sys/cam/cam_periph.h

   1 /*-
   2  * Data structures and definitions for CAM peripheral ("type") drivers.
   3  *
   4  * SPDX-License-Identifier: BSD-2-Clause-FreeBSD
   5  *
   6  * Copyright (c) 1997, 1998 Justin T. Gibbs.
   7  * All rights reserved.
   8  *
   9  * Redistribution and use in source and binary forms, with or without
  10  * modification, are permitted provided that the following conditions
  11  * are met:
  12  * 1. Redistributions of source code must retain the above copyright
  13  *    notice, this list of conditions, and the following disclaimer,
  14  *    without modification, immediately at the beginning of the file.
  15  * 2. The name of the author may not be used to endorse or promote products
  16  *    derived from this software without specific prior written permission.
  17  *
  18  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  19  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  20  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  21  * ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
  22  * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  23  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  24  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  25  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  26  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  27  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  28  * SUCH DAMAGE.
  29  *
  30  * $FreeBSD$
  31  */
  32
  33 #ifndef _CAM_CAM_PERIPH_H
  34 #define _CAM_CAM_PERIPH_H 1
  35
  36 #include <sys/queue.h>
  37 #include <cam/cam_sim.h>
  38
  39 #ifdef _KERNEL
  40 #include <sys/lock.h>
  41 #include <sys/mutex.h>
  42 #include <sys/sysctl.h>
  43 #include <sys/taskqueue.h>
  44
  45 #include <cam/cam_xpt.h>
  46
  47 struct devstat;
  48
  49 extern struct cam_periph *xpt_periph;
  50
  51 extern struct periph_driver **periph_drivers;
  52 void periphdriver_register(void *);
  53 int periphdriver_unregister(void *);
  54 void periphdriver_init(int level);
  55
  56 #include <sys/module.h>
  57 #define PERIPHDRIVER_DECLARE(name, driver) \
  58         static int name ## _modevent(module_t mod, int type, void *data) \
  59         { \
  60                 switch (type) { \
  61                 case MOD_LOAD: \
  62                         periphdriver_register(data); \
  63                         break; \
  64                 case MOD_UNLOAD: \
  65                         return (periphdriver_unregister(data)); \
  66                 default: \
  67                         return EOPNOTSUPP; \
  68                 } \
  69                 return 0; \
  70         } \
  71         static moduledata_t name ## _mod = { \
  72                 #name, \
  73                 name ## _modevent, \
  74                 (void *)&driver \
  75         }; \
  76         DECLARE_MODULE(name, name ## _mod, SI_SUB_DRIVERS, SI_ORDER_ANY); \
  77         MODULE_DEPEND(name, cam, 1, 1, 1)
  78
  79 /*
  80  * Callback informing the peripheral driver it can perform it's
  81  * initialization since the XPT is now fully initialized.
  82  */
  83 typedef void (periph_init_t)(void);
  84
  85 /*
  86  * Callback requesting the peripheral driver to remove its instances
  87  * and shutdown, if possible.
  88  */
  89 typedef int (periph_deinit_t)(void);
  90
  91 struct periph_driver {
  92         periph_init_t           *init;
  93         char                    *driver_name;
  94         TAILQ_HEAD(,cam_periph)  units;
  95         u_int                    generation;
  96         u_int                    flags;
  97 #define CAM_PERIPH_DRV_EARLY            0x01
  98         periph_deinit_t         *deinit;
  99 };
 100
 101 typedef enum {
 102         CAM_PERIPH_BIO
 103 } cam_periph_type;
 104
 105 /* Generically useful offsets into the peripheral private area */
 106 #define ppriv_ptr0 periph_priv.entries[0].ptr
 107 #define ppriv_ptr1 periph_priv.entries[1].ptr
 108 #define ppriv_field0 periph_priv.entries[0].field
 109 #define ppriv_field1 periph_priv.entries[1].field
 110
 111 typedef void            periph_start_t (struct cam_periph *periph,
 112                                         union ccb *start_ccb);
 113 typedef cam_status      periph_ctor_t (struct cam_periph *periph,
 114                                        void *arg);
 115 typedef void            periph_oninv_t (struct cam_periph *periph);
 116 typedef void            periph_dtor_t (struct cam_periph *periph);
 117 struct cam_periph {
 118         periph_start_t          *periph_start;
 119         periph_oninv_t          *periph_oninval;
 120         periph_dtor_t           *periph_dtor;
 121         char                    *periph_name;
 122         struct cam_path         *path;  /* Compiled path to device */
 123         void                    *softc;
 124         struct cam_sim          *sim;
 125         u_int32_t                unit_number;
 126         cam_periph_type          type;
 127         u_int32_t                flags;
 128 #define CAM_PERIPH_RUNNING              0x01
 129 #define CAM_PERIPH_LOCKED               0x02
 130 #define CAM_PERIPH_LOCK_WANTED          0x04
 131 #define CAM_PERIPH_INVALID              0x08
 132 #define CAM_PERIPH_NEW_DEV_FOUND        0x10
 133 #define CAM_PERIPH_RECOVERY_INPROG      0x20
 134 #define CAM_PERIPH_RUN_TASK             0x40
 135 #define CAM_PERIPH_FREE                 0x80
 136 #define CAM_PERIPH_ANNOUNCED            0x100
 137         uint32_t                 scheduled_priority;
 138         uint32_t                 immediate_priority;
 139         int                      periph_allocating;
 140         int                      periph_allocated;
 141         u_int32_t                refcount;
 142         SLIST_HEAD(, ccb_hdr)    ccb_list;      /* For "immediate" requests */
 143         SLIST_ENTRY(cam_periph)  periph_links;
 144         TAILQ_ENTRY(cam_periph)  unit_links;
 145         ac_callback_t           *deferred_callback;
 146         ac_code                  deferred_ac;
 147         struct task              periph_run_task;
 148 };
 149
 150 #define CAM_PERIPH_MAXMAPS      2
 151
 152 struct cam_periph_map_info {
 153         int             num_bufs_used;
 154         void            *orig[CAM_PERIPH_MAXMAPS];
 155         struct buf      *bp[CAM_PERIPH_MAXMAPS];
 156 };
 157
 158 cam_status cam_periph_alloc(periph_ctor_t *periph_ctor,
 159                             periph_oninv_t *periph_oninvalidate,
 160                             periph_dtor_t *periph_dtor,
 161                             periph_start_t *periph_start,
 162                             char *name, cam_periph_type type, struct cam_path *,
 163                             ac_callback_t *, ac_code, void *arg);
 164 struct cam_periph *cam_periph_find(struct cam_path *path, char *name);
 165 int             cam_periph_list(struct cam_path *, struct sbuf *);
 166 int             cam_periph_acquire(struct cam_periph *periph);
 167 void            cam_periph_doacquire(struct cam_periph *periph);
 168 void            cam_periph_release(struct cam_periph *periph);
 169 void            cam_periph_release_locked(struct cam_periph *periph);
 170 void            cam_periph_release_locked_buses(struct cam_periph *periph);
 171 int             cam_periph_hold(struct cam_periph *periph, int priority);
 172 void            cam_periph_unhold(struct cam_periph *periph);
 173 void            cam_periph_invalidate(struct cam_periph *periph);
 174 int             cam_periph_mapmem(union ccb *ccb,
 175                                   struct cam_periph_map_info *mapinfo,
 176                                   u_int maxmap);
 177 void            cam_periph_unmapmem(union ccb *ccb,
 178                                     struct cam_periph_map_info *mapinfo);
 179 union ccb       *cam_periph_getccb(struct cam_periph *periph,
 180                                    u_int32_t priority);
 181 int             cam_periph_runccb(union ccb *ccb,
 182                                   int (*error_routine)(union ccb *ccb,
 183                                                        cam_flags camflags,
 184                                                        u_int32_t sense_flags),
 185                                   cam_flags camflags, u_int32_t sense_flags,
 186                                   struct devstat *ds);
 187 int             cam_periph_ioctl(struct cam_periph *periph, u_long cmd,
 188                                  caddr_t addr,
 189                                  int (*error_routine)(union ccb *ccb,
 190                                                       cam_flags camflags,
 191                                                       u_int32_t sense_flags));
 192 void            cam_freeze_devq(struct cam_path *path);
 193 u_int32_t       cam_release_devq(struct cam_path *path, u_int32_t relsim_flags,
 194                                  u_int32_t opening_reduction, u_int32_t arg,
 195                                  int getcount_only);
 196 void            cam_periph_async(struct cam_periph *periph, u_int32_t code,
 197                                  struct cam_path *path, void *arg);
 198 void            cam_periph_bus_settle(struct cam_periph *periph,
 199                                       u_int bus_settle_ms);
 200 void            cam_periph_freeze_after_event(struct cam_periph *periph,
 201                                               struct timeval* event_time,
 202                                               u_int duration_ms);
 203 int             cam_periph_error(union ccb *ccb, cam_flags camflags,
 204                                  u_int32_t sense_flags);
 205 int             cam_periph_invalidate_sysctl(SYSCTL_HANDLER_ARGS);
 206
 207 static __inline struct mtx *
 208 cam_periph_mtx(struct cam_periph *periph)
 209 {
 210         if (periph != NULL)
 211                 return (xpt_path_mtx(periph->path));
 212         else
 213                 return (NULL);
 214 }
 215
 216 #define cam_periph_owned(periph)                                        \
 217         mtx_owned(xpt_path_mtx((periph)->path))
 218
 219 #define cam_periph_lock(periph)                                         \
 220         mtx_lock(xpt_path_mtx((periph)->path))
 221
 222 #define cam_periph_unlock(periph)                                       \
 223         mtx_unlock(xpt_path_mtx((periph)->path))
 224
 225 #define cam_periph_assert(periph, what)                                 \
 226         mtx_assert(xpt_path_mtx((periph)->path), (what))
 227
 228 #define cam_periph_sleep(periph, chan, priority, wmesg, timo)           \
 229         xpt_path_sleep((periph)->path, (chan), (priority), (wmesg), (timo))
 230
 231 static inline struct cam_periph *
 232 cam_periph_acquire_first(struct periph_driver *driver)
 233 {
 234         struct cam_periph *periph;
 235
 236         xpt_lock_buses();
 237         periph = TAILQ_FIRST(&driver->units);
 238         while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0)
 239                 periph = TAILQ_NEXT(periph, unit_links);
 240         if (periph != NULL)
 241                 periph->refcount++;
 242         xpt_unlock_buses();
 243         return (periph);
 244 }
 245
 246 static inline struct cam_periph *
 247 cam_periph_acquire_next(struct cam_periph *pperiph)
 248 {
 249         struct cam_periph *periph = pperiph;
 250
 251         cam_periph_assert(pperiph, MA_NOTOWNED);
 252         xpt_lock_buses();
 253         do {
 254                 periph = TAILQ_NEXT(periph, unit_links);
 255         } while (periph != NULL && (periph->flags & CAM_PERIPH_INVALID) != 0);
 256         if (periph != NULL)
 257                 periph->refcount++;
 258         xpt_unlock_buses();
 259         cam_periph_release(pperiph);
 260         return (periph);
 261 }
 262
 263 #define CAM_PERIPH_FOREACH(periph, driver)                              \
 264         for ((periph) = cam_periph_acquire_first(driver);               \
 265             (periph) != NULL;                                           \
 266             (periph) = cam_periph_acquire_next(periph))
 267
 268 #define CAM_PERIPH_PRINT(p, msg, args...)                               \
 269     printf("%s%d:" msg, (periph)->periph_name, (periph)->unit_number, ##args)
 270
 271 #endif /* _KERNEL */
 272 #endif /* _CAM_CAM_PERIPH_H */