contrib/wpa/wpa_supplicant/scan.c

   1 /*
   2  * WPA Supplicant - Scanning
   3  * Copyright (c) 2003-2012, Jouni Malinen <j@w1.fi>
   4  *
   5  * This software may be distributed under the terms of the BSD license.
   6  * See README for more details.
   7  */
   8
   9 #include "utils/includes.h"
  10
  11 #include "utils/common.h"
  12 #include "utils/eloop.h"
  13 #include "common/ieee802_11_defs.h"
  14 #include "config.h"
  15 #include "wpa_supplicant_i.h"
  16 #include "driver_i.h"
  17 #include "wps_supplicant.h"
  18 #include "p2p_supplicant.h"
  19 #include "p2p/p2p.h"
  20 #include "hs20_supplicant.h"
  21 #include "notify.h"
  22 #include "bss.h"
  23 #include "scan.h"
  24
  25
  26 static void wpa_supplicant_gen_assoc_event(struct wpa_supplicant *wpa_s)
  27 {
  28         struct wpa_ssid *ssid;
  29         union wpa_event_data data;
  30
  31         ssid = wpa_supplicant_get_ssid(wpa_s);
  32         if (ssid == NULL)
  33                 return;
  34
  35         if (wpa_s->current_ssid == NULL) {
  36                 wpa_s->current_ssid = ssid;
  37                 if (wpa_s->current_ssid != NULL)
  38                         wpas_notify_network_changed(wpa_s);
  39         }
  40         wpa_supplicant_initiate_eapol(wpa_s);
  41         wpa_dbg(wpa_s, MSG_DEBUG, "Already associated with a configured "
  42                 "network - generating associated event");
  43         os_memset(&data, 0, sizeof(data));
  44         wpa_supplicant_event(wpa_s, EVENT_ASSOC, &data);
  45 }
  46
  47
  48 #ifdef CONFIG_WPS
  49 static int wpas_wps_in_use(struct wpa_supplicant *wpa_s,
  50                            enum wps_request_type *req_type)
  51 {
  52         struct wpa_ssid *ssid;
  53         int wps = 0;
  54
  55         for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
  56                 if (!(ssid->key_mgmt & WPA_KEY_MGMT_WPS))
  57                         continue;
  58
  59                 wps = 1;
  60                 *req_type = wpas_wps_get_req_type(ssid);
  61                 if (!ssid->eap.phase1)
  62                         continue;
  63
  64                 if (os_strstr(ssid->eap.phase1, "pbc=1"))
  65                         return 2;
  66         }
  67
  68 #ifdef CONFIG_P2P
  69         if (!wpa_s->global->p2p_disabled && wpa_s->global->p2p &&
  70             !wpa_s->conf->p2p_disabled) {
  71                 wpa_s->wps->dev.p2p = 1;
  72                 if (!wps) {
  73                         wps = 1;
  74                         *req_type = WPS_REQ_ENROLLEE_INFO;
  75                 }
  76         }
  77 #endif /* CONFIG_P2P */
  78
  79         return wps;
  80 }
  81 #endif /* CONFIG_WPS */
  82
  83
  84 /**
  85  * wpa_supplicant_enabled_networks - Check whether there are enabled networks
  86  * @wpa_s: Pointer to wpa_supplicant data
  87  * Returns: 0 if no networks are enabled, >0 if networks are enabled
  88  *
  89  * This function is used to figure out whether any networks (or Interworking
  90  * with enabled credentials and auto_interworking) are present in the current
  91  * configuration.
  92  */
  93 int wpa_supplicant_enabled_networks(struct wpa_supplicant *wpa_s)
  94 {
  95         struct wpa_ssid *ssid = wpa_s->conf->ssid;
  96         int count = 0, disabled = 0;
  97         while (ssid) {
  98                 if (!wpas_network_disabled(wpa_s, ssid))
  99                         count++;
 100                 else
 101                         disabled++;
 102                 ssid = ssid->next;
 103         }
 104         if (wpa_s->conf->cred && wpa_s->conf->interworking &&
 105             wpa_s->conf->auto_interworking)
 106                 count++;
 107         if (count == 0 && disabled > 0) {
 108                 wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks (%d disabled "
 109                         "networks)", disabled);
 110         }
 111         return count;
 112 }
 113
 114
 115 static void wpa_supplicant_assoc_try(struct wpa_supplicant *wpa_s,
 116                                      struct wpa_ssid *ssid)
 117 {
 118         while (ssid) {
 119                 if (!wpas_network_disabled(wpa_s, ssid))
 120                         break;
 121                 ssid = ssid->next;
 122         }
 123
 124         /* ap_scan=2 mode - try to associate with each SSID. */
 125         if (ssid == NULL) {
 126                 wpa_dbg(wpa_s, MSG_DEBUG, "wpa_supplicant_assoc_try: Reached "
 127                         "end of scan list - go back to beginning");
 128                 wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
 129                 wpa_supplicant_req_scan(wpa_s, 0, 0);
 130                 return;
 131         }
 132         if (ssid->next) {
 133                 /* Continue from the next SSID on the next attempt. */
 134                 wpa_s->prev_scan_ssid = ssid;
 135         } else {
 136                 /* Start from the beginning of the SSID list. */
 137                 wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
 138         }
 139         wpa_supplicant_associate(wpa_s, NULL, ssid);
 140 }
 141
 142
 143 static int int_array_len(const int *a)
 144 {
 145         int i;
 146         for (i = 0; a && a[i]; i++)
 147                 ;
 148         return i;
 149 }
 150
 151
 152 static void int_array_concat(int **res, const int *a)
 153 {
 154         int reslen, alen, i;
 155         int *n;
 156
 157         reslen = int_array_len(*res);
 158         alen = int_array_len(a);
 159
 160         n = os_realloc_array(*res, reslen + alen + 1, sizeof(int));
 161         if (n == NULL) {
 162                 os_free(*res);
 163                 *res = NULL;
 164                 return;
 165         }
 166         for (i = 0; i <= alen; i++)
 167                 n[reslen + i] = a[i];
 168         *res = n;
 169 }
 170
 171
 172 static int freq_cmp(const void *a, const void *b)
 173 {
 174         int _a = *(int *) a;
 175         int _b = *(int *) b;
 176
 177         if (_a == 0)
 178                 return 1;
 179         if (_b == 0)
 180                 return -1;
 181         return _a - _b;
 182 }
 183
 184
 185 static void int_array_sort_unique(int *a)
 186 {
 187         int alen;
 188         int i, j;
 189
 190         if (a == NULL)
 191                 return;
 192
 193         alen = int_array_len(a);
 194         qsort(a, alen, sizeof(int), freq_cmp);
 195
 196         i = 0;
 197         j = 1;
 198         while (a[i] && a[j]) {
 199                 if (a[i] == a[j]) {
 200                         j++;
 201                         continue;
 202                 }
 203                 a[++i] = a[j++];
 204         }
 205         if (a[i])
 206                 i++;
 207         a[i] = 0;
 208 }
 209
 210
 211 /**
 212  * wpa_supplicant_trigger_scan - Request driver to start a scan
 213  * @wpa_s: Pointer to wpa_supplicant data
 214  * @params: Scan parameters
 215  * Returns: 0 on success, -1 on failure
 216  */
 217 int wpa_supplicant_trigger_scan(struct wpa_supplicant *wpa_s,
 218                                 struct wpa_driver_scan_params *params)
 219 {
 220         int ret;
 221
 222         wpa_supplicant_notify_scanning(wpa_s, 1);
 223
 224         ret = wpa_drv_scan(wpa_s, params);
 225         if (ret) {
 226                 wpa_supplicant_notify_scanning(wpa_s, 0);
 227                 wpas_notify_scan_done(wpa_s, 0);
 228         } else {
 229                 wpa_s->scan_runs++;
 230                 wpa_s->normal_scans++;
 231         }
 232
 233         return ret;
 234 }
 235
 236
 237 static void
 238 wpa_supplicant_delayed_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx)
 239 {
 240         struct wpa_supplicant *wpa_s = eloop_ctx;
 241
 242         wpa_dbg(wpa_s, MSG_DEBUG, "Starting delayed sched scan");
 243
 244         if (wpa_supplicant_req_sched_scan(wpa_s))
 245                 wpa_supplicant_req_scan(wpa_s, 0, 0);
 246 }
 247
 248
 249 static void
 250 wpa_supplicant_sched_scan_timeout(void *eloop_ctx, void *timeout_ctx)
 251 {
 252         struct wpa_supplicant *wpa_s = eloop_ctx;
 253
 254         wpa_dbg(wpa_s, MSG_DEBUG, "Sched scan timeout - stopping it");
 255
 256         wpa_s->sched_scan_timed_out = 1;
 257         wpa_supplicant_cancel_sched_scan(wpa_s);
 258 }
 259
 260
 261 static int
 262 wpa_supplicant_start_sched_scan(struct wpa_supplicant *wpa_s,
 263                                 struct wpa_driver_scan_params *params,
 264                                 int interval)
 265 {
 266         int ret;
 267
 268         wpa_supplicant_notify_scanning(wpa_s, 1);
 269         ret = wpa_drv_sched_scan(wpa_s, params, interval * 1000);
 270         if (ret)
 271                 wpa_supplicant_notify_scanning(wpa_s, 0);
 272         else
 273                 wpa_s->sched_scanning = 1;
 274
 275         return ret;
 276 }
 277
 278
 279 static int wpa_supplicant_stop_sched_scan(struct wpa_supplicant *wpa_s)
 280 {
 281         int ret;
 282
 283         ret = wpa_drv_stop_sched_scan(wpa_s);
 284         if (ret) {
 285                 wpa_dbg(wpa_s, MSG_DEBUG, "stopping sched_scan failed!");
 286                 /* TODO: what to do if stopping fails? */
 287                 return -1;
 288         }
 289
 290         return ret;
 291 }
 292
 293
 294 static struct wpa_driver_scan_filter *
 295 wpa_supplicant_build_filter_ssids(struct wpa_config *conf, size_t *num_ssids)
 296 {
 297         struct wpa_driver_scan_filter *ssids;
 298         struct wpa_ssid *ssid;
 299         size_t count;
 300
 301         *num_ssids = 0;
 302         if (!conf->filter_ssids)
 303                 return NULL;
 304
 305         for (count = 0, ssid = conf->ssid; ssid; ssid = ssid->next) {
 306                 if (ssid->ssid && ssid->ssid_len)
 307                         count++;
 308         }
 309         if (count == 0)
 310                 return NULL;
 311         ssids = os_zalloc(count * sizeof(struct wpa_driver_scan_filter));
 312         if (ssids == NULL)
 313                 return NULL;
 314
 315         for (ssid = conf->ssid; ssid; ssid = ssid->next) {
 316                 if (!ssid->ssid || !ssid->ssid_len)
 317                         continue;
 318                 os_memcpy(ssids[*num_ssids].ssid, ssid->ssid, ssid->ssid_len);
 319                 ssids[*num_ssids].ssid_len = ssid->ssid_len;
 320                 (*num_ssids)++;
 321         }
 322
 323         return ssids;
 324 }
 325
 326
 327 static void wpa_supplicant_optimize_freqs(
 328         struct wpa_supplicant *wpa_s, struct wpa_driver_scan_params *params)
 329 {
 330 #ifdef CONFIG_P2P
 331         if (params->freqs == NULL && wpa_s->p2p_in_provisioning &&
 332             wpa_s->go_params) {
 333                 /* Optimize provisioning state scan based on GO information */
 334                 if (wpa_s->p2p_in_provisioning < 5 &&
 335                     wpa_s->go_params->freq > 0) {
 336                         wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only GO "
 337                                 "preferred frequency %d MHz",
 338                                 wpa_s->go_params->freq);
 339                         params->freqs = os_zalloc(2 * sizeof(int));
 340                         if (params->freqs)
 341                                 params->freqs[0] = wpa_s->go_params->freq;
 342                 } else if (wpa_s->p2p_in_provisioning < 8 &&
 343                            wpa_s->go_params->freq_list[0]) {
 344                         wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only common "
 345                                 "channels");
 346                         int_array_concat(&params->freqs,
 347                                          wpa_s->go_params->freq_list);
 348                         if (params->freqs)
 349                                 int_array_sort_unique(params->freqs);
 350                 }
 351                 wpa_s->p2p_in_provisioning++;
 352         }
 353 #endif /* CONFIG_P2P */
 354
 355 #ifdef CONFIG_WPS
 356         if (params->freqs == NULL && wpa_s->after_wps && wpa_s->wps_freq) {
 357                 /*
 358                  * Optimize post-provisioning scan based on channel used
 359                  * during provisioning.
 360                  */
 361                 wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz "
 362                         "that was used during provisioning", wpa_s->wps_freq);
 363                 params->freqs = os_zalloc(2 * sizeof(int));
 364                 if (params->freqs)
 365                         params->freqs[0] = wpa_s->wps_freq;
 366                 wpa_s->after_wps--;
 367         }
 368
 369         if (params->freqs == NULL && wpa_s->known_wps_freq && wpa_s->wps_freq)
 370         {
 371                 /* Optimize provisioning scan based on already known channel */
 372                 wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Scan only frequency %u MHz",
 373                         wpa_s->wps_freq);
 374                 params->freqs = os_zalloc(2 * sizeof(int));
 375                 if (params->freqs)
 376                         params->freqs[0] = wpa_s->wps_freq;
 377                 wpa_s->known_wps_freq = 0; /* only do this once */
 378         }
 379 #endif /* CONFIG_WPS */
 380 }
 381
 382
 383 #ifdef CONFIG_INTERWORKING
 384 static void wpas_add_interworking_elements(struct wpa_supplicant *wpa_s,
 385                                            struct wpabuf *buf)
 386 {
 387         if (wpa_s->conf->interworking == 0)
 388                 return;
 389
 390         wpabuf_put_u8(buf, WLAN_EID_EXT_CAPAB);
 391         wpabuf_put_u8(buf, 4);
 392         wpabuf_put_u8(buf, 0x00);
 393         wpabuf_put_u8(buf, 0x00);
 394         wpabuf_put_u8(buf, 0x00);
 395         wpabuf_put_u8(buf, 0x80); /* Bit 31 - Interworking */
 396
 397         wpabuf_put_u8(buf, WLAN_EID_INTERWORKING);
 398         wpabuf_put_u8(buf, is_zero_ether_addr(wpa_s->conf->hessid) ? 1 :
 399                       1 + ETH_ALEN);
 400         wpabuf_put_u8(buf, wpa_s->conf->access_network_type);
 401         /* No Venue Info */
 402         if (!is_zero_ether_addr(wpa_s->conf->hessid))
 403                 wpabuf_put_data(buf, wpa_s->conf->hessid, ETH_ALEN);
 404 }
 405 #endif /* CONFIG_INTERWORKING */
 406
 407
 408 static struct wpabuf * wpa_supplicant_extra_ies(struct wpa_supplicant *wpa_s)
 409 {
 410         struct wpabuf *extra_ie = NULL;
 411 #ifdef CONFIG_WPS
 412         int wps = 0;
 413         enum wps_request_type req_type = WPS_REQ_ENROLLEE_INFO;
 414 #endif /* CONFIG_WPS */
 415
 416 #ifdef CONFIG_INTERWORKING
 417         if (wpa_s->conf->interworking &&
 418             wpabuf_resize(&extra_ie, 100) == 0)
 419                 wpas_add_interworking_elements(wpa_s, extra_ie);
 420 #endif /* CONFIG_INTERWORKING */
 421
 422 #ifdef CONFIG_WPS
 423         wps = wpas_wps_in_use(wpa_s, &req_type);
 424
 425         if (wps) {
 426                 struct wpabuf *wps_ie;
 427                 wps_ie = wps_build_probe_req_ie(wps == 2 ? DEV_PW_PUSHBUTTON :
 428                                                 DEV_PW_DEFAULT,
 429                                                 &wpa_s->wps->dev,
 430                                                 wpa_s->wps->uuid, req_type,
 431                                                 0, NULL);
 432                 if (wps_ie) {
 433                         if (wpabuf_resize(&extra_ie, wpabuf_len(wps_ie)) == 0)
 434                                 wpabuf_put_buf(extra_ie, wps_ie);
 435                         wpabuf_free(wps_ie);
 436                 }
 437         }
 438
 439 #ifdef CONFIG_P2P
 440         if (wps) {
 441                 size_t ielen = p2p_scan_ie_buf_len(wpa_s->global->p2p);
 442                 if (wpabuf_resize(&extra_ie, ielen) == 0)
 443                         wpas_p2p_scan_ie(wpa_s, extra_ie);
 444         }
 445 #endif /* CONFIG_P2P */
 446
 447 #endif /* CONFIG_WPS */
 448
 449         return extra_ie;
 450 }
 451
 452
 453 #ifdef CONFIG_P2P
 454
 455 /*
 456  * Check whether there are any enabled networks or credentials that could be
 457  * used for a non-P2P connection.
 458  */
 459 static int non_p2p_network_enabled(struct wpa_supplicant *wpa_s)
 460 {
 461         struct wpa_ssid *ssid;
 462
 463         for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
 464                 if (wpas_network_disabled(wpa_s, ssid))
 465                         continue;
 466                 if (!ssid->p2p_group)
 467                         return 1;
 468         }
 469
 470         if (wpa_s->conf->cred && wpa_s->conf->interworking &&
 471             wpa_s->conf->auto_interworking)
 472                 return 1;
 473
 474         return 0;
 475 }
 476
 477
 478 /*
 479  * Find the operating frequency of any other virtual interface that is using
 480  * the same radio concurrently.
 481  */
 482 static int shared_vif_oper_freq(struct wpa_supplicant *wpa_s)
 483 {
 484         const char *rn, *rn2;
 485         struct wpa_supplicant *ifs;
 486         u8 bssid[ETH_ALEN];
 487
 488         if (!wpa_s->driver->get_radio_name)
 489                 return -1;
 490
 491         rn = wpa_s->driver->get_radio_name(wpa_s->drv_priv);
 492         if (rn == NULL || rn[0] == '\0')
 493                 return -1;
 494
 495         for (ifs = wpa_s->global->ifaces; ifs; ifs = ifs->next) {
 496                 if (ifs == wpa_s || !ifs->driver->get_radio_name)
 497                         continue;
 498
 499                 rn2 = ifs->driver->get_radio_name(ifs->drv_priv);
 500                 if (!rn2 || os_strcmp(rn, rn2) != 0)
 501                         continue;
 502
 503                 if (ifs->current_ssid == NULL || ifs->assoc_freq == 0)
 504                         continue;
 505
 506                 if (ifs->current_ssid->mode == WPAS_MODE_AP ||
 507                     ifs->current_ssid->mode == WPAS_MODE_P2P_GO)
 508                         return ifs->current_ssid->frequency;
 509                 if (wpa_drv_get_bssid(ifs, bssid) == 0)
 510                         return ifs->assoc_freq;
 511         }
 512
 513         return 0;
 514 }
 515
 516 #endif /* CONFIG_P2P */
 517
 518
 519 static void wpa_supplicant_scan(void *eloop_ctx, void *timeout_ctx)
 520 {
 521         struct wpa_supplicant *wpa_s = eloop_ctx;
 522         struct wpa_ssid *ssid;
 523         enum scan_req_type scan_req = NORMAL_SCAN_REQ;
 524         int ret;
 525         struct wpabuf *extra_ie = NULL;
 526         struct wpa_driver_scan_params params;
 527         struct wpa_driver_scan_params *scan_params;
 528         size_t max_ssids;
 529         enum wpa_states prev_state;
 530
 531         if (wpa_s->wpa_state == WPA_INTERFACE_DISABLED) {
 532                 wpa_dbg(wpa_s, MSG_DEBUG, "Skip scan - interface disabled");
 533                 return;
 534         }
 535
 536         if (wpa_s->disconnected && wpa_s->scan_req == NORMAL_SCAN_REQ) {
 537                 wpa_dbg(wpa_s, MSG_DEBUG, "Disconnected - do not scan");
 538                 wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
 539                 return;
 540         }
 541
 542         if (!wpa_supplicant_enabled_networks(wpa_s) &&
 543             wpa_s->scan_req == NORMAL_SCAN_REQ) {
 544                 wpa_dbg(wpa_s, MSG_DEBUG, "No enabled networks - do not scan");
 545                 wpa_supplicant_set_state(wpa_s, WPA_INACTIVE);
 546 #ifdef CONFIG_P2P
 547                 wpa_s->sta_scan_pending = 0;
 548 #endif /* CONFIG_P2P */
 549                 return;
 550         }
 551
 552         if (wpa_s->conf->ap_scan != 0 &&
 553             (wpa_s->drv_flags & WPA_DRIVER_FLAGS_WIRED)) {
 554                 wpa_dbg(wpa_s, MSG_DEBUG, "Using wired authentication - "
 555                         "overriding ap_scan configuration");
 556                 wpa_s->conf->ap_scan = 0;
 557                 wpas_notify_ap_scan_changed(wpa_s);
 558         }
 559
 560         if (wpa_s->conf->ap_scan == 0) {
 561                 wpa_supplicant_gen_assoc_event(wpa_s);
 562                 return;
 563         }
 564
 565 #ifdef CONFIG_P2P
 566         if (wpas_p2p_in_progress(wpa_s)) {
 567                 if (wpa_s->sta_scan_pending &&
 568                     wpas_p2p_in_progress(wpa_s) == 2 &&
 569                     wpa_s->global->p2p_cb_on_scan_complete) {
 570                         wpa_dbg(wpa_s, MSG_DEBUG, "Process pending station "
 571                                 "mode scan during P2P search");
 572                 } else {
 573                         wpa_dbg(wpa_s, MSG_DEBUG, "Delay station mode scan "
 574                                 "while P2P operation is in progress");
 575                         wpa_s->sta_scan_pending = 1;
 576                         wpa_supplicant_req_scan(wpa_s, 5, 0);
 577                         return;
 578                 }
 579         }
 580 #endif /* CONFIG_P2P */
 581
 582         if (wpa_s->conf->ap_scan == 2)
 583                 max_ssids = 1;
 584         else {
 585                 max_ssids = wpa_s->max_scan_ssids;
 586                 if (max_ssids > WPAS_MAX_SCAN_SSIDS)
 587                         max_ssids = WPAS_MAX_SCAN_SSIDS;
 588         }
 589
 590         scan_req = wpa_s->scan_req;
 591         wpa_s->scan_req = NORMAL_SCAN_REQ;
 592
 593         os_memset(&params, 0, sizeof(params));
 594
 595         prev_state = wpa_s->wpa_state;
 596         if (wpa_s->wpa_state == WPA_DISCONNECTED ||
 597             wpa_s->wpa_state == WPA_INACTIVE)
 598                 wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
 599
 600         /*
 601          * If autoscan has set its own scanning parameters
 602          */
 603         if (wpa_s->autoscan_params != NULL) {
 604                 scan_params = wpa_s->autoscan_params;
 605                 goto scan;
 606         }
 607
 608         if (scan_req != MANUAL_SCAN_REQ && wpa_s->connect_without_scan) {
 609                 for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
 610                         if (ssid == wpa_s->connect_without_scan)
 611                                 break;
 612                 }
 613                 wpa_s->connect_without_scan = NULL;
 614                 if (ssid) {
 615                         wpa_printf(MSG_DEBUG, "Start a pre-selected network "
 616                                    "without scan step");
 617                         wpa_supplicant_associate(wpa_s, NULL, ssid);
 618                         return;
 619                 }
 620         }
 621
 622 #ifdef CONFIG_P2P
 623         if ((wpa_s->p2p_in_provisioning || wpa_s->show_group_started) &&
 624             wpa_s->go_params) {
 625                 wpa_printf(MSG_DEBUG, "P2P: Use specific SSID for scan during "
 626                            "P2P group formation");
 627                 params.ssids[0].ssid = wpa_s->go_params->ssid;
 628                 params.ssids[0].ssid_len = wpa_s->go_params->ssid_len;
 629                 params.num_ssids = 1;
 630                 goto ssid_list_set;
 631         }
 632 #endif /* CONFIG_P2P */
 633
 634         /* Find the starting point from which to continue scanning */
 635         ssid = wpa_s->conf->ssid;
 636         if (wpa_s->prev_scan_ssid != WILDCARD_SSID_SCAN) {
 637                 while (ssid) {
 638                         if (ssid == wpa_s->prev_scan_ssid) {
 639                                 ssid = ssid->next;
 640                                 break;
 641                         }
 642                         ssid = ssid->next;
 643                 }
 644         }
 645
 646         if (scan_req != MANUAL_SCAN_REQ && wpa_s->conf->ap_scan == 2) {
 647                 wpa_s->connect_without_scan = NULL;
 648                 wpa_s->prev_scan_wildcard = 0;
 649                 wpa_supplicant_assoc_try(wpa_s, ssid);
 650                 return;
 651         } else if (wpa_s->conf->ap_scan == 2) {
 652                 /*
 653                  * User-initiated scan request in ap_scan == 2; scan with
 654                  * wildcard SSID.
 655                  */
 656                 ssid = NULL;
 657         } else {
 658                 struct wpa_ssid *start = ssid, *tssid;
 659                 int freqs_set = 0;
 660                 if (ssid == NULL && max_ssids > 1)
 661                         ssid = wpa_s->conf->ssid;
 662                 while (ssid) {
 663                         if (!wpas_network_disabled(wpa_s, ssid) &&
 664                             ssid->scan_ssid) {
 665                                 wpa_hexdump_ascii(MSG_DEBUG, "Scan SSID",
 666                                                   ssid->ssid, ssid->ssid_len);
 667                                 params.ssids[params.num_ssids].ssid =
 668                                         ssid->ssid;
 669                                 params.ssids[params.num_ssids].ssid_len =
 670                                         ssid->ssid_len;
 671                                 params.num_ssids++;
 672                                 if (params.num_ssids + 1 >= max_ssids)
 673                                         break;
 674                         }
 675                         ssid = ssid->next;
 676                         if (ssid == start)
 677                                 break;
 678                         if (ssid == NULL && max_ssids > 1 &&
 679                             start != wpa_s->conf->ssid)
 680                                 ssid = wpa_s->conf->ssid;
 681                 }
 682
 683                 for (tssid = wpa_s->conf->ssid; tssid; tssid = tssid->next) {
 684                         if (wpas_network_disabled(wpa_s, tssid))
 685                                 continue;
 686                         if ((params.freqs || !freqs_set) && tssid->scan_freq) {
 687                                 int_array_concat(&params.freqs,
 688                                                  tssid->scan_freq);
 689                         } else {
 690                                 os_free(params.freqs);
 691                                 params.freqs = NULL;
 692                         }
 693                         freqs_set = 1;
 694                 }
 695                 int_array_sort_unique(params.freqs);
 696         }
 697
 698         if (ssid && max_ssids == 1) {
 699                 /*
 700                  * If the driver is limited to 1 SSID at a time interleave
 701                  * wildcard SSID scans with specific SSID scans to avoid
 702                  * waiting a long time for a wildcard scan.
 703                  */
 704                 if (!wpa_s->prev_scan_wildcard) {
 705                         params.ssids[0].ssid = NULL;
 706                         params.ssids[0].ssid_len = 0;
 707                         wpa_s->prev_scan_wildcard = 1;
 708                         wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for "
 709                                 "wildcard SSID (Interleave with specific)");
 710                 } else {
 711                         wpa_s->prev_scan_ssid = ssid;
 712                         wpa_s->prev_scan_wildcard = 0;
 713                         wpa_dbg(wpa_s, MSG_DEBUG,
 714                                 "Starting AP scan for specific SSID: %s",
 715                                 wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
 716                 }
 717         } else if (ssid) {
 718                 /* max_ssids > 1 */
 719
 720                 wpa_s->prev_scan_ssid = ssid;
 721                 wpa_dbg(wpa_s, MSG_DEBUG, "Include wildcard SSID in "
 722                         "the scan request");
 723                 params.num_ssids++;
 724         } else {
 725                 wpa_s->prev_scan_ssid = WILDCARD_SSID_SCAN;
 726                 params.num_ssids++;
 727                 wpa_dbg(wpa_s, MSG_DEBUG, "Starting AP scan for wildcard "
 728                         "SSID");
 729         }
 730 #ifdef CONFIG_P2P
 731 ssid_list_set:
 732 #endif /* CONFIG_P2P */
 733
 734         wpa_supplicant_optimize_freqs(wpa_s, &params);
 735         extra_ie = wpa_supplicant_extra_ies(wpa_s);
 736
 737 #ifdef CONFIG_HS20
 738         if (wpa_s->conf->hs20 && wpabuf_resize(&extra_ie, 6) == 0)
 739                 wpas_hs20_add_indication(extra_ie);
 740 #endif /* CONFIG_HS20 */
 741
 742         if (params.freqs == NULL && wpa_s->next_scan_freqs) {
 743                 wpa_dbg(wpa_s, MSG_DEBUG, "Optimize scan based on previously "
 744                         "generated frequency list");
 745                 params.freqs = wpa_s->next_scan_freqs;
 746         } else
 747                 os_free(wpa_s->next_scan_freqs);
 748         wpa_s->next_scan_freqs = NULL;
 749
 750         params.filter_ssids = wpa_supplicant_build_filter_ssids(
 751                 wpa_s->conf, &params.num_filter_ssids);
 752         if (extra_ie) {
 753                 params.extra_ies = wpabuf_head(extra_ie);
 754                 params.extra_ies_len = wpabuf_len(extra_ie);
 755         }
 756
 757 #ifdef CONFIG_P2P
 758         if (wpa_s->p2p_in_provisioning ||
 759             (wpa_s->show_group_started && wpa_s->go_params)) {
 760                 /*
 761                  * The interface may not yet be in P2P mode, so we have to
 762                  * explicitly request P2P probe to disable CCK rates.
 763                  */
 764                 params.p2p_probe = 1;
 765         }
 766 #endif /* CONFIG_P2P */
 767
 768         scan_params = &params;
 769
 770 scan:
 771 #ifdef CONFIG_P2P
 772         /*
 773          * If the driver does not support multi-channel concurrency and a
 774          * virtual interface that shares the same radio with the wpa_s interface
 775          * is operating there may not be need to scan other channels apart from
 776          * the current operating channel on the other virtual interface. Filter
 777          * out other channels in case we are trying to find a connection for a
 778          * station interface when we are not configured to prefer station
 779          * connection and a concurrent operation is already in process.
 780          */
 781         if (wpa_s->scan_for_connection && scan_req == NORMAL_SCAN_REQ &&
 782             !scan_params->freqs && !params.freqs &&
 783             wpas_is_p2p_prioritized(wpa_s) &&
 784             !(wpa_s->drv_flags & WPA_DRIVER_FLAGS_MULTI_CHANNEL_CONCURRENT) &&
 785             wpa_s->p2p_group_interface == NOT_P2P_GROUP_INTERFACE &&
 786             non_p2p_network_enabled(wpa_s)) {
 787                 int freq = shared_vif_oper_freq(wpa_s);
 788                 if (freq > 0) {
 789                         wpa_dbg(wpa_s, MSG_DEBUG, "P2P: Scan only the current "
 790                                 "operating channel (%d MHz) since driver does "
 791                                 "not support multi-channel concurrency", freq);
 792                         params.freqs = os_zalloc(sizeof(int) * 2);
 793                         if (params.freqs)
 794                                 params.freqs[0] = freq;
 795                         scan_params->freqs = params.freqs;
 796                 }
 797         }
 798 #endif /* CONFIG_P2P */
 799
 800         ret = wpa_supplicant_trigger_scan(wpa_s, scan_params);
 801
 802         wpabuf_free(extra_ie);
 803         os_free(params.freqs);
 804         os_free(params.filter_ssids);
 805
 806         if (ret) {
 807                 wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate AP scan");
 808                 if (prev_state != wpa_s->wpa_state)
 809                         wpa_supplicant_set_state(wpa_s, prev_state);
 810                 /* Restore scan_req since we will try to scan again */
 811                 wpa_s->scan_req = scan_req;
 812                 wpa_supplicant_req_scan(wpa_s, 1, 0);
 813         } else {
 814                 wpa_s->scan_for_connection = 0;
 815         }
 816 }
 817
 818
 819 /**
 820  * wpa_supplicant_req_scan - Schedule a scan for neighboring access points
 821  * @wpa_s: Pointer to wpa_supplicant data
 822  * @sec: Number of seconds after which to scan
 823  * @usec: Number of microseconds after which to scan
 824  *
 825  * This function is used to schedule a scan for neighboring access points after
 826  * the specified time.
 827  */
 828 void wpa_supplicant_req_scan(struct wpa_supplicant *wpa_s, int sec, int usec)
 829 {
 830         /* If there's at least one network that should be specifically scanned
 831          * then don't cancel the scan and reschedule.  Some drivers do
 832          * background scanning which generates frequent scan results, and that
 833          * causes the specific SSID scan to get continually pushed back and
 834          * never happen, which causes hidden APs to never get probe-scanned.
 835          */
 836         if (eloop_is_timeout_registered(wpa_supplicant_scan, wpa_s, NULL) &&
 837             wpa_s->conf->ap_scan == 1) {
 838                 struct wpa_ssid *ssid = wpa_s->conf->ssid;
 839
 840                 while (ssid) {
 841                         if (!wpas_network_disabled(wpa_s, ssid) &&
 842                             ssid->scan_ssid)
 843                                 break;
 844                         ssid = ssid->next;
 845                 }
 846                 if (ssid) {
 847                         wpa_dbg(wpa_s, MSG_DEBUG, "Not rescheduling scan to "
 848                                 "ensure that specific SSID scans occur");
 849                         return;
 850                 }
 851         }
 852
 853         wpa_dbg(wpa_s, MSG_DEBUG, "Setting scan request: %d sec %d usec",
 854                 sec, usec);
 855         eloop_cancel_timeout(wpa_supplicant_scan, wpa_s, NULL);
 856         eloop_register_timeout(sec, usec, wpa_supplicant_scan, wpa_s, NULL);
 857 }
 858
 859
 860 /**
 861  * wpa_supplicant_delayed_sched_scan - Request a delayed scheduled scan
 862  * @wpa_s: Pointer to wpa_supplicant data
 863  * @sec: Number of seconds after which to scan
 864  * @usec: Number of microseconds after which to scan
 865  * Returns: 0 on success or -1 otherwise
 866  *
 867  * This function is used to schedule periodic scans for neighboring
 868  * access points after the specified time.
 869  */
 870 int wpa_supplicant_delayed_sched_scan(struct wpa_supplicant *wpa_s,
 871                                       int sec, int usec)
 872 {
 873         if (!wpa_s->sched_scan_supported)
 874                 return -1;
 875
 876         eloop_register_timeout(sec, usec,
 877                                wpa_supplicant_delayed_sched_scan_timeout,
 878                                wpa_s, NULL);
 879
 880         return 0;
 881 }
 882
 883
 884 /**
 885  * wpa_supplicant_req_sched_scan - Start a periodic scheduled scan
 886  * @wpa_s: Pointer to wpa_supplicant data
 887  * Returns: 0 is sched_scan was started or -1 otherwise
 888  *
 889  * This function is used to schedule periodic scans for neighboring
 890  * access points repeating the scan continuously.
 891  */
 892 int wpa_supplicant_req_sched_scan(struct wpa_supplicant *wpa_s)
 893 {
 894         struct wpa_driver_scan_params params;
 895         struct wpa_driver_scan_params *scan_params;
 896         enum wpa_states prev_state;
 897         struct wpa_ssid *ssid = NULL;
 898         struct wpabuf *extra_ie = NULL;
 899         int ret;
 900         unsigned int max_sched_scan_ssids;
 901         int wildcard = 0;
 902         int need_ssids;
 903
 904         if (!wpa_s->sched_scan_supported)
 905                 return -1;
 906
 907         if (wpa_s->max_sched_scan_ssids > WPAS_MAX_SCAN_SSIDS)
 908                 max_sched_scan_ssids = WPAS_MAX_SCAN_SSIDS;
 909         else
 910                 max_sched_scan_ssids = wpa_s->max_sched_scan_ssids;
 911         if (max_sched_scan_ssids < 1 || wpa_s->conf->disable_scan_offload)
 912                 return -1;
 913
 914         if (wpa_s->sched_scanning) {
 915                 wpa_dbg(wpa_s, MSG_DEBUG, "Already sched scanning");
 916                 return 0;
 917         }
 918
 919         need_ssids = 0;
 920         for (ssid = wpa_s->conf->ssid; ssid; ssid = ssid->next) {
 921                 if (!wpas_network_disabled(wpa_s, ssid) && !ssid->scan_ssid) {
 922                         /* Use wildcard SSID to find this network */
 923                         wildcard = 1;
 924                 } else if (!wpas_network_disabled(wpa_s, ssid) &&
 925                            ssid->ssid_len)
 926                         need_ssids++;
 927
 928 #ifdef CONFIG_WPS
 929                 if (!wpas_network_disabled(wpa_s, ssid) &&
 930                     ssid->key_mgmt == WPA_KEY_MGMT_WPS) {
 931                         /*
 932                          * Normal scan is more reliable and faster for WPS
 933                          * operations and since these are for short periods of
 934                          * time, the benefit of trying to use sched_scan would
 935                          * be limited.
 936                          */
 937                         wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of "
 938                                 "sched_scan for WPS");
 939                         return -1;
 940                 }
 941 #endif /* CONFIG_WPS */
 942         }
 943         if (wildcard)
 944                 need_ssids++;
 945
 946         if (wpa_s->normal_scans < 3 &&
 947             (need_ssids <= wpa_s->max_scan_ssids ||
 948              wpa_s->max_scan_ssids >= (int) max_sched_scan_ssids)) {
 949                 /*
 950                  * When normal scan can speed up operations, use that for the
 951                  * first operations before starting the sched_scan to allow
 952                  * user space sleep more. We do this only if the normal scan
 953                  * has functionality that is suitable for this or if the
 954                  * sched_scan does not have better support for multiple SSIDs.
 955                  */
 956                 wpa_dbg(wpa_s, MSG_DEBUG, "Use normal scan instead of "
 957                         "sched_scan for initial scans (normal_scans=%d)",
 958                         wpa_s->normal_scans);
 959                 return -1;
 960         }
 961
 962         os_memset(&params, 0, sizeof(params));
 963
 964         /* If we can't allocate space for the filters, we just don't filter */
 965         params.filter_ssids = os_zalloc(wpa_s->max_match_sets *
 966                                         sizeof(struct wpa_driver_scan_filter));
 967
 968         prev_state = wpa_s->wpa_state;
 969         if (wpa_s->wpa_state == WPA_DISCONNECTED ||
 970             wpa_s->wpa_state == WPA_INACTIVE)
 971                 wpa_supplicant_set_state(wpa_s, WPA_SCANNING);
 972
 973         if (wpa_s->autoscan_params != NULL) {
 974                 scan_params = wpa_s->autoscan_params;
 975                 goto scan;
 976         }
 977
 978         /* Find the starting point from which to continue scanning */
 979         ssid = wpa_s->conf->ssid;
 980         if (wpa_s->prev_sched_ssid) {
 981                 while (ssid) {
 982                         if (ssid == wpa_s->prev_sched_ssid) {
 983                                 ssid = ssid->next;
 984                                 break;
 985                         }
 986                         ssid = ssid->next;
 987                 }
 988         }
 989
 990         if (!ssid || !wpa_s->prev_sched_ssid) {
 991                 wpa_dbg(wpa_s, MSG_DEBUG, "Beginning of SSID list");
 992
 993                 if (wpa_s->sched_scan_interval == 0)
 994                         wpa_s->sched_scan_interval = 10;
 995                 wpa_s->sched_scan_timeout = max_sched_scan_ssids * 2;
 996                 wpa_s->first_sched_scan = 1;
 997                 ssid = wpa_s->conf->ssid;
 998                 wpa_s->prev_sched_ssid = ssid;
 999         }
1000
1001         if (wildcard) {
1002                 wpa_dbg(wpa_s, MSG_DEBUG, "Add wildcard SSID to sched_scan");
1003                 params.num_ssids++;
1004         }
1005
1006         while (ssid) {
1007                 if (wpas_network_disabled(wpa_s, ssid))
1008                         goto next;
1009
1010                 if (params.num_filter_ssids < wpa_s->max_match_sets &&
1011                     params.filter_ssids && ssid->ssid && ssid->ssid_len) {
1012                         wpa_dbg(wpa_s, MSG_DEBUG, "add to filter ssid: %s",
1013                                 wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
1014                         os_memcpy(params.filter_ssids[params.num_filter_ssids].ssid,
1015                                   ssid->ssid, ssid->ssid_len);
1016                         params.filter_ssids[params.num_filter_ssids].ssid_len =
1017                                 ssid->ssid_len;
1018                         params.num_filter_ssids++;
1019                 } else if (params.filter_ssids && ssid->ssid && ssid->ssid_len)
1020                 {
1021                         wpa_dbg(wpa_s, MSG_DEBUG, "Not enough room for SSID "
1022                                 "filter for sched_scan - drop filter");
1023                         os_free(params.filter_ssids);
1024                         params.filter_ssids = NULL;
1025                         params.num_filter_ssids = 0;
1026                 }
1027
1028                 if (ssid->scan_ssid && ssid->ssid && ssid->ssid_len) {
1029                         if (params.num_ssids == max_sched_scan_ssids)
1030                                 break; /* only room for broadcast SSID */
1031                         wpa_dbg(wpa_s, MSG_DEBUG,
1032                                 "add to active scan ssid: %s",
1033                                 wpa_ssid_txt(ssid->ssid, ssid->ssid_len));
1034                         params.ssids[params.num_ssids].ssid =
1035                                 ssid->ssid;
1036                         params.ssids[params.num_ssids].ssid_len =
1037                                 ssid->ssid_len;
1038                         params.num_ssids++;
1039                         if (params.num_ssids >= max_sched_scan_ssids) {
1040                                 wpa_s->prev_sched_ssid = ssid;
1041                                 do {
1042                                         ssid = ssid->next;
1043                                 } while (ssid &&
1044                                          (wpas_network_disabled(wpa_s, ssid) ||
1045                                           !ssid->scan_ssid));
1046                                 break;
1047                         }
1048                 }
1049
1050         next:
1051                 wpa_s->prev_sched_ssid = ssid;
1052                 ssid = ssid->next;
1053         }
1054
1055         if (params.num_filter_ssids == 0) {
1056                 os_free(params.filter_ssids);
1057                 params.filter_ssids = NULL;
1058         }
1059
1060         extra_ie = wpa_supplicant_extra_ies(wpa_s);
1061         if (extra_ie) {
1062                 params.extra_ies = wpabuf_head(extra_ie);
1063                 params.extra_ies_len = wpabuf_len(extra_ie);
1064         }
1065
1066         scan_params = &params;
1067
1068 scan:
1069         if (ssid || !wpa_s->first_sched_scan) {
1070                 wpa_dbg(wpa_s, MSG_DEBUG,
1071                         "Starting sched scan: interval %d timeout %d",
1072                         wpa_s->sched_scan_interval, wpa_s->sched_scan_timeout);
1073         } else {
1074                 wpa_dbg(wpa_s, MSG_DEBUG,
1075                         "Starting sched scan: interval %d (no timeout)",
1076                         wpa_s->sched_scan_interval);
1077         }
1078
1079         ret = wpa_supplicant_start_sched_scan(wpa_s, scan_params,
1080                                               wpa_s->sched_scan_interval);
1081         wpabuf_free(extra_ie);
1082         os_free(params.filter_ssids);
1083         if (ret) {
1084                 wpa_msg(wpa_s, MSG_WARNING, "Failed to initiate sched scan");
1085                 if (prev_state != wpa_s->wpa_state)
1086                         wpa_supplicant_set_state(wpa_s, prev_state);
1087                 return ret;
1088         }
1089
1090         /* If we have more SSIDs to scan, add a timeout so we scan them too */
1091         if (ssid || !wpa_s->first_sched_scan) {
1092                 wpa_s->sched_scan_timed_out = 0;
1093                 eloop_register_timeout(wpa_s->sched_scan_timeout, 0,
1094                                        wpa_supplicant_sched_scan_timeout,
1095                                        wpa_s, NULL);
1096                 wpa_s->first_sched_scan = 0;
1097                 wpa_s->sched_scan_timeout /= 2;
1098                 wpa_s->sched_scan_interval *= 2;
1099         }
1100
1101         return 0;
1102 }
1103
1104
1105 /**
1106  * wpa_supplicant_cancel_scan - Cancel a scheduled scan request
1107  * @wpa_s: Pointer to wpa_supplicant data
1108  *
1109  * This function is used to cancel a scan request scheduled with
1110  * wpa_supplicant_req_scan().
1111  */
1112 void wpa_supplicant_cancel_scan(struct wpa_supplicant *wpa_s)
1113 {
1114         wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling scan request");
1115         eloop_cancel_timeout(wpa_supplicant_scan, wpa_s, NULL);
1116 }
1117
1118
1119 /**
1120  * wpa_supplicant_cancel_sched_scan - Stop running scheduled scans
1121  * @wpa_s: Pointer to wpa_supplicant data
1122  *
1123  * This function is used to stop a periodic scheduled scan.
1124  */
1125 void wpa_supplicant_cancel_sched_scan(struct wpa_supplicant *wpa_s)
1126 {
1127         if (!wpa_s->sched_scanning)
1128                 return;
1129
1130         wpa_dbg(wpa_s, MSG_DEBUG, "Cancelling sched scan");
1131         eloop_cancel_timeout(wpa_supplicant_sched_scan_timeout, wpa_s, NULL);
1132         wpa_supplicant_stop_sched_scan(wpa_s);
1133 }
1134
1135
1136 /**
1137  * wpa_supplicant_notify_scanning - Indicate possible scan state change
1138  * @wpa_s: Pointer to wpa_supplicant data
1139  * @scanning: Whether scanning is currently in progress
1140  *
1141  * This function is to generate scanning notifycations. It is called whenever
1142  * there may have been a change in scanning (scan started, completed, stopped).
1143  * wpas_notify_scanning() is called whenever the scanning state changed from the
1144  * previously notified state.
1145  */
1146 void wpa_supplicant_notify_scanning(struct wpa_supplicant *wpa_s,
1147                                     int scanning)
1148 {
1149         if (wpa_s->scanning != scanning) {
1150                 wpa_s->scanning = scanning;
1151                 wpas_notify_scanning(wpa_s);
1152         }
1153 }
1154
1155
1156 static int wpa_scan_get_max_rate(const struct wpa_scan_res *res)
1157 {
1158         int rate = 0;
1159         const u8 *ie;
1160         int i;
1161
1162         ie = wpa_scan_get_ie(res, WLAN_EID_SUPP_RATES);
1163         for (i = 0; ie && i < ie[1]; i++) {
1164                 if ((ie[i + 2] & 0x7f) > rate)
1165                         rate = ie[i + 2] & 0x7f;
1166         }
1167
1168         ie = wpa_scan_get_ie(res, WLAN_EID_EXT_SUPP_RATES);
1169         for (i = 0; ie && i < ie[1]; i++) {
1170                 if ((ie[i + 2] & 0x7f) > rate)
1171                         rate = ie[i + 2] & 0x7f;
1172         }
1173
1174         return rate;
1175 }
1176
1177
1178 /**
1179  * wpa_scan_get_ie - Fetch a specified information element from a scan result
1180  * @res: Scan result entry
1181  * @ie: Information element identitifier (WLAN_EID_*)
1182  * Returns: Pointer to the information element (id field) or %NULL if not found
1183  *
1184  * This function returns the first matching information element in the scan
1185  * result.
1186  */
1187 const u8 * wpa_scan_get_ie(const struct wpa_scan_res *res, u8 ie)
1188 {
1189         const u8 *end, *pos;
1190
1191         pos = (const u8 *) (res + 1);
1192         end = pos + res->ie_len;
1193
1194         while (pos + 1 < end) {
1195                 if (pos + 2 + pos[1] > end)
1196                         break;
1197                 if (pos[0] == ie)
1198                         return pos;
1199                 pos += 2 + pos[1];
1200         }
1201
1202         return NULL;
1203 }
1204
1205
1206 /**
1207  * wpa_scan_get_vendor_ie - Fetch vendor information element from a scan result
1208  * @res: Scan result entry
1209  * @vendor_type: Vendor type (four octets starting the IE payload)
1210  * Returns: Pointer to the information element (id field) or %NULL if not found
1211  *
1212  * This function returns the first matching information element in the scan
1213  * result.
1214  */
1215 const u8 * wpa_scan_get_vendor_ie(const struct wpa_scan_res *res,
1216                                   u32 vendor_type)
1217 {
1218         const u8 *end, *pos;
1219
1220         pos = (const u8 *) (res + 1);
1221         end = pos + res->ie_len;
1222
1223         while (pos + 1 < end) {
1224                 if (pos + 2 + pos[1] > end)
1225                         break;
1226                 if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
1227                     vendor_type == WPA_GET_BE32(&pos[2]))
1228                         return pos;
1229                 pos += 2 + pos[1];
1230         }
1231
1232         return NULL;
1233 }
1234
1235
1236 /**
1237  * wpa_scan_get_vendor_ie_multi - Fetch vendor IE data from a scan result
1238  * @res: Scan result entry
1239  * @vendor_type: Vendor type (four octets starting the IE payload)
1240  * Returns: Pointer to the information element payload or %NULL if not found
1241  *
1242  * This function returns concatenated payload of possibly fragmented vendor
1243  * specific information elements in the scan result. The caller is responsible
1244  * for freeing the returned buffer.
1245  */
1246 struct wpabuf * wpa_scan_get_vendor_ie_multi(const struct wpa_scan_res *res,
1247                                              u32 vendor_type)
1248 {
1249         struct wpabuf *buf;
1250         const u8 *end, *pos;
1251
1252         buf = wpabuf_alloc(res->ie_len);
1253         if (buf == NULL)
1254                 return NULL;
1255
1256         pos = (const u8 *) (res + 1);
1257         end = pos + res->ie_len;
1258
1259         while (pos + 1 < end) {
1260                 if (pos + 2 + pos[1] > end)
1261                         break;
1262                 if (pos[0] == WLAN_EID_VENDOR_SPECIFIC && pos[1] >= 4 &&
1263                     vendor_type == WPA_GET_BE32(&pos[2]))
1264                         wpabuf_put_data(buf, pos + 2 + 4, pos[1] - 4);
1265                 pos += 2 + pos[1];
1266         }
1267
1268         if (wpabuf_len(buf) == 0) {
1269                 wpabuf_free(buf);
1270                 buf = NULL;
1271         }
1272
1273         return buf;
1274 }
1275
1276
1277 /*
1278  * Channels with a great SNR can operate at full rate. What is a great SNR?
1279  * This doc https://supportforums.cisco.com/docs/DOC-12954 says, "the general
1280  * rule of thumb is that any SNR above 20 is good." This one
1281  * http://www.cisco.com/en/US/tech/tk722/tk809/technologies_q_and_a_item09186a00805e9a96.shtml#qa23
1282  * recommends 25 as a minimum SNR for 54 Mbps data rate. 30 is chosen here as a
1283  * conservative value.
1284  */
1285 #define GREAT_SNR 30
1286
1287 /* Compare function for sorting scan results. Return >0 if @b is considered
1288  * better. */
1289 static int wpa_scan_result_compar(const void *a, const void *b)
1290 {
1291 #define IS_5GHZ(n) (n > 4000)
1292 #define MIN(a,b) a < b ? a : b
1293         struct wpa_scan_res **_wa = (void *) a;
1294         struct wpa_scan_res **_wb = (void *) b;
1295         struct wpa_scan_res *wa = *_wa;
1296         struct wpa_scan_res *wb = *_wb;
1297         int wpa_a, wpa_b, maxrate_a, maxrate_b;
1298         int snr_a, snr_b;
1299
1300         /* WPA/WPA2 support preferred */
1301         wpa_a = wpa_scan_get_vendor_ie(wa, WPA_IE_VENDOR_TYPE) != NULL ||
1302                 wpa_scan_get_ie(wa, WLAN_EID_RSN) != NULL;
1303         wpa_b = wpa_scan_get_vendor_ie(wb, WPA_IE_VENDOR_TYPE) != NULL ||
1304                 wpa_scan_get_ie(wb, WLAN_EID_RSN) != NULL;
1305
1306         if (wpa_b && !wpa_a)
1307                 return 1;
1308         if (!wpa_b && wpa_a)
1309                 return -1;
1310
1311         /* privacy support preferred */
1312         if ((wa->caps & IEEE80211_CAP_PRIVACY) == 0 &&
1313             (wb->caps & IEEE80211_CAP_PRIVACY))
1314                 return 1;
1315         if ((wa->caps & IEEE80211_CAP_PRIVACY) &&
1316             (wb->caps & IEEE80211_CAP_PRIVACY) == 0)
1317                 return -1;
1318
1319         if ((wa->flags & wb->flags & WPA_SCAN_LEVEL_DBM) &&
1320             !((wa->flags | wb->flags) & WPA_SCAN_NOISE_INVALID)) {
1321                 snr_a = MIN(wa->level - wa->noise, GREAT_SNR);
1322                 snr_b = MIN(wb->level - wb->noise, GREAT_SNR);
1323         } else {
1324                 /* Not suitable information to calculate SNR, so use level */
1325                 snr_a = wa->level;
1326                 snr_b = wb->level;
1327         }
1328
1329         /* best/max rate preferred if SNR close enough */
1330         if ((snr_a && snr_b && abs(snr_b - snr_a) < 5) ||
1331             (wa->qual && wb->qual && abs(wb->qual - wa->qual) < 10)) {
1332                 maxrate_a = wpa_scan_get_max_rate(wa);
1333                 maxrate_b = wpa_scan_get_max_rate(wb);
1334                 if (maxrate_a != maxrate_b)
1335                         return maxrate_b - maxrate_a;
1336                 if (IS_5GHZ(wa->freq) ^ IS_5GHZ(wb->freq))
1337                         return IS_5GHZ(wa->freq) ? -1 : 1;
1338         }
1339
1340         /* use freq for channel preference */
1341
1342         /* all things being equal, use SNR; if SNRs are
1343          * identical, use quality values since some drivers may only report
1344          * that value and leave the signal level zero */
1345         if (snr_b == snr_a)
1346                 return wb->qual - wa->qual;
1347         return snr_b - snr_a;
1348 #undef MIN
1349 #undef IS_5GHZ
1350 }
1351
1352
1353 #ifdef CONFIG_WPS
1354 /* Compare function for sorting scan results when searching a WPS AP for
1355  * provisioning. Return >0 if @b is considered better. */
1356 static int wpa_scan_result_wps_compar(const void *a, const void *b)
1357 {
1358         struct wpa_scan_res **_wa = (void *) a;
1359         struct wpa_scan_res **_wb = (void *) b;
1360         struct wpa_scan_res *wa = *_wa;
1361         struct wpa_scan_res *wb = *_wb;
1362         int uses_wps_a, uses_wps_b;
1363         struct wpabuf *wps_a, *wps_b;
1364         int res;
1365
1366         /* Optimization - check WPS IE existence before allocated memory and
1367          * doing full reassembly. */
1368         uses_wps_a = wpa_scan_get_vendor_ie(wa, WPS_IE_VENDOR_TYPE) != NULL;
1369         uses_wps_b = wpa_scan_get_vendor_ie(wb, WPS_IE_VENDOR_TYPE) != NULL;
1370         if (uses_wps_a && !uses_wps_b)
1371                 return -1;
1372         if (!uses_wps_a && uses_wps_b)
1373                 return 1;
1374
1375         if (uses_wps_a && uses_wps_b) {
1376                 wps_a = wpa_scan_get_vendor_ie_multi(wa, WPS_IE_VENDOR_TYPE);
1377                 wps_b = wpa_scan_get_vendor_ie_multi(wb, WPS_IE_VENDOR_TYPE);
1378                 res = wps_ap_priority_compar(wps_a, wps_b);
1379                 wpabuf_free(wps_a);
1380                 wpabuf_free(wps_b);
1381                 if (res)
1382                         return res;
1383         }
1384
1385         /*
1386          * Do not use current AP security policy as a sorting criteria during
1387          * WPS provisioning step since the AP may get reconfigured at the
1388          * completion of provisioning.
1389          */
1390
1391         /* all things being equal, use signal level; if signal levels are
1392          * identical, use quality values since some drivers may only report
1393          * that value and leave the signal level zero */
1394         if (wb->level == wa->level)
1395                 return wb->qual - wa->qual;
1396         return wb->level - wa->level;
1397 }
1398 #endif /* CONFIG_WPS */
1399
1400
1401 static void dump_scan_res(struct wpa_scan_results *scan_res)
1402 {
1403 #ifndef CONFIG_NO_STDOUT_DEBUG
1404         size_t i;
1405
1406         if (scan_res->res == NULL || scan_res->num == 0)
1407                 return;
1408
1409         wpa_printf(MSG_EXCESSIVE, "Sorted scan results");
1410
1411         for (i = 0; i < scan_res->num; i++) {
1412                 struct wpa_scan_res *r = scan_res->res[i];
1413                 u8 *pos;
1414                 if ((r->flags & (WPA_SCAN_LEVEL_DBM | WPA_SCAN_NOISE_INVALID))
1415                     == WPA_SCAN_LEVEL_DBM) {
1416                         int snr = r->level - r->noise;
1417                         wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
1418                                    "noise=%d level=%d snr=%d%s flags=0x%x",
1419                                    MAC2STR(r->bssid), r->freq, r->qual,
1420                                    r->noise, r->level, snr,
1421                                    snr >= GREAT_SNR ? "*" : "", r->flags);
1422                 } else {
1423                         wpa_printf(MSG_EXCESSIVE, MACSTR " freq=%d qual=%d "
1424                                    "noise=%d level=%d flags=0x%x",
1425                                    MAC2STR(r->bssid), r->freq, r->qual,
1426                                    r->noise, r->level, r->flags);
1427                 }
1428                 pos = (u8 *) (r + 1);
1429                 if (r->ie_len)
1430                         wpa_hexdump(MSG_EXCESSIVE, "IEs", pos, r->ie_len);
1431                 pos += r->ie_len;
1432                 if (r->beacon_ie_len)
1433                         wpa_hexdump(MSG_EXCESSIVE, "Beacon IEs",
1434                                     pos, r->beacon_ie_len);
1435         }
1436 #endif /* CONFIG_NO_STDOUT_DEBUG */
1437 }
1438
1439
1440 /**
1441  * wpa_supplicant_filter_bssid_match - Is the specified BSSID allowed
1442  * @wpa_s: Pointer to wpa_supplicant data
1443  * @bssid: BSSID to check
1444  * Returns: 0 if the BSSID is filtered or 1 if not
1445  *
1446  * This function is used to filter out specific BSSIDs from scan reslts mainly
1447  * for testing purposes (SET bssid_filter ctrl_iface command).
1448  */
1449 int wpa_supplicant_filter_bssid_match(struct wpa_supplicant *wpa_s,
1450                                       const u8 *bssid)
1451 {
1452         size_t i;
1453
1454         if (wpa_s->bssid_filter == NULL)
1455                 return 1;
1456
1457         for (i = 0; i < wpa_s->bssid_filter_count; i++) {
1458                 if (os_memcmp(wpa_s->bssid_filter + i * ETH_ALEN, bssid,
1459                               ETH_ALEN) == 0)
1460                         return 1;
1461         }
1462
1463         return 0;
1464 }
1465
1466
1467 static void filter_scan_res(struct wpa_supplicant *wpa_s,
1468                             struct wpa_scan_results *res)
1469 {
1470         size_t i, j;
1471
1472         if (wpa_s->bssid_filter == NULL)
1473                 return;
1474
1475         for (i = 0, j = 0; i < res->num; i++) {
1476                 if (wpa_supplicant_filter_bssid_match(wpa_s,
1477                                                       res->res[i]->bssid)) {
1478                         res->res[j++] = res->res[i];
1479                 } else {
1480                         os_free(res->res[i]);
1481                         res->res[i] = NULL;
1482                 }
1483         }
1484
1485         if (res->num != j) {
1486                 wpa_printf(MSG_DEBUG, "Filtered out %d scan results",
1487                            (int) (res->num - j));
1488                 res->num = j;
1489         }
1490 }
1491
1492
1493 /**
1494  * wpa_supplicant_get_scan_results - Get scan results
1495  * @wpa_s: Pointer to wpa_supplicant data
1496  * @info: Information about what was scanned or %NULL if not available
1497  * @new_scan: Whether a new scan was performed
1498  * Returns: Scan results, %NULL on failure
1499  *
1500  * This function request the current scan results from the driver and updates
1501  * the local BSS list wpa_s->bss. The caller is responsible for freeing the
1502  * results with wpa_scan_results_free().
1503  */
1504 struct wpa_scan_results *
1505 wpa_supplicant_get_scan_results(struct wpa_supplicant *wpa_s,
1506                                 struct scan_info *info, int new_scan)
1507 {
1508         struct wpa_scan_results *scan_res;
1509         size_t i;
1510         int (*compar)(const void *, const void *) = wpa_scan_result_compar;
1511
1512         scan_res = wpa_drv_get_scan_results2(wpa_s);
1513         if (scan_res == NULL) {
1514                 wpa_dbg(wpa_s, MSG_DEBUG, "Failed to get scan results");
1515                 return NULL;
1516         }
1517         filter_scan_res(wpa_s, scan_res);
1518
1519 #ifdef CONFIG_WPS
1520         if (wpas_wps_in_progress(wpa_s)) {
1521                 wpa_dbg(wpa_s, MSG_DEBUG, "WPS: Order scan results with WPS "
1522                         "provisioning rules");
1523                 compar = wpa_scan_result_wps_compar;
1524         }
1525 #endif /* CONFIG_WPS */
1526
1527         qsort(scan_res->res, scan_res->num, sizeof(struct wpa_scan_res *),
1528               compar);
1529         dump_scan_res(scan_res);
1530
1531         wpa_bss_update_start(wpa_s);
1532         for (i = 0; i < scan_res->num; i++)
1533                 wpa_bss_update_scan_res(wpa_s, scan_res->res[i]);
1534         wpa_bss_update_end(wpa_s, info, new_scan);
1535
1536         return scan_res;
1537 }
1538
1539
1540 /**
1541  * wpa_supplicant_update_scan_results - Update scan results from the driver
1542  * @wpa_s: Pointer to wpa_supplicant data
1543  * Returns: 0 on success, -1 on failure
1544  *
1545  * This function updates the BSS table within wpa_supplicant based on the
1546  * currently available scan results from the driver without requesting a new
1547  * scan. This is used in cases where the driver indicates an association
1548  * (including roaming within ESS) and wpa_supplicant does not yet have the
1549  * needed information to complete the connection (e.g., to perform validation
1550  * steps in 4-way handshake).
1551  */
1552 int wpa_supplicant_update_scan_results(struct wpa_supplicant *wpa_s)
1553 {
1554         struct wpa_scan_results *scan_res;
1555         scan_res = wpa_supplicant_get_scan_results(wpa_s, NULL, 0);
1556         if (scan_res == NULL)
1557                 return -1;
1558         wpa_scan_results_free(scan_res);
1559
1560         return 0;
1561 }