3 # On the handling of kernel options
5 # All kernel options should be listed in NOTES, with suitable
6 # descriptions. Negative options (options that make some code not
7 # compile) should be commented out; LINT (generated from NOTES) should
8 # compile as much code as possible. Try to structure option-using
9 # code so that a single option only switch code on, or only switch
10 # code off, to make it possible to have a full compile-test. If
11 # necessary, you can check for COMPILING_LINT to get maximum code
14 # All new options shall also be listed in either "conf/options" or
15 # "conf/options.<machine>". Options that affect a single source-file
16 # <xxx>.[c|s] should be directed into "opt_<xxx>.h", while options
17 # that affect multiple files should either go in "opt_global.h" if
18 # this is a kernel-wide option (used just about everywhere), or in
19 # "opt_<option-name-in-lower-case>.h" if it affects only some files.
20 # Note that the effect of listing only an option without a
21 # header-file-name in conf/options (and cousins) is that the last
22 # convention is followed.
24 # This handling scheme is not yet fully implemented.
27 # Format of this file:
28 # Option name filename
30 # If filename is missing, the default is
31 # opt_<name-of-option-in-lower-case>.h
34 AACRAID_DEBUG opt_aacraid.h
35 AHC_ALLOW_MEMIO opt_aic7xxx.h
36 AHC_TMODE_ENABLE opt_aic7xxx.h
37 AHC_DUMP_EEPROM opt_aic7xxx.h
38 AHC_DEBUG opt_aic7xxx.h
39 AHC_DEBUG_OPTS opt_aic7xxx.h
40 AHC_REG_PRETTY_PRINT opt_aic7xxx.h
41 AHD_DEBUG opt_aic79xx.h
42 AHD_DEBUG_OPTS opt_aic79xx.h
43 AHD_TMODE_ENABLE opt_aic79xx.h
44 AHD_REG_PRETTY_PRINT opt_aic79xx.h
49 ALT_BREAK_TO_DEBUGGER opt_kdb.h
50 BREAK_TO_DEBUGGER opt_kdb.h
51 BUF_TRACKING opt_global.h
53 DDB_BUFR_SIZE opt_ddb.h
54 DDB_CAPTURE_DEFAULTBUFSIZE opt_ddb.h
55 DDB_CAPTURE_MAXBUFSIZE opt_ddb.h
58 FULL_BUF_TRACKING opt_global.h
62 KDB_UNATTENDED opt_kdb.h
64 SYSCTL_DEBUG opt_sysctl.h
65 EARLY_PRINTF opt_global.h
66 TEXTDUMP_PREFERRED opt_ddb.h
67 TEXTDUMP_VERBOSE opt_ddb.h
68 NUM_CORE_FILES opt_global.h
70 TSLOGSIZE opt_global.h
72 # Miscellaneous options.
74 ALTERA_SDCARD_FAST_SIM opt_altera_sdcard.h
75 ATSE_CFI_HACK opt_cfi.h
77 BOOTHOWTO opt_global.h
78 BOOTVERBOSE opt_global.h
80 CAPABILITIES opt_capsicum.h
81 CAPABILITY_MODE opt_capsicum.h
82 COMPAT_43 opt_global.h
83 COMPAT_43TTY opt_global.h
84 COMPAT_FREEBSD4 opt_global.h
85 COMPAT_FREEBSD5 opt_global.h
86 COMPAT_FREEBSD6 opt_global.h
87 COMPAT_FREEBSD7 opt_global.h
88 COMPAT_FREEBSD9 opt_global.h
89 COMPAT_FREEBSD10 opt_global.h
90 COMPAT_FREEBSD11 opt_global.h
91 COMPAT_CLOUDABI32 opt_dontuse.h
92 COMPAT_CLOUDABI64 opt_dontuse.h
93 COMPAT_LINUXKPI opt_dontuse.h
94 _COMPAT_LINUX32 opt_compat.h # XXX: make sure opt_compat.h exists
95 COMPILING_LINT opt_global.h
97 DEADLKRES opt_watchdog.h
98 EXT_RESOURCES opt_global.h
100 FILEMON opt_dontuse.h
102 FULL_PREEMPTION opt_sched.h
104 IMAGACT_BINMISC opt_dontuse.h
105 IPI_PREEMPTION opt_sched.h
108 GEOM_CACHE opt_geom.h
109 GEOM_CONCAT opt_geom.h
113 GEOM_JOURNAL opt_geom.h
114 GEOM_LABEL opt_geom.h
115 GEOM_LABEL_GPT opt_geom.h
116 GEOM_LINUX_LVM opt_geom.h
119 GEOM_MIRROR opt_geom.h
120 GEOM_MOUNTVER opt_geom.h
121 GEOM_MULTIPATH opt_geom.h
123 GEOM_PART_APM opt_geom.h
124 GEOM_PART_BSD opt_geom.h
125 GEOM_PART_BSD64 opt_geom.h
126 GEOM_PART_EBR opt_geom.h
127 GEOM_PART_EBR_COMPAT opt_geom.h
128 GEOM_PART_GPT opt_geom.h
129 GEOM_PART_LDM opt_geom.h
130 GEOM_PART_MBR opt_geom.h
131 GEOM_PART_VTOC8 opt_geom.h
133 GEOM_RAID3 opt_geom.h
134 GEOM_SHSEC opt_geom.h
135 GEOM_STRIPE opt_geom.h
136 GEOM_SUNLABEL opt_geom.h
138 GEOM_UZIP_DEBUG opt_geom.h
139 GEOM_VINUM opt_geom.h
140 GEOM_VIRSTOR opt_geom.h
144 KDTRACE_HOOKS opt_global.h
145 KDTRACE_FRAME opt_kdtrace.h
146 KN_HASHSIZE opt_kqueue.h
151 KTRACE_REQUEST_POOL opt_ktrace.h
154 MAC_BIBA opt_dontuse.h
155 MAC_BSDEXTENDED opt_dontuse.h
156 MAC_IFOFF opt_dontuse.h
157 MAC_LOMAC opt_dontuse.h
158 MAC_MLS opt_dontuse.h
159 MAC_NONE opt_dontuse.h
160 MAC_NTPD opt_dontuse.h
161 MAC_PARTITION opt_dontuse.h
162 MAC_PORTACL opt_dontuse.h
163 MAC_SEEOTHERUIDS opt_dontuse.h
165 MAC_STUB opt_dontuse.h
166 MAC_TEST opt_dontuse.h
167 MAC_VERIEXEC opt_dontuse.h
168 MAC_VERIEXEC_SHA1 opt_dontuse.h
169 MAC_VERIEXEC_SHA256 opt_dontuse.h
170 MAC_VERIEXEC_SHA384 opt_dontuse.h
171 MAC_VERIEXEC_SHA512 opt_dontuse.h
173 MD_ROOT_FSTYPE opt_md.h
174 MD_ROOT_READONLY opt_md.h
175 MD_ROOT_SIZE opt_md.h
178 MFI_DECODE_LOG opt_mfi.h
179 MPROF_BUFFERS opt_mprof.h
180 MPROF_HASH_SIZE opt_mprof.h
181 NEW_PCIB opt_global.h
182 NO_ADAPTIVE_MUTEXES opt_adaptive_mutexes.h
185 NO_EVENTTIMERS opt_timer.h
186 NO_OBSOLETE_CODE opt_global.h
187 NO_SYSCTL_DESCR opt_global.h
188 NSWBUF_MIN opt_swap.h
189 MBUF_PACKET_ZONE_DISABLE opt_global.h
190 PANIC_REBOOT_WAIT_TIME opt_panic.h
194 PPC_PROBE_CHIPSET opt_ppc.h
196 PREEMPTION opt_sched.h
198 SCHED_4BSD opt_sched.h
199 SCHED_STATS opt_sched.h
200 SCHED_ULE opt_sched.h
202 SLHCI_DEBUG opt_slhci.h
219 SHMMAXPGS opt_sysvipc.h
223 SYSVMSG opt_sysvipc.h
224 SYSVSEM opt_sysvipc.h
225 SYSVSHM opt_sysvipc.h
226 SW_WATCHDOG opt_watchdog.h
230 UMTX_CHAINS opt_global.h
234 # POSIX kernel options
235 P1003_1B_MQUEUE opt_posix.h
236 P1003_1B_SEMAPHORES opt_posix.h
237 _KPOSIX_PRIORITY_SCHEDULING opt_posix.h
239 # Do we want the config file compiled into the kernel?
240 INCLUDE_CONFIG_FILE opt_config.h
242 # Options for static filesystems. These should only be used at config
243 # time, since the corresponding lkms cannot work if there are any static
244 # dependencies. Unusability is enforced by hiding the defines for the
245 # options in a never-included header.
249 FDESCFS opt_dontuse.h
252 MSDOSFS opt_dontuse.h
256 PSEUDOFS opt_dontuse.h
260 UNIONFS opt_dontuse.h
264 PSEUDOFS_TRACE opt_pseudofs.h
267 KGSSAPI opt_kgssapi.h
268 KGSSAPI_DEBUG opt_kgssapi.h
270 # These static filesystems have one slightly bogus static dependency in
271 # sys/i386/i386/autoconf.c. If any of these filesystems are
272 # statically compiled into the kernel, code for mounting them as root
273 # filesystems will be enabled - but look below.
279 # filesystems and libiconv bridge
280 CD9660_ICONV opt_dontuse.h
281 MSDOSFS_ICONV opt_dontuse.h
282 UDF_ICONV opt_dontuse.h
284 # If you are following the conditions in the copyright,
285 # you can enable soft-updates which will speed up a lot of thigs
286 # and make the system safer from crashes at the same time.
287 # otherwise a STUB module will be compiled in.
288 SOFTUPDATES opt_ffs.h
290 # On small, embedded systems, it can be useful to turn off support for
291 # snapshots. It saves about 30-40k for a feature that would be lightly
292 # used, if it is used at all.
293 NO_FFS_SNAPSHOT opt_ffs.h
295 # Enabling this option turns on support for Access Control Lists in UFS,
296 # which can be used to support high security configurations. Depends on
300 # Enabling this option turns on support for extended attributes in UFS-based
301 # filesystems, which can be used to support high security configurations
302 # as well as new filesystem features.
303 UFS_EXTATTR opt_ufs.h
304 UFS_EXTATTR_AUTOSTART opt_ufs.h
306 # Enable fast hash lookups for large directories on UFS-based filesystems.
307 UFS_DIRHASH opt_ufs.h
309 # Enable gjournal-based UFS journal.
310 UFS_GJOURNAL opt_ufs.h
312 # The below sentence is not in English, and neither is this one.
313 # We plan to remove the static dependences above, with a
314 # <filesystem>_ROOT option to control if it usable as root. This list
315 # allows these options to be present in config files already (though
316 # they won't make any difference yet).
317 NFS_ROOT opt_nfsroot.h
322 # Enable netdump(4) client support.
325 # Options used only in subr_param.c.
330 VM_BCACHE_SIZE_MAX opt_param.h
331 VM_SWZONE_SIZE_MAX opt_param.h
337 # Generic SCSI options.
338 CAM_MAX_HIGHPOWER opt_cam.h
340 CAM_DEBUG_COMPILE opt_cam.h
341 CAM_DEBUG_DELAY opt_cam.h
342 CAM_DEBUG_BUS opt_cam.h
343 CAM_DEBUG_TARGET opt_cam.h
344 CAM_DEBUG_LUN opt_cam.h
345 CAM_DEBUG_FLAGS opt_cam.h
346 CAM_BOOT_DELAY opt_cam.h
347 CAM_IOSCHED_DYNAMIC opt_cam.h
348 CAM_TEST_FAILURE opt_cam.h
349 SCSI_DELAY opt_scsi.h
350 SCSI_NO_SENSE_STRINGS opt_scsi.h
351 SCSI_NO_OP_STRINGS opt_scsi.h
353 # Options used only in cam/ata/ata_da.c
354 ATA_STATIC_ID opt_ada.h
356 # Options used only in cam/scsi/scsi_cd.c
357 CHANGER_MIN_BUSY_SECONDS opt_cd.h
358 CHANGER_MAX_BUSY_SECONDS opt_cd.h
360 # Options used only in cam/scsi/scsi_da.c
361 DA_TRACK_REFS opt_da.h
363 # Options used only in cam/scsi/scsi_sa.c.
364 SA_IO_TIMEOUT opt_sa.h
365 SA_SPACE_TIMEOUT opt_sa.h
366 SA_REWIND_TIMEOUT opt_sa.h
367 SA_ERASE_TIMEOUT opt_sa.h
368 SA_1FM_AT_EOD opt_sa.h
370 # Options used only in cam/scsi/scsi_pt.c
371 SCSI_PT_DEFAULT_TIMEOUT opt_pt.h
373 # Options used only in cam/scsi/scsi_ses.c
374 SES_ENABLE_PASSTHROUGH opt_ses.h
376 # Options used in dev/sym/ (Symbios SCSI driver).
377 SYM_SETUP_LP_PROBE_MAP opt_sym.h #-Low Priority Probe Map (bits)
378 # Allows the ncr to take precedence
379 # 1 (1<<0) -> 810a, 860
380 # 2 (1<<1) -> 825a, 875, 885, 895
381 # 4 (1<<2) -> 895a, 896, 1510d
382 SYM_SETUP_SCSI_DIFF opt_sym.h #-HVD support for 825a, 875, 885
383 # disabled:0 (default), enabled:1
384 SYM_SETUP_PCI_PARITY opt_sym.h #-PCI parity checking
385 # disabled:0, enabled:1 (default)
386 SYM_SETUP_MAX_LUN opt_sym.h #-Number of LUNs supported
387 # default:8, range:[1..64]
389 # Options used only in dev/ncr/*
390 SCSI_NCR_DEBUG opt_ncr.h
391 SCSI_NCR_MAX_SYNC opt_ncr.h
392 SCSI_NCR_MAX_WIDE opt_ncr.h
393 SCSI_NCR_MYADDR opt_ncr.h
395 # Options used only in dev/isp/*
396 ISP_TARGET_MODE opt_isp.h
397 ISP_FW_CRASH_DUMP opt_isp.h
398 ISP_DEFAULT_ROLES opt_isp.h
399 ISP_INTERNAL_TARGET opt_isp.h
400 ISP_FCTAPE_OFF opt_isp.h
402 # Options used only in dev/iscsi
403 ISCSI_INITIATOR_DEBUG opt_iscsi_initiator.h
412 ALTQ_CODEL opt_altq.h
413 ALTQ_DEBUG opt_altq.h
415 ALTQ_FAIRQ opt_altq.h
416 ALTQ_NOPCC opt_altq.h
421 BOOTP_BLOCKSIZE opt_bootp.h
422 BOOTP_COMPAT opt_bootp.h
423 BOOTP_NFSROOT opt_bootp.h
424 BOOTP_NFSV3 opt_bootp.h
425 BOOTP_WIRED_TO opt_bootp.h
428 RATELIMIT opt_ratelimit.h
429 RATELIMIT_DEBUG opt_ratelimit.h
433 IPFILTER opt_ipfilter.h
434 IPFILTER_DEFAULT_BLOCK opt_ipfilter.h
435 IPFILTER_LOG opt_ipfilter.h
436 IPFILTER_LOOKUP opt_ipfilter.h
437 IPFIREWALL opt_ipfw.h
438 IPFIREWALL_DEFAULT_TO_ACCEPT opt_ipfw.h
439 IPFIREWALL_NAT opt_ipfw.h
440 IPFIREWALL_NAT64 opt_ipfw.h
441 IPFIREWALL_NPTV6 opt_ipfw.h
442 IPFIREWALL_VERBOSE opt_ipfw.h
443 IPFIREWALL_VERBOSE_LIMIT opt_ipfw.h
444 IPFIREWALL_PMOD opt_ipfw.h
446 IPSEC_DEBUG opt_ipsec.h
447 IPSEC_SUPPORT opt_ipsec.h
454 MROUTING opt_mrouting.h
456 PCBGROUP opt_pcbgroup.h
457 PF_DEFAULT_TO_DROP opt_pf.h
458 RADIX_MPATH opt_mpath.h
459 ROUTETABLES opt_route.h
461 SLIP_IFF_OPTS opt_slip.h
465 TCP_BLACKBOX opt_global.h
467 TCP_OFFLOAD opt_inet.h # Enable code to dispatch TCP offloading
468 TCP_RFC7413 opt_inet.h
469 TCP_RFC7413_MAX_KEYS opt_inet.h
470 TCP_RFC7413_MAX_PSKS opt_inet.h
471 TCP_SIGNATURE opt_ipsec.h
472 VLAN_ARRAY opt_vlan.h
479 SCTP_DEBUG opt_sctp.h # Enable debug printfs
480 SCTP_LOCK_LOGGING opt_sctp.h # Log to KTR lock activity
481 SCTP_MBUF_LOGGING opt_sctp.h # Log to KTR general mbuf aloc/free
482 SCTP_MBCNT_LOGGING opt_sctp.h # Log to KTR mbcnt activity
483 SCTP_PACKET_LOGGING opt_sctp.h # Log to a packet buffer last N packets
484 SCTP_LTRACE_CHUNKS opt_sctp.h # Log to KTR chunks processed
485 SCTP_LTRACE_ERRORS opt_sctp.h # Log to KTR error returns.
486 SCTP_USE_PERCPU_STAT opt_sctp.h # Use per cpu stats.
487 SCTP_MCORE_INPUT opt_sctp.h # Have multiple input threads for input mbufs
488 SCTP_LOCAL_TRACE_BUF opt_sctp.h # Use tracebuffer exported via sysctl
489 SCTP_DETAILED_STR_STATS opt_sctp.h # Use per PR-SCTP policy stream stats
494 # Netgraph(4). Use option NETGRAPH to enable the base netgraph code.
495 # Each netgraph node type can be either be compiled into the kernel
496 # or loaded dynamically. To get the former, include the corresponding
497 # option below. Each type has its own man page, e.g. ng_async(4).
499 NETGRAPH_DEBUG opt_netgraph.h
500 NETGRAPH_ASYNC opt_netgraph.h
501 NETGRAPH_ATMLLC opt_netgraph.h
502 NETGRAPH_ATM_ATMPIF opt_netgraph.h
503 NETGRAPH_BLUETOOTH opt_netgraph.h
504 NETGRAPH_BLUETOOTH_BT3C opt_netgraph.h
505 NETGRAPH_BLUETOOTH_H4 opt_netgraph.h
506 NETGRAPH_BLUETOOTH_HCI opt_netgraph.h
507 NETGRAPH_BLUETOOTH_L2CAP opt_netgraph.h
508 NETGRAPH_BLUETOOTH_SOCKET opt_netgraph.h
509 NETGRAPH_BLUETOOTH_UBT opt_netgraph.h
510 NETGRAPH_BLUETOOTH_UBTBCMFW opt_netgraph.h
511 NETGRAPH_BPF opt_netgraph.h
512 NETGRAPH_BRIDGE opt_netgraph.h
513 NETGRAPH_CAR opt_netgraph.h
514 NETGRAPH_CISCO opt_netgraph.h
515 NETGRAPH_DEFLATE opt_netgraph.h
516 NETGRAPH_DEVICE opt_netgraph.h
517 NETGRAPH_ECHO opt_netgraph.h
518 NETGRAPH_EIFACE opt_netgraph.h
519 NETGRAPH_ETHER opt_netgraph.h
520 NETGRAPH_ETHER_ECHO opt_netgraph.h
521 NETGRAPH_FEC opt_netgraph.h
522 NETGRAPH_FRAME_RELAY opt_netgraph.h
523 NETGRAPH_GIF opt_netgraph.h
524 NETGRAPH_GIF_DEMUX opt_netgraph.h
525 NETGRAPH_HOLE opt_netgraph.h
526 NETGRAPH_IFACE opt_netgraph.h
527 NETGRAPH_IP_INPUT opt_netgraph.h
528 NETGRAPH_IPFW opt_netgraph.h
529 NETGRAPH_KSOCKET opt_netgraph.h
530 NETGRAPH_L2TP opt_netgraph.h
531 NETGRAPH_LMI opt_netgraph.h
532 NETGRAPH_MPPC_COMPRESSION opt_netgraph.h
533 NETGRAPH_MPPC_ENCRYPTION opt_netgraph.h
534 NETGRAPH_NAT opt_netgraph.h
535 NETGRAPH_NETFLOW opt_netgraph.h
536 NETGRAPH_ONE2MANY opt_netgraph.h
537 NETGRAPH_PATCH opt_netgraph.h
538 NETGRAPH_PIPE opt_netgraph.h
539 NETGRAPH_PPP opt_netgraph.h
540 NETGRAPH_PPPOE opt_netgraph.h
541 NETGRAPH_PPTPGRE opt_netgraph.h
542 NETGRAPH_PRED1 opt_netgraph.h
543 NETGRAPH_RFC1490 opt_netgraph.h
544 NETGRAPH_SOCKET opt_netgraph.h
545 NETGRAPH_SPLIT opt_netgraph.h
546 NETGRAPH_SPPP opt_netgraph.h
547 NETGRAPH_TAG opt_netgraph.h
548 NETGRAPH_TCPMSS opt_netgraph.h
549 NETGRAPH_TEE opt_netgraph.h
550 NETGRAPH_TTY opt_netgraph.h
551 NETGRAPH_UI opt_netgraph.h
552 NETGRAPH_VJC opt_netgraph.h
553 NETGRAPH_VLAN opt_netgraph.h
556 NGATM_ATM opt_netgraph.h
557 NGATM_ATMBASE opt_netgraph.h
558 NGATM_SSCOP opt_netgraph.h
559 NGATM_SSCFU opt_netgraph.h
560 NGATM_UNI opt_netgraph.h
561 NGATM_CCATM opt_netgraph.h
566 TI_SF_BUF_JUMBO opt_ti.h
567 TI_JUMBO_HDRSPLIT opt_ti.h
569 # DPT driver debug flags
570 DPT_MEASURE_PERFORMANCE opt_dpt.h
571 DPT_RESET_HBA opt_dpt.h
573 # Misc debug flags. Most of these should probably be replaced with
574 # 'DEBUG', and then let people recompile just the interesting modules
575 # with 'make CC="cc -DDEBUG"'.
576 CLUSTERDEBUG opt_debug_cluster.h
577 DEBUG_1284 opt_ppb_1284.h
580 PLIP_DEBUG opt_plip.h
581 LOCKF_DEBUG opt_debug_lockf.h
582 SI_DEBUG opt_debug_si.h
583 IFMEDIA_DEBUG opt_ifmedia.h
587 FB_INSTALL_CDEV opt_fb.h
589 # ppbus related options
590 PERIPH_1284 opt_ppb_1284.h
591 DONTPROBE_1284 opt_ppb_1284.h
593 # smbus related options
594 ENABLE_ALART opt_intpm.h
596 # These cause changes all over the kernel
597 BLKDEV_IOSIZE opt_global.h
598 BURN_BRIDGES opt_global.h
600 DEBUG_LOCKS opt_global.h
601 DEBUG_VFS_LOCKS opt_global.h
602 DFLTPHYS opt_global.h
603 DIAGNOSTIC opt_global.h
604 INVARIANT_SUPPORT opt_global.h
605 INVARIANTS opt_global.h
606 KASSERT_PANIC_OPTIONAL opt_global.h
608 MAXMEMDOM opt_global.h
610 MCLSHIFT opt_global.h
611 MUTEX_NOINLINE opt_global.h
612 LOCK_PROFILING opt_global.h
613 LOCK_PROFILING_FAST opt_global.h
615 REGRESSION opt_global.h
616 RWLOCK_NOINLINE opt_global.h
617 SX_NOINLINE opt_global.h
618 VFS_BIO_DEBUG opt_global.h
620 # These are VM related options
621 VM_KMEM_SIZE opt_vm.h
622 VM_KMEM_SIZE_SCALE opt_vm.h
623 VM_KMEM_SIZE_MAX opt_vm.h
624 VM_NRESERVLEVEL opt_vm.h
625 VM_LEVEL_0_ORDER opt_vm.h
627 MALLOC_MAKE_FAILURES opt_vm.h
628 MALLOC_PROFILE opt_vm.h
629 MALLOC_DEBUG_MAXZONES opt_vm.h
631 # The MemGuard replacement allocator used for tamper-after-free detection
632 DEBUG_MEMGUARD opt_vm.h
634 # The RedZone malloc(9) protection
635 DEBUG_REDZONE opt_vm.h
637 # Standard SMP options
638 EARLY_AP_STARTUP opt_global.h
642 # Size of the kernel message buffer
643 MSGBUF_SIZE opt_msgbuf.h
646 NFS_MINATTRTIMO opt_nfs.h
647 NFS_MAXATTRTIMO opt_nfs.h
648 NFS_MINDIRATTRTIMO opt_nfs.h
649 NFS_MAXDIRATTRTIMO opt_nfs.h
652 # For the Bt848/Bt848A/Bt849/Bt878/Bt879 driver
653 OVERRIDE_CARD opt_bktr.h
654 OVERRIDE_TUNER opt_bktr.h
655 OVERRIDE_DBX opt_bktr.h
656 OVERRIDE_MSP opt_bktr.h
657 BROOKTREE_SYSTEM_DEFAULT opt_bktr.h
658 BROOKTREE_ALLOC_PAGES opt_bktr.h
659 BKTR_OVERRIDE_CARD opt_bktr.h
660 BKTR_OVERRIDE_TUNER opt_bktr.h
661 BKTR_OVERRIDE_DBX opt_bktr.h
662 BKTR_OVERRIDE_MSP opt_bktr.h
663 BKTR_SYSTEM_DEFAULT opt_bktr.h
664 BKTR_ALLOC_PAGES opt_bktr.h
665 BKTR_USE_PLL opt_bktr.h
666 BKTR_GPIO_ACCESS opt_bktr.h
667 BKTR_NO_MSP_RESET opt_bktr.h
668 BKTR_430_FX_MODE opt_bktr.h
669 BKTR_SIS_VIA_MODE opt_bktr.h
670 BKTR_USE_FREEBSD_SMBUS opt_bktr.h
671 BKTR_NEW_MSP34XX_DRIVER opt_bktr.h
673 # Options for uart(4)
674 UART_PPS_ON_CTS opt_uart.h
675 UART_POLL_FREQ opt_uart.h
676 UART_DEV_TOLERANCE_PCT opt_uart.h
678 # options for bus/device framework
681 # options for USB support
683 USB_HOST_ALIGN opt_usb.h
684 USB_REQ_DEBUG opt_usb.h
685 USB_TEMPLATE opt_usb.h
686 USB_VERBOSE opt_usb.h
687 USB_DMA_SINGLE_ALLOC opt_usb.h
688 USB_EHCI_BIG_ENDIAN_DESC opt_usb.h
690 UKBD_DFLT_KEYMAP opt_ukbd.h
691 UPLCOM_INTR_INTERVAL opt_uplcom.h
692 UVSCOM_DEFAULT_OPKTSIZE opt_uvscom.h
693 UVSCOM_INTR_INTERVAL opt_uvscom.h
695 # options for the Realtek rtwn driver
696 RTWN_DEBUG opt_rtwn.h
697 RTWN_WITHOUT_UCODE opt_rtwn.h
699 # Embedded system options
705 PCFCLOCK_VERBOSE opt_pcfclock.h
706 PCFCLOCK_MAX_RETRIES opt_pcfclock.h
711 KTR_CPUMASK opt_ktr.h
712 KTR_COMPILE opt_global.h
713 KTR_BOOT_ENTRIES opt_global.h
714 KTR_ENTRIES opt_global.h
715 KTR_VERBOSE opt_ktr.h
717 WITNESS_KDB opt_witness.h
718 WITNESS_NO_VNODE opt_witness.h
719 WITNESS_SKIPSPIN opt_witness.h
720 WITNESS_COUNT opt_witness.h
721 OPENSOLARIS_WITNESS opt_global.h
723 # options for ACPI support
724 ACPI_DEBUG opt_acpi.h
725 ACPI_MAX_TASKS opt_acpi.h
726 ACPI_MAX_THREADS opt_acpi.h
734 # various 'device presence' options.
737 DEV_NETMAP opt_global.h
742 DEV_RANDOM opt_global.h
743 DEV_SPLASH opt_splash.h
753 BCE_NVRAM_WRITE_SUPPORT opt_bce.h
755 SOCKBUF_DEBUG opt_global.h
758 # options for ubsec driver
759 UBSEC_DEBUG opt_ubsec.h
760 UBSEC_RNDTEST opt_ubsec.h
761 UBSEC_NO_RNG opt_ubsec.h
763 # options for hifn driver
764 HIFN_DEBUG opt_hifn.h
765 HIFN_RNDTEST opt_hifn.h
767 # options for safenet driver
768 SAFE_DEBUG opt_safe.h
769 SAFE_NO_RNG opt_safe.h
770 SAFE_RNDTEST opt_safe.h
773 MAXCONS opt_syscons.h
774 SC_ALT_MOUSE_IMAGE opt_syscons.h
775 SC_CUT_SPACES2TABS opt_syscons.h
776 SC_CUT_SEPCHARS opt_syscons.h
777 SC_DEBUG_LEVEL opt_syscons.h
778 SC_DFLT_FONT opt_syscons.h
779 SC_DISABLE_KDBKEY opt_syscons.h
780 SC_DISABLE_REBOOT opt_syscons.h
781 SC_HISTORY_SIZE opt_syscons.h
782 SC_KERNEL_CONS_ATTR opt_syscons.h
783 SC_KERNEL_CONS_ATTRS opt_syscons.h
784 SC_KERNEL_CONS_REV_ATTR opt_syscons.h
785 SC_MOUSE_CHAR opt_syscons.h
786 SC_NO_CUTPASTE opt_syscons.h
787 SC_NO_FONT_LOADING opt_syscons.h
788 SC_NO_HISTORY opt_syscons.h
789 SC_NO_MODE_CHANGE opt_syscons.h
790 SC_NO_SUSPEND_VTYSWITCH opt_syscons.h
791 SC_NO_SYSMOUSE opt_syscons.h
792 SC_NORM_ATTR opt_syscons.h
793 SC_NORM_REV_ATTR opt_syscons.h
794 SC_PIXEL_MODE opt_syscons.h
795 SC_RENDER_DEBUG opt_syscons.h
796 SC_TWOBUTTON_MOUSE opt_syscons.h
797 VT_ALT_TO_ESC_HACK opt_syscons.h
798 VT_FB_DEFAULT_WIDTH opt_syscons.h
799 VT_FB_DEFAULT_HEIGHT opt_syscons.h
800 VT_MAXWINDOWS opt_syscons.h
801 VT_TWOBUTTON_MOUSE opt_syscons.h
805 # teken terminal emulator options
806 TEKEN_CONS25 opt_teken.h
807 TEKEN_UTF8 opt_teken.h
808 TERMINAL_KERN_ATTR opt_teken.h
809 TERMINAL_NORM_ATTR opt_teken.h
812 PRINTF_BUFR_SIZE opt_printf.h
813 BOOT_TAG opt_printf.h
814 BOOT_TAG_SZ opt_printf.h
817 KBD_DISABLE_KEYMAP_LOAD opt_kbd.h
818 KBD_INSTALL_CDEV opt_kbd.h
819 KBD_MAXRETRY opt_kbd.h
820 KBD_MAXWAIT opt_kbd.h
821 KBD_RESETDELAY opt_kbd.h
822 KBDIO_DEBUG opt_kbd.h
824 KBDMUX_DFLT_KEYMAP opt_kbdmux.h
826 # options for the Atheros driver
830 ATH_DIAGAPI opt_ath.h
831 ATH_TX99_DIAG opt_ath.h
832 ATH_ENABLE_11N opt_ath.h
833 ATH_ENABLE_DFS opt_ath.h
834 ATH_EEPROM_FIRMWARE opt_ath.h
835 ATH_ENABLE_RADIOTAP_VENDOR_EXT opt_ath.h
836 ATH_DEBUG_ALQ opt_ath.h
837 ATH_KTR_INTR_DEBUG opt_ath.h
839 # options for the Atheros hal
840 AH_SUPPORT_AR5416 opt_ah.h
841 # XXX For now, this breaks non-AR9130 chipsets, so only use it
842 # XXX when actually targeting AR9130.
843 AH_SUPPORT_AR9130 opt_ah.h
845 # This is required for AR933x SoC support
846 AH_SUPPORT_AR9330 opt_ah.h
847 AH_SUPPORT_AR9340 opt_ah.h
848 AH_SUPPORT_QCA9530 opt_ah.h
849 AH_SUPPORT_QCA9550 opt_ah.h
853 AH_DEBUG_ALQ opt_ah.h
854 AH_REGOPS_FUNC opt_ah.h
855 AH_WRITE_REGDOMAIN opt_ah.h
856 AH_DEBUG_COUNTRY opt_ah.h
857 AH_WRITE_EEPROM opt_ah.h
858 AH_PRIVATE_DIAG opt_ah.h
859 AH_NEED_DESC_SWAP opt_ah.h
860 AH_USE_INIPDGAIN opt_ah.h
862 AH_RXCFG_SDMAMW_4BYTES opt_ah.h
863 AH_INTERRUPT_DEBUGGING opt_ah.h
864 # AR5416 and later interrupt mitigation
865 # XXX do not use this for AR9130
866 AH_AR5416_INTERRUPT_MITIGATION opt_ah.h
868 # options for the Broadcom BCM43xx driver (bwi)
870 BWI_DEBUG_VERBOSE opt_bwi.h
872 # options for the Brodacom BCM43xx driver (bwn)
874 BWN_GPL_PHY opt_bwn.h
875 BWN_USE_SIBA opt_bwn.h
877 # Options for the SIBA driver
878 SIBA_DEBUG opt_siba.h
880 # options for the Marvell 8335 wireless driver
881 MALO_DEBUG opt_malo.h
882 MALO_TXBUF opt_malo.h
883 MALO_RXBUF opt_malo.h
885 # options for the Marvell wireless driver
889 MWL_DIAGAPI opt_mwl.h
890 MWL_AGGR_SIZE opt_mwl.h
891 MWL_TX_NODROP opt_mwl.h
893 # Options for the Marvell NETA driver
894 MVNETA_MULTIQUEUE opt_mvneta.h
895 MVNETA_KTR opt_mvneta.h
897 # Options for the Intel 802.11ac wireless driver
900 # Options for the Intel 802.11n wireless driver
903 # Options for the Intel 3945ABG wireless driver
907 DCONS_BUF_SIZE opt_dcons.h
908 DCONS_POLL_HZ opt_dcons.h
909 DCONS_FORCE_CONSOLE opt_dcons.h
910 DCONS_FORCE_GDB opt_dcons.h
913 HWPMC_DEBUG opt_global.h
915 HWPMC_MIPS_BACKTRACE opt_hwpmc_hooks.h
917 # 802.11 support layer
918 IEEE80211_DEBUG opt_wlan.h
919 IEEE80211_DEBUG_REFCNT opt_wlan.h
920 IEEE80211_AMPDU_AGE opt_wlan.h
921 IEEE80211_SUPPORT_MESH opt_wlan.h
922 IEEE80211_SUPPORT_SUPERG opt_wlan.h
923 IEEE80211_SUPPORT_TDMA opt_wlan.h
924 IEEE80211_ALQ opt_wlan.h
925 IEEE80211_DFS_DEBUG opt_wlan.h
927 # 802.11 TDMA support
928 TDMA_SLOTLEN_DEFAULT opt_tdma.h
929 TDMA_SLOTCNT_DEFAULT opt_tdma.h
930 TDMA_BINTVAL_DEFAULT opt_tdma.h
931 TDMA_TXRATE_11B_DEFAULT opt_tdma.h
932 TDMA_TXRATE_11G_DEFAULT opt_tdma.h
933 TDMA_TXRATE_11A_DEFAULT opt_tdma.h
934 TDMA_TXRATE_TURBO_DEFAULT opt_tdma.h
935 TDMA_TXRATE_HALF_DEFAULT opt_tdma.h
936 TDMA_TXRATE_QUARTER_DEFAULT opt_tdma.h
937 TDMA_TXRATE_11NA_DEFAULT opt_tdma.h
938 TDMA_TXRATE_11NG_DEFAULT opt_tdma.h
941 PICKMODE_DEBUG opt_videomode.h
943 # Network stack virtualization options
945 VNET_DEBUG opt_global.h
947 # Common Flash Interface (CFI) options
948 CFI_SUPPORT_STRATAFLASH opt_cfi.h
949 CFI_ARMEDANDDANGEROUS opt_cfi.h
950 CFI_HARDWAREBYTESWAP opt_cfi.h
954 SND_DIAGNOSTIC opt_snd.h
955 SND_FEEDER_MULTIFORMAT opt_snd.h
956 SND_FEEDER_FULL_MULTIFORMAT opt_snd.h
957 SND_FEEDER_RATE_HP opt_snd.h
959 SND_OLDSTEREO opt_snd.h
963 # Flattened device tree options
965 FDT_DTB_STATIC opt_platform.h
967 # OFED Infiniband stack
969 OFED_DEBUG_INIT opt_ofed.h
973 IPOIB_DEBUG opt_ofed.h
976 # Resource Accounting
978 RACCT_DEFAULT_TO_DISABLED opt_global.h
983 # Random number generator(s)
984 # With this, no entropy processor is loaded, but the entropy
985 # harvesting infrastructure is present. This means an entropy
986 # processor may be loaded as a module.
987 RANDOM_LOADABLE opt_global.h
988 # This turns on high-rate and potentially expensive harvesting in
989 # the uma slab allocator.
990 RANDOM_ENABLE_UMA opt_global.h
991 RANDOM_ENABLE_ETHER opt_global.h
994 BHND_LOGLEVEL opt_global.h
996 # GPIO and child devices
997 GPIO_SPI_DEBUG opt_gpio.h
1000 SPIGEN_LEGACY_CDEVNAME opt_spi.h
1002 # etherswitch(4) driver
1003 RTL8366_SOFT_RESET opt_etherswitch.h
1005 # evdev protocol support
1006 EVDEV_SUPPORT opt_evdev.h
1007 EVDEV_DEBUG opt_evdev.h
1008 UINPUT_DEBUG opt_evdev.h
1010 # Hyper-V network driver
1013 # CAM-based MMC stack
1015 # Encrypted kernel crash dumps
1019 NVME_USE_NVD opt_nvme.h
1022 AMDSBWD_DEBUG opt_amdsbwd.h