]> CyberLeo.Net >> Repos - FreeBSD/releng/10.0.git/blob - sys/dev/sound/pci/atiixp.h
- Copy stable/10 (r259064) to releng/10.0 as part of the
[FreeBSD/releng/10.0.git] / sys / dev / sound / pci / atiixp.h
1 /*-
2  * Copyright (c) 2005 Ariff Abdullah <ariff@FreeBSD.org>
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24  * SUCH DAMAGE.
25  *
26  * $FreeBSD$
27  */
28
29 #ifndef _ATIIXP_H_
30 #define _ATIIXP_H_
31
32 /*
33  * Constants, pretty much FreeBSD specific.
34  */
35  
36 /* Number of playback / recording channel */
37 #define ATI_IXP_NPCHAN          1
38 #define ATI_IXP_NRCHAN          1
39 #define ATI_IXP_NCHANS          (ATI_IXP_NPCHAN + ATI_IXP_NRCHAN)
40
41 /*
42  * Maximum segments/descriptors is 256, but 2 for
43  * each channel should be more than enough for us.
44  */
45 #define ATI_IXP_DMA_CHSEGS      2
46 #define ATI_IXP_DMA_CHSEGS_MIN  2
47 #define ATI_IXP_DMA_CHSEGS_MAX  256
48
49 #define ATI_VENDOR_ID           0x1002  /* ATI Technologies */
50
51 #define ATI_IXP_200_ID          0x4341
52 #define ATI_IXP_300_ID          0x4361
53 #define ATI_IXP_400_ID          0x4370
54 #define ATI_IXP_SB600_ID        0x4382
55
56 #define ATI_IXP_BASE_RATE       48000
57
58 /* 
59  * Register definitions for ATI IXP
60  *
61  * References: ALSA snd-atiixp.c , OpenBSD/NetBSD auixp-*.h
62  */
63
64 #define ATI_IXP_CODECS 3
65
66 #define ATI_REG_ISR                     0x00            /* interrupt source */
67 #define  ATI_REG_ISR_IN_XRUN            (1U<<0)
68 #define  ATI_REG_ISR_IN_STATUS          (1U<<1)
69 #define  ATI_REG_ISR_OUT_XRUN           (1U<<2)
70 #define  ATI_REG_ISR_OUT_STATUS         (1U<<3)
71 #define  ATI_REG_ISR_SPDF_XRUN          (1U<<4)
72 #define  ATI_REG_ISR_SPDF_STATUS        (1U<<5)
73 #define  ATI_REG_ISR_PHYS_INTR          (1U<<8)
74 #define  ATI_REG_ISR_PHYS_MISMATCH      (1U<<9)
75 #define  ATI_REG_ISR_CODEC0_NOT_READY   (1U<<10)
76 #define  ATI_REG_ISR_CODEC1_NOT_READY   (1U<<11)
77 #define  ATI_REG_ISR_CODEC2_NOT_READY   (1U<<12)
78 #define  ATI_REG_ISR_NEW_FRAME          (1U<<13)
79
80 #define ATI_REG_IER                     0x04            /* interrupt enable */
81 #define  ATI_REG_IER_IN_XRUN_EN         (1U<<0)
82 #define  ATI_REG_IER_IO_STATUS_EN       (1U<<1)
83 #define  ATI_REG_IER_OUT_XRUN_EN        (1U<<2)
84 #define  ATI_REG_IER_OUT_XRUN_COND      (1U<<3)
85 #define  ATI_REG_IER_SPDF_XRUN_EN       (1U<<4)
86 #define  ATI_REG_IER_SPDF_STATUS_EN     (1U<<5)
87 #define  ATI_REG_IER_PHYS_INTR_EN       (1U<<8)
88 #define  ATI_REG_IER_PHYS_MISMATCH_EN   (1U<<9)
89 #define  ATI_REG_IER_CODEC0_INTR_EN     (1U<<10)
90 #define  ATI_REG_IER_CODEC1_INTR_EN     (1U<<11)
91 #define  ATI_REG_IER_CODEC2_INTR_EN     (1U<<12)
92 #define  ATI_REG_IER_NEW_FRAME_EN       (1U<<13)        /* (RO) */
93 #define  ATI_REG_IER_SET_BUS_BUSY       (1U<<14)        /* (WO) audio is running */
94
95 #define ATI_REG_CMD                     0x08            /* command */
96 #define  ATI_REG_CMD_POWERDOWN          (1U<<0)
97 #define  ATI_REG_CMD_RECEIVE_EN         (1U<<1)
98 #define  ATI_REG_CMD_SEND_EN            (1U<<2)
99 #define  ATI_REG_CMD_STATUS_MEM         (1U<<3)
100 #define  ATI_REG_CMD_SPDF_OUT_EN        (1U<<4)
101 #define  ATI_REG_CMD_SPDF_STATUS_MEM    (1U<<5)
102 #define  ATI_REG_CMD_SPDF_THRESHOLD     (3U<<6)
103 #define  ATI_REG_CMD_SPDF_THRESHOLD_SHIFT       6
104 #define  ATI_REG_CMD_IN_DMA_EN          (1U<<8)
105 #define  ATI_REG_CMD_OUT_DMA_EN         (1U<<9)
106 #define  ATI_REG_CMD_SPDF_DMA_EN        (1U<<10)
107 #define  ATI_REG_CMD_SPDF_OUT_STOPPED   (1U<<11)
108 #define  ATI_REG_CMD_SPDF_CONFIG_MASK   (7U<<12)
109 #define   ATI_REG_CMD_SPDF_CONFIG_34    (1U<<12)
110 #define   ATI_REG_CMD_SPDF_CONFIG_78    (2U<<12)
111 #define   ATI_REG_CMD_SPDF_CONFIG_69    (3U<<12)
112 #define   ATI_REG_CMD_SPDF_CONFIG_01    (4U<<12)
113 #define  ATI_REG_CMD_INTERLEAVE_SPDF    (1U<<16)
114 #define  ATI_REG_CMD_AUDIO_PRESENT      (1U<<20)
115 #define  ATI_REG_CMD_INTERLEAVE_IN      (1U<<21)
116 #define  ATI_REG_CMD_INTERLEAVE_OUT     (1U<<22)
117 #define  ATI_REG_CMD_LOOPBACK_EN        (1U<<23)
118 #define  ATI_REG_CMD_PACKED_DIS         (1U<<24)
119 #define  ATI_REG_CMD_BURST_EN           (1U<<25)
120 #define  ATI_REG_CMD_PANIC_EN           (1U<<26)
121 #define  ATI_REG_CMD_MODEM_PRESENT      (1U<<27)
122 #define  ATI_REG_CMD_ACLINK_ACTIVE      (1U<<28)
123 #define  ATI_REG_CMD_AC_SOFT_RESET      (1U<<29)
124 #define  ATI_REG_CMD_AC_SYNC            (1U<<30)
125 #define  ATI_REG_CMD_AC_RESET           (1U<<31)
126
127 #define ATI_REG_PHYS_OUT_ADDR           0x0c
128 #define  ATI_REG_PHYS_OUT_CODEC_MASK    (3U<<0)
129 #define  ATI_REG_PHYS_OUT_RW            (1U<<2)
130 #define  ATI_REG_PHYS_OUT_ADDR_EN       (1U<<8)
131 #define  ATI_REG_PHYS_OUT_ADDR_SHIFT    9
132 #define  ATI_REG_PHYS_OUT_DATA_SHIFT    16
133
134 #define ATI_REG_PHYS_IN_ADDR            0x10
135 #define  ATI_REG_PHYS_IN_READ_FLAG      (1U<<8)
136 #define  ATI_REG_PHYS_IN_ADDR_SHIFT     9
137 #define  ATI_REG_PHYS_IN_DATA_SHIFT     16
138
139 #define ATI_REG_SLOTREQ                 0x14
140
141 #define ATI_REG_COUNTER                 0x18
142 #define  ATI_REG_COUNTER_SLOT           (3U<<0)         /* slot # */
143 #define  ATI_REG_COUNTER_BITCLOCK       (31U<<8)
144
145 #define ATI_REG_IN_FIFO_THRESHOLD       0x1c
146
147 #define ATI_REG_IN_DMA_LINKPTR          0x20
148 #define ATI_REG_IN_DMA_DT_START         0x24            /* RO */
149 #define ATI_REG_IN_DMA_DT_NEXT          0x28            /* RO */
150 #define ATI_REG_IN_DMA_DT_CUR           0x2c            /* RO */
151 #define ATI_REG_IN_DMA_DT_SIZE          0x30
152
153 #define ATI_REG_OUT_DMA_SLOT            0x34
154 #define  ATI_REG_OUT_DMA_SLOT_BIT(x)    (1U << ((x) - 3))
155 #define  ATI_REG_OUT_DMA_SLOT_MASK      0x1ff
156 #define  ATI_REG_OUT_DMA_THRESHOLD_MASK 0xf800
157 #define  ATI_REG_OUT_DMA_THRESHOLD_SHIFT        11
158
159 #define ATI_REG_OUT_DMA_LINKPTR         0x38
160 #define ATI_REG_OUT_DMA_DT_START        0x3c            /* RO */
161 #define ATI_REG_OUT_DMA_DT_NEXT         0x40            /* RO */
162 #define ATI_REG_OUT_DMA_DT_CUR          0x44            /* RO */
163 #define ATI_REG_OUT_DMA_DT_SIZE         0x48
164
165 #define ATI_REG_SPDF_CMD                0x4c
166 #define  ATI_REG_SPDF_CMD_LFSR          (1U<<4)
167 #define  ATI_REG_SPDF_CMD_SINGLE_CH     (1U<<5)
168 #define  ATI_REG_SPDF_CMD_LFSR_ACC      (0xff<<8)       /* RO */
169
170 #define ATI_REG_SPDF_DMA_LINKPTR        0x50
171 #define ATI_REG_SPDF_DMA_DT_START       0x54            /* RO */
172 #define ATI_REG_SPDF_DMA_DT_NEXT        0x58            /* RO */
173 #define ATI_REG_SPDF_DMA_DT_CUR         0x5c            /* RO */
174 #define ATI_REG_SPDF_DMA_DT_SIZE        0x60
175
176 #define ATI_REG_MODEM_MIRROR            0x7c
177 #define ATI_REG_AUDIO_MIRROR            0x80
178
179 #define ATI_REG_6CH_REORDER             0x84            /* reorder slots for 6ch */
180 #define  ATI_REG_6CH_REORDER_EN         (1U<<0)         /* 3,4,7,8,6,9 -> 3,4,6,9,7,8 */
181
182 #define ATI_REG_FIFO_FLUSH              0x88
183 #define  ATI_REG_FIFO_OUT_FLUSH         (1U<<0)
184 #define  ATI_REG_FIFO_IN_FLUSH          (1U<<1)
185
186 /* LINKPTR */
187 #define  ATI_REG_LINKPTR_EN             (1U<<0)
188
189 /* [INT|OUT|SPDIF]_DMA_DT_SIZE */
190 #define  ATI_REG_DMA_DT_SIZE            (0xffffU<<0)
191 #define  ATI_REG_DMA_FIFO_USED          (0x1fU<<16)
192 #define  ATI_REG_DMA_FIFO_FREE          (0x1fU<<21)
193 #define  ATI_REG_DMA_STATE              (7U<<26)
194
195 #define ATI_MAX_DESCRIPTORS     256     /* max number of descriptor packets */
196
197 /* codec detection constant indicating the interrupt flags */
198 #define ALL_CODECS_NOT_READY \
199     (ATI_REG_ISR_CODEC0_NOT_READY | ATI_REG_ISR_CODEC1_NOT_READY |\
200      ATI_REG_ISR_CODEC2_NOT_READY)
201 #define CODEC_CHECK_BITS (ALL_CODECS_NOT_READY|ATI_REG_ISR_NEW_FRAME)
202
203 #endif