sys/gnu/dts/arm/rtd1195.dtsi

   1 // SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-2-Clause)
   2 /*
   3  * Copyright (c) 2017-2019 Andreas Färber
   4  */
   5
   6 /memreserve/ 0x00000000 0x0000a800; /* boot code */
   7 /memreserve/ 0x0000a800 0x000f5800;
   8 /memreserve/ 0x17fff000 0x00001000;
   9
  10 #include <dt-bindings/interrupt-controller/arm-gic.h>
  11 #include <dt-bindings/reset/realtek,rtd1195.h>
  12
  13 / {
  14         compatible = "realtek,rtd1195";
  15         interrupt-parent = <&gic>;
  16         #address-cells = <1>;
  17         #size-cells = <1>;
  18
  19         cpus {
  20                 #address-cells = <1>;
  21                 #size-cells = <0>;
  22
  23                 cpu0: cpu@0 {
  24                         device_type = "cpu";
  25                         compatible = "arm,cortex-a7";
  26                         reg = <0x0>;
  27                         clock-frequency = <1000000000>;
  28                 };
  29
  30                 cpu1: cpu@1 {
  31                         device_type = "cpu";
  32                         compatible = "arm,cortex-a7";
  33                         reg = <0x1>;
  34                         clock-frequency = <1000000000>;
  35                 };
  36         };
  37
  38         reserved-memory {
  39                 #address-cells = <1>;
  40                 #size-cells = <1>;
  41                 ranges;
  42
  43                 rpc_comm: rpc@b000 {
  44                         reg = <0x0000b000 0x1000>;
  45                 };
  46
  47                 audio@1b00000 {
  48                         reg = <0x01b00000 0x400000>;
  49                 };
  50
  51                 rpc_ringbuf: rpc@1ffe000 {
  52                         reg = <0x01ffe000 0x4000>;
  53                 };
  54
  55                 secure@10000000 {
  56                         reg = <0x10000000 0x100000>;
  57                         no-map;
  58                 };
  59         };
  60
  61         arm-pmu {
  62                 compatible = "arm,cortex-a7-pmu";
  63                 interrupts = <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
  64                              <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
  65                 interrupt-affinity = <&cpu0>, <&cpu1>;
  66         };
  67
  68         timer {
  69                 compatible = "arm,armv7-timer";
  70                 interrupts = <GIC_PPI 13
  71                         (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  72                              <GIC_PPI 14
  73                         (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  74                              <GIC_PPI 11
  75                         (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
  76                              <GIC_PPI 10
  77                         (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
  78                 clock-frequency = <27000000>;
  79         };
  80
  81         osc27M: osc {
  82                 compatible = "fixed-clock";
  83                 clock-frequency = <27000000>;
  84                 #clock-cells = <0>;
  85                 clock-output-names = "osc27M";
  86         };
  87
  88         soc {
  89                 compatible = "simple-bus";
  90                 #address-cells = <1>;
  91                 #size-cells = <1>;
  92                 ranges = <0x00000000 0x00000000 0x0000a800>,
  93                          <0x18000000 0x18000000 0x00070000>,
  94                          <0x18100000 0x18100000 0x01000000>,
  95                          <0x80000000 0x80000000 0x80000000>;
  96
  97                 rbus: bus@18000000 {
  98                         compatible = "simple-bus";
  99                         reg = <0x18000000 0x70000>;
 100                         #address-cells = <1>;
 101                         #size-cells = <1>;
 102                         ranges = <0x0 0x18000000 0x70000>;
 103
 104                         crt: syscon@0 {
 105                                 compatible = "syscon", "simple-mfd";
 106                                 reg = <0x0 0x1000>;
 107                                 reg-io-width = <4>;
 108                                 #address-cells = <1>;
 109                                 #size-cells = <1>;
 110                                 ranges = <0x0 0x0 0x1000>;
 111                         };
 112
 113                         iso: syscon@7000 {
 114                                 compatible = "syscon", "simple-mfd";
 115                                 reg = <0x7000 0x1000>;
 116                                 reg-io-width = <4>;
 117                                 #address-cells = <1>;
 118                                 #size-cells = <1>;
 119                                 ranges = <0x0 0x7000 0x1000>;
 120                         };
 121
 122                         sb2: syscon@1a000 {
 123                                 compatible = "syscon", "simple-mfd";
 124                                 reg = <0x1a000 0x1000>;
 125                                 reg-io-width = <4>;
 126                                 #address-cells = <1>;
 127                                 #size-cells = <1>;
 128                                 ranges = <0x0 0x1a000 0x1000>;
 129                         };
 130
 131                         misc: syscon@1b000 {
 132                                 compatible = "syscon", "simple-mfd";
 133                                 reg = <0x1b000 0x1000>;
 134                                 reg-io-width = <4>;
 135                                 #address-cells = <1>;
 136                                 #size-cells = <1>;
 137                                 ranges = <0x0 0x1b000 0x1000>;
 138                         };
 139
 140                         scpu_wrapper: syscon@1d000 {
 141                                 compatible = "syscon", "simple-mfd";
 142                                 reg = <0x1d000 0x1000>;
 143                                 reg-io-width = <4>;
 144                                 #address-cells = <1>;
 145                                 #size-cells = <1>;
 146                                 ranges = <0x0 0x1d000 0x1000>;
 147                         };
 148                 };
 149
 150                 gic: interrupt-controller@ff011000 {
 151                         compatible = "arm,cortex-a7-gic";
 152                         reg = <0xff011000 0x1000>,
 153                               <0xff012000 0x2000>,
 154                               <0xff014000 0x2000>,
 155                               <0xff016000 0x2000>;
 156                         interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
 157                         interrupt-controller;
 158                         #interrupt-cells = <3>;
 159                 };
 160         };
 161 };
 162
 163 &crt {
 164         reset1: reset-controller@0 {
 165                 compatible = "snps,dw-low-reset";
 166                 reg = <0x0 0x4>;
 167                 #reset-cells = <1>;
 168         };
 169
 170         reset2: reset-controller@4 {
 171                 compatible = "snps,dw-low-reset";
 172                 reg = <0x4 0x4>;
 173                 #reset-cells = <1>;
 174         };
 175
 176         reset3: reset-controller@8 {
 177                 compatible = "snps,dw-low-reset";
 178                 reg = <0x8 0x4>;
 179                 #reset-cells = <1>;
 180         };
 181 };
 182
 183 &iso {
 184         iso_reset: reset-controller@88 {
 185                 compatible = "snps,dw-low-reset";
 186                 reg = <0x88 0x4>;
 187                 #reset-cells = <1>;
 188         };
 189
 190         wdt: watchdog@680 {
 191                 compatible = "realtek,rtd1295-watchdog";
 192                 reg = <0x680 0x100>;
 193                 clocks = <&osc27M>;
 194         };
 195
 196         uart0: serial@800 {
 197                 compatible = "snps,dw-apb-uart";
 198                 reg = <0x800 0x400>;
 199                 reg-shift = <2>;
 200                 reg-io-width = <4>;
 201                 resets = <&iso_reset RTD1195_ISO_RSTN_UR0>;
 202                 clock-frequency = <27000000>;
 203                 status = "disabled";
 204         };
 205 };
 206
 207 &misc {
 208         uart1: serial@200 {
 209                 compatible = "snps,dw-apb-uart";
 210                 reg = <0x200 0x100>;
 211                 reg-shift = <2>;
 212                 reg-io-width = <4>;
 213                 resets = <&reset2 RTD1195_RSTN_UR1>;
 214                 clock-frequency = <27000000>;
 215                 status = "disabled";
 216         };
 217 };