2 .\" Copyright (c) 1998, 2000
3 .\" Justin T. Gibbs. All rights reserved.
5 .\" Redistribution and use in source and binary forms, with or without
6 .\" modification, are permitted provided that the following conditions
8 .\" 1. Redistributions of source code must retain the above copyright
9 .\" notice, this list of conditions and the following disclaimer.
10 .\" 2. The name of the author may not be used to endorse or promote products
11 .\" derived from this software without specific prior written permission.
13 .\" THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
14 .\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
15 .\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
16 .\" IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
17 .\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
18 .\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
19 .\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
20 .\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
21 .\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
22 .\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
31 .Nd Advansys ISA/VL/EISA/PCI 8bit SCSI Host adapter driver
33 To compile this driver into the kernel,
34 place the following lines in your
35 kernel configuration file:
36 .Bd -ragged -offset indent
40 For one or more EISA cards:
43 For one or more VL/ISA cards:
47 .Pa /boot/device.hints :
48 .Cd hint.adv.0.at="isa"
50 For one or more PCI cards:
54 This driver provides access to the 8bit
56 bus connected to the Advanced Systems Products, Inc.
66 The following tables list the AdvanSys products using these chips,
67 their bus attachment type, maximum sync rate, and the maximum number of
68 commands that can be handled by the adapter concurrently.
70 .Bd -ragged -offset indent
71 .Bl -column "ABP510/5150 " "ISA PnP " "Yes " "10MHz " "Commands " Footnotes
72 Connectivity Products:
74 .Em "Adapter Bus Floppy MaxSync Commands Footnotes"
75 ABP510/5150 ISA No 10MHz 240 1
76 ABP5140 ISA PnP No 10MHz 16 1, 3
77 ABP5142 ISA PnP Yes 10MHz 16 4
78 ABP[3]902 PCI No 10MHz 16
79 ABP3905 PCI No 10MHz 16
80 ABP915 PCI No 10MHz 16
81 ABP920 PCI No 10MHz 16
82 ABP3922 PCI No 10MHz 16
83 ABP3925 PCI No 10MHz 16
84 ABP930 PCI No 10MHz 16 5
85 ABP930U PCI No 20MHz 16
86 ABP930UA PCI No 20MHz 16
87 ABP960 PCI No 10MHz 16
88 ABP960U PCI No 20MHz 16
94 This board has been shipped by HP with the 4020i CD-R drive.
95 The board has no BIOS so it cannot control a boot device, but
96 it can control any secondary SCSI device.
98 This board has been sold by Iomega as a Jaz Jet PCI adapter.
100 This board has been sold by SIIG as the i540 SpeedMaster.
102 This board has been sold by SIIG as the i542 SpeedMaster.
104 This board has been sold by SIIG as the Fast SCSI Pro PCI.
108 .Bd -ragged -offset indent
109 .Bl -column "ABP510/5150 " "ISA PnP " "Yes " "10MHz " Commands
110 Single Channel Products:
112 .Em "Adapter Bus Floppy MaxSync Commands"
113 ABP542 ISA Yes 10MHz 240
114 ABP742 EISA Yes 10MHz 240
115 ABP842 VL Yes 10MHz 240
116 ABP940 PCI No 10MHz 240
117 ABP[3]940UA PCI No 20MHz 240
118 ABP940U PCI No 20MHz 240
119 ABP3960UA PCI No 20MHz 240
120 ABP970 PCI No 10MHz 240
121 ABP970U PCI No 20MHz 240
125 .Bd -ragged -offset indent
126 .Bl -column "ABP510/5150 " "ISA PnP " "Yes " "10MHz " "Commands " "Channels "
127 Multi Channel Products (Commands are per-channel):
129 .Em "Adapter Bus Floppy MaxSync Commands Channels"
130 ABP752 EISA Yes 10MHz 240 2
131 ABP852 VL Yes 10MHz 240 2
132 ABP950 PCI No 10MHz 240 2
133 ABP980 PCI No 10MHz 240 4
134 ABP980U PCI No 20MHz 240 4
135 ABP[3]980UA PCI No 20MHz 16 4
139 .\" For ISA or Vesa Local Bus adapters, one kernel config entry is required
140 .\" for every card to be attached by the system. Specific values for the port
141 .\" address, irq, and drq may be specified. If wildcard values are used, the
142 .\" driver will query the device for its current settings and use those. If
143 .\" the port address is a wildcard, the driver consults an internal table of
144 .\" possible port address locations and attaches to the first unattached card
145 .\" it finds. The possible port addresses for these card are 0x110, 0x130,
146 .\" 0x150, 0x190, 0x210, 0x230, 0x250, and 0x330.
148 Per target configuration performed in the
150 menu, which is accessible at boot,
151 is honored by this driver.
152 This includes synchronous/asynchronous transfers,
153 maximum synchronous negotiation rate, disconnection, tagged queueing,
154 and the host adapter's SCSI ID.
155 The global setting for the maximum number of tagged transactions allowed
156 per target is not honored as the CAM SCSI system will automatically determine
157 the maximum number of tags a device can receive as well as guarantee fair
158 resource allocation among devices.
162 driver supports the following SCSI controllers:
184 AdvanSys ABP930, ABP930U, ABP930UA
186 AdvanSys ABP960, ABP960U
196 AdvanSys ABP940UA/3940UA
202 AdvanSys ABP970, ABP970U
210 AdvanSys ABP980, ABP980U
212 AdvanSys ABP980UA/3980UA
214 MELCO IFC-USP (PC-98)
216 RATOC REX-PCI30 (PC-98)
218 @Nifty FNECHARD IFC-USUP-TX (PC-98)
240 from the Linux driver
243 of Advanced System Products, Inc.
244 Many thanks to AdvanSys for providing the original driver under a suitable