2 * Copyright (c) 2003-2007 Nate Lawson
3 * Copyright (c) 2000 Michael Smith
4 * Copyright (c) 2000 BSDi
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/kernel.h>
37 #include <sys/malloc.h>
38 #include <sys/module.h>
41 #include <machine/bus.h>
42 #include <machine/resource.h>
45 #include <contrib/dev/acpica/include/acpi.h>
46 #include <contrib/dev/acpica/include/accommon.h>
48 #include <dev/acpica/acpivar.h>
50 /* Hooks for the ACPI CA debugging infrastructure */
51 #define _COMPONENT ACPI_EC
52 ACPI_MODULE_NAME("EC")
58 typedef UINT8 EC_COMMAND;
60 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00)
61 #define EC_COMMAND_READ ((EC_COMMAND) 0x80)
62 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81)
63 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82)
64 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83)
65 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84)
70 * The encoding of the EC status register is illustrated below.
71 * Note that a set bit (1) indicates the property is TRUE
72 * (e.g. if bit 0 is set then the output buffer is full).
77 * | | | | | | | +- Output Buffer Full?
78 * | | | | | | +--- Input Buffer Full?
79 * | | | | | +----- <reserved>
80 * | | | | +------- Data Register is Command Byte?
81 * | | | +--------- Burst Mode Enabled?
82 * | | +----------- SCI Event?
83 * | +------------- SMI Event?
84 * +--------------- <reserved>
87 typedef UINT8 EC_STATUS;
89 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01)
90 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02)
91 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08)
92 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10)
98 typedef UINT8 EC_EVENT;
100 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00)
101 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01)
102 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02)
103 #define EC_EVENT_SCI ((EC_EVENT) 0x20)
104 #define EC_EVENT_SMI ((EC_EVENT) 0x40)
106 /* Data byte returned after burst enable indicating it was successful. */
107 #define EC_BURST_ACK 0x90
110 * Register access primitives
112 #define EC_GET_DATA(sc) \
113 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0)
115 #define EC_SET_DATA(sc, v) \
116 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v))
118 #define EC_GET_CSR(sc) \
119 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0)
121 #define EC_SET_CSR(sc, v) \
122 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v))
124 /* Additional params to pass from the probe routine */
125 struct acpi_ec_params {
128 ACPI_HANDLE gpe_handle;
132 /* Indicate that this device has already been probed via ECDT. */
133 #define DEV_ECDT(x) (acpi_get_magic(x) == (uintptr_t)&acpi_ec_devclass)
138 struct acpi_ec_softc {
140 ACPI_HANDLE ec_handle;
142 ACPI_HANDLE ec_gpehandle;
146 struct resource *ec_data_res;
147 bus_space_tag_t ec_data_tag;
148 bus_space_handle_t ec_data_handle;
151 struct resource *ec_csr_res;
152 bus_space_tag_t ec_csr_tag;
153 bus_space_handle_t ec_csr_handle;
165 * I couldn't find it in the spec but other implementations also use a
166 * value of 1 ms for the time to acquire global lock.
168 #define EC_LOCK_TIMEOUT 1000
170 /* Default delay in microseconds between each run of the status polling loop. */
171 #define EC_POLL_DELAY 5
173 /* Total time in ms spent waiting for a response from EC. */
174 #define EC_TIMEOUT 750
176 #define EVENT_READY(event, status) \
177 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \
178 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \
179 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \
180 ((status) & EC_FLAG_INPUT_BUFFER) == 0))
182 ACPI_SERIAL_DECL(ec, "ACPI embedded controller");
184 SYSCTL_DECL(_debug_acpi);
185 SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging");
187 static int ec_burst_mode;
188 TUNABLE_INT("debug.acpi.ec.burst", &ec_burst_mode);
189 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RW, &ec_burst_mode, 0,
190 "Enable use of burst mode (faster for nearly all systems)");
191 static int ec_polled_mode;
192 TUNABLE_INT("debug.acpi.ec.polled", &ec_polled_mode);
193 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RW, &ec_polled_mode, 0,
194 "Force use of polled mode (only if interrupt mode doesn't work)");
195 static int ec_timeout = EC_TIMEOUT;
196 TUNABLE_INT("debug.acpi.ec.timeout", &ec_timeout);
197 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RW, &ec_timeout,
198 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)");
201 EcLock(struct acpi_ec_softc *sc)
205 /* If _GLK is non-zero, acquire the global lock. */
208 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle);
209 if (ACPI_FAILURE(status))
212 ACPI_SERIAL_BEGIN(ec);
217 EcUnlock(struct acpi_ec_softc *sc)
221 AcpiReleaseGlobalLock(sc->ec_glkhandle);
224 static uint32_t EcGpeHandler(void *Context);
225 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function,
226 void *Context, void **return_Context);
227 static ACPI_STATUS EcSpaceHandler(UINT32 Function,
228 ACPI_PHYSICAL_ADDRESS Address,
229 UINT32 width, ACPI_INTEGER *Value,
230 void *Context, void *RegionContext);
231 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event,
233 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd);
234 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address,
236 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address,
238 static int acpi_ec_probe(device_t dev);
239 static int acpi_ec_attach(device_t dev);
240 static int acpi_ec_suspend(device_t dev);
241 static int acpi_ec_resume(device_t dev);
242 static int acpi_ec_shutdown(device_t dev);
243 static int acpi_ec_read_method(device_t dev, u_int addr,
244 ACPI_INTEGER *val, int width);
245 static int acpi_ec_write_method(device_t dev, u_int addr,
246 ACPI_INTEGER val, int width);
248 static device_method_t acpi_ec_methods[] = {
249 /* Device interface */
250 DEVMETHOD(device_probe, acpi_ec_probe),
251 DEVMETHOD(device_attach, acpi_ec_attach),
252 DEVMETHOD(device_suspend, acpi_ec_suspend),
253 DEVMETHOD(device_resume, acpi_ec_resume),
254 DEVMETHOD(device_shutdown, acpi_ec_shutdown),
256 /* Embedded controller interface */
257 DEVMETHOD(acpi_ec_read, acpi_ec_read_method),
258 DEVMETHOD(acpi_ec_write, acpi_ec_write_method),
263 static driver_t acpi_ec_driver = {
266 sizeof(struct acpi_ec_softc),
269 static devclass_t acpi_ec_devclass;
270 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, 0, 0);
271 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1);
274 * Look for an ECDT and if we find one, set up default GPE and
275 * space handlers to catch attempts to access EC space before
276 * we have a real driver instance in place.
278 * TODO: Some old Gateway laptops need us to fake up an ECDT or
279 * otherwise attach early so that _REG methods can run.
282 acpi_ec_ecdt_probe(device_t parent)
284 ACPI_TABLE_ECDT *ecdt;
288 struct acpi_ec_params *params;
290 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
292 /* Find and validate the ECDT. */
293 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt);
294 if (ACPI_FAILURE(status) ||
295 ecdt->Control.BitWidth != 8 ||
296 ecdt->Data.BitWidth != 8) {
300 /* Create the child device with the given unit number. */
301 child = BUS_ADD_CHILD(parent, 0, "acpi_ec", ecdt->Uid);
303 printf("%s: can't add child\n", __func__);
307 /* Find and save the ACPI handle for this device. */
308 status = AcpiGetHandle(NULL, ecdt->Id, &h);
309 if (ACPI_FAILURE(status)) {
310 device_delete_child(parent, child);
311 printf("%s: can't get handle\n", __func__);
314 acpi_set_handle(child, h);
316 /* Set the data and CSR register addresses. */
317 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address,
319 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address,
323 * Store values for the probe/attach routines to use. Store the
324 * ECDT GPE bit and set the global lock flag according to _GLK.
325 * Note that it is not perfectly correct to be evaluating a method
326 * before initializing devices, but in practice this function
327 * should be safe to call at this point.
329 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO);
330 params->gpe_handle = NULL;
331 params->gpe_bit = ecdt->Gpe;
332 params->uid = ecdt->Uid;
333 acpi_GetInteger(h, "_GLK", ¶ms->glk);
334 acpi_set_private(child, params);
335 acpi_set_magic(child, (uintptr_t)&acpi_ec_devclass);
337 /* Finish the attach process. */
338 if (device_probe_and_attach(child) != 0)
339 device_delete_child(parent, child);
343 acpi_ec_probe(device_t dev)
352 struct acpi_ec_params *params;
353 static char *ec_ids[] = { "PNP0C09", NULL };
355 /* Check that this is a device and that EC is not disabled. */
356 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec"))
360 * If probed via ECDT, set description and continue. Otherwise,
361 * we can access the namespace and make sure this is not a
367 buf.Length = ACPI_ALLOCATE_BUFFER;
369 params = acpi_get_private(dev);
371 } else if (!acpi_disabled("ec") &&
372 ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids)) {
373 params = malloc(sizeof(struct acpi_ec_params), M_TEMP,
375 h = acpi_get_handle(dev);
378 * Read the unit ID to check for duplicate attach and the
379 * global lock value to see if we should acquire it when
382 status = acpi_GetInteger(h, "_UID", ¶ms->uid);
383 if (ACPI_FAILURE(status))
385 status = acpi_GetInteger(h, "_GLK", ¶ms->glk);
386 if (ACPI_FAILURE(status))
390 * Evaluate the _GPE method to find the GPE bit used by the EC to
391 * signal status (SCI). If it's a package, it contains a reference
392 * and GPE bit, similar to _PRW.
394 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf);
395 if (ACPI_FAILURE(status)) {
396 device_printf(dev, "can't evaluate _GPE - %s\n",
397 AcpiFormatException(status));
400 obj = (ACPI_OBJECT *)buf.Pointer;
405 case ACPI_TYPE_INTEGER:
406 params->gpe_handle = NULL;
407 params->gpe_bit = obj->Integer.Value;
409 case ACPI_TYPE_PACKAGE:
410 if (!ACPI_PKG_VALID(obj, 2))
413 acpi_GetReference(NULL, &obj->Package.Elements[0]);
414 if (params->gpe_handle == NULL ||
415 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0)
419 device_printf(dev, "_GPE has invalid type %d\n", obj->Type);
423 /* Store the values we got from the namespace for attach. */
424 acpi_set_private(dev, params);
427 * Check for a duplicate probe. This can happen when a probe
428 * via ECDT succeeded already. If this is a duplicate, disable
431 peer = devclass_get_device(acpi_ec_devclass, params->uid);
432 if (peer == NULL || !device_is_alive(peer))
440 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s",
441 params->gpe_bit, (params->glk) ? ", GLK" : "",
442 DEV_ECDT(dev) ? ", ECDT" : "");
443 device_set_desc_copy(dev, desc);
446 if (ret > 0 && params)
447 free(params, M_TEMP);
449 AcpiOsFree(buf.Pointer);
454 acpi_ec_attach(device_t dev)
456 struct acpi_ec_softc *sc;
457 struct acpi_ec_params *params;
460 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
462 /* Fetch/initialize softc (assumes softc is pre-zeroed). */
463 sc = device_get_softc(dev);
464 params = acpi_get_private(dev);
466 sc->ec_handle = acpi_get_handle(dev);
468 /* Retrieve previously probed values via device ivars. */
469 sc->ec_glk = params->glk;
470 sc->ec_gpebit = params->gpe_bit;
471 sc->ec_gpehandle = params->gpe_handle;
472 sc->ec_uid = params->uid;
473 sc->ec_suspending = FALSE;
474 free(params, M_TEMP);
476 /* Attach bus resources for data and command/status ports. */
478 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
479 &sc->ec_data_rid, RF_ACTIVE);
480 if (sc->ec_data_res == NULL) {
481 device_printf(dev, "can't allocate data port\n");
484 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res);
485 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res);
488 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
489 &sc->ec_csr_rid, RF_ACTIVE);
490 if (sc->ec_csr_res == NULL) {
491 device_printf(dev, "can't allocate command/status port\n");
494 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res);
495 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res);
498 * Install a handler for this EC's GPE bit. We want edge-triggered
501 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n"));
502 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit,
503 ACPI_GPE_EDGE_TRIGGERED, &EcGpeHandler, sc);
504 if (ACPI_FAILURE(Status)) {
505 device_printf(dev, "can't install GPE handler for %s - %s\n",
506 acpi_name(sc->ec_handle), AcpiFormatException(Status));
511 * Install address space handler
513 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n"));
514 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
515 &EcSpaceHandler, &EcSpaceSetup, sc);
516 if (ACPI_FAILURE(Status)) {
517 device_printf(dev, "can't install address space handler for %s - %s\n",
518 acpi_name(sc->ec_handle), AcpiFormatException(Status));
522 /* Enable runtime GPEs for the handler. */
523 Status = AcpiSetGpeType(sc->ec_gpehandle, sc->ec_gpebit,
524 ACPI_GPE_TYPE_RUNTIME);
525 if (ACPI_FAILURE(Status)) {
526 device_printf(dev, "AcpiSetGpeType failed: %s\n",
527 AcpiFormatException(Status));
530 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_NOT_ISR);
531 if (ACPI_FAILURE(Status)) {
532 device_printf(dev, "AcpiEnableGpe failed: %s\n",
533 AcpiFormatException(Status));
537 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n"));
541 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, &EcGpeHandler);
542 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
545 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid,
548 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid,
554 acpi_ec_suspend(device_t dev)
556 struct acpi_ec_softc *sc;
558 sc = device_get_softc(dev);
559 sc->ec_suspending = TRUE;
564 acpi_ec_resume(device_t dev)
566 struct acpi_ec_softc *sc;
568 sc = device_get_softc(dev);
569 sc->ec_suspending = FALSE;
574 acpi_ec_shutdown(device_t dev)
576 struct acpi_ec_softc *sc;
578 /* Disable the GPE so we don't get EC events during shutdown. */
579 sc = device_get_softc(dev);
580 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit, ACPI_NOT_ISR);
584 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */
586 acpi_ec_read_method(device_t dev, u_int addr, ACPI_INTEGER *val, int width)
588 struct acpi_ec_softc *sc;
591 sc = device_get_softc(dev);
592 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL);
593 if (ACPI_FAILURE(status))
599 acpi_ec_write_method(device_t dev, u_int addr, ACPI_INTEGER val, int width)
601 struct acpi_ec_softc *sc;
604 sc = device_get_softc(dev);
605 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL);
606 if (ACPI_FAILURE(status))
612 EcGpeQueryHandler(void *Context)
614 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
619 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
620 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL"));
622 /* Serialize user access with EcSpaceHandler(). */
624 if (ACPI_FAILURE(Status)) {
625 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n",
626 AcpiFormatException(Status));
631 * Send a query command to the EC to find out which _Qxx call it
632 * wants to make. This command clears the SCI bit and also the
633 * interrupt source since we are edge-triggered. To prevent the GPE
634 * that may arise from running the query from causing another query
635 * to be queued, we clear the pending flag only after running it.
637 Status = EcCommand(sc, EC_COMMAND_QUERY);
638 sc->ec_sci_pend = FALSE;
639 if (ACPI_FAILURE(Status)) {
641 device_printf(sc->ec_dev, "GPE query failed: %s\n",
642 AcpiFormatException(Status));
645 Data = EC_GET_DATA(sc);
648 * We have to unlock before running the _Qxx method below since that
649 * method may attempt to read/write from EC address space, causing
650 * recursive acquisition of the lock.
654 /* Ignore the value for "no outstanding event". (13.3.5) */
655 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data);
659 /* Evaluate _Qxx to respond to the controller. */
660 snprintf(qxx, sizeof(qxx), "_Q%02X", Data);
662 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL);
663 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) {
664 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n",
665 qxx, AcpiFormatException(Status));
670 * The GPE handler is called when IBE/OBF or SCI events occur. We are
671 * called from an unknown lock context.
674 EcGpeHandler(void *Context)
676 struct acpi_ec_softc *sc = Context;
680 KASSERT(Context != NULL, ("EcGpeHandler called with NULL"));
681 CTR0(KTR_ACPI, "ec gpe handler start");
684 * Notify EcWaitEvent() that the status register is now fresh. If we
685 * didn't do this, it wouldn't be possible to distinguish an old IBE
686 * from a new one, for example when doing a write transaction (writing
687 * address and then data values.)
689 atomic_add_int(&sc->ec_gencount, 1);
690 wakeup(&sc->ec_gencount);
693 * If the EC_SCI bit of the status register is set, queue a query handler.
694 * It will run the query and _Qxx method later, under the lock.
696 EcStatus = EC_GET_CSR(sc);
697 if ((EcStatus & EC_EVENT_SCI) && !sc->ec_sci_pend) {
698 CTR0(KTR_ACPI, "ec gpe queueing query handler");
699 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context);
700 if (ACPI_SUCCESS(Status))
701 sc->ec_sci_pend = TRUE;
703 printf("EcGpeHandler: queuing GPE query handler failed\n");
709 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context,
710 void **RegionContext)
713 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
716 * If deactivating a region, always set the output to NULL. Otherwise,
717 * just pass the context through.
719 if (Function == ACPI_REGION_DEACTIVATE)
720 *RegionContext = NULL;
722 *RegionContext = Context;
724 return_ACPI_STATUS (AE_OK);
728 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 width,
729 ACPI_INTEGER *Value, void *Context, void *RegionContext)
731 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
733 UINT8 EcAddr, EcData;
736 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address);
738 if (width % 8 != 0 || Value == NULL || Context == NULL)
739 return_ACPI_STATUS (AE_BAD_PARAMETER);
740 if (Address + (width / 8) - 1 > 0xFF)
741 return_ACPI_STATUS (AE_BAD_ADDRESS);
743 if (Function == ACPI_READ)
749 * If booting, check if we need to run the query handler. If so, we
750 * we call it directly here since our thread taskq is not active yet.
752 if (cold || rebooting || sc->ec_suspending) {
753 if ((EC_GET_CSR(sc) & EC_EVENT_SCI)) {
754 CTR0(KTR_ACPI, "ec running gpe handler directly");
755 EcGpeQueryHandler(sc);
759 /* Serialize with EcGpeQueryHandler() at transaction granularity. */
761 if (ACPI_FAILURE(Status))
762 return_ACPI_STATUS (Status);
764 /* Perform the transaction(s), based on width. */
765 for (i = 0; i < width; i += 8, EcAddr++) {
768 Status = EcRead(sc, EcAddr, &EcData);
769 if (ACPI_SUCCESS(Status))
770 *Value |= ((ACPI_INTEGER)EcData) << i;
773 EcData = (UINT8)((*Value) >> i);
774 Status = EcWrite(sc, EcAddr, &EcData);
777 device_printf(sc->ec_dev, "invalid EcSpaceHandler function %d\n",
779 Status = AE_BAD_PARAMETER;
782 if (ACPI_FAILURE(Status))
787 return_ACPI_STATUS (Status);
791 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event)
796 status = AE_NO_HARDWARE_RESPONSE;
797 ec_status = EC_GET_CSR(sc);
798 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) {
799 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg);
800 sc->ec_burstactive = FALSE;
802 if (EVENT_READY(event, ec_status)) {
803 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status);
810 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count)
813 int count, i, slp_ival;
815 ACPI_SERIAL_ASSERT(ec);
816 Status = AE_NO_HARDWARE_RESPONSE;
817 int need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending;
819 * The main CPU should be much faster than the EC. So the status should
820 * be "not ready" when we start waiting. But if the main CPU is really
821 * slow, it's possible we see the current "ready" response. Since that
822 * can't be distinguished from the previous response in polled mode,
823 * this is a potential issue. We really should have interrupts enabled
824 * during boot so there is no ambiguity in polled mode.
826 * If this occurs, we add an additional delay before actually entering
827 * the status checking loop, hopefully to allow the EC to go to work
828 * and produce a non-stale status.
833 if (EcCheckStatus(sc, "pre-check", Event) == AE_OK) {
835 device_printf(sc->ec_dev,
836 "warning: EC done before starting event wait\n");
843 /* Wait for event by polling or GPE (interrupt). */
845 count = (ec_timeout * 1000) / EC_POLL_DELAY;
848 for (i = 0; i < count; i++) {
849 Status = EcCheckStatus(sc, "poll", Event);
852 AcpiOsStall(EC_POLL_DELAY);
855 slp_ival = hz / 1000;
859 /* hz has less than 1 ms resolution so scale timeout. */
861 count = ec_timeout / (1000 / hz);
865 * Wait for the GPE to signal the status changed, checking the
866 * status register each time we get one. It's possible to get a
867 * GPE for an event we're not interested in here (i.e., SCI for
870 for (i = 0; i < count; i++) {
871 if (gen_count != sc->ec_gencount) {
873 * Record new generation count. It's possible the GPE was
874 * just to notify us that a query is needed and we need to
875 * wait for a second GPE to signal the completion of the
876 * event we are actually waiting for.
878 gen_count = sc->ec_gencount;
879 Status = EcCheckStatus(sc, "sleep", Event);
883 tsleep(&sc->ec_gencount, PZERO, "ecgpe", slp_ival);
887 * We finished waiting for the GPE and it never arrived. Try to
888 * read the register once and trust whatever value we got. This is
889 * the best we can do at this point. Then, force polled mode on
890 * since this system doesn't appear to generate GPEs.
892 if (Status != AE_OK) {
893 Status = EcCheckStatus(sc, "sleep_end", Event);
894 device_printf(sc->ec_dev,
895 "wait timed out (%sresponse), forcing polled mode\n",
896 Status == AE_OK ? "" : "no ");
897 ec_polled_mode = TRUE;
901 CTR0(KTR_ACPI, "error: ec wait timed out");
906 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd)
913 ACPI_SERIAL_ASSERT(ec);
915 /* Don't use burst mode if user disabled it. */
916 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE)
919 /* Decide what to wait for based on command type. */
921 case EC_COMMAND_READ:
922 case EC_COMMAND_WRITE:
923 case EC_COMMAND_BURST_DISABLE:
924 event = EC_EVENT_INPUT_BUFFER_EMPTY;
926 case EC_COMMAND_QUERY:
927 case EC_COMMAND_BURST_ENABLE:
928 event = EC_EVENT_OUTPUT_BUFFER_FULL;
931 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd);
932 return (AE_BAD_PARAMETER);
935 /* Run the command and wait for the chosen event. */
936 CTR1(KTR_ACPI, "ec running command %#x", cmd);
937 gen_count = sc->ec_gencount;
939 status = EcWaitEvent(sc, event, gen_count);
940 if (ACPI_SUCCESS(status)) {
941 /* If we succeeded, burst flag should now be present. */
942 if (cmd == EC_COMMAND_BURST_ENABLE) {
943 ec_status = EC_GET_CSR(sc);
944 if ((ec_status & EC_FLAG_BURST_MODE) == 0)
948 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd);
953 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data)
959 ACPI_SERIAL_ASSERT(ec);
960 CTR1(KTR_ACPI, "ec read from %#x", Address);
962 /* If we can't start burst mode, continue anyway. */
963 status = EcCommand(sc, EC_COMMAND_BURST_ENABLE);
964 if (status == AE_OK) {
965 data = EC_GET_DATA(sc);
966 if (data == EC_BURST_ACK) {
967 CTR0(KTR_ACPI, "ec burst enabled");
968 sc->ec_burstactive = TRUE;
972 status = EcCommand(sc, EC_COMMAND_READ);
973 if (ACPI_FAILURE(status))
976 gen_count = sc->ec_gencount;
977 EC_SET_DATA(sc, Address);
978 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count);
979 if (ACPI_FAILURE(status)) {
980 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n");
983 *Data = EC_GET_DATA(sc);
985 if (sc->ec_burstactive) {
986 sc->ec_burstactive = FALSE;
987 status = EcCommand(sc, EC_COMMAND_BURST_DISABLE);
988 if (ACPI_FAILURE(status))
990 CTR0(KTR_ACPI, "ec disabled burst ok");
997 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data)
1003 ACPI_SERIAL_ASSERT(ec);
1004 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, *Data);
1006 /* If we can't start burst mode, continue anyway. */
1007 status = EcCommand(sc, EC_COMMAND_BURST_ENABLE);
1008 if (status == AE_OK) {
1009 data = EC_GET_DATA(sc);
1010 if (data == EC_BURST_ACK) {
1011 CTR0(KTR_ACPI, "ec burst enabled");
1012 sc->ec_burstactive = TRUE;
1016 status = EcCommand(sc, EC_COMMAND_WRITE);
1017 if (ACPI_FAILURE(status))
1020 gen_count = sc->ec_gencount;
1021 EC_SET_DATA(sc, Address);
1022 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1023 if (ACPI_FAILURE(status)) {
1024 device_printf(sc->ec_dev, "EcRead: failed waiting for sent address\n");
1028 gen_count = sc->ec_gencount;
1029 EC_SET_DATA(sc, *Data);
1030 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1031 if (ACPI_FAILURE(status)) {
1032 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n");
1036 if (sc->ec_burstactive) {
1037 sc->ec_burstactive = FALSE;
1038 status = EcCommand(sc, EC_COMMAND_BURST_DISABLE);
1039 if (ACPI_FAILURE(status))
1041 CTR0(KTR_ACPI, "ec disabled burst ok");