sys/dev/usb/serial/umoscom.c

   1 /* $FreeBSD$ */
   2 /*      $OpenBSD: umoscom.c,v 1.2 2006/10/26 06:02:43 jsg Exp $ */
   3
   4 /*
   5  * Copyright (c) 2006 Jonathan Gray <jsg@openbsd.org>
   6  *
   7  * Permission to use, copy, modify, and distribute this software for any
   8  * purpose with or without fee is hereby granted, provided that the above
   9  * copyright notice and this permission notice appear in all copies.
  10  *
  11  * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
  12  * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
  13  * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
  14  * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
  15  * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
  16  * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
  17  * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
  18  */
  19
  20 #include <sys/stdint.h>
  21 #include <sys/stddef.h>
  22 #include <sys/param.h>
  23 #include <sys/queue.h>
  24 #include <sys/types.h>
  25 #include <sys/systm.h>
  26 #include <sys/kernel.h>
  27 #include <sys/bus.h>
  28 #include <sys/module.h>
  29 #include <sys/lock.h>
  30 #include <sys/mutex.h>
  31 #include <sys/condvar.h>
  32 #include <sys/sysctl.h>
  33 #include <sys/sx.h>
  34 #include <sys/unistd.h>
  35 #include <sys/callout.h>
  36 #include <sys/malloc.h>
  37 #include <sys/priv.h>
  38
  39 #include <dev/usb/usb.h>
  40 #include <dev/usb/usbdi.h>
  41 #include <dev/usb/usbdi_util.h>
  42 #include "usbdevs.h"
  43
  44 #define USB_DEBUG_VAR umoscom_debug
  45 #include <dev/usb/usb_debug.h>
  46 #include <dev/usb/usb_process.h>
  47
  48 #include <dev/usb/serial/usb_serial.h>
  49
  50 #ifdef USB_DEBUG
  51 static int umoscom_debug = 0;
  52
  53 static SYSCTL_NODE(_hw_usb, OID_AUTO, umoscom, CTLFLAG_RW, 0, "USB umoscom");
  54 SYSCTL_INT(_hw_usb_umoscom, OID_AUTO, debug, CTLFLAG_RW,
  55     &umoscom_debug, 0, "Debug level");
  56 #endif
  57
  58 #define UMOSCOM_BUFSIZE        1024     /* bytes */
  59
  60 #define UMOSCOM_CONFIG_INDEX    0
  61 #define UMOSCOM_IFACE_INDEX     0
  62
  63 /* interrupt packet */
  64 #define UMOSCOM_IIR_RLS         0x06
  65 #define UMOSCOM_IIR_RDA         0x04
  66 #define UMOSCOM_IIR_CTI         0x0c
  67 #define UMOSCOM_IIR_THR         0x02
  68 #define UMOSCOM_IIR_MS          0x00
  69
  70 /* registers */
  71 #define UMOSCOM_READ            0x0d
  72 #define UMOSCOM_WRITE           0x0e
  73 #define UMOSCOM_UART_REG        0x0300
  74 #define UMOSCOM_VEND_REG        0x0000
  75
  76 #define UMOSCOM_TXBUF           0x00    /* Write */
  77 #define UMOSCOM_RXBUF           0x00    /* Read */
  78 #define UMOSCOM_INT             0x01
  79 #define UMOSCOM_FIFO            0x02    /* Write */
  80 #define UMOSCOM_ISR             0x02    /* Read */
  81 #define UMOSCOM_LCR             0x03
  82 #define UMOSCOM_MCR             0x04
  83 #define UMOSCOM_LSR             0x05
  84 #define UMOSCOM_MSR             0x06
  85 #define UMOSCOM_SCRATCH         0x07
  86 #define UMOSCOM_DIV_LO          0x08
  87 #define UMOSCOM_DIV_HI          0x09
  88 #define UMOSCOM_EFR             0x0a
  89 #define UMOSCOM_XON1            0x0b
  90 #define UMOSCOM_XON2            0x0c
  91 #define UMOSCOM_XOFF1           0x0d
  92 #define UMOSCOM_XOFF2           0x0e
  93
  94 #define UMOSCOM_BAUDLO          0x00
  95 #define UMOSCOM_BAUDHI          0x01
  96
  97 #define UMOSCOM_INT_RXEN        0x01
  98 #define UMOSCOM_INT_TXEN        0x02
  99 #define UMOSCOM_INT_RSEN        0x04
 100 #define UMOSCOM_INT_MDMEM       0x08
 101 #define UMOSCOM_INT_SLEEP       0x10
 102 #define UMOSCOM_INT_XOFF        0x20
 103 #define UMOSCOM_INT_RTS         0x40
 104
 105 #define UMOSCOM_FIFO_EN         0x01
 106 #define UMOSCOM_FIFO_RXCLR      0x02
 107 #define UMOSCOM_FIFO_TXCLR      0x04
 108 #define UMOSCOM_FIFO_DMA_BLK    0x08
 109 #define UMOSCOM_FIFO_TXLVL_MASK 0x30
 110 #define UMOSCOM_FIFO_TXLVL_8    0x00
 111 #define UMOSCOM_FIFO_TXLVL_16   0x10
 112 #define UMOSCOM_FIFO_TXLVL_32   0x20
 113 #define UMOSCOM_FIFO_TXLVL_56   0x30
 114 #define UMOSCOM_FIFO_RXLVL_MASK 0xc0
 115 #define UMOSCOM_FIFO_RXLVL_8    0x00
 116 #define UMOSCOM_FIFO_RXLVL_16   0x40
 117 #define UMOSCOM_FIFO_RXLVL_56   0x80
 118 #define UMOSCOM_FIFO_RXLVL_80   0xc0
 119
 120 #define UMOSCOM_ISR_MDM         0x00
 121 #define UMOSCOM_ISR_NONE        0x01
 122 #define UMOSCOM_ISR_TX          0x02
 123 #define UMOSCOM_ISR_RX          0x04
 124 #define UMOSCOM_ISR_LINE        0x06
 125 #define UMOSCOM_ISR_RXTIMEOUT   0x0c
 126 #define UMOSCOM_ISR_RX_XOFF     0x10
 127 #define UMOSCOM_ISR_RTSCTS      0x20
 128 #define UMOSCOM_ISR_FIFOEN      0xc0
 129
 130 #define UMOSCOM_LCR_DBITS(x)    ((x) - 5)
 131 #define UMOSCOM_LCR_STOP_BITS_1 0x00
 132 #define UMOSCOM_LCR_STOP_BITS_2 0x04    /* 2 if 6-8 bits/char or 1.5 if 5 */
 133 #define UMOSCOM_LCR_PARITY_NONE 0x00
 134 #define UMOSCOM_LCR_PARITY_ODD  0x08
 135 #define UMOSCOM_LCR_PARITY_EVEN 0x18
 136 #define UMOSCOM_LCR_BREAK       0x40
 137 #define UMOSCOM_LCR_DIVLATCH_EN 0x80
 138
 139 #define UMOSCOM_MCR_DTR         0x01
 140 #define UMOSCOM_MCR_RTS         0x02
 141 #define UMOSCOM_MCR_LOOP        0x04
 142 #define UMOSCOM_MCR_INTEN       0x08
 143 #define UMOSCOM_MCR_LOOPBACK    0x10
 144 #define UMOSCOM_MCR_XONANY      0x20
 145 #define UMOSCOM_MCR_IRDA_EN     0x40
 146 #define UMOSCOM_MCR_BAUD_DIV4   0x80
 147
 148 #define UMOSCOM_LSR_RXDATA      0x01
 149 #define UMOSCOM_LSR_RXOVER      0x02
 150 #define UMOSCOM_LSR_RXPAR_ERR   0x04
 151 #define UMOSCOM_LSR_RXFRM_ERR   0x08
 152 #define UMOSCOM_LSR_RXBREAK     0x10
 153 #define UMOSCOM_LSR_TXEMPTY     0x20
 154 #define UMOSCOM_LSR_TXALLEMPTY  0x40
 155 #define UMOSCOM_LSR_TXFIFO_ERR  0x80
 156
 157 #define UMOSCOM_MSR_CTS_CHG     0x01
 158 #define UMOSCOM_MSR_DSR_CHG     0x02
 159 #define UMOSCOM_MSR_RI_CHG      0x04
 160 #define UMOSCOM_MSR_CD_CHG      0x08
 161 #define UMOSCOM_MSR_CTS         0x10
 162 #define UMOSCOM_MSR_RTS         0x20
 163 #define UMOSCOM_MSR_RI          0x40
 164 #define UMOSCOM_MSR_CD          0x80
 165
 166 #define UMOSCOM_BAUD_REF        115200
 167
 168 enum {
 169         UMOSCOM_BULK_DT_WR,
 170         UMOSCOM_BULK_DT_RD,
 171         UMOSCOM_INTR_DT_RD,
 172         UMOSCOM_N_TRANSFER,
 173 };
 174
 175 struct umoscom_softc {
 176         struct ucom_super_softc sc_super_ucom;
 177         struct ucom_softc sc_ucom;
 178
 179         struct usb_xfer *sc_xfer[UMOSCOM_N_TRANSFER];
 180         struct usb_device *sc_udev;
 181         struct mtx sc_mtx;
 182
 183         uint8_t sc_mcr;
 184         uint8_t sc_lcr;
 185 };
 186
 187 /* prototypes */
 188
 189 static device_probe_t umoscom_probe;
 190 static device_attach_t umoscom_attach;
 191 static device_detach_t umoscom_detach;
 192 static void umoscom_free_softc(struct umoscom_softc *);
 193
 194 static usb_callback_t umoscom_write_callback;
 195 static usb_callback_t umoscom_read_callback;
 196 static usb_callback_t umoscom_intr_callback;
 197
 198 static void     umoscom_free(struct ucom_softc *);
 199 static void     umoscom_cfg_open(struct ucom_softc *);
 200 static void     umoscom_cfg_close(struct ucom_softc *);
 201 static void     umoscom_cfg_set_break(struct ucom_softc *, uint8_t);
 202 static void     umoscom_cfg_set_dtr(struct ucom_softc *, uint8_t);
 203 static void     umoscom_cfg_set_rts(struct ucom_softc *, uint8_t);
 204 static int      umoscom_pre_param(struct ucom_softc *, struct termios *);
 205 static void     umoscom_cfg_param(struct ucom_softc *, struct termios *);
 206 static void     umoscom_cfg_get_status(struct ucom_softc *, uint8_t *,
 207                     uint8_t *);
 208 static void     umoscom_cfg_write(struct umoscom_softc *, uint16_t, uint16_t);
 209 static uint8_t  umoscom_cfg_read(struct umoscom_softc *, uint16_t);
 210 static void     umoscom_start_read(struct ucom_softc *);
 211 static void     umoscom_stop_read(struct ucom_softc *);
 212 static void     umoscom_start_write(struct ucom_softc *);
 213 static void     umoscom_stop_write(struct ucom_softc *);
 214 static void     umoscom_poll(struct ucom_softc *ucom);
 215
 216 static const struct usb_config umoscom_config_data[UMOSCOM_N_TRANSFER] = {
 217
 218         [UMOSCOM_BULK_DT_WR] = {
 219                 .type = UE_BULK,
 220                 .endpoint = UE_ADDR_ANY,
 221                 .direction = UE_DIR_OUT,
 222                 .bufsize = UMOSCOM_BUFSIZE,
 223                 .flags = {.pipe_bof = 1,.force_short_xfer = 1,},
 224                 .callback = &umoscom_write_callback,
 225         },
 226
 227         [UMOSCOM_BULK_DT_RD] = {
 228                 .type = UE_BULK,
 229                 .endpoint = UE_ADDR_ANY,
 230                 .direction = UE_DIR_IN,
 231                 .bufsize = UMOSCOM_BUFSIZE,
 232                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
 233                 .callback = &umoscom_read_callback,
 234         },
 235
 236         [UMOSCOM_INTR_DT_RD] = {
 237                 .type = UE_INTERRUPT,
 238                 .endpoint = UE_ADDR_ANY,
 239                 .direction = UE_DIR_IN,
 240                 .flags = {.pipe_bof = 1,.short_xfer_ok = 1,},
 241                 .bufsize = 0,   /* use wMaxPacketSize */
 242                 .callback = &umoscom_intr_callback,
 243         },
 244 };
 245
 246 static const struct ucom_callback umoscom_callback = {
 247         /* configuration callbacks */
 248         .ucom_cfg_get_status = &umoscom_cfg_get_status,
 249         .ucom_cfg_set_dtr = &umoscom_cfg_set_dtr,
 250         .ucom_cfg_set_rts = &umoscom_cfg_set_rts,
 251         .ucom_cfg_set_break = &umoscom_cfg_set_break,
 252         .ucom_cfg_param = &umoscom_cfg_param,
 253         .ucom_cfg_open = &umoscom_cfg_open,
 254         .ucom_cfg_close = &umoscom_cfg_close,
 255
 256         /* other callbacks */
 257         .ucom_pre_param = &umoscom_pre_param,
 258         .ucom_start_read = &umoscom_start_read,
 259         .ucom_stop_read = &umoscom_stop_read,
 260         .ucom_start_write = &umoscom_start_write,
 261         .ucom_stop_write = &umoscom_stop_write,
 262         .ucom_poll = &umoscom_poll,
 263         .ucom_free = &umoscom_free,
 264 };
 265
 266 static device_method_t umoscom_methods[] = {
 267         DEVMETHOD(device_probe, umoscom_probe),
 268         DEVMETHOD(device_attach, umoscom_attach),
 269         DEVMETHOD(device_detach, umoscom_detach),
 270         DEVMETHOD_END
 271 };
 272
 273 static devclass_t umoscom_devclass;
 274
 275 static driver_t umoscom_driver = {
 276         .name = "umoscom",
 277         .methods = umoscom_methods,
 278         .size = sizeof(struct umoscom_softc),
 279 };
 280
 281 DRIVER_MODULE(umoscom, uhub, umoscom_driver, umoscom_devclass, NULL, 0);
 282 MODULE_DEPEND(umoscom, ucom, 1, 1, 1);
 283 MODULE_DEPEND(umoscom, usb, 1, 1, 1);
 284 MODULE_VERSION(umoscom, 1);
 285
 286 static const STRUCT_USB_HOST_ID umoscom_devs[] = {
 287         {USB_VPI(USB_VENDOR_MOSCHIP, USB_PRODUCT_MOSCHIP_MCS7703, 0)}
 288 };
 289
 290 static int
 291 umoscom_probe(device_t dev)
 292 {
 293         struct usb_attach_arg *uaa = device_get_ivars(dev);
 294
 295         if (uaa->usb_mode != USB_MODE_HOST) {
 296                 return (ENXIO);
 297         }
 298         if (uaa->info.bConfigIndex != UMOSCOM_CONFIG_INDEX) {
 299                 return (ENXIO);
 300         }
 301         if (uaa->info.bIfaceIndex != UMOSCOM_IFACE_INDEX) {
 302                 return (ENXIO);
 303         }
 304         return (usbd_lookup_id_by_uaa(umoscom_devs, sizeof(umoscom_devs), uaa));
 305 }
 306
 307 static int
 308 umoscom_attach(device_t dev)
 309 {
 310         struct usb_attach_arg *uaa = device_get_ivars(dev);
 311         struct umoscom_softc *sc = device_get_softc(dev);
 312         int error;
 313         uint8_t iface_index;
 314
 315         sc->sc_udev = uaa->device;
 316         sc->sc_mcr = 0x08;              /* enable interrupts */
 317
 318         /* XXX the device doesn't provide any ID string, so set a static one */
 319         device_set_desc(dev, "MOSCHIP USB Serial Port Adapter");
 320         device_printf(dev, "<MOSCHIP USB Serial Port Adapter>\n");
 321
 322         mtx_init(&sc->sc_mtx, "umoscom", NULL, MTX_DEF);
 323         ucom_ref(&sc->sc_super_ucom);
 324
 325         iface_index = UMOSCOM_IFACE_INDEX;
 326         error = usbd_transfer_setup(uaa->device, &iface_index,
 327             sc->sc_xfer, umoscom_config_data,
 328             UMOSCOM_N_TRANSFER, sc, &sc->sc_mtx);
 329
 330         if (error) {
 331                 goto detach;
 332         }
 333         /* clear stall at first run */
 334         mtx_lock(&sc->sc_mtx);
 335         usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_WR]);
 336         usbd_xfer_set_stall(sc->sc_xfer[UMOSCOM_BULK_DT_RD]);
 337         mtx_unlock(&sc->sc_mtx);
 338
 339         error = ucom_attach(&sc->sc_super_ucom, &sc->sc_ucom, 1, sc,
 340             &umoscom_callback, &sc->sc_mtx);
 341         if (error) {
 342                 goto detach;
 343         }
 344         ucom_set_pnpinfo_usb(&sc->sc_super_ucom, dev);
 345
 346         return (0);
 347
 348 detach:
 349         device_printf(dev, "attach error: %s\n", usbd_errstr(error));
 350         umoscom_detach(dev);
 351         return (ENXIO);
 352 }
 353
 354 static int
 355 umoscom_detach(device_t dev)
 356 {
 357         struct umoscom_softc *sc = device_get_softc(dev);
 358
 359         ucom_detach(&sc->sc_super_ucom, &sc->sc_ucom);
 360         usbd_transfer_unsetup(sc->sc_xfer, UMOSCOM_N_TRANSFER);
 361
 362         device_claim_softc(dev);
 363
 364         umoscom_free_softc(sc);
 365
 366         return (0);
 367 }
 368
 369 UCOM_UNLOAD_DRAIN(umoscom);
 370
 371 static void
 372 umoscom_free_softc(struct umoscom_softc *sc)
 373 {
 374         if (ucom_unref(&sc->sc_super_ucom)) {
 375                 mtx_destroy(&sc->sc_mtx);
 376                 device_free_softc(sc);
 377         }
 378 }
 379
 380 static void
 381 umoscom_free(struct ucom_softc *ucom)
 382 {
 383         umoscom_free_softc(ucom->sc_parent);
 384 }
 385
 386 static void
 387 umoscom_cfg_open(struct ucom_softc *ucom)
 388 {
 389         struct umoscom_softc *sc = ucom->sc_parent;
 390
 391         DPRINTF("\n");
 392
 393         /* Purge FIFOs or odd things happen */
 394         umoscom_cfg_write(sc, UMOSCOM_FIFO, 0x00 | UMOSCOM_UART_REG);
 395
 396         /* Enable FIFO */
 397         umoscom_cfg_write(sc, UMOSCOM_FIFO, UMOSCOM_FIFO_EN |
 398             UMOSCOM_FIFO_RXCLR | UMOSCOM_FIFO_TXCLR |
 399             UMOSCOM_FIFO_DMA_BLK | UMOSCOM_FIFO_RXLVL_MASK |
 400             UMOSCOM_UART_REG);
 401
 402         /* Enable Interrupt Registers */
 403         umoscom_cfg_write(sc, UMOSCOM_INT, 0x0C | UMOSCOM_UART_REG);
 404
 405         /* Magic */
 406         umoscom_cfg_write(sc, 0x01, 0x08);
 407
 408         /* Magic */
 409         umoscom_cfg_write(sc, 0x00, 0x02);
 410 }
 411
 412 static void
 413 umoscom_cfg_close(struct ucom_softc *ucom)
 414 {
 415         return;
 416 }
 417
 418 static void
 419 umoscom_cfg_set_break(struct ucom_softc *ucom, uint8_t onoff)
 420 {
 421         struct umoscom_softc *sc = ucom->sc_parent;
 422         uint16_t val;
 423
 424         val = sc->sc_lcr;
 425         if (onoff)
 426                 val |= UMOSCOM_LCR_BREAK;
 427
 428         umoscom_cfg_write(sc, UMOSCOM_LCR, val | UMOSCOM_UART_REG);
 429 }
 430
 431 static void
 432 umoscom_cfg_set_dtr(struct ucom_softc *ucom, uint8_t onoff)
 433 {
 434         struct umoscom_softc *sc = ucom->sc_parent;
 435
 436         if (onoff)
 437                 sc->sc_mcr |= UMOSCOM_MCR_DTR;
 438         else
 439                 sc->sc_mcr &= ~UMOSCOM_MCR_DTR;
 440
 441         umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG);
 442 }
 443
 444 static void
 445 umoscom_cfg_set_rts(struct ucom_softc *ucom, uint8_t onoff)
 446 {
 447         struct umoscom_softc *sc = ucom->sc_parent;
 448
 449         if (onoff)
 450                 sc->sc_mcr |= UMOSCOM_MCR_RTS;
 451         else
 452                 sc->sc_mcr &= ~UMOSCOM_MCR_RTS;
 453
 454         umoscom_cfg_write(sc, UMOSCOM_MCR, sc->sc_mcr | UMOSCOM_UART_REG);
 455 }
 456
 457 static int
 458 umoscom_pre_param(struct ucom_softc *ucom, struct termios *t)
 459 {
 460         if ((t->c_ospeed <= 1) || (t->c_ospeed > 115200))
 461                 return (EINVAL);
 462
 463         return (0);
 464 }
 465
 466 static void
 467 umoscom_cfg_param(struct ucom_softc *ucom, struct termios *t)
 468 {
 469         struct umoscom_softc *sc = ucom->sc_parent;
 470         uint16_t data;
 471
 472         DPRINTF("speed=%d\n", t->c_ospeed);
 473
 474         data = ((uint32_t)UMOSCOM_BAUD_REF) / ((uint32_t)t->c_ospeed);
 475
 476         if (data == 0) {
 477                 DPRINTF("invalid baud rate!\n");
 478                 return;
 479         }
 480         umoscom_cfg_write(sc, UMOSCOM_LCR,
 481             UMOSCOM_LCR_DIVLATCH_EN | UMOSCOM_UART_REG);
 482
 483         umoscom_cfg_write(sc, UMOSCOM_BAUDLO,
 484             (data & 0xFF) | UMOSCOM_UART_REG);
 485
 486         umoscom_cfg_write(sc, UMOSCOM_BAUDHI,
 487             ((data >> 8) & 0xFF) | UMOSCOM_UART_REG);
 488
 489         if (t->c_cflag & CSTOPB)
 490                 data = UMOSCOM_LCR_STOP_BITS_2;
 491         else
 492                 data = UMOSCOM_LCR_STOP_BITS_1;
 493
 494         if (t->c_cflag & PARENB) {
 495                 if (t->c_cflag & PARODD)
 496                         data |= UMOSCOM_LCR_PARITY_ODD;
 497                 else
 498                         data |= UMOSCOM_LCR_PARITY_EVEN;
 499         } else
 500                 data |= UMOSCOM_LCR_PARITY_NONE;
 501
 502         switch (t->c_cflag & CSIZE) {
 503         case CS5:
 504                 data |= UMOSCOM_LCR_DBITS(5);
 505                 break;
 506         case CS6:
 507                 data |= UMOSCOM_LCR_DBITS(6);
 508                 break;
 509         case CS7:
 510                 data |= UMOSCOM_LCR_DBITS(7);
 511                 break;
 512         case CS8:
 513                 data |= UMOSCOM_LCR_DBITS(8);
 514                 break;
 515         }
 516
 517         sc->sc_lcr = data;
 518         umoscom_cfg_write(sc, UMOSCOM_LCR, data | UMOSCOM_UART_REG);
 519 }
 520
 521 static void
 522 umoscom_cfg_get_status(struct ucom_softc *ucom, uint8_t *p_lsr, uint8_t *p_msr)
 523 {
 524         struct umoscom_softc *sc = ucom->sc_parent;
 525         uint8_t lsr;
 526         uint8_t msr;
 527
 528         DPRINTFN(5, "\n");
 529
 530         /* read status registers */
 531
 532         lsr = umoscom_cfg_read(sc, UMOSCOM_LSR);
 533         msr = umoscom_cfg_read(sc, UMOSCOM_MSR);
 534
 535         /* translate bits */
 536
 537         if (msr & UMOSCOM_MSR_CTS)
 538                 *p_msr |= SER_CTS;
 539
 540         if (msr & UMOSCOM_MSR_CD)
 541                 *p_msr |= SER_DCD;
 542
 543         if (msr & UMOSCOM_MSR_RI)
 544                 *p_msr |= SER_RI;
 545
 546         if (msr & UMOSCOM_MSR_RTS)
 547                 *p_msr |= SER_DSR;
 548 }
 549
 550 static void
 551 umoscom_cfg_write(struct umoscom_softc *sc, uint16_t reg, uint16_t val)
 552 {
 553         struct usb_device_request req;
 554
 555         req.bmRequestType = UT_WRITE_VENDOR_DEVICE;
 556         req.bRequest = UMOSCOM_WRITE;
 557         USETW(req.wValue, val);
 558         USETW(req.wIndex, reg);
 559         USETW(req.wLength, 0);
 560
 561         ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 562             &req, NULL, 0, 1000);
 563 }
 564
 565 static uint8_t
 566 umoscom_cfg_read(struct umoscom_softc *sc, uint16_t reg)
 567 {
 568         struct usb_device_request req;
 569         uint8_t val;
 570
 571         req.bmRequestType = UT_READ_VENDOR_DEVICE;
 572         req.bRequest = UMOSCOM_READ;
 573         USETW(req.wValue, 0);
 574         USETW(req.wIndex, reg);
 575         USETW(req.wLength, 1);
 576
 577         ucom_cfg_do_request(sc->sc_udev, &sc->sc_ucom,
 578             &req, &val, 0, 1000);
 579
 580         DPRINTF("reg=0x%04x, val=0x%02x\n", reg, val);
 581
 582         return (val);
 583 }
 584
 585 static void
 586 umoscom_start_read(struct ucom_softc *ucom)
 587 {
 588         struct umoscom_softc *sc = ucom->sc_parent;
 589
 590 #if 0
 591         /* start interrupt endpoint */
 592         usbd_transfer_start(sc->sc_xfer[UMOSCOM_INTR_DT_RD]);
 593 #endif
 594         /* start read endpoint */
 595         usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_RD]);
 596 }
 597
 598 static void
 599 umoscom_stop_read(struct ucom_softc *ucom)
 600 {
 601         struct umoscom_softc *sc = ucom->sc_parent;
 602
 603         /* stop interrupt transfer */
 604         usbd_transfer_stop(sc->sc_xfer[UMOSCOM_INTR_DT_RD]);
 605
 606         /* stop read endpoint */
 607         usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_RD]);
 608 }
 609
 610 static void
 611 umoscom_start_write(struct ucom_softc *ucom)
 612 {
 613         struct umoscom_softc *sc = ucom->sc_parent;
 614
 615         usbd_transfer_start(sc->sc_xfer[UMOSCOM_BULK_DT_WR]);
 616 }
 617
 618 static void
 619 umoscom_stop_write(struct ucom_softc *ucom)
 620 {
 621         struct umoscom_softc *sc = ucom->sc_parent;
 622
 623         usbd_transfer_stop(sc->sc_xfer[UMOSCOM_BULK_DT_WR]);
 624 }
 625
 626 static void
 627 umoscom_write_callback(struct usb_xfer *xfer, usb_error_t error)
 628 {
 629         struct umoscom_softc *sc = usbd_xfer_softc(xfer);
 630         struct usb_page_cache *pc;
 631         uint32_t actlen;
 632
 633         switch (USB_GET_STATE(xfer)) {
 634         case USB_ST_SETUP:
 635         case USB_ST_TRANSFERRED:
 636 tr_setup:
 637                 DPRINTF("\n");
 638
 639                 pc = usbd_xfer_get_frame(xfer, 0);
 640                 if (ucom_get_data(&sc->sc_ucom, pc, 0,
 641                     UMOSCOM_BUFSIZE, &actlen)) {
 642
 643                         usbd_xfer_set_frame_len(xfer, 0, actlen);
 644                         usbd_transfer_submit(xfer);
 645                 }
 646                 return;
 647
 648         default:                        /* Error */
 649                 if (error != USB_ERR_CANCELLED) {
 650                         DPRINTFN(0, "transfer failed\n");
 651                         /* try to clear stall first */
 652                         usbd_xfer_set_stall(xfer);
 653                         goto tr_setup;
 654                 }
 655                 return;
 656         }
 657 }
 658
 659 static void
 660 umoscom_read_callback(struct usb_xfer *xfer, usb_error_t error)
 661 {
 662         struct umoscom_softc *sc = usbd_xfer_softc(xfer);
 663         struct usb_page_cache *pc;
 664         int actlen;
 665
 666         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
 667
 668         switch (USB_GET_STATE(xfer)) {
 669         case USB_ST_TRANSFERRED:
 670                 DPRINTF("got %d bytes\n", actlen);
 671                 pc = usbd_xfer_get_frame(xfer, 0);
 672                 ucom_put_data(&sc->sc_ucom, pc, 0, actlen);
 673
 674         case USB_ST_SETUP:
 675 tr_setup:
 676                 DPRINTF("\n");
 677
 678                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 679                 usbd_transfer_submit(xfer);
 680                 return;
 681
 682         default:                        /* Error */
 683                 if (error != USB_ERR_CANCELLED) {
 684                         DPRINTFN(0, "transfer failed\n");
 685                         /* try to clear stall first */
 686                         usbd_xfer_set_stall(xfer);
 687                         goto tr_setup;
 688                 }
 689                 return;
 690         }
 691 }
 692
 693 static void
 694 umoscom_intr_callback(struct usb_xfer *xfer, usb_error_t error)
 695 {
 696         struct umoscom_softc *sc = usbd_xfer_softc(xfer);
 697         int actlen;
 698
 699         usbd_xfer_status(xfer, &actlen, NULL, NULL, NULL);
 700
 701         switch (USB_GET_STATE(xfer)) {
 702         case USB_ST_TRANSFERRED:
 703                 if (actlen < 2) {
 704                         DPRINTF("too short message\n");
 705                         goto tr_setup;
 706                 }
 707                 ucom_status_change(&sc->sc_ucom);
 708
 709         case USB_ST_SETUP:
 710 tr_setup:
 711                 usbd_xfer_set_frame_len(xfer, 0, usbd_xfer_max_len(xfer));
 712                 usbd_transfer_submit(xfer);
 713                 return;
 714
 715         default:                        /* Error */
 716                 if (error != USB_ERR_CANCELLED) {
 717                         DPRINTFN(0, "transfer failed\n");
 718                         /* try to clear stall first */
 719                         usbd_xfer_set_stall(xfer);
 720                         goto tr_setup;
 721                 }
 722                 return;
 723         }
 724 }
 725
 726 static void
 727 umoscom_poll(struct ucom_softc *ucom)
 728 {
 729         struct umoscom_softc *sc = ucom->sc_parent;
 730         usbd_transfer_poll(sc->sc_xfer, UMOSCOM_N_TRANSFER);
 731 }