contrib/openpam/bin/Makefile.in

   1 # Makefile.in generated by automake 1.14 from Makefile.am.
   2 # @configure_input@
   3
   4 # Copyright (C) 1994-2013 Free Software Foundation, Inc.
   5
   6 # This Makefile.in is free software; the Free Software Foundation
   7 # gives unlimited permission to copy and/or distribute it,
   8 # with or without modifications, as long as this notice is preserved.
   9
  10 # This program is distributed in the hope that it will be useful,
  11 # but WITHOUT ANY WARRANTY, to the extent permitted by law; without
  12 # even the implied warranty of MERCHANTABILITY or FITNESS FOR A
  13 # PARTICULAR PURPOSE.
  14
  15 @SET_MAKE@
  16
  17 # $Id: Makefile.am 648 2013-03-05 17:54:27Z des $
  18 VPATH = @srcdir@
  19 am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
  20 am__make_running_with_option = \
  21   case $${target_option-} in \
  22       ?) ;; \
  23       *) echo "am__make_running_with_option: internal error: invalid" \
  24               "target option '$${target_option-}' specified" >&2; \
  25          exit 1;; \
  26   esac; \
  27   has_opt=no; \
  28   sane_makeflags=$$MAKEFLAGS; \
  29   if $(am__is_gnu_make); then \
  30     sane_makeflags=$$MFLAGS; \
  31   else \
  32     case $$MAKEFLAGS in \
  33       *\\[\ \   ]*) \
  34         bs=\\; \
  35         sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
  36           | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
  37     esac; \
  38   fi; \
  39   skip_next=no; \
  40   strip_trailopt () \
  41   { \
  42     flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
  43   }; \
  44   for flg in $$sane_makeflags; do \
  45     test $$skip_next = yes && { skip_next=no; continue; }; \
  46     case $$flg in \
  47       *=*|--*) continue;; \
  48         -*I) strip_trailopt 'I'; skip_next=yes;; \
  49       -*I?*) strip_trailopt 'I';; \
  50         -*O) strip_trailopt 'O'; skip_next=yes;; \
  51       -*O?*) strip_trailopt 'O';; \
  52         -*l) strip_trailopt 'l'; skip_next=yes;; \
  53       -*l?*) strip_trailopt 'l';; \
  54       -[dEDm]) skip_next=yes;; \
  55       -[JT]) skip_next=yes;; \
  56     esac; \
  57     case $$flg in \
  58       *$$target_option*) has_opt=yes; break;; \
  59     esac; \
  60   done; \
  61   test $$has_opt = yes
  62 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
  63 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
  64 pkgdatadir = $(datadir)/@PACKAGE@
  65 pkgincludedir = $(includedir)/@PACKAGE@
  66 pkglibdir = $(libdir)/@PACKAGE@
  67 pkglibexecdir = $(libexecdir)/@PACKAGE@
  68 am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
  69 install_sh_DATA = $(install_sh) -c -m 644
  70 install_sh_PROGRAM = $(install_sh) -c
  71 install_sh_SCRIPT = $(install_sh) -c
  72 INSTALL_HEADER = $(INSTALL_DATA)
  73 transform = $(program_transform_name)
  74 NORMAL_INSTALL = :
  75 PRE_INSTALL = :
  76 POST_INSTALL = :
  77 NORMAL_UNINSTALL = :
  78 PRE_UNINSTALL = :
  79 POST_UNINSTALL = :
  80 build_triplet = @build@
  81 host_triplet = @host@
  82 @WITH_PAMTEST_TRUE@am__append_1 = pamtest
  83 @WITH_SU_TRUE@am__append_2 = su
  84 subdir = bin
  85 DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
  86 ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
  87 am__aclocal_m4_deps = $(top_srcdir)/m4/libtool.m4 \
  88         $(top_srcdir)/m4/ltoptions.m4 $(top_srcdir)/m4/ltsugar.m4 \
  89         $(top_srcdir)/m4/ltversion.m4 $(top_srcdir)/m4/lt~obsolete.m4 \
  90         $(top_srcdir)/configure.ac
  91 am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
  92         $(ACLOCAL_M4)
  93 mkinstalldirs = $(install_sh) -d
  94 CONFIG_HEADER = $(top_builddir)/config.h
  95 CONFIG_CLEAN_FILES =
  96 CONFIG_CLEAN_VPATH_FILES =
  97 AM_V_P = $(am__v_P_@AM_V@)
  98 am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
  99 am__v_P_0 = false
 100 am__v_P_1 = :
 101 AM_V_GEN = $(am__v_GEN_@AM_V@)
 102 am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
 103 am__v_GEN_0 = @echo "  GEN     " $@;
 104 am__v_GEN_1 =
 105 AM_V_at = $(am__v_at_@AM_V@)
 106 am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
 107 am__v_at_0 = @
 108 am__v_at_1 =
 109 SOURCES =
 110 DIST_SOURCES =
 111 RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
 112         ctags-recursive dvi-recursive html-recursive info-recursive \
 113         install-data-recursive install-dvi-recursive \
 114         install-exec-recursive install-html-recursive \
 115         install-info-recursive install-pdf-recursive \
 116         install-ps-recursive install-recursive installcheck-recursive \
 117         installdirs-recursive pdf-recursive ps-recursive \
 118         tags-recursive uninstall-recursive
 119 am__can_run_installinfo = \
 120   case $$AM_UPDATE_INFO_DIR in \
 121     n|no|NO) false;; \
 122     *) (install-info --version) >/dev/null 2>&1;; \
 123   esac
 124 RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
 125   distclean-recursive maintainer-clean-recursive
 126 am__recursive_targets = \
 127   $(RECURSIVE_TARGETS) \
 128   $(RECURSIVE_CLEAN_TARGETS) \
 129   $(am__extra_recursive_targets)
 130 AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
 131         distdir
 132 am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
 133 # Read a list of newline-separated strings from the standard input,
 134 # and print each of them once, without duplicates.  Input order is
 135 # *not* preserved.
 136 am__uniquify_input = $(AWK) '\
 137   BEGIN { nonempty = 0; } \
 138   { items[$$0] = 1; nonempty = 1; } \
 139   END { if (nonempty) { for (i in items) print i; }; } \
 140 '
 141 # Make sure the list of sources is unique.  This is necessary because,
 142 # e.g., the same source file might be shared among _SOURCES variables
 143 # for different programs/libraries.
 144 am__define_uniq_tagged_files = \
 145   list='$(am__tagged_files)'; \
 146   unique=`for i in $$list; do \
 147     if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
 148   done | $(am__uniquify_input)`
 149 ETAGS = etags
 150 CTAGS = ctags
 151 DIST_SUBDIRS = openpam_dump_policy pamtest su
 152 DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
 153 am__relativize = \
 154   dir0=`pwd`; \
 155   sed_first='s,^\([^/]*\)/.*$$,\1,'; \
 156   sed_rest='s,^[^/]*/*,,'; \
 157   sed_last='s,^.*/\([^/]*\)$$,\1,'; \
 158   sed_butlast='s,/*[^/]*$$,,'; \
 159   while test -n "$$dir1"; do \
 160     first=`echo "$$dir1" | sed -e "$$sed_first"`; \
 161     if test "$$first" != "."; then \
 162       if test "$$first" = ".."; then \
 163         dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
 164         dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
 165       else \
 166         first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
 167         if test "$$first2" = "$$first"; then \
 168           dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
 169         else \
 170           dir2="../$$dir2"; \
 171         fi; \
 172         dir0="$$dir0"/"$$first"; \
 173       fi; \
 174     fi; \
 175     dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
 176   done; \
 177   reldir="$$dir2"
 178 ACLOCAL = @ACLOCAL@
 179 AMTAR = @AMTAR@
 180 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
 181 AR = @AR@
 182 AUTOCONF = @AUTOCONF@
 183 AUTOHEADER = @AUTOHEADER@
 184 AUTOMAKE = @AUTOMAKE@
 185 AWK = @AWK@
 186 CC = @CC@
 187 CCDEPMODE = @CCDEPMODE@
 188 CFLAGS = @CFLAGS@
 189 CPP = @CPP@
 190 CPPFLAGS = @CPPFLAGS@
 191 CRYPTO_LIBS = @CRYPTO_LIBS@
 192 CRYPT_LIBS = @CRYPT_LIBS@
 193 CYGPATH_W = @CYGPATH_W@
 194 DEFS = @DEFS@
 195 DEPDIR = @DEPDIR@
 196 DLLTOOL = @DLLTOOL@
 197 DL_LIBS = @DL_LIBS@
 198 DSYMUTIL = @DSYMUTIL@
 199 DUMPBIN = @DUMPBIN@
 200 ECHO_C = @ECHO_C@
 201 ECHO_N = @ECHO_N@
 202 ECHO_T = @ECHO_T@
 203 EGREP = @EGREP@
 204 EXEEXT = @EXEEXT@
 205 FGREP = @FGREP@
 206 GREP = @GREP@
 207 INSTALL = @INSTALL@
 208 INSTALL_DATA = @INSTALL_DATA@
 209 INSTALL_PROGRAM = @INSTALL_PROGRAM@
 210 INSTALL_SCRIPT = @INSTALL_SCRIPT@
 211 INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
 212 LD = @LD@
 213 LDFLAGS = @LDFLAGS@
 214 LIBOBJS = @LIBOBJS@
 215 LIBS = @LIBS@
 216 LIBTOOL = @LIBTOOL@
 217 LIB_MAJ = @LIB_MAJ@
 218 LIPO = @LIPO@
 219 LN_S = @LN_S@
 220 LTLIBOBJS = @LTLIBOBJS@
 221 MAKEINFO = @MAKEINFO@
 222 MANIFEST_TOOL = @MANIFEST_TOOL@
 223 MKDIR_P = @MKDIR_P@
 224 NM = @NM@
 225 NMEDIT = @NMEDIT@
 226 OBJDUMP = @OBJDUMP@
 227 OBJEXT = @OBJEXT@
 228 OPENPAM_MODULES_DIR = @OPENPAM_MODULES_DIR@
 229 OTOOL = @OTOOL@
 230 OTOOL64 = @OTOOL64@
 231 PACKAGE = @PACKAGE@
 232 PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
 233 PACKAGE_NAME = @PACKAGE_NAME@
 234 PACKAGE_STRING = @PACKAGE_STRING@
 235 PACKAGE_TARNAME = @PACKAGE_TARNAME@
 236 PACKAGE_URL = @PACKAGE_URL@
 237 PACKAGE_VERSION = @PACKAGE_VERSION@
 238 PATH_SEPARATOR = @PATH_SEPARATOR@
 239 RANLIB = @RANLIB@
 240 SED = @SED@
 241 SET_MAKE = @SET_MAKE@
 242 SHELL = @SHELL@
 243 STRIP = @STRIP@
 244 VERSION = @VERSION@
 245 abs_builddir = @abs_builddir@
 246 abs_srcdir = @abs_srcdir@
 247 abs_top_builddir = @abs_top_builddir@
 248 abs_top_srcdir = @abs_top_srcdir@
 249 ac_ct_AR = @ac_ct_AR@
 250 ac_ct_CC = @ac_ct_CC@
 251 ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
 252 am__include = @am__include@
 253 am__leading_dot = @am__leading_dot@
 254 am__quote = @am__quote@
 255 am__tar = @am__tar@
 256 am__untar = @am__untar@
 257 bindir = @bindir@
 258 build = @build@
 259 build_alias = @build_alias@
 260 build_cpu = @build_cpu@
 261 build_os = @build_os@
 262 build_vendor = @build_vendor@
 263 builddir = @builddir@
 264 datadir = @datadir@
 265 datarootdir = @datarootdir@
 266 docdir = @docdir@
 267 dvidir = @dvidir@
 268 exec_prefix = @exec_prefix@
 269 host = @host@
 270 host_alias = @host_alias@
 271 host_cpu = @host_cpu@
 272 host_os = @host_os@
 273 host_vendor = @host_vendor@
 274 htmldir = @htmldir@
 275 includedir = @includedir@
 276 infodir = @infodir@
 277 install_sh = @install_sh@
 278 libdir = @libdir@
 279 libexecdir = @libexecdir@
 280 localedir = @localedir@
 281 localstatedir = @localstatedir@
 282 mandir = @mandir@
 283 mkdir_p = @mkdir_p@
 284 oldincludedir = @oldincludedir@
 285 pdfdir = @pdfdir@
 286 prefix = @prefix@
 287 program_transform_name = @program_transform_name@
 288 psdir = @psdir@
 289 sbindir = @sbindir@
 290 sharedstatedir = @sharedstatedir@
 291 srcdir = @srcdir@
 292 sysconfdir = @sysconfdir@
 293 target_alias = @target_alias@
 294 top_build_prefix = @top_build_prefix@
 295 top_builddir = @top_builddir@
 296 top_srcdir = @top_srcdir@
 297 SUBDIRS = openpam_dump_policy $(am__append_1) $(am__append_2)
 298 all: all-recursive
 299
 300 .SUFFIXES:
 301 $(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
 302         @for dep in $?; do \
 303           case '$(am__configure_deps)' in \
 304             *$$dep*) \
 305               ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
 306                 && { if test -f $@; then exit 0; else break; fi; }; \
 307               exit 1;; \
 308           esac; \
 309         done; \
 310         echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign bin/Makefile'; \
 311         $(am__cd) $(top_srcdir) && \
 312           $(AUTOMAKE) --foreign bin/Makefile
 313 .PRECIOUS: Makefile
 314 Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
 315         @case '$?' in \
 316           *config.status*) \
 317             cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
 318           *) \
 319             echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
 320             cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
 321         esac;
 322
 323 $(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
 324         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 325
 326 $(top_srcdir)/configure:  $(am__configure_deps)
 327         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 328 $(ACLOCAL_M4):  $(am__aclocal_m4_deps)
 329         cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
 330 $(am__aclocal_m4_deps):
 331
 332 mostlyclean-libtool:
 333         -rm -f *.lo
 334
 335 clean-libtool:
 336         -rm -rf .libs _libs
 337
 338 # This directory's subdirectories are mostly independent; you can cd
 339 # into them and run 'make' without going through this Makefile.
 340 # To change the values of 'make' variables: instead of editing Makefiles,
 341 # (1) if the variable is set in 'config.status', edit 'config.status'
 342 #     (which will cause the Makefiles to be regenerated when you run 'make');
 343 # (2) otherwise, pass the desired values on the 'make' command line.
 344 $(am__recursive_targets):
 345         @fail=; \
 346         if $(am__make_keepgoing); then \
 347           failcom='fail=yes'; \
 348         else \
 349           failcom='exit 1'; \
 350         fi; \
 351         dot_seen=no; \
 352         target=`echo $@ | sed s/-recursive//`; \
 353         case "$@" in \
 354           distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
 355           *) list='$(SUBDIRS)' ;; \
 356         esac; \
 357         for subdir in $$list; do \
 358           echo "Making $$target in $$subdir"; \
 359           if test "$$subdir" = "."; then \
 360             dot_seen=yes; \
 361             local_target="$$target-am"; \
 362           else \
 363             local_target="$$target"; \
 364           fi; \
 365           ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
 366           || eval $$failcom; \
 367         done; \
 368         if test "$$dot_seen" = "no"; then \
 369           $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
 370         fi; test -z "$$fail"
 371
 372 ID: $(am__tagged_files)
 373         $(am__define_uniq_tagged_files); mkid -fID $$unique
 374 tags: tags-recursive
 375 TAGS: tags
 376
 377 tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 378         set x; \
 379         here=`pwd`; \
 380         if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
 381           include_option=--etags-include; \
 382           empty_fix=.; \
 383         else \
 384           include_option=--include; \
 385           empty_fix=; \
 386         fi; \
 387         list='$(SUBDIRS)'; for subdir in $$list; do \
 388           if test "$$subdir" = .; then :; else \
 389             test ! -f $$subdir/TAGS || \
 390               set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
 391           fi; \
 392         done; \
 393         $(am__define_uniq_tagged_files); \
 394         shift; \
 395         if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
 396           test -n "$$unique" || unique=$$empty_fix; \
 397           if test $$# -gt 0; then \
 398             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 399               "$$@" $$unique; \
 400           else \
 401             $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
 402               $$unique; \
 403           fi; \
 404         fi
 405 ctags: ctags-recursive
 406
 407 CTAGS: ctags
 408 ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
 409         $(am__define_uniq_tagged_files); \
 410         test -z "$(CTAGS_ARGS)$$unique" \
 411           || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
 412              $$unique
 413
 414 GTAGS:
 415         here=`$(am__cd) $(top_builddir) && pwd` \
 416           && $(am__cd) $(top_srcdir) \
 417           && gtags -i $(GTAGS_ARGS) "$$here"
 418 cscopelist: cscopelist-recursive
 419
 420 cscopelist-am: $(am__tagged_files)
 421         list='$(am__tagged_files)'; \
 422         case "$(srcdir)" in \
 423           [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
 424           *) sdir=$(subdir)/$(srcdir) ;; \
 425         esac; \
 426         for i in $$list; do \
 427           if test -f "$$i"; then \
 428             echo "$(subdir)/$$i"; \
 429           else \
 430             echo "$$sdir/$$i"; \
 431           fi; \
 432         done >> $(top_builddir)/cscope.files
 433
 434 distclean-tags:
 435         -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
 436
 437 distdir: $(DISTFILES)
 438         @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 439         topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 440         list='$(DISTFILES)'; \
 441           dist_files=`for file in $$list; do echo $$file; done | \
 442           sed -e "s|^$$srcdirstrip/||;t" \
 443               -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
 444         case $$dist_files in \
 445           */*) $(MKDIR_P) `echo "$$dist_files" | \
 446                            sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
 447                            sort -u` ;; \
 448         esac; \
 449         for file in $$dist_files; do \
 450           if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
 451           if test -d $$d/$$file; then \
 452             dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
 453             if test -d "$(distdir)/$$file"; then \
 454               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 455             fi; \
 456             if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
 457               cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
 458               find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
 459             fi; \
 460             cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
 461           else \
 462             test -f "$(distdir)/$$file" \
 463             || cp -p $$d/$$file "$(distdir)/$$file" \
 464             || exit 1; \
 465           fi; \
 466         done
 467         @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
 468           if test "$$subdir" = .; then :; else \
 469             $(am__make_dryrun) \
 470               || test -d "$(distdir)/$$subdir" \
 471               || $(MKDIR_P) "$(distdir)/$$subdir" \
 472               || exit 1; \
 473             dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
 474             $(am__relativize); \
 475             new_distdir=$$reldir; \
 476             dir1=$$subdir; dir2="$(top_distdir)"; \
 477             $(am__relativize); \
 478             new_top_distdir=$$reldir; \
 479             echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
 480             echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
 481             ($(am__cd) $$subdir && \
 482               $(MAKE) $(AM_MAKEFLAGS) \
 483                 top_distdir="$$new_top_distdir" \
 484                 distdir="$$new_distdir" \
 485                 am__remove_distdir=: \
 486                 am__skip_length_check=: \
 487                 am__skip_mode_fix=: \
 488                 distdir) \
 489               || exit 1; \
 490           fi; \
 491         done
 492 check-am: all-am
 493 check: check-recursive
 494 all-am: Makefile
 495 installdirs: installdirs-recursive
 496 installdirs-am:
 497 install: install-recursive
 498 install-exec: install-exec-recursive
 499 install-data: install-data-recursive
 500 uninstall: uninstall-recursive
 501
 502 install-am: all-am
 503         @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
 504
 505 installcheck: installcheck-recursive
 506 install-strip:
 507         if test -z '$(STRIP)'; then \
 508           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 509             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 510               install; \
 511         else \
 512           $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
 513             install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
 514             "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 515         fi
 516 mostlyclean-generic:
 517
 518 clean-generic:
 519
 520 distclean-generic:
 521         -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
 522         -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
 523
 524 maintainer-clean-generic:
 525         @echo "This command is intended for maintainers to use"
 526         @echo "it deletes files that may require special tools to rebuild."
 527 clean: clean-recursive
 528
 529 clean-am: clean-generic clean-libtool mostlyclean-am
 530
 531 distclean: distclean-recursive
 532         -rm -f Makefile
 533 distclean-am: clean-am distclean-generic distclean-tags
 534
 535 dvi: dvi-recursive
 536
 537 dvi-am:
 538
 539 html: html-recursive
 540
 541 html-am:
 542
 543 info: info-recursive
 544
 545 info-am:
 546
 547 install-data-am:
 548
 549 install-dvi: install-dvi-recursive
 550
 551 install-dvi-am:
 552
 553 install-exec-am:
 554
 555 install-html: install-html-recursive
 556
 557 install-html-am:
 558
 559 install-info: install-info-recursive
 560
 561 install-info-am:
 562
 563 install-man:
 564
 565 install-pdf: install-pdf-recursive
 566
 567 install-pdf-am:
 568
 569 install-ps: install-ps-recursive
 570
 571 install-ps-am:
 572
 573 installcheck-am:
 574
 575 maintainer-clean: maintainer-clean-recursive
 576         -rm -f Makefile
 577 maintainer-clean-am: distclean-am maintainer-clean-generic
 578
 579 mostlyclean: mostlyclean-recursive
 580
 581 mostlyclean-am: mostlyclean-generic mostlyclean-libtool
 582
 583 pdf: pdf-recursive
 584
 585 pdf-am:
 586
 587 ps: ps-recursive
 588
 589 ps-am:
 590
 591 uninstall-am:
 592
 593 .MAKE: $(am__recursive_targets) install-am install-strip
 594
 595 .PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
 596         check-am clean clean-generic clean-libtool cscopelist-am ctags \
 597         ctags-am distclean distclean-generic distclean-libtool \
 598         distclean-tags distdir dvi dvi-am html html-am info info-am \
 599         install install-am install-data install-data-am install-dvi \
 600         install-dvi-am install-exec install-exec-am install-html \
 601         install-html-am install-info install-info-am install-man \
 602         install-pdf install-pdf-am install-ps install-ps-am \
 603         install-strip installcheck installcheck-am installdirs \
 604         installdirs-am maintainer-clean maintainer-clean-generic \
 605         mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
 606         ps ps-am tags tags-am uninstall uninstall-am
 607
 608
 609 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 610 # Otherwise a system limit (for SysV at least) may be exceeded.
 611 .NOEXPORT: