1 //===-- BreakpointResolverFileLine.cpp --------------------------*- C++ -*-===//
3 // The LLVM Compiler Infrastructure
5 // This file is distributed under the University of Illinois Open Source
6 // License. See LICENSE.TXT for details.
8 //===----------------------------------------------------------------------===//
10 #include "lldb/Breakpoint/BreakpointResolverFileLine.h"
14 // Other libraries and framework includes
16 #include "lldb/Breakpoint/BreakpointLocation.h"
17 #include "lldb/Core/Log.h"
18 #include "lldb/Core/Module.h"
19 #include "lldb/Core/StreamString.h"
20 #include "lldb/Symbol/CompileUnit.h"
21 #include "lldb/Symbol/Function.h"
22 #include "lldb/lldb-private-log.h"
25 using namespace lldb_private;
27 //----------------------------------------------------------------------
28 // BreakpointResolverFileLine:
29 //----------------------------------------------------------------------
30 BreakpointResolverFileLine::BreakpointResolverFileLine
33 const FileSpec &file_spec,
38 BreakpointResolver (bkpt, BreakpointResolver::FileLineResolver),
39 m_file_spec (file_spec),
40 m_line_number (line_no),
41 m_inlines (check_inlines),
42 m_skip_prologue(skip_prologue)
46 BreakpointResolverFileLine::~BreakpointResolverFileLine ()
50 Searcher::CallbackReturn
51 BreakpointResolverFileLine::SearchCallback
54 SymbolContext &context,
59 SymbolContextList sc_list;
61 assert (m_breakpoint != NULL);
62 Log *log(lldb_private::GetLogIfAllCategoriesSet (LIBLLDB_LOG_BREAKPOINTS));
64 // There is a tricky bit here. You can have two compilation units that #include the same file, and
65 // in one of them the function at m_line_number is used (and so code and a line entry for it is generated) but in the
66 // other it isn't. If we considered the CU's independently, then in the second inclusion, we'd move the breakpoint
67 // to the next function that actually generated code in the header file. That would end up being confusing.
68 // So instead, we do the CU iterations by hand here, then scan through the complete list of matches, and figure out
69 // the closest line number match, and only set breakpoints on that match.
71 // Note also that if file_spec only had a file name and not a directory, there may be many different file spec's in
72 // the resultant list. The closest line match for one will not be right for some totally different file.
73 // So we go through the match list and pull out the sets that have the same file spec in their line_entry
74 // and treat each set separately.
76 const size_t num_comp_units = context.module_sp->GetNumCompileUnits();
77 for (size_t i = 0; i < num_comp_units; i++)
79 CompUnitSP cu_sp (context.module_sp->GetCompileUnitAtIndex (i));
82 if (filter.CompUnitPasses(*cu_sp))
83 cu_sp->ResolveSymbolContext (m_file_spec, m_line_number, m_inlines, false, eSymbolContextEverything, sc_list);
87 while (sc_list.GetSize() > 0)
89 SymbolContextList tmp_sc_list;
90 unsigned current_idx = 0;
92 bool first_entry = true;
94 FileSpec match_file_spec;
95 uint32_t closest_line_number = UINT32_MAX;
97 // Pull out the first entry, and all the others that match its file spec, and stuff them in the tmp list.
98 while (current_idx < sc_list.GetSize())
102 sc_list.GetContextAtIndex (current_idx, sc);
105 match_file_spec = sc.line_entry.file;
110 matches = (sc.line_entry.file == match_file_spec);
114 tmp_sc_list.Append (sc);
115 sc_list.RemoveContextAtIndex(current_idx);
117 // ResolveSymbolContext will always return a number that is >= the line number you pass in.
118 // So the smaller line number is always better.
119 if (sc.line_entry.line < closest_line_number)
120 closest_line_number = sc.line_entry.line;
126 // Okay, we've found the closest line number match, now throw away all the others:
129 while (current_idx < tmp_sc_list.GetSize())
131 if (tmp_sc_list.GetContextAtIndex(current_idx, sc))
133 if (sc.line_entry.line != closest_line_number)
134 tmp_sc_list.RemoveContextAtIndex(current_idx);
140 // Next go through and see if there are line table entries that are contiguous, and if so keep only the
141 // first of the contiguous range:
143 lldb::addr_t last_end_addr = LLDB_INVALID_ADDRESS;
145 while (current_idx < tmp_sc_list.GetSize())
147 if (tmp_sc_list.GetContextAtIndex(current_idx, sc))
149 lldb::addr_t start_file_addr = sc.line_entry.range.GetBaseAddress().GetFileAddress();
150 lldb::addr_t end_file_addr = start_file_addr + sc.line_entry.range.GetByteSize();
152 if (start_file_addr == last_end_addr)
153 tmp_sc_list.RemoveContextAtIndex(current_idx);
157 last_end_addr = end_file_addr;
161 // and make breakpoints out of the closest line number match.
163 uint32_t tmp_sc_list_size = tmp_sc_list.GetSize();
165 for (uint32_t i = 0; i < tmp_sc_list_size; i++)
167 if (tmp_sc_list.GetContextAtIndex(i, sc))
169 Address line_start = sc.line_entry.range.GetBaseAddress();
170 if (line_start.IsValid())
172 if (filter.AddressPasses(line_start))
174 // If the line number is before the prologue end, move it there...
175 bool skipped_prologue = false;
180 Address prologue_addr(sc.function->GetAddressRange().GetBaseAddress());
181 if (prologue_addr.IsValid() && (line_start == prologue_addr))
183 const uint32_t prologue_byte_size = sc.function->GetPrologueByteSize();
184 if (prologue_byte_size)
186 prologue_addr.Slide(prologue_byte_size);
188 if (filter.AddressPasses(prologue_addr))
190 skipped_prologue = true;
191 line_start = prologue_addr;
198 BreakpointLocationSP bp_loc_sp (m_breakpoint->AddLocation(line_start));
199 if (log && bp_loc_sp && !m_breakpoint->IsInternal())
202 bp_loc_sp->GetDescription (&s, lldb::eDescriptionLevelVerbose);
203 log->Printf ("Added location (skipped prologue: %s): %s \n", skipped_prologue ? "yes" : "no", s.GetData());
208 log->Printf ("Breakpoint at file address 0x%" PRIx64 " for %s:%d didn't pass the filter.\n",
209 line_start.GetFileAddress(),
210 m_file_spec.GetFilename().AsCString("<Unknown>"),
217 log->Printf ("error: Unable to set breakpoint at file address 0x%" PRIx64 " for %s:%d\n",
218 line_start.GetFileAddress(),
219 m_file_spec.GetFilename().AsCString("<Unknown>"),
226 return Searcher::eCallbackReturnContinue;
230 BreakpointResolverFileLine::GetDepth()
232 return Searcher::eDepthModule;
236 BreakpointResolverFileLine::GetDescription (Stream *s)
238 s->Printf ("file = '%s', line = %u", m_file_spec.GetPath().c_str(), m_line_number);
242 BreakpointResolverFileLine::Dump (Stream *s) const