]> CyberLeo.Net >> Repos - FreeBSD/FreeBSD.git/blob - sys/dev/aic7xxx/ahc_isa.c
ahc(4) clean up old Linux defines
[FreeBSD/FreeBSD.git] / sys / dev / aic7xxx / ahc_isa.c
1 /*-
2  * FreeBSD, VLB/ISA product support functions
3  *
4  * SPDX-License-Identifier: BSD-3-Clause
5  *
6  * Copyright (c) 2004 Justin T. Gibbs.
7  * All rights reserved.
8  *
9  * Redistribution and use in source and binary forms, with or without
10  * modification, are permitted provided that the following conditions
11  * are met:
12  * 1. Redistributions of source code must retain the above copyright
13  *    notice, this list of conditions, and the following disclaimer,
14  *    without modification.
15  * 2. Redistributions in binary form must reproduce at minimum a disclaimer
16  *    substantially similar to the "NO WARRANTY" disclaimer below
17  *    ("Disclaimer") and any redistribution must be conditioned upon
18  *    including a substantially similar Disclaimer requirement for further
19  *    binary redistribution.
20  * 3. Neither the names of the above-listed copyright holders nor the names
21  *    of any contributors may be used to endorse or promote products derived
22  *    from this software without specific prior written permission.
23  *
24  * NO WARRANTY
25  * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
26  * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
27  * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
28  * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
29  * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
30  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
31  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
32  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
33  * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
34  * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
35  * POSSIBILITY OF SUCH DAMAGES.
36  *
37  * $Id$
38  */
39
40 #include <dev/aic7xxx/aic7xxx_osm.h>
41
42 #include <sys/limits.h>         /* For CHAR_BIT*/
43 #include <isa/isavar.h>         /* For ISA attach glue */
44
45 static struct aic7770_identity *ahc_isa_find_device(bus_space_tag_t tag,
46                                                     bus_space_handle_t bsh);
47 static void                     ahc_isa_identify(driver_t *driver,
48                                                  device_t parent);
49 static int                      ahc_isa_probe(device_t dev);
50 static int                      ahc_isa_attach(device_t dev);
51
52 /*
53  * Perform an EISA probe of the address with the addition
54  * of a "priming" step.  The 284X requires priming (a write
55  * to offset 0x80, the first EISA ID register) to ensure it
56  * is not mistaken as an EISA card.  Once we have the ID,
57  * lookup the controller in the aic7770 table of supported
58  * devices.
59  */
60 static struct aic7770_identity *
61 ahc_isa_find_device(bus_space_tag_t tag, bus_space_handle_t bsh) {
62         uint32_t  id;
63         u_int     id_size;
64         int       i;
65
66         id = 0;
67         id_size = sizeof(id);
68         for (i = 0; i < id_size; i++) {
69                 bus_space_write_1(tag, bsh, 0x80, 0x80 + i);
70                 id |= bus_space_read_1(tag, bsh, 0x80 + i)
71                    << ((id_size - i - 1) * CHAR_BIT);
72         }
73                            
74         return (aic7770_find_device(id));
75 }
76
77 static void
78 ahc_isa_identify(driver_t *driver, device_t parent)
79 {
80         int slot;
81         int max_slot;
82
83         max_slot = 14;
84         for (slot = 0; slot <= max_slot; slot++) {
85                 struct aic7770_identity *entry;
86                 bus_space_tag_t     tag;
87                 bus_space_handle_t  bsh;
88                 struct resource    *regs;
89                 uint32_t            iobase;
90                 int                 rid;
91
92                 rid = 0;
93                 iobase = (slot * AHC_EISA_SLOT_SIZE) + AHC_EISA_SLOT_OFFSET;
94                 regs = bus_alloc_resource(parent, SYS_RES_IOPORT, &rid,
95                                           iobase, iobase, AHC_EISA_IOSIZE,
96                                           RF_ACTIVE);
97                 if (regs == NULL) {
98                         if (bootverbose)
99                                 printf("ahc_isa_identify %d: ioport 0x%x "
100                                        "alloc failed\n", slot, iobase);
101                         continue;
102                 }
103
104                 tag = rman_get_bustag(regs);
105                 bsh = rman_get_bushandle(regs);
106
107                 entry = ahc_isa_find_device(tag, bsh);
108                 if (entry != NULL) {
109                         device_t child;
110
111                         child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE,
112                                               "ahc", -1);
113                         if (child != NULL) {
114                                 device_set_driver(child, driver);
115                                 bus_set_resource(child, SYS_RES_IOPORT,
116                                                  0, iobase, AHC_EISA_IOSIZE);
117                         }
118                 }
119                 bus_release_resource(parent, SYS_RES_IOPORT, rid, regs);
120         }
121 }
122
123 static int
124 ahc_isa_probe(device_t dev)
125 {
126         struct    aic7770_identity *entry;
127         bus_space_tag_t     tag;
128         bus_space_handle_t  bsh;
129         struct    resource *regs;
130         struct    resource *irq;
131         uint32_t  iobase;
132         u_int     intdef;
133         u_int     hcntrl;
134         int       irq_num;
135         int       error;
136         int       zero;
137
138         error = ENXIO;
139         zero = 0;
140         regs = NULL;
141         irq = NULL;
142
143         /* Skip probes for ISA PnP devices */
144         if (isa_get_logicalid(dev) != 0)
145                 return (error);
146
147         regs = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &zero, RF_ACTIVE);
148         if (regs == NULL) {
149                 device_printf(dev, "No resources allocated.\n");
150                 return (ENOMEM);
151         }
152
153         iobase = rman_get_start(regs);
154         tag = rman_get_bustag(regs);
155         bsh = rman_get_bushandle(regs);
156
157         entry = ahc_isa_find_device(tag, bsh);
158         if (entry == NULL)
159                 goto cleanup;
160
161         /* Pause the card preseving the IRQ type */
162         hcntrl = bus_space_read_1(tag, bsh, HCNTRL) & IRQMS;
163         bus_space_write_1(tag, bsh, HCNTRL, hcntrl | PAUSE);
164         while ((bus_space_read_1(tag, bsh, HCNTRL) & PAUSE) == 0)
165                 ;
166
167         /* Make sure we have a valid interrupt vector */
168         intdef = bus_space_read_1(tag, bsh, INTDEF);
169         irq_num = intdef & VECTOR;
170         switch (irq_num) {
171         case 9: 
172         case 10:
173         case 11:
174         case 12:
175         case 14:
176         case 15:
177                 break;
178         default:
179                 device_printf(dev, "@0x%x: illegal irq setting %d\n",
180                               iobase, irq_num);
181                 goto cleanup;
182         }
183
184         if (bus_set_resource(dev, SYS_RES_IRQ, zero, irq_num, 1) != 0)
185                 goto cleanup;
186
187         /*
188          * The 284X only supports edge triggered interrupts,
189          * so do not claim RF_SHAREABLE.
190          */
191         irq = bus_alloc_resource_any(dev, SYS_RES_IRQ, &zero,
192                                      0 /*!(RF_ACTIVE|RF_SHAREABLE)*/);
193         if (irq != NULL) {
194                 error = 0;
195                 device_set_desc(dev, entry->name);
196         } else 
197                 device_printf(dev, "@0x%x: irq %d allocation failed\n",
198                               iobase, irq_num);
199
200 cleanup:
201         if (regs != NULL) {
202                 bus_release_resource(dev, SYS_RES_IOPORT, zero, regs);
203                 regs = NULL;
204         }
205
206         if (irq != NULL) {
207                 bus_release_resource(dev, SYS_RES_IRQ, zero, irq);
208                 irq = NULL;
209         }
210
211         return (error);
212 }
213
214 static int
215 ahc_isa_attach(device_t dev)
216 {
217         struct   aic7770_identity *entry;
218         bus_space_tag_t     tag;
219         bus_space_handle_t  bsh;
220         struct    resource *regs;
221         struct    ahc_softc *ahc;
222         char     *name;
223         int       zero;
224         int       error;
225
226         zero = 0;
227         regs = bus_alloc_resource_any(dev, SYS_RES_IOPORT, &zero, RF_ACTIVE);
228         if (regs == NULL)
229                 return (ENOMEM);
230
231         tag = rman_get_bustag(regs);
232         bsh = rman_get_bushandle(regs);
233         entry = ahc_isa_find_device(tag, bsh);
234         bus_release_resource(dev, SYS_RES_IOPORT, zero, regs);
235         if (entry == NULL)
236                 return (ENODEV);
237
238         /*
239          * Allocate a softc for this card and
240          * set it up for attachment by our
241          * common detect routine.
242          */
243         name = malloc(strlen(device_get_nameunit(dev)) + 1, M_DEVBUF, M_NOWAIT);
244         if (name == NULL)
245                 return (ENOMEM);
246         strcpy(name, device_get_nameunit(dev));
247         ahc = ahc_alloc(dev, name);
248         if (ahc == NULL)
249                 return (ENOMEM);
250
251         ahc_set_unit(ahc, device_get_unit(dev));
252
253         /* Allocate a dmatag for our SCB DMA maps */
254         error = aic_dma_tag_create(ahc, /*parent*/bus_get_dma_tag(dev),
255                                    /*alignment*/1, /*boundary*/0,
256                                    /*lowaddr*/BUS_SPACE_MAXADDR_32BIT,
257                                    /*highaddr*/BUS_SPACE_MAXADDR,
258                                    /*filter*/NULL, /*filterarg*/NULL,
259                                    /*maxsize*/BUS_SPACE_MAXSIZE_32BIT,
260                                    /*nsegments*/AHC_NSEG,
261                                    /*maxsegsz*/AHC_MAXTRANSFER_SIZE,
262                                    /*flags*/0,
263                                    &ahc->parent_dmat);
264
265         if (error != 0) {
266                 printf("ahc_isa_attach: Could not allocate DMA tag "
267                        "- error %d\n", error);
268                 ahc_free(ahc);
269                 return (ENOMEM);
270         }
271         ahc->dev_softc = dev;
272         error = aic7770_config(ahc, entry, /*unused ioport arg*/0);
273         if (error != 0) {
274                 ahc_free(ahc);
275                 return (error);
276         }
277
278         ahc_attach(ahc);
279         return (0);
280 }
281
282 static device_method_t ahc_isa_device_methods[] = {
283         /* Device interface */
284         DEVMETHOD(device_identify,      ahc_isa_identify),
285         DEVMETHOD(device_probe,         ahc_isa_probe),
286         DEVMETHOD(device_attach,        ahc_isa_attach),
287         DEVMETHOD(device_detach,        ahc_detach),
288         { 0, 0 }
289 };
290
291 static driver_t ahc_isa_driver = {
292         "ahc",
293         ahc_isa_device_methods,
294         sizeof(struct ahc_softc)
295 };
296
297 DRIVER_MODULE(ahc_isa, isa, ahc_isa_driver, 0, 0);
298 MODULE_DEPEND(ahc_isa, ahc, 1, 1, 1);
299 MODULE_VERSION(ahc_isa, 1);