]> CyberLeo.Net >> Repos - FreeBSD/releng/10.0.git/blob - sys/arm/conf/ETHERNUT5
- Copy stable/10 (r259064) to releng/10.0 as part of the
[FreeBSD/releng/10.0.git] / sys / arm / conf / ETHERNUT5
1 # Kernel configuration for Ethernut 5 boards
2 #
3 # For more information on this file, please read the config(5) manual page,
4 # and/or the handbook section on Kernel Configuration Files:
5 #
6 #    http://www.FreeBSD.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig-config.html
7 #
8 # The handbook is also available locally in /usr/share/doc/handbook
9 # if you've installed the doc distribution, otherwise always see the
10 # FreeBSD World Wide Web server (http://www.FreeBSD.org/) for the
11 # latest information.
12 #
13 # An exhaustive list of options and more detailed explanations of the
14 # device lines is also present in the ../../conf/NOTES and NOTES files.
15 # If you are in doubt as to the purpose or necessity of a line, check first
16 # in NOTES.
17 #
18 # $FreeBSD$
19
20 ident           ETHERNUT5
21
22 include "../at91/std.ethernut5"
23
24 # To statically compile in device wiring instead of /boot/device.hints
25 hints           "ETHERNUT5.hints"
26
27 #makeoptions    DEBUG=-g                # Build kernel with gdb(1) debug symbols
28
29 options         SCHED_4BSD              # 4BSD scheduler
30 #options        PREEMPTION              # Enable kernel thread preemption
31 options         INET                    # InterNETworking
32 #options        INET6                   # IPv6 communications protocols
33 #options        SCTP                    # Stream Control Transmission Protocol
34 options         FFS                     # Berkeley Fast Filesystem
35 options         SOFTUPDATES             # Enable FFS soft updates support
36 #options        UFS_ACL                 # Support for access control lists
37 options         UFS_DIRHASH             # Improve performance on big directories
38 #options        UFS_GJOURNAL            # Enable gjournal-based UFS journaling
39 #options        MD_ROOT                 # MD is a potential root device
40 options         NFSCL                   # New Network Filesystem Client
41 #options        NFSD                    # New Network Filesystem Server
42 options         NFSLOCKD                # Network Lock Manager
43 options         NFS_ROOT                # NFS usable as /, requires NFSCL
44 #options        MSDOSFS                 # MSDOS Filesystem
45 #options        CD9660                  # ISO 9660 Filesystem
46 #options        PROCFS                  # Process filesystem (requires PSEUDOFS)
47 #options        PSEUDOFS                # Pseudo-filesystem framework
48 #options        GEOM_PART_GPT           # GUID Partition Tables.
49 #options        GEOM_LABEL              # Provides labelization
50 #options        COMPAT_FREEBSD5         # Compatible with FreeBSD5
51 #options        COMPAT_FREEBSD6         # Compatible with FreeBSD6
52 #options        COMPAT_FREEBSD7         # Compatible with FreeBSD7
53 options         SCSI_DELAY=5000         # Delay (in ms) before probing SCSI
54 options         KTRACE                  # ktrace(1) support
55 #options        STACK                   # stack(9) support
56 options         SYSVSHM                 # SYSV-style shared memory
57 options         SYSVMSG                 # SYSV-style message queues
58 options         SYSVSEM                 # SYSV-style semaphores
59 options         _KPOSIX_PRIORITY_SCHEDULING # POSIX P1003_1B real-time extensions
60 options         PRINTF_BUFR_SIZE=128    # Prevent printf output being interspersed.
61 #options        HWPMC_HOOKS             # Necessary kernel hooks for hwpmc(4)
62 #options        AUDIT                   # Security event auditing
63 #options        CAPABILITY_MODE         # Capsicum capability mode
64 #options        CAPABILITIES            # Capsicum capabilities
65 #options        MAC                     # TrustedBSD MAC Framework
66 #options        INCLUDE_CONFIG_FILE     # Include this file in kernel
67
68 # required for netbooting
69 options         BOOTP
70 options         BOOTP_COMPAT
71 options         BOOTP_NFSROOT
72 options         BOOTP_NFSV3
73 options         BOOTP_WIRED_TO=ate0
74
75 # alternatively, boot from a MMC/SD memory card
76 #options        ROOTDEVNAME=\"ufs:/dev/mmcsd0a\"
77
78 # kernel/memory size reduction
79 options         MUTEX_NOINLINE
80 options         NO_FFS_SNAPSHOT
81 options         NO_SWAPPING
82 options         NO_SYSCTL_DESCR
83 options         RWLOCK_NOINLINE
84
85 # Debugging support.  Always need this:
86 #options        KDB                     # Enable kernel debugger support.
87 # For minimum debugger support (stable branch) use:
88 #options        KDB_TRACE               # Print a stack trace for a panic.
89 # For full debugger support use this instead:
90 #options        DDB                     # Support DDB.
91 #options        GDB                     # Support remote GDB.
92 #options        DEADLKRES               # Enable the deadlock resolver
93 #options        INVARIANTS              # Enable calls of extra sanity checking
94 #options        INVARIANT_SUPPORT       # Extra sanity checks of internal structures, required by INVARIANTS
95 #options        WITNESS                 # Enable checks to detect deadlocks and cycles
96 #options        WITNESS_SKIPSPIN        # Don't run witness on spinlocks for speed
97 #options        MALLOC_DEBUG_MAXZONES=8 # Separate malloc(9) zones
98
99 # The `bpf' device enables the Berkeley Packet Filter.
100 # Be aware of the administrative consequences of enabling this!
101 # Note that 'bpf' is required for DHCP.
102 device          bpf             # Berkeley packet filter
103
104 # Ethernet
105 device          mii             # Minimal MII support
106 device          ate             # Atmel AT91 Ethernet driver
107
108 # I2C
109 device          at91_twi        # Atmel AT91 Two-wire Interface
110 device          iic             # I2C generic I/O device driver
111 device          iicbus          # I2C bus system
112 device          pcf8563         # NXP PCF8563 clock/calendar
113
114 # MMC/SD
115 device          at91_mci        # Atmel AT91 Multimedia Card Interface
116 options         AT91_MCI_HAS_4WIRE
117 device          mmc             # MMC/SD bus
118 device          mmcsd           # MMC/SD memory card
119
120 # DataFlash
121 device          at91_spi        # Atmel AT91 Serial Peripheral Interface
122 device          spibus          # SPI bus
123 device          at45d           # Atmel AT45D
124 device          geom_map        # GEOM partition mapping
125
126 # Pseudo devices.
127 device          loop            # Network loopback
128 device          random          # Entropy device
129 device          ether           # Ethernet support
130 #device         vlan            # 802.1Q VLAN support
131 #device         tun             # Packet tunnel.
132 #device         md              # Memory "disks"
133 #device         gif             # IPv6 and IPv4 tunneling
134 #device         faith           # IPv6-to-IPv4 relaying (translation)
135 #device         firmware        # firmware assist module
136
137 # SCSI peripherals
138 #device         scbus           # SCSI bus (required for ATA/SCSI)
139 #device         ch              # SCSI media changers
140 #device         da              # Direct Access (disks)
141 #device         sa              # Sequential Access (tape etc)
142 #device         cd              # CD
143 #device         pass            # Passthrough device (direct ATA/SCSI access)
144 #device         ses             # Enclosure Services (SES and SAF-TE)
145 #device         ctl             # CAM Target Layer
146
147 # Serial (COM) ports
148 device          uart            # Multi-uart driver
149 options         ALT_BREAK_TO_DEBUGGER
150
151 # USB support
152 #options        USB_DEBUG       # enable debug msgs
153 device          ohci            # OHCI USB interface
154 device          usb             # USB Bus (required)
155 #device         umass           # Disks/Mass storage - Requires scbus and da
156
157 # watchdog
158 device          at91_wdt        # Atmel AT91 Watchdog Timer