MFC 305695,305696,305699,305702,305703,305713,305715,305827,305852,305906,

[FreeBSD/stable/10.git] / sys / dev / cxgbe / firmware / t6fw_cfg.txt

# Chelsio T6 Factory Default configuration file.
#
# Copyright (C) 2014-2016 Chelsio Communications.  All rights reserved.
#
#   DO NOT MODIFY THIS FILE UNDER ANY CIRCUMSTANCES.  MODIFICATION OF THIS FILE
#   WILL RESULT IN A NON-FUNCTIONAL ADAPTER AND MAY RESULT IN PHYSICAL DAMAGE
#   TO ADAPTERS.


# This file provides the default, power-on configuration for 2-port T6-based
# adapters shipped from the factory.  These defaults are designed to address
# the needs of the vast majority of Terminator customers.  The basic idea is to
# have a default configuration which allows a customer to plug a Terminator
# adapter in and have it work regardless of OS, driver or application except in
# the most unusual and/or demanding customer applications.
#
# Many of the Terminator resources which are described by this configuration
# are finite.  This requires balancing the configuration/operation needs of
# device drivers across OSes and a large number of customer application.
#
# Some of the more important resources to allocate and their constaints are:
#  1. Virtual Interfaces: 256.
#  2. Ingress Queues with Free Lists: 1024.
#  3. Egress Queues: 128K.
#  4. MSI-X Vectors: 1088.
#  5. Multi-Port Support (MPS) TCAM: 336 entries to support MAC destination
#     address matching on Ingress Packets.
#
# Some of the important OS/Driver resource needs are:
#  6. Some OS Drivers will manage all resources through a single Physical
#     Function (currently PF4 but it could be any Physical Function).
#  7. Some OS Drivers will manage different ports and functions (NIC,
#     storage, etc.) on different Physical Functions.  For example, NIC
#     functions for ports 0-1 on PF0-1, FCoE on PF4, iSCSI on PF5, etc.
#
# Some of the customer application needs which need to be accommodated:
#  8. Some customers will want to support large CPU count systems with
#     good scaling.  Thus, we'll need to accommodate a number of
#     Ingress Queues and MSI-X Vectors to allow up to some number of CPUs
#     to be involved per port and per application function.  For example,
#     in the case where all ports and application functions will be
#     managed via a single Unified PF and we want to accommodate scaling up
#     to 8 CPUs, we would want:
#
#         2 ports *
#         3 application functions (NIC, FCoE, iSCSI) per port *
#         16 Ingress Queue/MSI-X Vectors per application function
#
#     for a total of 96 Ingress Queues and MSI-X Vectors on the Unified PF.
#     (Plus a few for Firmware Event Queues, etc.)
#
#  9. Some customers will want to use PCI-E SR-IOV Capability to allow Virtual
#     Machines to directly access T6 functionality via SR-IOV Virtual Functions
#     and "PCI Device Passthrough" -- this is especially true for the NIC
#     application functionality.
#


# Global configuration settings.
#
[global]
        rss_glb_config_mode = basicvirtual
        rss_glb_config_options = tnlmapen,hashtoeplitz,tnlalllkp

        # PL_TIMEOUT register
        pl_timeout_value = 200          # the timeout value in units of us

        # The following Scatter Gather Engine (SGE) settings assume a 4KB Host
        # Page Size and a 64B L1 Cache Line Size. It programs the
        # EgrStatusPageSize and IngPadBoundary to 64B and the PktShift to 2.
        # If a Master PF Driver finds itself on a machine with different
        # parameters, then the Master PF Driver is responsible for initializing
        # these parameters to appropriate values.
        #
        # Notes:
        #  1. The Free List Buffer Sizes below are raw and the firmware will
        #     round them up to the Ingress Padding Boundary.
        #  2. The SGE Timer Values below are expressed below in microseconds.
        #     The firmware will convert these values to Core Clock Ticks when
        #     it processes the configuration parameters.
        #
        reg[0x1008] = 0x40810/0x21c70   # SGE_CONTROL
        reg[0x100c] = 0x22222222        # SGE_HOST_PAGE_SIZE
        reg[0x10a0] = 0x01040810        # SGE_INGRESS_RX_THRESHOLD
        reg[0x1044] = 4096              # SGE_FL_BUFFER_SIZE0
        reg[0x1048] = 65536             # SGE_FL_BUFFER_SIZE1
        reg[0x104c] = 1536              # SGE_FL_BUFFER_SIZE2
        reg[0x1050] = 9024              # SGE_FL_BUFFER_SIZE3
        reg[0x1054] = 9216              # SGE_FL_BUFFER_SIZE4
        reg[0x1058] = 2048              # SGE_FL_BUFFER_SIZE5
        reg[0x105c] = 128               # SGE_FL_BUFFER_SIZE6
        reg[0x1060] = 8192              # SGE_FL_BUFFER_SIZE7
        reg[0x1064] = 16384             # SGE_FL_BUFFER_SIZE8
        reg[0x10a4] = 0xa000a000/0xf000f000 # SGE_DBFIFO_STATUS
        reg[0x10a8] = 0x402000/0x402000 # SGE_DOORBELL_CONTROL
        sge_timer_value = 5, 10, 20, 50, 100, 200 # SGE_TIMER_VALUE* in usecs
        reg[0x10c4] = 0x20000000/0x20000000 # GK_CONTROL, enable 5th thread

        # enable TP_OUT_CONFIG.IPIDSPLITMODE
        reg[0x7d04] = 0x00010000/0x00010000

        reg[0x7dc0] = 0x0e2f8849        # TP_SHIFT_CNT

        #Tick granularities in kbps
        tsch_ticks = 100000, 10000, 1000, 10

        # TP_VLAN_PRI_MAP to select filter tuples and enable ServerSram
        # filter control: compact, fcoemask
        # server sram   : srvrsram
        # filter tuples : fragmentation, mpshittype, macmatch, ethertype,
        #                 protocol, tos, vlan, vnic_id, port, fcoe
        # valid filterModes are described the Terminator 5 Data Book
        filterMode = fcoemask, srvrsram, fragmentation, mpshittype, protocol, vlan, port, fcoe

        # filter tuples enforced in LE active region (equal to or subset of filterMode)
        filterMask = protocol, fcoe

        # Percentage of dynamic memory (in either the EDRAM or external MEM)
        # to use for TP RX payload
        tp_pmrx = 30

        # TP RX payload page size
        tp_pmrx_pagesize = 64K

        # TP number of RX channels
        tp_nrxch = 0            # 0 (auto) = 1

        # Percentage of dynamic memory (in either the EDRAM or external MEM)
        # to use for TP TX payload
        tp_pmtx = 50

        # TP TX payload page size
        tp_pmtx_pagesize = 64K

        # TP number of TX channels
        tp_ntxch = 0            # 0 (auto) = equal number of ports

        # TP OFLD MTUs
        tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600

        # enable TP_OUT_CONFIG.IPIDSPLITMODE and CRXPKTENC
        reg[0x7d04] = 0x00010008/0x00010008

        # TP_GLOBAL_CONFIG
        reg[0x7d08] = 0x00000800/0x00000800 # set IssFromCplEnable

        # TP_PC_CONFIG
        reg[0x7d48] = 0x00000000/0x00000400 # clear EnableFLMError

        # TP_PARA_REG0
        reg[0x7d60] = 0x06000000/0x07000000 # set InitCWND to 6

        # LE_DB_CONFIG
        reg[0x19c04] = 0x00000000/0x00440000 # LE Server SRAM disabled
                                             # LE IPv4 compression disabled 
        # LE_DB_HASH_CONFIG
        reg[0x19c28] = 0x00800000/0x01f00000 # LE Hash bucket size 8, 

        # ULP_TX_CONFIG
        reg[0x8dc0] = 0x00000104/0x00000104 # Enable ITT on PI err
                                            # Enable more error msg for ...
                                            # TPT error.

        # ULP_RX_MISC_FEATURE_ENABLE
        #reg[0x1925c] = 0x01003400/0x01003400 # iscsi tag pi bit
                                             # Enable offset decrement after ...
                                             # PI extraction and before DDP
                                             # ulp insert pi source info in DIF
                                             # iscsi_eff_offset_en

        #Enable iscsi completion moderation feature
        reg[0x1925c] = 0x000041c0/0x000031c0    # Enable offset decrement after
                                                # PI extraction and before DDP.
                                                # ulp insert pi source info in
                                                # DIF.
                                                # Enable iscsi hdr cmd mode.
                                                # iscsi force cmd mode.
                                                # Enable iscsi cmp mode.
        # MC configuration
        #mc_mode_brc[0] = 1             # mc0 - 1: enable BRC, 0: enable RBC

# Some "definitions" to make the rest of this a bit more readable.  We support
# 4 ports, 3 functions (NIC, FCoE and iSCSI), scaling up to 8 "CPU Queue Sets"
# per function per port ...
#
# NMSIX = 1088                  # available MSI-X Vectors
# NVI = 256                     # available Virtual Interfaces
# NMPSTCAM = 336                # MPS TCAM entries
#
# NPORTS = 2                    # ports
# NCPUS = 16                    # CPUs we want to support scalably
# NFUNCS = 3                    # functions per port (NIC, FCoE, iSCSI)

# Breakdown of Virtual Interface/Queue/Interrupt resources for the "Unified
# PF" which many OS Drivers will use to manage most or all functions.
#
# Each Ingress Queue can use one MSI-X interrupt but some Ingress Queues can
# use Forwarded Interrupt Ingress Queues.  For these latter, an Ingress Queue
# would be created and the Queue ID of a Forwarded Interrupt Ingress Queue
# will be specified as the "Ingress Queue Asynchronous Destination Index."
# Thus, the number of MSI-X Vectors assigned to the Unified PF will be less
# than or equal to the number of Ingress Queues ...
#
# NVI_NIC = 4                   # NIC access to NPORTS
# NFLIQ_NIC = 32                # NIC Ingress Queues with Free Lists
# NETHCTRL_NIC = 32             # NIC Ethernet Control/TX Queues
# NEQ_NIC = 64                  # NIC Egress Queues (FL, ETHCTRL/TX)
# NMPSTCAM_NIC = 16             # NIC MPS TCAM Entries (NPORTS*4)
# NMSIX_NIC = 32                # NIC MSI-X Interrupt Vectors (FLIQ)
#
# NVI_OFLD = 0                  # Offload uses NIC function to access ports
# NFLIQ_OFLD = 16               # Offload Ingress Queues with Free Lists
# NETHCTRL_OFLD = 0             # Offload Ethernet Control/TX Queues
# NEQ_OFLD = 16                 # Offload Egress Queues (FL)
# NMPSTCAM_OFLD = 0             # Offload MPS TCAM Entries (uses NIC's)
# NMSIX_OFLD = 16               # Offload MSI-X Interrupt Vectors (FLIQ)
#
# NVI_RDMA = 0                  # RDMA uses NIC function to access ports
# NFLIQ_RDMA = 4                # RDMA Ingress Queues with Free Lists
# NETHCTRL_RDMA = 0             # RDMA Ethernet Control/TX Queues
# NEQ_RDMA = 4                  # RDMA Egress Queues (FL)
# NMPSTCAM_RDMA = 0             # RDMA MPS TCAM Entries (uses NIC's)
# NMSIX_RDMA = 4                # RDMA MSI-X Interrupt Vectors (FLIQ)
#
# NEQ_WD = 128                  # Wire Direct TX Queues and FLs
# NETHCTRL_WD = 64              # Wire Direct TX Queues
# NFLIQ_WD = 64 `               # Wire Direct Ingress Queues with Free Lists
#
# NVI_ISCSI = 4                 # ISCSI access to NPORTS
# NFLIQ_ISCSI = 4               # ISCSI Ingress Queues with Free Lists
# NETHCTRL_ISCSI = 0            # ISCSI Ethernet Control/TX Queues
# NEQ_ISCSI = 4                 # ISCSI Egress Queues (FL)
# NMPSTCAM_ISCSI = 4            # ISCSI MPS TCAM Entries (NPORTS)
# NMSIX_ISCSI = 4               # ISCSI MSI-X Interrupt Vectors (FLIQ)
#
# NVI_FCOE = 4                  # FCOE access to NPORTS
# NFLIQ_FCOE = 34               # FCOE Ingress Queues with Free Lists
# NETHCTRL_FCOE = 32            # FCOE Ethernet Control/TX Queues
# NEQ_FCOE = 66                 # FCOE Egress Queues (FL)
# NMPSTCAM_FCOE = 32            # FCOE MPS TCAM Entries (NPORTS)
# NMSIX_FCOE = 34               # FCOE MSI-X Interrupt Vectors (FLIQ)

# Two extra Ingress Queues per function for Firmware Events and Forwarded
# Interrupts, and two extra interrupts per function for Firmware Events (or a
# Forwarded Interrupt Queue) and General Interrupts per function.
#
# NFLIQ_EXTRA = 6               # "extra" Ingress Queues 2*NFUNCS (Firmware and
#                               #   Forwarded Interrupts
# NMSIX_EXTRA = 6               # extra interrupts 2*NFUNCS (Firmware and
#                               #   General Interrupts

# Microsoft HyperV resources.  The HyperV Virtual Ingress Queues will have
# their interrupts forwarded to another set of Forwarded Interrupt Queues.
#
# NVI_HYPERV = 16               # VMs we want to support
# NVIIQ_HYPERV = 2              # Virtual Ingress Queues with Free Lists per VM
# NFLIQ_HYPERV = 40             # VIQs + NCPUS Forwarded Interrupt Queues
# NEQ_HYPERV = 32               # VIQs Free Lists
# NMPSTCAM_HYPERV = 16          # MPS TCAM Entries (NVI_HYPERV)
# NMSIX_HYPERV = 8              # NCPUS Forwarded Interrupt Queues

# Adding all of the above Unified PF resource needs together: (NIC + OFLD +
# RDMA + ISCSI + FCOE + EXTRA + HYPERV)
#
# NVI_UNIFIED = 28
# NFLIQ_UNIFIED = 106
# NETHCTRL_UNIFIED = 32
# NEQ_UNIFIED = 124
# NMPSTCAM_UNIFIED = 40
#
# The sum of all the MSI-X resources above is 74 MSI-X Vectors but we'll round
# that up to 128 to make sure the Unified PF doesn't run out of resources.
#
# NMSIX_UNIFIED = 128
#
# The Storage PFs could need up to NPORTS*NCPUS + NMSIX_EXTRA MSI-X Vectors
# which is 34 but they're probably safe with 32.
#
# NMSIX_STORAGE = 32

# Note: The UnifiedPF is PF4 which doesn't have any Virtual Functions
# associated with it.  Thus, the MSI-X Vector allocations we give to the
# UnifiedPF aren't inherited by any Virtual Functions.  As a result we can
# provision many more Virtual Functions than we can if the UnifiedPF were
# one of PF0-3.
#

# All of the below PCI-E parameters are actually stored in various *_init.txt
# files.  We include them below essentially as comments.
#
# For PF0-3 we assign 8 vectors each for NIC Ingress Queues of the associated
# ports 0-3.
#
# For PF4, the Unified PF, we give it an MSI-X Table Size as outlined above.
#
# For PF5-6 we assign enough MSI-X Vectors to support FCoE and iSCSI
# storage applications across all four possible ports.
#
# Additionally, since the UnifiedPF isn't one of the per-port Physical
# Functions, we give the UnifiedPF and the PF0-3 Physical Functions
# different PCI Device IDs which will allow Unified and Per-Port Drivers
# to directly select the type of Physical Function to which they wish to be
# attached.
#
# Note that the actual values used for the PCI-E Intelectual Property will be
# 1 less than those below since that's the way it "counts" things.  For
# readability, we use the number we actually mean ...
#
# PF0_INT = 8                   # NCPUS
# PF1_INT = 8                   # NCPUS
# PF0_3_INT = 32                # PF0_INT + PF1_INT + PF2_INT + PF3_INT
#
# PF4_INT = 128                 # NMSIX_UNIFIED
# PF5_INT = 32                  # NMSIX_STORAGE
# PF6_INT = 32                  # NMSIX_STORAGE
# PF7_INT = 0                   # Nothing Assigned
# PF4_7_INT = 192               # PF4_INT + PF5_INT + PF6_INT + PF7_INT
#
# PF0_7_INT = 224               # PF0_3_INT + PF4_7_INT
#
# With the above we can get 17 VFs/PF0-3 (limited by 336 MPS TCAM entries)
# but we'll lower that to 16 to make our total 64 and a nice power of 2 ...
#
# NVF = 16


# For those OSes which manage different ports on different PFs, we need
# only enough resources to support a single port's NIC application functions
# on PF0-3.  The below assumes that we're only doing NIC with NCPUS "Queue
# Sets" for ports 0-3.  The FCoE and iSCSI functions for such OSes will be
# managed on the "storage PFs" (see below).
#
[function "0"]
        nvf = 16                # NVF on this function
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 1                 # 1 port
        niqflint = 8            # NCPUS "Queue Sets"
        nethctrl = 8            # NCPUS "Queue Sets"
        neq = 16                # niqflint + nethctrl Egress Queues
        nexactf = 8             # number of exact MPSTCAM MAC filters
        cmask = all             # access to all channels
        pmask = 0x1             # access to only one port


[function "1"]
        nvf = 16                # NVF on this function
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 1                 # 1 port
        niqflint = 8            # NCPUS "Queue Sets"
        nethctrl = 8            # NCPUS "Queue Sets"
        neq = 16                # niqflint + nethctrl Egress Queues
        nexactf = 8             # number of exact MPSTCAM MAC filters
        cmask = all             # access to all channels
        pmask = 0x2             # access to only one port

[function "2"]
        nvf = 16                # NVF on this function
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 1                 # 1 port
        niqflint = 8            # NCPUS "Queue Sets"
        nethctrl = 8            # NCPUS "Queue Sets"
        neq = 16                # niqflint + nethctrl Egress Queues
        nexactf = 8             # number of exact MPSTCAM MAC filters
        cmask = all             # access to all channels
        pmask = 0x4             # access to only one port

[function "3"]
        nvf = 16                # NVF on this function
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 1                 # 1 port
        niqflint = 8            # NCPUS "Queue Sets"
        nethctrl = 8            # NCPUS "Queue Sets"
        neq = 16                # niqflint + nethctrl Egress Queues
        nexactf = 8             # number of exact MPSTCAM MAC filters
        cmask = all             # access to all channels
        pmask = 0x8             # access to only one port


# Some OS Drivers manage all application functions for all ports via PF4.
# Thus we need to provide a large number of resources here.  For Egress
# Queues we need to account for both TX Queues as well as Free List Queues
# (because the host is responsible for producing Free List Buffers for the
# hardware to consume).
#
[function "4"]
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 28                # NVI_UNIFIED
        niqflint = 202          # NFLIQ_UNIFIED + NLFIQ_WD + NFLIQ_CRYPTO (32)
        nethctrl = 100          # NETHCTRL_UNIFIED + NETHCTRL_WD
        neq = 256               # NEQ_UNIFIED + NEQ_WD
        nqpcq = 12288
        nexactf = 40            # NMPSTCAM_UNIFIED
        cmask = all             # access to all channels
        pmask = all             # access to all four ports ...
        nethofld = 1024         # number of user mode ethernet flow contexts
        ncrypto_lookaside = 16  # Number of lookaside flow contexts 
        nclip = 320             # number of clip region entries
        nfilter = 496           # number of filter region entries
        nserver = 496           # number of server region entries
        nhash = 12288           # number of hash region entries
        nhpfilter = 0           # number of high priority filter region entries
        protocol = nic_vm, ofld, rddp, rdmac, iscsi_initiator_pdu, iscsi_target_pdu, iscsi_t10dif, tlskeys, crypto_lookaside
        tp_l2t = 3072
        tp_ddp = 2
        tp_ddp_iscsi = 2
        tp_tls_key = 3
        tp_stag = 2
        tp_pbl = 5
        tp_rq = 7
        tp_srq = 128

# We have FCoE and iSCSI storage functions on PF5 and PF6 each of which may
# need to have Virtual Interfaces on each of the four ports with up to NCPUS
# "Queue Sets" each.
#
[function "5"]
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 4                 # NPORTS
        niqflint = 34           # NPORTS*NCPUS + NMSIX_EXTRA
        nethctrl = 32           # NPORTS*NCPUS
        neq = 64                # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX)
        nexactf = 16            # (NPORTS *(no of snmc grp + 1 hw mac) + 1 anmc grp)) rounded to 16.
        cmask = all             # access to all channels
        pmask = all             # access to all four ports ...
        nserver = 16
        nhash = 2048
        tp_l2t = 1020
        nclip = 64
        protocol = iscsi_initiator_fofld
        tp_ddp_iscsi = 2
        iscsi_ntask = 2048
        iscsi_nsess = 2048
        iscsi_nconn_per_session = 1
        iscsi_ninitiator_instance = 64


[function "6"]
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 4                 # NPORTS
        niqflint = 34           # NPORTS*NCPUS + NMSIX_EXTRA
        nethctrl = 32           # NPORTS*NCPUS
        neq = 66                # NPORTS*NCPUS * 2 (FL, ETHCTRL/TX) + 2 (EXTRA)
        nexactf = 32            # NPORTS + adding 28 exact entries for FCoE
                                # which is OK since < MIN(SUM PF0..3, PF4)
                                # and we never load PF0..3 and PF4 concurrently
        cmask = all             # access to all channels
        pmask = all             # access to all four ports ...
        nhash = 2048
        tp_l2t = 4
        protocol = fcoe_initiator
        tp_ddp = 2
        fcoe_nfcf = 16
        fcoe_nvnp = 32
        fcoe_nssn = 1024


# The following function, 1023, is not an actual PCIE function but is used to
# configure and reserve firmware internal resources that come from the global
# resource pool.
#
[function "1023"]
        wx_caps = all           # write/execute permissions for all commands
        r_caps = all            # read permissions for all commands
        nvi = 4                 # NVI_UNIFIED
        cmask = all             # access to all channels
        pmask = all             # access to all four ports ...
        nexactf = 8             # NPORTS + DCBX +
        nfilter = 16            # number of filter region entries


# For Virtual functions, we only allow NIC functionality and we only allow
# access to one port (1 << PF).  Note that because of limitations in the
# Scatter Gather Engine (SGE) hardware which checks writes to VF KDOORBELL
# and GTS registers, the number of Ingress and Egress Queues must be a power
# of 2.
#
[function "0/*"]                # NVF
        wx_caps = 0x82          # DMAQ | VF
        r_caps = 0x86           # DMAQ | VF | PORT
        nvi = 1                 # 1 port
        niqflint = 4            # 2 "Queue Sets" + NXIQ
        nethctrl = 2            # 2 "Queue Sets"
        neq = 4                 # 2 "Queue Sets" * 2
        nexactf = 4
        cmask = all             # access to all channels
        pmask = 0x1             # access to only one port ...


[function "1/*"]                # NVF
        wx_caps = 0x82          # DMAQ | VF
        r_caps = 0x86           # DMAQ | VF | PORT
        nvi = 1                 # 1 port
        niqflint = 4            # 2 "Queue Sets" + NXIQ
        nethctrl = 2            # 2 "Queue Sets"
        neq = 4                 # 2 "Queue Sets" * 2
        nexactf = 4
        cmask = all             # access to all channels
        pmask = 0x2             # access to only one port ...

[function "2/*"]                # NVF
        wx_caps = 0x82          # DMAQ | VF
        r_caps = 0x86           # DMAQ | VF | PORT
        nvi = 1                 # 1 port
        niqflint = 4            # 2 "Queue Sets" + NXIQ
        nethctrl = 2            # 2 "Queue Sets"
        neq = 4                 # 2 "Queue Sets" * 2
        nexactf = 4
        cmask = all             # access to all channels
        pmask = 0x1             # access to only one port ...


[function "3/*"]                # NVF
        wx_caps = 0x82          # DMAQ | VF
        r_caps = 0x86           # DMAQ | VF | PORT
        nvi = 1                 # 1 port
        niqflint = 4            # 2 "Queue Sets" + NXIQ
        nethctrl = 2            # 2 "Queue Sets"
        neq = 4                 # 2 "Queue Sets" * 2
        nexactf = 4
        cmask = all             # access to all channels
        pmask = 0x2             # access to only one port ...

# MPS features a 196608 bytes ingress buffer that is used for ingress buffering
# for packets from the wire as well as the loopback path of the L2 switch. The
# folling params control how the buffer memory is distributed and the L2 flow
# control settings:
#
# bg_mem:       %-age of mem to use for port/buffer group
# lpbk_mem:     %-age of port/bg mem to use for loopback
# hwm:          high watermark; bytes available when starting to send pause
#               frames (in units of 0.1 MTU)
# lwm:          low watermark; bytes remaining when sending 'unpause' frame
#               (in inuits of 0.1 MTU)
# dwm:          minimum delta between high and low watermark (in units of 100
#               Bytes)
#
[port "0"]
        dcb = ppp, dcbx         # configure for DCB PPP and enable DCBX offload
        #bg_mem = 25
        #lpbk_mem = 25
        hwm = 60
        lwm = 15
        dwm = 30
        dcb_app_tlv[0] = 0x8906, ethertype, 3
        dcb_app_tlv[1] = 0x8914, ethertype, 3
        dcb_app_tlv[2] = 3260, socketnum, 5
        aec_retry_cnt = 4


[port "1"]
        dcb = ppp, dcbx
        #bg_mem = 25
        #lpbk_mem = 25
        hwm = 60
        lwm = 15
        dwm = 30
        dcb_app_tlv[0] = 0x8906, ethertype, 3
        dcb_app_tlv[1] = 0x8914, ethertype, 3
        dcb_app_tlv[2] = 3260, socketnum, 5
        aec_retry_cnt = 4


[fini]
        version = 0x01000023
        checksum = 0x683208a2

# Total resources used by above allocations:
#   Virtual Interfaces: 104
#   Ingress Queues/w Free Lists and Interrupts: 526
#   Egress Queues: 702
#   MPS TCAM Entries: 336
#   MSI-X Vectors: 736
#   Virtual Functions: 64
#
# $FreeBSD$
#