 614                                     "Argument to --uid must be positive");
 615                         bsdtar->uid = t;
 616                         break;
 617                 case OPTION_UNAME: /* cpio */
 618                         bsdtar->uname = bsdtar->argument;
 619                         break;
 620                 case OPTION_UUENCODE:
 621                         if (compression2 != '\0')
 622                                 lafe_errc(1, 0,
 623                                     "Can't specify both --uuencode and "
 624                                     "--b64encode");
 625                         compression2 = opt;
 626                         compression2_name = "uuencode";
 627                         break;
 628                 case 'v': /* SUSv2 */
 629                         bsdtar->verbose++;
 630                         break;
 631                 case OPTION_VERSION: /* GNU convention */
 632                         version();
 633                         break;
 634 #if 0
 635                 /*
 636                  * The -W longopt feature is handled inside of
 637                  * bsdtar_getopt(), so -W is not available here.
 638                  */
 639                 case 'W': /* Obscure GNU convention. */
 640                         break;
 641 #endif
 642                 case 'w': /* SUSv2 */
 643                         bsdtar->option_interactive = 1;
 644                         break;
 645                 case 'X': /* GNU tar */
 646                         if (archive_match_exclude_pattern_from_file(
 647                             bsdtar->matching, bsdtar->argument, 0)
 648                             != ARCHIVE_OK)
 649                                 lafe_errc(1, 0, "Error : %s",
 650                                     archive_error_string(bsdtar->matching));
 651                         break;
 652                 case 'x': /* SUSv2 */
 653                         set_mode(bsdtar, opt);
 654                         break;
 655                 case 'y': /* FreeBSD version of GNU tar */
 656                         if (compression != '\0')
 657                                 lafe_errc(1, 0,
 658                                     "Can't specify both -%c and -%c", opt,
 659                                     compression);
 660                         compression = opt;
 661                         compression_name = "bzip2";
 662                         break;
 663                 case 'Z': /* GNU tar */
 664                         if (compression != '\0')
 665                                 lafe_errc(1, 0,
 666                                     "Can't specify both -%c and -%c", opt,
 667                                     compression);
 668                         compression = opt;
 669                         compression_name = "compress";
 670                         break;
 671                 case 'z': /* GNU tar, star, many others */
 672                         if (compression != '\0')
 673                                 lafe_errc(1, 0,
 674                                     "Can't specify both -%c and -%c", opt,
 675                                     compression);
 676                         compression = opt;
 677                         compression_name = "gzip";
 678                         break;
 679                 case OPTION_USE_COMPRESS_PROGRAM:
 680                         compress_program = bsdtar->argument;
 681                         break;
 682                 default:
 683                         usage();
 684                 }
 685         }
 686
 687         /*
 688          * Sanity-check options.
 689          */
 690
 691         /* If no "real" mode was specified, treat -h as --help. */
 692         if ((bsdtar->mode == '\0') && possible_help_request) {
 693                 long_help();
 694                 exit(0);
 695         }
 696
 697         /* Otherwise, a mode is required. */
 698         if (bsdtar->mode == '\0')
 699                 lafe_errc(1, 0,
 700                     "Must specify one of -c, -r, -t, -u, -x");
 701
 702         /* Check boolean options only permitted in certain modes. */
 703         if (option_a)
 704                 only_mode(bsdtar, "-a", "c");
 705         if (bsdtar->readdisk_flags & ARCHIVE_READDISK_NO_TRAVERSE_MOUNTS)
 706                 only_mode(bsdtar, "--one-file-system", "cru");
 707         if (bsdtar->option_fast_read)
 708                 only_mode(bsdtar, "--fast-read", "xt");
 709         if (bsdtar->extract_flags & ARCHIVE_EXTRACT_HFS_COMPRESSION_FORCED)
 710                 only_mode(bsdtar, "--hfsCompression", "x");
 711         if (bsdtar->extract_flags & ARCHIVE_EXTRACT_NO_HFS_COMPRESSION)
 712                 only_mode(bsdtar, "--nopreserveHFSCompression", "x");
 713         if (bsdtar->readdisk_flags & ARCHIVE_READDISK_HONOR_NODUMP)
 714                 only_mode(bsdtar, "--nodump", "cru");
 715         if (option_o > 0) {
 716                 switch (bsdtar->mode) {
 717                 case 'c':
 718                         /*
 719                          * In GNU tar, -o means "old format."  The
 720                          * "ustar" format is the closest thing
 721                          * supported by libarchive.
 722                          */
 723                         cset_set_format(bsdtar->cset, "ustar");
 724                         /* TODO: bsdtar->create_format = "v7"; */
 725                         break;
 726                 case 'x':
 727                         /* POSIX-compatible behavior. */
 728                         bsdtar->option_no_owner = 1;
 729                         bsdtar->extract_flags &= ~ARCHIVE_EXTRACT_OWNER;
 730                         break;
 731                 default:
 732                         only_mode(bsdtar, "-o", "xc");
 733                         break;
 734                 }
 735         }
 736         if (bsdtar->option_no_subdirs)
 737                 only_mode(bsdtar, "-n", "cru");
 738         if (bsdtar->option_stdout)
 739                 only_mode(bsdtar, "-O", "xt");
 740         if (bsdtar->option_unlink_first)
 741                 only_mode(bsdtar, "-U", "x");
 742         if (bsdtar->option_warn_links)
 743                 only_mode(bsdtar, "--check-links", "cr");
 744
 745         if (option_a && cset_auto_compress(bsdtar->cset, bsdtar->filename)) {
 746                 /* Ignore specified compressions if auto-compress works. */
 747                 compression = '\0';
 748                 compression2 = '\0';
 749         }
 750         /* Check other parameters only permitted in certain modes. */
 751         if (compress_program != NULL) {
 752                 only_mode(bsdtar, "--use-compress-program", "cxt");
 753                 cset_add_filter_program(bsdtar->cset, compress_program);
 754                 /* Ignore specified compressions. */
 755                 compression = '\0';
 756                 compression2 = '\0';
 757         }
 758         if (compression != '\0') {
 759                 switch (compression) {
 760                 case 'J': case 'j': case 'y': case 'Z': case 'z':
 761                         strcpy(buff, "-?");
 762                         buff[1] = compression;
 763                         break;
 764                 default:
 765                         strcpy(buff, "--");
 766                         strcat(buff, compression_name);
 767                         break;
 768                 }
 769                 only_mode(bsdtar, buff, "cxt");
 770                 cset_add_filter(bsdtar->cset, compression_name);
 771         }
 772         if (compression2 != '\0') {
 773                 strcpy(buff, "--");
 774                 strcat(buff, compression2_name);
 775                 only_mode(bsdtar, buff, "cxt");
 776                 cset_add_filter(bsdtar->cset, compression2_name);
 777         }
 778         if (cset_get_format(bsdtar->cset) != NULL)
 779                 only_mode(bsdtar, "--format", "cru");
 780         if (bsdtar->symlink_mode != '\0') {
 781                 strcpy(buff, "-?");
 782                 buff[1] = bsdtar->symlink_mode;
 783                 only_mode(bsdtar, buff, "cru");
 784         }
 785
 786         /* Filename "-" implies stdio. */
 787         if (strcmp(bsdtar->filename, "-") == 0)
 788                 bsdtar->filename = NULL;
 789
 790         switch(bsdtar->mode) {
 791         case 'c':
 792                 tar_mode_c(bsdtar);
 793                 break;
 794         case 'r':
 795                 tar_mode_r(bsdtar);
 796                 break;
 797         case 't':
 798                 tar_mode_t(bsdtar);
 799                 break;
 800         case 'u':
 801                 tar_mode_u(bsdtar);
 802                 break;
 803         case 'x':
 804                 tar_mode_x(bsdtar);
 805                 break;
 806         }
 807
 808         archive_match_free(bsdtar->matching);
 809 #if defined(HAVE_REGEX_H) || defined(HAVE_PCREPOSIX_H)
 810         cleanup_substitution(bsdtar);
 811 #endif
 812         cset_free(bsdtar->cset);
 813
 814         if (bsdtar->return_value != 0)
 815                 lafe_warnc(0,
 816                     "Error exit delayed from previous errors.");
 817         return (bsdtar->return_value);
 818 }
 819
 820 static void
 821 set_mode(struct bsdtar *bsdtar, char opt)
 822 {
 823         if (bsdtar->mode != '\0' && bsdtar->mode != opt)
 824                 lafe_errc(1, 0,
 825                     "Can't specify both -%c and -%c", opt, bsdtar->mode);
 826         bsdtar->mode = opt;
 827 }
 828
 829 /*
 830  * Verify that the mode is correct.
 831  */
 832 static void
 833 only_mode(struct bsdtar *bsdtar, const char *opt, const char *valid_modes)
 834 {
 835         if (strchr(valid_modes, bsdtar->mode) == NULL)
 836                 lafe_errc(1, 0,
 837                     "Option %s is not permitted in mode -%c",
 838                     opt, bsdtar->mode);
 839 }
 840
 841
 842 void
 843 usage(void)
 844 {
 845         const char      *p;
 846
 847         p = lafe_progname;
 848
 849         fprintf(stderr, "Usage:\n");
 850         fprintf(stderr, "  List:    %s -tf <archive-filename>\n", p);
 851         fprintf(stderr, "  Extract: %s -xf <archive-filename>\n", p);
 852         fprintf(stderr, "  Create:  %s -cf <archive-filename> [filenames...]\n", p);
 853         fprintf(stderr, "  Help:    %s --help\n", p);
 854         exit(1);
 855 }
 856
 857 static void
 858 version(void)
 859 {
 860         printf("bsdtar %s - %s\n",
 861             BSDTAR_VERSION_STRING,
 862             archive_version_string());
 863         exit(0);
 864 }
 865
 866 static const char *long_help_msg =
 867         "First option must be a mode specifier:\n"
 868         "  -c Create  -r Add/Replace  -t List  -u Update  -x Extract\n"
 869         "Common Options:\n"
 870         "  -b #  Use # 512-byte records per I/O block\n"
 871         "  -f <filename>  Location of archive (default " _PATH_DEFTAPE ")\n"
 872         "  -v    Verbose\n"
 873         "  -w    Interactive\n"
 874         "Create: %p -c [options] [<file> | <dir> | @<archive> | -C <dir> ]\n"
 875         "  <file>, <dir>  add these items to archive\n"
 876         "  -z, -j, -J, --lzma  Compress archive with gzip/bzip2/xz/lzma\n"
 877         "  --format {ustar|pax|cpio|shar}  Select archive format\n"
 878         "  --exclude <pattern>  Skip files that match pattern\n"
 879         "  -C <dir>  Change to <dir> before processing remaining files\n"
 880         "  @<archive>  Add entries from <archive> to output\n"
 881         "List: %p -t [options] [<patterns>]\n"
 882         "  <patterns>  If specified, list only entries that match\n"
 883         "Extract: %p -x [options] [<patterns>]\n"
 884         "  <patterns>  If specified, extract only entries that match\n"
 885         "  -k    Keep (don't overwrite) existing files\n"
 886         "  -m    Don't restore modification times\n"
 887         "  -O    Write entries to stdout, don't restore to disk\n"
 888         "  -p    Restore permissions (including ACLs, owner, file flags)\n";
 889
 890
 891 /*
 892  * Note that the word 'bsdtar' will always appear in the first line
 893  * of output.
 894  *
 895  * In particular, /bin/sh scripts that need to test for the presence
 896  * of bsdtar can use the following template:
 897  *
 898  * if (tar --help 2>&1 | grep bsdtar >/dev/null 2>&1 ) then \
 899  *          echo bsdtar; else echo not bsdtar; fi
 900  */
 901 static void
 902 long_help(void)
 903 {
 904         const char      *prog;
 905         const char      *p;
 906
 907         prog = lafe_progname;
 908
 909         fflush(stderr);
 910
 911         p = (strcmp(prog,"bsdtar") != 0) ? "(bsdtar)" : "";
 912         printf("%s%s: manipulate archive files\n", prog, p);
 913
 914         for (p = long_help_msg; *p != '\0'; p++) {
 915                 if (*p == '%') {
 916                         if (p[1] == 'p') {
 917                                 fputs(prog, stdout);
 918                                 p++;
 919                         } else
 920                                 putchar('%');
 921                 } else
 922                         putchar(*p);
 923         }
 924         version();
 925 }