- Copy stable/10 (r259064) to releng/10.0 as part of the

[FreeBSD/releng/10.0.git] / sbin / dhclient / dhclient.conf.5

.\"     $OpenBSD: dhclient.conf.5,v 1.5 2004/11/01 23:10:18 henning Exp $
.\"
.\" Copyright (c) 1997 The Internet Software Consortium.
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\"
.\" 1. Redistributions of source code must retain the above copyright
.\"    notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\"    notice, this list of conditions and the following disclaimer in the
.\"    documentation and/or other materials provided with the distribution.
.\" 3. Neither the name of The Internet Software Consortium nor the names
.\"    of its contributors may be used to endorse or promote products derived
.\"    from this software without specific prior written permission.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE INTERNET SOFTWARE CONSORTIUM AND
.\" CONTRIBUTORS ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES,
.\" INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
.\" MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
.\" DISCLAIMED.  IN NO EVENT SHALL THE INTERNET SOFTWARE CONSORTIUM OR
.\" CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
.\" SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
.\" LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
.\" USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
.\" ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
.\" OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
.\" OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
.\" SUCH DAMAGE.
.\"
.\" This software has been written for the Internet Software Consortium
.\" by Ted Lemon <mellon@fugue.com> in cooperation with Vixie
.\" Enterprises.  To learn more about the Internet Software Consortium,
.\" see ``http://www.isc.org/isc''.  To learn more about Vixie
.\" Enterprises, see ``http://www.vix.com''.
.\"
.\" $FreeBSD$
.\"
.Dd January 1, 1997
.Dt DHCLIENT.CONF 5
.Os
.Sh NAME
.Nm dhclient.conf
.Nd DHCP client configuration file
.Sh DESCRIPTION
The
.Nm
file contains configuration information for
.Xr dhclient 8 ,
the Internet Software Consortium DHCP Client.
.Pp
The
.Nm
file is a free-form ASCII text file.
It is parsed by the recursive-descent parser built into
.Xr dhclient 8 .
The file may contain extra tabs and newlines for formatting purposes.
Keywords in the file are case-insensitive.
Comments may be placed anywhere within the file (except within quotes).
Comments begin with the
.Ql #
character and end at the end of the line.
.Pp
The
.Nm
file can be used to configure the behaviour of the client in a wide variety
of ways: protocol timing, information requested from the server, information
required of the server, defaults to use if the server does not provide
certain information, values with which to override information provided by
the server, or values to prepend or append to information provided by the
server.
The configuration file can also be preinitialized with addresses to
use on networks that do not have DHCP servers.
.Sh PROTOCOL TIMING
The timing behaviour of the client need not be configured by the user.
If no timing configuration is provided by the user, a fairly
reasonable timing behaviour will be used by default - one which
results in fairly timely updates without placing an inordinate load on
the server.
.Pp
The following statements can be used to adjust the timing behaviour of
the DHCP client if required, however:
.Bl -tag -width indent
.It Ic timeout Ar time ;
The
.Ic timeout
statement determines the amount of time that must pass between the
time that the client begins to try to determine its address and the
time that it decides that it is not going to be able to contact a server.
By default, this timeout is sixty seconds.
After the timeout has passed, if there are any static leases defined in the
configuration file, or any leases remaining in the lease database that
have not yet expired, the client will loop through these leases
attempting to validate them, and if it finds one that appears to be
valid, it will use that lease's address.
If there are no valid static leases or unexpired leases in the lease database,
the client will restart the protocol after the defined retry interval.
.It Ic retry Ar time ;
The
.Ic retry
statement determines the time that must pass after the client has
determined that there is no DHCP server present before it tries again
to contact a DHCP server.
By default, this is five minutes.
.It Ic select-timeout Ar time ;
It is possible (some might say desirable) for there to be more than
one DHCP server serving any given network.
In this case, it is possible that a client may be sent more than one offer
in response to its initial lease discovery message.
It may be that one of these offers is preferable to the other
(e.g., one offer may have the address the client previously used,
and the other may not).
.Pp
The
.Ic select-timeout
is the time after the client sends its first lease discovery request
at which it stops waiting for offers from servers, assuming that it
has received at least one such offer.
If no offers have been received by the time the
.Ic select-timeout
has expired, the client will accept the first offer that arrives.
.Pp
By default, the
.Ic select-timeout
is zero seconds - that is, the client will take the first offer it sees.
.It Ic reboot Ar time ;
When the client is restarted, it first tries to reacquire the last
address it had.
This is called the INIT-REBOOT state.
If it is still attached to the same network it was attached to when it last
ran, this is the quickest way to get started.
The
.Ic reboot
statement sets the time that must elapse after the client first tries
to reacquire its old address before it gives up and tries to discover
a new address.
By default, the reboot timeout is ten seconds.
.It Ic backoff-cutoff Ar time ;
The client uses an exponential backoff algorithm with some randomness,
so that if many clients try to configure themselves at the same time,
they will not make their requests in lockstep.
The
.Ic backoff-cutoff
statement determines the maximum amount of time that the client is
allowed to back off.
It defaults to two minutes.
.It Ic initial-interval Ar time ;
The
.Ic initial-interval
statement sets the amount of time between the first attempt to reach a
server and the second attempt to reach a server.
Each time a message is sent, the interval between messages is incremented by
twice the current interval multiplied by a random number between zero and one.
If it is greater than the
.Ic backoff-cutoff
amount, it is set to that
amount.
It defaults to ten seconds.
.El
.Sh LEASE REQUIREMENTS AND REQUESTS
The DHCP protocol allows the client to request that the server send it
specific information, and not send it other information that it is not
prepared to accept.
The protocol also allows the client to reject offers from servers if they
do not contain information the client needs, or if the information provided
is not satisfactory.
.Pp
There is a variety of data contained in offers that DHCP servers send
to DHCP clients.
The data that can be specifically requested is what are called
.Em DHCP Options .
DHCP Options are defined in
.Xr dhcp-options 5 .
.Bl -tag -width indent
.It Ic request Oo Ar option Oc Oo , Ar ... option Oc ;
The
.Ic request
statement causes the client to request that any server responding to the
client send the client its values for the specified options.
Only the option names should be specified in the request statement - not
option parameters.
.It Ic require Oo Ar option Oc Oo , Ar ... option Oc ;
The
.Ic require
statement lists options that must be sent in order for an offer to be accepted.
Offers that do not contain all the listed options will be ignored.
.It Ic send No { Oo Ar option declaration Oc Oo , Ar ... option declaration Oc }
The
.Ic send
statement causes the client to send the specified options to the server with
the specified values.
These are full option declarations as described in
.Xr dhcp-options 5 .
Options that are always sent in the DHCP protocol should not be specified
here, except that the client can specify a
.Ar dhcp-lease-time
option other than the default requested lease time, which is two hours.
The other obvious use for this statement is to send information to the server
that will allow it to differentiate between this client and other
clients or kinds of clients.
.El
.Sh OPTION MODIFIERS
In some cases, a client may receive option data from the server which
is not really appropriate for that client, or may not receive
information that it needs, and for which a useful default value exists.
It may also receive information which is useful, but which needs to be
supplemented with local information.
To handle these needs, several option modifiers are available.
.Bl -tag -width indent
.It Xo
.Ic default No { Op Ar option declaration
.Oo , Ar ... option declaration Oc }
.Xc
If for some set of options the client should use the value supplied by
the server, but needs to use some default value if no value was supplied
by the server, these values can be defined in the
.Ic default
statement.
.It Xo
.Ic supersede No { Op Ar option declaration
.Oo , Ar ... option declaration Oc }
.Xc
If for some set of options the client should always use its own value
rather than any value supplied by the server, these values can be defined
in the
.Ic supersede
statement.
.It Xo
.Ic prepend No { Op Ar option declaration
.Oo , Ar ... option declaration Oc }
.Xc
If for some set of options the client should use a value you supply,
and then use the values supplied by the server, if any,
these values can be defined in the
.Ic prepend
statement.
The
.Ic prepend
statement can only be used for options which allow more than one value to
be given.
This restriction is not enforced - if violated, the results are unpredictable.
.It Xo
.Ic append No { Op Ar option declaration
.Oo , Ar ... option declaration Oc }
.Xc
If for some set of options the client should first use the values
supplied by the server, if any, and then use values you supply, these
values can be defined in the
.Ic append
statement.
The
.Ic append
statement can only be used for options which allow more than one value to
be given.
This restriction is not enforced - if you ignore it,
the behaviour will be unpredictable.
.El
.Sh LEASE DECLARATIONS
The lease declaration:
.Pp
.D1 Ic lease No { Ar lease-declaration Oo Ar ... lease-declaration Oc }
.Pp
The DHCP client may decide after some period of time (see
.Sx PROTOCOL TIMING )
that it is not going to succeed in contacting a server.
At that time, it consults its own database of old leases and tests each one
that has not yet timed out by pinging the listed router for that lease to
see if that lease could work.
It is possible to define one or more
.Em fixed
leases in the client configuration file for networks where there is no DHCP
or BOOTP service, so that the client can still automatically configure its
address.
This is done with the
.Ic lease
statement.
.Pp
NOTE: the lease statement is also used in the
.Pa dhclient.leases
file in order to record leases that have been received from DHCP servers.
Some of the syntax for leases as described below is only needed in the
.Pa dhclient.leases
file.
Such syntax is documented here for completeness.
.Pp
A lease statement consists of the
.Ic lease
keyword, followed by a left
curly brace, followed by one or more lease declaration statements,
followed by a right curly brace.
The following lease declarations are possible:
.Bl -tag -width indent
.It Ic bootp ;
The
.Ic bootp
statement is used to indicate that the lease was acquired using the
BOOTP protocol rather than the DHCP protocol.
It is never necessary to specify this in the client configuration file.
The client uses this syntax in its lease database file.
.It Ic interface Qq Ar string ;
The
.Ic interface
lease statement is used to indicate the interface on which the lease is valid.
If set, this lease will only be tried on a particular interface.
When the client receives a lease from a server, it always records the
interface number on which it received that lease.
If predefined leases are specified in the
.Nm
file, the interface should also be specified, although this is not required.
.It Ic fixed-address Ar ip-address ;
The
.Ic fixed-address
statement is used to set the IP address of a particular lease.
This is required for all lease statements.
The IP address must be specified as a dotted quad (e.g.,
.Li 12.34.56.78 ) .
.It Ic filename Qq Ar string ;
The
.Ic filename
statement specifies the name of the boot filename to use.
This is not used by the standard client configuration script, but is
included for completeness.
.It Ic server-name Qq Ar string ;
The
.Ic server-name
statement specifies the name of the boot server name to use.
This is also not used by the standard client configuration script.
.It Ic option Ar option-declaration ;
The
.Ic option
statement is used to specify the value of an option supplied by the server,
or, in the case of predefined leases declared in
.Nm ,
the value that the user wishes the client configuration script to use if the
predefined lease is used.
.It Ic script Qq Ar script-name ;
The
.Ic script
statement is used to specify the pathname of the DHCP client configuration
script.
This script is used by the DHCP client to set each interface's initial
configuration prior to requesting an address, to test the address once it
has been offered, and to set the interface's final configuration once a
lease has been acquired.
If no lease is acquired, the script is used to test predefined leases, if
any, and also called once if no valid lease can be identified.
For more information, see
.Xr dhclient.leases 5 .
.It Ic medium Qq Ar "media setup" ;
The
.Ic medium
statement can be used on systems where network interfaces cannot
automatically determine the type of network to which they are connected.
The
.Ar "media setup"
string is a system-dependent parameter which is passed
to the DHCP client configuration script when initializing the interface.
On
.Ux
and
.Ux Ns -like
systems, the argument is passed on the
.Xr ifconfig 8
command line
when configuring the interface.
.Pp
The DHCP client automatically declares this parameter if it used a
media type (see the
.Ic media
statement) when configuring the interface in order to obtain a lease.
This statement should be used in predefined leases only if the network
interface requires media type configuration.
.It Ic renew Ar date ;
.It Ic rebind Ar date ;
.It Ic expire Ar date ;
The
.Ic renew
statement defines the time at which the DHCP client should begin trying to
contact its server to renew a lease that it is using.
The
.Ic rebind
statement defines the time at which the DHCP client should begin to try to
contact
.Em any
DHCP server in order to renew its lease.
The
.Ic expire
statement defines the time at which the DHCP client must stop using a lease
if it has not been able to contact a server in order to renew it.
.El
.Pp
These declarations are automatically set in leases acquired by the
DHCP client, but must also be configured in predefined leases - a
predefined lease whose expiry time has passed will not be used by the
DHCP client.
.Pp
Dates are specified as follows:
.Bd -ragged -offset indent
.Ar <weekday>
.Sm off
.Ar <year> No / Ar <month> No / Ar <day>
.Ar <hour> : <minute> : <second>
.Sm on
.Ed
.Pp
The weekday is present to make it easy for a human to tell when a
lease expires - it is specified as a number from zero to six, with zero
being Sunday.
When declaring a predefined lease, it can always be specified as zero.
The year is specified with the century, so it should generally be four
digits except for really long leases.
The month is specified as a number starting with 1 for January.
The day of the month is likewise specified starting with 1.
The hour is a number between 0 and 23,
the minute a number between 0 and 59,
and the second also a number between 0 and 59.
.Sh ALIAS DECLARATIONS
.Ic alias No { Ar declarations ... No }
.Pp
Some DHCP clients running TCP/IP roaming protocols may require that in
addition to the lease they may acquire via DHCP, their interface also
be configured with a predefined IP alias so that they can have a
permanent IP address even while roaming.
The Internet Software Consortium DHCP client does not support roaming with
fixed addresses directly, but in order to facilitate such experimentation,
the DHCP client can be set up to configure an IP alias using the
.Ic alias
declaration.
.Pp
The
.Ic alias
declaration resembles a lease declaration, except that options other than
the subnet-mask option are ignored by the standard client configuration
script, and expiry times are ignored.
A typical alias declaration includes an interface declaration, a fixed-address
declaration for the IP alias address, and a subnet-mask option declaration.
A medium statement should never be included in an alias declaration.
.Sh OTHER DECLARATIONS
.Bl -tag -width indent
.It Ic reject Ar ip-address ;
The
.Ic reject
statement causes the DHCP client to reject offers from servers who use
the specified address as a server identifier.
This can be used to avoid being configured by rogue or misconfigured DHCP
servers, although it should be a last resort - better to track down
the bad DHCP server and fix it.
.It Ic interface Qo Ar name Qc { Ar declarations ... No }
A client with more than one network interface may require different
behaviour depending on which interface is being configured.
All timing parameters and declarations other than lease and alias
declarations can be enclosed in an interface declaration, and those
parameters will then be used only for the interface that matches the
specified name.
Interfaces for which there is no interface declaration will use the
parameters declared outside of any interface declaration,
or the default settings.
.It Ic media Qo Ar "media setup" Qc Oo , Qo Ar "media setup" Qc , Ar ... Oc ;
The
.Ic media
statement defines one or more media configuration parameters which may
be tried while attempting to acquire an IP address.
The DHCP client will cycle through each media setup string on the list,
configuring the interface using that setup and attempting to boot,
and then trying the next one.
This can be used for network interfaces which are not capable of sensing
the media type unaided - whichever media type succeeds in getting a request
to the server and hearing the reply is probably right (no guarantees).
.Pp
The media setup is only used for the initial phase of address
acquisition (the DHCPDISCOVER and DHCPOFFER packets).
Once an address has been acquired, the DHCP client will record it in its
lease database and will record the media type used to acquire the address.
Whenever the client tries to renew the lease, it will use that same media type.
The lease must expire before the client will go back to cycling through media
types.
.El
.Sh EXAMPLES
The following configuration file is used on a laptop
which has an IP alias of
.Li 192.5.5.213 ,
and has one interface,
.Li ep0
(a 3Com 3C589C).
Booting intervals have been shortened somewhat from the default, because
the client is known to spend most of its time on networks with little DHCP
activity.
The laptop does roam to multiple networks.
.Bd -literal -offset indent
timeout 60;
retry 60;
reboot 10;
select-timeout 5;
initial-interval 2;
reject 192.33.137.209;

interface "ep0" {
    send host-name "andare.fugue.com";
    send dhcp-client-identifier 1:0:a0:24:ab:fb:9c;
    send dhcp-lease-time 3600;
    supersede domain-name "fugue.com rc.vix.com home.vix.com";
    prepend domain-name-servers 127.0.0.1;
    request subnet-mask, broadcast-address, time-offset, routers,
            domain-name, domain-name-servers, host-name;
    require subnet-mask, domain-name-servers;
    script "/etc/dhclient-script";
    media "media 10baseT/UTP", "media 10base2/BNC";
}

alias {
  interface "ep0";
  fixed-address 192.5.5.213;
  option subnet-mask 255.255.255.255;
}
.Ed
.Pp
This is a very complicated
.Nm
file - in general, yours should be much simpler.
In many cases, it is sufficient to just create an empty
.Nm
file - the defaults are usually fine.
.Sh SEE ALSO
.Xr dhclient.leases 5 ,
.Xr dhcpd.conf 5 ,
.Xr dhcp-options 5 ,
.Xr dhclient 8 ,
.Xr dhcpd 8
.Rs
.%R "RFC 2132, RFC 2131"
.Re
.Sh AUTHORS
.An -nosplit
The
.Xr dhclient 8
utility
was written by
.An Ted Lemon Aq mellon@vix.com
under a contract with Vixie Labs.
.Pp
The current implementation was reworked by
.An Henning Brauer Aq henning@openbsd.org .