- Copy stable/10 (r259064) to releng/10.0 as part of the

[FreeBSD/releng/10.0.git] / etc / defaults / rc.conf

#!/bin/sh

# This is rc.conf - a file full of useful variables that you can set
# to change the default startup behavior of your system.  You should
# not edit this file!  Put any overrides into one of the ${rc_conf_files}
# instead and you will be able to update these defaults later without
# spamming your local configuration information.
#
# The ${rc_conf_files} files should only contain values which override
# values set in this file.  This eases the upgrade path when defaults
# are changed and new features are added.
#
# All arguments must be in double or single quotes.
#
# For a more detailed explanation of all the rc.conf variables, please
# refer to the rc.conf(5) manual page.
#
# $FreeBSD$

##############################################################
###  Important initial Boot-time options  ####################
##############################################################

rc_debug="NO"           # Set to YES to enable debugging output from rc.d
rc_info="NO"            # Enables display of informational messages at boot.
rc_startmsgs="YES"      # Show "Starting foo:" messages at boot
rcshutdown_timeout="90" # Seconds to wait before terminating rc.shutdown
early_late_divider="FILESYSTEMS"        # Script that separates early/late
                        # stages of the boot process.  Make sure you know
                        # the ramifications if you change this.
                        # See rc.conf(5) for more details.
always_force_depends="NO"       # Set to check that indicated dependencies are
                                # running during boot (can increase boot time).

apm_enable="NO"         # Set to YES to enable APM BIOS functions (or NO).
apmd_enable="NO"        # Run apmd to handle APM event from userland.
apmd_flags=""           # Flags to apmd (if enabled).
ddb_enable="NO"         # Set to YES to load ddb scripts at boot.
ddb_config="/etc/ddb.conf"      # ddb(8) config file.
devd_enable="YES"       # Run devd, to trigger programs on device tree changes.
devd_flags=""           # Additional flags for devd(8).
#kld_list=""            # Kernel modules to load after local disks are mounted
kldxref_enable="NO"     # Build linker.hints files with kldxref(8).
kldxref_clobber="NO"    # Overwrite old linker.hints at boot.
kldxref_module_path=""  # Override kern.module_path. A ';'-delimited list.
powerd_enable="NO"      # Run powerd to lower our power usage.
powerd_flags=""         # Flags to powerd (if enabled).
tmpmfs="AUTO"           # Set to YES to always create an mfs /tmp, NO to never
tmpsize="20m"           # Size of mfs /tmp if created
tmpmfs_flags="-S"       # Extra mdmfs options for the mfs /tmp
varmfs="AUTO"           # Set to YES to always create an mfs /var, NO to never
varsize="32m"           # Size of mfs /var if created
varmfs_flags="-S"       # Extra mount options for the mfs /var
populate_var="AUTO"     # Set to YES to always (re)populate /var, NO to never
cleanvar_enable="YES"   # Clean the /var directory
local_startup="/usr/local/etc/rc.d" # startup script dirs.
script_name_sep=" "     # Change if your startup scripts' names contain spaces
rc_conf_files="/etc/rc.conf /etc/rc.conf.local"

# ZFS support
zfs_enable="NO"         # Set to YES to automatically mount ZFS file systems

gptboot_enable="YES"    # GPT boot success/failure reporting.

# Experimental - test before enabling
gbde_autoattach_all="NO" # YES automatically mounts gbde devices from fstab
gbde_devices="NO"       # Devices to automatically attach (list, or AUTO)
gbde_attach_attempts="3" # Number of times to attempt attaching gbde devices
gbde_lockdir="/etc"     # Where to look for gbde lockfiles

# GELI disk encryption configuration.
geli_devices=""         # List of devices to automatically attach in addition to
                        # GELI devices listed in /etc/fstab.
geli_tries=""           # Number of times to attempt attaching geli device.
                        # If empty, kern.geom.eli.tries will be used.
geli_default_flags=""   # Default flags for geli(8).
geli_autodetach="YES"   # Automatically detach on last close.
                        # Providers are marked as such when all file systems are
                        # mounted.
# Example use.
#geli_devices="da1 mirror/home"
#geli_da1_flags="-p -k /etc/geli/da1.keys"
#geli_da1_autodetach="NO"
#geli_mirror_home_flags="-k /etc/geli/home.keys"

root_rw_mount="YES"     # Set to NO to inhibit remounting root read-write.
fsck_y_enable="NO"      # Set to YES to do fsck -y if the initial preen fails.
fsck_y_flags=""         # Additional flags for fsck -y
background_fsck="YES"   # Attempt to run fsck in the background where possible.
background_fsck_delay="60" # Time to wait (seconds) before starting the fsck.
netfs_types="nfs:NFS oldnfs:OLDNFS smbfs:SMB" # Net filesystems.
extra_netfs_types="NO"  # List of network extra filesystem types for delayed
                        # mount at startup (or NO).

##############################################################
###  Network configuration sub-section  ######################
##############################################################

### Basic network and firewall/security options: ###
hostname=""                     # Set this!
hostid_enable="YES"             # Set host UUID.
hostid_file="/etc/hostid"       # File with hostuuid.
nisdomainname="NO"              # Set to NIS domain if using NIS (or NO).
dhclient_program="/sbin/dhclient"       # Path to dhcp client program.
dhclient_flags=""               # Extra flags to pass to dhcp client.
#dhclient_flags_fxp0=""         # Extra dhclient flags for fxp0 only
background_dhclient="NO"        # Start dhcp client in the background.
#background_dhclient_fxp0="YES" # Start dhcp client on fxp0 in the background.
synchronous_dhclient="NO"       # Start dhclient directly on configured
                                # interfaces during startup.
defaultroute_delay="30"         # Time to wait for a default route on a DHCP interface.
defaultroute_carrier_delay="5"  # Time to wait for carrier while waiting for a default route.
wpa_supplicant_program="/usr/sbin/wpa_supplicant"
wpa_supplicant_flags="-s"       # Extra flags to pass to wpa_supplicant
wpa_supplicant_conf_file="/etc/wpa_supplicant.conf"
#
firewall_enable="NO"            # Set to YES to enable firewall functionality
firewall_script="/etc/rc.firewall" # Which script to run to set up the firewall
firewall_type="UNKNOWN"         # Firewall type (see /etc/rc.firewall)
firewall_quiet="NO"             # Set to YES to suppress rule display
firewall_logging="NO"           # Set to YES to enable events logging
firewall_logif="NO"             # Set to YES to create logging-pseudo interface
firewall_flags=""               # Flags passed to ipfw when type is a file
firewall_coscripts=""           # List of executables/scripts to run after
                                # firewall starts/stops
firewall_client_net="192.0.2.0/24" # IPv4 Network address for "client"
                                # firewall.
#firewall_client_net_ipv6="2001:db8:2:1::/64" # IPv6 network prefix for
                                # "client" firewall.
firewall_simple_iif="ed1"       # Inside network interface for "simple"
                                # firewall.
firewall_simple_inet="192.0.2.16/28" # Inside network address for "simple"
                                # firewall.
firewall_simple_oif="ed0"       # Outside network interface for "simple"
                                # firewall.
firewall_simple_onet="192.0.2.0/28" # Outside network address for "simple"
                                # firewall.
#firewall_simple_iif_ipv6="ed1" # Inside IPv6 network interface for "simple"
                                # firewall.
#firewall_simple_inet_ipv6="2001:db8:2:800::/56" # Inside IPv6 network prefix
                                # for "simple" firewall.
#firewall_simple_oif_ipv6="ed0" # Outside IPv6 network interface for "simple"
                                # firewall.
#firewall_simple_onet_ipv6="2001:db8:2:0::/56" # Outside IPv6 network prefix
                                # for "simple" firewall.
firewall_myservices=""          # List of TCP ports on which this host
                                # offers services for "workstation" firewall.
firewall_allowservices=""       # List of IPs which have access to
                                # $firewall_myservices for "workstation"
                                # firewall.
firewall_trusted=""             # List of IPs which have full access to this
                                # host for "workstation" firewall.
firewall_logdeny="NO"           # Set to YES to log default denied incoming
                                # packets for "workstation" firewall.
firewall_nologports="135-139,445 1026,1027 1433,1434" # List of TCP/UDP ports
                                # for which denied incoming packets are not
                                # logged for "workstation" firewall.
firewall_nat_enable="NO"        # Enable kernel NAT (if firewall_enable == YES)
firewall_nat_interface=""       # Public interface or IPaddress to use
firewall_nat_flags=""           # Additional configuration parameters
dummynet_enable="NO"            # Load the dummynet(4) module
ip_portrange_first="NO"         # Set first dynamically allocated port
ip_portrange_last="NO"          # Set last dynamically allocated port
ike_enable="NO"                 # Enable IKE daemon (usually racoon or isakmpd)
ike_program="/usr/local/sbin/isakmpd"   # Path to IKE daemon
ike_flags=""                    # Additional flags for IKE daemon
ipsec_enable="NO"               # Set to YES to run setkey on ipsec_file
ipsec_file="/etc/ipsec.conf"    # Name of config file for setkey
natd_program="/sbin/natd"       # path to natd, if you want a different one.
natd_enable="NO"                # Enable natd (if firewall_enable == YES).
natd_interface=""               # Public interface or IPaddress to use.
natd_flags=""                   # Additional flags for natd.
ipfilter_enable="NO"            # Set to YES to enable ipfilter functionality
ipfilter_program="/sbin/ipf"    # where the ipfilter program lives
ipfilter_rules="/etc/ipf.rules" # rules definition file for ipfilter, see
                                # /usr/src/contrib/ipfilter/rules for examples
ipfilter_flags=""               # additional flags for ipfilter
ipnat_enable="NO"               # Set to YES to enable ipnat functionality
ipnat_program="/sbin/ipnat"     # where the ipnat program lives
ipnat_rules="/etc/ipnat.rules"  # rules definition file for ipnat
ipnat_flags=""                  # additional flags for ipnat
ipmon_enable="NO"               # Set to YES for ipmon; needs ipfilter or ipnat
ipmon_program="/sbin/ipmon"     # where the ipfilter monitor program lives
ipmon_flags="-Ds"               # typically "-Ds" or "-D /var/log/ipflog"
ipfs_enable="NO"                # Set to YES to enable saving and restoring
                                # of state tables at shutdown and boot
ipfs_program="/sbin/ipfs"       # where the ipfs program lives
ipfs_flags=""                   # additional flags for ipfs
pf_enable="NO"                  # Set to YES to enable packet filter (pf)
pf_rules="/etc/pf.conf"         # rules definition file for pf
pf_program="/sbin/pfctl"        # where the pfctl program lives
pf_flags=""                     # additional flags for pfctl
pflog_enable="NO"               # Set to YES to enable packet filter logging
pflog_logfile="/var/log/pflog"  # where pflogd should store the logfile
pflog_program="/sbin/pflogd"    # where the pflogd program lives
pflog_flags=""                  # additional flags for pflogd
ftpproxy_enable="NO"            # Set to YES to enable ftp-proxy(8) for pf
ftpproxy_flags=""               # additional flags for ftp-proxy(8)
pfsync_enable="NO"              # Expose pf state to other hosts for syncing
pfsync_syncdev=""               # Interface for pfsync to work through
pfsync_syncpeer=""              # IP address of pfsync peer host
pfsync_ifconfig=""              # Additional options to ifconfig(8) for pfsync
tcp_extensions="YES"            # Set to NO to turn off RFC1323 extensions.
log_in_vain="0"                 # >=1 to log connects to ports w/o listeners.
tcp_keepalive="YES"             # Enable stale TCP connection timeout (or NO).
tcp_drop_synfin="NO"            # Set to YES to drop TCP packets with SYN+FIN
                                # NOTE: this violates the TCP specification
icmp_drop_redirect="NO"         # Set to YES to ignore ICMP REDIRECT packets
icmp_log_redirect="NO"          # Set to YES to log ICMP REDIRECT packets
network_interfaces="auto"       # List of network interfaces (or "auto").
cloned_interfaces=""            # List of cloned network interfaces to create.
#cloned_interfaces="gif0 gif1 gif2 gif3" # Pre-cloning GENERIC config.
#ifconfig_lo0="inet 127.0.0.1"  # default loopback device configuration.
#ifconfig_lo0_alias0="inet 127.0.0.254 netmask 0xffffffff" # Sample alias entry.
#ifconfig_ed0_ipx="ipx 0x00010010"      # Sample IPX address family entry.
#ifconfig_ed0_ipv6="inet6 2001:db8:1::1 prefixlen 64" # Sample IPv6 addr entry
#ifconfig_ed0_alias0="inet6 2001:db8:2::1 prefixlen 64" # Sample IPv6 alias
#ifconfig_fxp0_name="net0"      # Change interface name from fxp0 to net0.
#vlans_fxp0="101 vlan0"         # vlan(4) interfaces for fxp0 device
#create_args_vlan0="vlan 102"   # vlan tag for vlan0 device
#wlans_ath0="wlan0"             # wlan(4) interfaces for ath0 device
#wlandebug_wlan0="scan+auth+assoc"      # Set debug flags with wlanddebug(8)
#ipv4_addrs_fxp0="192.168.0.1/24 192.168.1.1-5/28" # example IPv4 address entry.
#
#autobridge_interfaces="bridge0"        # List of bridges to check
#autobridge_bridge0="tap* vlan0"        # Interface glob to automatically add to the bridge
#
# If you have any sppp(4) interfaces above, you might also want to set
# the following parameters.  Refer to spppcontrol(8) for their meaning.
sppp_interfaces=""              # List of sppp interfaces.
#sppp_interfaces="...0"         # example: sppp over ...
#spppconfig_...0="authproto=chap myauthname=foo myauthsecret='top secret' hisauthname=some-gw hisauthsecret='another secret'"
gif_interfaces=""               # List of GIF tunnels.
#gif_interfaces="gif0 gif1"     # Examples typically for a router.
                                # Choose correct tunnel addrs.
#gifconfig_gif0="10.1.1.1 10.1.2.1"     # Examples typically for a router.
#gifconfig_gif1="10.1.1.2 10.1.2.2"     # Examples typically for a router.
fec_interfaces=""               # List of Fast EtherChannels.
#fec_interfaces="fec0 fec1"
#fecconfig_fec0="fxp0 dc0"      # Examples typically for two NICs
#fecconfig_fec1="em0 em1 bge0 bge1"     # Examples typically for four NICs

# User ppp configuration.
ppp_enable="NO"         # Start user-ppp (or NO).
ppp_program="/usr/sbin/ppp"     # Path to user-ppp program.
ppp_mode="auto"         # Choice of "auto", "ddial", "direct" or "dedicated".
                        # For details see man page for ppp(8). Default is auto.
ppp_nat="YES"           # Use PPP's internal network address translation or NO.
ppp_profile="papchap"   # Which profile to use from /etc/ppp/ppp.conf.
ppp_user="root"         # Which user to run ppp as

# Start multiple instances of ppp at boot time
#ppp_profile="profile1 profile2 profile3"       # Which profiles to use
#ppp_profile1_mode="ddial"      # Override ppp mode for profile1
#ppp_profile2_nat="NO"          # Override nat mode for profile2
# profile3 uses default ppp_mode and ppp_nat

### Network daemon (miscellaneous) ###
hostapd_enable="NO"             # Run hostap daemon.
syslogd_enable="YES"            # Run syslog daemon (or NO).
syslogd_program="/usr/sbin/syslogd" # path to syslogd, if you want a different one.
syslogd_flags="-s"              # Flags to syslogd (if enabled).
altlog_proglist=""              # List of chrooted applicatioins in /var
inetd_enable="NO"               # Run the network daemon dispatcher (YES/NO).
inetd_program="/usr/sbin/inetd" # path to inetd, if you want a different one.
inetd_flags="-wW -C 60"         # Optional flags to inetd
iscsid_enable="NO"              # iSCSI initiator daemon.
iscsictl_enable="NO"            # iSCSI initiator autostart.
iscsictl_flags="-Aa"            # Optional flags to iscsictl.
hastd_enable="NO"               # Run the HAST daemon (YES/NO).
hastd_program="/sbin/hastd"     # path to hastd, if you want a different one.
hastd_flags=""                  # Optional flags to hastd.
ctld_enable="NO"                # CAM Target Layer / iSCSI target daemon.
local_unbound_enable="NO"       # local caching resolver

#
# kerberos. Do not run the admin daemons on slave servers
#
kerberos5_server_enable="NO"    # Run a kerberos 5 master server (or NO).
kerberos5_server="/usr/libexec/kdc"     # path to kerberos 5 KDC
kerberos5_server_flags="--detach"       # Additional flags to the kerberos 5 server
kadmind5_server_enable="NO"     # Run kadmind (or NO)
kadmind5_server="/usr/libexec/kadmind"  # path to kerberos 5 admin daemon
kpasswdd_server_enable="NO"     # Run kpasswdd (or NO)
kpasswdd_server="/usr/libexec/kpasswdd" # path to kerberos 5 passwd daemon
kfd_enable="NO"                 # Run kfd (or NO)
kfd_program="/usr/libexec/kfd"  # path to kerberos 5 kfd daemon

gssd_enable="NO"                # Run the gssd daemon (or NO).
gssd_flags=""                   # Flags for gssd.

rwhod_enable="NO"               # Run the rwho daemon (or NO).
rwhod_flags=""                  # Flags for rwhod
rarpd_enable="NO"               # Run rarpd (or NO).
rarpd_flags="-a"                # Flags to rarpd.
bootparamd_enable="NO"          # Run bootparamd (or NO).
bootparamd_flags=""             # Flags to bootparamd
pppoed_enable="NO"              # Run the PPP over Ethernet daemon.
pppoed_provider="*"             # Provider and ppp(8) config file entry.
pppoed_flags="-P /var/run/pppoed.pid"   # Flags to pppoed (if enabled).
pppoed_interface="fxp0"         # The interface that pppoed runs on.
sshd_enable="NO"                # Enable sshd
sshd_program="/usr/sbin/sshd"   # path to sshd, if you want a different one.
sshd_flags=""                   # Additional flags for sshd.
ftpd_enable="NO"                # Enable stand-alone ftpd.
ftpd_program="/usr/libexec/ftpd" # Path to ftpd, if you want a different one.
ftpd_flags=""                   # Additional flags to stand-alone ftpd.

### Network daemon (NFS): All need rpcbind_enable="YES" ###
amd_enable="NO"                 # Run amd service with $amd_flags (or NO).
amd_program="/usr/sbin/amd"     # path to amd, if you want a different one.
amd_flags="-a /.amd_mnt -l syslog /host /etc/amd.map /net /etc/amd.map"
amd_map_program="NO"            # Can be set to "ypcat -k amd.master"
nfs_client_enable="NO"          # This host is an NFS client (or NO).
nfs_access_cache="60"           # Client cache timeout in seconds
nfs_server_enable="NO"          # This host is an NFS server (or NO).
oldnfs_server_enable="NO"       # Run the old NFS server (YES/NO).
nfs_server_flags="-u -t -n 4"   # Flags to nfsd (if enabled).
mountd_enable="NO"              # Run mountd (or NO).
mountd_flags="-r"               # Flags to mountd (if NFS server enabled).
weak_mountd_authentication="NO" # Allow non-root mount requests to be served.
nfs_reserved_port_only="NO"     # Provide NFS only on secure port (or NO).
nfs_bufpackets=""               # bufspace (in packets) for client
rpc_lockd_enable="NO"           # Run NFS rpc.lockd needed for client/server.
rpc_lockd_flags=""              # Flags to rpc.lockd (if enabled).
rpc_statd_enable="NO"           # Run NFS rpc.statd needed for client/server.
rpc_statd_flags=""              # Flags to rpc.statd (if enabled).
rpcbind_enable="NO"             # Run the portmapper service (YES/NO).
rpcbind_program="/usr/sbin/rpcbind"     # path to rpcbind, if you want a different one.
rpcbind_flags=""                # Flags to rpcbind (if enabled).
rpc_ypupdated_enable="NO"       # Run if NIS master and SecureRPC (or NO).
keyserv_enable="NO"             # Run the SecureRPC keyserver (or NO).
keyserv_flags=""                # Flags to keyserv (if enabled).
nfsv4_server_enable="NO"        # Enable support for NFSv4
nfscbd_enable="NO"              # NFSv4 client side callback daemon
nfscbd_flags=""                 # Flags for nfscbd
nfsuserd_enable="NO"            # NFSv4 user/group name mapping daemon
nfsuserd_flags=""               # Flags for nfsuserd

### Network Time Services options: ###
timed_enable="NO"               # Run the time daemon (or NO).
timed_flags=""                  # Flags to timed (if enabled).
ntpdate_enable="NO"             # Run ntpdate to sync time on boot (or NO).
ntpdate_program="/usr/sbin/ntpdate"     # path to ntpdate, if you want a different one.
ntpdate_flags="-b"              # Flags to ntpdate (if enabled).
ntpdate_config="/etc/ntp.conf"  # ntpdate(8) configuration file
ntpdate_hosts=""                # Whitespace-separated list of ntpdate(8) servers.
ntpd_enable="NO"                # Run ntpd Network Time Protocol (or NO).
ntpd_program="/usr/sbin/ntpd"   # path to ntpd, if you want a different one.
ntpd_config="/etc/ntp.conf"     # ntpd(8) configuration file
ntpd_sync_on_start="NO"         # Sync time on ntpd startup, even if offset is high
ntpd_flags="-p /var/run/ntpd.pid -f /var/db/ntpd.drift"
                                # Flags to ntpd (if enabled).

# Network Information Services (NIS) options: All need rpcbind_enable="YES" ###
nis_client_enable="NO"          # We're an NIS client (or NO).
nis_client_flags=""             # Flags to ypbind (if enabled).
nis_ypset_enable="NO"           # Run ypset at boot time (or NO).
nis_ypset_flags=""              # Flags to ypset (if enabled).
nis_server_enable="NO"          # We're an NIS server (or NO).
nis_server_flags=""             # Flags to ypserv (if enabled).
nis_ypxfrd_enable="NO"          # Run rpc.ypxfrd at boot time (or NO).
nis_ypxfrd_flags=""             # Flags to rpc.ypxfrd (if enabled).
nis_yppasswdd_enable="NO"       # Run rpc.yppasswdd at boot time (or NO).
nis_yppasswdd_flags=""          # Flags to rpc.yppasswdd (if enabled).

### SNMP daemon ###
# Be sure to understand the security implications of running SNMP v1/v2
# in your network.
bsnmpd_enable="NO"              # Run the SNMP daemon (or NO).
bsnmpd_flags=""                 # Flags for bsnmpd.

### Network routing options: ###
defaultrouter="NO"              # Set to default gateway (or NO).
static_arp_pairs=""             # Set to static ARP list (or leave empty).
static_ndp_pairs=""             # Set to static NDP list (or leave empty).
static_routes=""                # Set to static route list (or leave empty).
natm_static_routes=""           # Set to static route list for NATM (or leave empty).
gateway_enable="NO"             # Set to YES if this host will be a gateway.
routed_enable="NO"              # Set to YES to enable a routing daemon.
routed_program="/sbin/routed"   # Name of routing daemon to use if enabled.
routed_flags="-q"               # Flags for routing daemon.
mrouted_enable="NO"             # Do IPv4 multicast routing.
mrouted_program="/usr/local/sbin/mrouted"       # Name of IPv4 multicast
                                                # routing daemon.  You need to
                                                # install it from package or
                                                # port.
mrouted_flags=""                # Flags for multicast routing daemon.
ipxgateway_enable="NO"          # Set to YES to enable IPX routing.
ipxrouted_enable="NO"           # Set to YES to run the IPX routing daemon.
ipxrouted_flags=""              # Flags for IPX routing daemon.
arpproxy_all="NO"               # replaces obsolete kernel option ARP_PROXYALL.
forward_sourceroute="NO"        # do source routing (only if gateway_enable is set to "YES")
accept_sourceroute="NO"         # accept source routed packets to us

### ATM interface options: ###
atm_enable="NO"                 # Configure ATM interfaces (or NO).
#atm_netif_hea0="atm 1"         # Network interfaces for physical interface.
#atm_sigmgr_hea0="uni31"        # Signalling manager for physical interface.
#atm_prefix_hea0="ILMI"         # NSAP prefix (UNI interfaces only) (or ILMI).
#atm_macaddr_hea0="NO"          # Override physical MAC address (or NO).
#atm_arpserver_atm0="0x47.0005.80.999999.9999.9999.9999.999999999999.00" # ATMARP server address (or local).
#atm_scsparp_atm0="NO"          # Run SCSP/ATMARP on network interface (or NO).
atm_pvcs=""                     # Set to PVC list (or leave empty).
atm_arps=""                     # Set to permanent ARP list (or leave empty).

### Bluetooth ###
hcsecd_enable="NO"              # Enable hcsecd(8) (or NO)
hcsecd_config="/etc/bluetooth/hcsecd.conf" # hcsecd(8) configuration file

sdpd_enable="NO"                # Enable sdpd(8) (or NO)
sdpd_control="/var/run/sdp"     # sdpd(8) control socket
sdpd_groupname="nobody"         # set spdp(8) user/group to run as after
sdpd_username="nobody"          # it initializes

bthidd_enable="NO"              # Enable bthidd(8) (or NO)
bthidd_config="/etc/bluetooth/bthidd.conf" # bthidd(8) configuration file
bthidd_hids="/var/db/bthidd.hids" # bthidd(8) known HID devices file

rfcomm_pppd_server_enable="NO"  # Enable rfcomm_pppd(8) in server mode (or NO)
rfcomm_pppd_server_profile="one two"    # Profile to use from /etc/ppp/ppp.conf
#
#rfcomm_pppd_server_one_bdaddr=""       # Override local bdaddr for 'one'
rfcomm_pppd_server_one_channel="1"      # Override local channel for 'one'
#rfcomm_pppd_server_one_register_sp="NO"        # Override SP and DUN register
#rfcomm_pppd_server_one_register_dun="NO"       # for 'one'
#
#rfcomm_pppd_server_two_bdaddr=""       # Override local bdaddr for 'two'
rfcomm_pppd_server_two_channel="3"      # Override local channel for 'two'
#rfcomm_pppd_server_two_register_sp="NO"        # Override SP and DUN register
#rfcomm_pppd_server_two_register_dun="NO"       # for 'two'

ubthidhci_enable="NO"           # Switch an USB BT controller present on
#ubthidhci_busnum="3"           # bus 3 and addr 2 from HID mode to HCI mode.
#ubthidhci_addr="2"             # Check usbconfig list to find the correct
                                # numbers for your system.

### Network link/usability verification options
netwait_enable="NO"             # Enable rc.d/netwait (or NO)
#netwait_ip=""                  # IP addresses to be pinged by netwait.
netwait_timeout="60"            # Total number of seconds to perform pings.
#netwait_if=""                  # Interface name to watch link state on.
netwait_if_timeout="30"         # Total number of seconds to monitor link state.

### Miscellaneous network options: ###
icmp_bmcastecho="NO"    # respond to broadcast ping packets

### IPv6 options: ###
ipv6_network_interfaces="auto"  # List of IPv6 network interfaces
                                # (or "auto" or "none").
ipv6_activate_all_interfaces="NO"       # If NO, interfaces which have no
                                        # corresponding $ifconfig_IF_ipv6 is
                                        # marked as IFDISABLED for security
                                        # reason.
ipv6_defaultrouter="NO"         # Set to IPv6 default gateway (or NO).
#ipv6_defaultrouter="2002:c058:6301::"  # Use this for 6to4 (RFC 3068)
ipv6_static_routes=""           # Set to static route list (or leave empty).
#ipv6_static_routes="xxx"       # An example to set fec0:0000:0000:0006::/64
                                #  route toward loopback interface.
#ipv6_route_xxx="fec0:0000:0000:0006:: -prefixlen 64 ::1"
ipv6_gateway_enable="NO"        # Set to YES if this host will be a gateway.
ipv6_cpe_wanif="NO"             # Set to the upstram interface name if this
                                # node will work as a router to forward IPv6
                                # packets not explicitly addressed to itself.
ipv6_privacy="NO"               # Use privacy address on RA-receiving IFs
                                # (RFC 4941)

route6d_enable="NO"             # Set to YES to enable an IPv6 routing daemon.
route6d_program="/usr/sbin/route6d"     # Name of IPv6 routing daemon.
route6d_flags=""                # Flags to IPv6 routing daemon.
#route6d_flags="-l"             # Example for route6d with only IPv6 site local
                                # addrs.
#route6d_flags="-q"             # If you want to run a routing daemon on an end
                                # node, you should stop advertisement.
#ipv6_network_interfaces="ed0 ep0"      # Examples for router
                                        # or static configuration for end node.
                                        # Choose correct prefix value.
#ipv6_prefix_ed0="fec0:0000:0000:0001 fec0:0000:0000:0002"  # Examples for rtr.
#ipv6_prefix_ep0="fec0:0000:0000:0003 fec0:0000:0000:0004"  # Examples for rtr.
ipv6_default_interface="NO"     # Default output interface for scoped addrs.
                                # This works only with
                                # ipv6_gateway_enable="NO".
rtsol_flags=""                  # Flags to IPv6 router solicitation.
rtsold_enable="NO"              # Set to YES to enable an IPv6 router
                                # solicitation daemon.
rtsold_flags="-a"               # Flags to an IPv6 router solicitation
                                # daemon.
rtadvd_enable="NO"              # Set to YES to enable an IPv6 router
                                # advertisement daemon. If set to YES,
                                # this router becomes a possible candidate
                                # IPv6 default router for local subnets.
rtadvd_interfaces=""            # Interfaces rtadvd sends RA packets.
mroute6d_enable="NO"            # Do IPv6 multicast routing.
mroute6d_program="/usr/local/sbin/pim6dd"       # Name of IPv6 multicast
                                                # routing daemon.  You need to
                                                # install it from package or
                                                # port.
mroute6d_flags=""               # Flags to IPv6 multicast routing daemon.
stf_interface_ipv4addr=""       # Local IPv4 addr for 6to4 IPv6 over IPv4
                                # tunneling interface. Specify this entry
                                # to enable 6to4 interface.
stf_interface_ipv4plen="0"      # Prefix length for 6to4 IPv4 addr,
                                # to limit peer addr range. Effective value
                                # is 0-31.
stf_interface_ipv6_ifid="0:0:0:1"       # IPv6 interface id for stf0.
                                # If you like, you can set "AUTO" for this.
stf_interface_ipv6_slaid="0000" # IPv6 Site Level Aggregator for stf0
ipv6_faith_prefix="NO"          # Set faith prefix to enable a FAITH
                                # IPv6-to-IPv4 TCP translator.  You also need
                                # faithd(8) setup.
ipv6_ipv4mapping="NO"           # Set to "YES" to enable IPv4 mapped IPv6 addr
                                # communication. (like ::ffff:a.b.c.d)
ipv6_ipfilter_rules="/etc/ipf6.rules"   # rules definition file for ipfilter,
                                        # see /usr/src/contrib/ipfilter/rules
                                        # for examples
ip6addrctl_enable="YES" # Set to YES to enable default address selection
ip6addrctl_verbose="NO" # Set to YES to enable verbose configuration messages
ip6addrctl_policy="AUTO"        # A pre-defined address selection policy
                                # (ipv4_prefer, ipv6_prefer, or AUTO)

##############################################################
###  System console options  #################################
##############################################################

keyboard=""             # keyboard device to use (default /dev/kbd0).
keymap="NO"             # keymap in /usr/share/syscons/keymaps/* (or NO).
keyrate="NO"            # keyboard rate to: slow, normal, fast (or NO).
keybell="NO"            # See kbdcontrol(1) for options.  Use "off" to disable.
keychange="NO"          # function keys default values (or NO).
cursor="NO"             # cursor type {normal|blink|destructive} (or NO).
scrnmap="NO"            # screen map in /usr/share/syscons/scrnmaps/* (or NO).
font8x16="NO"           # font 8x16 from /usr/share/syscons/fonts/* (or NO).
font8x14="NO"           # font 8x14 from /usr/share/syscons/fonts/* (or NO).
font8x8="NO"            # font 8x8 from /usr/share/syscons/fonts/* (or NO).
blanktime="300"         # blank time (in seconds) or "NO" to turn it off.
saver="NO"              # screen saver: Uses /boot/kernel/${saver}_saver.ko
moused_nondefault_enable="YES" # Treat non-default mice as enabled unless
                               # specifically overriden in rc.conf(5).
moused_enable="NO"      # Run the mouse daemon.
moused_type="auto"      # See man page for rc.conf(5) for available settings.
moused_port="/dev/psm0" # Set to your mouse port.
moused_flags=""         # Any additional flags to moused.
mousechar_start="NO"    # if 0xd0-0xd3 default range is occupied in your
                        # language code table, specify alternative range
                        # start like mousechar_start=3, see vidcontrol(1)
allscreens_flags=""     # Set this vidcontrol mode for all virtual screens
allscreens_kbdflags=""  # Set this kbdcontrol mode for all virtual screens

##############################################################
###  Mail Transfer Agent (MTA) options  ######################
##############################################################

mta_start_script="/etc/rc.sendmail"
                        # Script to start your chosen MTA, called by /etc/rc.
# Settings for /etc/rc.sendmail and /etc/rc.d/sendmail:
sendmail_enable="NO"    # Run the sendmail inbound daemon (YES/NO).
sendmail_pidfile="/var/run/sendmail.pid"        # sendmail pid file
sendmail_procname="/usr/sbin/sendmail"          # sendmail process name
sendmail_flags="-L sm-mta -bd -q30m" # Flags to sendmail (as a server)
sendmail_cert_create="YES"      # Create a server certificate if none (YES/NO)
#sendmail_cert_cn="CN"          # CN of the generate certificate
sendmail_submit_enable="YES"    # Start a localhost-only MTA for mail submission
sendmail_submit_flags="-L sm-mta -bd -q30m -ODaemonPortOptions=Addr=localhost"
                                # Flags for localhost-only MTA
sendmail_outbound_enable="YES"  # Dequeue stuck mail (YES/NO).
sendmail_outbound_flags="-L sm-queue -q30m" # Flags to sendmail (outbound only)
sendmail_msp_queue_enable="YES" # Dequeue stuck clientmqueue mail (YES/NO).
sendmail_msp_queue_flags="-L sm-msp-queue -Ac -q30m"
                                # Flags for sendmail_msp_queue daemon.
sendmail_rebuild_aliases="NO"   # Run newaliases if necessary (YES/NO).


##############################################################
###  Miscellaneous administrative options  ###################
##############################################################

auditd_enable="NO"      # Run the audit daemon.
auditd_program="/usr/sbin/auditd"       # Path to the audit daemon.
auditd_flags=""         # Which options to pass to the audit daemon.
auditdistd_enable="NO"  # Run the audit daemon.
auditdistd_program="/usr/sbin/auditdistd"       # Path to the auditdistd daemon.
auditdistd_flags=""     # Which options to pass to the auditdistd daemon.
cron_enable="YES"       # Run the periodic job daemon.
cron_program="/usr/sbin/cron"   # Which cron executable to run (if enabled).
cron_dst="YES"          # Handle DST transitions intelligently (YES/NO)
cron_flags=""           # Which options to pass to the cron daemon.
lpd_enable="NO"         # Run the line printer daemon.
lpd_program="/usr/sbin/lpd"     # path to lpd, if you want a different one.
lpd_flags=""            # Flags to lpd (if enabled).
nscd_enable="NO"        # Run the nsswitch caching daemon.
chkprintcap_enable="NO" # Run chkprintcap(8) before running lpd.
chkprintcap_flags="-d"  # Create missing directories by default.
dumpdev="NO"            # Device to crashdump to (device name, AUTO, or NO).
dumpdir="/var/crash"    # Directory where crash dumps are to be stored
savecore_flags="-m 10"  # Used if dumpdev is enabled above, and present.
                        # By default, only the 10 most recent kernel dumps
                        # are saved.
crashinfo_enable="YES"  # Automatically generate crash dump summary.
crashinfo_program="/usr/sbin/crashinfo" # Script to generate crash dump summary.
quota_enable="NO"       # turn on quotas on startup (or NO).
check_quotas="YES"      # Check quotas on startup (or NO).
quotaon_flags="-a"      # Turn quotas on for all file systems (if enabled)
quotaoff_flags="-a"     # Turn quotas off for all file systems at shutdown
quotacheck_flags="-a"   # Check all file system quotas (if enabled)
accounting_enable="NO"  # Turn on process accounting (or NO).
ibcs2_enable="NO"       # Ibcs2 (SCO) emulation loaded at startup (or NO).
ibcs2_loaders="coff"    # List of additional Ibcs2 loaders (or NO).
firstboot_sentinel="/firstboot" # Scripts with "firstboot" keyword are run if
                        # this file exists.  Should be on a R/W filesystem so
                        # the file can be deleted after the boot completes.

# Emulation/compatibility services provided by /etc/rc.d/abi
sysvipc_enable="NO"     # Load System V IPC primitives at startup (or NO).
linux_enable="NO"       # Linux binary compatibility loaded at startup (or NO).
svr4_enable="NO"        # SysVR4 emulation loaded at startup (or NO).
clear_tmp_enable="NO"   # Clear /tmp at startup.
clear_tmp_X="YES"       # Clear and recreate X11-related directories in /tmp
ldconfig_insecure="NO"  # Set to YES to disable ldconfig security checks
ldconfig_paths="/usr/lib/compat /usr/local/lib /usr/local/lib/compat/pkg"
                        # shared library search paths
ldconfig32_paths="/usr/lib32" # 32-bit compatibility shared library search paths
ldconfig_paths_aout="/usr/lib/compat/aout /usr/local/lib/aout"
                        # a.out shared library search paths
ldconfig_local_dirs="/usr/local/libdata/ldconfig"
                        # Local directories with ldconfig configuration files.
ldconfig_local32_dirs="/usr/local/libdata/ldconfig32"
                        # Local directories with 32-bit compatibility ldconfig
                        # configuration files.
kern_securelevel_enable="NO"    # kernel security level (see security(7))
kern_securelevel="-1"   # range: -1..3 ; `-1' is the most insecure
                        # Note that setting securelevel to 0 will result
                        # in the system booting with securelevel set to 1, as
                        # init(8) will raise the level when rc(8) completes.
update_motd="YES"       # update version info in /etc/motd (or NO)
entropy_file="/entropy" # Set to NO to disable caching entropy through reboots.
                        # /var/db/entropy-file is preferred if / is not avail.
entropy_dir="/var/db/entropy" # Set to NO to disable caching entropy via cron.
entropy_save_sz="2048"  # Size of the entropy cache files.
entropy_save_num="8"    # Number of entropy cache files to save.
harvest_interrupt="YES" # Entropy device harvests interrupt randomness
harvest_ethernet="YES"  # Entropy device harvests ethernet randomness
harvest_p_to_p="YES"    # Entropy device harvests point-to-point randomness
harvest_swi="YES"       # Entropy device harvests internal SWI randomness
dmesg_enable="YES"      # Save dmesg(8) to /var/run/dmesg.boot
watchdogd_enable="NO"   # Start the software watchdog daemon
watchdogd_flags=""      # Flags to watchdogd (if enabled)
devfs_rulesets="/etc/defaults/devfs.rules /etc/devfs.rules" # Files containing
                                                            # devfs(8) rules.
devfs_system_ruleset="" # The name (NOT number) of a ruleset to apply to /dev
devfs_set_rulesets=""   # A list of /mount/dev=ruleset_name settings to
                        # apply (must be mounted already, i.e. fstab(5))
devfs_load_rulesets="NO"        # Enable to always load the default rulesets
performance_cx_lowest="HIGH"    # Online CPU idle state
performance_cpu_freq="NONE"     # Online CPU frequency
economy_cx_lowest="HIGH"        # Offline CPU idle state
economy_cpu_freq="NONE"         # Offline CPU frequency
virecover_enable="YES"  # Perform housekeeping for the vi(1) editor
ugidfw_enable="NO"      # Load mac_bsdextended(4) rules on boot
bsdextended_script="/etc/rc.bsdextended"        # Default mac_bsdextended(4)
                                                # ruleset file.
newsyslog_enable="YES"  # Run newsyslog at startup.
newsyslog_flags="-CN"   # Newsyslog flags to create marked files
mixer_enable="YES"      # Run the sound mixer.
opensm_enable="NO"      # Opensm(8) for infiniband devices defaults to off

##############################################################
### Jail Configuration (see rc.conf(5) manual page) ##########
##############################################################
jail_enable="NO"        # Set to NO to disable starting of any jails
jail_parallel_start="NO"        # Start jails in the background
jail_list=""            # Space separated list of names of jails

##############################################################
### Define source_rc_confs, the mechanism used by /etc/rc.* ##
### scripts to source rc_conf_files overrides safely.       ##
##############################################################

if [ -z "${source_rc_confs_defined}" ]; then
        source_rc_confs_defined=yes
        source_rc_confs() {
                local i sourced_files
                for i in ${rc_conf_files}; do
                        case ${sourced_files} in
                        *:$i:*)
                                ;;
                        *)
                                sourced_files="${sourced_files}:$i:"
                                if [ -r $i ]; then
                                        . $i
                                fi
                                ;;
                        esac
                done
        }
fi