2 * Copyright (c) 2003-2007 Nate Lawson
3 * Copyright (c) 2000 Michael Smith
4 * Copyright (c) 2000 BSDi
7 * Redistribution and use in source and binary forms, with or without
8 * modification, are permitted provided that the following conditions
10 * 1. Redistributions of source code must retain the above copyright
11 * notice, this list of conditions and the following disclaimer.
12 * 2. Redistributions in binary form must reproduce the above copyright
13 * notice, this list of conditions and the following disclaimer in the
14 * documentation and/or other materials provided with the distribution.
16 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
17 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
18 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
19 * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
20 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
21 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
22 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
23 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
24 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
25 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
29 #include <sys/cdefs.h>
30 __FBSDID("$FreeBSD$");
33 #include <sys/param.h>
34 #include <sys/kernel.h>
37 #include <sys/malloc.h>
38 #include <sys/module.h>
41 #include <machine/bus.h>
42 #include <machine/resource.h>
45 #include <contrib/dev/acpica/include/acpi.h>
46 #include <contrib/dev/acpica/include/accommon.h>
48 #include <dev/acpica/acpivar.h>
50 /* Hooks for the ACPI CA debugging infrastructure */
51 #define _COMPONENT ACPI_EC
52 ACPI_MODULE_NAME("EC")
58 typedef UINT8 EC_COMMAND;
60 #define EC_COMMAND_UNKNOWN ((EC_COMMAND) 0x00)
61 #define EC_COMMAND_READ ((EC_COMMAND) 0x80)
62 #define EC_COMMAND_WRITE ((EC_COMMAND) 0x81)
63 #define EC_COMMAND_BURST_ENABLE ((EC_COMMAND) 0x82)
64 #define EC_COMMAND_BURST_DISABLE ((EC_COMMAND) 0x83)
65 #define EC_COMMAND_QUERY ((EC_COMMAND) 0x84)
70 * The encoding of the EC status register is illustrated below.
71 * Note that a set bit (1) indicates the property is TRUE
72 * (e.g. if bit 0 is set then the output buffer is full).
77 * | | | | | | | +- Output Buffer Full?
78 * | | | | | | +--- Input Buffer Full?
79 * | | | | | +----- <reserved>
80 * | | | | +------- Data Register is Command Byte?
81 * | | | +--------- Burst Mode Enabled?
82 * | | +----------- SCI Event?
83 * | +------------- SMI Event?
84 * +--------------- <reserved>
87 typedef UINT8 EC_STATUS;
89 #define EC_FLAG_OUTPUT_BUFFER ((EC_STATUS) 0x01)
90 #define EC_FLAG_INPUT_BUFFER ((EC_STATUS) 0x02)
91 #define EC_FLAG_DATA_IS_CMD ((EC_STATUS) 0x08)
92 #define EC_FLAG_BURST_MODE ((EC_STATUS) 0x10)
98 typedef UINT8 EC_EVENT;
100 #define EC_EVENT_UNKNOWN ((EC_EVENT) 0x00)
101 #define EC_EVENT_OUTPUT_BUFFER_FULL ((EC_EVENT) 0x01)
102 #define EC_EVENT_INPUT_BUFFER_EMPTY ((EC_EVENT) 0x02)
103 #define EC_EVENT_SCI ((EC_EVENT) 0x20)
104 #define EC_EVENT_SMI ((EC_EVENT) 0x40)
106 /* Data byte returned after burst enable indicating it was successful. */
107 #define EC_BURST_ACK 0x90
110 * Register access primitives
112 #define EC_GET_DATA(sc) \
113 bus_space_read_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0)
115 #define EC_SET_DATA(sc, v) \
116 bus_space_write_1((sc)->ec_data_tag, (sc)->ec_data_handle, 0, (v))
118 #define EC_GET_CSR(sc) \
119 bus_space_read_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0)
121 #define EC_SET_CSR(sc, v) \
122 bus_space_write_1((sc)->ec_csr_tag, (sc)->ec_csr_handle, 0, (v))
124 /* Additional params to pass from the probe routine */
125 struct acpi_ec_params {
128 ACPI_HANDLE gpe_handle;
135 struct acpi_ec_softc {
137 ACPI_HANDLE ec_handle;
139 ACPI_HANDLE ec_gpehandle;
143 struct resource *ec_data_res;
144 bus_space_tag_t ec_data_tag;
145 bus_space_handle_t ec_data_handle;
148 struct resource *ec_csr_res;
149 bus_space_tag_t ec_csr_tag;
150 bus_space_handle_t ec_csr_handle;
156 volatile u_int ec_gencount;
162 * I couldn't find it in the spec but other implementations also use a
163 * value of 1 ms for the time to acquire global lock.
165 #define EC_LOCK_TIMEOUT 1000
167 /* Default delay in microseconds between each run of the status polling loop. */
168 #define EC_POLL_DELAY 50
170 /* Total time in ms spent waiting for a response from EC. */
171 #define EC_TIMEOUT 750
173 #define EVENT_READY(event, status) \
174 (((event) == EC_EVENT_OUTPUT_BUFFER_FULL && \
175 ((status) & EC_FLAG_OUTPUT_BUFFER) != 0) || \
176 ((event) == EC_EVENT_INPUT_BUFFER_EMPTY && \
177 ((status) & EC_FLAG_INPUT_BUFFER) == 0))
179 ACPI_SERIAL_DECL(ec, "ACPI embedded controller");
181 SYSCTL_DECL(_debug_acpi);
182 SYSCTL_NODE(_debug_acpi, OID_AUTO, ec, CTLFLAG_RD, NULL, "EC debugging");
184 static int ec_burst_mode;
185 TUNABLE_INT("debug.acpi.ec.burst", &ec_burst_mode);
186 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, burst, CTLFLAG_RW, &ec_burst_mode, 0,
187 "Enable use of burst mode (faster for nearly all systems)");
188 static int ec_polled_mode;
189 TUNABLE_INT("debug.acpi.ec.polled", &ec_polled_mode);
190 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, polled, CTLFLAG_RW, &ec_polled_mode, 0,
191 "Force use of polled mode (only if interrupt mode doesn't work)");
192 static int ec_timeout = EC_TIMEOUT;
193 TUNABLE_INT("debug.acpi.ec.timeout", &ec_timeout);
194 SYSCTL_INT(_debug_acpi_ec, OID_AUTO, timeout, CTLFLAG_RW, &ec_timeout,
195 EC_TIMEOUT, "Total time spent waiting for a response (poll+sleep)");
198 EcLock(struct acpi_ec_softc *sc)
202 /* If _GLK is non-zero, acquire the global lock. */
205 status = AcpiAcquireGlobalLock(EC_LOCK_TIMEOUT, &sc->ec_glkhandle);
206 if (ACPI_FAILURE(status))
209 ACPI_SERIAL_BEGIN(ec);
214 EcUnlock(struct acpi_ec_softc *sc)
218 AcpiReleaseGlobalLock(sc->ec_glkhandle);
221 static UINT32 EcGpeHandler(ACPI_HANDLE, UINT32, void *);
222 static ACPI_STATUS EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function,
223 void *Context, void **return_Context);
224 static ACPI_STATUS EcSpaceHandler(UINT32 Function,
225 ACPI_PHYSICAL_ADDRESS Address,
226 UINT32 Width, UINT64 *Value,
227 void *Context, void *RegionContext);
228 static ACPI_STATUS EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event,
230 static ACPI_STATUS EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd);
231 static ACPI_STATUS EcRead(struct acpi_ec_softc *sc, UINT8 Address,
233 static ACPI_STATUS EcWrite(struct acpi_ec_softc *sc, UINT8 Address,
235 static int acpi_ec_probe(device_t dev);
236 static int acpi_ec_attach(device_t dev);
237 static int acpi_ec_suspend(device_t dev);
238 static int acpi_ec_resume(device_t dev);
239 static int acpi_ec_shutdown(device_t dev);
240 static int acpi_ec_read_method(device_t dev, u_int addr,
241 UINT64 *val, int width);
242 static int acpi_ec_write_method(device_t dev, u_int addr,
243 UINT64 val, int width);
245 static device_method_t acpi_ec_methods[] = {
246 /* Device interface */
247 DEVMETHOD(device_probe, acpi_ec_probe),
248 DEVMETHOD(device_attach, acpi_ec_attach),
249 DEVMETHOD(device_suspend, acpi_ec_suspend),
250 DEVMETHOD(device_resume, acpi_ec_resume),
251 DEVMETHOD(device_shutdown, acpi_ec_shutdown),
253 /* Embedded controller interface */
254 DEVMETHOD(acpi_ec_read, acpi_ec_read_method),
255 DEVMETHOD(acpi_ec_write, acpi_ec_write_method),
260 static driver_t acpi_ec_driver = {
263 sizeof(struct acpi_ec_softc),
266 static devclass_t acpi_ec_devclass;
267 DRIVER_MODULE(acpi_ec, acpi, acpi_ec_driver, acpi_ec_devclass, 0, 0);
268 MODULE_DEPEND(acpi_ec, acpi, 1, 1, 1);
271 * Look for an ECDT and if we find one, set up default GPE and
272 * space handlers to catch attempts to access EC space before
273 * we have a real driver instance in place.
275 * TODO: Some old Gateway laptops need us to fake up an ECDT or
276 * otherwise attach early so that _REG methods can run.
279 acpi_ec_ecdt_probe(device_t parent)
281 ACPI_TABLE_ECDT *ecdt;
285 struct acpi_ec_params *params;
287 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
289 /* Find and validate the ECDT. */
290 status = AcpiGetTable(ACPI_SIG_ECDT, 1, (ACPI_TABLE_HEADER **)&ecdt);
291 if (ACPI_FAILURE(status) ||
292 ecdt->Control.BitWidth != 8 ||
293 ecdt->Data.BitWidth != 8) {
297 /* Create the child device with the given unit number. */
298 child = BUS_ADD_CHILD(parent, 0, "acpi_ec", ecdt->Uid);
300 printf("%s: can't add child\n", __func__);
304 /* Find and save the ACPI handle for this device. */
305 status = AcpiGetHandle(NULL, ecdt->Id, &h);
306 if (ACPI_FAILURE(status)) {
307 device_delete_child(parent, child);
308 printf("%s: can't get handle\n", __func__);
311 acpi_set_handle(child, h);
313 /* Set the data and CSR register addresses. */
314 bus_set_resource(child, SYS_RES_IOPORT, 0, ecdt->Data.Address,
316 bus_set_resource(child, SYS_RES_IOPORT, 1, ecdt->Control.Address,
320 * Store values for the probe/attach routines to use. Store the
321 * ECDT GPE bit and set the global lock flag according to _GLK.
322 * Note that it is not perfectly correct to be evaluating a method
323 * before initializing devices, but in practice this function
324 * should be safe to call at this point.
326 params = malloc(sizeof(struct acpi_ec_params), M_TEMP, M_WAITOK | M_ZERO);
327 params->gpe_handle = NULL;
328 params->gpe_bit = ecdt->Gpe;
329 params->uid = ecdt->Uid;
330 acpi_GetInteger(h, "_GLK", ¶ms->glk);
331 acpi_set_private(child, params);
333 /* Finish the attach process. */
334 if (device_probe_and_attach(child) != 0)
335 device_delete_child(parent, child);
339 acpi_ec_probe(device_t dev)
349 struct acpi_ec_params *params;
350 static char *ec_ids[] = { "PNP0C09", NULL };
352 /* Check that this is a device and that EC is not disabled. */
353 if (acpi_get_type(dev) != ACPI_TYPE_DEVICE || acpi_disabled("ec"))
357 * If probed via ECDT, set description and continue. Otherwise,
358 * we can access the namespace and make sure this is not a
364 buf.Length = ACPI_ALLOCATE_BUFFER;
365 params = acpi_get_private(dev);
366 if (params != NULL) {
369 } else if (ACPI_ID_PROBE(device_get_parent(dev), dev, ec_ids)) {
370 params = malloc(sizeof(struct acpi_ec_params), M_TEMP,
372 h = acpi_get_handle(dev);
375 * Read the unit ID to check for duplicate attach and the
376 * global lock value to see if we should acquire it when
379 status = acpi_GetInteger(h, "_UID", ¶ms->uid);
380 if (ACPI_FAILURE(status))
382 status = acpi_GetInteger(h, "_GLK", ¶ms->glk);
383 if (ACPI_FAILURE(status))
387 * Evaluate the _GPE method to find the GPE bit used by the EC to
388 * signal status (SCI). If it's a package, it contains a reference
389 * and GPE bit, similar to _PRW.
391 status = AcpiEvaluateObject(h, "_GPE", NULL, &buf);
392 if (ACPI_FAILURE(status)) {
393 device_printf(dev, "can't evaluate _GPE - %s\n",
394 AcpiFormatException(status));
397 obj = (ACPI_OBJECT *)buf.Pointer;
402 case ACPI_TYPE_INTEGER:
403 params->gpe_handle = NULL;
404 params->gpe_bit = obj->Integer.Value;
406 case ACPI_TYPE_PACKAGE:
407 if (!ACPI_PKG_VALID(obj, 2))
410 acpi_GetReference(NULL, &obj->Package.Elements[0]);
411 if (params->gpe_handle == NULL ||
412 acpi_PkgInt32(obj, 1, ¶ms->gpe_bit) != 0)
416 device_printf(dev, "_GPE has invalid type %d\n", obj->Type);
420 /* Store the values we got from the namespace for attach. */
421 acpi_set_private(dev, params);
424 * Check for a duplicate probe. This can happen when a probe
425 * via ECDT succeeded already. If this is a duplicate, disable
428 peer = devclass_get_device(acpi_ec_devclass, params->uid);
429 if (peer == NULL || !device_is_alive(peer))
437 snprintf(desc, sizeof(desc), "Embedded Controller: GPE %#x%s%s",
438 params->gpe_bit, (params->glk) ? ", GLK" : "",
439 ecdt ? ", ECDT" : "");
440 device_set_desc_copy(dev, desc);
443 if (ret > 0 && params)
444 free(params, M_TEMP);
446 AcpiOsFree(buf.Pointer);
451 acpi_ec_attach(device_t dev)
453 struct acpi_ec_softc *sc;
454 struct acpi_ec_params *params;
457 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
459 /* Fetch/initialize softc (assumes softc is pre-zeroed). */
460 sc = device_get_softc(dev);
461 params = acpi_get_private(dev);
463 sc->ec_handle = acpi_get_handle(dev);
465 /* Retrieve previously probed values via device ivars. */
466 sc->ec_glk = params->glk;
467 sc->ec_gpebit = params->gpe_bit;
468 sc->ec_gpehandle = params->gpe_handle;
469 sc->ec_uid = params->uid;
470 sc->ec_suspending = FALSE;
471 acpi_set_private(dev, NULL);
472 free(params, M_TEMP);
474 /* Attach bus resources for data and command/status ports. */
476 sc->ec_data_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
477 &sc->ec_data_rid, RF_ACTIVE);
478 if (sc->ec_data_res == NULL) {
479 device_printf(dev, "can't allocate data port\n");
482 sc->ec_data_tag = rman_get_bustag(sc->ec_data_res);
483 sc->ec_data_handle = rman_get_bushandle(sc->ec_data_res);
486 sc->ec_csr_res = bus_alloc_resource_any(sc->ec_dev, SYS_RES_IOPORT,
487 &sc->ec_csr_rid, RF_ACTIVE);
488 if (sc->ec_csr_res == NULL) {
489 device_printf(dev, "can't allocate command/status port\n");
492 sc->ec_csr_tag = rman_get_bustag(sc->ec_csr_res);
493 sc->ec_csr_handle = rman_get_bushandle(sc->ec_csr_res);
496 * Install a handler for this EC's GPE bit. We want edge-triggered
499 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching GPE handler\n"));
500 Status = AcpiInstallGpeHandler(sc->ec_gpehandle, sc->ec_gpebit,
501 ACPI_GPE_EDGE_TRIGGERED, EcGpeHandler, sc);
502 if (ACPI_FAILURE(Status)) {
503 device_printf(dev, "can't install GPE handler for %s - %s\n",
504 acpi_name(sc->ec_handle), AcpiFormatException(Status));
509 * Install address space handler
511 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "attaching address space handler\n"));
512 Status = AcpiInstallAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
513 &EcSpaceHandler, &EcSpaceSetup, sc);
514 if (ACPI_FAILURE(Status)) {
515 device_printf(dev, "can't install address space handler for %s - %s\n",
516 acpi_name(sc->ec_handle), AcpiFormatException(Status));
520 /* Enable runtime GPEs for the handler. */
521 Status = AcpiEnableGpe(sc->ec_gpehandle, sc->ec_gpebit);
522 if (ACPI_FAILURE(Status)) {
523 device_printf(dev, "AcpiEnableGpe failed: %s\n",
524 AcpiFormatException(Status));
528 ACPI_DEBUG_PRINT((ACPI_DB_RESOURCES, "acpi_ec_attach complete\n"));
532 AcpiRemoveGpeHandler(sc->ec_gpehandle, sc->ec_gpebit, EcGpeHandler);
533 AcpiRemoveAddressSpaceHandler(sc->ec_handle, ACPI_ADR_SPACE_EC,
536 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_csr_rid,
539 bus_release_resource(sc->ec_dev, SYS_RES_IOPORT, sc->ec_data_rid,
545 acpi_ec_suspend(device_t dev)
547 struct acpi_ec_softc *sc;
549 sc = device_get_softc(dev);
550 sc->ec_suspending = TRUE;
555 acpi_ec_resume(device_t dev)
557 struct acpi_ec_softc *sc;
559 sc = device_get_softc(dev);
560 sc->ec_suspending = FALSE;
565 acpi_ec_shutdown(device_t dev)
567 struct acpi_ec_softc *sc;
569 /* Disable the GPE so we don't get EC events during shutdown. */
570 sc = device_get_softc(dev);
571 AcpiDisableGpe(sc->ec_gpehandle, sc->ec_gpebit);
575 /* Methods to allow other devices (e.g., smbat) to read/write EC space. */
577 acpi_ec_read_method(device_t dev, u_int addr, UINT64 *val, int width)
579 struct acpi_ec_softc *sc;
582 sc = device_get_softc(dev);
583 status = EcSpaceHandler(ACPI_READ, addr, width * 8, val, sc, NULL);
584 if (ACPI_FAILURE(status))
590 acpi_ec_write_method(device_t dev, u_int addr, UINT64 val, int width)
592 struct acpi_ec_softc *sc;
595 sc = device_get_softc(dev);
596 status = EcSpaceHandler(ACPI_WRITE, addr, width * 8, &val, sc, NULL);
597 if (ACPI_FAILURE(status))
603 EcCheckStatus(struct acpi_ec_softc *sc, const char *msg, EC_EVENT event)
608 status = AE_NO_HARDWARE_RESPONSE;
609 ec_status = EC_GET_CSR(sc);
610 if (sc->ec_burstactive && !(ec_status & EC_FLAG_BURST_MODE)) {
611 CTR1(KTR_ACPI, "ec burst disabled in waitevent (%s)", msg);
612 sc->ec_burstactive = FALSE;
614 if (EVENT_READY(event, ec_status)) {
615 CTR2(KTR_ACPI, "ec %s wait ready, status %#x", msg, ec_status);
622 EcGpeQueryHandler(void *Context)
624 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
627 int retry, sci_enqueued;
630 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
631 KASSERT(Context != NULL, ("EcGpeQueryHandler called with NULL"));
633 /* Serialize user access with EcSpaceHandler(). */
635 if (ACPI_FAILURE(Status)) {
636 device_printf(sc->ec_dev, "GpeQuery lock error: %s\n",
637 AcpiFormatException(Status));
642 * Send a query command to the EC to find out which _Qxx call it
643 * wants to make. This command clears the SCI bit and also the
644 * interrupt source since we are edge-triggered. To prevent the GPE
645 * that may arise from running the query from causing another query
646 * to be queued, we clear the pending flag only after running it.
648 sci_enqueued = sc->ec_sci_pend;
649 for (retry = 0; retry < 2; retry++) {
650 Status = EcCommand(sc, EC_COMMAND_QUERY);
651 if (ACPI_SUCCESS(Status))
653 if (EcCheckStatus(sc, "retr_check",
654 EC_EVENT_INPUT_BUFFER_EMPTY) == AE_OK)
659 sc->ec_sci_pend = FALSE;
660 if (ACPI_FAILURE(Status)) {
662 device_printf(sc->ec_dev, "GPE query failed: %s\n",
663 AcpiFormatException(Status));
666 Data = EC_GET_DATA(sc);
669 * We have to unlock before running the _Qxx method below since that
670 * method may attempt to read/write from EC address space, causing
671 * recursive acquisition of the lock.
675 /* Ignore the value for "no outstanding event". (13.3.5) */
676 CTR2(KTR_ACPI, "ec query ok,%s running _Q%02X", Data ? "" : " not", Data);
680 /* Evaluate _Qxx to respond to the controller. */
681 snprintf(qxx, sizeof(qxx), "_Q%02X", Data);
683 Status = AcpiEvaluateObject(sc->ec_handle, qxx, NULL, NULL);
684 if (ACPI_FAILURE(Status) && Status != AE_NOT_FOUND) {
685 device_printf(sc->ec_dev, "evaluation of query method %s failed: %s\n",
686 qxx, AcpiFormatException(Status));
689 /* Reenable runtime GPE if its execution was deferred. */
691 Status = AcpiFinishGpe(sc->ec_gpehandle, sc->ec_gpebit);
692 if (ACPI_FAILURE(Status))
693 device_printf(sc->ec_dev, "reenabling runtime GPE failed: %s\n",
694 AcpiFormatException(Status));
699 * The GPE handler is called when IBE/OBF or SCI events occur. We are
700 * called from an unknown lock context.
703 EcGpeHandler(ACPI_HANDLE GpeDevice, UINT32 GpeNumber, void *Context)
705 struct acpi_ec_softc *sc = Context;
709 KASSERT(Context != NULL, ("EcGpeHandler called with NULL"));
710 CTR0(KTR_ACPI, "ec gpe handler start");
713 * Notify EcWaitEvent() that the status register is now fresh. If we
714 * didn't do this, it wouldn't be possible to distinguish an old IBE
715 * from a new one, for example when doing a write transaction (writing
716 * address and then data values.)
718 atomic_add_int(&sc->ec_gencount, 1);
722 * If the EC_SCI bit of the status register is set, queue a query handler.
723 * It will run the query and _Qxx method later, under the lock.
725 EcStatus = EC_GET_CSR(sc);
726 if ((EcStatus & EC_EVENT_SCI) && !sc->ec_sci_pend) {
727 CTR0(KTR_ACPI, "ec gpe queueing query handler");
728 Status = AcpiOsExecute(OSL_GPE_HANDLER, EcGpeQueryHandler, Context);
729 if (ACPI_SUCCESS(Status)) {
730 sc->ec_sci_pend = TRUE;
733 printf("EcGpeHandler: queuing GPE query handler failed\n");
735 return (ACPI_REENABLE_GPE);
739 EcSpaceSetup(ACPI_HANDLE Region, UINT32 Function, void *Context,
740 void **RegionContext)
743 ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
746 * If deactivating a region, always set the output to NULL. Otherwise,
747 * just pass the context through.
749 if (Function == ACPI_REGION_DEACTIVATE)
750 *RegionContext = NULL;
752 *RegionContext = Context;
754 return_ACPI_STATUS (AE_OK);
758 EcSpaceHandler(UINT32 Function, ACPI_PHYSICAL_ADDRESS Address, UINT32 Width,
759 UINT64 *Value, void *Context, void *RegionContext)
761 struct acpi_ec_softc *sc = (struct acpi_ec_softc *)Context;
762 ACPI_PHYSICAL_ADDRESS EcAddr;
766 ACPI_FUNCTION_TRACE_U32((char *)(uintptr_t)__func__, (UINT32)Address);
768 if (Function != ACPI_READ && Function != ACPI_WRITE)
769 return_ACPI_STATUS (AE_BAD_PARAMETER);
770 if (Width % 8 != 0 || Value == NULL || Context == NULL)
771 return_ACPI_STATUS (AE_BAD_PARAMETER);
772 if (Address + Width / 8 > 256)
773 return_ACPI_STATUS (AE_BAD_ADDRESS);
776 * If booting, check if we need to run the query handler. If so, we
777 * we call it directly here since our thread taskq is not active yet.
779 if (cold || rebooting || sc->ec_suspending) {
780 if ((EC_GET_CSR(sc) & EC_EVENT_SCI)) {
781 CTR0(KTR_ACPI, "ec running gpe handler directly");
782 EcGpeQueryHandler(sc);
786 /* Serialize with EcGpeQueryHandler() at transaction granularity. */
788 if (ACPI_FAILURE(Status))
789 return_ACPI_STATUS (Status);
791 /* If we can't start burst mode, continue anyway. */
792 Status = EcCommand(sc, EC_COMMAND_BURST_ENABLE);
793 if (ACPI_SUCCESS(Status)) {
794 if (EC_GET_DATA(sc) == EC_BURST_ACK) {
795 CTR0(KTR_ACPI, "ec burst enabled");
796 sc->ec_burstactive = TRUE;
800 /* Perform the transaction(s), based on Width. */
802 EcData = (UINT8 *)Value;
803 if (Function == ACPI_READ)
808 Status = EcRead(sc, EcAddr, EcData);
811 Status = EcWrite(sc, EcAddr, *EcData);
814 if (ACPI_FAILURE(Status))
818 } while (EcAddr < Address + Width / 8);
820 if (sc->ec_burstactive) {
821 sc->ec_burstactive = FALSE;
822 if (ACPI_SUCCESS(EcCommand(sc, EC_COMMAND_BURST_DISABLE)))
823 CTR0(KTR_ACPI, "ec disabled burst ok");
827 return_ACPI_STATUS (Status);
831 EcWaitEvent(struct acpi_ec_softc *sc, EC_EVENT Event, u_int gen_count)
833 static int no_intr = 0;
835 int count, i, need_poll, slp_ival;
837 ACPI_SERIAL_ASSERT(ec);
838 Status = AE_NO_HARDWARE_RESPONSE;
839 need_poll = cold || rebooting || ec_polled_mode || sc->ec_suspending;
841 /* Wait for event by polling or GPE (interrupt). */
843 count = (ec_timeout * 1000) / EC_POLL_DELAY;
847 for (i = 0; i < count; i++) {
848 Status = EcCheckStatus(sc, "poll", Event);
851 DELAY(EC_POLL_DELAY);
854 slp_ival = hz / 1000;
858 /* hz has less than 1 ms resolution so scale timeout. */
860 count = ec_timeout / (1000 / hz);
864 * Wait for the GPE to signal the status changed, checking the
865 * status register each time we get one. It's possible to get a
866 * GPE for an event we're not interested in here (i.e., SCI for
869 for (i = 0; i < count; i++) {
870 if (gen_count == sc->ec_gencount)
871 tsleep(sc, 0, "ecgpe", slp_ival);
873 * Record new generation count. It's possible the GPE was
874 * just to notify us that a query is needed and we need to
875 * wait for a second GPE to signal the completion of the
876 * event we are actually waiting for.
878 Status = EcCheckStatus(sc, "sleep", Event);
879 if (Status == AE_OK) {
880 if (gen_count == sc->ec_gencount)
886 gen_count = sc->ec_gencount;
890 * We finished waiting for the GPE and it never arrived. Try to
891 * read the register once and trust whatever value we got. This is
892 * the best we can do at this point.
895 Status = EcCheckStatus(sc, "sleep_end", Event);
897 if (!need_poll && no_intr > 10) {
898 device_printf(sc->ec_dev,
899 "not getting interrupts, switched to polled mode\n");
903 CTR0(KTR_ACPI, "error: ec wait timed out");
908 EcCommand(struct acpi_ec_softc *sc, EC_COMMAND cmd)
915 ACPI_SERIAL_ASSERT(ec);
917 /* Don't use burst mode if user disabled it. */
918 if (!ec_burst_mode && cmd == EC_COMMAND_BURST_ENABLE)
921 /* Decide what to wait for based on command type. */
923 case EC_COMMAND_READ:
924 case EC_COMMAND_WRITE:
925 case EC_COMMAND_BURST_DISABLE:
926 event = EC_EVENT_INPUT_BUFFER_EMPTY;
928 case EC_COMMAND_QUERY:
929 case EC_COMMAND_BURST_ENABLE:
930 event = EC_EVENT_OUTPUT_BUFFER_FULL;
933 device_printf(sc->ec_dev, "EcCommand: invalid command %#x\n", cmd);
934 return (AE_BAD_PARAMETER);
938 * Ensure empty input buffer before issuing command.
939 * Use generation count of zero to force a quick check.
941 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, 0);
942 if (ACPI_FAILURE(status))
945 /* Run the command and wait for the chosen event. */
946 CTR1(KTR_ACPI, "ec running command %#x", cmd);
947 gen_count = sc->ec_gencount;
949 status = EcWaitEvent(sc, event, gen_count);
950 if (ACPI_SUCCESS(status)) {
951 /* If we succeeded, burst flag should now be present. */
952 if (cmd == EC_COMMAND_BURST_ENABLE) {
953 ec_status = EC_GET_CSR(sc);
954 if ((ec_status & EC_FLAG_BURST_MODE) == 0)
958 device_printf(sc->ec_dev, "EcCommand: no response to %#x\n", cmd);
963 EcRead(struct acpi_ec_softc *sc, UINT8 Address, UINT8 *Data)
969 ACPI_SERIAL_ASSERT(ec);
970 CTR1(KTR_ACPI, "ec read from %#x", Address);
972 for (retry = 0; retry < 2; retry++) {
973 status = EcCommand(sc, EC_COMMAND_READ);
974 if (ACPI_FAILURE(status))
977 gen_count = sc->ec_gencount;
978 EC_SET_DATA(sc, Address);
979 status = EcWaitEvent(sc, EC_EVENT_OUTPUT_BUFFER_FULL, gen_count);
980 if (ACPI_FAILURE(status)) {
981 if (EcCheckStatus(sc, "retr_check",
982 EC_EVENT_INPUT_BUFFER_EMPTY) == AE_OK)
987 *Data = EC_GET_DATA(sc);
990 device_printf(sc->ec_dev, "EcRead: failed waiting to get data\n");
995 EcWrite(struct acpi_ec_softc *sc, UINT8 Address, UINT8 Data)
1000 ACPI_SERIAL_ASSERT(ec);
1001 CTR2(KTR_ACPI, "ec write to %#x, data %#x", Address, Data);
1003 status = EcCommand(sc, EC_COMMAND_WRITE);
1004 if (ACPI_FAILURE(status))
1007 gen_count = sc->ec_gencount;
1008 EC_SET_DATA(sc, Address);
1009 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1010 if (ACPI_FAILURE(status)) {
1011 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent address\n");
1015 gen_count = sc->ec_gencount;
1016 EC_SET_DATA(sc, Data);
1017 status = EcWaitEvent(sc, EC_EVENT_INPUT_BUFFER_EMPTY, gen_count);
1018 if (ACPI_FAILURE(status)) {
1019 device_printf(sc->ec_dev, "EcWrite: failed waiting for sent data\n");