2 .\" Copyright (c) 2013, Martin Matuska <mm@FreeBSD.org>.
3 .\" All Rights Reserved.
5 .\" The contents of this file are subject to the terms of the
6 .\" Common Development and Distribution License (the "License").
7 .\" You may not use this file except in compliance with the License.
9 .\" You can obtain a copy of the license at usr/src/OPENSOLARIS.LICENSE
10 .\" or http://www.opensolaris.org/os/licensing.
11 .\" See the License for the specific language governing permissions
12 .\" and limitations under the License.
14 .\" When distributing Covered Code, include this CDDL HEADER in each
15 .\" file and include the License file at usr/src/OPENSOLARIS.LICENSE.
16 .\" If applicable, add the following below this CDDL HEADER, with the
17 .\" fields enclosed by brackets "[]" replaced with your own identifying
18 .\" information: Portions Copyright [yyyy] [name of copyright owner]
20 .\" Copyright (c) 2010, Sun Microsystems, Inc. All Rights Reserved.
21 .\" Copyright (c) 2012 by Delphix. All rights reserved.
22 .\" Copyright (c) 2011, Pawel Jakub Dawidek <pjd@FreeBSD.org>
23 .\" Copyright (c) 2012, Glen Barber <gjb@FreeBSD.org>
24 .\" Copyright (c) 2013 by Saso Kiselkov. All rights reserved.
25 .\" Copyright (c) 2013 Nexenta Systems, Inc. All Rights Reserved.
26 .\" Copyright (c) 2013, Joyent, Inc. All rights reserved.
27 .\" Copyright (c) 2013, Steven Hartland <smh@FreeBSD.org>
36 .Nd configures ZFS file systems
43 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ... Ar filesystem
48 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
54 .Ar filesystem Ns | Ns Ar volume
64 .Cm snapshot Ns | Ns Cm snap
66 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
67 .Ar filesystem@snapname Ns | Ns Ar volume@snapname
68 .Ar filesystem@snapname Ns | Ns Ar volume@snapname Ns ...
76 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
77 .Ar snapshot filesystem Ns | Ns Ar volume
84 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
85 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
90 .Ar filesystem Ns | Ns Ar volume
91 .Ar filesystem Ns | Ns Ar volume
100 .Ar filesystem filesystem
103 .Op Fl r Ns | Ns Fl d Ar depth
105 .Op Fl o Ar property Ns Oo , Ns property Ns Oc Ns ...
106 .Op Fl t Ar type Ns Oo , Ns type Ns Oc Ns ...
107 .Oo Fl s Ar property Oc Ns ...
108 .Oo Fl S Ar property Oc Ns ...
109 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
112 .Ar property Ns = Ns Ar value
113 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot Ns ...
116 .Op Fl r Ns | Ns Fl d Ar depth
118 .Op Fl o Ar all | field Ns Oo , Ns Ar field Oc Ns ...
119 .Op Fl t Ar type Ns Oo Ns , Ar type Oc Ns ...
120 .Op Fl s Ar source Ns Oo Ns , Ns Ar source Oc Ns ...
121 .Ar all | property Ns Oo Ns , Ns Ar property Oc Ns ...
122 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot Ns ...
127 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot Ns ...
135 .Fl a | Ar filesystem
139 .Op Fl o Ar field Ns Oo , Ns Ar field Oc Ns ...
140 .Oo Fl s Ar field Oc Ns ...
141 .Oo Fl S Ar field Oc Ns ...
142 .Op Fl t Ar type Ns Oo Ns , Ns Ar type Oc Ns ...
143 .Ar filesystem Ns | Ns Ar snapshot
147 .Op Fl o Ar field Ns Oo , Ns field Oc Ns ...
148 .Oo Fl s Ar field Oc Ns ...
149 .Oo Fl S Ar field Oc Ns ...
150 .Op Fl t Ar type Ns Oo Ns , Ns Ar type Oc Ns ...
151 .Ar filesystem Ns | Ns Ar snapshot
157 .Op Fl o Ar property Ns Oo , Ns Ar property Oc Ns ...
158 .Fl a | Ar filesystem
160 .Cm unmount Ns | Ns Cm umount
162 .Fl a | Ar filesystem Ns | Ns Ar mountpoint
165 .Fl a | Ar filesystem
168 .Fl a | Ar filesystem Ns | Ns Ar mountpoint
172 .Op Fl i Ar snapshot | Fl I Ar snapshot
175 .Cm receive Ns | Ns Cm recv
177 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
179 .Cm receive Ns | Ns Cm recv
185 .Ar filesystem Ns | Ns Ar volume
189 .Ar user Ns | Ns Ar group Ns Oo Ns , Ns Ar user Ns | Ns Ar group Oc Ns ...
190 .Ar perm Ns | Ns Ar @setname Ns
191 .Oo Ns , Ns Ar perm Ns | Ns Ar @setname Oc Ns ...
192 .Ar filesystem Ns | Ns Ar volume
196 .Fl e Ns | Ns Cm everyone
197 .Ar perm Ns | Ns Ar @setname Ns Op Ns , Ns Ar perm Ns | Ns Ar @setname Ns
199 .Ar filesystem Ns | Ns Ar volume
203 .Ar perm Ns | Ns Ar @setname Ns Op Ns , Ns Ar perm Ns | Ns Ar @setname Ns
205 .Ar filesystem Ns | Ns Ar volume
210 .Ar perm Ns | Ns Ar @setname Ns Op Ns , Ns Ar perm Ns | Ns Ar @setname Ns
212 .Ar filesystem Ns | Ns Ar volume
216 .Ar user Ns | Ns Ar group Ns Oo Ns , Ns Ar user Ns | Ns Ar group Oc Ns ...
217 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
219 .Ar filesystem Ns | Ns Ar volume
223 .Fl e Ns | Ns Cm everyone
224 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
226 .Ar filesystem Ns | Ns Ar volume
231 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
233 .Ar filesystem Ns | Ns Ar volume
239 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
241 .Ar filesystem Ns | Ns Ar volume
245 .Ar tag snapshot Ns ...
253 .Ar tag snapshot Ns ...
258 .Op Ar snapshot Ns | Ns Ar filesystem
261 .Ar jailid Ns | Ns Ar jailname filesystem
264 .Ar jailid Ns | Ns Ar jailname filesystem
272 storage pool, as described in
274 A dataset is identified by a unique path within the
276 namespace. For example:
277 .Bd -ragged -offset 4n
278 .No pool/ Ns Brq filesystem,volume,snapshot
281 where the maximum length of a dataset name is
285 A dataset can be one of the following:
292 can be mounted within the standard system namespace and behaves like other file
295 file systems are designed to be
297 compliant, known issues exist that prevent compliance in some cases.
298 Applications that depend on standards conformance might fail due to nonstandard
299 behavior when checking file system free space.
301 A logical volume exported as a raw or block device. This type of dataset should
302 only be used under special circumstances. File systems are typically used in
305 A read-only version of a file system or volume at a given point in time. It is
311 .Ss ZFS File System Hierarchy
314 storage pool is a logical collection of devices that provide space for
315 datasets. A storage pool is also the root of the
317 file system hierarchy.
319 The root of the pool can be accessed as a file system, such as mounting and
320 unmounting, taking snapshots, and setting properties. The physical storage
321 characteristics, however, are managed by the
327 for more information on creating and administering pools.
329 A snapshot is a read-only copy of a file system or volume. Snapshots can be
330 created extremely quickly, and initially consume no additional space within the
331 pool. As data within the active dataset changes, the snapshot consumes more
332 data than would otherwise be shared with the active dataset.
334 Snapshots can have arbitrary names. Snapshots of volumes can be cloned or
335 rolled back, but cannot be accessed independently.
337 File system snapshots can be accessed under the
339 directory in the root of the file system. Snapshots are automatically mounted
340 on demand and may be unmounted at regular intervals. The visibility of the
342 directory can be controlled by the
346 A clone is a writable volume or file system whose initial contents are the same
347 as another dataset. As with snapshots, creating a clone is nearly
348 instantaneous, and initially consumes no additional space.
350 Clones can only be created from a snapshot. When a snapshot is cloned, it
351 creates an implicit dependency between the parent and child. Even though the
352 clone is created somewhere else in the dataset hierarchy, the original snapshot
353 cannot be destroyed as long as a clone exists. The
355 property exposes this dependency, and the
357 command lists any such dependencies, if they exist.
359 The clone parent-child dependency relationship can be reversed by using the
361 subcommand. This causes the "origin" file system to become a clone of the
362 specified file system, which makes it possible to destroy the file system that
363 the clone was created from.
367 file system is a simple operation, so the number of file systems per system is
368 likely to be numerous. To cope with this,
370 automatically manages mounting and unmounting file systems without the need to
373 file. All automatically managed file systems are mounted by
377 By default, file systems are mounted under
381 is the name of the file system in the
383 namespace. Directories are created and destroyed as needed.
385 A file system can also have a mount point set in the
387 property. This directory is created as needed, and
389 automatically mounts the file system when the
391 command is invoked (without editing
395 property can be inherited, so if
401 automatically inherits a mount point of
408 prevents the file system from being mounted.
412 file systems can also be managed with traditional tools
413 .Pq Xr mount 8 , Xr umount 8 , Xr fstab 5 .
414 If a file system's mount point is set to
417 makes no attempt to manage the file system, and the administrator is
418 responsible for mounting and unmounting the file system.
421 dataset can be attached to a jail by using the
423 subcommand. You cannot attach a dataset to one jail and the children of the
424 same dataset to another jails. To allow management of the dataset from within
427 property has to be set. The
429 property cannot be changed from within a jail.
432 dataset can be detached from a jail using the
436 After a dataset is attached to a jail and the jailed property is set, a jailed
437 file system cannot be mounted outside the jail, since the jail administrator
438 might have set the mount point to an unacceptable value.
440 Deduplication is the process for removing redundant data at the block-level,
441 reducing the total amount of data stored. If a file system has the
443 property enabled, duplicate data blocks are removed synchronously. The result
444 is that only unique data is stored and common components are shared among
446 .Ss Native Properties
447 Properties are divided into two types, native properties and user-defined (or
448 "user") properties. Native properties either export internal statistics or
451 behavior. In addition, native properties are either editable or read-only. User
452 properties have no effect on
454 behavior, but you can use them to annotate datasets in a way that is meaningful
455 in your environment. For more information about user properties, see the
456 .Qq Sx User Properties
459 Every dataset has a set of properties that export statistics about the dataset
460 as well as control various behaviors. Properties are inherited from the parent
461 unless overridden by the child. Some properties apply only to certain types of
462 datasets (file systems, volumes, or snapshots).
464 The values of numeric properties can be specified using human-readable suffixes
466 .Sy k , KB , M , Gb ,
469 for zettabyte). The following are all valid (and equal) specifications:
470 .Bd -ragged -offset 4n
474 The values of non-numeric properties are case sensitive and must be lowercase,
476 .Sy mountpoint , sharenfs , No and Sy sharesmb .
478 The following native properties consist of read-only statistics about the
479 dataset. These properties can be neither set, nor inherited. Native properties
480 apply to all dataset types unless otherwise noted.
483 The amount of space available to the dataset and all its children, assuming
484 that there is no other activity in the pool. Because space is shared within a
485 pool, availability can be limited by any number of factors, including physical
486 pool size, quotas, reservations, or other datasets within the pool.
488 This property can also be referred to by its shortened column name,
491 For non-snapshots, the compression ratio achieved for the
493 space of this dataset, expressed as a multiplier. The
495 property includes descendant datasets, and, for clones, does not include
496 the space shared with the origin snapshot. For snapshots, the
500 property. Compression can be turned on by running:
501 .Qq Nm Cm set compression=on Ar dataset
505 The time this dataset was created.
507 For snapshots, this property is a comma-separated list of filesystems or
508 volumes which are clones of this snapshot. The clones'
510 property is this snapshot. If the
512 property is not empty, then this snapshot can not be destroyed (even with the
520 if the snapshot has been marked for deferred destroy by using the
522 command. Otherwise, the property is
524 .It Sy logicalreferenced
525 The amount of space that is
527 accessible by this dataset.
531 The logical space ignores the effect of the
535 properties, giving a quantity closer to the amount of data that applications
537 However, it does include space consumed by metadata.
539 This property can also be referred to by its shortened column name,
542 The amount of space that is
544 consumed by this dataset and all its descendents.
548 The logical space ignores the effect of the
552 properties, giving a quantity closer to the amount of data that applications
555 This property can also be referred to by its shortened column name,
558 For file systems, indicates whether the file system is currently mounted. This
559 property can be either
564 For cloned file systems or volumes, the snapshot from which the clone was
565 created. See also the
569 The amount of data that is accessible by this dataset, which may or may not be
570 shared with other datasets in the pool. When a snapshot or clone is created, it
571 initially references the same amount of space as the file system or snapshot it
572 was created from, since its contents are identical.
574 This property can also be referred to by its shortened column name,
576 .It Sy refcompressratio
577 The compression ratio achieved for the
579 space of this dataset, expressed as a multiplier. See also the
584 .Sy filesystem , volume , No or Sy snapshot .
586 The amount of space consumed by this dataset and all its descendents. This is
587 the value that is checked against this dataset's quota and reservation. The
588 space used does not include this dataset's reservation, but does take into
589 account the reservations of any descendent datasets. The amount of space that a
590 dataset consumes from its parent, as well as the amount of space that are freed
591 if this dataset is recursively destroyed, is the greater of its space used and
594 When snapshots (see the
596 section) are created, their space is
597 initially shared between the snapshot and the file system, and possibly with
598 previous snapshots. As the file system changes, space that was previously
599 shared becomes unique to the snapshot, and counted in the snapshot's space
600 used. Additionally, deleting snapshots can increase the amount of space unique
601 to (and used by) other snapshots.
603 The amount of space used, available, or referenced does not take into account
604 pending changes. Pending changes are generally accounted for within a few
605 seconds. Committing a change to a disk using
609 does not necessarily guarantee that the space usage information is updated
614 properties decompose the
616 properties into the various reasons that space is used. Specifically,
618 .Sy usedbysnapshots + usedbydataset + usedbychildren + usedbyrefreservation .
619 These properties are only available for datasets created
622 pool version 13 pools and higher.
623 .It Sy usedbysnapshots
624 The amount of space consumed by snapshots of this dataset. In particular, it is
625 the amount of space that would be freed if all of this dataset's snapshots were
626 destroyed. Note that this is not simply the sum of the snapshots'
628 properties because space can be shared by multiple snapshots.
630 The amount of space used by this dataset itself, which would be freed if the
631 dataset were destroyed (after first removing any
633 and destroying any necessary snapshots or descendents).
634 .It Sy usedbychildren
635 The amount of space used by children of this dataset, which would be freed if
636 all the dataset's children were destroyed.
637 .It Sy usedbyrefreservation
638 The amount of space used by a
640 set on this dataset, which would be freed if the
643 .It Sy userused@ Ns Ar user
644 The amount of space consumed by the specified user in this dataset. Space is
645 charged to the owner of each file, as displayed by
647 The amount of space charged is displayed by
653 subcommand for more information.
655 Unprivileged users can access only their own space usage. The root user, or a
656 user who has been granted the
660 can access everyone's usage.
664 properties are not displayed by
666 The user's name must be appended after the
668 symbol, using one of the following forms:
669 .Bl -bullet -offset 2n
671 POSIX name (for example,
674 POSIX numeric ID (for example,
678 This property is set to the number of user holds on this snapshot. User holds
682 .It Sy groupused@ Ns Ar group
683 The amount of space consumed by the specified group in this dataset. Space is
684 charged to the group of each file, as displayed by
687 .Sy userused@ Ns Ar user
688 property for more information.
690 Unprivileged users can only access their own groups' space usage. The root
691 user, or a user who has been granted the
695 can access all groups' usage.
696 .It Sy volblocksize Ns = Ns Ar blocksize
697 For volumes, specifies the block size of the volume. The
699 cannot be changed once the volume has been written, so it should be set at
700 volume creation time. The default
702 for volumes is 8 Kbytes. Any
703 power of 2 from 512 bytes to 128 Kbytes is valid.
705 This property can also be referred to by its shortened column name,
710 space written to this dataset since the previous snapshot.
711 .It Sy written@ Ns Ar snapshot
714 space written to this dataset since the specified snapshot. This is the space
715 that is referenced by this dataset but was not referenced by the specified
720 may be specified as a short snapshot name (just the part after the
722 in which case it will be interpreted as a snapshot in the same filesystem as
725 may be a full snapshot name
726 .Pq Em filesystem@snapshot ,
727 which for clones may be a snapshot in the origin's filesystem (or the origin of
728 the origin's filesystem, etc).
731 The following native properties can be used to change the behavior of a
736 .Sy aclinherit Ns = Ns Cm discard |
744 entries are inherited when files and directories are created. A file system
751 entries. A file system with an
755 only inherits inheritable
757 entries that specify "deny" permissions. The property value
759 (the default) removes the
765 entry is inherited. A file system with an
769 inherits all inheritable
771 entries without any modifications made to the
773 entries when they are inherited. A file system with an
777 has the same meaning as
780 .Em owner@ , group@ , No and Em everyone@ Tn ACE Ns s
781 inherit the execute permission only if the file creation mode also requests the
784 When the property value is set to
786 files are created with a mode determined by the inheritable
790 exist that affect the mode, then the mode is set in accordance to the requested
791 mode from the application.
792 .It Sy aclmode Ns = Ns Cm discard | groupmask | passthrough | restricted
797 A file system with an
801 (the default) deletes all
803 entries that do not represent the mode of the file. An
807 reduces permissions granted in all
811 such that they are no greater than the group permissions specified by
813 A file system with an
817 indicates that no changes are made to the
819 other than creating or updating the necessary
821 entries to represent the new mode of the file or directory.
828 operation to return an error when used on any file or directory which has
831 whose entries can not be represented by a mode.
833 is required to change the set user ID, set group ID, or sticky bits on a file
834 or directory, as they do not have equivalent
839 on a file or directory with a non-trivial
845 you must first remove all
847 entries which do not represent the current mode.
848 .It Sy atime Ns = Ns Cm on | off
849 Controls whether the access time for files is updated when they are read.
850 Turning this property off avoids producing write traffic when reading files and
851 can result in significant performance gains, though it might confuse mailers
852 and other similar utilities. The default value is
854 .It Sy canmount Ns = Ns Cm on | off | noauto
855 If this property is set to
857 the file system cannot be mounted, and is ignored by
858 .Qq Nm Cm mount Fl a .
859 Setting this property to
861 is similar to setting the
865 except that the dataset still has a normal
867 property, which can be inherited. Setting this property to
869 allows datasets to be used solely as a mechanism to inherit properties. One
871 .Sy canmount Ns = Ns Cm off
872 is to have two datasets with the same
874 so that the children of both datasets appear in the same directory, but might
875 have different inherited characteristics.
879 value is set, a dataset can only be mounted and unmounted explicitly. The
880 dataset is not mounted automatically when the dataset is created or imported,
881 nor is it mounted by the
883 command or unmounted by the
884 .Qq Nm Cm umount Fl a
887 This property is not inherited.
888 .It Sy checksum Ns = Ns Cm on | off | fletcher2 | fletcher4 | sha256 | noparity
889 Controls the checksum used to verify data integrity. The default value is
891 which automatically selects an appropriate algorithm (currently,
893 but this may change in future releases). The value
895 disables integrity checking on user data.
899 disables integrity but also disables maintaining parity for user data. This
900 setting is used internally by a dump device residing on a RAID-Z pool and should
901 not be used by any other dataset.
902 Disabling checksums is
904 a recommended practice.
905 .It Sy compression Ns = Ns Cm on | off | lzjb | gzip | gzip- Ns Ar N | zle | Cm lz4
906 Controls the compression algorithm used for this dataset. The
908 compression algorithm is optimized for performance while providing decent data
909 compression. Setting compression to
913 compression algorithm. The
915 compression algorithm uses the same compression as the
917 command. You can specify the
919 level by using the value
923 is an integer from 1 (fastest) to 9 (best compression ratio). Currently,
927 (which is also the default for
931 compression algorithm compresses runs of zeros.
935 compression algorithm is a high-performance replacement
938 algorithm. It features significantly faster
939 compression and decompression, as well as a moderately higher
940 compression ratio than
942 but can only be used on pools with
949 for details on ZFS feature flags and the
953 This property can also be referred to by its shortened column name
955 Changing this property affects only newly-written data.
956 .It Sy copies Ns = Ns Cm 1 | 2 | 3
957 Controls the number of copies of data stored for this dataset. These copies are
958 in addition to any redundancy provided by the pool, for example, mirroring or
959 RAID-Z. The copies are stored on different disks, if possible. The space used
960 by multiple copies is charged to the associated file and dataset, changing the
962 property and counting against quotas and reservations.
964 Changing this property only affects newly-written data. Therefore, set this
965 property at file system creation time by using the
966 .Fl o Cm copies= Ns Ar N
968 .It Sy dedup Ns = Ns Cm on | off | verify | sha256 Ns Op Cm ,verify
969 Configures deduplication for a dataset. The default value is
971 The default deduplication checksum is
973 (this may change in the future).
976 is enabled, the checksum defined here overrides the
978 property. Setting the value to
980 has the same effect as the setting
986 will do a byte-to-byte comparsion in case of two blocks having the same
987 signature to make sure the block contents are identical.
988 .It Sy devices Ns = Ns Cm on | off
991 property is currently not supported on
993 .It Sy exec Ns = Ns Cm on | off
994 Controls whether processes can be executed from within this file system. The
997 .It Sy mlslabel Ns = Ns Ar label | Cm none
1000 property is currently not supported on
1002 .It Sy mountpoint Ns = Ns Ar path | Cm none | legacy
1003 Controls the mount point used for this file system. See the
1005 section for more information on how this property is used.
1009 property is changed for a file system, the file system and any children that
1010 inherit the mount point are unmounted. If the new value is
1012 then they remain unmounted. Otherwise, they are automatically remounted in the
1013 new location if the property was previously
1017 or if they were mounted before the property was changed. In addition, any
1018 shared file systems are unshared and shared in the new location.
1019 .It Sy nbmand Ns = Ns Cm on | off
1022 property is currently not supported on
1024 .It Sy primarycache Ns = Ns Cm all | none | metadata
1025 Controls what is cached in the primary cache (ARC). If this property is set to
1027 then both user data and metadata is cached. If this property is set to
1029 then neither user data nor metadata is cached. If this property is set to
1031 then only metadata is cached. The default value is
1033 .It Sy quota Ns = Ns Ar size | Cm none
1034 Limits the amount of space a dataset and its descendents can consume. This
1035 property enforces a hard limit on the amount of space used. This includes all
1036 space consumed by descendents, including file systems and snapshots. Setting a
1037 quota on a descendent of a dataset that already has a quota does not override
1038 the ancestor's quota, but rather imposes an additional limit.
1040 Quotas cannot be set on volumes, as the
1042 property acts as an implicit quota.
1043 .It Sy userquota@ Ns Ar user Ns = Ns Ar size | Cm none
1044 Limits the amount of space consumed by the specified user.
1049 space calculation does not include space that is used by descendent datasets,
1050 such as snapshots and clones. User space consumption is identified by the
1051 .Sy userspace@ Ns Ar user
1054 Enforcement of user quotas may be delayed by several seconds. This delay means
1055 that a user might exceed their quota before the system notices that they are
1056 over quota and begins to refuse additional writes with the
1058 error message. See the
1060 subcommand for more information.
1062 Unprivileged users can only access their own groups' space usage. The root
1063 user, or a user who has been granted the
1067 can get and set everyone's quota.
1069 This property is not available on volumes, on file systems before version 4, or
1070 on pools before version 15. The
1071 .Sy userquota@ Ns ...
1072 properties are not displayed by
1074 The user's name must be appended after the
1076 symbol, using one of the following forms:
1077 .Bl -bullet -offset 2n
1079 POSIX name (for example,
1082 POSIX numeric ID (for example,
1085 .It Sy groupquota@ Ns Ar group Ns = Ns Ar size | Cm none
1086 Limits the amount of space consumed by the specified group. Group space
1087 consumption is identified by the
1088 .Sy userquota@ Ns Ar user
1091 Unprivileged users can access only their own groups' space usage. The root
1092 user, or a user who has been granted the
1096 can get and set all groups' quotas.
1097 .It Sy readonly Ns = Ns Cm on | off
1098 Controls whether this dataset can be modified. The default value is
1100 .It Sy recordsize Ns = Ns Ar size
1101 Specifies a suggested block size for files in the file system. This property is
1102 designed solely for use with database workloads that access files in fixed-size
1105 automatically tunes block sizes according to internal algorithms optimized for
1106 typical access patterns.
1108 For databases that create very large files but access them in small random
1109 chunks, these algorithms may be suboptimal. Specifying a
1111 greater than or equal to the record size of the database can result in
1112 significant performance gains. Use of this property for general purpose file
1113 systems is strongly discouraged, and may adversely affect performance.
1115 The size specified must be a power of two greater than or equal to 512 and less
1116 than or equal to 128 Kbytes.
1118 Changing the file system's
1120 affects only files created afterward; existing files are unaffected.
1122 This property can also be referred to by its shortened column name,
1124 .It Sy refquota Ns = Ns Ar size | Cm none
1125 Limits the amount of space a dataset can consume. This property enforces a hard
1126 limit on the amount of space used. This hard limit does not include space used
1127 by descendents, including file systems and snapshots.
1128 .It Sy refreservation Ns = Ns Ar size | Cm none
1129 The minimum amount of space guaranteed to a dataset, not including its
1130 descendents. When the amount of space used is below this value, the dataset is
1131 treated as if it were taking up the amount of space specified by
1132 .Sy refreservation .
1135 reservation is accounted for in the parent datasets' space used, and counts
1136 against the parent datasets' quotas and reservations.
1140 is set, a snapshot is only allowed if there is enough free pool space outside
1141 of this reservation to accommodate the current number of "referenced" bytes in
1144 This property can also be referred to by its shortened column name,
1146 .It Sy reservation Ns = Ns Ar size | Cm none
1147 The minimum amount of space guaranteed to a dataset and its descendents. When
1148 the amount of space used is below this value, the dataset is treated as if it
1149 were taking up the amount of space specified by its reservation. Reservations
1150 are accounted for in the parent datasets' space used, and count against the
1151 parent datasets' quotas and reservations.
1153 This property can also be referred to by its shortened column name,
1155 .It Sy secondarycache Ns = Ns Cm all | none | metadata
1156 Controls what is cached in the secondary cache (L2ARC). If this property is set
1159 then both user data and metadata is cached. If this property is set to
1161 then neither user data nor metadata is cached. If this property is set to
1163 then only metadata is cached. The default value is
1165 .It Sy setuid Ns = Ns Cm on | off
1166 Controls whether the
1168 bit is respected for the file system. The default value is
1170 .It Sy sharesmb Ns = Ns Cm on | off | Ar opts
1173 property currently has no effect on
1175 .It Sy sharenfs Ns = Ns Cm on | off | Ar opts
1176 Controls whether the file system is shared via
1178 and what options are used. A file system with a
1182 is managed the traditional way via
1184 Otherwise, the file system is automatically shared and unshared with the
1188 commands. If the property is set to
1192 export options are used. Otherwise,
1194 export options are equivalent to the contents of this property. The export
1195 options may be comma-separated. See
1197 for a list of valid options.
1201 property is changed for a dataset, the
1204 .It Sy logbias Ns = Ns Cm latency | throughput
1207 about handling of synchronous requests in this dataset.
1214 will use pool log devices (if configured) to handle the requests at low
1220 will not use configured pool log devices.
1222 will instead optimize synchronous operations for global pool throughput and
1223 efficient use of resources.
1224 .It Sy snapdir Ns = Ns Cm hidden | visible
1225 Controls whether the
1227 directory is hidden or visible in the root of the file system as discussed in
1230 section. The default value is
1232 .It Sy sync Ns = Ns Cm standard | always | disabled
1233 Controls the behavior of synchronous requests (e.g.
1235 O_DSYNC). This property accepts the following values:
1236 .Bl -tag -offset 4n -width 8n
1238 This is the POSIX specified behavior of ensuring all synchronous requests are
1239 written to stable storage and all devices are flushed to ensure data is not
1240 cached by device controllers (this is the default).
1242 All file system transactions are written and flushed before their system calls
1243 return. This has a large performance penalty.
1245 Disables synchronous requests. File system transactions are only committed to
1246 stable storage periodically. This option will give the highest performance.
1247 However, it is very dangerous as
1249 would be ignoring the synchronous transaction demands of applications such as
1252 Administrators should only use this option when the risks are understood.
1254 .It Sy volsize Ns = Ns Ar size
1255 For volumes, specifies the logical size of the volume. By default, creating a
1256 volume establishes a reservation of equal size. For storage pools with a
1257 version number of 9 or higher, a
1259 is set instead. Any changes to
1261 are reflected in an equivalent change to the reservation (or
1262 .Sy refreservation ) .
1265 can only be set to a multiple of
1269 The reservation is kept equal to the volume's logical size to prevent
1270 unexpected behavior for consumers. Without the reservation, the volume could
1271 run out of space, resulting in undefined behavior or data corruption, depending
1272 on how the volume is used. These effects can also occur when the volume size is
1273 changed while it is in use (particularly when shrinking the size). Extreme care
1274 should be used when adjusting the volume size.
1276 Though not recommended, a "sparse volume" (also known as "thin provisioning")
1277 can be created by specifying the
1280 .Qq Nm Cm create Fl V
1281 command, or by changing the reservation after the volume has been created. A
1282 "sparse volume" is a volume where the reservation is less then the volume size.
1283 Consequently, writes to a sparse volume can fail with
1285 when the pool is low on space. For a sparse volume, changes to
1287 are not reflected in the reservation.
1288 .It Sy vscan Ns = Ns Cm off | on
1291 property is currently not supported on
1293 .It Sy xattr Ns = Ns Cm off | on
1296 property is currently not supported on
1298 .It Sy jailed Ns = Ns Cm off | on
1299 Controls whether the dataset is managed from a jail. See the
1301 section for more information. The default value is
1305 The following three properties cannot be changed after the file system is
1306 created, and therefore, should be set when the file system is created. If the
1307 properties are not set with the
1311 commands, these properties are inherited from the parent dataset. If the parent
1312 dataset lacks these properties due to having been created prior to these
1313 features being supported, the new file system will have the default values for
1316 .It Sy casesensitivity Ns = Ns Cm sensitive | insensitive | mixed
1319 property is currently not supported on
1321 .It Sy normalization Ns = Ns Cm none | formC | formD | formKC | formKD
1322 Indicates whether the file system should perform a
1324 normalization of file names whenever two file names are compared, and which
1325 normalization algorithm should be used. File names are always stored
1326 unmodified, names are normalized as part of any comparison process. If this
1327 property is set to a legal value other than
1331 property was left unspecified, the
1333 property is automatically set to
1335 The default value of the
1339 This property cannot be changed after the file system is created.
1340 .It Sy utf8only Ns = Ns Cm on | off
1341 Indicates whether the file system should reject file names that include
1342 characters that are not present in the
1344 character code set. If this property is explicitly set to
1346 the normalization property must either not be explicitly set or be set to
1348 The default value for the
1352 This property cannot be changed after the file system is created.
1356 .Sy casesensitivity , normalization , No and Sy utf8only
1357 properties are also new permissions that can be assigned to non-privileged
1360 delegated administration feature.
1361 .Ss Temporary Mount Point Properties
1362 When a file system is mounted, either through
1364 for legacy mounts or the
1366 command for normal file systems, its mount options are set according to its
1367 properties. The correlation between properties and mount options is as follows:
1368 .Bl -column -offset 4n "PROPERTY" "MOUNT OPTION"
1369 .It PROPERTY MOUNT OPTION
1370 .It atime atime/noatime
1371 .It exec exec/noexec
1373 .It setuid suid/nosuid
1376 In addition, these options can be set on a per-mount basis using the
1378 option, without affecting the property that is stored on disk. The values
1379 specified on the command line override the values stored in the dataset. These
1380 properties are reported as "temporary" by the
1382 command. If the properties are changed while the dataset is mounted, the new
1383 setting overrides any temporary settings.
1385 In addition to the standard native properties,
1387 supports arbitrary user properties. User properties have no effect on
1389 behavior, but applications or administrators can use them to annotate datasets
1390 (file systems, volumes, and snapshots).
1392 User property names must contain a colon
1394 character to distinguish them from native properties. They may contain
1395 lowercase letters, numbers, and the following punctuation characters: colon
1403 The expected convention is that the property name is divided into two portions
1405 .Em module Ns Sy \&: Ns Em property ,
1406 but this namespace is not enforced by
1408 User property names can be at most 256 characters, and cannot begin with a dash
1411 When making programmatic use of user properties, it is strongly suggested to
1416 component of property names to reduce the chance that two
1417 independently-developed packages use the same property name for different
1418 purposes. Property names beginning with
1420 are reserved for use by Sun Microsystems.
1422 The values of user properties are arbitrary strings, are always inherited, and
1423 are never validated. All of the commands that operate on properties
1430 can be used to manipulate both native properties and user properties. Use the
1432 command to clear a user property. If the property is not defined in any parent
1433 dataset, it is removed entirely. Property values are limited to 1024
1436 All subcommands that modify state are logged persistently to the pool in their
1444 Displays a help message.
1449 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
1455 file system. The file system is automatically mounted according to the
1457 property inherited from the parent.
1458 .Bl -tag -width indent
1460 Creates all the non-existing parent datasets. Datasets created in this manner
1461 are automatically mounted according to the
1463 property inherited from their parent. Any property specified on the command
1466 option is ignored. If the target filesystem already exists, the operation
1467 completes successfully.
1468 .It Fl o Ar property Ns = Ns Ar value
1469 Sets the specified property as if the command
1470 .Qq Nm Cm set Ar property Ns = Ns Ar value
1471 was invoked at the same time the dataset was created. Any editable
1473 property can also be set at creation time. Multiple
1475 options can be specified. An error results if the same property is specified in
1484 .Op Fl b Ar blocksize
1485 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
1490 Creates a volume of the given size. The volume is exported as a block device in
1491 .Pa /dev/zvol/path ,
1494 is the name of the volume in the
1496 namespace. The size represents the logical size as exported by the device. By
1497 default, a reservation of equal size is created.
1500 is automatically rounded up to the nearest 128 Kbytes to ensure that
1501 the volume has an integral number of blocks regardless of
1503 .Bl -tag -width indent
1505 Creates all the non-existing parent datasets. Datasets created in this manner
1506 are automatically mounted according to the
1508 property inherited from their parent. Any property specified on the command
1511 option is ignored. If the target filesystem already exists, the operation
1512 completes successfully.
1514 Creates a sparse volume with no reservation. See
1517 .Qq Sx Native Properties
1518 section for more information about sparse volumes.
1519 .It Fl b Ar blocksize
1521 .Fl o Cm volblocksize Ns = Ns Ar blocksize .
1522 If this option is specified in conjunction with
1523 .Fl o Cm volblocksize ,
1524 the resulting behavior is undefined.
1525 .It Fl o Ar property Ns = Ns Ar value
1526 Sets the specified property as if the
1527 .Qq Nm Cm set Ar property Ns = Ns Ar value
1528 command was invoked at the same time the dataset was created. Any editable
1530 property can also be set at creation time. Multiple
1532 options can be specified. An error results if the same property is specified in
1541 .Ar filesystem Ns | Ns Ar volume
1544 Destroys the given dataset. By default, the command unshares any file systems
1545 that are currently shared, unmounts any file systems that are currently
1546 mounted, and refuses to destroy a dataset that has active dependents (children
1548 .Bl -tag -width indent
1550 Recursively destroy all children.
1552 Recursively destroy all dependents, including cloned file systems outside the
1555 Force an unmount of any file systems using the
1556 .Qq Nm Cm unmount Fl f
1557 command. This option has no effect on non-file systems or unmounted file
1560 Do a dry-run ("No-op") deletion. No data will be deleted. This is useful in
1561 conjunction with the
1565 flags to determine what data would be deleted.
1567 Print machine-parsable verbose information about the deleted data.
1569 Print verbose information about the deleted data.
1572 Extreme care should be taken when applying either the
1576 options, as they can destroy large portions of a pool and cause unexpected
1577 behavior for mounted file systems in use.
1584 .Op % Ns Ar snapname
1589 The given snapshots are destroyed immediately if and only if the
1593 option would have destroyed it. Such immediate destruction would occur, for
1594 example, if the snapshot had no clones and the user-initiated reference count
1597 If a snapshot does not qualify for immediate destruction, it is marked for
1598 deferred deletion. In this state, it exists as a usable, visible snapshot until
1599 both of the preconditions listed above are met, at which point it is destroyed.
1601 An inclusive range of snapshots may be specified by separating the
1602 first and last snapshots with a percent sign
1604 The first and/or last snapshots may be left blank, in which case the
1605 filesystem's oldest or newest snapshot will be implied.
1608 (or ranges of snapshots) of the same filesystem or volume may be specified
1609 in a comma-separated list of snapshots.
1610 Only the snapshot's short name (the
1613 should be specified when using a range or comma-separated list to identify
1615 .Bl -tag -width indent
1617 Destroy (or mark for deferred deletion) all snapshots with this name in
1618 descendent file systems.
1620 Recursively destroy all clones of these snapshots, including the clones,
1621 snapshots, and children.
1622 If this flag is specified, the
1624 flag will have no effect.
1626 Do a dry-run ("No-op") deletion. No data will be deleted. This is useful in
1627 conjunction with the
1631 flags to determine what data would be deleted.
1633 Print machine-parsable verbose information about the deleted data.
1635 Print verbose information about the deleted data.
1637 Defer snapshot deletion.
1640 Extreme care should be taken when applying either the
1644 options, as they can destroy large portions of a pool and cause unexpected
1645 behavior for mounted file systems in use.
1648 .Cm snapshot Ns | Ns Cm snap
1650 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
1651 .Ar filesystem@snapname Ns | Ns volume@snapname
1652 .Ar filesystem@snapname Ns | Ns volume@snapname Ns ...
1655 Creates snapshots with the given names. All previous modifications by
1656 successful system calls to the file system are part of the snapshots.
1657 Snapshots are taken atomically, so that all snapshots correspond to the same
1658 moment in time. See the
1660 section for details.
1661 .Bl -tag -width indent
1663 Recursively create snapshots of all descendent datasets
1664 .It Fl o Ar property Ns = Ns Ar value
1665 Sets the specified property; see
1676 Roll back the given dataset to a previous snapshot. When a dataset is rolled
1677 back, all data that has changed since the snapshot is discarded, and the
1678 dataset reverts to the state at the time of the snapshot. By default, the
1679 command refuses to roll back to a snapshot other than the most recent one. In
1680 order to do so, all intermediate snapshots must be destroyed by specifying the
1683 .Bl -tag -width indent
1685 Recursively destroy any snapshots more recent than the one specified.
1687 Recursively destroy any more recent snapshots, as well as any clones of those
1692 option to force an unmount of any clone file systems that are to be destroyed.
1698 .Oo Fl o Ar property Ns = Ns Ar value Oc Ns ...
1699 .Ar snapshot filesystem Ns | Ns Ar volume
1702 Creates a clone of the given snapshot. See the
1704 section for details. The target dataset can be located anywhere in the
1706 hierarchy, and is created as the same type as the original.
1707 .Bl -tag -width indent
1709 Creates all the non-existing parent datasets. Datasets created in this manner
1710 are automatically mounted according to the
1712 property inherited from their parent. If the target filesystem or volume
1713 already exists, the operation completes successfully.
1714 .It Fl o Ar property Ns = Ns Ar value
1715 Sets the specified property; see
1722 .Ar clone-filesystem
1725 Promotes a clone file system to no longer be dependent on its "origin"
1726 snapshot. This makes it possible to destroy the file system that the clone was
1727 created from. The clone parent-child dependency relationship is reversed, so
1728 that the origin file system becomes a clone of the specified file system.
1730 The snapshot that was cloned, and any snapshots previous to this snapshot, are
1731 now owned by the promoted clone. The space they use moves from the origin file
1732 system to the promoted clone, so enough space must be available to accommodate
1733 these snapshots. No new space is consumed by this operation, but the space
1734 accounting is adjusted. The promoted clone must not have any conflicting
1735 snapshot names of its own. The
1737 subcommand can be used to rename any conflicting snapshots.
1742 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
1743 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
1750 .Ar filesystem Ns | Ns Ar volume
1751 .Ar filesystem Ns | Ns Ar volume
1758 .Ar filesystem filesystem
1761 Renames the given dataset. The new target can be located anywhere in the
1763 hierarchy, with the exception of snapshots. Snapshots can only be renamed
1764 within the parent file system or volume. When renaming a snapshot, the parent
1765 file system of the snapshot does not need to be specified as part of the second
1766 argument. Renamed file systems can inherit new mount points, in which case they
1767 are unmounted and remounted at the new mount point.
1768 .Bl -tag -width indent
1770 Creates all the nonexistent parent datasets. Datasets created in this manner
1771 are automatically mounted according to the
1773 property inherited from their parent.
1775 Do not remount file systems during rename. If a file system's
1781 file system is not unmounted even if this option is not given.
1783 Force unmount any filesystems that need to be unmounted in the process.
1784 This flag has no effect if used together with the
1792 .Ar snapshot snapshot
1795 Recursively rename the snapshots of all descendent datasets. Snapshots are the
1796 only dataset that can be renamed recursively.
1800 .Op Fl r Ns | Ns Fl d Ar depth
1802 .Op Fl o Ar property Ns Oo , Ns Ar property Oc Ns ...
1803 .Op Fl t Ar type Ns Oo , Ns Ar type Oc Ns ...
1804 .Oo Fl s Ar property Oc Ns ...
1805 .Oo Fl S Ar property Oc Ns ...
1806 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot Ns ...
1809 Lists the property information for the given datasets in tabular form. If
1810 specified, you can list property information by the absolute pathname or the
1811 relative pathname. By default, all file systems and volumes are displayed.
1812 Snapshots are displayed if the
1818 The following fields are displayed,
1819 .Sy name , used , available , referenced , mountpoint .
1820 .Bl -tag -width indent
1822 Recursively display any children of the dataset on the command line.
1824 Recursively display any children of the dataset, limiting the recursion to
1828 will display only the dataset and its direct children.
1830 Used for scripting mode. Do not print headers and separate fields by a single
1831 tab instead of arbitrary white space.
1832 .It Fl o Ar property Ns Oo , Ns Ar property Oc Ns ...
1833 A comma-separated list of properties to display. The property must be:
1834 .Bl -bullet -offset 2n
1836 One of the properties described in the
1837 .Qq Sx Native Properties
1844 to display the dataset name
1848 to display space usage properties on file systems and volumes. This is a
1849 shortcut for specifying
1851 .Sy name,avail,used,usedsnap,usedds,usedrefreserv,usedchild
1853 .Sy filesystem,volume
1856 .It Fl t Ar type Ns Oo , Ns Ar type Oc Ns ...
1857 A comma-separated list of types to display, where
1860 .Sy filesystem , snapshot , snap, volume , No or Sy all .
1861 For example, specifying
1863 displays only snapshots.
1864 .It Fl s Ar property
1865 A property for sorting the output by column in ascending order based on the
1866 value of the property. The property must be one of the properties described in
1869 section, or the special value
1871 to sort by the dataset name. Multiple properties can be specified at one time
1874 property options. Multiple
1876 options are evaluated from left to right in decreasing order of importance.
1878 The following is a list of sorting criteria:
1879 .Bl -bullet -offset 2n
1881 Numeric types sort in numeric order.
1883 String types sort in alphabetical order.
1885 Types inappropriate for a row sort that row to the literal bottom, regardless
1886 of the specified ordering.
1888 If no sorting options are specified the existing behavior of
1892 .It Fl S Ar property
1895 option, but sorts by property in descending order.
1900 .Ar property Ns = Ns Ar value
1901 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
1904 Sets the property to the given value for each dataset. Only some properties can
1905 be edited. See the "Properties" section for more information on what properties
1906 can be set and acceptable values. Numeric values can be specified as exact
1907 values, or in a human-readable form with a suffix of
1908 .Sy B , K , M , G , T , P , E , Z
1909 (for bytes, kilobytes, megabytes, gigabytes, terabytes, petabytes, exabytes, or
1910 zettabytes, respectively). User properties can be set on snapshots. For more
1911 information, see the
1912 .Qq Sx User Properties
1917 .Op Fl r Ns | Ns Fl d Ar depth
1919 .Op Fl o Ar all | field Ns Oo , Ns Ar field Oc Ns ...
1920 .Op Fl t Ar type Ns Oo , Ns Ar type Oc Ns ...
1921 .Op Fl s Ar source Ns Oo , Ns Ar source Oc Ns ...
1922 .Ar all | property Ns Oo , Ns Ar property Oc Ns ...
1923 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot Ns ...
1926 Displays properties for the given datasets. If no datasets are specified, then
1927 the command displays properties for all datasets on the system. For each
1928 property, the following columns are displayed:
1930 .Bl -hang -width "property" -offset indent -compact
1938 Property source. Can either be local, default, temporary, inherited, or none
1942 All columns except the
1944 column are displayed by default. The columns to display can be specified
1947 option. This command takes a comma-separated list of properties as described in
1949 .Qq Sx Native Properties
1951 .Qq Sx User Properties
1956 can be used to display all properties that apply to the given dataset's type
1957 (filesystem, volume, or snapshot).
1958 .Bl -tag -width indent
1960 Recursively display properties for any children.
1962 Recursively display any children of the dataset, limiting the recursion to
1966 will display only the dataset and its direct children.
1968 Display output in a form more easily parsed by scripts. Any headers are
1969 omitted, and fields are explicitly separated by a single tab instead of an
1970 arbitrary amount of space.
1972 Display numbers in parseable (exact) values.
1973 .It Fl o Cm all | Ar field Ns Oo , Ns Ar field Oc Ns ...
1974 A comma-separated list of columns to display. Supported values are
1975 .Sy name,property,value,received,source .
1977 .Sy name,property,value,source .
1980 specifies all columns.
1981 .It Fl t Ar type Ns Oo , Ns Ar type Oc Ns ...
1982 A comma-separated list of types to display, where
1985 .Sy filesystem , snapshot , volume , No or Sy all .
1986 For example, specifying
1988 displays only snapshots.
1989 .It Fl s Ar source Ns Oo , Ns Ar source Oc Ns ...
1990 A comma-separated list of sources to display. Those properties coming from a
1991 source other than those in this list are ignored. Each source must be one of
1993 .Sy local,default,inherited,temporary,received,none .
1994 The default value is all sources.
2001 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot Ns ...
2004 Clears the specified property, causing it to be inherited from an ancestor. If
2005 no ancestor has the property set, then the default value is used. See the
2007 section for a listing of default values, and details on which properties can be
2009 .Bl -tag -width indent
2011 Recursively inherit the given property for all children.
2013 For properties with a received value, revert to this value. This flag has no
2014 effect on properties that do not have a received value.
2022 Displays a list of file systems that are not the most recent version.
2023 .Bl -tag -width indent
2027 filesystem versions supported by the current software. The current
2029 filesystem version and all previous supported versions are displayed, along
2030 with an explanation of the features provided with each version.
2037 .Fl a | Ar filesystem
2040 Upgrades file systems to a new on-disk version. Once this is done, the file
2041 systems will no longer be accessible on systems running older versions of the
2044 streams generated from new snapshots of these file systems cannot be accessed
2045 on systems running older versions of the software.
2047 In general, the file system version is independent of the pool version. See
2049 for information on the
2050 .Nm zpool Cm upgrade
2053 In some cases, the file system version and the pool version are interrelated
2054 and the pool version must be upgraded before the file system version can be
2056 .Bl -tag -width indent
2058 Upgrade the specified file system and all descendent file systems.
2060 Upgrade to the specified
2064 flag is not specified, this command upgrades to the most recent version. This
2065 option can only be used to increase the version number, and only up to the most
2066 recent version supported by this software.
2068 Upgrade all file systems on all imported pools.
2070 Upgrade the specified file system.
2076 .Op Fl o Ar field Ns Oo , Ns Ar field Oc Ns ...
2077 .Oo Fl s Ar field Oc Ns ...
2078 .Oo Fl S Ar field Oc Ns ...
2079 .Op Fl t Ar type Ns Oo , Ns Ar type Oc Ns ...
2080 .Ar filesystem Ns | Ns Ar snapshot
2083 Displays space consumed by, and quotas on, each user in the specified
2084 filesystem or snapshot. This corresponds to the
2085 .Sy userused@ Ns Ar user
2087 .Sy userquota@ Ns Ar user
2089 .Bl -tag -width indent
2091 Print numeric ID instead of user/group name.
2093 Do not print headers, use tab-delimited output.
2095 Use exact (parsable) numeric output.
2096 .It Fl o Ar field Ns Oo , Ns Ar field Oc Ns ...
2097 Display only the specified fields from the following set:
2098 .Sy type,name,used,quota .
2099 The default is to display all fields.
2101 Sort output by this field. The
2105 flags may be specified multiple times to sort first by one field, then by
2106 another. The default is
2107 .Fl s Cm type Fl s Cm name .
2109 Sort by this field in reverse order. See
2111 .It Fl t Ar type Ns Oo , Ns Ar type Oc Ns ...
2112 Print only the specified types from the following set:
2113 .Sy all,posixuser,smbuser,posixgroup,smbgroup .
2116 .Fl t Cm posixuser,smbuser .
2118 The default can be changed to include group types.
2120 Translate SID to POSIX ID. This flag currently has no effect on
2127 .Op Fl o Ar field Ns Oo , Ns Ar field Oc Ns ...
2128 .Oo Fl s Ar field Oc Ns ...
2129 .Oo Fl S Ar field Oc Ns ...
2130 .Op Fl t Ar type Ns Oo , Ns Ar type Oc Ns ...
2131 .Ar filesystem Ns | Ns Ar snapshot
2134 Displays space consumed by, and quotas on, each group in the specified
2135 filesystem or snapshot. This subcommand is identical to
2136 .Qq Nm Cm userspace ,
2137 except that the default types to display are
2138 .Fl t Sy posixgroup,smbgroup .
2146 file systems currently mounted.
2147 .Bl -tag -width indent
2154 .Op Fl o Ar property Ns Oo , Ns Ar property Oc Ns ...
2155 .Fl a | Ar filesystem
2161 .Bl -tag -width indent
2163 Report mount progress.
2165 Perform an overlay mount. Overlay mounts are not supported on
2167 .It Fl o Ar property Ns Oo , Ns Ar property Oc Ns ...
2168 An optional, comma-separated list of mount options to use temporarily for the
2169 duration of the mount. See the
2170 .Qq Sx Temporary Mount Point Properties
2171 section for details.
2176 This command may be executed on
2180 For more information, see variable
2185 Mount the specified filesystem.
2189 .Cm unmount Ns | Ns Cm umount
2191 .Fl a | Ar filesystem Ns | Ns Ar mountpoint
2194 Unmounts currently mounted
2197 .Bl -tag -width indent
2199 Forcefully unmount the file system, even if it is currently in use.
2201 Unmount all available
2204 .It Ar filesystem | mountpoint
2205 Unmount the specified filesystem. The command can also be given a path to a
2207 file system mount point on the system.
2212 .Fl a | Ar filesystem
2217 file systems that have the
2220 .Bl -tag -width indent
2224 file systems that have the
2227 This command may be executed on
2231 For more information, see variable
2236 Share the specified filesystem according to the
2238 property. File systems are shared when the
2245 .Fl a | Ar filesystem Ns | Ns Ar mountpoint
2250 file systems that have the
2253 .Bl -tag -width indent
2257 file systems that have the
2260 This command may be executed on
2264 For more information, see variable
2268 .It Ar filesystem | mountpoint
2269 Unshare the specified filesystem. The command can also be given a path to a
2271 file system shared on the system.
2277 .Op Fl i Ar snapshot | Fl I Ar snapshot
2281 Creates a stream representation of the last
2283 argument (not part of
2287 which is written to standard output. The output can be redirected to
2288 a file or to a different system (for example, using
2290 By default, a full stream is generated.
2291 .Bl -tag -width indent
2292 .It Fl i Ar snapshot
2293 Generate an incremental stream from the
2297 The incremental source (the
2299 can be specified as the last component of the snapshot name (for example, the
2302 and it is assumed to be from the same file system as the last
2305 If the destination is a clone, the source may be the origin snapshot, which
2306 must be fully specified (for example,
2307 .Cm pool/fs@origin ,
2310 .It Fl I Ar snapshot
2311 Generate a stream package that sends all intermediary snapshots from the
2318 .Ic -i @a fs@b; -i @b fs@c; -i @c fs@d .
2319 The incremental source snapshot may be specified as with the
2323 Generate a replication stream package, which will replicate the specified
2324 filesystem, and all descendent file systems, up to the named snapshot. When
2325 received, all properties, snapshots, descendent file systems, and clones are
2332 flags are used in conjunction with the
2334 flag, an incremental replication stream is generated. The current values of
2335 properties, and current snapshot and file system names are set when the stream
2338 flag is specified when this stream is received, snapshots and file systems that
2339 do not exist on the sending side are destroyed.
2341 Generate a deduplicated stream. Blocks which would have been sent multiple
2342 times in the send stream will only be sent once. The receiving system must
2343 also support this feature to receive a deduplicated stream. This flag can
2344 be used regardless of the dataset's
2346 property, but performance will be much better if the filesystem uses a
2347 dedup-capable checksum (eg.
2350 Include the dataset's properties in the stream. This flag is implicit when
2352 is specified. The receiving system must also support this feature.
2354 Do a dry-run ("No-op") send. Do not generate any actual send data. This is
2355 useful in conjunction with the
2359 flags to determine what data will be sent.
2361 Print machine-parsable verbose information about the stream package generated.
2363 Print verbose information about the stream package generated.
2364 This information includes a per-second report of how much data has been sent.
2367 The format of the stream is committed. You will be able to receive your streams
2368 on future versions of
2372 .Cm receive Ns | Ns Cm recv
2374 .Ar filesystem Ns | Ns Ar volume Ns | Ns Ar snapshot
2378 .Cm receive Ns | Ns Cm recv
2384 Creates a snapshot whose contents are as specified in the stream provided on
2385 standard input. If a full stream is received, then a new file system is created
2386 as well. Streams are created using the
2388 subcommand, which by default creates a full stream.
2390 can be used as an alias for
2393 If an incremental stream is received, then the destination file system must
2394 already exist, and its most recent snapshot must match the incremental stream's
2397 the destination device link is destroyed and recreated, which means the
2399 cannot be accessed during the
2403 When a snapshot replication package stream that is generated by using the
2405 command is received, any snapshots that do not exist on the sending location
2406 are destroyed by using the
2407 .Qq Nm Cm destroy Fl d
2410 The name of the snapshot (and file system, if a full stream is received) that
2411 this subcommand creates depends on the argument type and the
2417 If the argument is a snapshot name, the specified
2419 is created. If the argument is a file system or volume name, a snapshot with
2420 the same name as the sent snapshot is created within the specified
2428 option is specified, the snapshot name is determined by appending the sent
2429 snapshot's name to the specified
2433 option is specified, all but the pool name of the sent snapshot path is
2434 appended (for example,
2436 appended from sent snapshot
2440 option is specified, only the tail of the sent snapshot path is appended (for
2443 appended from sent snapshot
2447 any file systems needed to replicate the path of the sent snapshot are created
2448 within the specified file system.
2449 .Bl -tag -width indent
2451 Use the full sent snapshot path without the first element (without pool name)
2452 to determine the name of the new snapshot as described in the paragraph above.
2454 Use only the last element of the sent snapshot path to determine the name of
2455 the new snapshot as described in the paragraph above.
2457 File system that is associated with the received stream is not mounted.
2459 Print verbose information about the stream and the time required to perform the
2462 Do not actually receive the stream. This can be useful in conjunction with the
2464 option to verify the name the receive operation would use.
2466 Force a rollback of the file system to the most recent snapshot before
2467 performing the receive operation. If receiving an incremental replication
2468 stream (for example, one generated by
2469 .Qq Nm Cm send Fl R Fi iI ) ,
2470 destroy snapshots and file systems that do not exist on the sending side.
2475 .Ar filesystem Ns | Ns Ar volume
2478 Displays permissions that have been delegated on the specified filesystem or
2479 volume. See the other forms of
2481 for more information.
2486 .Ar user Ns | Ns Ar group Ns Oo Ns , Ns Ar user Ns | Ns Ar group Oc Ns ...
2487 .Ar perm Ns | Ns Ar @setname Ns
2488 .Oo Ns , Ns Ar perm Ns | Ns Ar @setname Oc Ns ...
2489 .Ar filesystem Ns | Ns Ar volume
2495 .Fl e Ns | Ns Cm everyone
2496 .Ar perm Ns | Ns Ar @setname Ns Op Ns , Ns Ar perm Ns | Ns Ar @setname Ns
2498 .Ar filesystem Ns | Ns Ar volume
2503 administration permission for the file systems to non-privileged users.
2504 .Bl -tag -width indent
2507 .Ar user Ns | Ns Ar group Ns Oo , Ar user Ns | Ns Ar group Oc Ns ...
2509 Specifies to whom the permissions are delegated. Multiple entities can be
2510 specified as a comma-separated list. If neither of the
2512 options are specified, then the argument is interpreted preferentially as the
2515 then as a user name, and lastly as a group name. To specify
2516 a user or group named
2522 options. To specify a group with the same name as a user, use the
2525 .It Op Fl e Ns | Ns Cm everyone
2526 Specifies that the permissions be delegated to
2529 .Ar perm Ns | Ns Ar @setname Ns Oo , Ns Ar perm Ns | Ns Ar @setname Oc Ns ...
2531 The permissions to delegate. Multiple permissions
2532 may be specified as a comma-separated list. Permission names are the same as
2534 subcommand and property names. See the property list below. Property set names,
2535 which begin with an at sign
2537 may be specified. See the
2539 form below for details.
2542 .Ar filesystem Ns | Ns Ar volume
2544 Specifies where the permissions are delegated. If neither of the
2546 options are specified, or both are, then the permissions are allowed for the
2547 file system or volume, and all of its descendents. If only the
2549 option is used, then is allowed "locally" only for the specified file system.
2552 option is used, then is allowed only for the descendent file systems.
2555 Permissions are generally the ability to use a
2557 subcommand or change a
2559 property. The following permissions are available:
2560 .Bl -column -offset 4n "secondarycache" "subcommand"
2561 .It NAME Ta TYPE Ta NOTES
2562 .It allow Ta subcommand Ta Must Xo
2563 also have the permission that is being allowed
2565 .It clone Ta subcommand Ta Must Xo
2566 also have the 'create' ability and 'mount' ability in the origin file system
2568 .It create Ta subcommand Ta Must also have the 'mount' ability
2569 .It destroy Ta subcommand Ta Must also have the 'mount' ability
2570 .It diff Ta subcommand Ta Allows lookup of paths within a dataset given an
2571 object number, and the ability to create snapshots necessary to 'zfs diff'
2572 .It hold Ta subcommand Ta Allows adding a user hold to a snapshot
2573 .It mount Ta subcommand Ta Allows mount/umount of Tn ZFS No datasets
2574 .It promote Ta subcommand Ta Must Xo
2575 also have the 'mount' and 'promote' ability in the origin file system
2577 .It receive Ta subcommand Ta Must also have the 'mount' and 'create' ability
2578 .It release Ta subcommand Ta Allows Xo
2579 releasing a user hold which might destroy the snapshot
2581 .It rename Ta subcommand Ta Must Xo
2582 also have the 'mount' and 'create' ability in the new parent
2584 .It rollback Ta subcommand Ta Must also have the 'mount' ability
2585 .It send Ta subcommand
2586 .It share Ta subcommand Ta Allows Xo
2587 sharing file systems over the
2591 .It snapshot Ta subcommand Ta Must also have the 'mount' ability
2592 .It groupquota Ta other Ta Allows accessing any groupquota@... property
2593 .It groupused Ta other Ta Allows reading any groupused@... property
2594 .It userprop Ta other Ta Allows changing any user property
2595 .It userquota Ta other Ta Allows accessing any userquota@... property
2596 .It userused Ta other Ta Allows reading any userused@... property
2597 .It aclinherit Ta property
2598 .It aclmode Ta property
2599 .It atime Ta property
2600 .It canmount Ta property
2601 .It casesensitivity Ta property
2602 .It checksum Ta property
2603 .It compression Ta property
2604 .It copies Ta property
2605 .It dedup Ta property
2606 .It devices Ta property
2607 .It exec Ta property
2608 .It logbias Ta property
2609 .It jailed Ta property
2610 .It mlslabel Ta property
2611 .It mountpoint Ta property
2612 .It nbmand Ta property
2613 .It normalization Ta property
2614 .It primarycache Ta property
2615 .It quota Ta property
2616 .It readonly Ta property
2617 .It recordsize Ta property
2618 .It refquota Ta property
2619 .It refreservation Ta property
2620 .It reservation Ta property
2621 .It secondarycache Ta property
2622 .It setuid Ta property
2623 .It sharenfs Ta property
2624 .It sharesmb Ta property
2625 .It snapdir Ta property
2626 .It sync Ta property
2627 .It utf8only Ta property
2628 .It version Ta property
2629 .It volblocksize Ta property
2630 .It volsize Ta property
2631 .It vscan Ta property
2632 .It xattr Ta property
2638 .Ar perm Ns | Ns Ar @setname Ns Op Ns , Ns Ar perm Ns | Ns Ar @setname Ns
2640 .Ar filesystem Ns | Ns Ar volume
2643 Sets "create time" permissions. These permissions are granted (locally) to the
2644 creator of any newly-created descendent file system.
2650 .Ar perm Ns | Ns Ar @setname Ns Op Ns , Ns Ar perm Ns | Ns Ar @setname Ns
2652 .Ar filesystem Ns | Ns Ar volume
2655 Defines or adds permissions to a permission set. The set can be used by other
2657 commands for the specified file system and its descendents. Sets are evaluated
2658 dynamically, so changes to a set are immediately reflected. Permission sets
2659 follow the same naming restrictions as ZFS file systems, but the name must
2660 begin with an "at sign"
2662 and can be no more than 64 characters long.
2667 .Ar user Ns | Ns Ar group Ns Oo Ns , Ns Ar user Ns | Ns Ar group Oc Ns ...
2668 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
2670 .Ar filesystem Ns | Ns Ar volume
2676 .Fl e Ns | Ns Cm everyone
2677 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
2679 .Ar filesystem Ns | Ns Ar volume
2686 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
2688 .Ar filesystem Ns | Ns Ar volume
2691 Removes permissions that were granted with the
2693 command. No permissions are explicitly denied, so other permissions granted are
2694 still in effect. For example, if the permission is granted by an ancestor. If
2695 no permissions are specified, then all permissions for the specified
2696 .Ar user , group , No or everyone
2697 are removed. Specifying
2699 .Po or using the Fl e
2701 .Pc only removes the permissions that were granted to everyone ,
2702 not all permissions for every user and group. See the
2704 command for a description of the
2707 .Bl -tag -width indent
2709 Recursively remove the permissions from this file system and all descendents.
2717 .Oo Ar perm Ns | Ns Ar @setname Ns Op , Ns Ar perm Ns | Ns Ar @setname Ns
2719 .Ar filesystem Ns | Ns Ar volume
2722 Removes permissions from a permission set. If no permissions are specified,
2723 then all permissions are removed, thus removing the set entirely.
2728 .Ar tag snapshot Ns ...
2731 Adds a single reference, named with the
2733 argument, to the specified snapshot or snapshots. Each snapshot has its own tag
2734 namespace, and tags must be unique within that space.
2736 If a hold exists on a snapshot, attempts to destroy that snapshot by using the
2740 .Bl -tag -width indent
2742 Specifies that a hold with the given tag is applied recursively to the
2743 snapshots of all descendent file systems.
2752 Lists all existing user references for the given snapshot or snapshots.
2753 .Bl -tag -width indent
2755 Lists the holds that are set on the named descendent snapshots, in addition to
2756 listing the holds on the named snapshot.
2762 .Ar tag snapshot Ns ...
2765 Removes a single reference, named with the
2767 argument, from the specified snapshot or snapshots. The tag must already exist
2769 .Bl -tag -width indent
2771 Recursively releases a hold with the given tag on the snapshots of all
2772 descendent file systems.
2779 .Op Ar snapshot Ns | Ns Ar filesystem
2782 Display the difference between a snapshot of a given filesystem and another
2783 snapshot of that filesystem from a later time or the current contents of the
2784 filesystem. The first column is a character indicating the type of change,
2785 the other columns indicate pathname, new pathname
2786 .Pq in case of rename ,
2787 change in link count, and optionally file type and/or change time.
2789 The types of change are:
2790 .Bl -column -offset 2n indent
2791 .It \&- Ta path was removed
2792 .It \&+ Ta path was added
2793 .It \&M Ta path was modified
2794 .It \&R Ta path was renamed
2796 .Bl -tag -width indent
2798 Display an indication of the type of file, in a manner similar to the
2802 .Bl -column -offset 2n indent
2803 .It \&B Ta block device
2804 .It \&C Ta character device
2805 .It \&F Ta regular file
2806 .It \&/ Ta directory
2807 .It \&@ Ta symbolic link
2809 .It \&> Ta door (not supported on Fx )
2810 .It \&| Ta named pipe (not supported on Fx )
2811 .It \&P Ta event port (not supported on Fx )
2814 Give more parseable tab-separated output, without header lines and without
2817 Display the path's inode change time as the first column of output.
2822 .Ar jailid filesystem
2825 Attaches the specified
2827 to the jail identified by JID
2829 From now on this file system tree can be managed from within a jail if the
2831 property has been set. To use this functionality, the jail needs the
2842 for more information on managing jails and configuring the parameters above.
2846 .Ar jailid filesystem
2849 Detaches the specified
2851 from the jail identified by JID
2855 The following exit values are returned:
2856 .Bl -tag -offset 2n -width 2n
2858 Successful completion.
2862 Invalid command line options were specified.
2866 .It Sy Example 1 No Creating a Tn ZFS No File System Hierarchy
2868 The following commands create a file system named
2870 and a file system named
2874 is set for the parent file system, and is automatically inherited by the child
2876 .Bd -literal -offset 2n
2877 .Li # Ic zfs create pool/home
2878 .Li # Ic zfs set mountpoint=/home pool/home
2879 .Li # Ic zfs create pool/home/bob
2881 .It Sy Example 2 No Creating a Tn ZFS No Snapshot
2883 The following command creates a snapshot named
2885 This snapshot is mounted on demand in the
2887 directory at the root of the
2890 .Bd -literal -offset 2n
2891 .Li # Ic zfs snapshot pool/home/bob@yesterday
2893 .It Sy Example 3 No Creating and Destroying Multiple Snapshots
2895 The following command creates snapshots named
2899 and all of its descendent file systems. Each snapshot is mounted on demand in
2902 directory at the root of its file system. The second command destroys the newly
2904 .Bd -literal -offset 2n
2905 .Li # Ic zfs snapshot -r pool/home@yesterday
2906 .Li # Ic zfs destroy -r pool/home@yesterday
2908 .It Sy Example 4 No Disabling and Enabling File System Compression
2910 The following command disables the
2912 property for all file systems under
2914 The next command explicitly enables
2917 .Em pool/home/anne .
2918 .Bd -literal -offset 2n
2919 .Li # Ic zfs set compression=off pool/home
2920 .Li # Ic zfs set compression=on pool/home/anne
2922 .It Sy Example 5 No Listing Tn ZFS No Datasets
2924 The following command lists all active file systems and volumes in the system.
2925 Snapshots are displayed if the
2933 for more information on pool properties.
2934 .Bd -literal -offset 2n
2936 NAME USED AVAIL REFER MOUNTPOINT
2937 pool 450K 457G 18K /pool
2938 pool/home 315K 457G 21K /home
2939 pool/home/anne 18K 457G 18K /home/anne
2940 pool/home/bob 276K 457G 276K /home/bob
2942 .It Sy Example 6 No Setting a Quota on a Tn ZFS No File System
2944 The following command sets a quota of 50 Gbytes for
2946 .Bd -literal -offset 2n
2947 .Li # Ic zfs set quota=50G pool/home/bob
2949 .It Sy Example 7 No Listing Tn ZFS No Properties
2951 The following command lists all properties for
2953 .Bd -literal -offset 2n
2954 .Li # Ic zfs get all pool/home/bob
2955 NAME PROPERTY VALUE SOURCE
2956 pool/home/bob type filesystem -
2957 pool/home/bob creation Tue Jul 21 15:53 2009 -
2958 pool/home/bob used 21K -
2959 pool/home/bob available 20.0G -
2960 pool/home/bob referenced 21K -
2961 pool/home/bob compressratio 1.00x -
2962 pool/home/bob mounted yes -
2963 pool/home/bob quota 20G local
2964 pool/home/bob reservation none default
2965 pool/home/bob recordsize 128K default
2966 pool/home/bob mountpoint /home/bob default
2967 pool/home/bob sharenfs off default
2968 pool/home/bob checksum on default
2969 pool/home/bob compression on local
2970 pool/home/bob atime on default
2971 pool/home/bob devices on default
2972 pool/home/bob exec on default
2973 pool/home/bob setuid on default
2974 pool/home/bob readonly off default
2975 pool/home/bob jailed off default
2976 pool/home/bob snapdir hidden default
2977 pool/home/bob aclmode discard default
2978 pool/home/bob aclinherit restricted default
2979 pool/home/bob canmount on default
2980 pool/home/bob xattr on default
2981 pool/home/bob copies 1 default
2982 pool/home/bob version 5 -
2983 pool/home/bob utf8only off -
2984 pool/home/bob normalization none -
2985 pool/home/bob casesensitivity sensitive -
2986 pool/home/bob vscan off default
2987 pool/home/bob nbmand off default
2988 pool/home/bob sharesmb off default
2989 pool/home/bob refquota none default
2990 pool/home/bob refreservation none default
2991 pool/home/bob primarycache all default
2992 pool/home/bob secondarycache all default
2993 pool/home/bob usedbysnapshots 0 -
2994 pool/home/bob usedbydataset 21K -
2995 pool/home/bob usedbychildren 0 -
2996 pool/home/bob usedbyrefreservation 0 -
2997 pool/home/bob logbias latency default
2998 pool/home/bob dedup off default
2999 pool/home/bob mlslabel -
3000 pool/home/bob sync standard default
3001 pool/home/bob refcompressratio 1.00x -
3004 The following command gets a single property value.
3005 .Bd -literal -offset 2n
3006 .Li # Ic zfs get -H -o value compression pool/home/bob
3010 The following command lists all properties with local settings for
3012 .Bd -literal -offset 2n
3013 .Li # Ic zfs get -s local -o name,property,value all pool/home/bob
3015 pool/home/bob quota 20G
3016 pool/home/bob compression on
3018 .It Sy Example 8 No Rolling Back a Tn ZFS No File System
3020 The following command reverts the contents of
3022 to the snapshot named
3024 deleting all intermediate snapshots.
3025 .Bd -literal -offset 2n
3026 .Li # Ic zfs rollback -r pool/home/anne@yesterday
3028 .It Sy Example 9 No Creating a Tn ZFS No Clone
3030 The following command creates a writable file system whose initial contents are
3032 .Em pool/home/bob@yesterday .
3033 .Bd -literal -offset 2n
3034 .Li # Ic zfs clone pool/home/bob@yesterday pool/clone
3036 .It Sy Example 10 No Promoting a Tn ZFS No Clone
3038 The following commands illustrate how to test out changes to a file system, and
3039 then replace the original file system with the changed one, using clones, clone
3040 promotion, and renaming:
3041 .Bd -literal -offset 2n
3042 .Li # Ic zfs create pool/project/production
3046 .Pa /pool/project/production
3047 with data and continue with the following commands:
3048 .Bd -literal -offset 2n
3049 .Li # Ic zfs snapshot pool/project/production@today
3050 .Li # Ic zfs clone pool/project/production@today pool/project/beta
3054 .Pa /pool/project/beta
3055 and continue with the following commands:
3056 .Bd -literal -offset 2n
3057 .Li # Ic zfs promote pool/project/beta
3058 .Li # Ic zfs rename pool/project/production pool/project/legacy
3059 .Li # Ic zfs rename pool/project/beta pool/project/production
3062 Once the legacy version is no longer needed, it can be destroyed.
3063 .Bd -literal -offset 2n
3064 .Li # Ic zfs destroy pool/project/legacy
3066 .It Sy Example 11 No Inheriting Tn ZFS No Properties
3068 The following command causes
3074 property from their parent.
3075 .Bd -literal -offset 2n
3076 .Li # Ic zfs inherit checksum pool/home/bob pool/home/anne
3078 .It Sy Example 12 No Remotely Replicating Tn ZFS No Data
3080 The following commands send a full stream and then an incremental stream to a
3081 remote machine, restoring them into
3082 .Sy poolB/received/fs@a
3084 .Sy poolB/received/fs@b ,
3087 must contain the file system
3088 .Sy poolB/received ,
3089 and must not initially contain
3090 .Sy poolB/received/fs .
3091 .Bd -literal -offset 2n
3092 .Li # Ic zfs send pool/fs@a | ssh host zfs receive poolB/received/fs@a
3093 .Li # Ic zfs send -i a pool/fs@b | ssh host zfs receive poolB/received/fs
3102 The following command sends a full stream of
3103 .Sy poolA/fsA/fsB@snap
3104 to a remote machine, receiving it into
3105 .Sy poolB/received/fsA/fsB@snap .
3108 portion of the received snapshot's name is determined from the name of the sent
3111 must contain the file system
3112 .Sy poolB/received .
3114 .Sy poolB/received/fsA
3115 does not exist, it is created as an empty file system.
3116 .Bd -literal -offset 2n
3117 .Li # Ic zfs send poolA/fsA/fsB@snap | ssh host zfs receive -d poolB/received
3119 .It Sy Example 14 No Setting User Properties
3121 The following example sets the user-defined
3122 .Sy com.example:department
3123 property for a dataset.
3124 .Bd -literal -offset 2n
3125 .Li # Ic zfs set com.example:department=12345 tank/accounting
3127 .It Sy Example 15 No Performing a Rolling Snapshot
3129 The following example shows how to maintain a history of snapshots with a
3130 consistent naming scheme. To keep a week's worth of snapshots, the user
3131 destroys the oldest snapshot, renames the remaining snapshots, and then creates
3132 a new snapshot, as follows:
3133 .Bd -literal -offset 2n
3134 .Li # Ic zfs destroy -r pool/users@7daysago
3135 .Li # Ic zfs rename -r pool/users@6daysago @7daysago
3136 .Li # Ic zfs rename -r pool/users@5daysago @6daysago
3137 .Li # Ic zfs rename -r pool/users@4daysago @5daysago
3138 .Li # Ic zfs rename -r pool/users@3daysago @4daysago
3139 .Li # Ic zfs rename -r pool/users@2daysago @3daysago
3140 .Li # Ic zfs rename -r pool/users@yesterday @2daysago
3141 .Li # Ic zfs rename -r pool/users@today @yesterday
3142 .Li # Ic zfs snapshot -r pool/users@today
3148 Property Options on a ZFS File System
3151 The following command shows how to set
3153 property options to enable root access for a specific network on the
3155 file system. The contents of the
3160 .Bd -literal -offset 2n
3161 .Li # Ic zfs set sharenfs="maproot=root,network 192.168.0.0/24" tank/home
3164 Another way to write this command with the same result is:
3165 .Bd -literal -offset 2n
3166 .Li # Ic set zfs sharenfs="-maproot=root -network 192.168.0.0/24" tank/home
3172 Administration Permissions on a
3177 The following example shows how to set permissions so that user
3179 can create, destroy, mount, and take snapshots on
3184 .Bd -literal -offset 2n
3185 .Li # Ic zfs allow cindys create,destroy,mount,snapshot tank/cindys
3186 .Li # Ic zfs allow tank/cindys
3187 -------------------------------------------------------------
3188 Local+Descendent permissions on (tank/cindys)
3189 user cindys create,destroy,mount,snapshot
3190 -------------------------------------------------------------
3192 .It Sy Example 18 No Delegating Create Time Permissions on a Tn ZFS No Dataset
3194 The following example shows how to grant anyone in the group
3196 to create file systems in
3198 This syntax also allows staff members to destroy their own file systems, but
3199 not destroy anyone else's file system. The permissions on
3202 .Bd -literal -offset 2n
3203 .Li # Ic zfs allow staff create,mount tank/users
3204 .Li # Ic zfs allow -c destroy tank/users
3205 .Li # Ic zfs allow tank/users
3206 -------------------------------------------------------------
3207 Create time permissions on (tank/users)
3209 Local+Descendent permissions on (tank/users)
3210 group staff create,mount
3211 -------------------------------------------------------------
3215 Defining and Granting a Permission Set on a
3220 The following example shows how to define and grant a permission set on the
3222 file system. The permissions on
3225 .Bd -literal -offset 2n
3226 .Li # Ic zfs allow -s @pset create,destroy,snapshot,mount tank/users
3227 .Li # Ic zfs allow staff @pset tank/users
3228 .Li # Ic zfs allow tank/users
3229 -------------------------------------------------------------
3230 Permission sets on (tank/users)
3231 @pset create,destroy,mount,snapshot
3232 Create time permissions on (tank/users)
3234 Local+Descendent permissions on (tank/users)
3235 group staff @pset,create,mount
3236 -------------------------------------------------------------
3238 .It Sy Example 20 No Delegating Property Permissions on a Tn ZFS No Dataset
3240 The following example shows to grant the ability to set quotas and reservations
3243 file system. The permissions on
3246 .Bd -literal -offset 2n
3247 .Li # Ic zfs allow cindys quota,reservation users/home
3248 .Li # Ic zfs allow cindys
3249 -------------------------------------------------------------
3250 Local+Descendent permissions on (users/home)
3251 user cindys quota,reservation
3252 -------------------------------------------------------------
3253 .Li # Ic su - cindys
3254 .Li cindys% Ic zfs set quota=10G users/home/marks
3255 .Li cindys% Ic zfs get quota users/home/marks
3256 NAME PROPERTY VALUE SOURCE
3257 users/home/marks quota 10G local
3259 .It Sy Example 21 No Removing ZFS Delegated Permissions on a Tn ZFS No Dataset
3261 The following example shows how to remove the snapshot permission from the
3265 file system. The permissions on
3268 .Bd -literal -offset 2n
3269 .Li # Ic zfs unallow staff snapshot tank/users
3270 .Li # Ic zfs allow tank/users
3271 -------------------------------------------------------------
3272 Permission sets on (tank/users)
3273 @pset create,destroy,mount,snapshot
3274 Create time permissions on (tank/users)
3276 Local+Descendent permissions on (tank/users)
3277 group staff @pset,create,mount
3278 -------------------------------------------------------------
3280 .It Sy Example 22 Showing the differences between a snapshot and a ZFS Dataset
3282 The following example shows how to see what has changed between a prior
3283 snapshot of a ZFS Dataset and its current state. The
3285 option is used to indicate type information for the files affected.
3286 .Bd -literal -offset 2n
3287 .Li # Ic zfs diff tank/test@before tank/test
3289 M F /tank/test/linked (+1)
3290 R F /tank/test/oldname -> /tank/test/newname
3291 - F /tank/test/deleted
3292 + F /tank/test/created
3293 M F /tank/test/modified
3307 This manual page is a
3309 reimplementation of the
3313 modified and customized for
3315 and licensed under the
3316 Common Development and Distribution License
3321 implementation of this manual page was initially written by
3322 .An Martin Matuska Aq mm@FreeBSD.org .