contrib/wpa/wpa_supplicant/examples/wps-ap-cli

   1 #!/bin/sh
   2
   3 CLI=wpa_cli
   4
   5 pbc()
   6 {
   7         echo "Starting PBC mode"
   8         echo "Push button on the station within two minutes"
   9         if ! $CLI wps_pbc | grep -q OK; then
  10                 echo "Failed to enable PBC mode"
  11         fi
  12 }
  13
  14 enter_pin()
  15 {
  16         echo "Enter a PIN from a station to be enrolled to the network."
  17         read -p "Enrollee PIN: " pin
  18         cpin=`$CLI wps_check_pin "$pin" | tail -1`
  19         if [ "$cpin" = "FAIL-CHECKSUM" ]; then
  20                 echo "Checksum digit is not valid"
  21                 read -p "Do you want to use this PIN (y/n)? " resp
  22                 case "$resp" in
  23                         y*)
  24                                 cpin=`echo "$pin" | sed "s/[^1234567890]//g"`
  25                                 ;;
  26                         *)
  27                                 return 1
  28                                 ;;
  29                 esac
  30         fi
  31         if [ "$cpin" = "FAIL" ]; then
  32                 echo "Invalid PIN: $pin"
  33                 return 1
  34         fi
  35         echo "Enabling Enrollee PIN: $cpin"
  36         $CLI wps_pin any "$cpin"
  37 }
  38
  39 show_config()
  40 {
  41         $CLI status wps
  42 }
  43
  44 main_menu()
  45 {
  46         echo "WPS AP"
  47         echo "------"
  48         echo "1: Push button (activate PBC)"
  49         echo "2: Enter Enrollee PIN"
  50         echo "3: Show current configuration"
  51         echo "0: Exit wps-ap-cli"
  52
  53         read -p "Command: " cmd
  54
  55         case "$cmd" in
  56                 1)
  57                         pbc
  58                         ;;
  59                 2)
  60                         enter_pin
  61                         ;;
  62                 3)
  63                         show_config
  64                         ;;
  65                 0)
  66                         exit 0
  67                         ;;
  68                 *)
  69                         echo "Unknown command: $cmd"
  70                         ;;
  71         esac
  72
  73         echo
  74         main_menu
  75 }
  76
  77
  78 main_menu