2 /******************************************************************************
4 * Module Name: exprep - ACPI AML (p-code) execution - field prep utilities
6 *****************************************************************************/
9 * Copyright (C) 2000 - 2011, Intel Corp.
10 * All rights reserved.
12 * Redistribution and use in source and binary forms, with or without
13 * modification, are permitted provided that the following conditions
15 * 1. Redistributions of source code must retain the above copyright
16 * notice, this list of conditions, and the following disclaimer,
17 * without modification.
18 * 2. Redistributions in binary form must reproduce at minimum a disclaimer
19 * substantially similar to the "NO WARRANTY" disclaimer below
20 * ("Disclaimer") and any redistribution must be conditioned upon
21 * including a substantially similar Disclaimer requirement for further
22 * binary redistribution.
23 * 3. Neither the names of the above-listed copyright holders nor the names
24 * of any contributors may be used to endorse or promote products derived
25 * from this software without specific prior written permission.
27 * Alternatively, this software may be distributed under the terms of the
28 * GNU General Public License ("GPL") version 2 as published by the Free
29 * Software Foundation.
32 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
33 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
34 * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
35 * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
36 * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
37 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
38 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
39 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
40 * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
41 * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
42 * POSSIBILITY OF SUCH DAMAGES.
47 #include <contrib/dev/acpica/include/acpi.h>
48 #include <contrib/dev/acpica/include/accommon.h>
49 #include <contrib/dev/acpica/include/acinterp.h>
50 #include <contrib/dev/acpica/include/amlcode.h>
51 #include <contrib/dev/acpica/include/acnamesp.h>
54 #define _COMPONENT ACPI_EXECUTER
55 ACPI_MODULE_NAME ("exprep")
57 /* Local prototypes */
60 AcpiExDecodeFieldAccess (
61 ACPI_OPERAND_OBJECT *ObjDesc,
63 UINT32 *ReturnByteAlignment);
66 #ifdef ACPI_UNDER_DEVELOPMENT
69 AcpiExGenerateAccess (
70 UINT32 FieldBitOffset,
71 UINT32 FieldBitLength,
74 /*******************************************************************************
76 * FUNCTION: AcpiExGenerateAccess
78 * PARAMETERS: FieldBitOffset - Start of field within parent region/buffer
79 * FieldBitLength - Length of field in bits
80 * RegionLength - Length of parent in bytes
82 * RETURN: Field granularity (8, 16, 32 or 64) and
83 * ByteAlignment (1, 2, 3, or 4)
85 * DESCRIPTION: Generate an optimal access width for fields defined with the
88 * NOTE: Need to have the RegionLength in order to check for boundary
89 * conditions (end-of-region). However, the RegionLength is a deferred
90 * operation. Therefore, to complete this implementation, the generation
91 * of this access width must be deferred until the region length has
94 ******************************************************************************/
97 AcpiExGenerateAccess (
98 UINT32 FieldBitOffset,
99 UINT32 FieldBitLength,
102 UINT32 FieldByteLength;
103 UINT32 FieldByteOffset;
104 UINT32 FieldByteEndOffset;
105 UINT32 AccessByteWidth;
106 UINT32 FieldStartOffset;
107 UINT32 FieldEndOffset;
108 UINT32 MinimumAccessWidth = 0xFFFFFFFF;
109 UINT32 MinimumAccesses = 0xFFFFFFFF;
113 ACPI_FUNCTION_TRACE (ExGenerateAccess);
116 /* Round Field start offset and length to "minimal" byte boundaries */
118 FieldByteOffset = ACPI_DIV_8 (ACPI_ROUND_DOWN (FieldBitOffset, 8));
119 FieldByteEndOffset = ACPI_DIV_8 (ACPI_ROUND_UP (FieldBitLength +
121 FieldByteLength = FieldByteEndOffset - FieldByteOffset;
123 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
124 "Bit length %u, Bit offset %u\n",
125 FieldBitLength, FieldBitOffset));
127 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
128 "Byte Length %u, Byte Offset %u, End Offset %u\n",
129 FieldByteLength, FieldByteOffset, FieldByteEndOffset));
132 * Iterative search for the maximum access width that is both aligned
133 * and does not go beyond the end of the region
135 * Start at ByteAcc and work upwards to QwordAcc max. (1,2,4,8 bytes)
137 for (AccessByteWidth = 1; AccessByteWidth <= 8; AccessByteWidth <<= 1)
140 * 1) Round end offset up to next access boundary and make sure that
141 * this does not go beyond the end of the parent region.
142 * 2) When the Access width is greater than the FieldByteLength, we
143 * are done. (This does not optimize for the perfectly aligned
146 if (ACPI_ROUND_UP (FieldByteEndOffset, AccessByteWidth) <= RegionLength)
149 ACPI_ROUND_DOWN (FieldByteOffset, AccessByteWidth) /
153 ACPI_ROUND_UP ((FieldByteLength + FieldByteOffset),
154 AccessByteWidth) / AccessByteWidth;
156 Accesses = FieldEndOffset - FieldStartOffset;
158 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
159 "AccessWidth %u end is within region\n", AccessByteWidth));
161 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
162 "Field Start %u, Field End %u -- requires %u accesses\n",
163 FieldStartOffset, FieldEndOffset, Accesses));
165 /* Single access is optimal */
169 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
170 "Entire field can be accessed with one operation of size %u\n",
172 return_VALUE (AccessByteWidth);
176 * Fits in the region, but requires more than one read/write.
177 * try the next wider access on next iteration
179 if (Accesses < MinimumAccesses)
181 MinimumAccesses = Accesses;
182 MinimumAccessWidth = AccessByteWidth;
187 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
188 "AccessWidth %u end is NOT within region\n", AccessByteWidth));
189 if (AccessByteWidth == 1)
191 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
192 "Field goes beyond end-of-region!\n"));
194 /* Field does not fit in the region at all */
200 * This width goes beyond the end-of-region, back off to
203 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
204 "Backing off to previous optimal access width of %u\n",
205 MinimumAccessWidth));
206 return_VALUE (MinimumAccessWidth);
211 * Could not read/write field with one operation,
212 * just use max access width
214 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
215 "Cannot access field in one operation, using width 8\n"));
218 #endif /* ACPI_UNDER_DEVELOPMENT */
221 /*******************************************************************************
223 * FUNCTION: AcpiExDecodeFieldAccess
225 * PARAMETERS: ObjDesc - Field object
226 * FieldFlags - Encoded fieldflags (contains access bits)
227 * ReturnByteAlignment - Where the byte alignment is returned
229 * RETURN: Field granularity (8, 16, 32 or 64) and
230 * ByteAlignment (1, 2, 3, or 4)
232 * DESCRIPTION: Decode the AccessType bits of a field definition.
234 ******************************************************************************/
237 AcpiExDecodeFieldAccess (
238 ACPI_OPERAND_OBJECT *ObjDesc,
240 UINT32 *ReturnByteAlignment)
243 UINT32 ByteAlignment;
247 ACPI_FUNCTION_TRACE (ExDecodeFieldAccess);
250 Access = (FieldFlags & AML_FIELD_ACCESS_TYPE_MASK);
254 case AML_FIELD_ACCESS_ANY:
256 #ifdef ACPI_UNDER_DEVELOPMENT
258 AcpiExGenerateAccess (ObjDesc->CommonField.StartFieldBitOffset,
259 ObjDesc->CommonField.BitLength,
260 0xFFFFFFFF /* Temp until we pass RegionLength as parameter */);
261 BitLength = ByteAlignment * 8;
268 case AML_FIELD_ACCESS_BYTE:
269 case AML_FIELD_ACCESS_BUFFER: /* ACPI 2.0 (SMBus Buffer) */
274 case AML_FIELD_ACCESS_WORD:
279 case AML_FIELD_ACCESS_DWORD:
284 case AML_FIELD_ACCESS_QWORD: /* ACPI 2.0 */
290 /* Invalid field access type */
292 ACPI_ERROR ((AE_INFO,
293 "Unknown field access type 0x%X",
298 if (ObjDesc->Common.Type == ACPI_TYPE_BUFFER_FIELD)
301 * BufferField access can be on any byte boundary, so the
302 * ByteAlignment is always 1 byte -- regardless of any ByteAlignment
303 * implied by the field access type.
308 *ReturnByteAlignment = ByteAlignment;
309 return_UINT32 (BitLength);
313 /*******************************************************************************
315 * FUNCTION: AcpiExPrepCommonFieldObject
317 * PARAMETERS: ObjDesc - The field object
318 * FieldFlags - Access, LockRule, and UpdateRule.
319 * The format of a FieldFlag is described
320 * in the ACPI specification
321 * FieldAttribute - Special attributes (not used)
322 * FieldBitPosition - Field start position
323 * FieldBitLength - Field length in number of bits
327 * DESCRIPTION: Initialize the areas of the field object that are common
328 * to the various types of fields. Note: This is very "sensitive"
329 * code because we are solving the general case for field
332 ******************************************************************************/
335 AcpiExPrepCommonFieldObject (
336 ACPI_OPERAND_OBJECT *ObjDesc,
338 UINT8 FieldAttribute,
339 UINT32 FieldBitPosition,
340 UINT32 FieldBitLength)
342 UINT32 AccessBitWidth;
343 UINT32 ByteAlignment;
344 UINT32 NearestByteAddress;
347 ACPI_FUNCTION_TRACE (ExPrepCommonFieldObject);
351 * Note: the structure being initialized is the
352 * ACPI_COMMON_FIELD_INFO; No structure fields outside of the common
353 * area are initialized by this procedure.
355 ObjDesc->CommonField.FieldFlags = FieldFlags;
356 ObjDesc->CommonField.Attribute = FieldAttribute;
357 ObjDesc->CommonField.BitLength = FieldBitLength;
360 * Decode the access type so we can compute offsets. The access type gives
361 * two pieces of information - the width of each field access and the
362 * necessary ByteAlignment (address granularity) of the access.
364 * For AnyAcc, the AccessBitWidth is the largest width that is both
365 * necessary and possible in an attempt to access the whole field in one
366 * I/O operation. However, for AnyAcc, the ByteAlignment is always one
369 * For all Buffer Fields, the ByteAlignment is always one byte.
371 * For all other access types (Byte, Word, Dword, Qword), the Bitwidth is
372 * the same (equivalent) as the ByteAlignment.
374 AccessBitWidth = AcpiExDecodeFieldAccess (ObjDesc, FieldFlags,
378 return_ACPI_STATUS (AE_AML_OPERAND_VALUE);
381 /* Setup width (access granularity) fields (values are: 1, 2, 4, 8) */
383 ObjDesc->CommonField.AccessByteWidth = (UINT8)
384 ACPI_DIV_8 (AccessBitWidth);
387 * BaseByteOffset is the address of the start of the field within the
388 * region. It is the byte address of the first *datum* (field-width data
389 * unit) of the field. (i.e., the first datum that contains at least the
390 * first *bit* of the field.)
392 * Note: ByteAlignment is always either equal to the AccessBitWidth or 8
393 * (Byte access), and it defines the addressing granularity of the parent
397 ACPI_ROUND_BITS_DOWN_TO_BYTES (FieldBitPosition);
398 ObjDesc->CommonField.BaseByteOffset = (UINT32)
399 ACPI_ROUND_DOWN (NearestByteAddress, ByteAlignment);
402 * StartFieldBitOffset is the offset of the first bit of the field within
405 ObjDesc->CommonField.StartFieldBitOffset = (UINT8)
406 (FieldBitPosition - ACPI_MUL_8 (ObjDesc->CommonField.BaseByteOffset));
408 return_ACPI_STATUS (AE_OK);
412 /*******************************************************************************
414 * FUNCTION: AcpiExPrepFieldValue
416 * PARAMETERS: Info - Contains all field creation info
420 * DESCRIPTION: Construct an ACPI_OPERAND_OBJECT of type DefField and
421 * connect it to the parent Node.
423 ******************************************************************************/
426 AcpiExPrepFieldValue (
427 ACPI_CREATE_FIELD_INFO *Info)
429 ACPI_OPERAND_OBJECT *ObjDesc;
430 ACPI_OPERAND_OBJECT *SecondDesc = NULL;
432 UINT32 AccessByteWidth;
436 ACPI_FUNCTION_TRACE (ExPrepFieldValue);
439 /* Parameter validation */
441 if (Info->FieldType != ACPI_TYPE_LOCAL_INDEX_FIELD)
443 if (!Info->RegionNode)
445 ACPI_ERROR ((AE_INFO, "Null RegionNode"));
446 return_ACPI_STATUS (AE_AML_NO_OPERAND);
449 Type = AcpiNsGetType (Info->RegionNode);
450 if (Type != ACPI_TYPE_REGION)
452 ACPI_ERROR ((AE_INFO, "Needed Region, found type 0x%X (%s)",
453 Type, AcpiUtGetTypeName (Type)));
455 return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
459 /* Allocate a new field object */
461 ObjDesc = AcpiUtCreateInternalObject (Info->FieldType);
464 return_ACPI_STATUS (AE_NO_MEMORY);
467 /* Initialize areas of the object that are common to all fields */
469 ObjDesc->CommonField.Node = Info->FieldNode;
470 Status = AcpiExPrepCommonFieldObject (ObjDesc,
471 Info->FieldFlags, Info->Attribute,
472 Info->FieldBitPosition, Info->FieldBitLength);
473 if (ACPI_FAILURE (Status))
475 AcpiUtDeleteObjectDesc (ObjDesc);
476 return_ACPI_STATUS (Status);
479 /* Initialize areas of the object that are specific to the field type */
481 switch (Info->FieldType)
483 case ACPI_TYPE_LOCAL_REGION_FIELD:
485 ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode);
487 /* Allow full data read from EC address space */
489 if ((ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) &&
490 (ObjDesc->CommonField.BitLength > 8))
492 AccessByteWidth = ACPI_ROUND_BITS_UP_TO_BYTES (
493 ObjDesc->CommonField.BitLength);
495 /* Maximum byte width supported is 255 */
497 if (AccessByteWidth < 256)
499 ObjDesc->CommonField.AccessByteWidth = (UINT8) AccessByteWidth;
503 /* An additional reference for the container */
505 AcpiUtAddReference (ObjDesc->Field.RegionObj);
507 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
508 "RegionField: BitOff %X, Off %X, Gran %X, Region %p\n",
509 ObjDesc->Field.StartFieldBitOffset, ObjDesc->Field.BaseByteOffset,
510 ObjDesc->Field.AccessByteWidth, ObjDesc->Field.RegionObj));
514 case ACPI_TYPE_LOCAL_BANK_FIELD:
516 ObjDesc->BankField.Value = Info->BankValue;
517 ObjDesc->BankField.RegionObj =
518 AcpiNsGetAttachedObject (Info->RegionNode);
519 ObjDesc->BankField.BankObj =
520 AcpiNsGetAttachedObject (Info->RegisterNode);
522 /* An additional reference for the attached objects */
524 AcpiUtAddReference (ObjDesc->BankField.RegionObj);
525 AcpiUtAddReference (ObjDesc->BankField.BankObj);
527 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
528 "Bank Field: BitOff %X, Off %X, Gran %X, Region %p, BankReg %p\n",
529 ObjDesc->BankField.StartFieldBitOffset,
530 ObjDesc->BankField.BaseByteOffset,
531 ObjDesc->Field.AccessByteWidth,
532 ObjDesc->BankField.RegionObj,
533 ObjDesc->BankField.BankObj));
536 * Remember location in AML stream of the field unit
537 * opcode and operands -- since the BankValue
538 * operands must be evaluated.
540 SecondDesc = ObjDesc->Common.NextObject;
541 SecondDesc->Extra.AmlStart = ACPI_CAST_PTR (ACPI_PARSE_OBJECT,
542 Info->DataRegisterNode)->Named.Data;
543 SecondDesc->Extra.AmlLength = ACPI_CAST_PTR (ACPI_PARSE_OBJECT,
544 Info->DataRegisterNode)->Named.Length;
549 case ACPI_TYPE_LOCAL_INDEX_FIELD:
551 /* Get the Index and Data registers */
553 ObjDesc->IndexField.IndexObj =
554 AcpiNsGetAttachedObject (Info->RegisterNode);
555 ObjDesc->IndexField.DataObj =
556 AcpiNsGetAttachedObject (Info->DataRegisterNode);
558 if (!ObjDesc->IndexField.DataObj || !ObjDesc->IndexField.IndexObj)
560 ACPI_ERROR ((AE_INFO, "Null Index Object during field prep"));
561 AcpiUtDeleteObjectDesc (ObjDesc);
562 return_ACPI_STATUS (AE_AML_INTERNAL);
565 /* An additional reference for the attached objects */
567 AcpiUtAddReference (ObjDesc->IndexField.DataObj);
568 AcpiUtAddReference (ObjDesc->IndexField.IndexObj);
571 * April 2006: Changed to match MS behavior
573 * The value written to the Index register is the byte offset of the
574 * target field in units of the granularity of the IndexField
576 * Previously, the value was calculated as an index in terms of the
577 * width of the Data register, as below:
579 * ObjDesc->IndexField.Value = (UINT32)
580 * (Info->FieldBitPosition / ACPI_MUL_8 (
581 * ObjDesc->Field.AccessByteWidth));
583 * February 2006: Tried value as a byte offset:
584 * ObjDesc->IndexField.Value = (UINT32)
585 * ACPI_DIV_8 (Info->FieldBitPosition);
587 ObjDesc->IndexField.Value = (UINT32) ACPI_ROUND_DOWN (
588 ACPI_DIV_8 (Info->FieldBitPosition),
589 ObjDesc->IndexField.AccessByteWidth);
591 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD,
592 "IndexField: BitOff %X, Off %X, Value %X, Gran %X, Index %p, Data %p\n",
593 ObjDesc->IndexField.StartFieldBitOffset,
594 ObjDesc->IndexField.BaseByteOffset,
595 ObjDesc->IndexField.Value,
596 ObjDesc->Field.AccessByteWidth,
597 ObjDesc->IndexField.IndexObj,
598 ObjDesc->IndexField.DataObj));
602 /* No other types should get here */
607 * Store the constructed descriptor (ObjDesc) into the parent Node,
608 * preserving the current type of that NamedObj.
610 Status = AcpiNsAttachObject (Info->FieldNode, ObjDesc,
611 AcpiNsGetType (Info->FieldNode));
613 ACPI_DEBUG_PRINT ((ACPI_DB_BFIELD, "Set NamedObj %p [%4.4s], ObjDesc %p\n",
614 Info->FieldNode, AcpiUtGetNodeName (Info->FieldNode), ObjDesc));
616 /* Remove local reference to the object */
618 AcpiUtRemoveReference (ObjDesc);
619 return_ACPI_STATUS (Status);