contrib/openpam/doc/man/Makefile.in

   1 # Makefile.in generated by automake 1.14 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # $Id: Makefile.am 720 2013-08-19 16:02:10Z des $
  18 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  19 am__make_running_with_option = \
  20   case $${target_option-} in \
  21       ?) ;; \
  22       *) echo "am__make_running_with_option: internal error: invalid" \
  23               "target option '$${target_option-}' specified" >&2; \
  24          exit 1;; \
  25   esac; \
  26   has_opt=no; \
  27   sane_makeflags=$$MAKEFLAGS; \
  28   if $(am__is_gnu_make); then \
  29     sane_makeflags=$$MFLAGS; \
  30   else \
  31     case $$MAKEFLAGS in \
  32       *\\[\ \   ]*) \
  33         bs=\\; \
  34         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  35           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  36     esac; \
  37   fi; \
  38   skip_next=no; \
  39   strip_trailopt () \
  40   { \
  41     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  42   }; \
  43   for flg in $$sane_makeflags; do \
  44     test $$skip_next = yes && { skip_next=no; continue; }; \
  45     case $$flg in \
  46       *=*|--*) continue;; \
  47         -*I) strip_trailopt 'I'; skip_next=yes;; \
  48       -*I?*) strip_trailopt 'I';; \
  49         -*O) strip_trailopt 'O'; skip_next=yes;; \
  50       -*O?*) strip_trailopt 'O';; \
  51         -*l) strip_trailopt 'l'; skip_next=yes;; \
  52       -*l?*) strip_trailopt 'l';; \
  53       -[dEDm]) skip_next=yes;; \
  54       -[JT]) skip_next=yes;; \
  55     esac; \
  56     case $$flg in \
  57       *$$target_option*) has_opt=yes; break;; \
  58     esac; \
  59   done; \
  60   test $$has_opt = yes
  61 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  62 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  63 pkgdatadir = $(datadir)/@PACKAGE@
  64 pkgincludedir = $(includedir)/@PACKAGE@
  65 pkglibdir = $(libdir)/@PACKAGE@
  66 pkglibexecdir = $(libexecdir)/@PACKAGE@
  67 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  68 install_sh_DATA = $(install_sh) -c -m 644
  69 install_sh_PROGRAM = $(install_sh) -c
  70 install_sh_SCRIPT = $(install_sh) -c
  71 INSTALL_HEADER = $(INSTALL_DATA)
  72 transform = $(program_transform_name)
  73 NORMAL_INSTALL = :
  74 PRE_INSTALL = :
  75 POST_INSTALL = :
  76 NORMAL_UNINSTALL = :
  77 PRE_UNINSTALL = :
  78 POST_UNINSTALL = :
  79 build_triplet = @build@
  80 host_triplet = @host@
  81 subdir = doc/man
  82 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
  83         $(dist_man3_MANS) $(dist_man5_MANS)
  84 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  85 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
  86         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  87         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  88         $(top_srcdir)/configure.ac
  89 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  90         $(ACLOCAL_M4)
  91 mkinstalldirs = $(install_sh) -d
  92 CONFIG_HEADER = $(top_builddir)/config.h
  93 CONFIG_CLEAN_FILES =
  94 CONFIG_CLEAN_VPATH_FILES =
  95 AM_V_P = $(am__v_P_@AM_V@)
  96 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  97 am__v_P_0 = false
  98 am__v_P_1 = :
  99 AM_V_GEN = $(am__v_GEN_@AM_V@)
 100 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 101 am__v_GEN_0 = @echo "  GEN     " $@;
 102 am__v_GEN_1 =
 103 AM_V_at = $(am__v_at_@AM_V@)
 104 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 105 am__v_at_0 = @
 106 am__v_at_1 =
 107 SOURCES =
 108 DIST_SOURCES =
 109 am__can_run_installinfo = \
 110   case $$AM_UPDATE_INFO_DIR in \
 111     n|no|NO) false;; \
 112     *) (install-info --version) >/dev/null 2>&1;; \
 113   esac
 114 am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
 115 am__vpath_adj = case $$p in \
 116     $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
 117     *) f=$$p;; \
 118   esac;
 119 am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
 120 am__install_max = 40
 121 am__nobase_strip_setup = \
 122   srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
 123 am__nobase_strip = \
 124   for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
 125 am__nobase_list = $(am__nobase_strip_setup); \
 126   for p in $$list; do echo "$$p $$p"; done | \
 127   sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
 128   $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
 129     if (++n[$$2] == $(am__install_max)) \
 130       { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
 131     END { for (dir in files) print dir, files[dir] }'
 132 am__base_list = \
 133   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
 134   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 135 am__uninstall_files_from_dir = { \
 136   test -z "$$files" \
 137     || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
 138     || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
 139          $(am__cd) "$$dir" && rm -f $$files; }; \
 140   }
 141 man3dir = $(mandir)/man3
 142 am__installdirs = "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"
 143 man5dir = $(mandir)/man5
 144 NROFF = nroff
 145 MANS = $(dist_man3_MANS) $(dist_man5_MANS)
 146 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 147 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 148 VPATH = $(LIBSRCDIR) $(srcdir)
 149 ACLOCAL = @ACLOCAL@
 150 AMTAR = @AMTAR@
 151 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 152 AR = @AR@
 153 AUTOCONF = @AUTOCONF@
 154 AUTOHEADER = @AUTOHEADER@
 155 AUTOMAKE = @AUTOMAKE@
 156 AWK = @AWK@
 157 CC = @CC@
 158 CCDEPMODE = @CCDEPMODE@
 159 CFLAGS = @CFLAGS@
 160 CPP = @CPP@
 161 CPPFLAGS = @CPPFLAGS@
 162 CRYPTO_LIBS = @CRYPTO_LIBS@
 163 CRYPT_LIBS = @CRYPT_LIBS@
 164 CYGPATH_W = @CYGPATH_W@
 165 DEFS = @DEFS@
 166 DEPDIR = @DEPDIR@
 167 DLLTOOL = @DLLTOOL@
 168 DL_LIBS = @DL_LIBS@
 169 DSYMUTIL = @DSYMUTIL@
 170 DUMPBIN = @DUMPBIN@
 171 ECHO_C = @ECHO_C@
 172 ECHO_N = @ECHO_N@
 173 ECHO_T = @ECHO_T@
 174 EGREP = @EGREP@
 175 EXEEXT = @EXEEXT@
 176 FGREP = @FGREP@
 177 GREP = @GREP@
 178 INSTALL = @INSTALL@
 179 INSTALL_DATA = @INSTALL_DATA@
 180 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 181 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 182 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 183 LD = @LD@
 184 LDFLAGS = @LDFLAGS@
 185 LIBOBJS = @LIBOBJS@
 186 LIBS = @LIBS@
 187 LIBTOOL = @LIBTOOL@
 188 LIB_MAJ = @LIB_MAJ@
 189 LIPO = @LIPO@
 190 LN_S = @LN_S@
 191 LTLIBOBJS = @LTLIBOBJS@
 192 MAKEINFO = @MAKEINFO@
 193 MANIFEST_TOOL = @MANIFEST_TOOL@
 194 MKDIR_P = @MKDIR_P@
 195 NM = @NM@
 196 NMEDIT = @NMEDIT@
 197 OBJDUMP = @OBJDUMP@
 198 OBJEXT = @OBJEXT@
 199 OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
 200 OTOOL = @OTOOL@
 201 OTOOL64 = @OTOOL64@
 202 PACKAGE = @PACKAGE@
 203 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 204 PACKAGE_NAME = @PACKAGE_NAME@
 205 PACKAGE_STRING = @PACKAGE_STRING@
 206 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 207 PACKAGE_URL = @PACKAGE_URL@
 208 PACKAGE_VERSION = @PACKAGE_VERSION@
 209 PATH_SEPARATOR = @PATH_SEPARATOR@
 210 RANLIB = @RANLIB@
 211 SED = @SED@
 212 SET_MAKE = @SET_MAKE@
 213 SHELL = @SHELL@
 214 STRIP = @STRIP@
 215 VERSION = @VERSION@
 216 abs_builddir = @abs_builddir@
 217 abs_srcdir = @abs_srcdir@
 218 abs_top_builddir = @abs_top_builddir@
 219 abs_top_srcdir = @abs_top_srcdir@
 220 ac_ct_AR = @ac_ct_AR@
 221 ac_ct_CC = @ac_ct_CC@
 222 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 223 am__include = @am__include@
 224 am__leading_dot = @am__leading_dot@
 225 am__quote = @am__quote@
 226 am__tar = @am__tar@
 227 am__untar = @am__untar@
 228 bindir = @bindir@
 229 build = @build@
 230 build_alias = @build_alias@
 231 build_cpu = @build_cpu@
 232 build_os = @build_os@
 233 build_vendor = @build_vendor@
 234 builddir = @builddir@
 235 datadir = @datadir@
 236 datarootdir = @datarootdir@
 237 docdir = @docdir@
 238 dvidir = @dvidir@
 239 exec_prefix = @exec_prefix@
 240 host = @host@
 241 host_alias = @host_alias@
 242 host_cpu = @host_cpu@
 243 host_os = @host_os@
 244 host_vendor = @host_vendor@
 245 htmldir = @htmldir@
 246 includedir = @includedir@
 247 infodir = @infodir@
 248 install_sh = @install_sh@
 249 libdir = @libdir@
 250 libexecdir = @libexecdir@
 251 localedir = @localedir@
 252 localstatedir = @localstatedir@
 253 mandir = @mandir@
 254 mkdir_p = @mkdir_p@
 255 oldincludedir = @oldincludedir@
 256 pdfdir = @pdfdir@
 257 prefix = @prefix@
 258 program_transform_name = @program_transform_name@
 259 psdir = @psdir@
 260 sbindir = @sbindir@
 261 sharedstatedir = @sharedstatedir@
 262 srcdir = @srcdir@
 263 sysconfdir = @sysconfdir@
 264 target_alias = @target_alias@
 265 top_build_prefix = @top_build_prefix@
 266 top_builddir = @top_builddir@
 267 top_srcdir = @top_srcdir@
 268 NULL =
 269
 270 # Standard PAM API
 271 PMAN = \
 272         pam_acct_mgmt.3 \
 273         pam_authenticate.3 \
 274         pam_chauthtok.3 \
 275         pam_close_session.3 \
 276         pam_end.3 \
 277         pam_get_data.3 \
 278         pam_get_item.3 \
 279         pam_get_user.3 \
 280         pam_getenv.3 \
 281         pam_getenvlist.3 \
 282         pam_open_session.3 \
 283         pam_putenv.3 \
 284         pam_set_data.3 \
 285         pam_set_item.3 \
 286         pam_setcred.3 \
 287         pam_start.3 \
 288         pam_strerror.3 \
 289         $(NULL)
 290
 291
 292 # Standard module API
 293 MMAN = \
 294         pam_sm_acct_mgmt.3 \
 295         pam_sm_authenticate.3 \
 296         pam_sm_chauthtok.3 \
 297         pam_sm_close_session.3 \
 298         pam_sm_open_session.3 \
 299         pam_sm_setcred.3 \
 300         $(NULL)
 301
 302
 303 # OpenPAM extensions
 304 OMAN = \
 305         openpam_borrow_cred.3 \
 306         openpam_free_data.3 \
 307         openpam_free_envlist.3 \
 308         openpam_get_feature.3 \
 309         openpam_get_option.3 \
 310         openpam_log.3 \
 311         openpam_nullconv.3 \
 312         openpam_readline.3 \
 313         openpam_readlinev.3 \
 314         openpam_readword.3 \
 315         openpam_restore_cred.3 \
 316         openpam_set_feature.3 \
 317         openpam_set_option.3 \
 318         openpam_straddch.3 \
 319         openpam_subst.3 \
 320         openpam_ttyconv.3 \
 321         pam_error.3 \
 322         pam_get_authtok.3 \
 323         pam_info.3 \
 324         pam_prompt.3 \
 325         pam_setenv.3 \
 326         pam_verror.3 \
 327         pam_vinfo.3 \
 328         pam_vprompt.3 \
 329         $(NULL)
 330
 331 EXTRA_DIST = openpam.man pam.man
 332 ALLCMAN = $(PMAN) $(MMAN) $(OMAN)
 333 GENMAN = $(ALLCMAN) openpam.3 pam.3
 334 dist_man3_MANS = $(GENMAN) pam_conv.3
 335 dist_man5_MANS = pam.conf.5
 336 CLEANFILES = $(GENMAN)
 337 GENDOC = $(top_srcdir)/misc/gendoc.pl
 338 LIBSRCDIR = $(top_srcdir)/lib/libpam
 339 SUFFIXES = .3
 340 all: all-am
 341
 342 .SUFFIXES:
 343 .SUFFIXES: .3 .c
 344 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 345         @for dep in $?; do \
 346           case '$(am__configure_deps)' in \
 347             *$$dep*) \
 348               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 349                 && { if test -f $@; then exit 0; else break; fi; }; \
 350               exit 1;; \
 351           esac; \
 352         done; \
 353         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign doc/man/Makefile'; \
 354         $(am__cd) $(top_srcdir) && \
 355           $(AUTOMAKE) --foreign doc/man/Makefile
 356 .PRECIOUS: Makefile
 357 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 358         @case '$?' in \
 359           *config.status*) \
 360             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 361           *) \
 362             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 363             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 364         esac;
 365
 366 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 367         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 368
 369 $(top_srcdir)/configure:  $(am__configure_deps)
 370         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 371 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 372         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 373 $(am__aclocal_m4_deps):
 374
 375 mostlyclean-libtool:
 376         -rm -f *.lo
 377
 378 clean-libtool:
 379         -rm -rf .libs _libs
 380 install-man3: $(dist_man3_MANS)
 381         @$(NORMAL_INSTALL)
 382         @list1='$(dist_man3_MANS)'; \
 383         list2=''; \
 384         test -n "$(man3dir)" \
 385           && test -n "`echo $$list1$$list2`" \
 386           || exit 0; \
 387         echo " $(MKDIR_P) '$(DESTDIR)$(man3dir)'"; \
 388         $(MKDIR_P) "$(DESTDIR)$(man3dir)" || exit 1; \
 389         { for i in $$list1; do echo "$$i"; done;  \
 390         if test -n "$$list2"; then \
 391           for i in $$list2; do echo "$$i"; done \
 392             | sed -n '/\.3[a-z]*$$/p'; \
 393         fi; \
 394         } | while read p; do \
 395           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 396           echo "$$d$$p"; echo "$$p"; \
 397         done | \
 398         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 399               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 400         sed 'N;N;s,\n, ,g' | { \
 401         list=; while read file base inst; do \
 402           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 403             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man3dir)/$$inst'"; \
 404             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man3dir)/$$inst" || exit $$?; \
 405           fi; \
 406         done; \
 407         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 408         while read files; do \
 409           test -z "$$files" || { \
 410             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man3dir)'"; \
 411             $(INSTALL_DATA) $$files "$(DESTDIR)$(man3dir)" || exit $$?; }; \
 412         done; }
 413
 414 uninstall-man3:
 415         @$(NORMAL_UNINSTALL)
 416         @list='$(dist_man3_MANS)'; test -n "$(man3dir)" || exit 0; \
 417         files=`{ for i in $$list; do echo "$$i"; done; \
 418         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^3][0-9a-z]*$$,3,;x' \
 419               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 420         dir='$(DESTDIR)$(man3dir)'; $(am__uninstall_files_from_dir)
 421 install-man5: $(dist_man5_MANS)
 422         @$(NORMAL_INSTALL)
 423         @list1='$(dist_man5_MANS)'; \
 424         list2=''; \
 425         test -n "$(man5dir)" \
 426           && test -n "`echo $$list1$$list2`" \
 427           || exit 0; \
 428         echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
 429         $(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
 430         { for i in $$list1; do echo "$$i"; done;  \
 431         if test -n "$$list2"; then \
 432           for i in $$list2; do echo "$$i"; done \
 433             | sed -n '/\.5[a-z]*$$/p'; \
 434         fi; \
 435         } | while read p; do \
 436           if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
 437           echo "$$d$$p"; echo "$$p"; \
 438         done | \
 439         sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
 440               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
 441         sed 'N;N;s,\n, ,g' | { \
 442         list=; while read file base inst; do \
 443           if test "$$base" = "$$inst"; then list="$$list $$file"; else \
 444             echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
 445             $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
 446           fi; \
 447         done; \
 448         for i in $$list; do echo "$$i"; done | $(am__base_list) | \
 449         while read files; do \
 450           test -z "$$files" || { \
 451             echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
 452             $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
 453         done; }
 454
 455 uninstall-man5:
 456         @$(NORMAL_UNINSTALL)
 457         @list='$(dist_man5_MANS)'; test -n "$(man5dir)" || exit 0; \
 458         files=`{ for i in $$list; do echo "$$i"; done; \
 459         } | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
 460               -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
 461         dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
 462 tags TAGS:
 463
 464 ctags CTAGS:
 465
 466 cscope cscopelist:
 467
 468
 469 distdir: $(DISTFILES)
 470         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 471         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 472         list='$(DISTFILES)'; \
 473           dist_files=`for file in $$list; do echo $$file; done | \
 474           sed -e "s|^$$srcdirstrip/||;t" \
 475               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 476         case $$dist_files in \
 477           */*) $(MKDIR_P) `echo "$$dist_files" | \
 478                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 479                            sort -u` ;; \
 480         esac; \
 481         for file in $$dist_files; do \
 482           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 483           if test -d $$d/$$file; then \
 484             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 485             if test -d "$(distdir)/$$file"; then \
 486               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 487             fi; \
 488             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 489               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 490               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 491             fi; \
 492             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 493           else \
 494             test -f "$(distdir)/$$file" \
 495             || cp -p $$d/$$file "$(distdir)/$$file" \
 496             || exit 1; \
 497           fi; \
 498         done
 499 check-am: all-am
 500 check: check-am
 501 all-am: Makefile $(MANS)
 502 installdirs:
 503         for dir in "$(DESTDIR)$(man3dir)" "$(DESTDIR)$(man5dir)"; do \
 504           test -z "$$dir" || $(MKDIR_P) "$$dir"; \
 505         done
 506 install: install-am
 507 install-exec: install-exec-am
 508 install-data: install-data-am
 509 uninstall: uninstall-am
 510
 511 install-am: all-am
 512         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 513
 514 installcheck: installcheck-am
 515 install-strip:
 516         if test -z '$(STRIP)'; then \
 517           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 518             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 519               install; \
 520         else \
 521           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 522             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 523             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 524         fi
 525 mostlyclean-generic:
 526
 527 clean-generic:
 528         -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
 529
 530 distclean-generic:
 531         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 532         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 533
 534 maintainer-clean-generic:
 535         @echo "This command is intended for maintainers to use"
 536         @echo "it deletes files that may require special tools to rebuild."
 537 clean: clean-am
 538
 539 clean-am: clean-generic clean-libtool mostlyclean-am
 540
 541 distclean: distclean-am
 542         -rm -f Makefile
 543 distclean-am: clean-am distclean-generic
 544
 545 dvi: dvi-am
 546
 547 dvi-am:
 548
 549 html: html-am
 550
 551 html-am:
 552
 553 info: info-am
 554
 555 info-am:
 556
 557 install-data-am: install-man
 558
 559 install-dvi: install-dvi-am
 560
 561 install-dvi-am:
 562
 563 install-exec-am:
 564
 565 install-html: install-html-am
 566
 567 install-html-am:
 568
 569 install-info: install-info-am
 570
 571 install-info-am:
 572
 573 install-man: install-man3 install-man5
 574
 575 install-pdf: install-pdf-am
 576
 577 install-pdf-am:
 578
 579 install-ps: install-ps-am
 580
 581 install-ps-am:
 582
 583 installcheck-am:
 584
 585 maintainer-clean: maintainer-clean-am
 586         -rm -f Makefile
 587 maintainer-clean-am: distclean-am maintainer-clean-generic
 588
 589 mostlyclean: mostlyclean-am
 590
 591 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 592
 593 pdf: pdf-am
 594
 595 pdf-am:
 596
 597 ps: ps-am
 598
 599 ps-am:
 600
 601 uninstall-am: uninstall-man
 602
 603 uninstall-man: uninstall-man3 uninstall-man5
 604
 605 .MAKE: install-am install-strip
 606
 607 .PHONY: all all-am check check-am clean clean-generic clean-libtool \
 608         cscopelist-am ctags-am distclean distclean-generic \
 609         distclean-libtool distdir dvi dvi-am html html-am info info-am \
 610         install install-am install-data install-data-am install-dvi \
 611         install-dvi-am install-exec install-exec-am install-html \
 612         install-html-am install-info install-info-am install-man \
 613         install-man3 install-man5 install-pdf install-pdf-am \
 614         install-ps install-ps-am install-strip installcheck \
 615         installcheck-am installdirs maintainer-clean \
 616         maintainer-clean-generic mostlyclean mostlyclean-generic \
 617         mostlyclean-libtool pdf pdf-am ps ps-am tags-am uninstall \
 618         uninstall-am uninstall-man uninstall-man3 uninstall-man5
 619
 620
 621 .c.3: $(GENDOC)
 622         perl -w $(GENDOC) $< || rm $@
 623
 624 openpam.3: $(OPENPAM_MAN) $(GENDOC) $(srcdir)/openpam.man
 625         perl -w $(GENDOC) -o $(OPENPAM_MAN) <$(srcdir)/openpam.man || rm $@
 626
 627 pam.3: $(PAM_MAN) $(GENDOC) $(srcdir)/pam.man
 628         perl -w $(GENDOC) -p $(PAM_MAN) <$(srcdir)/pam.man || rm $@
 629
 630 $(GENMAN): $(GENDOC)
 631
 632 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 633 # Otherwise a system limit (for SysV at least) may be exceeded.
 634 .NOEXPORT: