tuexen [Fri, 22 Aug 2014 20:26:20 +0000 (20:26 +0000)]
MFC r269945:
Add support for the SCTP_PR_STREAM_STATUS and SCTP_PR_ASSOC_STATUS
socket options. This includes managing the correspoing stat counters.
Add the SCTP_DETAILED_STR_STATS kernel option to control per policy
counters on every stream. The default is off and only an aggregated
counter is available. This is sufficient for the RTCWeb usecase.
tuexen [Fri, 22 Aug 2014 20:08:50 +0000 (20:08 +0000)]
MFC r269481:
Add support for the SCTP_PKTDROP_SUPPORTED socket option and
the corresponding sysctl variable.
The default is off, since the specification is not an RFC yet.
tuexen [Fri, 22 Aug 2014 20:05:09 +0000 (20:05 +0000)]
MFC r269475:
Add SCTP socket option SCTP_NRSACK_SUPPORTED to control the
NRSACK extension. The default will still be off, since it
it not an RFC (yet).
Changing the sysctl name will be in a separate commit.
tuexen [Fri, 22 Aug 2014 20:01:35 +0000 (20:01 +0000)]
MFC r269448:
Add support for the SCTP_PR_SUPPORTED socket option as specified in
http://tools.ietf.org/html/draft-ietf-tsvwg-sctp-prpolicies
Add also a sysctl controlling the default of the end-points.
tuexen [Fri, 22 Aug 2014 19:57:39 +0000 (19:57 +0000)]
MFC r269436, r269445:
Cleanup the ECN configuration handling and provide an SCTP socket
option for controlling ECN on future associations and get the
status on current associations.
A simialar pattern will be used for controlling SCTP extensions in
upcoming commits.
tuexen [Fri, 22 Aug 2014 19:40:29 +0000 (19:40 +0000)]
MFC r268534:
Bugfix: When a remote address was added to an endpoint,
a source address was selected and cached, but it was not
stored that is was cached. This resulted in selecting
different source addresses for the INIT-ACK and COOKIE-ACK
when possible.
Thanks to Niu Zhixiong for reporting the issue.
emaste [Fri, 22 Aug 2014 18:09:06 +0000 (18:09 +0000)]
MFC r263822: amd64: Parse the EFI memory map if present
With this change (and loader.efi from [HEAD]) we can now boot under
qemu using the OVMF UEFI firmware image with the limitation that a
serial console is required.
bryanv [Fri, 22 Aug 2014 15:12:20 +0000 (15:12 +0000)]
MFC r268481:
Rework when the Tx queue completion interrupt is enabled
The Tx interrupt is now kept disabled in the common case, only
enabled when the number of free descriptors in the queue falls
below a threshold. Transmitted frames are cleared from the VQ
before subsequent transmit, or in the watchdog timer.
This was a very big performance improvement for an experimental
Netmap bhyve backend.
kib [Fri, 22 Aug 2014 07:09:54 +0000 (07:09 +0000)]
MFC r269708:
Unlock ldvp and lock dvp to compensate for possible ldvp unlock in lower
VOP_LOOKUP() and dvp reclamation. Use cached value of dvp->v_mount.
gjb [Fri, 22 Aug 2014 00:54:00 +0000 (00:54 +0000)]
Use 'WITHOUT_TESTS=1' instead of 'MK_TESTS=no' in the
'distribute' target of etc/Makefile, because we do not
allow command-line use of 'make MK_TESTS=no' in stable/10.
This fixes a regression introduced in r270187 that causes
the release build to fail, and a direct commit to stable/10.
smh [Thu, 21 Aug 2014 22:44:08 +0000 (22:44 +0000)]
MFC r265152 - Reintroduce priority for the TRIM ZIOs instead of using the "NOW" priority
MFC r265321 - Fix double fault panic when returning EOPNOTSUPP
MFC r269407 - Don't return ZIO_PIPELINE_CONTINUE from vdev_op_io_start methods
Add fonts converted from SYSCONS with help of tools/tools/vt/keymaps
for use with NEWCONS. The mapping from SYSCONS name to NEWCONS name
is documented in KBDFILES.map in the tools directory.
A few of the files where modified by Ed Maste (ca.kbd, ca-fr.kbd).
se [Thu, 21 Aug 2014 21:53:43 +0000 (21:53 +0000)]
MFC 270131, 270152, 270199, 270232:
Add converter from SYSCONS keymap format to NEWCONS and
configuration files. The convert-keymap.pl script can
be used to convert private SYSCONS keymaps ro NEWCONS
format.
ian [Thu, 21 Aug 2014 21:36:06 +0000 (21:36 +0000)]
This module requires pci_if.h, add it to the SRCS list.
We haven't noticed that it was missing because eisa has been disabled for
a while in -current, but it became apparent when some parallel-build stuff
was MFC'd to 10-stable and this module failed to build there.
np [Thu, 21 Aug 2014 19:54:02 +0000 (19:54 +0000)]
MFC r266571, r266757, r268536, r269076, r269364, r269366, r269411,
r269413, r269428, r269440, r269537, r269644, r269731, and the cxgbe
portion of r270063.
r266571:
cxgbe(4): Remove stray if_up from the code that creates the tracing ifnet.
r266757:
cxgbe(4): netmap support for Terminator 5 (T5) based 10G/40G cards.
Netmap gets its own hardware-assisted virtual interface and won't take
over or disrupt the "normal" interface in any way. You can use both
simultaneously.
For kernels with DEV_NETMAP, cxgbe(4) carves out an ncxl<N> interface
(note the 'n' prefix) in the hardware to accompany each cxl<N>
interface. These two ifnet's per port share the same wire but really
are separate interfaces in the hardware and software. Each gets its own
L2 MAC addresses (unicast and multicast), MTU, checksum caps, etc. You
should run netmap on the 'n' interfaces only, that's what they are for.
With this, pkt-gen is able to transmit > 45Mpps out of a single 40G port
of a T580 card. 2 port tx is at ~56Mpps total (28M + 28M) as of now.
Single port receive is at 33Mpps but this is very much a work in
progress. I expect it to be closer to 40Mpps once done. In any case
the current effort can already saturate multiple 10G ports of a T5 card
at the smallest legal packet size. T4 gear is totally untested.
trantor:~# ./pkt-gen -i ncxl0 -f tx -D 00:07:43:ab:cd:ef
881.952141 main [1621] interface is ncxl0
881.952250 extract_ip_range [275] range is 10.0.0.1:0 to 10.0.0.1:0
881.952253 extract_ip_range [275] range is 10.1.0.1:0 to 10.1.0.1:0
881.962540 main [1804] mapped 334980KB at 0x801dff000
Sending on netmap:ncxl0: 4 queues, 1 threads and 1 cpus.
10.0.0.1 -> 10.1.0.1 (00:00:00:00:00:00 -> 00:07:43:ab:cd:ef)
881.962562 main [1882] Sending 512 packets every 0.000000000 s
881.962563 main [1884] Wait 2 secs for phy reset
884.088516 main [1886] Ready...
884.088535 nm_open [457] overriding ifname ncxl0 ringid 0x0 flags 0x1
884.088607 sender_body [996] start
884.093246 sender_body [1064] drop copy
885.090435 main_thread [1418] 45206353 pps (45289533 pkts in 1001840 usec)
886.091600 main_thread [1418] 45322792 pps (45375593 pkts in 1001165 usec)
887.092435 main_thread [1418] 45313992 pps (45351784 pkts in 1000834 usec)
888.094434 main_thread [1418] 45315765 pps (45406397 pkts in 1002000 usec)
889.095434 main_thread [1418] 45333218 pps (45378551 pkts in 1001000 usec)
890.097434 main_thread [1418] 45315247 pps (45405877 pkts in 1002000 usec)
891.099434 main_thread [1418] 45326515 pps (45417168 pkts in 1002000 usec)
892.101434 main_thread [1418] 45333039 pps (45423705 pkts in 1002000 usec)
893.103434 main_thread [1418] 45324105 pps (45414708 pkts in 1001999 usec)
894.105434 main_thread [1418] 45318042 pps (45408723 pkts in 1002001 usec)
895.106434 main_thread [1418] 45332430 pps (45377762 pkts in 1001000 usec)
896.107434 main_thread [1418] 45338072 pps (45383410 pkts in 1001000 usec)
...
r268536:
cxgbe(4): Add an iSCSI softc to the adapter structure.
r269076:
Some hooks in cxgbe(4) for the offloaded iSCSI driver.
r269364:
Improve compliance with style.Makefile(5).
r269366:
List one file per line in the Makefiles. This makes it easier to read
diffs when a file is added or removed.
r269411:
cxgbe(4): minor optimizations in ingress queue processing.
Reorganize struct sge_iq. Make the iq entry size a compile time
constant. While here, eliminate RX_FL_ESIZE and use EQ_ESIZE directly.
r269413:
cxgbe(4): Fix an off by one error when looking for the BAR2 doorbell
address of an egress queue.
r269428:
cxgbe(4): some optimizations in freelist handling.
r269440:
cxgbe(4): Remove an unused version of t4_enable_vi.
r269537:
cxgbe(4): Do not run any sleepable code in the SIOCSIFFLAGS handler when
IFF_PROMISC or IFF_ALLMULTI is being flipped. bpf(4) holds its global
mutex around ifpromisc in at least the bpf_dtor path.
r269644:
cxgbe(4): Let caller specify whether it's ok to sleep in
t4_sched_config and t4_sched_params.
r269731:
cxgbe(4): Do not poke T4-only registers on a T5 (and vice versa).
Relnotes: Yes (native netmap support for Chelsio T4/T5 cards)
emaste [Thu, 21 Aug 2014 19:51:07 +0000 (19:51 +0000)]
MFC r263815, r263872:
Move ia64 efi.h to sys in preparation for amd64 UEFI support
Prototypes specific to ia64 have been left in this file for now, under
__ia64__, rather than moving them to a new header under sys/ia64.
I anticipate that (some of) the corresponding functions will be shared
by the amd64, arm64, i386, and ia64 architectures, and we can adjust
this as EFI support on other than ia64 continues to develop.
ian [Thu, 21 Aug 2014 17:18:21 +0000 (17:18 +0000)]
MFC r260401
Remove aicasm as a build dependency. It made sense when the ahc and ahd
drivers and their firmware were under active development, but those days
have passed. The firmware now exists in pre-compiled form, no longer
dependent on it's sources or on aicasm. If you wish to rebuild the
firmware from source, the glue still exists under the 'make firmware'
target in sys/modules/aic7xxx.
This also fixes the problem introduced with r257777 et al with building
kernels the old fashioned way in sys/$arch/compile/$CONFIG when the
ahc/ahd drivers were included.
Changes to how the aicasm tool is built. This series of changes results
in the aicasm tool being built as part of the tools stages of world and
kernel builds.
Most of these changes will ultimately be undone when r260401 is MFC'd,
but it will leave in place the new kernel-build-tool machinery (KTMAKE
stuff) in case a new special kernel tool ever comes along.
dumbbell [Thu, 21 Aug 2014 10:18:42 +0000 (10:18 +0000)]
vt(4): Colors are indexed against a console palette, not a VGA palette
Rename vt_generate_vga_palette() to vt_generate_cons_palette() and
change it to build a palette where the color index is the same than in
terminal escape codes, not the VGA index. That's what TCHAR_CREATE()
uses and passes to vt(4).
The main differences between both orders are:
o Blue and red are swapped (1 <-> 4)
o Yellow and cyan are swapped (3 <-> 6)
The problem remained unnoticed, because the RGB bit indexes passed to
vt_generate_vga_palette() were reversed. This inversion was cancelled
by the colors inversions in the generated palette. For instance, red
(0xff0000) and blue (0x0000ff) have bytes in opposite order, but were
swapped in the palette. But after changing the value of blue (see last
paragraph), the modified color was in fact the red one.
While here, tune the palette to better match console colors and improve
the readability (especially the dark blue).
peter [Thu, 21 Aug 2014 04:31:48 +0000 (04:31 +0000)]
MFC r270062: switch rpc mount protocol for showmount and umount from
mountv1 to mountv3 - it breaks by default on the new netapp release with
the legacy protocols removed.
slm [Wed, 20 Aug 2014 23:09:27 +0000 (23:09 +0000)]
MFC r269314 and r269316
r269314:
Bring in LSI's phase16 - phase18 changes
* Implements Start Stop Unit for SATA direct-attach devices in IR mode to avoid
data corruption.
* Use CAM_DEV_NOT_THERE instead of CAM_SEL_TIMEOUT and CAM_TID_INVALID
r269316:
Bring in LSI's phase19 changes
* Removed unused mpssas_discovery_timeout function.
* Don't alter mapping boundaries if not raid firmware.
* Check free_busaddr instead of post_busaddr (diff minimisation really)
loos [Wed, 20 Aug 2014 19:37:05 +0000 (19:37 +0000)]
MFC r267021:
FreeBSD, historically, has always used 8-bit addresses for i2c devices
(7-bit device address << 1), always leaving the room for the read/write
bit.
This commit convert ti_i2c and revert r259127 on bcm2835_bsc to make them
compatible with 8-bit addresses. Previous to this commit an i2c device
would have different addresses depending on the controller it was attached
to (by example, when compared to any iicbb(4) based i2c controller), which
was a pretty annoying behavior.
Also, update the PMIC i2c address on beaglebone* DTS files to match the
new address scheme.
Now the userland utilities need to do the correct slave address shifting
(but it is going to work with any i2c controller on the system).
Discussed with: ian
MFC r267834:
Clarify the expected usage of I2C 7-bit slave addresses on ioctl(2)
interface.
While here add the cross reference to iic(4) on iicbus(4).
asomers [Wed, 20 Aug 2014 19:30:58 +0000 (19:30 +0000)]
MFC devd-related changes
r270004
Convert devd's client socket to type SOCK_SEQPACKET.
This change consists of two merges from projects/zfsd/head along with the
addition of an ATF test case for the new functionality.
sbin/devd/tests/Makefile
sbin/devd/tests/client_test.c
Add ATF test cases for reading events from both devd socket types.
r266519:
sbin/devd/devd.8
sbin/devd/devd.cc
Create a new socket, of type SOCK_SEQPACKET, for communicating with
clients. SOCK_SEQPACKET sockets preserve record boundaries,
simplying code in the client. The old SOCK_STREAM socket is retained
for backwards-compatibility with existing clients.
r269993:
sbin/devd/devd.8
Fix grammar bug.
r270019 (from bz)
Remove bogus ; at the end of the if condition in order to unbreak gcc builds
after r270004.
loos [Wed, 20 Aug 2014 19:12:19 +0000 (19:12 +0000)]
MFC r266923:
Ignore IIC_ENOADDR from iicbus_reset() as it only means we have a
master-only controller.
This fixes the iic bus scan with i2c(8) (on supported controllers).
Tested with gpioiic(4).
MFC r267009:
Remove the unnecessary i2c slave address assignment.
The ti_i2c controller only works in the master mode and the i2c address
passed on iicbus_reset() is used to set the controller slave address when
operating as an i2c slave (which isn't currently supported).
When talking to a slave, the slave address is correctly provided to
ti_i2c_tranfer().
loos [Wed, 20 Aug 2014 17:57:23 +0000 (17:57 +0000)]
MFC r266937:
Export two new settings for the AM335x PWM, the clock prescaler (clkdiv)
and the actual PWM frequency.
Enforce the maximum value for the period sysctl.
The frequency systcl now allows the direct setting of the PWM frequency
(it will try to find the better clkdiv and period for a given frequency,
i.e. the ones that will give the better PWM resolution).
This allows the use lower frequencies on the PWM. Without changing the
clock prescaler the minimum PWM frequency was 1.52kHz.
loos [Wed, 20 Aug 2014 17:39:53 +0000 (17:39 +0000)]
MFC r266922:
Add a bounds verification to the SCL and SDA pin values.
At attach, print the SCL and SDA pin numbers.
Remove a stray blank line.
Remove the GPIOBUS locking from gpioiic_reset(), it is already called with
this lock held. This fixes a crash when you try to scan the iicbus with
i2c(8).
luigi [Wed, 20 Aug 2014 17:33:32 +0000 (17:33 +0000)]
MFC 259907 (dates back to december)
use the correct netmap <-> nic slot mapping on the transmit ring for 'lem'.
This bug would manifest only in netmap mode and on packets transmitted after
a NIC reset while netmap mode is active.
davide [Wed, 20 Aug 2014 17:26:05 +0000 (17:26 +0000)]
MFC r269502:
Fix an overflow in getsockopt(). optval isn't big enough to hold
sbintime_t.
Re-introduce r255030 behaviour capping socket timeouts to INT_32
if they're too large.
markj [Wed, 20 Aug 2014 14:57:55 +0000 (14:57 +0000)]
MFC r269524:
Preserve the errno value of an ioctl before calling free(3). Previously,
errno was very occasionally being clobbered, resulting in a bogus error from
dt_consume() and thus an error from dtrace(1).
ian [Tue, 19 Aug 2014 23:33:51 +0000 (23:33 +0000)]
MFC r266473,267331,267511:
Use an intermediate target to associate with _SUBDIR which is marked .MAKE
this allows make -n to do tree walks as expected without
doing anything else (as intended).
Use prefix _sub. to help avoid conflict with any real target.
Put the test suite in its own tests.txz distribution file.
Force all the contents of /usr/tests to go into a separate distribution
file so that users of binary releases can easily choose to not install
Create a mechanism for providing fine-grained build order dependencies
during SUBDIR_PARALLEL builds. This augments the coarse .WAIT mechanism,
which is still useful if you've got a situation such as "almost everything
depends on A and B".
grehan [Tue, 19 Aug 2014 23:15:47 +0000 (23:15 +0000)]
MFC r266103
Update dis_tables.c to the latest Illumos version.
This includes decodes of recent Intel instructions, in particular
VT-x and related instructions. This allows the FBT provider to
locate the exit points of routines that include these new
instructions.
Illumos issues:
3414 Need a new word of AT_SUN_HWCAP bits
3415 Add isainfo support for f16c and rdrand
3416 Need disassembler support for rdrand and f16c
3413 isainfo -v overflows 80 columns
3417 mdb disassembler confuses rdtscp for invlpg
1518 dis should support AMD SVM/AMD-V/Pacifica instructions
1096 i386 disassembler should understand complex nops
1362 add kvmstat for monitoring of KVM statistics
1363 add vmregs[] variable to DTrace
1364 need disassembler support for VMX instructions
1365 mdb needs 16-bit disassembler support
dumbbell [Tue, 19 Aug 2014 20:53:28 +0000 (20:53 +0000)]
vt(4): Add vtbuf_dirty*_locked() to lock vtbuf once, not twice
In several functions, vtbuf_putchar() in particular, the lock on vtbuf
is acquired twice:
1. once by the said functions;
2. once in vtbuf_dirty().
Now, vtbuf_dirty_locked() and vtbuf_dirty_cell_locked() allow to
acquire that lock only once.
This improves the input speed of vt(4). To measure the gain, a
50,000-lines file was displayed on the console using cat(1). The time
taken by cat(1) is reported below:
o On amd64, with vt_vga:
- before: 1.0"
- after: 0.5"
o On sparc64, with creator_vt:
- before: 13.6"
- after: 10.5"
Lightly tested with FreeBSD i386/amd64, Linux i386/amd64, and
OpenBSD/amd64. Still resolving an issue with OpenBSD/i386.
Many thanks to jhb@ for all the hard work on the prior MFCs !
r267921 - support the "mov r/m8, imm8" instruction
r267934 - document options
r267949 - set DMI vers/date to fixed values
r267959 - doc: sort cmd flags
r267966 - EPT misconf post-mortem info
r268202 - use correct flag for event index
r268276 - 64-bit virtio capability api
r268427 - invalidate guest TLB when cr3 is updated, needed for TSS
r268428 - identify vcpu's operating mode
r268521 - use correct offset in guest logical-to-linear translation
r268638 - chs value
r268639 - chs fake values
r268701 - instr emul operand/address size override prefix support
r268777 - emulation for legacy x86 task switching
r268889 - nested exception support
r268922 - fix INVARIANTS build
r269008 - emulate instructions found in the OpenBSD/i386 5.5 kernel
r269042 - fix fault injection
r269043 - Reduce VMEXIT_RESTARTs in task_switch.c
r269080 - fix issues in PUSH emulation
r269094 - simplify return values from the inout handlers
r269108 - don't return -1 from the push emulation handler
r269109 - avoid permanent sleep in vm_handle_hlt()
r269281 - list VT-x features in base kernel dmesg
r269317 - Mark AHCI fatal errors as not completed
r269700 - Support PCI extended config space in bhyve
r269896 - Minor cleanup
r269962 - use max guest memory when creating IOMMU domain
r269989 - fix interrupt mode names
mckusick [Mon, 18 Aug 2014 22:53:48 +0000 (22:53 +0000)]
MFC of 269533 (by mckusick):
Add support for multi-threading of soft updates.
Replace a single soft updates thread with a thread per FFS-filesystem
mount point. The threads are associated with the bufdaemon process.
Reviewed by: kib
Tested by: Peter Holm and Scott Long
MFC after: 2 weeks
Sponsored by: Netflix
MFC of 269853 (by kib):
Revision r269457 removed the Giant around mount and unmount code, but
r269533, which was tested before r269457 was committed, implicitely
relied on the Giant to protect the manipulations of the softdepmounts
list. Use softdep global lock consistently to guarantee the list
structure now.
Insert the new struct mount_softdeps into the softdepmounts only after
it is sufficiently initialized, to prevent softdep_speedup() from
accessing bare memory. Similarly, remove struct mount_softdeps for
the unmounted filesystem from the tailq before destroying structure
rwlock.
Reported and tested by: pho
Reviewed by: mckusick
Sponsored by: The FreeBSD Foundation
asomers [Mon, 18 Aug 2014 20:21:12 +0000 (20:21 +0000)]
MFC r269977
Skip pgrep-j and pkill-j if jail or jls is not installed.
Even though jail is part of the base system, it can be disabled by src.conf
settings. Therefore, it should be listed as a required program for tests that
use it.
projects / FreeBSD / stable / 10.git / log