etc/rc.subr

   1 # $NetBSD: rc.subr,v 1.67 2006/10/07 11:25:15 elad Exp $
   2 # $FreeBSD$
   3 #
   4 # Copyright (c) 1997-2004 The NetBSD Foundation, Inc.
   5 # All rights reserved.
   6 #
   7 # This code is derived from software contributed to The NetBSD Foundation
   8 # by Luke Mewburn.
   9 #
  10 # Redistribution and use in source and binary forms, with or without
  11 # modification, are permitted provided that the following conditions
  12 # are met:
  13 # 1. Redistributions of source code must retain the above copyright
  14 #    notice, this list of conditions and the following disclaimer.
  15 # 2. Redistributions in binary form must reproduce the above copyright
  16 #    notice, this list of conditions and the following disclaimer in the
  17 #    documentation and/or other materials provided with the distribution.
  18 #
  19 # THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
  20 # ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
  21 # TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
  22 # PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
  23 # BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
  24 # CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
  25 # SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
  26 # INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
  27 # CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
  28 # ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
  29 # POSSIBILITY OF SUCH DAMAGE.
  30 #
  31 # rc.subr
  32 #       functions used by various rc scripts
  33 #
  34
  35 : ${rcvar_manpage:='rc.conf(5)'}
  36 : ${RC_PID:=$$}; export RC_PID
  37
  38 #
  39 #       Operating System dependent/independent variables
  40 #
  41
  42 if [ -z "${_rc_subr_loaded}" ]; then
  43
  44 _rc_subr_loaded="YES"
  45
  46 SYSCTL="/sbin/sysctl"
  47 SYSCTL_N="${SYSCTL} -n"
  48 SYSCTL_W="${SYSCTL}"
  49 ID="/usr/bin/id"
  50 IDCMD="if [ -x $ID ]; then $ID -un; fi"
  51 PS="/bin/ps -ww"
  52 JID=`$PS -p $$ -o jid=`
  53
  54 #
  55 #       functions
  56 #       ---------
  57
  58 # set_rcvar [var] [defval] [desc]
  59 #
  60 #       Echo or define a rc.conf(5) variable name.  Global variable
  61 #       $rcvars is used.
  62 #
  63 #       If no argument is specified, echo "${name}_enable".
  64 #
  65 #       If only a var is specified, echo "${var}_enable".
  66 #
  67 #       If var and defval are specified, the ${var} is defined as
  68 #       rc.conf(5) variable and the default value is ${defvar}.  An
  69 #       optional argument $desc can also be specified to add a
  70 #       description for that.
  71 #
  72 set_rcvar()
  73 {
  74         case $# in
  75         0)
  76                 echo ${name}_enable
  77                 ;;
  78         1)
  79                 echo ${1}_enable
  80                 ;;
  81         *)
  82                 debug "rcvar_define: \$$1=$2 is added" \
  83                     " as a rc.conf(5) variable."
  84
  85                 local _var
  86                 _var=$1
  87                 rcvars="${rcvars# } $_var"
  88                 eval ${_var}_defval=\"$2\"
  89                 shift 2
  90                 # encode multiple lines of _desc
  91                 for l in "$@"; do
  92                         eval ${_var}_desc=\"\${${_var}_desc#^^}^^$l\"
  93                 done
  94                 eval ${_var}_desc=\"\${${_var}_desc#^^}\"
  95                 ;;
  96         esac
  97 }
  98
  99 # set_rcvar_obsolete oldvar [newvar] [msg]
 100 #       Define obsolete variable.
 101 #       Global variable $rcvars_obsolete is used.
 102 #
 103 set_rcvar_obsolete()
 104 {
 105         local _var
 106         _var=$1
 107         debug "rcvar_obsolete: \$$1(old) -> \$$2(new) is defined"
 108
 109         rcvars_obsolete="${rcvars_obsolete# } $1"
 110         eval ${1}_newvar=\"$2\"
 111         shift 2
 112         eval ${_var}_obsolete_msg=\"$*\"
 113 }
 114
 115 #
 116 # force_depend script
 117 #       Force a service to start. Intended for use by services
 118 #       to resolve dependency issues. It is assumed the caller
 119 #       has check to make sure this call is necessary
 120 #       $1 - filename of script, in /etc/rc.d, to run
 121 #
 122 force_depend()
 123 {
 124         _depend="$1"
 125
 126         info "${name} depends on ${_depend}, which will be forced to start."
 127         if ! /etc/rc.d/${_depend} forcestart; then
 128                 warn "Unable to force ${_depend}. It may already be running."
 129                 return 1
 130         fi
 131         return 0
 132 }
 133
 134 #
 135 # checkyesno var
 136 #       Test $1 variable, and warn if not set to YES or NO.
 137 #       Return 0 if it's "yes" (et al), nonzero otherwise.
 138 #
 139 checkyesno()
 140 {
 141         eval _value=\$${1}
 142         debug "checkyesno: $1 is set to $_value."
 143         case $_value in
 144
 145                 #       "yes", "true", "on", or "1"
 146         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
 147                 return 0
 148                 ;;
 149
 150                 #       "no", "false", "off", or "0"
 151         [Nn][Oo]|[Ff][Aa][Ll][Ss][Ee]|[Oo][Ff][Ff]|0)
 152                 return 1
 153                 ;;
 154         *)
 155                 warn "\$${1} is not set properly - see ${rcvar_manpage}."
 156                 return 1
 157                 ;;
 158         esac
 159 }
 160
 161 #
 162 # reverse_list list
 163 #       print the list in reverse order
 164 #
 165 reverse_list()
 166 {
 167         _revlist=
 168         for _revfile; do
 169                 _revlist="$_revfile $_revlist"
 170         done
 171         echo $_revlist
 172 }
 173
 174 # stop_boot always
 175 #       If booting directly to multiuser or $always is enabled,
 176 #       send SIGTERM to the parent (/etc/rc) to abort the boot.
 177 #       Otherwise just exit.
 178 #
 179 stop_boot()
 180 {
 181         local always
 182
 183         case $1 in
 184                 #       "yes", "true", "on", or "1"
 185         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
 186                 always=true
 187                 ;;
 188         *)
 189                 always=false
 190                 ;;
 191         esac
 192         if [ "$autoboot" = yes -o "$always" = true ]; then
 193                 echo "ERROR: ABORTING BOOT (sending SIGTERM to parent)!"
 194                 kill -TERM ${RC_PID}
 195         fi
 196         exit 1
 197 }
 198
 199 #
 200 # mount_critical_filesystems type
 201 #       Go through the list of critical filesystems as provided in
 202 #       the rc.conf(5) variable $critical_filesystems_${type}, checking
 203 #       each one to see if it is mounted, and if it is not, mounting it.
 204 #
 205 mount_critical_filesystems()
 206 {
 207         eval _fslist=\$critical_filesystems_${1}
 208         for _fs in $_fslist; do
 209                 mount | (
 210                         _ismounted=false
 211                         while read what _on on _type type; do
 212                                 if [ $on = $_fs ]; then
 213                                         _ismounted=true
 214                                 fi
 215                         done
 216                         if $_ismounted; then
 217                                 :
 218                         else
 219                                 mount $_fs >/dev/null 2>&1
 220                         fi
 221                 )
 222         done
 223 }
 224
 225 #
 226 # check_pidfile pidfile procname [interpreter]
 227 #       Parses the first line of pidfile for a PID, and ensures
 228 #       that the process is running and matches procname.
 229 #       Prints the matching PID upon success, nothing otherwise.
 230 #       interpreter is optional; see _find_processes() for details.
 231 #
 232 check_pidfile()
 233 {
 234         _pidfile=$1
 235         _procname=$2
 236         _interpreter=$3
 237         if [ -z "$_pidfile" -o -z "$_procname" ]; then
 238                 err 3 'USAGE: check_pidfile pidfile procname [interpreter]'
 239         fi
 240         if [ ! -f $_pidfile ]; then
 241                 debug "pid file ($_pidfile): not readable."
 242                 return
 243         fi
 244         read _pid _junk < $_pidfile
 245         if [ -z "$_pid" ]; then
 246                 debug "pid file ($_pidfile): no pid in file."
 247                 return
 248         fi
 249         _find_processes $_procname ${_interpreter:-.} '-p '"$_pid"
 250 }
 251
 252 #
 253 # check_process procname [interpreter]
 254 #       Ensures that a process (or processes) named procname is running.
 255 #       Prints a list of matching PIDs.
 256 #       interpreter is optional; see _find_processes() for details.
 257 #
 258 check_process()
 259 {
 260         _procname=$1
 261         _interpreter=$2
 262         if [ -z "$_procname" ]; then
 263                 err 3 'USAGE: check_process procname [interpreter]'
 264         fi
 265         _find_processes $_procname ${_interpreter:-.} '-ax'
 266 }
 267
 268 #
 269 # _find_processes procname interpreter psargs
 270 #       Search for procname in the output of ps generated by psargs.
 271 #       Prints the PIDs of any matching processes, space separated.
 272 #
 273 #       If interpreter == ".", check the following variations of procname
 274 #       against the first word of each command:
 275 #               procname
 276 #               `basename procname`
 277 #               `basename procname` + ":"
 278 #               "(" + `basename procname` + ")"
 279 #               "[" + `basename procname` + "]"
 280 #
 281 #       If interpreter != ".", read the first line of procname, remove the
 282 #       leading #!, normalise whitespace, append procname, and attempt to
 283 #       match that against each command, either as is, or with extra words
 284 #       at the end.  As an alternative, to deal with interpreted daemons
 285 #       using perl, the basename of the interpreter plus a colon is also
 286 #       tried as the prefix to procname.
 287 #
 288 _find_processes()
 289 {
 290         if [ $# -ne 3 ]; then
 291                 err 3 'USAGE: _find_processes procname interpreter psargs'
 292         fi
 293         _procname=$1
 294         _interpreter=$2
 295         _psargs=$3
 296
 297         _pref=
 298         if [ $_interpreter != "." ]; then       # an interpreted script
 299                 _script=${_chroot}${_chroot:+"/"}$_procname
 300                 if [ -r $_script ]; then
 301                         read _interp < $_script # read interpreter name
 302                         case "$_interp" in
 303                         \#!*)
 304                                 _interp=${_interp#\#!}  # strip #!
 305                                 set -- $_interp
 306                                 case $1 in
 307                                 */bin/env)
 308                                         shift   # drop env to get real name
 309                                         ;;
 310                                 esac
 311                                 if [ $_interpreter != $1 ]; then
 312                                         warn "\$command_interpreter $_interpreter != $1"
 313                                 fi
 314                                 ;;
 315                         *)
 316                                 warn "no shebang line in $_script"
 317                                 set -- $_interpreter
 318                                 ;;
 319                         esac
 320                 else
 321                         warn "cannot read shebang line from $_script"
 322                         set -- $_interpreter
 323                 fi
 324                 _interp="$* $_procname"         # cleanup spaces, add _procname
 325                 _interpbn=${1##*/}
 326                 _fp_args='_argv'
 327                 _fp_match='case "$_argv" in
 328                     ${_interp}|"${_interp} "*|"${_interpbn}: ${_procname}"*)'
 329         else                                    # a normal daemon
 330                 _procnamebn=${_procname##*/}
 331                 _fp_args='_arg0 _argv'
 332                 _fp_match='case "$_arg0" in
 333                     $_procname|$_procnamebn|${_procnamebn}:|"(${_procnamebn})"|"[${_procnamebn}]")'
 334         fi
 335
 336         _proccheck="\
 337                 $PS 2>/dev/null -o pid= -o jid= -o command= $_psargs"' |
 338                 while read _npid _jid '"$_fp_args"'; do
 339                         '"$_fp_match"'
 340                                 if [ "$JID" -eq "$_jid" ];
 341                                 then echo -n "$_pref$_npid";
 342                                 _pref=" ";
 343                                 fi
 344                                 ;;
 345                         esac
 346                 done'
 347
 348 #       debug "in _find_processes: proccheck is ($_proccheck)."
 349         eval $_proccheck
 350 }
 351
 352 #
 353 # wait_for_pids pid [pid ...]
 354 #       spins until none of the pids exist
 355 #
 356 wait_for_pids()
 357 {
 358         local _list _prefix _nlist _j
 359
 360         _list="$@"
 361         if [ -z "$_list" ]; then
 362                 return
 363         fi
 364         _prefix=
 365         while true; do
 366                 _nlist="";
 367                 for _j in $_list; do
 368                         if kill -0 $_j 2>/dev/null; then
 369                                 _nlist="${_nlist}${_nlist:+ }$_j"
 370                                 [ -n "$_prefix" ] && sleep 1
 371                         fi
 372                 done
 373                 if [ -z "$_nlist" ]; then
 374                         break
 375                 fi
 376                 _list=$_nlist
 377                 echo -n ${_prefix:-"Waiting for PIDS: "}$_list
 378                 _prefix=", "
 379                 pwait $_list 2>/dev/null
 380         done
 381         if [ -n "$_prefix" ]; then
 382                 echo "."
 383         fi
 384 }
 385
 386 #
 387 # get_pidfile_from_conf string file
 388 #
 389 #       Takes a string to search for in the specified file.
 390 #       Ignores lines with traditional comment characters.
 391 #
 392 # Example:
 393 #
 394 # if get_pidfile_from_conf string file; then
 395 #       pidfile="$_pidfile_from_conf"
 396 # else
 397 #       pidfile='appropriate default'
 398 # fi
 399 #
 400 get_pidfile_from_conf()
 401 {
 402         if [ -z "$1" -o -z "$2" ]; then
 403                 err 3 "USAGE: get_pidfile_from_conf string file ($name)"
 404         fi
 405
 406         local string file line
 407
 408         string="$1" ; file="$2"
 409
 410         if [ ! -s "$file" ]; then
 411                 err 3 "get_pidfile_from_conf: $file does not exist ($name)"
 412         fi
 413
 414         while read line; do
 415                 case "$line" in
 416                 *[#\;]*${string}*)      continue ;;
 417                 *${string}*)            break ;;
 418                 esac
 419         done < $file
 420
 421         if [ -n "$line" ]; then
 422                 line=${line#*/}
 423                 _pidfile_from_conf="/${line%%[\"\;]*}"
 424         else
 425                 return 1
 426         fi
 427 }
 428
 429 #
 430 # check_startmsgs
 431 #       If rc_quiet is set (usually as a result of using faststart at
 432 #       boot time) check if rc_startmsgs is enabled.
 433 #
 434 check_startmsgs()
 435 {
 436         if [ -n "$rc_quiet" ]; then
 437                 checkyesno rc_startmsgs
 438         else
 439                 return 0
 440         fi
 441 }
 442
 443 #
 444 # run_rc_command argument
 445 #       Search for argument in the list of supported commands, which is:
 446 #               "start stop restart rcvar status poll ${extra_commands}"
 447 #       If there's a match, run ${argument}_cmd or the default method
 448 #       (see below).
 449 #
 450 #       If argument has a given prefix, then change the operation as follows:
 451 #               Prefix  Operation
 452 #               ------  ---------
 453 #               fast    Skip the pid check, and set rc_fast=yes, rc_quiet=yes
 454 #               force   Set ${rcvar} to YES, and set rc_force=yes
 455 #               one     Set ${rcvar} to YES
 456 #               quiet   Don't output some diagnostics, and set rc_quiet=yes
 457 #
 458 #       The following globals are used:
 459 #
 460 #       Name            Needed  Purpose
 461 #       ----            ------  -------
 462 #       name            y       Name of script.
 463 #
 464 #       command         n       Full path to command.
 465 #                               Not needed if ${rc_arg}_cmd is set for
 466 #                               each keyword.
 467 #
 468 #       command_args    n       Optional args/shell directives for command.
 469 #
 470 #       command_interpreter n   If not empty, command is interpreted, so
 471 #                               call check_{pidfile,process}() appropriately.
 472 #
 473 #       desc            n       Description of script.
 474 #
 475 #       extra_commands  n       List of extra commands supported.
 476 #
 477 #       pidfile         n       If set, use check_pidfile $pidfile $command,
 478 #                               otherwise use check_process $command.
 479 #                               In either case, only check if $command is set.
 480 #
 481 #       procname        n       Process name to check for instead of $command.
 482 #
 483 #       rcvar           n       This is checked with checkyesno to determine
 484 #                               if the action should be run.
 485 #
 486 #       ${name}_program n       Full path to command.
 487 #                               Meant to be used in /etc/rc.conf to override
 488 #                               ${command}.
 489 #
 490 #       ${name}_chroot  n       Directory to chroot to before running ${command}
 491 #                               Requires /usr to be mounted.
 492 #
 493 #       ${name}_chdir   n       Directory to cd to before running ${command}
 494 #                               (if not using ${name}_chroot).
 495 #
 496 #       ${name}_flags   n       Arguments to call ${command} with.
 497 #                               NOTE:   $flags from the parent environment
 498 #                                       can be used to override this.
 499 #
 500 #       ${name}_nice    n       Nice level to run ${command} at.
 501 #
 502 #       ${name}_user    n       User to run ${command} as, using su(1) if not
 503 #                               using ${name}_chroot.
 504 #                               Requires /usr to be mounted.
 505 #
 506 #       ${name}_group   n       Group to run chrooted ${command} as.
 507 #                               Requires /usr to be mounted.
 508 #
 509 #       ${name}_groups  n       Comma separated list of supplementary groups
 510 #                               to run the chrooted ${command} with.
 511 #                               Requires /usr to be mounted.
 512 #
 513 #       ${rc_arg}_cmd   n       If set, use this as the method when invoked;
 514 #                               Otherwise, use default command (see below)
 515 #
 516 #       ${rc_arg}_precmd n      If set, run just before performing the
 517 #                               ${rc_arg}_cmd method in the default
 518 #                               operation (i.e, after checking for required
 519 #                               bits and process (non)existence).
 520 #                               If this completes with a non-zero exit code,
 521 #                               don't run ${rc_arg}_cmd.
 522 #
 523 #       ${rc_arg}_postcmd n     If set, run just after performing the
 524 #                               ${rc_arg}_cmd method, if that method
 525 #                               returned a zero exit code.
 526 #
 527 #       required_dirs   n       If set, check for the existence of the given
 528 #                               directories before running a (re)start command.
 529 #
 530 #       required_files  n       If set, check for the readability of the given
 531 #                               files before running a (re)start command.
 532 #
 533 #       required_modules n      If set, ensure the given kernel modules are
 534 #                               loaded before running a (re)start command.
 535 #                               The check and possible loads are actually
 536 #                               done after start_precmd so that the modules
 537 #                               aren't loaded in vain, should the precmd
 538 #                               return a non-zero status to indicate a error.
 539 #                               If a word in the list looks like "foo:bar",
 540 #                               "foo" is the KLD file name and "bar" is the
 541 #                               module name.  If a word looks like "foo~bar",
 542 #                               "foo" is the KLD file name and "bar" is a
 543 #                               egrep(1) pattern matching the module name.
 544 #                               Otherwise the module name is assumed to be
 545 #                               the same as the KLD file name, which is most
 546 #                               common.  See load_kld().
 547 #
 548 #       required_vars   n       If set, perform checkyesno on each of the
 549 #                               listed variables before running the default
 550 #                               (re)start command.
 551 #
 552 #       Default behaviour for a given argument, if no override method is
 553 #       provided:
 554 #
 555 #       Argument        Default behaviour
 556 #       --------        -----------------
 557 #       start           if !running && checkyesno ${rcvar}
 558 #                               ${command}
 559 #
 560 #       stop            if ${pidfile}
 561 #                               rc_pid=$(check_pidfile $pidfile $command)
 562 #                       else
 563 #                               rc_pid=$(check_process $command)
 564 #                       kill $sig_stop $rc_pid
 565 #                       wait_for_pids $rc_pid
 566 #                       ($sig_stop defaults to TERM.)
 567 #
 568 #       reload          Similar to stop, except use $sig_reload instead,
 569 #                       and doesn't wait_for_pids.
 570 #                       $sig_reload defaults to HUP.
 571 #                       Note that `reload' isn't provided by default,
 572 #                       it should be enabled via $extra_commands.
 573 #
 574 #       restart         Run `stop' then `start'.
 575 #
 576 #       status          Show if ${command} is running, etc.
 577 #
 578 #       poll            Wait for ${command} to exit.
 579 #
 580 #       rcvar           Display what rc.conf variable is used (if any).
 581 #
 582 #       Variables available to methods, and after run_rc_command() has
 583 #       completed:
 584 #
 585 #       Variable        Purpose
 586 #       --------        -------
 587 #       rc_arg          Argument to command, after fast/force/one processing
 588 #                       performed
 589 #
 590 #       rc_flags        Flags to start the default command with.
 591 #                       Defaults to ${name}_flags, unless overridden
 592 #                       by $flags from the environment.
 593 #                       This variable may be changed by the precmd method.
 594 #
 595 #       rc_pid          PID of command (if appropriate)
 596 #
 597 #       rc_fast         Not empty if "fast" was provided (q.v.)
 598 #
 599 #       rc_force        Not empty if "force" was provided (q.v.)
 600 #
 601 #       rc_quiet        Not empty if "quiet" was provided
 602 #
 603 #
 604 run_rc_command()
 605 {
 606         _return=0
 607         rc_arg=$1
 608         if [ -z "$name" ]; then
 609                 err 3 'run_rc_command: $name is not set.'
 610         fi
 611
 612         # Don't repeat the first argument when passing additional command-
 613         # line arguments to the command subroutines.
 614         #
 615         shift 1
 616         rc_extra_args="$*"
 617
 618         _rc_prefix=
 619         case "$rc_arg" in
 620         fast*)                          # "fast" prefix; don't check pid
 621                 rc_arg=${rc_arg#fast}
 622                 rc_fast=yes
 623                 rc_quiet=yes
 624                 ;;
 625         force*)                         # "force" prefix; always run
 626                 rc_force=yes
 627                 _rc_prefix=force
 628                 rc_arg=${rc_arg#${_rc_prefix}}
 629                 if [ -n "${rcvar}" ]; then
 630                         eval ${rcvar}=YES
 631                 fi
 632                 ;;
 633         one*)                           # "one" prefix; set ${rcvar}=yes
 634                 _rc_prefix=one
 635                 rc_arg=${rc_arg#${_rc_prefix}}
 636                 if [ -n "${rcvar}" ]; then
 637                         eval ${rcvar}=YES
 638                 fi
 639                 ;;
 640         quiet*)                         # "quiet" prefix; omit some messages
 641                 _rc_prefix=quiet
 642                 rc_arg=${rc_arg#${_rc_prefix}}
 643                 rc_quiet=yes
 644                 ;;
 645         esac
 646
 647         eval _override_command=\$${name}_program
 648         command=${_override_command:-$command}
 649
 650         _keywords="start stop restart rcvar $extra_commands"
 651         rc_pid=
 652         _pidcmd=
 653         _procname=${procname:-${command}}
 654
 655                                         # setup pid check command
 656         if [ -n "$_procname" ]; then
 657                 if [ -n "$pidfile" ]; then
 658                         _pidcmd='rc_pid=$(check_pidfile '"$pidfile $_procname $command_interpreter"')'
 659                 else
 660                         _pidcmd='rc_pid=$(check_process '"$_procname $command_interpreter"')'
 661                 fi
 662                 if [ -n "$_pidcmd" ]; then
 663                         _keywords="${_keywords} status poll"
 664                 fi
 665         fi
 666
 667         if [ -z "$rc_arg" ]; then
 668                 rc_usage $_keywords
 669         fi
 670
 671         if [ -n "$flags" ]; then        # allow override from environment
 672                 rc_flags=$flags
 673         else
 674                 eval rc_flags=\$${name}_flags
 675         fi
 676         eval _chdir=\$${name}_chdir     _chroot=\$${name}_chroot \
 677             _nice=\$${name}_nice        _user=\$${name}_user \
 678             _group=\$${name}_group      _groups=\$${name}_groups
 679
 680         if [ -n "$_user" ]; then        # unset $_user if running as that user
 681                 if [ "$_user" = "$(eval $IDCMD)" ]; then
 682                         unset _user
 683                 fi
 684         fi
 685
 686         eval $_pidcmd                   # determine the pid if necessary
 687
 688         for _elem in $_keywords; do
 689                 if [ "$_elem" != "$rc_arg" ]; then
 690                         continue
 691                 fi
 692                                         # if ${rcvar} is set, $1 is not "rcvar"
 693                                         # and ${rc_pid} is not set, then run
 694                                         #       checkyesno ${rcvar}
 695                                         # and return if that failed
 696                                         #
 697                 if [ -n "${rcvar}" -a "$rc_arg" != "rcvar" -a "$rc_arg" != "stop" ] ||
 698                     [ -n "${rcvar}" -a "$rc_arg" = "stop" -a -z "${rc_pid}" ]; then
 699                         if ! checkyesno ${rcvar}; then
 700                                 if [ -n "${rc_quiet}" ]; then
 701                                         return 0
 702                                 fi
 703                                 echo -n "Cannot '${rc_arg}' $name. Set ${rcvar} to "
 704                                 echo -n "YES in /etc/rc.conf or use 'one${rc_arg}' "
 705                                 echo "instead of '${rc_arg}'."
 706                                 return 0
 707                         fi
 708                 fi
 709
 710                                         # if there's a custom ${XXX_cmd},
 711                                         # run that instead of the default
 712                                         #
 713                 eval _cmd=\$${rc_arg}_cmd \
 714                      _precmd=\$${rc_arg}_precmd \
 715                      _postcmd=\$${rc_arg}_postcmd
 716
 717                 if [ -n "$_cmd" ]; then
 718                         _run_rc_precmd || return 1
 719                         _run_rc_doit "$_cmd $rc_extra_args" || return 1
 720                         _run_rc_postcmd
 721                         return $_return
 722                 fi
 723
 724                 case "$rc_arg" in       # default operations...
 725
 726                 status)
 727                         _run_rc_precmd || return 1
 728                         if [ -n "$rc_pid" ]; then
 729                                 echo "${name} is running as pid $rc_pid."
 730                         else
 731                                 echo "${name} is not running."
 732                                 return 1
 733                         fi
 734                         _run_rc_postcmd
 735                         ;;
 736
 737                 start)
 738                         if [ -z "$rc_fast" -a -n "$rc_pid" ]; then
 739                                 echo 1>&2 "${name} already running? (pid=$rc_pid)."
 740                                 return 1
 741                         fi
 742
 743                         if [ ! -x ${_chroot}${_chroot:+"/"}${command} ]; then
 744                                 warn "run_rc_command: cannot run $command"
 745                                 return 1
 746                         fi
 747
 748                         if ! _run_rc_precmd; then
 749                                 warn "failed precmd routine for ${name}"
 750                                 return 1
 751                         fi
 752
 753                                         # setup the full command to run
 754                                         #
 755                         check_startmsgs && echo "Starting ${name}."
 756                         if [ -n "$_chroot" ]; then
 757                                 _doit="\
 758 ${_nice:+nice -n $_nice }\
 759 chroot ${_user:+-u $_user }${_group:+-g $_group }${_groups:+-G $_groups }\
 760 $_chroot $command $rc_flags $command_args"
 761                         else
 762                                 _doit="\
 763 ${_chdir:+cd $_chdir && }\
 764 $command $rc_flags $command_args"
 765                                 if [ -n "$_user" ]; then
 766                                     _doit="su -m $_user -c 'sh -c \"$_doit\"'"
 767                                 fi
 768                                 if [ -n "$_nice" ]; then
 769                                         if [ -z "$_user" ]; then
 770                                                 _doit="sh -c \"$_doit\""
 771                                         fi
 772                                         _doit="nice -n $_nice $_doit"
 773                                 fi
 774                         fi
 775
 776                                         # run the full command
 777                                         #
 778                         if ! _run_rc_doit "$_doit"; then
 779                                 warn "failed to start ${name}"
 780                                 return 1
 781                         fi
 782
 783                                         # finally, run postcmd
 784                                         #
 785                         _run_rc_postcmd
 786                         ;;
 787
 788                 stop)
 789                         if [ -z "$rc_pid" ]; then
 790                                 [ -n "$rc_fast" ] && return 0
 791                                 _run_rc_notrunning
 792                                 return 1
 793                         fi
 794
 795                         _run_rc_precmd || return 1
 796
 797                                         # send the signal to stop
 798                                         #
 799                         echo "Stopping ${name}."
 800                         _doit=$(_run_rc_killcmd "${sig_stop:-TERM}")
 801                         _run_rc_doit "$_doit" || return 1
 802
 803                                         # wait for the command to exit,
 804                                         # and run postcmd.
 805                         wait_for_pids $rc_pid
 806
 807                         _run_rc_postcmd
 808                         ;;
 809
 810                 reload)
 811                         if [ -z "$rc_pid" ]; then
 812                                 _run_rc_notrunning
 813                                 return 1
 814                         fi
 815
 816                         _run_rc_precmd || return 1
 817
 818                         _doit=$(_run_rc_killcmd "${sig_reload:-HUP}")
 819                         _run_rc_doit "$_doit" || return 1
 820
 821                         _run_rc_postcmd
 822                         ;;
 823
 824                 restart)
 825                                         # prevent restart being called more
 826                                         # than once by any given script
 827                                         #
 828                         if ${_rc_restart_done:-false}; then
 829                                 return 0
 830                         fi
 831                         _rc_restart_done=true
 832
 833                         _run_rc_precmd || return 1
 834
 835                         # run those in a subshell to keep global variables
 836                         ( run_rc_command ${_rc_prefix}stop $rc_extra_args )
 837                         ( run_rc_command ${_rc_prefix}start $rc_extra_args )
 838                         _return=$?
 839                         [ $_return -ne 0 ] && [ -z "$rc_force" ] && return 1
 840
 841                         _run_rc_postcmd
 842                         ;;
 843
 844                 poll)
 845                         _run_rc_precmd || return 1
 846                         if [ -n "$rc_pid" ]; then
 847                                 wait_for_pids $rc_pid
 848                         fi
 849                         _run_rc_postcmd
 850                         ;;
 851
 852                 rcvar)
 853                         echo -n "# $name"
 854                         if [ -n "$desc" ]; then
 855                                 echo " : $desc"
 856                         else
 857                                 echo ""
 858                         fi
 859                         echo "#"
 860                         # Get unique vars in $rcvar $rcvars
 861                         for _v in $rcvar $rcvars; do
 862                                 case $v in
 863                                 $_v\ *|\ *$_v|*\ $_v\ *) ;;
 864                                 *)      v="${v# } $_v" ;;
 865                                 esac
 866                         done
 867
 868                         # Display variables.
 869                         for _v in $v; do
 870                                 if [ -z "$_v" ]; then
 871                                         continue
 872                                 fi
 873
 874                                 eval _desc=\$${_v}_desc
 875                                 eval _defval=\$${_v}_defval
 876                                 _h="-"
 877
 878                                 eval echo \"$_v=\\\"\$$_v\\\"\"
 879                                 # decode multiple lines of _desc
 880                                 while [ -n "$_desc" ]; do
 881                                         case $_desc in
 882                                         *^^*)
 883                                                 echo "# $_h ${_desc%%^^*}"
 884                                                 _desc=${_desc#*^^}
 885                                                 _h=" "
 886                                                 ;;
 887                                         *)
 888                                                 echo "# $_h ${_desc}"
 889                                                 break
 890                                                 ;;
 891                                         esac
 892                                 done
 893                                 echo "#   (default: \"$_defval\")"
 894                         done
 895                         echo ""
 896                         ;;
 897
 898                 *)
 899                         rc_usage $_keywords
 900                         ;;
 901
 902                 esac
 903                 return $_return
 904         done
 905
 906         echo 1>&2 "$0: unknown directive '$rc_arg'."
 907         rc_usage $_keywords
 908         # not reached
 909 }
 910
 911 #
 912 # Helper functions for run_rc_command: common code.
 913 # They use such global variables besides the exported rc_* ones:
 914 #
 915 #       name           R/W
 916 #       ------------------
 917 #       _precmd         R
 918 #       _postcmd        R
 919 #       _return         W
 920 #
 921 _run_rc_precmd()
 922 {
 923         check_required_before "$rc_arg" || return 1
 924
 925         if [ -n "$_precmd" ]; then
 926                 debug "run_rc_command: ${rc_arg}_precmd: $_precmd $rc_extra_args"
 927                 eval "$_precmd $rc_extra_args"
 928                 _return=$?
 929
 930                 # If precmd failed and force isn't set, request exit.
 931                 if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then
 932                         return 1
 933                 fi
 934         fi
 935
 936         check_required_after "$rc_arg" || return 1
 937
 938         return 0
 939 }
 940
 941 _run_rc_postcmd()
 942 {
 943         if [ -n "$_postcmd" ]; then
 944                 debug "run_rc_command: ${rc_arg}_postcmd: $_postcmd $rc_extra_args"
 945                 eval "$_postcmd $rc_extra_args"
 946                 _return=$?
 947         fi
 948         return 0
 949 }
 950
 951 _run_rc_doit()
 952 {
 953         debug "run_rc_command: doit: $*"
 954         eval "$@"
 955         _return=$?
 956
 957         # If command failed and force isn't set, request exit.
 958         if [ $_return -ne 0 ] && [ -z "$rc_force" ]; then
 959                 return 1
 960         fi
 961
 962         return 0
 963 }
 964
 965 _run_rc_notrunning()
 966 {
 967         local _pidmsg
 968
 969         if [ -n "$pidfile" ]; then
 970                 _pidmsg=" (check $pidfile)."
 971         else
 972                 _pidmsg=
 973         fi
 974         echo 1>&2 "${name} not running?${_pidmsg}"
 975 }
 976
 977 _run_rc_killcmd()
 978 {
 979         local _cmd
 980
 981         _cmd="kill -$1 $rc_pid"
 982         if [ -n "$_user" ]; then
 983                 _cmd="su -m ${_user} -c 'sh -c \"${_cmd}\"'"
 984         fi
 985         echo "$_cmd"
 986 }
 987
 988 #
 989 # run_rc_script file arg
 990 #       Start the script `file' with `arg', and correctly handle the
 991 #       return value from the script.
 992 #       If `file' ends with `.sh', it's sourced into the current environment
 993 #       when $rc_fast_and_loose is set, otherwise it is run as a child process.
 994 #       If `file' appears to be a backup or scratch file, ignore it.
 995 #       Otherwise if it is executable run as a child process.
 996 #
 997 run_rc_script()
 998 {
 999         _file=$1
1000         _arg=$2
1001         if [ -z "$_file" -o -z "$_arg" ]; then
1002                 err 3 'USAGE: run_rc_script file arg'
1003         fi
1004
1005         unset   name command command_args command_interpreter \
1006                 extra_commands pidfile procname \
1007                 rcvar rcvars rcvars_obsolete required_dirs required_files \
1008                 required_vars
1009         eval unset ${_arg}_cmd ${_arg}_precmd ${_arg}_postcmd
1010
1011         case "$_file" in
1012         /etc/rc.d/*.sh)                 # no longer allowed in the base
1013                 warn "Ignoring old-style startup script $_file"
1014                 ;;
1015         *[~#]|*.OLD|*.bak|*.orig|*,v)   # scratch file; skip
1016                 warn "Ignoring scratch file $_file"
1017                 ;;
1018         *)                              # run in subshell
1019                 if [ -x $_file ]; then
1020                         if [ -n "$rc_fast_and_loose" ]; then
1021                                 set $_arg; . $_file
1022                         else
1023                                 ( trap "echo Script $_file interrupted; kill -QUIT $$" 3
1024                                   trap "echo Script $_file interrupted; exit 1" 2
1025                                   trap "echo Script $_file running" 29
1026                                   set $_arg; . $_file )
1027                         fi
1028                 fi
1029                 ;;
1030         esac
1031 }
1032
1033 #
1034 # load_rc_config name
1035 #       Source in the configuration file for a given name.
1036 #
1037 load_rc_config()
1038 {
1039         local _name _var _defval _v _msg _new
1040         _name=$1
1041         if [ -z "$_name" ]; then
1042                 err 3 'USAGE: load_rc_config name'
1043         fi
1044
1045         if ${_rc_conf_loaded:-false}; then
1046                 :
1047         else
1048                 if [ -r /etc/defaults/rc.conf ]; then
1049                         debug "Sourcing /etc/defaults/rc.conf"
1050                         . /etc/defaults/rc.conf
1051                         source_rc_confs
1052                 elif [ -r /etc/rc.conf ]; then
1053                         debug "Sourcing /etc/rc.conf (/etc/defaults/rc.conf doesn't exist)."
1054                         . /etc/rc.conf
1055                 fi
1056                 _rc_conf_loaded=true
1057         fi
1058         if [ -f /etc/rc.conf.d/"$_name" ]; then
1059                 debug "Sourcing /etc/rc.conf.d/${_name}"
1060                 . /etc/rc.conf.d/"$_name"
1061         fi
1062
1063         # Old variable names support
1064         #
1065         [ -n "$enable_quotas" ] && quota_enable="$enable_quotas"
1066
1067         # Set defaults if defined.
1068         for _var in $rcvar $rcvars; do
1069                 eval _defval=\$${_var}_defval
1070                 if [ -n "$_defval" ]; then
1071                         eval : \${$_var:=\$${_var}_defval}
1072                 fi
1073         done
1074
1075         # check obsolete rc.conf variables
1076         for _var in $rcvars_obsolete; do
1077                 eval _v=\$$_var
1078                 eval _msg=\$${_var}_obsolete_msg
1079                 eval _new=\$${_var}_newvar
1080                 case $_v in
1081                 "")
1082                         ;;
1083                 *)
1084                         if [ -z "$_new" ]; then
1085                                 _msg="Ignored."
1086                         else
1087                                 eval $_new=\"\$$_var\"
1088                                 if [ -z "$_msg" ]; then
1089                                         _msg="Use \$$_new instead."
1090                                 fi
1091                         fi
1092                         warn "\$$_var is obsolete.  $_msg"
1093                         ;;
1094                 esac
1095         done
1096 }
1097
1098 #
1099 # load_rc_config_var name var
1100 #       Read the rc.conf(5) var for name and set in the
1101 #       current shell, using load_rc_config in a subshell to prevent
1102 #       unwanted side effects from other variable assignments.
1103 #
1104 load_rc_config_var()
1105 {
1106         if [ $# -ne 2 ]; then
1107                 err 3 'USAGE: load_rc_config_var name var'
1108         fi
1109         eval $(eval '(
1110                 load_rc_config '$1' >/dev/null;
1111                 if [ -n "${'$2'}" -o "${'$2'-UNSET}" != "UNSET" ]; then
1112                         echo '$2'=\'\''${'$2'}\'\'';
1113                 fi
1114         )' )
1115 }
1116
1117 #
1118 # rc_usage commands
1119 #       Print a usage string for $0, with `commands' being a list of
1120 #       valid commands.
1121 #
1122 rc_usage()
1123 {
1124         echo -n 1>&2 "Usage: $0 [fast|force|one]("
1125
1126         _sep=
1127         for _elem; do
1128                 echo -n 1>&2 "$_sep$_elem"
1129                 _sep="|"
1130         done
1131         echo 1>&2 ")"
1132         exit 1
1133 }
1134
1135 #
1136 # err exitval message
1137 #       Display message to stderr and log to the syslog, and exit with exitval.
1138 #
1139 err()
1140 {
1141         exitval=$1
1142         shift
1143
1144         if [ -x /usr/bin/logger ]; then
1145                 logger "$0: ERROR: $*"
1146         fi
1147         echo 1>&2 "$0: ERROR: $*"
1148         exit $exitval
1149 }
1150
1151 #
1152 # warn message
1153 #       Display message to stderr and log to the syslog.
1154 #
1155 warn()
1156 {
1157         if [ -x /usr/bin/logger ]; then
1158                 logger "$0: WARNING: $*"
1159         fi
1160         echo 1>&2 "$0: WARNING: $*"
1161 }
1162
1163 #
1164 # info message
1165 #       Display informational message to stdout and log to syslog.
1166 #
1167 info()
1168 {
1169         case ${rc_info} in
1170         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1171                 if [ -x /usr/bin/logger ]; then
1172                         logger "$0: INFO: $*"
1173                 fi
1174                 echo "$0: INFO: $*"
1175                 ;;
1176         esac
1177 }
1178
1179 #
1180 # debug message
1181 #       If debugging is enabled in rc.conf output message to stderr.
1182 #       BEWARE that you don't call any subroutine that itself calls this
1183 #       function.
1184 #
1185 debug()
1186 {
1187         case ${rc_debug} in
1188         [Yy][Ee][Ss]|[Tt][Rr][Uu][Ee]|[Oo][Nn]|1)
1189                 if [ -x /usr/bin/logger ]; then
1190                         logger "$0: DEBUG: $*"
1191                 fi
1192                 echo 1>&2 "$0: DEBUG: $*"
1193                 ;;
1194         esac
1195 }
1196
1197 #
1198 # backup_file action file cur backup
1199 #       Make a backup copy of `file' into `cur', and save the previous
1200 #       version of `cur' as `backup' or use rcs for archiving.
1201 #
1202 #       This routine checks the value of the backup_uses_rcs variable,
1203 #       which can be either YES or NO.
1204 #
1205 #       The `action' keyword can be one of the following:
1206 #
1207 #       add             `file' is now being backed up (and is possibly
1208 #                       being reentered into the backups system).  `cur'
1209 #                       is created and RCS files, if necessary, are
1210 #                       created as well.
1211 #
1212 #       update          `file' has changed and needs to be backed up.
1213 #                       If `cur' exists, it is copied to to `back' or
1214 #                       checked into RCS (if the repository file is old),
1215 #                       and then `file' is copied to `cur'.  Another RCS
1216 #                       check in done here if RCS is being used.
1217 #
1218 #       remove          `file' is no longer being tracked by the backups
1219 #                       system.  If RCS is not being used, `cur' is moved
1220 #                       to `back', otherwise an empty file is checked in,
1221 #                       and then `cur' is removed.
1222 #
1223 #
1224 backup_file()
1225 {
1226         _action=$1
1227         _file=$2
1228         _cur=$3
1229         _back=$4
1230
1231         if checkyesno backup_uses_rcs; then
1232                 _msg0="backup archive"
1233                 _msg1="update"
1234
1235                 # ensure that history file is not locked
1236                 if [ -f $_cur,v ]; then
1237                         rcs -q -u -U -M $_cur
1238                 fi
1239
1240                 # ensure after switching to rcs that the
1241                 # current backup is not lost
1242                 if [ -f $_cur ]; then
1243                         # no archive, or current newer than archive
1244                         if [ ! -f $_cur,v -o $_cur -nt $_cur,v ]; then
1245                                 ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1246                                 rcs -q -kb -U $_cur
1247                                 co -q -f -u $_cur
1248                         fi
1249                 fi
1250
1251                 case $_action in
1252                 add|update)
1253                         cp -p $_file $_cur
1254                         ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1255                         rcs -q -kb -U $_cur
1256                         co -q -f -u $_cur
1257                         chown root:wheel $_cur $_cur,v
1258                         ;;
1259                 remove)
1260                         cp /dev/null $_cur
1261                         ci -q -f -u -t-"$_msg0" -m"$_msg1" $_cur
1262                         rcs -q -kb -U $_cur
1263                         chown root:wheel $_cur $_cur,v
1264                         rm $_cur
1265                         ;;
1266                 esac
1267         else
1268                 case $_action in
1269                 add|update)
1270                         if [ -f $_cur ]; then
1271                                 cp -p $_cur $_back
1272                         fi
1273                         cp -p $_file $_cur
1274                         chown root:wheel $_cur
1275                         ;;
1276                 remove)
1277                         mv -f $_cur $_back
1278                         ;;
1279                 esac
1280         fi
1281 }
1282
1283 # make_symlink src link
1284 #       Make a symbolic link 'link' to src from basedir. If the
1285 #       directory in which link is to be created does not exist
1286 #       a warning will be displayed and an error will be returned.
1287 #       Returns 0 on sucess, 1 otherwise.
1288 #
1289 make_symlink()
1290 {
1291         local src link linkdir _me
1292         src="$1"
1293         link="$2"
1294         linkdir="`dirname $link`"
1295         _me="make_symlink()"
1296
1297         if [ -z "$src" -o -z "$link" ]; then
1298                 warn "$_me: requires two arguments."
1299                 return 1
1300         fi
1301         if [ ! -d "$linkdir" ]; then
1302                 warn "$_me: the directory $linkdir does not exist."
1303                 return 1
1304         fi
1305         if ! ln -sf $src $link; then
1306                 warn "$_me: unable to make a symbolic link from $link to $src"
1307                 return 1
1308         fi
1309         return 0
1310 }
1311
1312 # devfs_rulesets_from_file file
1313 #       Reads a set of devfs commands from file, and creates
1314 #       the specified rulesets with their rules. Returns non-zero
1315 #       if there was an error.
1316 #
1317 devfs_rulesets_from_file()
1318 {
1319         local file _err _me
1320         file="$1"
1321         _me="devfs_rulesets_from_file"
1322         _err=0
1323
1324         if [ -z "$file" ]; then
1325                 warn "$_me: you must specify a file"
1326                 return 1
1327         fi
1328         if [ ! -e "$file" ]; then
1329                 debug "$_me: no such file ($file)"
1330                 return 0
1331         fi
1332         debug "reading rulesets from file ($file)"
1333         { while read line
1334         do
1335                 case $line in
1336                 \#*)
1337                         continue
1338                         ;;
1339                 \[*\]*)
1340                         rulenum=`expr "$line" : "\[.*=\([0-9]*\)\]"`
1341                         if [ -z "$rulenum" ]; then
1342                                 warn "$_me: cannot extract rule number ($line)"
1343                                 _err=1
1344                                 break
1345                         fi
1346                         rulename=`expr "$line" : "\[\(.*\)=[0-9]*\]"`
1347                         if [ -z "$rulename" ]; then
1348                                 warn "$_me: cannot extract rule name ($line)"
1349                                 _err=1
1350                                 break;
1351                         fi
1352                         eval $rulename=\$rulenum
1353                         debug "found ruleset: $rulename=$rulenum"
1354                         if ! /sbin/devfs rule -s $rulenum delset; then
1355                                 _err=1
1356                                 break
1357                         fi
1358                         ;;
1359                 *)
1360                         rulecmd="${line%%"\#*"}"
1361                         # evaluate the command incase it includes
1362                         # other rules
1363                         if [ -n "$rulecmd" ]; then
1364                                 debug "adding rule ($rulecmd)"
1365                                 if ! eval /sbin/devfs rule -s $rulenum $rulecmd
1366                                 then
1367                                         _err=1
1368                                         break
1369                                 fi
1370                         fi
1371                         ;;
1372                 esac
1373                 if [ $_err -ne 0 ]; then
1374                         debug "error in $_me"
1375                         break
1376                 fi
1377         done } < $file
1378         return $_err
1379 }
1380
1381 # devfs_init_rulesets
1382 #       Initializes rulesets from configuration files. Returns
1383 #       non-zero if there was an error.
1384 #
1385 devfs_init_rulesets()
1386 {
1387         local file _me
1388         _me="devfs_init_rulesets"
1389
1390         # Go through this only once
1391         if [ -n "$devfs_rulesets_init" ]; then
1392                 debug "$_me: devfs rulesets already initialized"
1393                 return
1394         fi
1395         for file in $devfs_rulesets; do
1396                 if ! devfs_rulesets_from_file $file; then
1397                         warn "$_me: could not read rules from $file"
1398                         return 1
1399                 fi
1400         done
1401         devfs_rulesets_init=1
1402         debug "$_me: devfs rulesets initialized"
1403         return 0
1404 }
1405
1406 # devfs_set_ruleset ruleset [dir]
1407 #       Sets the default ruleset of dir to ruleset. The ruleset argument
1408 #       must be a ruleset name as specified in devfs.rules(5) file.
1409 #       Returns non-zero if it could not set it successfully.
1410 #
1411 devfs_set_ruleset()
1412 {
1413         local devdir rs _me
1414         [ -n "$1" ] && eval rs=\$$1 || rs=
1415         [ -n "$2" ] && devdir="-m "$2"" || devdir=
1416         _me="devfs_set_ruleset"
1417
1418         if [ -z "$rs" ]; then
1419                 warn "$_me: you must specify a ruleset number"
1420                 return 1
1421         fi
1422         debug "$_me: setting ruleset ($rs) on mount-point (${devdir#-m })"
1423         if ! /sbin/devfs $devdir ruleset $rs; then
1424                 warn "$_me: unable to set ruleset $rs to ${devdir#-m }"
1425                 return 1
1426         fi
1427         return 0
1428 }
1429
1430 # devfs_apply_ruleset ruleset [dir]
1431 #       Apply ruleset number $ruleset to the devfs mountpoint $dir.
1432 #       The ruleset argument must be a ruleset name as specified
1433 #       in a devfs.rules(5) file.  Returns 0 on success or non-zero
1434 #       if it could not apply the ruleset.
1435 #
1436 devfs_apply_ruleset()
1437 {
1438         local devdir rs _me
1439         [ -n "$1" ] && eval rs=\$$1 || rs=
1440         [ -n "$2" ] && devdir="-m "$2"" || devdir=
1441         _me="devfs_apply_ruleset"
1442
1443         if [ -z "$rs" ]; then
1444                 warn "$_me: you must specify a ruleset"
1445                 return 1
1446         fi
1447         debug "$_me: applying ruleset ($rs) to mount-point (${devdir#-m })"
1448         if ! /sbin/devfs $devdir rule -s $rs applyset; then
1449                 warn "$_me: unable to apply ruleset $rs to ${devdir#-m }"
1450                 return 1
1451         fi
1452         return 0
1453 }
1454
1455 # devfs_domount dir [ruleset]
1456 #       Mount devfs on dir. If ruleset is specified it is set
1457 #       on the mount-point. It must also be a ruleset name as specified
1458 #       in a devfs.rules(5) file. Returns 0 on success.
1459 #
1460 devfs_domount()
1461 {
1462         local devdir rs _me
1463         devdir="$1"
1464         [ -n "$2" ] && rs=$2 || rs=
1465         _me="devfs_domount()"
1466
1467         if [ -z "$devdir" ]; then
1468                 warn "$_me: you must specify a mount-point"
1469                 return 1
1470         fi
1471         debug "$_me: mount-point is ($devdir), ruleset is ($rs)"
1472         if ! mount -t devfs dev "$devdir"; then
1473                 warn "$_me: Unable to mount devfs on $devdir"
1474                 return 1
1475         fi
1476         if [ -n "$rs" ]; then
1477                 devfs_init_rulesets
1478                 devfs_set_ruleset $rs $devdir
1479                 devfs -m $devdir rule applyset
1480         fi
1481         return 0
1482 }
1483
1484 # devfs_mount_jail dir [ruleset]
1485 #       Mounts a devfs file system appropriate for jails
1486 #       on the directory dir. If ruleset is specified, the ruleset
1487 #       it names will be used instead.  If present, ruleset must
1488 #       be the name of a ruleset as defined in a devfs.rules(5) file.
1489 #       This function returns non-zero if an error occurs.
1490 #
1491 devfs_mount_jail()
1492 {
1493         local jdev rs _me
1494         jdev="$1"
1495         [ -n "$2" ] && rs=$2 || rs="devfsrules_jail"
1496         _me="devfs_mount_jail"
1497
1498         devfs_init_rulesets
1499         if ! devfs_domount "$jdev" $rs; then
1500                 warn "$_me: devfs was not mounted on $jdev"
1501                 return 1
1502         fi
1503         return 0
1504 }
1505
1506 # Provide a function for normalizing the mounting of memory
1507 # filesystems.  This should allow the rest of the code here to remain
1508 # as close as possible between 5-current and 4-stable.
1509 #   $1 = size
1510 #   $2 = mount point
1511 #   $3 = (optional) extra mdmfs flags
1512 mount_md()
1513 {
1514         if [ -n "$3" ]; then
1515                 flags="$3"
1516         fi
1517         /sbin/mdmfs $flags -s $1 md $2
1518 }
1519
1520 # Code common to scripts that need to load a kernel module
1521 # if it isn't in the kernel yet. Syntax:
1522 #   load_kld [-e regex] [-m module] file
1523 # where -e or -m chooses the way to check if the module
1524 # is already loaded:
1525 #   regex is egrep'd in the output from `kldstat -v',
1526 #   module is passed to `kldstat -m'.
1527 # The default way is as though `-m file' were specified.
1528 load_kld()
1529 {
1530         local _loaded _mod _opt _re
1531
1532         while getopts "e:m:" _opt; do
1533                 case "$_opt" in
1534                 e) _re="$OPTARG" ;;
1535                 m) _mod="$OPTARG" ;;
1536                 *) err 3 'USAGE: load_kld [-e regex] [-m module] file' ;;
1537                 esac
1538         done
1539         shift $(($OPTIND - 1))
1540         if [ $# -ne 1 ]; then
1541                 err 3 'USAGE: load_kld [-e regex] [-m module] file'
1542         fi
1543         _mod=${_mod:-$1}
1544         _loaded=false
1545         if [ -n "$_re" ]; then
1546                 if kldstat -v | egrep -q -e "$_re"; then
1547                         _loaded=true
1548                 fi
1549         else
1550                 if kldstat -q -m "$_mod"; then
1551                         _loaded=true
1552                 fi
1553         fi
1554         if ! $_loaded; then
1555                 if ! kldload "$1"; then
1556                         warn "Unable to load kernel module $1"
1557                         return 1
1558                 else
1559                         info "$1 kernel module loaded."
1560                 fi
1561         else
1562                 debug "load_kld: $1 kernel module already loaded."
1563         fi
1564         return 0
1565 }
1566
1567 # ltr str src dst
1568 #       Change every $src in $str to $dst.
1569 #       Useful when /usr is not yet mounted and we cannot use tr(1), sed(1) nor
1570 #       awk(1).
1571 ltr()
1572 {
1573         local _str _src _dst _out _com
1574         _str=$1
1575         _src=$2
1576         _dst=$3
1577         _out=""
1578
1579         IFS=${_src}
1580         for _com in ${_str}; do
1581                 if [ -z "${_out}" ]; then
1582                         _out="${_com}"
1583                 else
1584                         _out="${_out}${_dst}${_com}"
1585                 fi
1586         done
1587         echo "${_out}"
1588 }
1589
1590 # Creates a list of providers for GELI encryption.
1591 geli_make_list()
1592 {
1593         local devices devices2
1594         local provider mountpoint type options rest
1595
1596         # Create list of GELI providers from fstab.
1597         while read provider mountpoint type options rest ; do
1598                 case ":${options}" in
1599                 :*noauto*)
1600                         noauto=yes
1601                         ;;
1602                 *)
1603                         noauto=no
1604                         ;;
1605                 esac
1606
1607                 case ":${provider}" in
1608                 :#*)
1609                         continue
1610                         ;;
1611                 *.eli)
1612                         # Skip swap devices.
1613                         if [ "${type}" = "swap" -o "${options}" = "sw" -o "${noauto}" = "yes" ]; then
1614                                 continue
1615                         fi
1616                         devices="${devices} ${provider}"
1617                         ;;
1618                 esac
1619         done < /etc/fstab
1620
1621         # Append providers from geli_devices.
1622         devices="${devices} ${geli_devices}"
1623
1624         for provider in ${devices}; do
1625                 provider=${provider%.eli}
1626                 provider=${provider#/dev/}
1627                 devices2="${devices2} ${provider}"
1628         done
1629
1630         echo ${devices2}
1631 }
1632
1633 # Find scripts in local_startup directories that use the old syntax
1634 #
1635 find_local_scripts_old () {
1636         zlist=''
1637         slist=''
1638         for dir in ${local_startup}; do
1639                 if [ -d "${dir}" ]; then
1640                         for file in ${dir}/[0-9]*.sh; do
1641                                 grep '^# PROVIDE:' $file >/dev/null 2>&1 &&
1642                                     continue
1643                                 zlist="$zlist $file"
1644                         done
1645                         for file in ${dir}/[^0-9]*.sh; do
1646                                 grep '^# PROVIDE:' $file >/dev/null 2>&1 &&
1647                                     continue
1648                                 slist="$slist $file"
1649                         done
1650                 fi
1651         done
1652 }
1653
1654 find_local_scripts_new () {
1655         local_rc=''
1656         for dir in ${local_startup}; do
1657                 if [ -d "${dir}" ]; then
1658                         for file in `grep -l '^# PROVIDE:' ${dir}/* 2>/dev/null`; do
1659                                 case "$file" in
1660                                 *.sample) ;;
1661                                 *)      if [ -x "$file" ]; then
1662                                                 local_rc="${local_rc} ${file}"
1663                                         fi
1664                                         ;;
1665                                 esac
1666                         done
1667                 fi
1668         done
1669 }
1670
1671 # check_required_{before|after} command
1672 #       Check for things required by the command before and after its precmd,
1673 #       respectively.  The two separate functions are needed because some
1674 #       conditions should prevent precmd from being run while other things
1675 #       depend on precmd having already been run.
1676 #
1677 check_required_before()
1678 {
1679         local _f
1680
1681         case "$1" in
1682         start)
1683                 for _f in $required_vars; do
1684                         if ! checkyesno $_f; then
1685                                 warn "\$${_f} is not enabled."
1686                                 if [ -z "$rc_force" ]; then
1687                                         return 1
1688                                 fi
1689                         fi
1690                 done
1691
1692                 for _f in $required_dirs; do
1693                         if [ ! -d "${_f}/." ]; then
1694                                 warn "${_f} is not a directory."
1695                                 if [ -z "$rc_force" ]; then
1696                                         return 1
1697                                 fi
1698                         fi
1699                 done
1700
1701                 for _f in $required_files; do
1702                         if [ ! -r "${_f}" ]; then
1703                                 warn "${_f} is not readable."
1704                                 if [ -z "$rc_force" ]; then
1705                                         return 1
1706                                 fi
1707                         fi
1708                 done
1709                 ;;
1710         esac
1711
1712         return 0
1713 }
1714
1715 check_required_after()
1716 {
1717         local _f _args
1718
1719         case "$1" in
1720         start)
1721                 for _f in $required_modules; do
1722                         case "${_f}" in
1723                                 *~*)    _args="-e ${_f#*~} ${_f%%~*}" ;;
1724                                 *:*)    _args="-m ${_f#*:} ${_f%%:*}" ;;
1725                                 *)      _args="${_f}" ;;
1726                         esac
1727                         if ! load_kld ${_args}; then
1728                                 if [ -z "$rc_force" ]; then
1729                                         return 1
1730                                 fi
1731                         fi
1732                 done
1733                 ;;
1734         esac
1735
1736         return 0
1737 }
1738
1739 fi
1740
1741 _rc_subr_loaded=: