src/arm64/marvell/armada-37xx.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0+ OR MIT)
   2 /*
   3  * Device Tree Include file for Marvell Armada 37xx family of SoCs.
   4  *
   5  * Copyright (C) 2016 Marvell
   6  *
   7  * Gregory CLEMENT <gregory.clement@free-electrons.com>
   8  *
   9  */
  10
  11 #include <dt-bindings/interrupt-controller/arm-gic.h>
  12
  13 / {
  14         model = "Marvell Armada 37xx SoC";
  15         compatible = "marvell,armada3700";
  16         interrupt-parent = <&gic>;
  17         #address-cells = <2>;
  18         #size-cells = <2>;
  19
  20         aliases {
  21                 serial0 = &uart0;
  22                 serial1 = &uart1;
  23         };
  24
  25         reserved-memory {
  26                 #address-cells = <2>;
  27                 #size-cells = <2>;
  28                 ranges;
  29
  30                 /*
  31                  * The PSCI firmware region depicted below is the default one
  32                  * and should be updated by the bootloader.
  33                  */
  34                 psci-area@4000000 {
  35                         reg = <0 0x4000000 0 0x200000>;
  36                         no-map;
  37                 };
  38         };
  39
  40         cpus {
  41                 #address-cells = <1>;
  42                 #size-cells = <0>;
  43                 cpu0: cpu@0 {
  44                         device_type = "cpu";
  45                         compatible = "arm,cortex-a53";
  46                         reg = <0>;
  47                         clocks = <&nb_periph_clk 16>;
  48                         enable-method = "psci";
  49                 };
  50         };
  51
  52         psci {
  53                 compatible = "arm,psci-0.2";
  54                 method = "smc";
  55         };
  56
  57         timer {
  58                 compatible = "arm,armv8-timer";
  59                 interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>,
  60                              <GIC_PPI 14 IRQ_TYPE_LEVEL_HIGH>,
  61                              <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>,
  62                              <GIC_PPI 10 IRQ_TYPE_LEVEL_HIGH>;
  63         };
  64
  65         pmu {
  66                 compatible = "arm,armv8-pmuv3";
  67                 interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
  68         };
  69
  70         soc {
  71                 compatible = "simple-bus";
  72                 #address-cells = <2>;
  73                 #size-cells = <2>;
  74                 ranges;
  75
  76                 internal-regs@d0000000 {
  77                         #address-cells = <1>;
  78                         #size-cells = <1>;
  79                         compatible = "simple-bus";
  80                         /* 32M internal register @ 0xd000_0000 */
  81                         ranges = <0x0 0x0 0xd0000000 0x2000000>;
  82
  83                         wdt: watchdog@8300 {
  84                                 compatible = "marvell,armada-3700-wdt";
  85                                 reg = <0x8300 0x40>;
  86                                 marvell,system-controller = <&cpu_misc>;
  87                                 clocks = <&xtalclk>;
  88                         };
  89
  90                         cpu_misc: system-controller@d000 {
  91                                 compatible = "marvell,armada-3700-cpu-misc",
  92                                              "syscon";
  93                                 reg = <0xd000 0x1000>;
  94                         };
  95
  96                         spi0: spi@10600 {
  97                                 compatible = "marvell,armada-3700-spi";
  98                                 #address-cells = <1>;
  99                                 #size-cells = <0>;
 100                                 reg = <0x10600 0xA00>;
 101                                 clocks = <&nb_periph_clk 7>;
 102                                 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>;
 103                                 num-cs = <4>;
 104                                 status = "disabled";
 105                         };
 106
 107                         i2c0: i2c@11000 {
 108                                 compatible = "marvell,armada-3700-i2c";
 109                                 reg = <0x11000 0x24>;
 110                                 #address-cells = <1>;
 111                                 #size-cells = <0>;
 112                                 clocks = <&nb_periph_clk 10>;
 113                                 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
 114                                 mrvl,i2c-fast-mode;
 115                                 status = "disabled";
 116                         };
 117
 118                         i2c1: i2c@11080 {
 119                                 compatible = "marvell,armada-3700-i2c";
 120                                 reg = <0x11080 0x24>;
 121                                 #address-cells = <1>;
 122                                 #size-cells = <0>;
 123                                 clocks = <&nb_periph_clk 9>;
 124                                 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
 125                                 mrvl,i2c-fast-mode;
 126                                 status = "disabled";
 127                         };
 128
 129                         avs: avs@11500 {
 130                                 compatible = "marvell,armada-3700-avs",
 131                                              "syscon";
 132                                 reg = <0x11500 0x40>;
 133                         };
 134
 135                         uart0: serial@12000 {
 136                                 compatible = "marvell,armada-3700-uart";
 137                                 reg = <0x12000 0x200>;
 138                                 clocks = <&xtalclk>;
 139                                 interrupts =
 140                                 <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
 141                                 <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>,
 142                                 <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
 143                                 interrupt-names = "uart-sum", "uart-tx", "uart-rx";
 144                                 status = "disabled";
 145                         };
 146
 147                         uart1: serial@12200 {
 148                                 compatible = "marvell,armada-3700-uart-ext";
 149                                 reg = <0x12200 0x30>;
 150                                 clocks = <&xtalclk>;
 151                                 interrupts =
 152                                 <GIC_SPI 30 IRQ_TYPE_EDGE_RISING>,
 153                                 <GIC_SPI 31 IRQ_TYPE_EDGE_RISING>;
 154                                 interrupt-names = "uart-tx", "uart-rx";
 155                                 status = "disabled";
 156                         };
 157
 158                         nb_periph_clk: nb-periph-clk@13000 {
 159                                 compatible = "marvell,armada-3700-periph-clock-nb";
 160                                 reg = <0x13000 0x100>;
 161                                 clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 162                                 <&tbg 3>, <&xtalclk>;
 163                                 #clock-cells = <1>;
 164                         };
 165
 166                         sb_periph_clk: sb-periph-clk@18000 {
 167                                 compatible = "marvell,armada-3700-periph-clock-sb";
 168                                 reg = <0x18000 0x100>;
 169                                 clocks = <&tbg 0>, <&tbg 1>, <&tbg 2>,
 170                                 <&tbg 3>, <&xtalclk>;
 171                                 #clock-cells = <1>;
 172                         };
 173
 174                         tbg: tbg@13200 {
 175                                 compatible = "marvell,armada-3700-tbg-clock";
 176                                 reg = <0x13200 0x100>;
 177                                 clocks = <&xtalclk>;
 178                                 #clock-cells = <1>;
 179                         };
 180
 181                         pinctrl_nb: pinctrl@13800 {
 182                                 compatible = "marvell,armada3710-nb-pinctrl",
 183                                              "syscon", "simple-mfd";
 184                                 reg = <0x13800 0x100>, <0x13C00 0x20>;
 185                                 /* MPP1[19:0] */
 186                                 gpionb: gpio {
 187                                         #gpio-cells = <2>;
 188                                         gpio-ranges = <&pinctrl_nb 0 0 36>;
 189                                         gpio-controller;
 190                                         interrupt-controller;
 191                                         #interrupt-cells = <2>;
 192                                         interrupts =
 193                                         <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
 194                                         <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
 195                                         <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
 196                                         <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
 197                                         <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
 198                                         <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
 199                                         <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
 200                                         <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
 201                                         <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>,
 202                                         <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
 203                                         <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>,
 204                                         <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>;
 205                                 };
 206
 207                                 xtalclk: xtal-clk {
 208                                         compatible = "marvell,armada-3700-xtal-clock";
 209                                         clock-output-names = "xtal";
 210                                         #clock-cells = <0>;
 211                                 };
 212
 213                                 spi_quad_pins: spi-quad-pins {
 214                                         groups = "spi_quad";
 215                                         function = "spi";
 216                                 };
 217
 218                                 spi_cs1_pins: spi-cs1-pins {
 219                                         groups = "spi_cs1";
 220                                         function = "spi";
 221                                 };
 222
 223                                 i2c1_pins: i2c1-pins {
 224                                         groups = "i2c1";
 225                                         function = "i2c";
 226                                 };
 227
 228                                 i2c2_pins: i2c2-pins {
 229                                         groups = "i2c2";
 230                                         function = "i2c";
 231                                 };
 232
 233                                 uart1_pins: uart1-pins {
 234                                         groups = "uart1";
 235                                         function = "uart";
 236                                 };
 237
 238                                 uart2_pins: uart2-pins {
 239                                         groups = "uart2";
 240                                         function = "uart";
 241                                 };
 242
 243                                 mmc_pins: mmc-pins {
 244                                         groups = "emmc_nb";
 245                                         function = "emmc";
 246                                 };
 247                         };
 248
 249                         nb_pm: syscon@14000 {
 250                                 compatible = "marvell,armada-3700-nb-pm",
 251                                              "syscon";
 252                                 reg = <0x14000 0x60>;
 253                         };
 254
 255                         comphy: phy@18300 {
 256                                 compatible = "marvell,comphy-a3700";
 257                                 reg = <0x18300 0x300>,
 258                                       <0x1F000 0x400>,
 259                                       <0x5C000 0x400>,
 260                                       <0xe0178 0x8>;
 261                                 reg-names = "comphy",
 262                                             "lane1_pcie_gbe",
 263                                             "lane0_usb3_gbe",
 264                                             "lane2_sata_usb3";
 265                                 #address-cells = <1>;
 266                                 #size-cells = <0>;
 267
 268                                 comphy0: phy@0 {
 269                                         reg = <0>;
 270                                         #phy-cells = <1>;
 271                                 };
 272
 273                                 comphy1: phy@1 {
 274                                         reg = <1>;
 275                                         #phy-cells = <1>;
 276                                 };
 277
 278                                 comphy2: phy@2 {
 279                                         reg = <2>;
 280                                         #phy-cells = <1>;
 281                                 };
 282                         };
 283
 284                         pinctrl_sb: pinctrl@18800 {
 285                                 compatible = "marvell,armada3710-sb-pinctrl",
 286                                              "syscon", "simple-mfd";
 287                                 reg = <0x18800 0x100>, <0x18C00 0x20>;
 288                                 /* MPP2[23:0] */
 289                                 gpiosb: gpio {
 290                                         #gpio-cells = <2>;
 291                                         gpio-ranges = <&pinctrl_sb 0 0 30>;
 292                                         gpio-controller;
 293                                         interrupt-controller;
 294                                         #interrupt-cells = <2>;
 295                                         interrupts =
 296                                         <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>,
 297                                         <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
 298                                         <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>,
 299                                         <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
 300                                         <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
 301                                 };
 302
 303                                 rgmii_pins: mii-pins {
 304                                         groups = "rgmii";
 305                                         function = "mii";
 306                                 };
 307
 308                                 smi_pins: smi-pins {
 309                                         groups = "smi";
 310                                         function = "smi";
 311                                 };
 312
 313                                 sdio_pins: sdio-pins {
 314                                         groups = "sdio_sb";
 315                                         function = "sdio";
 316                                 };
 317
 318                                 pcie_reset_pins: pcie-reset-pins {
 319                                         groups = "pcie1";
 320                                         function = "pcie";
 321                                 };
 322
 323                                 pcie_clkreq_pins: pcie-clkreq-pins {
 324                                         groups = "pcie1_clkreq";
 325                                         function = "pcie";
 326                                 };
 327                         };
 328
 329                         eth0: ethernet@30000 {
 330                                    compatible = "marvell,armada-3700-neta";
 331                                    reg = <0x30000 0x4000>;
 332                                    interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
 333                                    clocks = <&sb_periph_clk 8>;
 334                                    status = "disabled";
 335                         };
 336
 337                         mdio: mdio@32004 {
 338                                 #address-cells = <1>;
 339                                 #size-cells = <0>;
 340                                 compatible = "marvell,orion-mdio";
 341                                 reg = <0x32004 0x4>;
 342                         };
 343
 344                         eth1: ethernet@40000 {
 345                                 compatible = "marvell,armada-3700-neta";
 346                                 reg = <0x40000 0x4000>;
 347                                 interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
 348                                 clocks = <&sb_periph_clk 7>;
 349                                 status = "disabled";
 350                         };
 351
 352                         usb3: usb@58000 {
 353                                 compatible = "marvell,armada3700-xhci",
 354                                 "generic-xhci";
 355                                 reg = <0x58000 0x4000>;
 356                                 marvell,usb-misc-reg = <&usb32_syscon>;
 357                                 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
 358                                 clocks = <&sb_periph_clk 12>;
 359                                 phys = <&comphy0 0>, <&usb2_utmi_otg_phy>;
 360                                 phy-names = "usb3-phy", "usb2-utmi-otg-phy";
 361                                 status = "disabled";
 362                         };
 363
 364                         usb2_utmi_otg_phy: phy@5d000 {
 365                                 compatible = "marvell,a3700-utmi-otg-phy";
 366                                 reg = <0x5d000 0x800>;
 367                                 marvell,usb-misc-reg = <&usb32_syscon>;
 368                                 #phy-cells = <0>;
 369                         };
 370
 371                         usb32_syscon: system-controller@5d800 {
 372                                 compatible = "marvell,armada-3700-usb2-host-device-misc",
 373                                 "syscon";
 374                                 reg = <0x5d800 0x800>;
 375                         };
 376
 377                         usb2: usb@5e000 {
 378                                 compatible = "marvell,armada-3700-ehci";
 379                                 reg = <0x5e000 0x1000>;
 380                                 marvell,usb-misc-reg = <&usb2_syscon>;
 381                                 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
 382                                 phys = <&usb2_utmi_host_phy>;
 383                                 phy-names = "usb2-utmi-host-phy";
 384                                 status = "disabled";
 385                         };
 386
 387                         usb2_utmi_host_phy: phy@5f000 {
 388                                 compatible = "marvell,a3700-utmi-host-phy";
 389                                 reg = <0x5f000 0x800>;
 390                                 marvell,usb-misc-reg = <&usb2_syscon>;
 391                                 #phy-cells = <0>;
 392                         };
 393
 394                         usb2_syscon: system-controller@5f800 {
 395                                 compatible = "marvell,armada-3700-usb2-host-misc",
 396                                 "syscon";
 397                                 reg = <0x5f800 0x800>;
 398                         };
 399
 400                         xor@60900 {
 401                                 compatible = "marvell,armada-3700-xor";
 402                                 reg = <0x60900 0x100>,
 403                                       <0x60b00 0x100>;
 404
 405                                 xor10 {
 406                                         interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
 407                                 };
 408                                 xor11 {
 409                                         interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
 410                                 };
 411                         };
 412
 413                         crypto: crypto@90000 {
 414                                 compatible = "inside-secure,safexcel-eip97ies";
 415                                 reg = <0x90000 0x20000>;
 416                                 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
 417                                              <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>,
 418                                              <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
 419                                              <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>,
 420                                              <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>,
 421                                              <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
 422                                 interrupt-names = "mem", "ring0", "ring1",
 423                                                   "ring2", "ring3", "eip";
 424                                 clocks = <&nb_periph_clk 15>;
 425                         };
 426
 427                         rwtm: mailbox@b0000 {
 428                                 compatible = "marvell,armada-3700-rwtm-mailbox";
 429                                 reg = <0xb0000 0x100>;
 430                                 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
 431                                 #mbox-cells = <1>;
 432                         };
 433
 434                         sdhci1: sdhci@d0000 {
 435                                 compatible = "marvell,armada-3700-sdhci",
 436                                              "marvell,sdhci-xenon";
 437                                 reg = <0xd0000 0x300>,
 438                                       <0x1e808 0x4>;
 439                                 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
 440                                 clocks = <&nb_periph_clk 0>;
 441                                 clock-names = "core";
 442                                 status = "disabled";
 443                         };
 444
 445                         sdhci0: sdhci@d8000 {
 446                                 compatible = "marvell,armada-3700-sdhci",
 447                                              "marvell,sdhci-xenon";
 448                                 reg = <0xd8000 0x300>,
 449                                       <0x17808 0x4>;
 450                                 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
 451                                 clocks = <&nb_periph_clk 0>;
 452                                 clock-names = "core";
 453                                 status = "disabled";
 454                         };
 455
 456                         sata: sata@e0000 {
 457                                 compatible = "marvell,armada-3700-ahci";
 458                                 reg = <0xe0000 0x178>;
 459                                 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
 460                                 clocks = <&nb_periph_clk 1>;
 461                                 status = "disabled";
 462                         };
 463
 464                         gic: interrupt-controller@1d00000 {
 465                                 compatible = "arm,gic-v3";
 466                                 #interrupt-cells = <3>;
 467                                 interrupt-controller;
 468                                 reg = <0x1d00000 0x10000>, /* GICD */
 469                                       <0x1d40000 0x40000>, /* GICR */
 470                                       <0x1d80000 0x2000>,  /* GICC */
 471                                       <0x1d90000 0x2000>,  /* GICH */
 472                                       <0x1da0000 0x20000>; /* GICV */
 473                                 interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
 474                         };
 475                 };
 476
 477                 pcie0: pcie@d0070000 {
 478                         compatible = "marvell,armada-3700-pcie";
 479                         device_type = "pci";
 480                         status = "disabled";
 481                         reg = <0 0xd0070000 0 0x20000>;
 482                         #address-cells = <3>;
 483                         #size-cells = <2>;
 484                         bus-range = <0x00 0xff>;
 485                         interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
 486                         #interrupt-cells = <1>;
 487                         msi-parent = <&pcie0>;
 488                         msi-controller;
 489                         ranges = <0x82000000 0 0xe8000000   0 0xe8000000 0 0x1000000 /* Port 0 MEM */
 490                                   0x81000000 0 0xe9000000   0 0xe9000000 0 0x10000>; /* Port 0 IO*/
 491                         interrupt-map-mask = <0 0 0 7>;
 492                         interrupt-map = <0 0 0 1 &pcie_intc 0>,
 493                                         <0 0 0 2 &pcie_intc 1>,
 494                                         <0 0 0 3 &pcie_intc 2>,
 495                                         <0 0 0 4 &pcie_intc 3>;
 496                         pcie_intc: interrupt-controller {
 497                                 interrupt-controller;
 498                                 #interrupt-cells = <1>;
 499                         };
 500                 };
 501         };
 502 };