]> CyberLeo.Net >> Repos - FreeBSD/stable/10.git/blob - sys/dev/usb/usbdi.h
MFC r361581:
[FreeBSD/stable/10.git] / sys / dev / usb / usbdi.h
1 /*-
2  * Copyright (c) 2009 Andrew Thompson
3  *
4  * Redistribution and use in source and binary forms, with or without
5  * modification, are permitted provided that the following conditions
6  * are met:
7  * 1. Redistributions of source code must retain the above copyright
8  *    notice, this list of conditions and the following disclaimer.
9  * 2. Redistributions in binary form must reproduce the above copyright
10  *    notice, this list of conditions and the following disclaimer in the
11  *    documentation and/or other materials provided with the distribution.
12  *
13  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
23  *
24  * $FreeBSD$
25  */
26 #ifndef _USB_USBDI_H_
27 #define _USB_USBDI_H_
28
29 struct usb_fifo;
30 struct usb_xfer;
31 struct usb_device;
32 struct usb_attach_arg;
33 struct usb_interface;
34 struct usb_endpoint;
35 struct usb_page_cache;
36 struct usb_page_search;
37 struct usb_process;
38 struct usb_proc_msg;
39 struct usb_mbuf;
40 struct usb_fs_privdata;
41 struct mbuf;
42
43 typedef enum {  /* keep in sync with usb_errstr_table */
44         USB_ERR_NORMAL_COMPLETION = 0,
45         USB_ERR_PENDING_REQUESTS,       /* 1 */
46         USB_ERR_NOT_STARTED,            /* 2 */
47         USB_ERR_INVAL,                  /* 3 */
48         USB_ERR_NOMEM,                  /* 4 */
49         USB_ERR_CANCELLED,              /* 5 */
50         USB_ERR_BAD_ADDRESS,            /* 6 */
51         USB_ERR_BAD_BUFSIZE,            /* 7 */
52         USB_ERR_BAD_FLAG,               /* 8 */
53         USB_ERR_NO_CALLBACK,            /* 9 */
54         USB_ERR_IN_USE,                 /* 10 */
55         USB_ERR_NO_ADDR,                /* 11 */
56         USB_ERR_NO_PIPE,                /* 12 */
57         USB_ERR_ZERO_NFRAMES,           /* 13 */
58         USB_ERR_ZERO_MAXP,              /* 14 */
59         USB_ERR_SET_ADDR_FAILED,        /* 15 */
60         USB_ERR_NO_POWER,               /* 16 */
61         USB_ERR_TOO_DEEP,               /* 17 */
62         USB_ERR_IOERROR,                /* 18 */
63         USB_ERR_NOT_CONFIGURED,         /* 19 */
64         USB_ERR_TIMEOUT,                /* 20 */
65         USB_ERR_SHORT_XFER,             /* 21 */
66         USB_ERR_STALLED,                /* 22 */
67         USB_ERR_INTERRUPTED,            /* 23 */
68         USB_ERR_DMA_LOAD_FAILED,        /* 24 */
69         USB_ERR_BAD_CONTEXT,            /* 25 */
70         USB_ERR_NO_ROOT_HUB,            /* 26 */
71         USB_ERR_NO_INTR_THREAD,         /* 27 */
72         USB_ERR_NOT_LOCKED,             /* 28 */
73         USB_ERR_MAX
74 } usb_error_t;
75
76 /*
77  * Flags for transfers
78  */
79 #define USB_FORCE_SHORT_XFER    0x0001  /* force a short transmit last */
80 #define USB_SHORT_XFER_OK       0x0004  /* allow short reads */
81 #define USB_DELAY_STATUS_STAGE  0x0010  /* insert delay before STATUS stage */
82 #define USB_USER_DATA_PTR       0x0020  /* internal flag */
83 #define USB_MULTI_SHORT_OK      0x0040  /* allow multiple short frames */
84 #define USB_MANUAL_STATUS       0x0080  /* manual ctrl status */
85
86 #define USB_NO_TIMEOUT 0
87 #define USB_DEFAULT_TIMEOUT 5000        /* 5000 ms = 5 seconds */
88
89 #if defined(_KERNEL)
90 /* typedefs */
91
92 typedef void (usb_callback_t)(struct usb_xfer *, usb_error_t);
93 typedef void (usb_proc_callback_t)(struct usb_proc_msg *);
94 typedef usb_error_t (usb_handle_req_t)(struct usb_device *,
95     struct usb_device_request *, const void **, uint16_t *);
96
97 typedef int (usb_fifo_open_t)(struct usb_fifo *fifo, int fflags);
98 typedef void (usb_fifo_close_t)(struct usb_fifo *fifo, int fflags);
99 typedef int (usb_fifo_ioctl_t)(struct usb_fifo *fifo, u_long cmd, void *addr, int fflags);
100 typedef void (usb_fifo_cmd_t)(struct usb_fifo *fifo);
101 typedef void (usb_fifo_filter_t)(struct usb_fifo *fifo, struct usb_mbuf *m);
102
103
104 /* USB events */
105 #ifndef USB_GLOBAL_INCLUDE_FILE
106 #include <sys/eventhandler.h>
107 #endif
108 typedef void (*usb_dev_configured_t)(void *, struct usb_device *,
109     struct usb_attach_arg *);
110 EVENTHANDLER_DECLARE(usb_dev_configured, usb_dev_configured_t);
111
112 /*
113  * The following macros are used used to convert milliseconds into
114  * HZ. We use 1024 instead of 1000 milliseconds per second to save a
115  * full division.
116  */
117 #define USB_MS_HZ 1024
118
119 #define USB_MS_TO_TICKS(ms) \
120   (((uint32_t)((((uint32_t)(ms)) * ((uint32_t)(hz))) + USB_MS_HZ - 1)) / USB_MS_HZ)
121
122 /*
123  * Common queue structure for USB transfers.
124  */
125 struct usb_xfer_queue {
126         TAILQ_HEAD(, usb_xfer) head;
127         struct usb_xfer *curr;          /* current USB transfer processed */
128         void    (*command) (struct usb_xfer_queue *pq);
129         uint8_t recurse_1:1;
130         uint8_t recurse_2:1;
131         uint8_t recurse_3:1;
132         uint8_t reserved:5;
133 };
134
135 /*
136  * The following structure defines an USB endpoint
137  * USB endpoint.
138  */
139 struct usb_endpoint {
140         /* queue of USB transfers */
141         struct usb_xfer_queue endpoint_q[USB_MAX_EP_STREAMS];
142
143         struct usb_endpoint_descriptor *edesc;
144         struct usb_endpoint_ss_comp_descriptor *ecomp;
145         struct usb_pipe_methods *methods;       /* set by HC driver */
146
147         uint16_t isoc_next;
148
149         uint8_t toggle_next:1;          /* next data toggle value */
150         uint8_t is_stalled:1;           /* set if endpoint is stalled */
151         uint8_t is_synced:1;            /* set if we a synchronised */
152         uint8_t unused:5;
153         uint8_t iface_index;            /* not used by "default endpoint" */
154
155         uint8_t refcount_alloc;         /* allocation refcount */
156         uint8_t refcount_bw;            /* bandwidth refcount */
157 #define USB_EP_REF_MAX 0x3f
158
159         /* High-Speed resource allocation (valid if "refcount_bw" > 0) */
160
161         uint8_t usb_smask;              /* USB start mask */
162         uint8_t usb_cmask;              /* USB complete mask */
163         uint8_t usb_uframe;             /* USB microframe */
164
165         /* USB endpoint mode, see USB_EP_MODE_XXX */
166
167         uint8_t ep_mode;
168 };
169
170 /*
171  * The following structure defines an USB interface.
172  */
173 struct usb_interface {
174         struct usb_interface_descriptor *idesc;
175         device_t subdev;
176         uint8_t alt_index;
177         uint8_t parent_iface_index;
178
179         /* Linux compat */
180         struct usb_host_interface *altsetting;
181         struct usb_host_interface *cur_altsetting;
182         struct usb_device *linux_udev;
183         void   *bsd_priv_sc;            /* device specific information */
184         char   *pnpinfo;                /* additional PnP-info for this interface */
185         uint8_t num_altsetting;         /* number of alternate settings */
186         uint8_t bsd_iface_index;
187 };
188
189 /*
190  * The following structure defines a set of USB transfer flags.
191  */
192 struct usb_xfer_flags {
193         uint8_t force_short_xfer:1;     /* force a short transmit transfer
194                                          * last */
195         uint8_t short_xfer_ok:1;        /* allow short receive transfers */
196         uint8_t short_frames_ok:1;      /* allow short frames */
197         uint8_t pipe_bof:1;             /* block pipe on failure */
198         uint8_t proxy_buffer:1;         /* makes buffer size a factor of
199                                          * "max_frame_size" */
200         uint8_t ext_buffer:1;           /* uses external DMA buffer */
201         uint8_t manual_status:1;        /* non automatic status stage on
202                                          * control transfers */
203         uint8_t no_pipe_ok:1;           /* set if "USB_ERR_NO_PIPE" error can
204                                          * be ignored */
205         uint8_t stall_pipe:1;           /* set if the endpoint belonging to
206                                          * this USB transfer should be stalled
207                                          * before starting this transfer! */
208         uint8_t pre_scale_frames:1;     /* "usb_config->frames" is
209                                          * assumed to give the
210                                          * buffering time in
211                                          * milliseconds and is
212                                          * converted into the nearest
213                                          * number of frames when the
214                                          * USB transfer is setup. This
215                                          * option only has effect for
216                                          * ISOCHRONOUS transfers.
217                                          */
218 };
219
220 /*
221  * The following structure define an USB configuration, that basically
222  * is used when setting up an USB transfer.
223  */
224 struct usb_config {
225         usb_callback_t *callback;       /* USB transfer callback */
226         usb_frlength_t bufsize; /* total pipe buffer size in bytes */
227         usb_frcount_t frames;           /* maximum number of USB frames */
228         usb_timeout_t interval; /* interval in milliseconds */
229 #define USB_DEFAULT_INTERVAL    0
230         usb_timeout_t timeout;          /* transfer timeout in milliseconds */
231         struct usb_xfer_flags flags;    /* transfer flags */
232         usb_stream_t stream_id;         /* USB3.0 specific */
233         enum usb_hc_mode usb_mode;      /* host or device mode */
234         uint8_t type;                   /* pipe type */
235         uint8_t endpoint;               /* pipe number */
236         uint8_t direction;              /* pipe direction */
237         uint8_t ep_index;               /* pipe index match to use */
238         uint8_t if_index;               /* "ifaces" index to use */
239 };
240
241 /*
242  * Use these macro when defining USB device ID arrays if you want to
243  * have your driver module automatically loaded in host, device or
244  * both modes respectivly:
245  */
246 #if USB_HAVE_ID_SECTION
247 #define STRUCT_USB_HOST_ID \
248     struct usb_device_id __section("usb_host_id")
249 #define STRUCT_USB_DEVICE_ID \
250     struct usb_device_id __section("usb_device_id")
251 #define STRUCT_USB_DUAL_ID \
252     struct usb_device_id __section("usb_dual_id")
253 #else
254 #define STRUCT_USB_HOST_ID \
255     struct usb_device_id
256 #define STRUCT_USB_DEVICE_ID \
257     struct usb_device_id
258 #define STRUCT_USB_DUAL_ID \
259     struct usb_device_id
260 #endif                  /* USB_HAVE_ID_SECTION */
261
262 /*
263  * The following structure is used when looking up an USB driver for
264  * an USB device. It is inspired by the Linux structure called
265  * "usb_device_id".
266  */
267 struct usb_device_id {
268
269         /* Hook for driver specific information */
270         unsigned long driver_info;
271
272         /* Used for product specific matches; the BCD range is inclusive */
273         uint16_t idVendor;
274         uint16_t idProduct;
275         uint16_t bcdDevice_lo;
276         uint16_t bcdDevice_hi;
277
278         /* Used for device class matches */
279         uint8_t bDeviceClass;
280         uint8_t bDeviceSubClass;
281         uint8_t bDeviceProtocol;
282
283         /* Used for interface class matches */
284         uint8_t bInterfaceClass;
285         uint8_t bInterfaceSubClass;
286         uint8_t bInterfaceProtocol;
287
288         /* Select which fields to match against */
289         uint8_t match_flag_vendor:1;
290         uint8_t match_flag_product:1;
291         uint8_t match_flag_dev_lo:1;
292         uint8_t match_flag_dev_hi:1;
293
294         uint8_t match_flag_dev_class:1;
295         uint8_t match_flag_dev_subclass:1;
296         uint8_t match_flag_dev_protocol:1;
297         uint8_t match_flag_int_class:1;
298
299         uint8_t match_flag_int_subclass:1;
300         uint8_t match_flag_int_protocol:1;
301         uint8_t match_flag_unused:6;
302
303 #if USB_HAVE_COMPAT_LINUX
304         /* which fields to match against */
305         uint16_t match_flags;
306 #define USB_DEVICE_ID_MATCH_VENDOR              0x0001
307 #define USB_DEVICE_ID_MATCH_PRODUCT             0x0002
308 #define USB_DEVICE_ID_MATCH_DEV_LO              0x0004
309 #define USB_DEVICE_ID_MATCH_DEV_HI              0x0008
310 #define USB_DEVICE_ID_MATCH_DEV_CLASS           0x0010
311 #define USB_DEVICE_ID_MATCH_DEV_SUBCLASS        0x0020
312 #define USB_DEVICE_ID_MATCH_DEV_PROTOCOL        0x0040
313 #define USB_DEVICE_ID_MATCH_INT_CLASS           0x0080
314 #define USB_DEVICE_ID_MATCH_INT_SUBCLASS        0x0100
315 #define USB_DEVICE_ID_MATCH_INT_PROTOCOL        0x0200
316 #endif
317 } __aligned(32);
318
319 /* check that the size of the structure above is correct */
320 extern char usb_device_id_assert[(sizeof(struct usb_device_id) == 32) ? 1 : -1];
321
322 #define USB_VENDOR(vend)                        \
323   .match_flag_vendor = 1, .idVendor = (vend)
324
325 #define USB_PRODUCT(prod)                       \
326   .match_flag_product = 1, .idProduct = (prod)
327
328 #define USB_VP(vend,prod)                       \
329   USB_VENDOR(vend), USB_PRODUCT(prod)
330
331 #define USB_VPI(vend,prod,info)                 \
332   USB_VENDOR(vend), USB_PRODUCT(prod), USB_DRIVER_INFO(info)
333
334 #define USB_DEV_BCD_GTEQ(lo)    /* greater than or equal */ \
335   .match_flag_dev_lo = 1, .bcdDevice_lo = (lo)
336
337 #define USB_DEV_BCD_LTEQ(hi)    /* less than or equal */ \
338   .match_flag_dev_hi = 1, .bcdDevice_hi = (hi)
339
340 #define USB_DEV_CLASS(dc)                       \
341   .match_flag_dev_class = 1, .bDeviceClass = (dc)
342
343 #define USB_DEV_SUBCLASS(dsc)                   \
344   .match_flag_dev_subclass = 1, .bDeviceSubClass = (dsc)
345
346 #define USB_DEV_PROTOCOL(dp)                    \
347   .match_flag_dev_protocol = 1, .bDeviceProtocol = (dp)
348
349 #define USB_IFACE_CLASS(ic)                     \
350   .match_flag_int_class = 1, .bInterfaceClass = (ic)
351
352 #define USB_IFACE_SUBCLASS(isc)                 \
353   .match_flag_int_subclass = 1, .bInterfaceSubClass = (isc)
354
355 #define USB_IFACE_PROTOCOL(ip)                  \
356   .match_flag_int_protocol = 1, .bInterfaceProtocol = (ip)
357
358 #define USB_IF_CSI(class,subclass,info)                 \
359   USB_IFACE_CLASS(class), USB_IFACE_SUBCLASS(subclass), USB_DRIVER_INFO(info)
360
361 #define USB_DRIVER_INFO(n)                      \
362   .driver_info = (n)
363
364 #define USB_GET_DRIVER_INFO(did)                \
365   (did)->driver_info
366
367 /*
368  * The following structure keeps information that is used to match
369  * against an array of "usb_device_id" elements.
370  */
371 struct usbd_lookup_info {
372         uint16_t idVendor;
373         uint16_t idProduct;
374         uint16_t bcdDevice;
375         uint8_t bDeviceClass;
376         uint8_t bDeviceSubClass;
377         uint8_t bDeviceProtocol;
378         uint8_t bInterfaceClass;
379         uint8_t bInterfaceSubClass;
380         uint8_t bInterfaceProtocol;
381         uint8_t bIfaceIndex;
382         uint8_t bIfaceNum;
383         uint8_t bConfigIndex;
384         uint8_t bConfigNum;
385 };
386
387 /* Structure used by probe and attach */
388
389 struct usb_attach_arg {
390         struct usbd_lookup_info info;
391         device_t temp_dev;              /* for internal use */
392         unsigned long driver_info;      /* for internal use */
393         void *driver_ivar;
394         struct usb_device *device;      /* current device */
395         struct usb_interface *iface;    /* current interface */
396         enum usb_hc_mode usb_mode;      /* host or device mode */
397         uint8_t port;
398         uint8_t dev_state;
399 #define UAA_DEV_READY           0
400 #define UAA_DEV_DISABLED        1
401 #define UAA_DEV_EJECTING        2
402 };
403
404 /*
405  * The following is a wrapper for the callout structure to ease
406  * porting the code to other platforms.
407  */
408 struct usb_callout {
409         struct callout co;
410 };
411 #define usb_callout_init_mtx(c,m,f) callout_init_mtx(&(c)->co,m,f)
412 #define usb_callout_reset(c,t,f,d) callout_reset(&(c)->co,t,f,d)
413 #define usb_callout_stop(c) callout_stop(&(c)->co)
414 #define usb_callout_drain(c) callout_drain(&(c)->co)
415 #define usb_callout_pending(c) callout_pending(&(c)->co)
416
417 /* USB transfer states */
418
419 #define USB_ST_SETUP       0
420 #define USB_ST_TRANSFERRED 1
421 #define USB_ST_ERROR       2
422
423 /* USB handle request states */
424 #define USB_HR_NOT_COMPLETE     0
425 #define USB_HR_COMPLETE_OK      1
426 #define USB_HR_COMPLETE_ERR     2
427
428 /*
429  * The following macro will return the current state of an USB
430  * transfer like defined by the "USB_ST_XXX" enums.
431  */
432 #define USB_GET_STATE(xfer) (usbd_xfer_state(xfer))
433
434 /*
435  * The following structure defines the USB process message header.
436  */
437 struct usb_proc_msg {
438         TAILQ_ENTRY(usb_proc_msg) pm_qentry;
439         usb_proc_callback_t *pm_callback;
440         usb_size_t pm_num;
441 };
442
443 #define USB_FIFO_TX 0
444 #define USB_FIFO_RX 1
445
446 /*
447  * Locking note for the following functions.  All the
448  * "usb_fifo_cmd_t" and "usb_fifo_filter_t" functions are called
449  * locked. The others are called unlocked.
450  */
451 struct usb_fifo_methods {
452         usb_fifo_open_t *f_open;
453         usb_fifo_close_t *f_close;
454         usb_fifo_ioctl_t *f_ioctl;
455         /*
456          * NOTE: The post-ioctl callback is called after the USB reference
457          * gets locked in the IOCTL handler:
458          */
459         usb_fifo_ioctl_t *f_ioctl_post;
460         usb_fifo_cmd_t *f_start_read;
461         usb_fifo_cmd_t *f_stop_read;
462         usb_fifo_cmd_t *f_start_write;
463         usb_fifo_cmd_t *f_stop_write;
464         usb_fifo_filter_t *f_filter_read;
465         usb_fifo_filter_t *f_filter_write;
466         const char *basename[4];
467         const char *postfix[4];
468 };
469
470 struct usb_fifo_sc {
471         struct usb_fifo *fp[2];
472         struct usb_fs_privdata *dev;
473 };
474
475 const char *usbd_errstr(usb_error_t error);
476 void    *usbd_find_descriptor(struct usb_device *udev, void *id,
477             uint8_t iface_index, uint8_t type, uint8_t type_mask,
478             uint8_t subtype, uint8_t subtype_mask);
479 struct usb_config_descriptor *usbd_get_config_descriptor(
480             struct usb_device *udev);
481 struct usb_device_descriptor *usbd_get_device_descriptor(
482             struct usb_device *udev);
483 struct usb_interface *usbd_get_iface(struct usb_device *udev,
484             uint8_t iface_index);
485 struct usb_interface_descriptor *usbd_get_interface_descriptor(
486             struct usb_interface *iface);
487 struct usb_endpoint *usbd_get_endpoint(struct usb_device *udev, uint8_t iface_index,
488                     const struct usb_config *setup);
489 struct usb_endpoint *usbd_get_ep_by_addr(struct usb_device *udev, uint8_t ea_val);
490 usb_error_t     usbd_interface_count(struct usb_device *udev, uint8_t *count);
491 enum usb_hc_mode usbd_get_mode(struct usb_device *udev);
492 enum usb_dev_speed usbd_get_speed(struct usb_device *udev);
493 void    device_set_usb_desc(device_t dev);
494 void    usb_pause_mtx(struct mtx *mtx, int _ticks);
495 usb_error_t     usbd_set_pnpinfo(struct usb_device *udev,
496                         uint8_t iface_index, const char *pnpinfo);
497 usb_error_t     usbd_add_dynamic_quirk(struct usb_device *udev,
498                         uint16_t quirk);
499 usb_error_t     usbd_set_endpoint_mode(struct usb_device *udev,
500                         struct usb_endpoint *ep, uint8_t ep_mode);
501 uint8_t         usbd_get_endpoint_mode(struct usb_device *udev,
502                         struct usb_endpoint *ep);
503
504 const struct usb_device_id *usbd_lookup_id_by_info(
505             const struct usb_device_id *id, usb_size_t sizeof_id,
506             const struct usbd_lookup_info *info);
507 int     usbd_lookup_id_by_uaa(const struct usb_device_id *id,
508             usb_size_t sizeof_id, struct usb_attach_arg *uaa);
509
510 usb_error_t usbd_do_request_flags(struct usb_device *udev, struct mtx *mtx,
511                     struct usb_device_request *req, void *data, uint16_t flags,
512                     uint16_t *actlen, usb_timeout_t timeout);
513 #define usbd_do_request(u,m,r,d) \
514   usbd_do_request_flags(u,m,r,d,0,NULL,USB_DEFAULT_TIMEOUT)
515
516 uint8_t usbd_clear_stall_callback(struct usb_xfer *xfer1,
517             struct usb_xfer *xfer2);
518 uint8_t usbd_get_interface_altindex(struct usb_interface *iface);
519 usb_error_t usbd_set_alt_interface_index(struct usb_device *udev,
520             uint8_t iface_index, uint8_t alt_index);
521 uint32_t usbd_get_isoc_fps(struct usb_device *udev);
522 uint32_t usbd_get_max_frame_length(const struct usb_endpoint_descriptor *,
523     const struct usb_endpoint_ss_comp_descriptor *,
524     enum usb_dev_speed);
525 usb_error_t usbd_transfer_setup(struct usb_device *udev,
526             const uint8_t *ifaces, struct usb_xfer **pxfer,
527             const struct usb_config *setup_start, uint16_t n_setup,
528             void *priv_sc, struct mtx *priv_mtx);
529 void    usbd_transfer_submit(struct usb_xfer *xfer);
530 void    usbd_transfer_clear_stall(struct usb_xfer *xfer);
531 void    usbd_transfer_drain(struct usb_xfer *xfer);
532 uint8_t usbd_transfer_pending(struct usb_xfer *xfer);
533 void    usbd_transfer_start(struct usb_xfer *xfer);
534 void    usbd_transfer_stop(struct usb_xfer *xfer);
535 void    usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup);
536 void    usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max);
537 void    usbd_set_parent_iface(struct usb_device *udev, uint8_t iface_index,
538             uint8_t parent_index);
539 uint8_t usbd_get_bus_index(struct usb_device *udev);
540 uint8_t usbd_get_device_index(struct usb_device *udev);
541 void    usbd_set_power_mode(struct usb_device *udev, uint8_t power_mode);
542 uint8_t usbd_filter_power_mode(struct usb_device *udev, uint8_t power_mode);
543 uint8_t usbd_device_attached(struct usb_device *udev);
544
545 usb_frlength_t
546         usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex);
547 void    usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen,
548             int *aframes, int *nframes);
549 struct usb_page_cache *usbd_xfer_get_frame(struct usb_xfer *, usb_frcount_t);
550 void    *usbd_xfer_get_frame_buffer(struct usb_xfer *, usb_frcount_t);
551 void    *usbd_xfer_softc(struct usb_xfer *xfer);
552 void    *usbd_xfer_get_priv(struct usb_xfer *xfer);
553 void    usbd_xfer_set_priv(struct usb_xfer *xfer, void *);
554 void    usbd_xfer_set_interval(struct usb_xfer *xfer, int);
555 uint8_t usbd_xfer_state(struct usb_xfer *xfer);
556 void    usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
557             void *ptr, usb_frlength_t len);
558 void    usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
559             void **ptr, int *len);
560 void    usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset,
561             usb_frcount_t frindex);
562 usb_frlength_t usbd_xfer_max_len(struct usb_xfer *xfer);
563 usb_frlength_t usbd_xfer_max_framelen(struct usb_xfer *xfer);
564 usb_frcount_t usbd_xfer_max_frames(struct usb_xfer *xfer);
565 uint8_t usbd_xfer_get_fps_shift(struct usb_xfer *xfer);
566 usb_frlength_t usbd_xfer_frame_len(struct usb_xfer *xfer,
567             usb_frcount_t frindex);
568 void    usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex,
569             usb_frlength_t len);
570 void    usbd_xfer_set_timeout(struct usb_xfer *xfer, int timeout);
571 void    usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n);
572 void    usbd_xfer_set_stall(struct usb_xfer *xfer);
573 int     usbd_xfer_is_stalled(struct usb_xfer *xfer);
574 void    usbd_xfer_set_flag(struct usb_xfer *xfer, int flag);
575 void    usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag);
576 uint16_t usbd_xfer_get_timestamp(struct usb_xfer *xfer);
577 uint8_t usbd_xfer_maxp_was_clamped(struct usb_xfer *xfer);
578
579 void    usbd_copy_in(struct usb_page_cache *cache, usb_frlength_t offset,
580             const void *ptr, usb_frlength_t len);
581 int     usbd_copy_in_user(struct usb_page_cache *cache, usb_frlength_t offset,
582             const void *ptr, usb_frlength_t len);
583 void    usbd_copy_out(struct usb_page_cache *cache, usb_frlength_t offset,
584             void *ptr, usb_frlength_t len);
585 int     usbd_copy_out_user(struct usb_page_cache *cache, usb_frlength_t offset,
586             void *ptr, usb_frlength_t len);
587 void    usbd_get_page(struct usb_page_cache *pc, usb_frlength_t offset,
588             struct usb_page_search *res);
589 void    usbd_m_copy_in(struct usb_page_cache *cache, usb_frlength_t dst_offset,
590             struct mbuf *m, usb_size_t src_offset, usb_frlength_t src_len);
591 void    usbd_frame_zero(struct usb_page_cache *cache, usb_frlength_t offset,
592             usb_frlength_t len);
593 void    usbd_start_re_enumerate(struct usb_device *udev);
594 usb_error_t
595         usbd_start_set_config(struct usb_device *, uint8_t);
596
597 int     usb_fifo_attach(struct usb_device *udev, void *priv_sc,
598             struct mtx *priv_mtx, struct usb_fifo_methods *pm,
599             struct usb_fifo_sc *f_sc, uint16_t unit, int16_t subunit,
600             uint8_t iface_index, uid_t uid, gid_t gid, int mode);
601 void    usb_fifo_detach(struct usb_fifo_sc *f_sc);
602 int     usb_fifo_alloc_buffer(struct usb_fifo *f, uint32_t bufsize,
603             uint16_t nbuf);
604 void    usb_fifo_free_buffer(struct usb_fifo *f);
605 uint32_t usb_fifo_put_bytes_max(struct usb_fifo *fifo);
606 void    usb_fifo_put_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
607             usb_frlength_t offset, usb_frlength_t len, uint8_t what);
608 void    usb_fifo_put_data_linear(struct usb_fifo *fifo, void *ptr,
609             usb_size_t len, uint8_t what);
610 uint8_t usb_fifo_put_data_buffer(struct usb_fifo *f, void *ptr, usb_size_t len);
611 void    usb_fifo_put_data_error(struct usb_fifo *fifo);
612 uint8_t usb_fifo_get_data(struct usb_fifo *fifo, struct usb_page_cache *pc,
613             usb_frlength_t offset, usb_frlength_t len, usb_frlength_t *actlen,
614             uint8_t what);
615 uint8_t usb_fifo_get_data_linear(struct usb_fifo *fifo, void *ptr,
616             usb_size_t len, usb_size_t *actlen, uint8_t what);
617 uint8_t usb_fifo_get_data_buffer(struct usb_fifo *f, void **pptr,
618             usb_size_t *plen);
619 void    usb_fifo_reset(struct usb_fifo *f);
620 void    usb_fifo_wakeup(struct usb_fifo *f);
621 void    usb_fifo_get_data_error(struct usb_fifo *fifo);
622 void    *usb_fifo_softc(struct usb_fifo *fifo);
623 void    usb_fifo_set_close_zlp(struct usb_fifo *, uint8_t);
624 void    usb_fifo_set_write_defrag(struct usb_fifo *, uint8_t);
625 void    usb_fifo_free(struct usb_fifo *f);
626 #endif /* _KERNEL */
627 #endif /* _USB_USBDI_H_ */