3 # On the handling of kernel options
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affects only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
34 AACRAID_DEBUG opt_aacraid.h
35 AHC_ALLOW_MEMIO opt_aic7xxx.h
36 AHC_TMODE_ENABLE opt_aic7xxx.h
37 AHC_DUMP_EEPROM opt_aic7xxx.h
38 AHC_DEBUG opt_aic7xxx.h
39 AHC_DEBUG_OPTS opt_aic7xxx.h
40 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
41 AHD_DEBUG opt_aic79xx.h
42 AHD_DEBUG_OPTS opt_aic79xx.h
43 AHD_TMODE_ENABLE opt_aic79xx.h
44 AHD_REG_PRETTY_PRINT opt_aic79xx.h
49 ALT_BREAK_TO_DEBUGGER opt_kdb.h
50 BREAK_TO_DEBUGGER opt_kdb.h
51 BUF_TRACKING opt_global.h
53 DDB_BUFR_SIZE opt_ddb.h
54 DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
55 DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
58 FULL_BUF_TRACKING opt_global.h
62 KDB_UNATTENDED opt_kdb.h
64 SYSCTL_DEBUG opt_sysctl.h
65 EARLY_PRINTF opt_global.h
66 TEXTDUMP_PREFERRED opt_ddb.h
67 TEXTDUMP_VERBOSE opt_ddb.h
68 NUM_CORE_FILES opt_global.h
70 TSLOGSIZE opt_global.h
72 # Miscellaneous options.
74 ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h
75 ATSE_CFI_HACK opt_cfi.h
77 BOOTHOWTO opt_global.h
78 BOOTVERBOSE opt_global.h
80 CAPABILITIES opt_capsicum.h
81 CAPABILITY_MODE opt_capsicum.h
82 COMPAT_43 opt_global.h
83 COMPAT_43TTY opt_global.h
84 COMPAT_FREEBSD4 opt_global.h
85 COMPAT_FREEBSD5 opt_global.h
86 COMPAT_FREEBSD6 opt_global.h
87 COMPAT_FREEBSD7 opt_global.h
88 COMPAT_FREEBSD9 opt_global.h
89 COMPAT_FREEBSD10 opt_global.h
90 COMPAT_FREEBSD11 opt_global.h
91 COMPAT_CLOUDABI32 opt_dontuse.h
92 COMPAT_CLOUDABI64 opt_dontuse.h
93 COMPAT_LINUXKPI opt_dontuse.h
94 _COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists
95 COMPILING_LINT opt_global.h
97 DEADLKRES opt_watchdog.h
98 EXPERIMENTAL opt_global.h
99 EXT_RESOURCES opt_global.h
101 FILEMON opt_dontuse.h
103 FULL_PREEMPTION opt_sched.h
105 IMAGACT_BINMISC opt_dontuse.h
106 IPI_PREEMPTION opt_sched.h
109 GEOM_CACHE opt_geom.h
110 GEOM_CONCAT opt_geom.h
114 GEOM_JOURNAL opt_geom.h
115 GEOM_LABEL opt_geom.h
116 GEOM_LABEL_GPT opt_geom.h
117 GEOM_LINUX_LVM opt_geom.h
120 GEOM_MIRROR opt_geom.h
121 GEOM_MOUNTVER opt_geom.h
122 GEOM_MULTIPATH opt_geom.h
124 GEOM_PART_APM opt_geom.h
125 GEOM_PART_BSD opt_geom.h
126 GEOM_PART_BSD64 opt_geom.h
127 GEOM_PART_EBR opt_geom.h
128 GEOM_PART_EBR_COMPAT opt_geom.h
129 GEOM_PART_GPT opt_geom.h
130 GEOM_PART_LDM opt_geom.h
131 GEOM_PART_MBR opt_geom.h
132 GEOM_PART_VTOC8 opt_geom.h
134 GEOM_RAID3 opt_geom.h
135 GEOM_SHSEC opt_geom.h
136 GEOM_STRIPE opt_geom.h
137 GEOM_SUNLABEL opt_geom.h
139 GEOM_UZIP_DEBUG opt_geom.h
140 GEOM_VINUM opt_geom.h
141 GEOM_VIRSTOR opt_geom.h
145 KDTRACE_HOOKS opt_global.h
146 KDTRACE_FRAME opt_kdtrace.h
147 KN_HASHSIZE opt_kqueue.h
152 KTRACE_REQUEST_POOL opt_ktrace.h
155 MAC_BIBA opt_dontuse.h
156 MAC_BSDEXTENDED opt_dontuse.h
157 MAC_IFOFF opt_dontuse.h
158 MAC_LOMAC opt_dontuse.h
159 MAC_MLS opt_dontuse.h
160 MAC_NONE opt_dontuse.h
161 MAC_NTPD opt_dontuse.h
162 MAC_PARTITION opt_dontuse.h
163 MAC_PORTACL opt_dontuse.h
164 MAC_SEEOTHERUIDS opt_dontuse.h
166 MAC_STUB opt_dontuse.h
167 MAC_TEST opt_dontuse.h
168 MAC_VERIEXEC opt_dontuse.h
169 MAC_VERIEXEC_SHA1 opt_dontuse.h
170 MAC_VERIEXEC_SHA256 opt_dontuse.h
171 MAC_VERIEXEC_SHA384 opt_dontuse.h
172 MAC_VERIEXEC_SHA512 opt_dontuse.h
174 MD_ROOT_FSTYPE opt_md.h
175 MD_ROOT_READONLY opt_md.h
176 MD_ROOT_SIZE opt_md.h
179 MFI_DECODE_LOG opt_mfi.h
180 MPROF_BUFFERS opt_mprof.h
181 MPROF_HASH_SIZE opt_mprof.h
182 NEW_PCIB opt_global.h
183 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
186 NO_EVENTTIMERS opt_timer.h
187 NO_OBSOLETE_CODE opt_global.h
188 NO_SYSCTL_DESCR opt_global.h
189 NSWBUF_MIN opt_swap.h
190 MBUF_PACKET_ZONE_DISABLE opt_global.h
191 PANIC_REBOOT_WAIT_TIME opt_panic.h
195 PPC_PROBE_CHIPSET opt_ppc.h
197 PREEMPTION opt_sched.h
199 SCHED_4BSD opt_sched.h
200 SCHED_STATS opt_sched.h
201 SCHED_ULE opt_sched.h
203 SLHCI_DEBUG opt_slhci.h
220 SHMMAXPGS opt_sysvipc.h
224 SYSVMSG opt_sysvipc.h
225 SYSVSEM opt_sysvipc.h
226 SYSVSHM opt_sysvipc.h
227 SW_WATCHDOG opt_watchdog.h
231 UMTX_CHAINS opt_global.h
235 # POSIX kernel options
236 P1003_1B_MQUEUE opt_posix.h
237 P1003_1B_SEMAPHORES opt_posix.h
238 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
240 # Do we want the config file compiled into the kernel?
241 INCLUDE_CONFIG_FILE opt_config.h
243 # Options for static filesystems. These should only be used at config
244 # time, since the corresponding lkms cannot work if there are any static
245 # dependencies. Unusability is enforced by hiding the defines for the
246 # options in a never-included header.
250 FDESCFS opt_dontuse.h
253 MSDOSFS opt_dontuse.h
257 PSEUDOFS opt_dontuse.h
261 UNIONFS opt_dontuse.h
265 PSEUDOFS_TRACE opt_pseudofs.h
268 KGSSAPI opt_kgssapi.h
269 KGSSAPI_DEBUG opt_kgssapi.h
271 # These static filesystems have one slightly bogus static dependency in
272 # sys/i386/i386/autoconf.c. If any of these filesystems are
273 # statically compiled into the kernel, code for mounting them as root
274 # filesystems will be enabled - but look below.
280 # filesystems and libiconv bridge
281 CD9660_ICONV opt_dontuse.h
282 MSDOSFS_ICONV opt_dontuse.h
283 UDF_ICONV opt_dontuse.h
285 # If you are following the conditions in the copyright,
286 # you can enable soft-updates which will speed up a lot of thigs
287 # and make the system safer from crashes at the same time.
288 # otherwise a STUB module will be compiled in.
289 SOFTUPDATES opt_ffs.h
291 # On small, embedded systems, it can be useful to turn off support for
292 # snapshots. It saves about 30-40k for a feature that would be lightly
293 # used, if it is used at all.
294 NO_FFS_SNAPSHOT opt_ffs.h
296 # Enabling this option turns on support for Access Control Lists in UFS,
297 # which can be used to support high security configurations. Depends on
301 # Enabling this option turns on support for extended attributes in UFS-based
302 # filesystems, which can be used to support high security configurations
303 # as well as new filesystem features.
304 UFS_EXTATTR opt_ufs.h
305 UFS_EXTATTR_AUTOSTART opt_ufs.h
307 # Enable fast hash lookups for large directories on UFS-based filesystems.
308 UFS_DIRHASH opt_ufs.h
310 # Enable gjournal-based UFS journal.
311 UFS_GJOURNAL opt_ufs.h
313 # The below sentence is not in English, and neither is this one.
314 # We plan to remove the static dependences above, with a
315 # <filesystem>_ROOT option to control if it usable as root. This list
316 # allows these options to be present in config files already (though
317 # they won't make any difference yet).
318 NFS_ROOT opt_nfsroot.h
323 # Enable netdump(4) client support.
326 # Options used only in subr_param.c.
331 VM_BCACHE_SIZE_MAX opt_param.h
332 VM_SWZONE_SIZE_MAX opt_param.h
338 # Generic SCSI options.
339 CAM_MAX_HIGHPOWER opt_cam.h
341 CAM_DEBUG_COMPILE opt_cam.h
342 CAM_DEBUG_DELAY opt_cam.h
343 CAM_DEBUG_BUS opt_cam.h
344 CAM_DEBUG_TARGET opt_cam.h
345 CAM_DEBUG_LUN opt_cam.h
346 CAM_DEBUG_FLAGS opt_cam.h
347 CAM_BOOT_DELAY opt_cam.h
348 CAM_IOSCHED_DYNAMIC opt_cam.h
349 CAM_TEST_FAILURE opt_cam.h
350 SCSI_DELAY opt_scsi.h
351 SCSI_NO_SENSE_STRINGS opt_scsi.h
352 SCSI_NO_OP_STRINGS opt_scsi.h
354 # Options used only in cam/ata/ata_da.c
355 ATA_STATIC_ID opt_ada.h
357 # Options used only in cam/scsi/scsi_cd.c
358 CHANGER_MIN_BUSY_SECONDS opt_cd.h
359 CHANGER_MAX_BUSY_SECONDS opt_cd.h
361 # Options used only in cam/scsi/scsi_da.c
362 DA_TRACK_REFS opt_da.h
364 # Options used only in cam/scsi/scsi_sa.c.
365 SA_IO_TIMEOUT opt_sa.h
366 SA_SPACE_TIMEOUT opt_sa.h
367 SA_REWIND_TIMEOUT opt_sa.h
368 SA_ERASE_TIMEOUT opt_sa.h
369 SA_1FM_AT_EOD opt_sa.h
371 # Options used only in cam/scsi/scsi_pt.c
372 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
374 # Options used only in cam/scsi/scsi_ses.c
375 SES_ENABLE_PASSTHROUGH opt_ses.h
377 # Options used in dev/sym/ (Symbios SCSI driver).
378 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
379 # disabled:0 (default), enabled:1
380 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
381 # disabled:0, enabled:1 (default)
382 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
383 # default:8, range:[1..64]
385 # Options used only in dev/isp/*
386 ISP_TARGET_MODE opt_isp.h
387 ISP_FW_CRASH_DUMP opt_isp.h
388 ISP_DEFAULT_ROLES opt_isp.h
389 ISP_INTERNAL_TARGET opt_isp.h
390 ISP_FCTAPE_OFF opt_isp.h
392 # Options used only in dev/iscsi
393 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
402 ALTQ_CODEL opt_altq.h
403 ALTQ_DEBUG opt_altq.h
405 ALTQ_FAIRQ opt_altq.h
406 ALTQ_NOPCC opt_altq.h
411 BOOTP_BLOCKSIZE opt_bootp.h
412 BOOTP_COMPAT opt_bootp.h
413 BOOTP_NFSROOT opt_bootp.h
414 BOOTP_NFSV3 opt_bootp.h
415 BOOTP_WIRED_TO opt_bootp.h
418 RATELIMIT opt_ratelimit.h
419 RATELIMIT_DEBUG opt_ratelimit.h
423 IPFILTER opt_ipfilter.h
424 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
425 IPFILTER_LOG opt_ipfilter.h
426 IPFILTER_LOOKUP opt_ipfilter.h
427 IPFIREWALL opt_ipfw.h
428 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
429 IPFIREWALL_NAT opt_ipfw.h
430 IPFIREWALL_NAT64 opt_ipfw.h
431 IPFIREWALL_NPTV6 opt_ipfw.h
432 IPFIREWALL_VERBOSE opt_ipfw.h
433 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
434 IPFIREWALL_PMOD opt_ipfw.h
436 IPSEC_DEBUG opt_ipsec.h
437 IPSEC_SUPPORT opt_ipsec.h
444 MROUTING opt_mrouting.h
446 PCBGROUP opt_pcbgroup.h
447 PF_DEFAULT_TO_DROP opt_pf.h
448 RADIX_MPATH opt_mpath.h
449 ROUTETABLES opt_route.h
451 SLIP_IFF_OPTS opt_slip.h
455 TCP_BLACKBOX opt_global.h
457 TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading
458 TCP_RFC7413 opt_inet.h
459 TCP_RFC7413_MAX_KEYS opt_inet.h
460 TCP_RFC7413_MAX_PSKS opt_inet.h
461 TCP_SIGNATURE opt_ipsec.h
462 VLAN_ARRAY opt_vlan.h
469 SCTP_DEBUG opt_sctp.h # Enable debug printfs
470 SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
471 SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
472 SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
473 SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
474 SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
475 SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
476 SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
477 SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
478 SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl
479 SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats
484 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
485 # Each netgraph node type can be either be compiled into the kernel
486 # or loaded dynamically. To get the former, include the corresponding
487 # option below. Each type has its own man page, e.g. ng_async(4).
489 NETGRAPH_DEBUG opt_netgraph.h
490 NETGRAPH_ASYNC opt_netgraph.h
491 NETGRAPH_ATMLLC opt_netgraph.h
492 NETGRAPH_ATM_ATMPIF opt_netgraph.h
493 NETGRAPH_BLUETOOTH opt_netgraph.h
494 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
495 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
496 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
497 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
498 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
499 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
500 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
501 NETGRAPH_BPF opt_netgraph.h
502 NETGRAPH_BRIDGE opt_netgraph.h
503 NETGRAPH_CAR opt_netgraph.h
504 NETGRAPH_CISCO opt_netgraph.h
505 NETGRAPH_DEFLATE opt_netgraph.h
506 NETGRAPH_DEVICE opt_netgraph.h
507 NETGRAPH_ECHO opt_netgraph.h
508 NETGRAPH_EIFACE opt_netgraph.h
509 NETGRAPH_ETHER opt_netgraph.h
510 NETGRAPH_ETHER_ECHO opt_netgraph.h
511 NETGRAPH_FEC opt_netgraph.h
512 NETGRAPH_FRAME_RELAY opt_netgraph.h
513 NETGRAPH_GIF opt_netgraph.h
514 NETGRAPH_GIF_DEMUX opt_netgraph.h
515 NETGRAPH_HOLE opt_netgraph.h
516 NETGRAPH_IFACE opt_netgraph.h
517 NETGRAPH_IP_INPUT opt_netgraph.h
518 NETGRAPH_IPFW opt_netgraph.h
519 NETGRAPH_KSOCKET opt_netgraph.h
520 NETGRAPH_L2TP opt_netgraph.h
521 NETGRAPH_LMI opt_netgraph.h
522 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
523 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
524 NETGRAPH_NAT opt_netgraph.h
525 NETGRAPH_NETFLOW opt_netgraph.h
526 NETGRAPH_ONE2MANY opt_netgraph.h
527 NETGRAPH_PATCH opt_netgraph.h
528 NETGRAPH_PIPE opt_netgraph.h
529 NETGRAPH_PPP opt_netgraph.h
530 NETGRAPH_PPPOE opt_netgraph.h
531 NETGRAPH_PPTPGRE opt_netgraph.h
532 NETGRAPH_PRED1 opt_netgraph.h
533 NETGRAPH_RFC1490 opt_netgraph.h
534 NETGRAPH_SOCKET opt_netgraph.h
535 NETGRAPH_SPLIT opt_netgraph.h
536 NETGRAPH_SPPP opt_netgraph.h
537 NETGRAPH_TAG opt_netgraph.h
538 NETGRAPH_TCPMSS opt_netgraph.h
539 NETGRAPH_TEE opt_netgraph.h
540 NETGRAPH_TTY opt_netgraph.h
541 NETGRAPH_UI opt_netgraph.h
542 NETGRAPH_VJC opt_netgraph.h
543 NETGRAPH_VLAN opt_netgraph.h
546 NGATM_ATM opt_netgraph.h
547 NGATM_ATMBASE opt_netgraph.h
548 NGATM_SSCOP opt_netgraph.h
549 NGATM_SSCFU opt_netgraph.h
550 NGATM_UNI opt_netgraph.h
551 NGATM_CCATM opt_netgraph.h
556 TI_SF_BUF_JUMBO opt_ti.h
557 TI_JUMBO_HDRSPLIT opt_ti.h
559 # Misc debug flags. Most of these should probably be replaced with
560 # 'DEBUG', and then let people recompile just the interesting modules
561 # with 'make CC="cc -DDEBUG"'.
562 CLUSTERDEBUG opt_debug_cluster.h
563 DEBUG_1284 opt_ppb_1284.h
566 PLIP_DEBUG opt_plip.h
567 LOCKF_DEBUG opt_debug_lockf.h
568 SI_DEBUG opt_debug_si.h
569 IFMEDIA_DEBUG opt_ifmedia.h
573 FB_INSTALL_CDEV opt_fb.h
575 # ppbus related options
576 PERIPH_1284 opt_ppb_1284.h
577 DONTPROBE_1284 opt_ppb_1284.h
579 # smbus related options
580 ENABLE_ALART opt_intpm.h
582 # These cause changes all over the kernel
583 BLKDEV_IOSIZE opt_global.h
584 BURN_BRIDGES opt_global.h
586 DEBUG_LOCKS opt_global.h
587 DEBUG_VFS_LOCKS opt_global.h
588 DFLTPHYS opt_global.h
589 DIAGNOSTIC opt_global.h
590 INVARIANT_SUPPORT opt_global.h
591 INVARIANTS opt_global.h
592 KASSERT_PANIC_OPTIONAL opt_global.h
594 MAXMEMDOM opt_global.h
596 MCLSHIFT opt_global.h
597 MUTEX_NOINLINE opt_global.h
598 LOCK_PROFILING opt_global.h
599 LOCK_PROFILING_FAST opt_global.h
601 REGRESSION opt_global.h
602 RWLOCK_NOINLINE opt_global.h
603 SX_NOINLINE opt_global.h
604 VFS_BIO_DEBUG opt_global.h
606 # These are VM related options
607 VM_KMEM_SIZE opt_vm.h
608 VM_KMEM_SIZE_SCALE opt_vm.h
609 VM_KMEM_SIZE_MAX opt_vm.h
610 VM_NRESERVLEVEL opt_vm.h
611 VM_LEVEL_0_ORDER opt_vm.h
613 MALLOC_MAKE_FAILURES opt_vm.h
614 MALLOC_PROFILE opt_vm.h
615 MALLOC_DEBUG_MAXZONES opt_vm.h
617 # The MemGuard replacement allocator used for tamper-after-free detection
618 DEBUG_MEMGUARD opt_vm.h
620 # The RedZone malloc(9) protection
621 DEBUG_REDZONE opt_vm.h
623 # Standard SMP options
624 EARLY_AP_STARTUP opt_global.h
628 # Size of the kernel message buffer
629 MSGBUF_SIZE opt_msgbuf.h
632 NFS_MINATTRTIMO opt_nfs.h
633 NFS_MAXATTRTIMO opt_nfs.h
634 NFS_MINDIRATTRTIMO opt_nfs.h
635 NFS_MAXDIRATTRTIMO opt_nfs.h
638 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
639 OVERRIDE_CARD opt_bktr.h
640 OVERRIDE_TUNER opt_bktr.h
641 OVERRIDE_DBX opt_bktr.h
642 OVERRIDE_MSP opt_bktr.h
643 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
644 BROOKTREE_ALLOC_PAGES opt_bktr.h
645 BKTR_OVERRIDE_CARD opt_bktr.h
646 BKTR_OVERRIDE_TUNER opt_bktr.h
647 BKTR_OVERRIDE_DBX opt_bktr.h
648 BKTR_OVERRIDE_MSP opt_bktr.h
649 BKTR_SYSTEM_DEFAULT opt_bktr.h
650 BKTR_ALLOC_PAGES opt_bktr.h
651 BKTR_USE_PLL opt_bktr.h
652 BKTR_GPIO_ACCESS opt_bktr.h
653 BKTR_NO_MSP_RESET opt_bktr.h
654 BKTR_430_FX_MODE opt_bktr.h
655 BKTR_SIS_VIA_MODE opt_bktr.h
656 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
657 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
659 # Options for uart(4)
660 UART_PPS_ON_CTS opt_uart.h
661 UART_POLL_FREQ opt_uart.h
662 UART_DEV_TOLERANCE_PCT opt_uart.h
664 # options for bus/device framework
667 # options for USB support
669 USB_HOST_ALIGN opt_usb.h
670 USB_REQ_DEBUG opt_usb.h
671 USB_TEMPLATE opt_usb.h
672 USB_VERBOSE opt_usb.h
673 USB_DMA_SINGLE_ALLOC opt_usb.h
674 USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
676 UKBD_DFLT_KEYMAP opt_ukbd.h
677 UPLCOM_INTR_INTERVAL opt_uplcom.h
678 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
679 UVSCOM_INTR_INTERVAL opt_uvscom.h
681 # options for the Realtek rtwn driver
682 RTWN_DEBUG opt_rtwn.h
683 RTWN_WITHOUT_UCODE opt_rtwn.h
685 # Embedded system options
691 PCFCLOCK_VERBOSE opt_pcfclock.h
692 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
697 KTR_CPUMASK opt_ktr.h
698 KTR_COMPILE opt_global.h
699 KTR_BOOT_ENTRIES opt_global.h
700 KTR_ENTRIES opt_global.h
701 KTR_VERBOSE opt_ktr.h
703 WITNESS_KDB opt_witness.h
704 WITNESS_NO_VNODE opt_witness.h
705 WITNESS_SKIPSPIN opt_witness.h
706 WITNESS_COUNT opt_witness.h
707 OPENSOLARIS_WITNESS opt_global.h
709 # options for ACPI support
710 ACPI_DEBUG opt_acpi.h
711 ACPI_MAX_TASKS opt_acpi.h
712 ACPI_MAX_THREADS opt_acpi.h
720 # various 'device presence' options.
723 DEV_NETMAP opt_global.h
728 DEV_RANDOM opt_global.h
729 DEV_SPLASH opt_splash.h
739 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
741 SOCKBUF_DEBUG opt_global.h
744 # options for ubsec driver
745 UBSEC_DEBUG opt_ubsec.h
746 UBSEC_RNDTEST opt_ubsec.h
747 UBSEC_NO_RNG opt_ubsec.h
749 # options for hifn driver
750 HIFN_DEBUG opt_hifn.h
751 HIFN_RNDTEST opt_hifn.h
753 # options for safenet driver
754 SAFE_DEBUG opt_safe.h
755 SAFE_NO_RNG opt_safe.h
756 SAFE_RNDTEST opt_safe.h
759 MAXCONS opt_syscons.h
760 SC_ALT_MOUSE_IMAGE opt_syscons.h
761 SC_CUT_SPACES2TABS opt_syscons.h
762 SC_CUT_SEPCHARS opt_syscons.h
763 SC_DEBUG_LEVEL opt_syscons.h
764 SC_DFLT_FONT opt_syscons.h
765 SC_DISABLE_KDBKEY opt_syscons.h
766 SC_DISABLE_REBOOT opt_syscons.h
767 SC_HISTORY_SIZE opt_syscons.h
768 SC_KERNEL_CONS_ATTR opt_syscons.h
769 SC_KERNEL_CONS_ATTRS opt_syscons.h
770 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
771 SC_MOUSE_CHAR opt_syscons.h
772 SC_NO_CUTPASTE opt_syscons.h
773 SC_NO_FONT_LOADING opt_syscons.h
774 SC_NO_HISTORY opt_syscons.h
775 SC_NO_MODE_CHANGE opt_syscons.h
776 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
777 SC_NO_SYSMOUSE opt_syscons.h
778 SC_NORM_ATTR opt_syscons.h
779 SC_NORM_REV_ATTR opt_syscons.h
780 SC_PIXEL_MODE opt_syscons.h
781 SC_RENDER_DEBUG opt_syscons.h
782 SC_TWOBUTTON_MOUSE opt_syscons.h
783 VT_ALT_TO_ESC_HACK opt_syscons.h
784 VT_FB_DEFAULT_WIDTH opt_syscons.h
785 VT_FB_DEFAULT_HEIGHT opt_syscons.h
786 VT_MAXWINDOWS opt_syscons.h
787 VT_TWOBUTTON_MOUSE opt_syscons.h
791 # teken terminal emulator options
792 TEKEN_CONS25 opt_teken.h
793 TEKEN_UTF8 opt_teken.h
794 TERMINAL_KERN_ATTR opt_teken.h
795 TERMINAL_NORM_ATTR opt_teken.h
798 PRINTF_BUFR_SIZE opt_printf.h
799 BOOT_TAG opt_printf.h
800 BOOT_TAG_SZ opt_printf.h
803 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
804 KBD_INSTALL_CDEV opt_kbd.h
805 KBD_MAXRETRY opt_kbd.h
806 KBD_MAXWAIT opt_kbd.h
807 KBD_RESETDELAY opt_kbd.h
808 KBDIO_DEBUG opt_kbd.h
810 KBDMUX_DFLT_KEYMAP opt_kbdmux.h
812 # options for the Atheros driver
816 ATH_DIAGAPI opt_ath.h
817 ATH_TX99_DIAG opt_ath.h
818 ATH_ENABLE_11N opt_ath.h
819 ATH_ENABLE_DFS opt_ath.h
820 ATH_EEPROM_FIRMWARE opt_ath.h
821 ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
822 ATH_DEBUG_ALQ opt_ath.h
823 ATH_KTR_INTR_DEBUG opt_ath.h
825 # options for the Atheros hal
826 AH_SUPPORT_AR5416 opt_ah.h
827 # XXX For now, this breaks non-AR9130 chipsets, so only use it
828 # XXX when actually targeting AR9130.
829 AH_SUPPORT_AR9130 opt_ah.h
831 # This is required for AR933x SoC support
832 AH_SUPPORT_AR9330 opt_ah.h
833 AH_SUPPORT_AR9340 opt_ah.h
834 AH_SUPPORT_QCA9530 opt_ah.h
835 AH_SUPPORT_QCA9550 opt_ah.h
839 AH_DEBUG_ALQ opt_ah.h
840 AH_REGOPS_FUNC opt_ah.h
841 AH_WRITE_REGDOMAIN opt_ah.h
842 AH_DEBUG_COUNTRY opt_ah.h
843 AH_WRITE_EEPROM opt_ah.h
844 AH_PRIVATE_DIAG opt_ah.h
845 AH_NEED_DESC_SWAP opt_ah.h
846 AH_USE_INIPDGAIN opt_ah.h
848 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
849 AH_INTERRUPT_DEBUGGING opt_ah.h
850 # AR5416 and later interrupt mitigation
851 # XXX do not use this for AR9130
852 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
854 # options for the Broadcom BCM43xx driver (bwi)
856 BWI_DEBUG_VERBOSE opt_bwi.h
858 # options for the Brodacom BCM43xx driver (bwn)
860 BWN_GPL_PHY opt_bwn.h
861 BWN_USE_SIBA opt_bwn.h
863 # Options for the SIBA driver
864 SIBA_DEBUG opt_siba.h
866 # options for the Marvell 8335 wireless driver
867 MALO_DEBUG opt_malo.h
868 MALO_TXBUF opt_malo.h
869 MALO_RXBUF opt_malo.h
871 # options for the Marvell wireless driver
875 MWL_DIAGAPI opt_mwl.h
876 MWL_AGGR_SIZE opt_mwl.h
877 MWL_TX_NODROP opt_mwl.h
879 # Options for the Marvell NETA driver
880 MVNETA_MULTIQUEUE opt_mvneta.h
881 MVNETA_KTR opt_mvneta.h
883 # Options for the Intel 802.11ac wireless driver
886 # Options for the Intel 802.11n wireless driver
889 # Options for the Intel 3945ABG wireless driver
893 DCONS_BUF_SIZE opt_dcons.h
894 DCONS_POLL_HZ opt_dcons.h
895 DCONS_FORCE_CONSOLE opt_dcons.h
896 DCONS_FORCE_GDB opt_dcons.h
899 HWPMC_DEBUG opt_global.h
901 HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h
903 # 802.11 support layer
904 IEEE80211_DEBUG opt_wlan.h
905 IEEE80211_DEBUG_REFCNT opt_wlan.h
906 IEEE80211_AMPDU_AGE opt_wlan.h
907 IEEE80211_SUPPORT_MESH opt_wlan.h
908 IEEE80211_SUPPORT_SUPERG opt_wlan.h
909 IEEE80211_SUPPORT_TDMA opt_wlan.h
910 IEEE80211_ALQ opt_wlan.h
911 IEEE80211_DFS_DEBUG opt_wlan.h
913 # 802.11 TDMA support
914 TDMA_SLOTLEN_DEFAULT opt_tdma.h
915 TDMA_SLOTCNT_DEFAULT opt_tdma.h
916 TDMA_BINTVAL_DEFAULT opt_tdma.h
917 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
918 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
919 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
920 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
921 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
922 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
923 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
924 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
927 PICKMODE_DEBUG opt_videomode.h
929 # Network stack virtualization options
931 VNET_DEBUG opt_global.h
933 # Common Flash Interface (CFI) options
934 CFI_SUPPORT_STRATAFLASH opt_cfi.h
935 CFI_ARMEDANDDANGEROUS opt_cfi.h
936 CFI_HARDWAREBYTESWAP opt_cfi.h
940 SND_DIAGNOSTIC opt_snd.h
941 SND_FEEDER_MULTIFORMAT opt_snd.h
942 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
943 SND_FEEDER_RATE_HP opt_snd.h
945 SND_OLDSTEREO opt_snd.h
949 # Flattened device tree options
951 FDT_DTB_STATIC opt_platform.h
953 # OFED Infiniband stack
955 OFED_DEBUG_INIT opt_ofed.h
959 IPOIB_DEBUG opt_ofed.h
962 # Resource Accounting
964 RACCT_DEFAULT_TO_DISABLED opt_global.h
969 # Random number generator(s)
970 # With this, no entropy processor is loaded, but the entropy
971 # harvesting infrastructure is present. This means an entropy
972 # processor may be loaded as a module.
973 RANDOM_LOADABLE opt_global.h
974 # This turns on high-rate and potentially expensive harvesting in
975 # the uma slab allocator.
976 RANDOM_ENABLE_UMA opt_global.h
977 RANDOM_ENABLE_ETHER opt_global.h
980 BHND_LOGLEVEL opt_global.h
982 # GPIO and child devices
983 GPIO_SPI_DEBUG opt_gpio.h
986 SPIGEN_LEGACY_CDEVNAME opt_spi.h
988 # etherswitch(4) driver
989 RTL8366_SOFT_RESET opt_etherswitch.h
991 # evdev protocol support
992 EVDEV_SUPPORT opt_evdev.h
993 EVDEV_DEBUG opt_evdev.h
994 UINPUT_DEBUG opt_evdev.h
996 # Hyper-V network driver
999 # CAM-based MMC stack
1001 # Encrypted kernel crash dumps
1005 NVME_USE_NVD opt_nvme.h
1008 AMDSBWD_DEBUG opt_amdsbwd.h