release/release.sh

   1 #!/bin/sh
   2 #-
   3 # Copyright (c) 2013-2017 The FreeBSD Foundation
   4 # Copyright (c) 2013 Glen Barber
   5 # Copyright (c) 2011 Nathan Whitehorn
   6 # All rights reserved.
   7 #
   8 # Portions of this software were developed by Glen Barber
   9 # under sponsorship from the FreeBSD Foundation.
  10 #
  11 # Redistribution and use in source and binary forms, with or without
  12 # modification, are permitted provided that the following conditions
  13 # are met:
  14 # 1. Redistributions of source code must retain the above copyright
  15 #    notice, this list of conditions and the following disclaimer.
  16 # 2. Redistributions in binary form must reproduce the above copyright
  17 #    notice, this list of conditions and the following disclaimer in the
  18 #    documentation and/or other materials provided with the distribution.
  19 #
  20 # THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  21 # ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  22 # IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  23 # ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  24 # FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  25 # DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  26 # OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  27 # HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  28 # LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  29 # OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  30 # SUCH DAMAGE.
  31 #
  32 # release.sh: check out source trees, and build release components with
  33 #  totally clean, fresh trees.
  34 # Based on release/generate-release.sh written by Nathan Whitehorn
  35 #
  36 # $FreeBSD$
  37 #
  38
  39 export PATH="/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin"
  40
  41 VERSION=2
  42
  43 # Prototypes that can be redefined per-chroot or per-target.
  44 load_chroot_env() { }
  45 load_target_env() { }
  46 buildenv_setup() { }
  47
  48 usage() {
  49         echo "Usage: $0 [-c release.conf]"
  50         exit 1
  51 }
  52
  53 # env_setup(): Set up the default build environment variables, such as the
  54 # CHROOTDIR, VCSCMD, SVNROOT, etc.  This is called before the release.conf
  55 # file is sourced, if '-c <release.conf>' is specified.
  56 env_setup() {
  57         # The directory within which the release will be built.
  58         CHROOTDIR="/scratch"
  59         RELENGDIR="$(dirname $(realpath ${0}))"
  60
  61         # The default version control system command to obtain the sources.
  62         for _dir in /usr/bin /usr/local/bin; do
  63                 for _svn in svn svnlite; do
  64                         [ -x "${_dir}/${_svn}" ] && VCSCMD="${_dir}/${_svn}"
  65                         [ ! -z "${VCSCMD}" ] && break 2
  66                 done
  67         done
  68         VCSCMD="${VCSCMD} checkout"
  69
  70         # The default svn checkout server, and svn branches for src/, doc/,
  71         # and ports/.
  72         SVNROOT="svn://svn.FreeBSD.org/"
  73         SRCBRANCH="base/head@rHEAD"
  74         DOCBRANCH="doc/head@rHEAD"
  75         PORTBRANCH="ports/head@rHEAD"
  76
  77         # Set for embedded device builds.
  78         EMBEDDEDBUILD=
  79
  80         # Sometimes one needs to checkout src with --force svn option.
  81         # If custom kernel configs copied to src tree before checkout, e.g.
  82         SRC_FORCE_CHECKOUT=
  83
  84         # The default make.conf and src.conf to use.  Set to /dev/null
  85         # by default to avoid polluting the chroot(8) environment with
  86         # non-default settings.
  87         MAKE_CONF="/dev/null"
  88         SRC_CONF="/dev/null"
  89
  90         # The number of make(1) jobs, defaults to the number of CPUs available
  91         # for buildworld, and half of number of CPUs available for buildkernel.
  92         WORLD_FLAGS="-j$(sysctl -n hw.ncpu)"
  93         KERNEL_FLAGS="-j$(( $(( $(sysctl -n hw.ncpu) + 1 )) / 2))"
  94
  95         MAKE_FLAGS="-s"
  96
  97         # The name of the kernel to build, defaults to GENERIC.
  98         KERNEL="GENERIC"
  99
 100         # Set to non-empty value to disable checkout of doc/ and/or ports/.
 101         # Disabling ports/ checkout also forces NODOC to be set.
 102         NODOC=
 103         NOPORTS=
 104
 105         # Set to non-empty value to build dvd1.iso as part of the release.
 106         WITH_DVD=
 107         WITH_COMPRESSED_IMAGES=
 108
 109         # Set to non-empty value to build virtual machine images as part of
 110         # the release.
 111         WITH_VMIMAGES=
 112         WITH_COMPRESSED_VMIMAGES=
 113         XZ_THREADS=0
 114
 115         # Set to non-empty value to build virtual machine images for various
 116         # cloud providers as part of the release.
 117         WITH_CLOUDWARE=
 118
 119         return 0
 120 } # env_setup()
 121
 122 # env_check(): Perform sanity tests on the build environment, such as ensuring
 123 # files/directories exist, as well as adding backwards-compatibility hacks if
 124 # necessary.  This is called unconditionally, and overrides the defaults set
 125 # in env_setup() if '-c <release.conf>' is specified.
 126 env_check() {
 127         chroot_build_release_cmd="chroot_build_release"
 128         # Fix for backwards-compatibility with release.conf that does not have
 129         # the trailing '/'.
 130         case ${SVNROOT} in
 131                 *svn*)
 132                         SVNROOT="${SVNROOT}/"
 133                         ;;
 134                 *)
 135                         ;;
 136         esac
 137
 138         # Prefix the branches with the SVNROOT for the full checkout URL.
 139         SRCBRANCH="${SVNROOT}${SRCBRANCH}"
 140         DOCBRANCH="${SVNROOT}${DOCBRANCH}"
 141         PORTBRANCH="${SVNROOT}${PORTBRANCH}"
 142
 143         if [ -n "${EMBEDDEDBUILD}" ]; then
 144                 WITH_DVD=
 145                 WITH_COMPRESSED_IMAGES=
 146                 NODOC=yes
 147                 case ${EMBEDDED_TARGET}:${EMBEDDED_TARGET_ARCH} in
 148                         arm:arm*|arm64:aarch64)
 149                                 chroot_build_release_cmd="chroot_arm_build_release"
 150                                 ;;
 151                         *)
 152                                 ;;
 153                 esac
 154         fi
 155
 156         # If PORTS is set and NODOC is unset, force NODOC=yes because the ports
 157         # tree is required to build the documentation set.
 158         if [ -n "${NOPORTS}" ] && [ -z "${NODOC}" ]; then
 159                 echo "*** NOTICE: Setting NODOC=1 since ports tree is required"
 160                 echo "            and NOPORTS is set."
 161                 NODOC=yes
 162         fi
 163
 164         # If NOPORTS and/or NODOC are unset, they must not pass to make as
 165         # variables.  The release makefile verifies definedness of the
 166         # NOPORTS/NODOC variables instead of their values.
 167         DOCPORTS=
 168         if [ -n "${NOPORTS}" ]; then
 169                 DOCPORTS="NOPORTS=yes "
 170         fi
 171         if [ -n "${NODOC}" ]; then
 172                 DOCPORTS="${DOCPORTS}NODOC=yes"
 173         fi
 174
 175         # The aggregated build-time flags based upon variables defined within
 176         # this file, unless overridden by release.conf.  In most cases, these
 177         # will not need to be changed.
 178         CONF_FILES="__MAKE_CONF=${MAKE_CONF} SRCCONF=${SRC_CONF}"
 179         if [ -n "${TARGET}" ] && [ -n "${TARGET_ARCH}" ]; then
 180                 ARCH_FLAGS="TARGET=${TARGET} TARGET_ARCH=${TARGET_ARCH}"
 181         else
 182                 ARCH_FLAGS=
 183         fi
 184         # Force src checkout if configured
 185         FORCE_SRC_KEY=
 186         if [ -n "${SRC_FORCE_CHECKOUT}" ]; then
 187                 FORCE_SRC_KEY="--force"
 188         fi
 189
 190         if [ -z "${CHROOTDIR}" ]; then
 191                 echo "Please set CHROOTDIR."
 192                 exit 1
 193         fi
 194
 195         if [ $(id -u) -ne 0 ]; then
 196                 echo "Needs to be run as root."
 197                 exit 1
 198         fi
 199
 200         CHROOT_MAKEENV="${CHROOT_MAKEENV} \
 201                 MAKEOBJDIRPREFIX=${CHROOTDIR}/tmp/obj"
 202         CHROOT_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${CONF_FILES}"
 203         CHROOT_IMAKEFLAGS="${CONF_FILES}"
 204         CHROOT_DMAKEFLAGS="${CONF_FILES}"
 205         RELEASE_WMAKEFLAGS="${MAKE_FLAGS} ${WORLD_FLAGS} ${ARCH_FLAGS} \
 206                 ${CONF_FILES}"
 207         RELEASE_KMAKEFLAGS="${MAKE_FLAGS} ${KERNEL_FLAGS} \
 208                 KERNCONF=\"${KERNEL}\" ${ARCH_FLAGS} ${CONF_FILES}"
 209         RELEASE_RMAKEFLAGS="${ARCH_FLAGS} \
 210                 KERNCONF=\"${KERNEL}\" ${CONF_FILES} ${DOCPORTS} \
 211                 WITH_DVD=${WITH_DVD} WITH_VMIMAGES=${WITH_VMIMAGES} \
 212                 WITH_CLOUDWARE=${WITH_CLOUDWARE} XZ_THREADS=${XZ_THREADS}"
 213
 214         return 0
 215 } # env_check()
 216
 217 # chroot_setup(): Prepare the build chroot environment for the release build.
 218 chroot_setup() {
 219         load_chroot_env
 220         mkdir -p ${CHROOTDIR}/usr
 221
 222         if [ -z "${SRC_UPDATE_SKIP}" ]; then
 223                 ${VCSCMD} ${FORCE_SRC_KEY} ${SRCBRANCH} ${CHROOTDIR}/usr/src
 224         fi
 225         if [ -z "${NODOC}" ] && [ -z "${DOC_UPDATE_SKIP}" ]; then
 226                 ${VCSCMD} ${DOCBRANCH} ${CHROOTDIR}/usr/doc
 227         fi
 228         if [ -z "${NOPORTS}" ] && [ -z "${PORTS_UPDATE_SKIP}" ]; then
 229                 ${VCSCMD} ${PORTBRANCH} ${CHROOTDIR}/usr/ports
 230         fi
 231
 232         if [ -z "${CHROOTBUILD_SKIP}" ]; then
 233                 cd ${CHROOTDIR}/usr/src
 234                 env ${CHROOT_MAKEENV} make ${CHROOT_WMAKEFLAGS} buildworld
 235                 env ${CHROOT_MAKEENV} make ${CHROOT_IMAKEFLAGS} installworld \
 236                         DESTDIR=${CHROOTDIR}
 237                 env ${CHROOT_MAKEENV} make ${CHROOT_DMAKEFLAGS} distribution \
 238                         DESTDIR=${CHROOTDIR}
 239         fi
 240
 241         return 0
 242 } # chroot_setup()
 243
 244 # extra_chroot_setup(): Prepare anything additional within the build
 245 # necessary for the release build.
 246 extra_chroot_setup() {
 247         mkdir -p ${CHROOTDIR}/dev
 248         mount -t devfs devfs ${CHROOTDIR}/dev
 249         [ -e /etc/resolv.conf -a ! -e ${CHROOTDIR}/etc/resolv.conf ] && \
 250                 cp /etc/resolv.conf ${CHROOTDIR}/etc/resolv.conf
 251         # Run ldconfig(8) in the chroot directory so /var/run/ld-elf*.so.hints
 252         # is created.  This is needed by ports-mgmt/pkg.
 253         eval chroot ${CHROOTDIR} /etc/rc.d/ldconfig forcerestart
 254
 255         # If MAKE_CONF and/or SRC_CONF are set and not character devices
 256         # (/dev/null), copy them to the chroot.
 257         if [ -e ${MAKE_CONF} ] && [ ! -c ${MAKE_CONF} ]; then
 258                 mkdir -p ${CHROOTDIR}/$(dirname ${MAKE_CONF})
 259                 cp ${MAKE_CONF} ${CHROOTDIR}/${MAKE_CONF}
 260         fi
 261         if [ -e ${SRC_CONF} ] && [ ! -c ${SRC_CONF} ]; then
 262                 mkdir -p ${CHROOTDIR}/$(dirname ${SRC_CONF})
 263                 cp ${SRC_CONF} ${CHROOTDIR}/${SRC_CONF}
 264         fi
 265
 266         if [ -d ${CHROOTDIR}/usr/ports ]; then
 267                 # Trick the ports 'run-autotools-fixup' target to do the right
 268                 # thing.
 269                 _OSVERSION=$(chroot ${CHROOTDIR} /usr/bin/uname -U)
 270                 REVISION=$(chroot ${CHROOTDIR} make -C /usr/src/release -V REVISION)
 271                 BRANCH=$(chroot ${CHROOTDIR} make -C /usr/src/release -V BRANCH)
 272                 UNAME_r=${REVISION}-${BRANCH}
 273                 if [ -d ${CHROOTDIR}/usr/doc ] && [ -z "${NODOC}" ]; then
 274                         PBUILD_FLAGS="OSVERSION=${_OSVERSION} BATCH=yes"
 275                         PBUILD_FLAGS="${PBUILD_FLAGS} UNAME_r=${UNAME_r}"
 276                         PBUILD_FLAGS="${PBUILD_FLAGS} OSREL=${REVISION}"
 277                         PBUILD_FLAGS="${PBUILD_FLAGS} WRKDIRPREFIX=/tmp/ports"
 278                         PBUILD_FLAGS="${PBUILD_FLAGS} DISTDIR=/tmp/distfiles"
 279                         chroot ${CHROOTDIR} env ${PBUILD_FLAGS} make -C \
 280                                 /usr/ports/textproc/docproj \
 281                                 OPTIONS_UNSET="FOP IGOR" \
 282                                 FORCE_PKG_REGISTER=1 \
 283                                 install clean distclean
 284                 fi
 285         fi
 286
 287         if [ ! -z "${EMBEDDEDPORTS}" ]; then
 288                 _OSVERSION=$(chroot ${CHROOTDIR} /usr/bin/uname -U)
 289                 REVISION=$(chroot ${CHROOTDIR} make -C /usr/src/release -V REVISION)
 290                 BRANCH=$(chroot ${CHROOTDIR} make -C /usr/src/release -V BRANCH)
 291                 PBUILD_FLAGS="OSVERSION=${_OSVERSION} BATCH=yes"
 292                 PBUILD_FLAGS="${PBUILD_FLAGS} UNAME_r=${UNAME_r}"
 293                 PBUILD_FLAGS="${PBUILD_FLAGS} OSREL=${REVISION}"
 294                 PBUILD_FLAGS="${PBUILD_FLAGS} WRKDIRPREFIX=/tmp/ports"
 295                 PBUILD_FLAGS="${PBUILD_FLAGS} DISTDIR=/tmp/distfiles"
 296                 for _PORT in ${EMBEDDEDPORTS}; do
 297                         eval chroot ${CHROOTDIR} env ${PBUILD_FLAGS} make -C \
 298                                 /usr/ports/${_PORT} \
 299                                 FORCE_PKG_REGISTER=1 install clean distclean
 300                 done
 301         fi
 302
 303         buildenv_setup
 304
 305         return 0
 306 } # extra_chroot_setup()
 307
 308 # chroot_build_target(): Build the userland and kernel for the build target.
 309 chroot_build_target() {
 310         load_target_env
 311         if [ ! -z "${EMBEDDEDBUILD}" ]; then
 312                 RELEASE_WMAKEFLAGS="${RELEASE_WMAKEFLAGS} \
 313                         TARGET=${EMBEDDED_TARGET} \
 314                         TARGET_ARCH=${EMBEDDED_TARGET_ARCH}"
 315                 RELEASE_KMAKEFLAGS="${RELEASE_KMAKEFLAGS} \
 316                         TARGET=${EMBEDDED_TARGET} \
 317                         TARGET_ARCH=${EMBEDDED_TARGET_ARCH}"
 318         fi
 319         eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_WMAKEFLAGS} buildworld
 320         eval chroot ${CHROOTDIR} make -C /usr/src ${RELEASE_KMAKEFLAGS} buildkernel
 321
 322         return 0
 323 } # chroot_build_target
 324
 325 # chroot_build_release(): Invoke the 'make release' target.
 326 chroot_build_release() {
 327         load_target_env
 328         if [ ! -z "${WITH_VMIMAGES}" ]; then
 329                 if [ -z "${VMFORMATS}" ]; then
 330                         VMFORMATS="$(eval chroot ${CHROOTDIR} \
 331                                 make -C /usr/src/release -V VMFORMATS)"
 332                 fi
 333                 if [ -z "${VMSIZE}" ]; then
 334                         VMSIZE="$(eval chroot ${CHROOTDIR} \
 335                                 make -C /usr/src/release -V VMSIZE)"
 336                 fi
 337                 RELEASE_RMAKEFLAGS="${RELEASE_RMAKEFLAGS} \
 338                         VMFORMATS=\"${VMFORMATS}\" VMSIZE=${VMSIZE}"
 339         fi
 340         eval chroot ${CHROOTDIR} make -C /usr/src/release \
 341                 ${RELEASE_RMAKEFLAGS} release
 342         eval chroot ${CHROOTDIR} make -C /usr/src/release \
 343                 ${RELEASE_RMAKEFLAGS} install DESTDIR=/R \
 344                 WITH_COMPRESSED_IMAGES=${WITH_COMPRESSED_IMAGES} \
 345                 WITH_COMPRESSED_VMIMAGES=${WITH_COMPRESSED_VMIMAGES}
 346
 347         return 0
 348 } # chroot_build_release()
 349
 350 # chroot_arm_build_release(): Create arm SD card image.
 351 chroot_arm_build_release() {
 352         load_target_env
 353         eval chroot ${CHROOTDIR} make -C /usr/src/release obj
 354         case ${EMBEDDED_TARGET} in
 355                 arm|arm64)
 356                         if [ -e "${RELENGDIR}/tools/arm.subr" ]; then
 357                                 . "${RELENGDIR}/tools/arm.subr"
 358                         fi
 359                         ;;
 360                 *)
 361                         ;;
 362         esac
 363         [ ! -z "${RELEASECONF}" ] && . "${RELEASECONF}"
 364         WORLDDIR="$(eval chroot ${CHROOTDIR} make -C /usr/src/release -V WORLDDIR)"
 365         OBJDIR="$(eval chroot ${CHROOTDIR} make -C /usr/src/release -V .OBJDIR)"
 366         DESTDIR="${OBJDIR}/${KERNEL}"
 367         IMGBASE="${CHROOTDIR}/${OBJDIR}/${KERNEL}.img"
 368         OSRELEASE="$(eval chroot ${CHROOTDIR} make -C /usr/src/release \
 369                 TARGET=${EMBEDDED_TARGET} TARGET_ARCH=${EMBEDDED_TARGET_ARCH} \
 370                 -V OSRELEASE)"
 371         chroot ${CHROOTDIR} mkdir -p ${DESTDIR}
 372         chroot ${CHROOTDIR} truncate -s ${IMAGE_SIZE} ${IMGBASE##${CHROOTDIR}}
 373         export mddev=$(chroot ${CHROOTDIR} \
 374                 mdconfig -f ${IMGBASE##${CHROOTDIR}} ${MD_ARGS})
 375         arm_create_disk
 376         arm_install_base
 377         arm_install_uboot
 378         mdconfig -d -u ${mddev}
 379         chroot ${CHROOTDIR} rmdir ${DESTDIR}
 380         mv ${IMGBASE} ${CHROOTDIR}/${OBJDIR}/${OSRELEASE}-${KERNEL}.img
 381         chroot ${CHROOTDIR} mkdir -p /R
 382         chroot ${CHROOTDIR} cp -p ${OBJDIR}/${OSRELEASE}-${KERNEL}.img \
 383                 /R/${OSRELEASE}-${KERNEL}.img
 384         chroot ${CHROOTDIR} xz -T ${XZ_THREADS} /R/${OSRELEASE}-${KERNEL}.img
 385         cd ${CHROOTDIR}/R && sha512 ${OSRELEASE}* \
 386                 > CHECKSUM.SHA512
 387         cd ${CHROOTDIR}/R && sha256 ${OSRELEASE}* \
 388                 > CHECKSUM.SHA256
 389
 390         return 0
 391 } # chroot_arm_build_release()
 392
 393 # main(): Start here.
 394 main() {
 395         set -e # Everything must succeed
 396         env_setup
 397         while getopts c: opt; do
 398                 case ${opt} in
 399                         c)
 400                                 RELEASECONF="$(realpath ${OPTARG})"
 401                                 ;;
 402                         \?)
 403                                 usage
 404                                 ;;
 405                 esac
 406         done
 407         shift $(($OPTIND - 1))
 408         if [ ! -z "${RELEASECONF}" ]; then
 409                 if [ -e "${RELEASECONF}" ]; then
 410                         . ${RELEASECONF}
 411                 else
 412                         echo "Nonexistent configuration file: ${RELEASECONF}"
 413                         echo "Using default build environment."
 414                 fi
 415         fi
 416         env_check
 417         trap "umount ${CHROOTDIR}/dev" EXIT # Clean up devfs mount on exit
 418         chroot_setup
 419         extra_chroot_setup
 420         chroot_build_target
 421         ${chroot_build_release_cmd}
 422
 423         return 0
 424 } # main()
 425
 426 main "${@}"