]> CyberLeo.Net >> Repos - FreeBSD/releng/10.0.git/blob - sbin/ipfw/main.c
- Copy stable/10 (r259064) to releng/10.0 as part of the
[FreeBSD/releng/10.0.git] / sbin / ipfw / main.c
1 /*
2  * Copyright (c) 2002-2003,2010 Luigi Rizzo
3  * Copyright (c) 1996 Alex Nash, Paul Traina, Poul-Henning Kamp
4  * Copyright (c) 1994 Ugen J.S.Antsilevich
5  *
6  * Idea and grammar partially left from:
7  * Copyright (c) 1993 Daniel Boulet
8  *
9  * Redistribution and use in source forms, with and without modification,
10  * are permitted provided that this entire comment appears intact.
11  *
12  * Redistribution in binary form may occur without any restrictions.
13  * Obviously, it would be nice if you gave credit where credit is due
14  * but requiring it would be too onerous.
15  *
16  * This software is provided ``AS IS'' without any warranties of any kind.
17  *
18  * Command line interface for IP firewall facility
19  *
20  * $FreeBSD$
21  */
22
23 #include <sys/wait.h>
24 #include <ctype.h>
25 #include <err.h>
26 #include <errno.h>
27 #include <signal.h>
28 #include <stdio.h>
29 #include <stdlib.h>
30 #include <string.h>
31 #include <sysexits.h>
32 #include <unistd.h>
33
34 #include "ipfw2.h"
35
36 static void
37 help(void)
38 {
39         fprintf(stderr,
40 "ipfw syntax summary (but please do read the ipfw(8) manpage):\n\n"
41 "\tipfw [-abcdefhnNqStTv] <command>\n\n"
42 "where <command> is one of the following:\n\n"
43 "add [num] [set N] [prob x] RULE-BODY\n"
44 "{pipe|queue} N config PIPE-BODY\n"
45 "[pipe|queue] {zero|delete|show} [N{,N}]\n"
46 "nat N config {ip IPADDR|if IFNAME|log|deny_in|same_ports|unreg_only|reset|\n"
47 "               reverse|proxy_only|redirect_addr linkspec|\n"
48 "               redirect_port linkspec|redirect_proto linkspec}\n"
49 "set [disable N... enable N...] | move [rule] X to Y | swap X Y | show\n"
50 "set N {show|list|zero|resetlog|delete} [N{,N}] | flush\n"
51 "table N {add ip[/bits] [value] | delete ip[/bits] | flush | list}\n"
52 "table all {flush | list}\n"
53 "\n"
54 "RULE-BODY:     check-state [PARAMS] | ACTION [PARAMS] ADDR [OPTION_LIST]\n"
55 "ACTION:        check-state | allow | count | deny | unreach{,6} CODE |\n"
56 "               skipto N | {divert|tee} PORT | forward ADDR |\n"
57 "               pipe N | queue N | nat N | setfib FIB | reass\n"
58 "PARAMS:        [log [logamount LOGLIMIT]] [altq QUEUE_NAME]\n"
59 "ADDR:          [ MAC dst src ether_type ] \n"
60 "               [ ip from IPADDR [ PORT ] to IPADDR [ PORTLIST ] ]\n"
61 "               [ ipv6|ip6 from IP6ADDR [ PORT ] to IP6ADDR [ PORTLIST ] ]\n"
62 "IPADDR:        [not] { any | me | ip/bits{x,y,z} | table(t[,v]) | IPLIST }\n"
63 "IP6ADDR:       [not] { any | me | me6 | ip6/bits | IP6LIST }\n"
64 "IP6LIST:       { ip6 | ip6/bits }[,IP6LIST]\n"
65 "IPLIST:        { ip | ip/bits | ip:mask }[,IPLIST]\n"
66 "OPTION_LIST:   OPTION [OPTION_LIST]\n"
67 "OPTION:        bridged | diverted | diverted-loopback | diverted-output |\n"
68 "       {dst-ip|src-ip} IPADDR | {dst-ip6|src-ip6|dst-ipv6|src-ipv6} IP6ADDR |\n"
69 "       {dst-port|src-port} LIST |\n"
70 "       estab | frag | {gid|uid} N | icmptypes LIST | in | out | ipid LIST |\n"
71 "       iplen LIST | ipoptions SPEC | ipprecedence | ipsec | iptos SPEC |\n"
72 "       ipttl LIST | ipversion VER | keep-state | layer2 | limit ... |\n"
73 "       icmp6types LIST | ext6hdr LIST | flow-id N[,N] | fib FIB |\n"
74 "       mac ... | mac-type LIST | proto LIST | {recv|xmit|via} {IF|IPADDR} |\n"
75 "       setup | {tcpack|tcpseq|tcpwin} NN | tcpflags SPEC | tcpoptions SPEC |\n"
76 "       tcpdatalen LIST | verrevpath | versrcreach | antispoof\n"
77 );
78
79         exit(0);
80 }
81
82 /*
83  * Called with the arguments, including program name because getopt
84  * wants it to be present.
85  * Returns 0 if successful, 1 if empty command, errx() in case of errors.
86  * First thing we do is process parameters creating an argv[] array
87  * which includes the program name and a NULL entry at the end.
88  * If we are called with a single string, we split it on whitespace.
89  * Also, arguments with a trailing ',' are joined to the next one.
90  * The pointers (av[]) and data are in a single chunk of memory.
91  * av[0] points to the original program name, all other entries
92  * point into the allocated chunk.
93  */
94 static int
95 ipfw_main(int oldac, char **oldav)
96 {
97         int ch, ac;
98         const char *errstr;
99         char **av, **save_av;
100         int do_acct = 0;                /* Show packet/byte count */
101         int try_next = 0;               /* set if pipe cmd not found */
102         int av_size;                    /* compute the av size */
103         char *av_p;                     /* used to build the av list */
104
105 #define WHITESP         " \t\f\v\n\r"
106         if (oldac < 2)
107                 return 1;       /* need at least one argument */
108
109         if (oldac == 2) {
110                 /*
111                  * If we are called with one argument, try to split it into
112                  * words for subsequent parsing. Spaces after a ',' are
113                  * removed by copying the string in-place.
114                  */
115                 char *arg = oldav[1];   /* The string is the first arg. */
116                 int l = strlen(arg);
117                 int copy = 0;           /* 1 if we need to copy, 0 otherwise */
118                 int i, j;
119
120                 for (i = j = 0; i < l; i++) {
121                         if (arg[i] == '#')      /* comment marker */
122                                 break;
123                         if (copy) {
124                                 arg[j++] = arg[i];
125                                 copy = !strchr("," WHITESP, arg[i]);
126                         } else {
127                                 copy = !strchr(WHITESP, arg[i]);
128                                 if (copy)
129                                         arg[j++] = arg[i];
130                         }
131                 }
132                 if (!copy && j > 0)     /* last char was a 'blank', remove it */
133                         j--;
134                 l = j;                  /* the new argument length */
135                 arg[j++] = '\0';
136                 if (l == 0)             /* empty string! */
137                         return 1;
138
139                 /*
140                  * First, count number of arguments. Because of the previous
141                  * processing, this is just the number of blanks plus 1.
142                  */
143                 for (i = 0, ac = 1; i < l; i++)
144                         if (strchr(WHITESP, arg[i]) != NULL)
145                                 ac++;
146
147                 /*
148                  * Allocate the argument list structure as a single block
149                  * of memory, containing pointers and the argument
150                  * strings. We include one entry for the program name
151                  * because getopt expects it, and a NULL at the end
152                  * to simplify further parsing.
153                  */
154                 ac++;           /* add 1 for the program name */
155                 av_size = (ac+1) * sizeof(char *) + l + 1;
156                 av = safe_calloc(av_size, 1);
157
158                 /*
159                  * Init the argument pointer to the end of the array
160                  * and copy arguments from arg[] to av[]. For each one,
161                  * j is the initial character, i is the one past the end.
162                  */
163                 av_p = (char *)&av[ac+1];
164                 for (ac = 1, i = j = 0; i < l; i++) {
165                         if (strchr(WHITESP, arg[i]) != NULL || i == l-1) {
166                                 if (i == l-1)
167                                         i++;
168                                 bcopy(arg+j, av_p, i-j);
169                                 av[ac] = av_p;
170                                 av_p += i-j;    /* the length of the string */
171                                 *av_p++ = '\0';
172                                 ac++;
173                                 j = i + 1;
174                         }
175                 }
176         } else {
177                 /*
178                  * If an argument ends with ',' join with the next one.
179                  */
180                 int first, i, l=0;
181
182                 /*
183                  * Allocate the argument list structure as a single block
184                  * of memory, containing both pointers and the argument
185                  * strings. We include some space for the program name
186                  * because getopt expects it.
187                  * We add an extra pointer to the end of the array,
188                  * to make simpler further parsing.
189                  */
190                 for (i=0; i<oldac; i++)
191                         l += strlen(oldav[i]);
192
193                 av_size = (oldac+1) * sizeof(char *) + l + oldac;
194                 av = safe_calloc(av_size, 1);
195
196                 /*
197                  * Init the argument pointer to the end of the array
198                  * and copy arguments from arg[] to av[]
199                  */
200                 av_p = (char *)&av[oldac+1];
201                 for (first = i = ac = 1, l = 0; i < oldac; i++) {
202                         char *arg = oldav[i];
203                         int k = strlen(arg);
204
205                         l += k;
206                         if (arg[k-1] != ',' || i == oldac-1) {
207                                 /* Time to copy. */
208                                 av[ac] = av_p;
209                                 for (l=0; first <= i; first++) {
210                                         strcat(av_p, oldav[first]);
211                                         av_p += strlen(oldav[first]);
212                                 }
213                                 *av_p++ = '\0';
214                                 ac++;
215                                 l = 0;
216                                 first = i+1;
217                         }
218                 }
219         }
220
221         /*
222          * set the progname pointer to the original string
223          * and terminate the array with null
224          */
225         av[0] = oldav[0];
226         av[ac] = NULL;
227
228         /* Set the force flag for non-interactive processes */
229         if (!co.do_force)
230                 co.do_force = !isatty(STDIN_FILENO);
231
232 #ifdef EMULATE_SYSCTL /* sysctl emulation */
233         if ( ac >= 2 && !strcmp(av[1], "sysctl")) {
234                 char *s;
235                 int i;
236
237                 if (ac != 3) {
238                         printf( "sysctl emulation usage:\n"
239                                 "       ipfw sysctl name[=value]\n"
240                                 "       ipfw sysctl -a\n");
241                         return 0;
242                 }
243                 s = strchr(av[2], '=');
244                 if (s == NULL) {
245                         s = !strcmp(av[2], "-a") ? NULL : av[2];
246                         sysctlbyname(s, NULL, NULL, NULL, 0);
247                 } else {        /* ipfw sysctl x.y.z=value */
248                         /* assume an INT value, will extend later */
249                         if (s[1] == '\0') {
250                                 printf("ipfw sysctl: missing value\n\n");
251                                 return 0;
252                         }
253                         *s = '\0';
254                         i = strtol(s+1, NULL, 0);
255                         sysctlbyname(av[2], NULL, NULL, &i, sizeof(int));
256                 }
257                 return 0;
258         }
259 #endif
260
261         /* Save arguments for final freeing of memory. */
262         save_av = av;
263
264         optind = optreset = 1;  /* restart getopt() */
265         while ((ch = getopt(ac, av, "abcdefhinNp:qs:STtv")) != -1)
266                 switch (ch) {
267                 case 'a':
268                         do_acct = 1;
269                         break;
270
271                 case 'b':
272                         co.comment_only = 1;
273                         co.do_compact = 1;
274                         break;
275
276                 case 'c':
277                         co.do_compact = 1;
278                         break;
279
280                 case 'd':
281                         co.do_dynamic = 1;
282                         break;
283
284                 case 'e':
285                         co.do_expired = 1;
286                         break;
287
288                 case 'f':
289                         co.do_force = 1;
290                         break;
291
292                 case 'h': /* help */
293                         free(save_av);
294                         help();
295                         break;  /* NOTREACHED */
296
297                 case 'i':
298                         co.do_value_as_ip = 1;
299                         break;
300
301                 case 'n':
302                         co.test_only = 1;
303                         break;
304
305                 case 'N':
306                         co.do_resolv = 1;
307                         break;
308
309                 case 'p':
310                         errx(EX_USAGE, "An absolute pathname must be used "
311                             "with -p option.");
312                         /* NOTREACHED */
313
314                 case 'q':
315                         co.do_quiet = 1;
316                         break;
317
318                 case 's': /* sort */
319                         co.do_sort = atoi(optarg);
320                         break;
321
322                 case 'S':
323                         co.show_sets = 1;
324                         break;
325
326                 case 't':
327                         co.do_time = 1;
328                         break;
329
330                 case 'T':
331                         co.do_time = 2; /* numeric timestamp */
332                         break;
333
334                 case 'v': /* verbose */
335                         co.verbose = 1;
336                         break;
337
338                 default:
339                         free(save_av);
340                         return 1;
341                 }
342
343         ac -= optind;
344         av += optind;
345         NEED1("bad arguments, for usage summary ``ipfw''");
346
347         /*
348          * An undocumented behaviour of ipfw1 was to allow rule numbers first,
349          * e.g. "100 add allow ..." instead of "add 100 allow ...".
350          * In case, swap first and second argument to get the normal form.
351          */
352         if (ac > 1 && isdigit(*av[0])) {
353                 char *p = av[0];
354
355                 av[0] = av[1];
356                 av[1] = p;
357         }
358
359         /*
360          * Optional: pipe, queue or nat.
361          */
362         co.do_nat = 0;
363         co.do_pipe = 0;
364         co.use_set = 0;
365         if (!strncmp(*av, "nat", strlen(*av)))
366                 co.do_nat = 1;
367         else if (!strncmp(*av, "pipe", strlen(*av)))
368                 co.do_pipe = 1;
369         else if (_substrcmp(*av, "queue") == 0)
370                 co.do_pipe = 2;
371         else if (_substrcmp(*av, "flowset") == 0)
372                 co.do_pipe = 2;
373         else if (_substrcmp(*av, "sched") == 0)
374                 co.do_pipe = 3;
375         else if (!strncmp(*av, "set", strlen(*av))) {
376                 if (ac > 1 && isdigit(av[1][0])) {
377                         co.use_set = strtonum(av[1], 0, resvd_set_number,
378                                         &errstr);
379                         if (errstr)
380                                 errx(EX_DATAERR,
381                                     "invalid set number %s\n", av[1]);
382                         ac -= 2; av += 2; co.use_set++;
383                 }
384         }
385
386         if (co.do_pipe || co.do_nat) {
387                 ac--;
388                 av++;
389         }
390         NEED1("missing command");
391
392         /*
393          * For pipes, queues and nats we normally say 'nat|pipe NN config'
394          * but the code is easier to parse as 'nat|pipe config NN'
395          * so we swap the two arguments.
396          */
397         if ((co.do_pipe || co.do_nat) && ac > 1 && isdigit(*av[0])) {
398                 char *p = av[0];
399
400                 av[0] = av[1];
401                 av[1] = p;
402         }
403
404         if (co.use_set == 0) {
405                 if (_substrcmp(*av, "add") == 0)
406                         ipfw_add(av);
407                 else if (co.do_nat && _substrcmp(*av, "show") == 0)
408                         ipfw_show_nat(ac, av);
409                 else if (co.do_pipe && _substrcmp(*av, "config") == 0)
410                         ipfw_config_pipe(ac, av);
411                 else if (co.do_nat && _substrcmp(*av, "config") == 0)
412                         ipfw_config_nat(ac, av);
413                 else if (_substrcmp(*av, "set") == 0)
414                         ipfw_sets_handler(av);
415                 else if (_substrcmp(*av, "table") == 0)
416                         ipfw_table_handler(ac, av);
417                 else if (_substrcmp(*av, "enable") == 0)
418                         ipfw_sysctl_handler(av, 1);
419                 else if (_substrcmp(*av, "disable") == 0)
420                         ipfw_sysctl_handler(av, 0);
421                 else
422                         try_next = 1;
423         }
424
425         if (co.use_set || try_next) {
426                 if (_substrcmp(*av, "delete") == 0)
427                         ipfw_delete(av);
428                 else if (_substrcmp(*av, "flush") == 0)
429                         ipfw_flush(co.do_force);
430                 else if (_substrcmp(*av, "zero") == 0)
431                         ipfw_zero(ac, av, 0 /* IP_FW_ZERO */);
432                 else if (_substrcmp(*av, "resetlog") == 0)
433                         ipfw_zero(ac, av, 1 /* IP_FW_RESETLOG */);
434                 else if (_substrcmp(*av, "print") == 0 ||
435                          _substrcmp(*av, "list") == 0)
436                         ipfw_list(ac, av, do_acct);
437                 else if (_substrcmp(*av, "show") == 0)
438                         ipfw_list(ac, av, 1 /* show counters */);
439                 else
440                         errx(EX_USAGE, "bad command `%s'", *av);
441         }
442
443         /* Free memory allocated in the argument parsing. */
444         free(save_av);
445         return 0;
446 }
447
448
449 static void
450 ipfw_readfile(int ac, char *av[])
451 {
452 #define MAX_ARGS        32
453         char buf[4096];
454         char *progname = av[0];         /* original program name */
455         const char *cmd = NULL;         /* preprocessor name, if any */
456         const char *filename = av[ac-1]; /* file to read */
457         int     c, lineno=0;
458         FILE    *f = NULL;
459         pid_t   preproc = 0;
460
461         while ((c = getopt(ac, av, "cfNnp:qS")) != -1) {
462                 switch(c) {
463                 case 'c':
464                         co.do_compact = 1;
465                         break;
466
467                 case 'f':
468                         co.do_force = 1;
469                         break;
470
471                 case 'N':
472                         co.do_resolv = 1;
473                         break;
474
475                 case 'n':
476                         co.test_only = 1;
477                         break;
478
479                 case 'p':
480                         /*
481                          * ipfw -p cmd [args] filename
482                          *
483                          * We are done with getopt(). All arguments
484                          * except the filename go to the preprocessor,
485                          * so we need to do the following:
486                          * - check that a filename is actually present;
487                          * - advance av by optind-1 to skip arguments
488                          *   already processed;
489                          * - decrease ac by optind, to remove the args
490                          *   already processed and the final filename;
491                          * - set the last entry in av[] to NULL so
492                          *   popen() can detect the end of the array;
493                          * - set optind=ac to let getopt() terminate.
494                          */
495                         if (optind == ac)
496                                 errx(EX_USAGE, "no filename argument");
497                         cmd = optarg;
498                         av[ac-1] = NULL;
499                         av += optind - 1;
500                         ac -= optind;
501                         optind = ac;
502                         break;
503
504                 case 'q':
505                         co.do_quiet = 1;
506                         break;
507
508                 case 'S':
509                         co.show_sets = 1;
510                         break;
511
512                 default:
513                         errx(EX_USAGE, "bad arguments, for usage"
514                              " summary ``ipfw''");
515                 }
516
517         }
518
519         if (cmd == NULL && ac != optind + 1)
520                 errx(EX_USAGE, "extraneous filename arguments %s", av[ac-1]);
521
522         if ((f = fopen(filename, "r")) == NULL)
523                 err(EX_UNAVAILABLE, "fopen: %s", filename);
524
525         if (cmd != NULL) {                      /* pipe through preprocessor */
526                 int pipedes[2];
527
528                 if (pipe(pipedes) == -1)
529                         err(EX_OSERR, "cannot create pipe");
530
531                 preproc = fork();
532                 if (preproc == -1)
533                         err(EX_OSERR, "cannot fork");
534
535                 if (preproc == 0) {
536                         /*
537                          * Child, will run the preprocessor with the
538                          * file on stdin and the pipe on stdout.
539                          */
540                         if (dup2(fileno(f), 0) == -1
541                             || dup2(pipedes[1], 1) == -1)
542                                 err(EX_OSERR, "dup2()");
543                         fclose(f);
544                         close(pipedes[1]);
545                         close(pipedes[0]);
546                         execvp(cmd, av);
547                         err(EX_OSERR, "execvp(%s) failed", cmd);
548                 } else { /* parent, will reopen f as the pipe */
549                         fclose(f);
550                         close(pipedes[1]);
551                         if ((f = fdopen(pipedes[0], "r")) == NULL) {
552                                 int savederrno = errno;
553
554                                 (void)kill(preproc, SIGTERM);
555                                 errno = savederrno;
556                                 err(EX_OSERR, "fdopen()");
557                         }
558                 }
559         }
560
561         while (fgets(buf, sizeof(buf), f)) {            /* read commands */
562                 char linename[20];
563                 char *args[2];
564
565                 lineno++;
566                 snprintf(linename, sizeof(linename), "Line %d", lineno);
567                 setprogname(linename); /* XXX */
568                 args[0] = progname;
569                 args[1] = buf;
570                 ipfw_main(2, args);
571         }
572         fclose(f);
573         if (cmd != NULL) {
574                 int status;
575
576                 if (waitpid(preproc, &status, 0) == -1)
577                         errx(EX_OSERR, "waitpid()");
578                 if (WIFEXITED(status) && WEXITSTATUS(status) != EX_OK)
579                         errx(EX_UNAVAILABLE,
580                             "preprocessor exited with status %d",
581                             WEXITSTATUS(status));
582                 else if (WIFSIGNALED(status))
583                         errx(EX_UNAVAILABLE,
584                             "preprocessor exited with signal %d",
585                             WTERMSIG(status));
586         }
587 }
588
589 int
590 main(int ac, char *av[])
591 {
592 #if defined(_WIN32) && defined(TCC)
593         {
594                 WSADATA wsaData;
595                 int ret=0;
596                 unsigned short wVersionRequested = MAKEWORD(2, 2);
597                 ret = WSAStartup(wVersionRequested, &wsaData);
598                 if (ret != 0) {
599                         /* Tell the user that we could not find a usable */
600                         /* Winsock DLL.                           */
601                         printf("WSAStartup failed with error: %d\n", ret);
602                         return 1;
603                 }
604         }
605 #endif
606         /*
607          * If the last argument is an absolute pathname, interpret it
608          * as a file to be preprocessed.
609          */
610
611         if (ac > 1 && av[ac - 1][0] == '/') {
612                 if (access(av[ac - 1], R_OK) == 0)
613                         ipfw_readfile(ac, av);
614                 else
615                         err(EX_USAGE, "pathname: %s", av[ac - 1]);
616         } else {
617                 if (ipfw_main(ac, av)) {
618                         errx(EX_USAGE,
619                             "usage: ipfw [options]\n"
620                             "do \"ipfw -h\" or \"man ipfw\" for details");
621                 }
622         }
623         return EX_OK;
624 }