2 * checkconf/unbound-control.c - remote control utility for unbound.
4 * Copyright (c) 2008, NLnet Labs. All rights reserved.
6 * This software is open source.
8 * Redistribution and use in source and binary forms, with or without
9 * modification, are permitted provided that the following conditions
12 * Redistributions of source code must retain the above copyright notice,
13 * this list of conditions and the following disclaimer.
15 * Redistributions in binary form must reproduce the above copyright notice,
16 * this list of conditions and the following disclaimer in the documentation
17 * and/or other materials provided with the distribution.
19 * Neither the name of the NLNET LABS nor the names of its contributors may
20 * be used to endorse or promote products derived from this software without
21 * specific prior written permission.
23 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
24 * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
25 * TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
26 * PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE
27 * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
28 * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
29 * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
30 * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
31 * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
32 * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
33 * POSSIBILITY OF SUCH DAMAGE.
39 * The remote control utility contacts the unbound server over ssl and
40 * sends the command, receives the answer, and displays the result
41 * from the commandline.
48 #ifdef HAVE_OPENSSL_SSL_H
49 #include <openssl/ssl.h>
51 #ifdef HAVE_OPENSSL_ERR_H
52 #include <openssl/err.h>
54 #ifdef HAVE_OPENSSL_RAND_H
55 #include <openssl/rand.h>
58 #include "util/config_file.h"
59 #include "util/locks.h"
60 #include "util/net_help.h"
62 /** Give unbound-control usage, and exit (1). */
66 printf("Usage: unbound-control [options] command\n");
67 printf(" Remote control utility for unbound server.\n");
69 printf(" -c file config file, default is %s\n", CONFIGFILE);
70 printf(" -s ip[@port] server address, if omitted config is used.\n");
71 printf(" -q quiet (don't print anything if it works ok).\n");
72 printf(" -h show this usage help.\n");
73 printf("Commands:\n");
74 printf(" start start server; runs unbound(8)\n");
75 printf(" stop stops the server\n");
76 printf(" reload reloads the server\n");
77 printf(" (this flushes data, stats, requestlist)\n");
78 printf(" stats print statistics\n");
79 printf(" stats_noreset peek at statistics\n");
80 printf(" status display status of server\n");
81 printf(" verbosity <number> change logging detail\n");
82 printf(" log_reopen close and open the logfile\n");
83 printf(" local_zone <name> <type> add new local zone\n");
84 printf(" local_zone_remove <name> remove local zone and its contents\n");
85 printf(" local_data <RR data...> add local data, for example\n");
86 printf(" local_data www.example.com A 192.0.2.1\n");
87 printf(" local_data_remove <name> remove local RR data from name\n");
88 printf(" dump_cache print cache to stdout\n");
89 printf(" load_cache load cache from stdin\n");
90 printf(" lookup <name> print nameservers for name\n");
91 printf(" flush <name> flushes common types for name from cache\n");
92 printf(" types: A, AAAA, MX, PTR, NS,\n");
93 printf(" SOA, CNAME, DNAME, SRV, NAPTR\n");
94 printf(" flush_type <name> <type> flush name, type from cache\n");
95 printf(" flush_zone <name> flush everything at or under name\n");
96 printf(" from rr and dnssec caches\n");
97 printf(" flush_bogus flush all bogus data\n");
98 printf(" flush_stats flush statistics, make zero\n");
99 printf(" flush_requestlist drop queries that are worked on\n");
100 printf(" dump_requestlist show what is worked on\n");
101 printf(" flush_infra [all | ip] remove ping, edns for one IP or all\n");
102 printf(" dump_infra show ping and edns entries\n");
103 printf(" set_option opt: val set option to value, no reload\n");
104 printf(" get_option opt get option value\n");
105 printf(" list_stubs list stub-zones and root hints in use\n");
106 printf(" list_forwards list forward-zones in use\n");
107 printf(" list_local_zones list local-zones in use\n");
108 printf(" list_local_data list local-data RRs in use\n");
109 printf(" forward_add [+i] zone addr.. add forward-zone with servers\n");
110 printf(" forward_remove [+i] zone remove forward zone\n");
111 printf(" stub_add [+ip] zone addr.. add stub-zone with servers\n");
112 printf(" stub_remove [+i] zone remove stub zone\n");
113 printf(" +i also do dnssec insecure point\n");
114 printf(" +p set stub to use priming\n");
115 printf(" forward [off | addr ...] without arg show forward setup\n");
116 printf(" or off to turn off root forwarding\n");
117 printf(" or give list of ip addresses\n");
118 printf("Version %s\n", PACKAGE_VERSION);
119 printf("BSD licensed, see LICENSE in source package for details.\n");
120 printf("Report bugs to %s\n", PACKAGE_BUGREPORT);
124 /** exit with ssl error */
125 static void ssl_err(const char* s)
127 fprintf(stderr, "error: %s\n", s);
128 ERR_print_errors_fp(stderr);
132 /** setup SSL context */
134 setup_ctx(struct config_file* cfg)
136 char* s_cert, *c_key, *c_cert;
139 s_cert = fname_after_chroot(cfg->server_cert_file, cfg, 1);
140 c_key = fname_after_chroot(cfg->control_key_file, cfg, 1);
141 c_cert = fname_after_chroot(cfg->control_cert_file, cfg, 1);
142 if(!s_cert || !c_key || !c_cert)
143 fatal_exit("out of memory");
144 ctx = SSL_CTX_new(SSLv23_client_method());
146 ssl_err("could not allocate SSL_CTX pointer");
147 if(!(SSL_CTX_set_options(ctx, SSL_OP_NO_SSLv2) & SSL_OP_NO_SSLv2))
148 ssl_err("could not set SSL_OP_NO_SSLv2");
149 if(!SSL_CTX_use_certificate_file(ctx,c_cert,SSL_FILETYPE_PEM) ||
150 !SSL_CTX_use_PrivateKey_file(ctx,c_key,SSL_FILETYPE_PEM)
151 || !SSL_CTX_check_private_key(ctx))
152 ssl_err("Error setting up SSL_CTX client key and cert");
153 if (SSL_CTX_load_verify_locations(ctx, s_cert, NULL) != 1)
154 ssl_err("Error setting up SSL_CTX verify, server cert");
155 SSL_CTX_set_verify(ctx, SSL_VERIFY_PEER, NULL);
163 /** contact the server with TCP connect */
165 contact_server(const char* svr, struct config_file* cfg, int statuscmd)
167 struct sockaddr_storage addr;
170 /* use svr or the first config entry */
173 svr = cfg->control_ifs->str;
174 else svr = "127.0.0.1";
175 /* config 0 addr (everything), means ask localhost */
176 if(strcmp(svr, "0.0.0.0") == 0)
178 else if(strcmp(svr, "::0") == 0 ||
179 strcmp(svr, "0::0") == 0 ||
180 strcmp(svr, "0::") == 0 ||
181 strcmp(svr, "::") == 0)
184 if(strchr(svr, '@')) {
185 if(!extstrtoaddr(svr, &addr, &addrlen))
186 fatal_exit("could not parse IP@port: %s", svr);
188 if(!ipstrtoaddr(svr, cfg->control_port, &addr, &addrlen))
189 fatal_exit("could not parse IP: %s", svr);
191 fd = socket(addr_is_ip6(&addr, addrlen)?AF_INET6:AF_INET,
195 fatal_exit("socket: %s", strerror(errno));
197 fatal_exit("socket: %s", wsa_strerror(WSAGetLastError()));
200 if(connect(fd, (struct sockaddr*)&addr, addrlen) < 0) {
201 log_addr(0, "address", &addr, addrlen);
203 log_err("connect: %s", strerror(errno));
204 if(errno == ECONNREFUSED && statuscmd) {
205 printf("unbound is stopped\n");
209 log_err("connect: %s", wsa_strerror(WSAGetLastError()));
210 if(WSAGetLastError() == WSAECONNREFUSED && statuscmd) {
211 printf("unbound is stopped\n");
220 /** setup SSL on the connection */
222 setup_ssl(SSL_CTX* ctx, int fd)
230 ssl_err("could not SSL_new");
231 SSL_set_connect_state(ssl);
232 (void)SSL_set_mode(ssl, SSL_MODE_AUTO_RETRY);
233 if(!SSL_set_fd(ssl, fd))
234 ssl_err("could not SSL_set_fd");
237 if( (r=SSL_do_handshake(ssl)) == 1)
239 r = SSL_get_error(ssl, r);
240 if(r != SSL_ERROR_WANT_READ && r != SSL_ERROR_WANT_WRITE)
241 ssl_err("SSL handshake failed");
242 /* wants to be called again */
245 /* check authenticity of server */
246 if(SSL_get_verify_result(ssl) != X509_V_OK)
247 ssl_err("SSL verification failed");
248 x = SSL_get_peer_certificate(ssl);
250 ssl_err("Server presented no peer certificate");
255 /** send stdin to server */
257 send_file(SSL* ssl, FILE* in, char* buf, size_t sz)
259 while(fgets(buf, (int)sz, in)) {
260 if(SSL_write(ssl, buf, (int)strlen(buf)) <= 0)
261 ssl_err("could not SSL_write contents");
265 /** send command and display result */
267 go_cmd(SSL* ssl, int quiet, int argc, char* argv[])
270 const char* space=" ";
271 const char* newline="\n";
272 int was_error = 0, first_line = 1;
275 snprintf(pre, sizeof(pre), "UBCT%d ", UNBOUND_CONTROL_VERSION);
276 if(SSL_write(ssl, pre, (int)strlen(pre)) <= 0)
277 ssl_err("could not SSL_write");
278 for(i=0; i<argc; i++) {
279 if(SSL_write(ssl, space, (int)strlen(space)) <= 0)
280 ssl_err("could not SSL_write");
281 if(SSL_write(ssl, argv[i], (int)strlen(argv[i])) <= 0)
282 ssl_err("could not SSL_write");
284 if(SSL_write(ssl, newline, (int)strlen(newline)) <= 0)
285 ssl_err("could not SSL_write");
287 if(argc == 1 && strcmp(argv[0], "load_cache") == 0) {
288 send_file(ssl, stdin, buf, sizeof(buf));
293 if((r = SSL_read(ssl, buf, (int)sizeof(buf)-1)) <= 0) {
294 if(SSL_get_error(ssl, r) == SSL_ERROR_ZERO_RETURN) {
298 ssl_err("could not SSL_read");
301 if(first_line && strncmp(buf, "error", 5) == 0) {
312 /** go ahead and read config, contact server and perform command and display */
314 go(const char* cfgfile, char* svr, int quiet, int argc, char* argv[])
316 struct config_file* cfg;
322 if(!(cfg = config_create()))
323 fatal_exit("out of memory");
324 if(!config_read(cfg, cfgfile, NULL))
325 fatal_exit("could not read config file");
326 if(!cfg->remote_control_enable)
327 log_warn("control-enable is 'no' in the config file.");
328 ctx = setup_ctx(cfg);
331 fd = contact_server(svr, cfg, argc>0&&strcmp(argv[0],"status")==0);
332 ssl = setup_ssl(ctx, fd);
335 ret = go_cmd(ssl, quiet, argc, argv);
348 /** getopt global, in case header files fail to declare it. */
350 /** getopt global, in case header files fail to declare it. */
353 /** Main routine for unbound-control */
354 int main(int argc, char* argv[])
358 const char* cfgfile = CONFIGFILE;
364 #ifdef USE_THREAD_DEBUG
365 /* stop the file output from unbound-control, overwites the servers */
366 extern int check_locking_order;
367 check_locking_order = 0;
368 #endif /* USE_THREAD_DEBUG */
369 log_ident_set("unbound-control");
370 log_init(NULL, 0, NULL);
373 if((r = WSAStartup(MAKEWORD(2,2), &wsa_data)) != 0)
374 fatal_exit("WSAStartup failed: %s", wsa_strerror(r));
375 /* use registry config file in preference to compiletime location */
376 if(!(cfgfile=w_lookup_reg_str("Software\\Unbound", "ConfigFile")))
377 cfgfile = CONFIGFILE;
380 ERR_load_crypto_strings();
381 ERR_load_SSL_strings();
382 OpenSSL_add_all_algorithms();
383 (void)SSL_library_init();
387 unsigned char buf[256];
388 unsigned int seed=(unsigned)time(NULL) ^ (unsigned)getpid();
389 unsigned int v = seed;
391 for(i=0; i<256/sizeof(v); i++) {
392 memmove(buf+i*sizeof(v), &v, sizeof(v));
393 v = v*seed + (unsigned int)i;
396 log_warn("no entropy, seeding openssl PRNG with time\n");
399 /* parse the options */
400 while( (c=getopt(argc, argv, "c:s:qh")) != -1) {
421 if(argc >= 1 && strcmp(argv[0], "start")==0) {
422 if(execlp("unbound", "unbound", "-c", cfgfile,
424 fatal_exit("could not exec unbound: %s",
429 ret = go(cfgfile, svr, quiet, argc, argv);