usr.sbin/usbconfig/usbconfig.c

   1 /* $FreeBSD$ */
   2 /*-
   3  * Copyright (c) 2008-2009 Hans Petter Selasky. All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer.
  10  * 2. Redistributions in binary form must reproduce the above copyright
  11  *    notice, this list of conditions and the following disclaimer in the
  12  *    documentation and/or other materials provided with the distribution.
  13  *
  14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  24  * SUCH DAMAGE.
  25  */
  26
  27 #include <stdio.h>
  28 #include <stdlib.h>
  29 #include <stdint.h>
  30 #include <err.h>
  31 #include <string.h>
  32 #include <pwd.h>
  33 #include <grp.h>
  34 #include <errno.h>
  35 #include <ctype.h>
  36 #include <sys/types.h>
  37
  38 #include <libusb20_desc.h>
  39 #include <libusb20.h>
  40
  41 #include "dump.h"
  42
  43 struct options {
  44         const char *quirkname;
  45         void   *buffer;
  46         int template;
  47         gid_t   gid;
  48         uid_t   uid;
  49         mode_t  mode;
  50         uint32_t got_any;
  51         struct LIBUSB20_CONTROL_SETUP_DECODED setup;
  52         uint16_t bus;
  53         uint16_t addr;
  54         uint16_t iface;
  55         uint16_t vid;
  56         uint16_t pid;
  57         uint16_t lo_rev;                /* inclusive */
  58         uint16_t hi_rev;                /* inclusive */
  59         uint8_t string_index;
  60         uint8_t config_index;
  61         uint8_t alt_index;
  62         uint8_t got_list:1;
  63         uint8_t got_bus:1;
  64         uint8_t got_addr:1;
  65         uint8_t got_iface:1;
  66         uint8_t got_set_config:1;
  67         uint8_t got_set_alt:1;
  68         uint8_t got_set_template:1;
  69         uint8_t got_get_template:1;
  70         uint8_t got_suspend:1;
  71         uint8_t got_resume:1;
  72         uint8_t got_reset:1;
  73         uint8_t got_power_off:1;
  74         uint8_t got_power_save:1;
  75         uint8_t got_power_on:1;
  76         uint8_t got_dump_device_quirks:1;
  77         uint8_t got_dump_quirk_names:1;
  78         uint8_t got_dump_all_desc:1;
  79         uint8_t got_dump_device_desc:1;
  80         uint8_t got_dump_curr_config:1;
  81         uint8_t got_dump_all_config:1;
  82         uint8_t got_dump_info:1;
  83         uint8_t got_dump_stats:1;
  84         uint8_t got_show_iface_driver:1;
  85         uint8_t got_remove_device_quirk:1;
  86         uint8_t got_add_device_quirk:1;
  87         uint8_t got_remove_quirk:1;
  88         uint8_t got_add_quirk:1;
  89         uint8_t got_dump_string:1;
  90         uint8_t got_do_request:1;
  91         uint8_t got_detach_kernel_driver:1;
  92 };
  93
  94 struct token {
  95         const char *name;
  96         uint8_t value;
  97         uint8_t narg;
  98 };
  99
 100 enum {
 101         T_UNIT,
 102         T_ADDR,
 103         T_UGEN,
 104         T_IFACE,
 105         T_SET_CONFIG,
 106         T_SET_ALT,
 107         T_SET_TEMPLATE,
 108         T_GET_TEMPLATE,
 109         T_ADD_DEVICE_QUIRK,
 110         T_REMOVE_DEVICE_QUIRK,
 111         T_ADD_QUIRK,
 112         T_REMOVE_QUIRK,
 113         T_SHOW_IFACE_DRIVER,
 114         T_DETACH_KERNEL_DRIVER,
 115         T_DUMP_QUIRK_NAMES,
 116         T_DUMP_DEVICE_QUIRKS,
 117         T_DUMP_ALL_DESC,
 118         T_DUMP_DEVICE_DESC,
 119         T_DUMP_CURR_CONFIG_DESC,
 120         T_DUMP_ALL_CONFIG_DESC,
 121         T_DUMP_STRING,
 122         T_DUMP_INFO,
 123         T_DUMP_STATS,
 124         T_SUSPEND,
 125         T_RESUME,
 126         T_POWER_OFF,
 127         T_POWER_SAVE,
 128         T_POWER_ON,
 129         T_RESET,
 130         T_LIST,
 131         T_DO_REQUEST,
 132 };
 133
 134 static struct options options;
 135
 136 static const struct token token[] = {
 137         {"-u", T_UNIT, 1},
 138         {"-a", T_ADDR, 1},
 139         {"-d", T_UGEN, 1},
 140         {"-i", T_IFACE, 1},
 141         {"set_config", T_SET_CONFIG, 1},
 142         {"set_alt", T_SET_ALT, 1},
 143         {"set_template", T_SET_TEMPLATE, 1},
 144         {"get_template", T_GET_TEMPLATE, 0},
 145         {"add_dev_quirk_vplh", T_ADD_DEVICE_QUIRK, 5},
 146         {"remove_dev_quirk_vplh", T_REMOVE_DEVICE_QUIRK, 5},
 147         {"add_quirk", T_ADD_QUIRK, 1},
 148         {"remove_quirk", T_REMOVE_QUIRK, 1},
 149         {"detach_kernel_driver", T_DETACH_KERNEL_DRIVER, 0},
 150         {"dump_quirk_names", T_DUMP_QUIRK_NAMES, 0},
 151         {"dump_device_quirks", T_DUMP_DEVICE_QUIRKS, 0},
 152         {"dump_all_desc", T_DUMP_ALL_DESC, 0},
 153         {"dump_device_desc", T_DUMP_DEVICE_DESC, 0},
 154         {"dump_curr_config_desc", T_DUMP_CURR_CONFIG_DESC, 0},
 155         {"dump_all_config_desc", T_DUMP_ALL_CONFIG_DESC, 0},
 156         {"dump_string", T_DUMP_STRING, 1},
 157         {"dump_info", T_DUMP_INFO, 0},
 158         {"dump_stats", T_DUMP_STATS, 0},
 159         {"show_ifdrv", T_SHOW_IFACE_DRIVER, 0},
 160         {"suspend", T_SUSPEND, 0},
 161         {"resume", T_RESUME, 0},
 162         {"power_off", T_POWER_OFF, 0},
 163         {"power_save", T_POWER_SAVE, 0},
 164         {"power_on", T_POWER_ON, 0},
 165         {"reset", T_RESET, 0},
 166         {"list", T_LIST, 0},
 167         {"do_request", T_DO_REQUEST, 5},
 168 };
 169
 170 static void
 171 be_dev_remove_quirk(struct libusb20_backend *pbe,
 172     uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
 173     const char *str)
 174 {
 175         struct libusb20_quirk q;
 176         int error;
 177
 178         memset(&q, 0, sizeof(q));
 179
 180         q.vid = vid;
 181         q.pid = pid;
 182         q.bcdDeviceLow = lorev;
 183         q.bcdDeviceHigh = hirev;
 184         strlcpy(q.quirkname, str, sizeof(q.quirkname));
 185
 186         error = libusb20_be_remove_dev_quirk(pbe, &q);
 187         if (error) {
 188                 fprintf(stderr, "Removing quirk '%s' failed, continuing.\n", str);
 189         }
 190         return;
 191 }
 192
 193 static void
 194 be_dev_add_quirk(struct libusb20_backend *pbe,
 195     uint16_t vid, uint16_t pid, uint16_t lorev, uint16_t hirev,
 196     const char *str)
 197 {
 198         struct libusb20_quirk q;
 199         int error;
 200
 201         memset(&q, 0, sizeof(q));
 202
 203         q.vid = vid;
 204         q.pid = pid;
 205         q.bcdDeviceLow = lorev;
 206         q.bcdDeviceHigh = hirev;
 207         strlcpy(q.quirkname, str, sizeof(q.quirkname));
 208
 209         error = libusb20_be_add_dev_quirk(pbe, &q);
 210         if (error) {
 211                 fprintf(stderr, "Adding quirk '%s' failed, continuing.\n", str);
 212         }
 213         return;
 214 }
 215
 216 static uint8_t
 217 get_token(const char *str, uint8_t narg)
 218 {
 219         uint8_t n;
 220
 221         for (n = 0; n != (sizeof(token) / sizeof(token[0])); n++) {
 222                 if (strcasecmp(str, token[n].name) == 0) {
 223                         if (token[n].narg > narg) {
 224                                 /* too few arguments */
 225                                 break;
 226                         }
 227                         return (token[n].value);
 228                 }
 229         }
 230         return (0 - 1);
 231 }
 232
 233 static uid_t
 234 num_id(const char *name, const char *type)
 235 {
 236         uid_t val;
 237         char *ep;
 238
 239         errno = 0;
 240         val = strtoul(name, &ep, 0);
 241         if (errno) {
 242                 err(1, "%s", name);
 243         }
 244         if (*ep != '\0') {
 245                 errx(1, "%s: illegal %s name", name, type);
 246         }
 247         return (val);
 248 }
 249
 250 static int
 251 get_int(const char *s)
 252 {
 253         int val;
 254         char *ep;
 255
 256         errno = 0;
 257         val = strtoul(s, &ep, 0);
 258         if (errno) {
 259                 err(1, "%s", s);
 260         }
 261         if (*ep != '\0') {
 262                 errx(1, "illegal number: %s", s);
 263         }
 264         return val;
 265 }
 266
 267 static void
 268 duplicate_option(const char *ptr)
 269 {
 270         fprintf(stderr, "Syntax error: "
 271             "Duplicate option: '%s'\n", ptr);
 272         exit(1);
 273 }
 274
 275 static void
 276 usage(void)
 277 {
 278         fprintf(stderr, ""
 279             "usbconfig - configure the USB subsystem" "\n"
 280             "usage: usbconfig -u <busnum> -a <devaddr> -i <ifaceindex> [cmds...]" "\n"
 281             "usage: usbconfig -d [ugen]<busnum>.<devaddr> -i <ifaceindex> [cmds...]" "\n"
 282             "commands:" "\n"
 283             "  set_config <cfg_index>" "\n"
 284             "  set_alt <alt_index>" "\n"
 285             "  set_template <template>" "\n"
 286             "  get_template" "\n"
 287             "  add_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
 288             "  remove_dev_quirk_vplh <vid> <pid> <lo_rev> <hi_rev> <quirk>" "\n"
 289             "  add_quirk <quirk>" "\n"
 290             "  remove_quirk <quirk>" "\n"
 291             "  detach_kernel_driver" "\n"
 292             "  dump_quirk_names" "\n"
 293             "  dump_device_quirks" "\n"
 294             "  dump_all_desc" "\n"
 295             "  dump_device_desc" "\n"
 296             "  dump_curr_config_desc" "\n"
 297             "  dump_all_config_desc" "\n"
 298             "  dump_string <index>" "\n"
 299             "  dump_info" "\n"
 300             "  dump_stats" "\n"
 301             "  show_ifdrv" "\n"
 302             "  suspend" "\n"
 303             "  resume" "\n"
 304             "  power_off" "\n"
 305             "  power_save" "\n"
 306             "  power_on" "\n"
 307             "  reset" "\n"
 308             "  list" "\n"
 309             "  do_request <bmReqTyp> <bReq> <wVal> <wIdx> <wLen> <data...>" "\n"
 310         );
 311         exit(1);
 312 }
 313
 314 static void
 315 reset_options(struct options *opt)
 316 {
 317         if (opt->buffer)
 318                 free(opt->buffer);
 319         memset(opt, 0, sizeof(*opt));
 320         return;
 321 }
 322
 323 static void
 324 flush_command(struct libusb20_backend *pbe, struct options *opt)
 325 {
 326         struct libusb20_device *pdev = NULL;
 327         uint32_t matches = 0;
 328         uint8_t dump_any;
 329
 330         /* check for invalid option combinations */
 331         if ((opt->got_suspend +
 332             opt->got_resume +
 333             opt->got_reset +
 334             opt->got_set_config +
 335             opt->got_set_alt +
 336             opt->got_power_save +
 337             opt->got_power_on +
 338             opt->got_power_off) > 1) {
 339                 err(1, "can only specify one of 'set_config', "
 340                     "'set_alt', 'reset', 'suspend', 'resume', "
 341                     "'power_save', 'power_on' and 'power_off' "
 342                     "at the same time!");
 343         }
 344         if (opt->got_dump_quirk_names) {
 345                 opt->got_any--;
 346                 dump_be_quirk_names(pbe);
 347         }
 348         if (opt->got_dump_device_quirks) {
 349                 opt->got_any--;
 350                 dump_be_dev_quirks(pbe);
 351         }
 352         if (opt->got_remove_device_quirk) {
 353                 opt->got_any--;
 354                 be_dev_remove_quirk(pbe,
 355                     opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
 356         }
 357         if (opt->got_add_device_quirk) {
 358                 opt->got_any--;
 359                 be_dev_add_quirk(pbe,
 360                     opt->vid, opt->pid, opt->lo_rev, opt->hi_rev, opt->quirkname);
 361         }
 362         if (opt->got_set_template) {
 363                 opt->got_any--;
 364                 if (libusb20_be_set_template(pbe, opt->template)) {
 365                         fprintf(stderr, "Setting USB template %u failed, "
 366                             "continuing.\n", opt->template);
 367                 }
 368         }
 369         if (opt->got_get_template) {
 370                 opt->got_any--;
 371                 if (libusb20_be_get_template(pbe, &opt->template))
 372                         printf("USB template: <unknown>\n");
 373                 else
 374                         printf("USB template: %u\n", opt->template);
 375         }
 376         if (opt->got_any == 0) {
 377                 /*
 378                  * do not scan through all the devices if there are no valid
 379                  * options
 380                  */
 381                 goto done;
 382         }
 383         while ((pdev = libusb20_be_device_foreach(pbe, pdev))) {
 384
 385                 if (opt->got_bus &&
 386                     (libusb20_dev_get_bus_number(pdev) != opt->bus)) {
 387                         continue;
 388                 }
 389                 if (opt->got_addr &&
 390                     (libusb20_dev_get_address(pdev) != opt->addr)) {
 391                         continue;
 392                 }
 393                 matches++;
 394
 395                 if (opt->got_remove_quirk) {
 396                         struct LIBUSB20_DEVICE_DESC_DECODED *ddesc;
 397
 398                         ddesc = libusb20_dev_get_device_desc(pdev);
 399
 400                         be_dev_remove_quirk(pbe,
 401                             ddesc->idVendor, ddesc->idProduct,
 402                             ddesc->bcdDevice, ddesc->bcdDevice,
 403                             opt->quirkname);
 404                 }
 405
 406                 if (opt->got_add_quirk) {
 407                         struct LIBUSB20_DEVICE_DESC_DECODED *ddesc;
 408
 409                         ddesc = libusb20_dev_get_device_desc(pdev);
 410
 411                         be_dev_add_quirk(pbe,
 412                             ddesc->idVendor, ddesc->idProduct,
 413                             ddesc->bcdDevice, ddesc->bcdDevice,
 414                             opt->quirkname);
 415                 }
 416
 417                 if (libusb20_dev_open(pdev, 0)) {
 418                         err(1, "could not open device");
 419                 }
 420                 if (opt->got_dump_string) {
 421                         dump_string_by_index(pdev, opt->string_index);
 422                 }
 423                 if (opt->got_do_request) {
 424                         uint16_t actlen;
 425                         uint16_t t;
 426
 427                         if (libusb20_dev_request_sync(pdev, &opt->setup,
 428                             opt->buffer, &actlen, 5000 /* 5 seconds */ , 0)) {
 429                                 printf("REQUEST = <ERROR>\n");
 430                         } else if (!(opt->setup.bmRequestType &
 431                             LIBUSB20_ENDPOINT_IN)) {
 432                                 printf("REQUEST = <OK>\n");
 433                         } else {
 434                                 t = actlen;
 435                                 printf("REQUEST = <");
 436                                 for (t = 0; t != actlen; t++) {
 437                                         printf("0x%02x%s",
 438                                             ((uint8_t *)opt->buffer)[t],
 439                                             (t == (actlen - 1)) ? "" : " ");
 440                                 }
 441                                 printf("><");
 442                                 for (t = 0; t != actlen; t++) {
 443                                         char c;
 444
 445                                         c = ((uint8_t *)opt->buffer)[t];
 446                                         if ((c != '<') &&
 447                                             (c != '>') && isprint(c)) {
 448                                                 putchar(c);
 449                                         }
 450                                 }
 451                                 printf(">\n");
 452                         }
 453                 }
 454                 if (opt->got_set_config) {
 455                         if (libusb20_dev_set_config_index(pdev,
 456                             opt->config_index)) {
 457                                 err(1, "could not set config index");
 458                         }
 459                 }
 460                 if (opt->got_set_alt) {
 461                         if (libusb20_dev_set_alt_index(pdev, opt->iface,
 462                             opt->alt_index)) {
 463                                 err(1, "could not set alternate setting");
 464                         }
 465                 }
 466                 if (opt->got_reset) {
 467                         if (libusb20_dev_reset(pdev)) {
 468                                 err(1, "could not reset device");
 469                         }
 470                 }
 471                 if (opt->got_suspend) {
 472                         if (libusb20_dev_set_power_mode(pdev,
 473                             LIBUSB20_POWER_SUSPEND)) {
 474                                 err(1, "could not set suspend");
 475                         }
 476                 }
 477                 if (opt->got_resume) {
 478                         if (libusb20_dev_set_power_mode(pdev,
 479                             LIBUSB20_POWER_RESUME)) {
 480                                 err(1, "could not set resume");
 481                         }
 482                 }
 483                 if (opt->got_power_off) {
 484                         if (libusb20_dev_set_power_mode(pdev,
 485                             LIBUSB20_POWER_OFF)) {
 486                                 err(1, "could not set power OFF");
 487                         }
 488                 }
 489                 if (opt->got_power_save) {
 490                         if (libusb20_dev_set_power_mode(pdev,
 491                             LIBUSB20_POWER_SAVE)) {
 492                                 err(1, "could not set power SAVE");
 493                         }
 494                 }
 495                 if (opt->got_power_on) {
 496                         if (libusb20_dev_set_power_mode(pdev,
 497                             LIBUSB20_POWER_ON)) {
 498                                 err(1, "could not set power ON");
 499                         }
 500                 }
 501                 if (opt->got_detach_kernel_driver) {
 502                         if (libusb20_dev_detach_kernel_driver(pdev, opt->iface)) {
 503                                 err(1, "could not detach kernel driver");
 504                         }
 505                 }
 506                 dump_any =
 507                     (opt->got_dump_all_desc ||
 508                     opt->got_dump_device_desc ||
 509                     opt->got_dump_curr_config ||
 510                     opt->got_dump_all_config ||
 511                     opt->got_dump_info ||
 512                     opt->got_dump_stats);
 513
 514                 if (opt->got_list || dump_any) {
 515                         dump_device_info(pdev,
 516                             opt->got_show_iface_driver);
 517                 }
 518                 if (opt->got_dump_device_desc) {
 519                         printf("\n");
 520                         dump_device_desc(pdev);
 521                 }
 522                 if (opt->got_dump_all_config) {
 523                         printf("\n");
 524                         dump_config(pdev, 1);
 525                 } else if (opt->got_dump_curr_config) {
 526                         printf("\n");
 527                         dump_config(pdev, 0);
 528                 } else if (opt->got_dump_all_desc) {
 529                         printf("\n");
 530                         dump_device_desc(pdev);
 531                         dump_config(pdev, 1);
 532                 }
 533                 if (opt->got_dump_stats) {
 534                         printf("\n");
 535                         dump_device_stats(pdev);
 536                 }
 537                 if (dump_any) {
 538                         printf("\n");
 539                 }
 540                 if (libusb20_dev_close(pdev)) {
 541                         err(1, "could not close device");
 542                 }
 543         }
 544
 545         if (matches == 0) {
 546                 printf("No device match or lack of permissions.\n");
 547         }
 548 done:
 549         reset_options(opt);
 550
 551         return;
 552 }
 553
 554 int
 555 main(int argc, char **argv)
 556 {
 557         struct libusb20_backend *pbe;
 558         struct options *opt = &options;
 559         const char *ptr;
 560         int unit;
 561         int addr;
 562         int n;
 563         int t;
 564
 565         if (argc < 1) {
 566                 usage();
 567         }
 568         pbe = libusb20_be_alloc_default();
 569         if (pbe == NULL)
 570                 err(1, "could not access USB backend\n");
 571
 572         for (n = 1; n != argc; n++) {
 573
 574                 /* get number of additional options */
 575                 t = (argc - n - 1);
 576                 if (t > 255)
 577                         t = 255;
 578                 switch (get_token(argv[n], t)) {
 579                 case T_ADD_QUIRK:
 580                         if (opt->got_add_quirk) {
 581                                 flush_command(pbe, opt);
 582                         }
 583                         opt->quirkname = argv[n + 1];
 584                         n++;
 585
 586                         opt->got_add_quirk = 1;
 587                         opt->got_any++;
 588                         break;
 589
 590                 case T_REMOVE_QUIRK:
 591                         if (opt->got_remove_quirk) {
 592                                 flush_command(pbe, opt);
 593                         }
 594                         opt->quirkname = argv[n + 1];
 595                         n++;
 596
 597                         opt->got_remove_quirk = 1;
 598                         opt->got_any++;
 599                         break;
 600
 601                 case T_ADD_DEVICE_QUIRK:
 602                         if (opt->got_add_device_quirk) {
 603                                 flush_command(pbe, opt);
 604                         }
 605                         opt->vid = num_id(argv[n + 1], "Vendor ID");
 606                         opt->pid = num_id(argv[n + 2], "Product ID");
 607                         opt->lo_rev = num_id(argv[n + 3], "Low Revision");
 608                         opt->hi_rev = num_id(argv[n + 4], "High Revision");
 609                         opt->quirkname = argv[n + 5];
 610                         n += 5;
 611
 612                         opt->got_add_device_quirk = 1;
 613                         opt->got_any++;
 614                         break;
 615
 616                 case T_REMOVE_DEVICE_QUIRK:
 617                         if (opt->got_remove_device_quirk) {
 618                                 flush_command(pbe, opt);
 619                         }
 620                         opt->vid = num_id(argv[n + 1], "Vendor ID");
 621                         opt->pid = num_id(argv[n + 2], "Product ID");
 622                         opt->lo_rev = num_id(argv[n + 3], "Low Revision");
 623                         opt->hi_rev = num_id(argv[n + 4], "High Revision");
 624                         opt->quirkname = argv[n + 5];
 625                         n += 5;
 626                         opt->got_remove_device_quirk = 1;
 627                         opt->got_any++;
 628                         break;
 629
 630                 case T_DETACH_KERNEL_DRIVER:
 631                         if (opt->got_detach_kernel_driver)
 632                                 duplicate_option(argv[n]);
 633                         opt->got_detach_kernel_driver = 1;
 634                         opt->got_any++;
 635                         break;
 636
 637                 case T_DUMP_QUIRK_NAMES:
 638                         if (opt->got_dump_quirk_names)
 639                                 duplicate_option(argv[n]);
 640                         opt->got_dump_quirk_names = 1;
 641                         opt->got_any++;
 642                         break;
 643
 644                 case T_DUMP_DEVICE_QUIRKS:
 645                         if (opt->got_dump_device_quirks)
 646                                 duplicate_option(argv[n]);
 647                         opt->got_dump_device_quirks = 1;
 648                         opt->got_any++;
 649                         break;
 650
 651                 case T_SHOW_IFACE_DRIVER:
 652                         opt->got_show_iface_driver = 1;
 653                         break;
 654
 655                 case T_UGEN:
 656                         if (opt->got_any) {
 657                                 /* allow multiple commands on the same line */
 658                                 flush_command(pbe, opt);
 659                         }
 660                         ptr = argv[n + 1];
 661
 662                         if ((ptr[0] == 'u') &&
 663                             (ptr[1] == 'g') &&
 664                             (ptr[2] == 'e') &&
 665                             (ptr[3] == 'n'))
 666                                 ptr += 4;
 667
 668                         if ((sscanf(ptr, "%d.%d",
 669                             &unit, &addr) != 2) ||
 670                             (unit < 0) || (unit > 65535) ||
 671                             (addr < 0) || (addr > 65535)) {
 672                                 errx(1, "cannot "
 673                                     "parse '%s'", argv[n + 1]);
 674                         }
 675                         opt->bus = unit;
 676                         opt->addr = addr;
 677                         opt->got_bus = 1;
 678                         opt->got_addr = 1;
 679                         n++;
 680                         break;
 681
 682                 case T_UNIT:
 683                         if (opt->got_any) {
 684                                 /* allow multiple commands on the same line */
 685                                 flush_command(pbe, opt);
 686                         }
 687                         opt->bus = num_id(argv[n + 1], "busnum");
 688                         opt->got_bus = 1;
 689                         n++;
 690                         break;
 691                 case T_ADDR:
 692                         opt->addr = num_id(argv[n + 1], "addr");
 693                         opt->got_addr = 1;
 694                         n++;
 695                         break;
 696                 case T_IFACE:
 697                         opt->iface = num_id(argv[n + 1], "iface");
 698                         opt->got_iface = 1;
 699                         n++;
 700                         break;
 701                 case T_SET_CONFIG:
 702                         if (opt->got_set_config)
 703                                 duplicate_option(argv[n]);
 704                         opt->config_index = num_id(argv[n + 1], "cfg_index");
 705                         opt->got_set_config = 1;
 706                         opt->got_any++;
 707                         n++;
 708                         break;
 709                 case T_SET_ALT:
 710                         if (opt->got_set_alt)
 711                                 duplicate_option(argv[n]);
 712                         opt->alt_index = num_id(argv[n + 1], "cfg_index");
 713                         opt->got_set_alt = 1;
 714                         opt->got_any++;
 715                         n++;
 716                         break;
 717                 case T_SET_TEMPLATE:
 718                         if (opt->got_set_template)
 719                                 duplicate_option(argv[n]);
 720                         opt->template = get_int(argv[n + 1]);
 721                         opt->got_set_template = 1;
 722                         opt->got_any++;
 723                         n++;
 724                         break;
 725                 case T_GET_TEMPLATE:
 726                         if (opt->got_get_template)
 727                                 duplicate_option(argv[n]);
 728                         opt->got_get_template = 1;
 729                         opt->got_any++;
 730                         break;
 731                 case T_DUMP_ALL_DESC:
 732                         if (opt->got_dump_all_desc)
 733                                 duplicate_option(argv[n]);
 734                         opt->got_dump_all_desc = 1;
 735                         opt->got_any++;
 736                         break;
 737                 case T_DUMP_DEVICE_DESC:
 738                         if (opt->got_dump_device_desc)
 739                                 duplicate_option(argv[n]);
 740                         opt->got_dump_device_desc = 1;
 741                         opt->got_any++;
 742                         break;
 743                 case T_DUMP_CURR_CONFIG_DESC:
 744                         if (opt->got_dump_curr_config)
 745                                 duplicate_option(argv[n]);
 746                         opt->got_dump_curr_config = 1;
 747                         opt->got_any++;
 748                         break;
 749                 case T_DUMP_ALL_CONFIG_DESC:
 750                         if (opt->got_dump_all_config)
 751                                 duplicate_option(argv[n]);
 752                         opt->got_dump_all_config = 1;
 753                         opt->got_any++;
 754                         break;
 755                 case T_DUMP_INFO:
 756                         if (opt->got_dump_info)
 757                                 duplicate_option(argv[n]);
 758                         opt->got_dump_info = 1;
 759                         opt->got_any++;
 760                         break;
 761                 case T_DUMP_STATS:
 762                         if (opt->got_dump_stats)
 763                                 duplicate_option(argv[n]);
 764                         opt->got_dump_stats = 1;
 765                         opt->got_any++;
 766                         break;
 767                 case T_DUMP_STRING:
 768                         if (opt->got_dump_string)
 769                                 duplicate_option(argv[n]);
 770                         opt->string_index = num_id(argv[n + 1], "str_index");
 771                         opt->got_dump_string = 1;
 772                         opt->got_any++;
 773                         n++;
 774                         break;
 775                 case T_SUSPEND:
 776                         if (opt->got_suspend)
 777                                 duplicate_option(argv[n]);
 778                         opt->got_suspend = 1;
 779                         opt->got_any++;
 780                         break;
 781                 case T_RESUME:
 782                         if (opt->got_resume)
 783                                 duplicate_option(argv[n]);
 784                         opt->got_resume = 1;
 785                         opt->got_any++;
 786                         break;
 787                 case T_POWER_OFF:
 788                         if (opt->got_power_off)
 789                                 duplicate_option(argv[n]);
 790                         opt->got_power_off = 1;
 791                         opt->got_any++;
 792                         break;
 793                 case T_POWER_SAVE:
 794                         if (opt->got_power_save)
 795                                 duplicate_option(argv[n]);
 796                         opt->got_power_save = 1;
 797                         opt->got_any++;
 798                         break;
 799                 case T_POWER_ON:
 800                         if (opt->got_power_on)
 801                                 duplicate_option(argv[n]);
 802                         opt->got_power_on = 1;
 803                         opt->got_any++;
 804                         break;
 805                 case T_RESET:
 806                         if (opt->got_reset)
 807                                 duplicate_option(argv[n]);
 808                         opt->got_reset = 1;
 809                         opt->got_any++;
 810                         break;
 811                 case T_LIST:
 812                         if (opt->got_list)
 813                                 duplicate_option(argv[n]);
 814                         opt->got_list = 1;
 815                         opt->got_any++;
 816                         break;
 817                 case T_DO_REQUEST:
 818                         if (opt->got_do_request)
 819                                 duplicate_option(argv[n]);
 820                         LIBUSB20_INIT(LIBUSB20_CONTROL_SETUP, &opt->setup);
 821                         opt->setup.bmRequestType = num_id(argv[n + 1], "bmReqTyp");
 822                         opt->setup.bRequest = num_id(argv[n + 2], "bReq");
 823                         opt->setup.wValue = num_id(argv[n + 3], "wVal");
 824                         opt->setup.wIndex = num_id(argv[n + 4], "wIndex");
 825                         opt->setup.wLength = num_id(argv[n + 5], "wLen");
 826                         if (opt->setup.wLength != 0) {
 827                                 opt->buffer = malloc(opt->setup.wLength);
 828                         } else {
 829                                 opt->buffer = NULL;
 830                         }
 831
 832                         n += 5;
 833
 834                         if (!(opt->setup.bmRequestType &
 835                             LIBUSB20_ENDPOINT_IN)) {
 836                                 /* copy in data */
 837                                 t = (argc - n - 1);
 838                                 if (t < opt->setup.wLength) {
 839                                         err(1, "request data missing");
 840                                 }
 841                                 t = opt->setup.wLength;
 842                                 while (t--) {
 843                                         ((uint8_t *)opt->buffer)[t] =
 844                                             num_id(argv[n + t + 1], "req_data");
 845                                 }
 846                                 n += opt->setup.wLength;
 847                         }
 848                         opt->got_do_request = 1;
 849                         opt->got_any++;
 850                         break;
 851                 default:
 852                         if (n == 1) {
 853                                 ptr = argv[n];
 854
 855                                 if ((ptr[0] == 'u') &&
 856                                     (ptr[1] == 'g') &&
 857                                     (ptr[2] == 'e') &&
 858                                     (ptr[3] == 'n'))
 859                                         ptr += 4;
 860
 861                                 if ((sscanf(ptr, "%d.%d",
 862                                     &unit, &addr) != 2) ||
 863                                     (unit < 0) || (unit > 65535) ||
 864                                     (addr < 0) || (addr > 65535)) {
 865                                         usage();
 866                                         break;
 867                                 }
 868
 869                                 opt->bus = unit;
 870                                 opt->addr = addr;
 871                                 opt->got_bus = 1;
 872                                 opt->got_addr = 1;
 873                                 break;
 874                         }
 875                         usage();
 876                         break;
 877                 }
 878         }
 879         if (opt->got_any) {
 880                 /* flush out last command */
 881                 flush_command(pbe, opt);
 882         } else {
 883                 /* list all the devices */
 884                 opt->got_list = 1;
 885                 opt->got_any++;
 886                 flush_command(pbe, opt);
 887         }
 888         /* release data */
 889         libusb20_be_free(pbe);
 890
 891         return (0);
 892 }