sys/dev/usb/usb_transfer.c

   1 /* $FreeBSD$ */
   2 /*-
   3  * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
   4  *
   5  * Redistribution and use in source and binary forms, with or without
   6  * modification, are permitted provided that the following conditions
   7  * are met:
   8  * 1. Redistributions of source code must retain the above copyright
   9  *    notice, this list of conditions and the following disclaimer.
  10  * 2. Redistributions in binary form must reproduce the above copyright
  11  *    notice, this list of conditions and the following disclaimer in the
  12  *    documentation and/or other materials provided with the distribution.
  13  *
  14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
  15  * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  16  * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
  17  * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
  18  * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  19  * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
  20  * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
  21  * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
  22  * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
  23  * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
  24  * SUCH DAMAGE.
  25  */
  26
  27 #ifdef USB_GLOBAL_INCLUDE_FILE
  28 #include USB_GLOBAL_INCLUDE_FILE
  29 #else
  30 #include <sys/stdint.h>
  31 #include <sys/stddef.h>
  32 #include <sys/param.h>
  33 #include <sys/queue.h>
  34 #include <sys/types.h>
  35 #include <sys/systm.h>
  36 #include <sys/kernel.h>
  37 #include <sys/bus.h>
  38 #include <sys/module.h>
  39 #include <sys/lock.h>
  40 #include <sys/mutex.h>
  41 #include <sys/condvar.h>
  42 #include <sys/sysctl.h>
  43 #include <sys/sx.h>
  44 #include <sys/unistd.h>
  45 #include <sys/callout.h>
  46 #include <sys/malloc.h>
  47 #include <sys/priv.h>
  48 #include <sys/proc.h>
  49
  50 #include <dev/usb/usb.h>
  51 #include <dev/usb/usbdi.h>
  52 #include <dev/usb/usbdi_util.h>
  53
  54 #define USB_DEBUG_VAR usb_debug
  55
  56 #include <dev/usb/usb_core.h>
  57 #include <dev/usb/usb_busdma.h>
  58 #include <dev/usb/usb_process.h>
  59 #include <dev/usb/usb_transfer.h>
  60 #include <dev/usb/usb_device.h>
  61 #include <dev/usb/usb_debug.h>
  62 #include <dev/usb/usb_util.h>
  63
  64 #include <dev/usb/usb_controller.h>
  65 #include <dev/usb/usb_bus.h>
  66 #include <dev/usb/usb_pf.h>
  67 #endif                  /* USB_GLOBAL_INCLUDE_FILE */
  68
  69 struct usb_std_packet_size {
  70         struct {
  71                 uint16_t min;           /* inclusive */
  72                 uint16_t max;           /* inclusive */
  73         }       range;
  74
  75         uint16_t fixed[4];
  76 };
  77
  78 static usb_callback_t usb_request_callback;
  79
  80 static const struct usb_config usb_control_ep_cfg[USB_CTRL_XFER_MAX] = {
  81
  82         /* This transfer is used for generic control endpoint transfers */
  83
  84         [0] = {
  85                 .type = UE_CONTROL,
  86                 .endpoint = 0x00,       /* Control endpoint */
  87                 .direction = UE_DIR_ANY,
  88                 .bufsize = USB_EP0_BUFSIZE,     /* bytes */
  89                 .flags = {.proxy_buffer = 1,},
  90                 .callback = &usb_request_callback,
  91                 .usb_mode = USB_MODE_DUAL,      /* both modes */
  92         },
  93
  94         /* This transfer is used for generic clear stall only */
  95
  96         [1] = {
  97                 .type = UE_CONTROL,
  98                 .endpoint = 0x00,       /* Control pipe */
  99                 .direction = UE_DIR_ANY,
 100                 .bufsize = sizeof(struct usb_device_request),
 101                 .callback = &usb_do_clear_stall_callback,
 102                 .timeout = 1000,        /* 1 second */
 103                 .interval = 50, /* 50ms */
 104                 .usb_mode = USB_MODE_HOST,
 105         },
 106 };
 107
 108 /* function prototypes */
 109
 110 static void     usbd_update_max_frame_size(struct usb_xfer *);
 111 static void     usbd_transfer_unsetup_sub(struct usb_xfer_root *, uint8_t);
 112 static void     usbd_control_transfer_init(struct usb_xfer *);
 113 static int      usbd_setup_ctrl_transfer(struct usb_xfer *);
 114 static void     usb_callback_proc(struct usb_proc_msg *);
 115 static void     usbd_callback_ss_done_defer(struct usb_xfer *);
 116 static void     usbd_callback_wrapper(struct usb_xfer_queue *);
 117 static void     usbd_transfer_start_cb(void *);
 118 static uint8_t  usbd_callback_wrapper_sub(struct usb_xfer *);
 119 static void     usbd_get_std_packet_size(struct usb_std_packet_size *ptr,
 120                     uint8_t type, enum usb_dev_speed speed);
 121
 122 /*------------------------------------------------------------------------*
 123  *      usb_request_callback
 124  *------------------------------------------------------------------------*/
 125 static void
 126 usb_request_callback(struct usb_xfer *xfer, usb_error_t error)
 127 {
 128         if (xfer->flags_int.usb_mode == USB_MODE_DEVICE)
 129                 usb_handle_request_callback(xfer, error);
 130         else
 131                 usbd_do_request_callback(xfer, error);
 132 }
 133
 134 /*------------------------------------------------------------------------*
 135  *      usbd_update_max_frame_size
 136  *
 137  * This function updates the maximum frame size, hence high speed USB
 138  * can transfer multiple consecutive packets.
 139  *------------------------------------------------------------------------*/
 140 static void
 141 usbd_update_max_frame_size(struct usb_xfer *xfer)
 142 {
 143         /* compute maximum frame size */
 144         /* this computation should not overflow 16-bit */
 145         /* max = 15 * 1024 */
 146
 147         xfer->max_frame_size = xfer->max_packet_size * xfer->max_packet_count;
 148 }
 149
 150 /*------------------------------------------------------------------------*
 151  *      usbd_get_dma_delay
 152  *
 153  * The following function is called when we need to
 154  * synchronize with DMA hardware.
 155  *
 156  * Returns:
 157  *    0: no DMA delay required
 158  * Else: milliseconds of DMA delay
 159  *------------------------------------------------------------------------*/
 160 usb_timeout_t
 161 usbd_get_dma_delay(struct usb_device *udev)
 162 {
 163         struct usb_bus_methods *mtod;
 164         uint32_t temp;
 165
 166         mtod = udev->bus->methods;
 167         temp = 0;
 168
 169         if (mtod->get_dma_delay) {
 170                 (mtod->get_dma_delay) (udev, &temp);
 171                 /*
 172                  * Round up and convert to milliseconds. Note that we use
 173                  * 1024 milliseconds per second. to save a division.
 174                  */
 175                 temp += 0x3FF;
 176                 temp /= 0x400;
 177         }
 178         return (temp);
 179 }
 180
 181 /*------------------------------------------------------------------------*
 182  *      usbd_transfer_setup_sub_malloc
 183  *
 184  * This function will allocate one or more DMA'able memory chunks
 185  * according to "size", "align" and "count" arguments. "ppc" is
 186  * pointed to a linear array of USB page caches afterwards.
 187  *
 188  * If the "align" argument is equal to "1" a non-contiguous allocation
 189  * can happen. Else if the "align" argument is greater than "1", the
 190  * allocation will always be contiguous in memory.
 191  *
 192  * Returns:
 193  *    0: Success
 194  * Else: Failure
 195  *------------------------------------------------------------------------*/
 196 #if USB_HAVE_BUSDMA
 197 uint8_t
 198 usbd_transfer_setup_sub_malloc(struct usb_setup_params *parm,
 199     struct usb_page_cache **ppc, usb_size_t size, usb_size_t align,
 200     usb_size_t count)
 201 {
 202         struct usb_page_cache *pc;
 203         struct usb_page *pg;
 204         void *buf;
 205         usb_size_t n_dma_pc;
 206         usb_size_t n_dma_pg;
 207         usb_size_t n_obj;
 208         usb_size_t x;
 209         usb_size_t y;
 210         usb_size_t r;
 211         usb_size_t z;
 212
 213         USB_ASSERT(align > 0, ("Invalid alignment, 0x%08x\n",
 214             align));
 215         USB_ASSERT(size > 0, ("Invalid size = 0\n"));
 216
 217         if (count == 0) {
 218                 return (0);             /* nothing to allocate */
 219         }
 220         /*
 221          * Make sure that the size is aligned properly.
 222          */
 223         size = -((-size) & (-align));
 224
 225         /*
 226          * Try multi-allocation chunks to reduce the number of DMA
 227          * allocations, hence DMA allocations are slow.
 228          */
 229         if (align == 1) {
 230                 /* special case - non-cached multi page DMA memory */
 231                 n_dma_pc = count;
 232                 n_dma_pg = (2 + (size / USB_PAGE_SIZE));
 233                 n_obj = 1;
 234         } else if (size >= USB_PAGE_SIZE) {
 235                 n_dma_pc = count;
 236                 n_dma_pg = 1;
 237                 n_obj = 1;
 238         } else {
 239                 /* compute number of objects per page */
 240                 n_obj = (USB_PAGE_SIZE / size);
 241                 /*
 242                  * Compute number of DMA chunks, rounded up
 243                  * to nearest one:
 244                  */
 245                 n_dma_pc = ((count + n_obj - 1) / n_obj);
 246                 n_dma_pg = 1;
 247         }
 248
 249         /*
 250          * DMA memory is allocated once, but mapped twice. That's why
 251          * there is one list for auto-free and another list for
 252          * non-auto-free which only holds the mapping and not the
 253          * allocation.
 254          */
 255         if (parm->buf == NULL) {
 256                 /* reserve memory (auto-free) */
 257                 parm->dma_page_ptr += n_dma_pc * n_dma_pg;
 258                 parm->dma_page_cache_ptr += n_dma_pc;
 259
 260                 /* reserve memory (no-auto-free) */
 261                 parm->dma_page_ptr += count * n_dma_pg;
 262                 parm->xfer_page_cache_ptr += count;
 263                 return (0);
 264         }
 265         for (x = 0; x != n_dma_pc; x++) {
 266                 /* need to initialize the page cache */
 267                 parm->dma_page_cache_ptr[x].tag_parent =
 268                     &parm->curr_xfer->xroot->dma_parent_tag;
 269         }
 270         for (x = 0; x != count; x++) {
 271                 /* need to initialize the page cache */
 272                 parm->xfer_page_cache_ptr[x].tag_parent =
 273                     &parm->curr_xfer->xroot->dma_parent_tag;
 274         }
 275
 276         if (ppc) {
 277                 *ppc = parm->xfer_page_cache_ptr;
 278         }
 279         r = count;                      /* set remainder count */
 280         z = n_obj * size;               /* set allocation size */
 281         pc = parm->xfer_page_cache_ptr;
 282         pg = parm->dma_page_ptr;
 283
 284         for (x = 0; x != n_dma_pc; x++) {
 285
 286                 if (r < n_obj) {
 287                         /* compute last remainder */
 288                         z = r * size;
 289                         n_obj = r;
 290                 }
 291                 if (usb_pc_alloc_mem(parm->dma_page_cache_ptr,
 292                     pg, z, align)) {
 293                         return (1);     /* failure */
 294                 }
 295                 /* Set beginning of current buffer */
 296                 buf = parm->dma_page_cache_ptr->buffer;
 297                 /* Make room for one DMA page cache and one page */
 298                 parm->dma_page_cache_ptr++;
 299                 pg += n_dma_pg;
 300
 301                 for (y = 0; (y != n_obj); y++, r--, pc++, pg += n_dma_pg) {
 302
 303                         /* Load sub-chunk into DMA */
 304                         if (usb_pc_dmamap_create(pc, size)) {
 305                                 return (1);     /* failure */
 306                         }
 307                         pc->buffer = USB_ADD_BYTES(buf, y * size);
 308                         pc->page_start = pg;
 309
 310                         mtx_lock(pc->tag_parent->mtx);
 311                         if (usb_pc_load_mem(pc, size, 1 /* synchronous */ )) {
 312                                 mtx_unlock(pc->tag_parent->mtx);
 313                                 return (1);     /* failure */
 314                         }
 315                         mtx_unlock(pc->tag_parent->mtx);
 316                 }
 317         }
 318
 319         parm->xfer_page_cache_ptr = pc;
 320         parm->dma_page_ptr = pg;
 321         return (0);
 322 }
 323 #endif
 324
 325 /*------------------------------------------------------------------------*
 326  *      usbd_transfer_setup_sub - transfer setup subroutine
 327  *
 328  * This function must be called from the "xfer_setup" callback of the
 329  * USB Host or Device controller driver when setting up an USB
 330  * transfer. This function will setup correct packet sizes, buffer
 331  * sizes, flags and more, that are stored in the "usb_xfer"
 332  * structure.
 333  *------------------------------------------------------------------------*/
 334 void
 335 usbd_transfer_setup_sub(struct usb_setup_params *parm)
 336 {
 337         enum {
 338                 REQ_SIZE = 8,
 339                 MIN_PKT = 8,
 340         };
 341         struct usb_xfer *xfer = parm->curr_xfer;
 342         const struct usb_config *setup = parm->curr_setup;
 343         struct usb_endpoint_ss_comp_descriptor *ecomp;
 344         struct usb_endpoint_descriptor *edesc;
 345         struct usb_std_packet_size std_size;
 346         usb_frcount_t n_frlengths;
 347         usb_frcount_t n_frbuffers;
 348         usb_frcount_t x;
 349         uint8_t type;
 350         uint8_t zmps;
 351
 352         /*
 353          * Sanity check. The following parameters must be initialized before
 354          * calling this function.
 355          */
 356         if ((parm->hc_max_packet_size == 0) ||
 357             (parm->hc_max_packet_count == 0) ||
 358             (parm->hc_max_frame_size == 0)) {
 359                 parm->err = USB_ERR_INVAL;
 360                 goto done;
 361         }
 362         edesc = xfer->endpoint->edesc;
 363         ecomp = xfer->endpoint->ecomp;
 364
 365         type = (edesc->bmAttributes & UE_XFERTYPE);
 366
 367         xfer->flags = setup->flags;
 368         xfer->nframes = setup->frames;
 369         xfer->timeout = setup->timeout;
 370         xfer->callback = setup->callback;
 371         xfer->interval = setup->interval;
 372         xfer->endpointno = edesc->bEndpointAddress;
 373         xfer->max_packet_size = UGETW(edesc->wMaxPacketSize);
 374         xfer->max_packet_count = 1;
 375         /* make a shadow copy: */
 376         xfer->flags_int.usb_mode = parm->udev->flags.usb_mode;
 377
 378         parm->bufsize = setup->bufsize;
 379
 380         switch (parm->speed) {
 381         case USB_SPEED_HIGH:
 382                 switch (type) {
 383                 case UE_ISOCHRONOUS:
 384                 case UE_INTERRUPT:
 385                         xfer->max_packet_count +=
 386                             (xfer->max_packet_size >> 11) & 3;
 387
 388                         /* check for invalid max packet count */
 389                         if (xfer->max_packet_count > 3)
 390                                 xfer->max_packet_count = 3;
 391                         break;
 392                 default:
 393                         break;
 394                 }
 395                 xfer->max_packet_size &= 0x7FF;
 396                 break;
 397         case USB_SPEED_SUPER:
 398                 xfer->max_packet_count += (xfer->max_packet_size >> 11) & 3;
 399
 400                 if (ecomp != NULL)
 401                         xfer->max_packet_count += ecomp->bMaxBurst;
 402
 403                 if ((xfer->max_packet_count == 0) ||
 404                     (xfer->max_packet_count > 16))
 405                         xfer->max_packet_count = 16;
 406
 407                 switch (type) {
 408                 case UE_CONTROL:
 409                         xfer->max_packet_count = 1;
 410                         break;
 411                 case UE_ISOCHRONOUS:
 412                         if (ecomp != NULL) {
 413                                 uint8_t mult;
 414
 415                                 mult = UE_GET_SS_ISO_MULT(
 416                                     ecomp->bmAttributes) + 1;
 417                                 if (mult > 3)
 418                                         mult = 3;
 419
 420                                 xfer->max_packet_count *= mult;
 421                         }
 422                         break;
 423                 default:
 424                         break;
 425                 }
 426                 xfer->max_packet_size &= 0x7FF;
 427                 break;
 428         default:
 429                 break;
 430         }
 431         /* range check "max_packet_count" */
 432
 433         if (xfer->max_packet_count > parm->hc_max_packet_count) {
 434                 xfer->max_packet_count = parm->hc_max_packet_count;
 435         }
 436         /* filter "wMaxPacketSize" according to HC capabilities */
 437
 438         if ((xfer->max_packet_size > parm->hc_max_packet_size) ||
 439             (xfer->max_packet_size == 0)) {
 440                 xfer->max_packet_size = parm->hc_max_packet_size;
 441         }
 442         /* filter "wMaxPacketSize" according to standard sizes */
 443
 444         usbd_get_std_packet_size(&std_size, type, parm->speed);
 445
 446         if (std_size.range.min || std_size.range.max) {
 447
 448                 if (xfer->max_packet_size < std_size.range.min) {
 449                         xfer->max_packet_size = std_size.range.min;
 450                 }
 451                 if (xfer->max_packet_size > std_size.range.max) {
 452                         xfer->max_packet_size = std_size.range.max;
 453                 }
 454         } else {
 455
 456                 if (xfer->max_packet_size >= std_size.fixed[3]) {
 457                         xfer->max_packet_size = std_size.fixed[3];
 458                 } else if (xfer->max_packet_size >= std_size.fixed[2]) {
 459                         xfer->max_packet_size = std_size.fixed[2];
 460                 } else if (xfer->max_packet_size >= std_size.fixed[1]) {
 461                         xfer->max_packet_size = std_size.fixed[1];
 462                 } else {
 463                         /* only one possibility left */
 464                         xfer->max_packet_size = std_size.fixed[0];
 465                 }
 466         }
 467
 468         /* compute "max_frame_size" */
 469
 470         usbd_update_max_frame_size(xfer);
 471
 472         /* check interrupt interval and transfer pre-delay */
 473
 474         if (type == UE_ISOCHRONOUS) {
 475
 476                 uint16_t frame_limit;
 477
 478                 xfer->interval = 0;     /* not used, must be zero */
 479                 xfer->flags_int.isochronous_xfr = 1;    /* set flag */
 480
 481                 if (xfer->timeout == 0) {
 482                         /*
 483                          * set a default timeout in
 484                          * case something goes wrong!
 485                          */
 486                         xfer->timeout = 1000 / 4;
 487                 }
 488                 switch (parm->speed) {
 489                 case USB_SPEED_LOW:
 490                 case USB_SPEED_FULL:
 491                         frame_limit = USB_MAX_FS_ISOC_FRAMES_PER_XFER;
 492                         xfer->fps_shift = 0;
 493                         break;
 494                 default:
 495                         frame_limit = USB_MAX_HS_ISOC_FRAMES_PER_XFER;
 496                         xfer->fps_shift = edesc->bInterval;
 497                         if (xfer->fps_shift > 0)
 498                                 xfer->fps_shift--;
 499                         if (xfer->fps_shift > 3)
 500                                 xfer->fps_shift = 3;
 501                         if (xfer->flags.pre_scale_frames != 0)
 502                                 xfer->nframes <<= (3 - xfer->fps_shift);
 503                         break;
 504                 }
 505
 506                 if (xfer->nframes > frame_limit) {
 507                         /*
 508                          * this is not going to work
 509                          * cross hardware
 510                          */
 511                         parm->err = USB_ERR_INVAL;
 512                         goto done;
 513                 }
 514                 if (xfer->nframes == 0) {
 515                         /*
 516                          * this is not a valid value
 517                          */
 518                         parm->err = USB_ERR_ZERO_NFRAMES;
 519                         goto done;
 520                 }
 521         } else {
 522
 523                 /*
 524                  * If a value is specified use that else check the
 525                  * endpoint descriptor!
 526                  */
 527                 if (type == UE_INTERRUPT) {
 528
 529                         uint32_t temp;
 530
 531                         if (xfer->interval == 0) {
 532
 533                                 xfer->interval = edesc->bInterval;
 534
 535                                 switch (parm->speed) {
 536                                 case USB_SPEED_LOW:
 537                                 case USB_SPEED_FULL:
 538                                         break;
 539                                 default:
 540                                         /* 125us -> 1ms */
 541                                         if (xfer->interval < 4)
 542                                                 xfer->interval = 1;
 543                                         else if (xfer->interval > 16)
 544                                                 xfer->interval = (1 << (16 - 4));
 545                                         else
 546                                                 xfer->interval =
 547                                                     (1 << (xfer->interval - 4));
 548                                         break;
 549                                 }
 550                         }
 551
 552                         if (xfer->interval == 0) {
 553                                 /*
 554                                  * One millisecond is the smallest
 555                                  * interval we support:
 556                                  */
 557                                 xfer->interval = 1;
 558                         }
 559
 560                         xfer->fps_shift = 0;
 561                         temp = 1;
 562
 563                         while ((temp != 0) && (temp < xfer->interval)) {
 564                                 xfer->fps_shift++;
 565                                 temp *= 2;
 566                         }
 567
 568                         switch (parm->speed) {
 569                         case USB_SPEED_LOW:
 570                         case USB_SPEED_FULL:
 571                                 break;
 572                         default:
 573                                 xfer->fps_shift += 3;
 574                                 break;
 575                         }
 576                 }
 577         }
 578
 579         /*
 580          * NOTE: we do not allow "max_packet_size" or "max_frame_size"
 581          * to be equal to zero when setting up USB transfers, hence
 582          * this leads to alot of extra code in the USB kernel.
 583          */
 584
 585         if ((xfer->max_frame_size == 0) ||
 586             (xfer->max_packet_size == 0)) {
 587
 588                 zmps = 1;
 589
 590                 if ((parm->bufsize <= MIN_PKT) &&
 591                     (type != UE_CONTROL) &&
 592                     (type != UE_BULK)) {
 593
 594                         /* workaround */
 595                         xfer->max_packet_size = MIN_PKT;
 596                         xfer->max_packet_count = 1;
 597                         parm->bufsize = 0;      /* automatic setup length */
 598                         usbd_update_max_frame_size(xfer);
 599
 600                 } else {
 601                         parm->err = USB_ERR_ZERO_MAXP;
 602                         goto done;
 603                 }
 604
 605         } else {
 606                 zmps = 0;
 607         }
 608
 609         /*
 610          * check if we should setup a default
 611          * length:
 612          */
 613
 614         if (parm->bufsize == 0) {
 615
 616                 parm->bufsize = xfer->max_frame_size;
 617
 618                 if (type == UE_ISOCHRONOUS) {
 619                         parm->bufsize *= xfer->nframes;
 620                 }
 621         }
 622         /*
 623          * check if we are about to setup a proxy
 624          * type of buffer:
 625          */
 626
 627         if (xfer->flags.proxy_buffer) {
 628
 629                 /* round bufsize up */
 630
 631                 parm->bufsize += (xfer->max_frame_size - 1);
 632
 633                 if (parm->bufsize < xfer->max_frame_size) {
 634                         /* length wrapped around */
 635                         parm->err = USB_ERR_INVAL;
 636                         goto done;
 637                 }
 638                 /* subtract remainder */
 639
 640                 parm->bufsize -= (parm->bufsize % xfer->max_frame_size);
 641
 642                 /* add length of USB device request structure, if any */
 643
 644                 if (type == UE_CONTROL) {
 645                         parm->bufsize += REQ_SIZE;      /* SETUP message */
 646                 }
 647         }
 648         xfer->max_data_length = parm->bufsize;
 649
 650         /* Setup "n_frlengths" and "n_frbuffers" */
 651
 652         if (type == UE_ISOCHRONOUS) {
 653                 n_frlengths = xfer->nframes;
 654                 n_frbuffers = 1;
 655         } else {
 656
 657                 if (type == UE_CONTROL) {
 658                         xfer->flags_int.control_xfr = 1;
 659                         if (xfer->nframes == 0) {
 660                                 if (parm->bufsize <= REQ_SIZE) {
 661                                         /*
 662                                          * there will never be any data
 663                                          * stage
 664                                          */
 665                                         xfer->nframes = 1;
 666                                 } else {
 667                                         xfer->nframes = 2;
 668                                 }
 669                         }
 670                 } else {
 671                         if (xfer->nframes == 0) {
 672                                 xfer->nframes = 1;
 673                         }
 674                 }
 675
 676                 n_frlengths = xfer->nframes;
 677                 n_frbuffers = xfer->nframes;
 678         }
 679
 680         /*
 681          * check if we have room for the
 682          * USB device request structure:
 683          */
 684
 685         if (type == UE_CONTROL) {
 686
 687                 if (xfer->max_data_length < REQ_SIZE) {
 688                         /* length wrapped around or too small bufsize */
 689                         parm->err = USB_ERR_INVAL;
 690                         goto done;
 691                 }
 692                 xfer->max_data_length -= REQ_SIZE;
 693         }
 694         /*
 695          * Setup "frlengths" and shadow "frlengths" for keeping the
 696          * initial frame lengths when a USB transfer is complete. This
 697          * information is useful when computing isochronous offsets.
 698          */
 699         xfer->frlengths = parm->xfer_length_ptr;
 700         parm->xfer_length_ptr += 2 * n_frlengths;
 701
 702         /* setup "frbuffers" */
 703         xfer->frbuffers = parm->xfer_page_cache_ptr;
 704         parm->xfer_page_cache_ptr += n_frbuffers;
 705
 706         /* initialize max frame count */
 707         xfer->max_frame_count = xfer->nframes;
 708
 709         /*
 710          * check if we need to setup
 711          * a local buffer:
 712          */
 713
 714         if (!xfer->flags.ext_buffer) {
 715 #if USB_HAVE_BUSDMA
 716                 struct usb_page_search page_info;
 717                 struct usb_page_cache *pc;
 718
 719                 if (usbd_transfer_setup_sub_malloc(parm,
 720                     &pc, parm->bufsize, 1, 1)) {
 721                         parm->err = USB_ERR_NOMEM;
 722                 } else if (parm->buf != NULL) {
 723
 724                         usbd_get_page(pc, 0, &page_info);
 725
 726                         xfer->local_buffer = page_info.buffer;
 727
 728                         usbd_xfer_set_frame_offset(xfer, 0, 0);
 729
 730                         if ((type == UE_CONTROL) && (n_frbuffers > 1)) {
 731                                 usbd_xfer_set_frame_offset(xfer, REQ_SIZE, 1);
 732                         }
 733                 }
 734 #else
 735                 /* align data */
 736                 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
 737
 738                 if (parm->buf != NULL) {
 739                         xfer->local_buffer =
 740                             USB_ADD_BYTES(parm->buf, parm->size[0]);
 741
 742                         usbd_xfer_set_frame_offset(xfer, 0, 0);
 743
 744                         if ((type == UE_CONTROL) && (n_frbuffers > 1)) {
 745                                 usbd_xfer_set_frame_offset(xfer, REQ_SIZE, 1);
 746                         }
 747                 }
 748                 parm->size[0] += parm->bufsize;
 749
 750                 /* align data again */
 751                 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
 752 #endif
 753         }
 754         /*
 755          * Compute maximum buffer size
 756          */
 757
 758         if (parm->bufsize_max < parm->bufsize) {
 759                 parm->bufsize_max = parm->bufsize;
 760         }
 761 #if USB_HAVE_BUSDMA
 762         if (xfer->flags_int.bdma_enable) {
 763                 /*
 764                  * Setup "dma_page_ptr".
 765                  *
 766                  * Proof for formula below:
 767                  *
 768                  * Assume there are three USB frames having length "a", "b" and
 769                  * "c". These USB frames will at maximum need "z"
 770                  * "usb_page" structures. "z" is given by:
 771                  *
 772                  * z = ((a / USB_PAGE_SIZE) + 2) + ((b / USB_PAGE_SIZE) + 2) +
 773                  * ((c / USB_PAGE_SIZE) + 2);
 774                  *
 775                  * Constraining "a", "b" and "c" like this:
 776                  *
 777                  * (a + b + c) <= parm->bufsize
 778                  *
 779                  * We know that:
 780                  *
 781                  * z <= ((parm->bufsize / USB_PAGE_SIZE) + (3*2));
 782                  *
 783                  * Here is the general formula:
 784                  */
 785                 xfer->dma_page_ptr = parm->dma_page_ptr;
 786                 parm->dma_page_ptr += (2 * n_frbuffers);
 787                 parm->dma_page_ptr += (parm->bufsize / USB_PAGE_SIZE);
 788         }
 789 #endif
 790         if (zmps) {
 791                 /* correct maximum data length */
 792                 xfer->max_data_length = 0;
 793         }
 794         /* subtract USB frame remainder from "hc_max_frame_size" */
 795
 796         xfer->max_hc_frame_size =
 797             (parm->hc_max_frame_size -
 798             (parm->hc_max_frame_size % xfer->max_frame_size));
 799
 800         if (xfer->max_hc_frame_size == 0) {
 801                 parm->err = USB_ERR_INVAL;
 802                 goto done;
 803         }
 804
 805         /* initialize frame buffers */
 806
 807         if (parm->buf) {
 808                 for (x = 0; x != n_frbuffers; x++) {
 809                         xfer->frbuffers[x].tag_parent =
 810                             &xfer->xroot->dma_parent_tag;
 811 #if USB_HAVE_BUSDMA
 812                         if (xfer->flags_int.bdma_enable &&
 813                             (parm->bufsize_max > 0)) {
 814
 815                                 if (usb_pc_dmamap_create(
 816                                     xfer->frbuffers + x,
 817                                     parm->bufsize_max)) {
 818                                         parm->err = USB_ERR_NOMEM;
 819                                         goto done;
 820                                 }
 821                         }
 822 #endif
 823                 }
 824         }
 825 done:
 826         if (parm->err) {
 827                 /*
 828                  * Set some dummy values so that we avoid division by zero:
 829                  */
 830                 xfer->max_hc_frame_size = 1;
 831                 xfer->max_frame_size = 1;
 832                 xfer->max_packet_size = 1;
 833                 xfer->max_data_length = 0;
 834                 xfer->nframes = 0;
 835                 xfer->max_frame_count = 0;
 836         }
 837 }
 838
 839 /*------------------------------------------------------------------------*
 840  *      usbd_transfer_setup - setup an array of USB transfers
 841  *
 842  * NOTE: You must always call "usbd_transfer_unsetup" after calling
 843  * "usbd_transfer_setup" if success was returned.
 844  *
 845  * The idea is that the USB device driver should pre-allocate all its
 846  * transfers by one call to this function.
 847  *
 848  * Return values:
 849  *    0: Success
 850  * Else: Failure
 851  *------------------------------------------------------------------------*/
 852 usb_error_t
 853 usbd_transfer_setup(struct usb_device *udev,
 854     const uint8_t *ifaces, struct usb_xfer **ppxfer,
 855     const struct usb_config *setup_start, uint16_t n_setup,
 856     void *priv_sc, struct mtx *xfer_mtx)
 857 {
 858         const struct usb_config *setup_end = setup_start + n_setup;
 859         const struct usb_config *setup;
 860         struct usb_setup_params *parm;
 861         struct usb_endpoint *ep;
 862         struct usb_xfer_root *info;
 863         struct usb_xfer *xfer;
 864         void *buf = NULL;
 865         usb_error_t error = 0;
 866         uint16_t n;
 867         uint16_t refcount;
 868         uint8_t do_unlock;
 869
 870         WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
 871             "usbd_transfer_setup can sleep!");
 872
 873         /* do some checking first */
 874
 875         if (n_setup == 0) {
 876                 DPRINTFN(6, "setup array has zero length!\n");
 877                 return (USB_ERR_INVAL);
 878         }
 879         if (ifaces == 0) {
 880                 DPRINTFN(6, "ifaces array is NULL!\n");
 881                 return (USB_ERR_INVAL);
 882         }
 883         if (xfer_mtx == NULL) {
 884                 DPRINTFN(6, "using global lock\n");
 885                 xfer_mtx = &Giant;
 886         }
 887
 888         /* more sanity checks */
 889
 890         for (setup = setup_start, n = 0;
 891             setup != setup_end; setup++, n++) {
 892                 if (setup->bufsize == (usb_frlength_t)-1) {
 893                         error = USB_ERR_BAD_BUFSIZE;
 894                         DPRINTF("invalid bufsize\n");
 895                 }
 896                 if (setup->callback == NULL) {
 897                         error = USB_ERR_NO_CALLBACK;
 898                         DPRINTF("no callback\n");
 899                 }
 900                 ppxfer[n] = NULL;
 901         }
 902
 903         if (error)
 904                 return (error);
 905
 906         /* Protect scratch area */
 907         do_unlock = usbd_enum_lock(udev);
 908
 909         refcount = 0;
 910         info = NULL;
 911
 912         parm = &udev->scratch.xfer_setup[0].parm;
 913         memset(parm, 0, sizeof(*parm));
 914
 915         parm->udev = udev;
 916         parm->speed = usbd_get_speed(udev);
 917         parm->hc_max_packet_count = 1;
 918
 919         if (parm->speed >= USB_SPEED_MAX) {
 920                 parm->err = USB_ERR_INVAL;
 921                 goto done;
 922         }
 923         /* setup all transfers */
 924
 925         while (1) {
 926
 927                 if (buf) {
 928                         /*
 929                          * Initialize the "usb_xfer_root" structure,
 930                          * which is common for all our USB transfers.
 931                          */
 932                         info = USB_ADD_BYTES(buf, 0);
 933
 934                         info->memory_base = buf;
 935                         info->memory_size = parm->size[0];
 936
 937 #if USB_HAVE_BUSDMA
 938                         info->dma_page_cache_start = USB_ADD_BYTES(buf, parm->size[4]);
 939                         info->dma_page_cache_end = USB_ADD_BYTES(buf, parm->size[5]);
 940 #endif
 941                         info->xfer_page_cache_start = USB_ADD_BYTES(buf, parm->size[5]);
 942                         info->xfer_page_cache_end = USB_ADD_BYTES(buf, parm->size[2]);
 943
 944                         cv_init(&info->cv_drain, "WDRAIN");
 945
 946                         info->xfer_mtx = xfer_mtx;
 947 #if USB_HAVE_BUSDMA
 948                         usb_dma_tag_setup(&info->dma_parent_tag,
 949                             parm->dma_tag_p, udev->bus->dma_parent_tag[0].tag,
 950                             xfer_mtx, &usb_bdma_done_event, 32, parm->dma_tag_max);
 951 #endif
 952
 953                         info->bus = udev->bus;
 954                         info->udev = udev;
 955
 956                         TAILQ_INIT(&info->done_q.head);
 957                         info->done_q.command = &usbd_callback_wrapper;
 958 #if USB_HAVE_BUSDMA
 959                         TAILQ_INIT(&info->dma_q.head);
 960                         info->dma_q.command = &usb_bdma_work_loop;
 961 #endif
 962                         info->done_m[0].hdr.pm_callback = &usb_callback_proc;
 963                         info->done_m[0].xroot = info;
 964                         info->done_m[1].hdr.pm_callback = &usb_callback_proc;
 965                         info->done_m[1].xroot = info;
 966
 967                         /*
 968                          * In device side mode control endpoint
 969                          * requests need to run from a separate
 970                          * context, else there is a chance of
 971                          * deadlock!
 972                          */
 973                         if (setup_start == usb_control_ep_cfg)
 974                                 info->done_p =
 975                                     USB_BUS_CONTROL_XFER_PROC(udev->bus);
 976                         else if (xfer_mtx == &Giant)
 977                                 info->done_p =
 978                                     USB_BUS_GIANT_PROC(udev->bus);
 979                         else
 980                                 info->done_p =
 981                                     USB_BUS_NON_GIANT_PROC(udev->bus);
 982                 }
 983                 /* reset sizes */
 984
 985                 parm->size[0] = 0;
 986                 parm->buf = buf;
 987                 parm->size[0] += sizeof(info[0]);
 988
 989                 for (setup = setup_start, n = 0;
 990                     setup != setup_end; setup++, n++) {
 991
 992                         /* skip USB transfers without callbacks: */
 993                         if (setup->callback == NULL) {
 994                                 continue;
 995                         }
 996                         /* see if there is a matching endpoint */
 997                         ep = usbd_get_endpoint(udev,
 998                             ifaces[setup->if_index], setup);
 999
1000                         /*
1001                          * Check that the USB PIPE is valid and that
1002                          * the endpoint mode is proper.
1003                          *
1004                          * Make sure we don't allocate a streams
1005                          * transfer when such a combination is not
1006                          * valid.
1007                          */
1008                         if ((ep == NULL) || (ep->methods == NULL) ||
1009                             ((ep->ep_mode != USB_EP_MODE_STREAMS) &&
1010                             (ep->ep_mode != USB_EP_MODE_DEFAULT)) ||
1011                             (setup->stream_id != 0 &&
1012                             (setup->stream_id >= USB_MAX_EP_STREAMS ||
1013                             (ep->ep_mode != USB_EP_MODE_STREAMS)))) {
1014                                 if (setup->flags.no_pipe_ok)
1015                                         continue;
1016                                 if ((setup->usb_mode != USB_MODE_DUAL) &&
1017                                     (setup->usb_mode != udev->flags.usb_mode))
1018                                         continue;
1019                                 parm->err = USB_ERR_NO_PIPE;
1020                                 goto done;
1021                         }
1022
1023                         /* align data properly */
1024                         parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
1025
1026                         /* store current setup pointer */
1027                         parm->curr_setup = setup;
1028
1029                         if (buf) {
1030                                 /*
1031                                  * Common initialization of the
1032                                  * "usb_xfer" structure.
1033                                  */
1034                                 xfer = USB_ADD_BYTES(buf, parm->size[0]);
1035                                 xfer->address = udev->address;
1036                                 xfer->priv_sc = priv_sc;
1037                                 xfer->xroot = info;
1038
1039                                 usb_callout_init_mtx(&xfer->timeout_handle,
1040                                     &udev->bus->bus_mtx, 0);
1041                         } else {
1042                                 /*
1043                                  * Setup a dummy xfer, hence we are
1044                                  * writing to the "usb_xfer"
1045                                  * structure pointed to by "xfer"
1046                                  * before we have allocated any
1047                                  * memory:
1048                                  */
1049                                 xfer = &udev->scratch.xfer_setup[0].dummy;
1050                                 memset(xfer, 0, sizeof(*xfer));
1051                                 refcount++;
1052                         }
1053
1054                         /* set transfer endpoint pointer */
1055                         xfer->endpoint = ep;
1056
1057                         /* set transfer stream ID */
1058                         xfer->stream_id = setup->stream_id;
1059
1060                         parm->size[0] += sizeof(xfer[0]);
1061                         parm->methods = xfer->endpoint->methods;
1062                         parm->curr_xfer = xfer;
1063
1064                         /*
1065                          * Call the Host or Device controller transfer
1066                          * setup routine:
1067                          */
1068                         (udev->bus->methods->xfer_setup) (parm);
1069
1070                         /* check for error */
1071                         if (parm->err)
1072                                 goto done;
1073
1074                         if (buf) {
1075                                 /*
1076                                  * Increment the endpoint refcount. This
1077                                  * basically prevents setting a new
1078                                  * configuration and alternate setting
1079                                  * when USB transfers are in use on
1080                                  * the given interface. Search the USB
1081                                  * code for "endpoint->refcount_alloc" if you
1082                                  * want more information.
1083                                  */
1084                                 USB_BUS_LOCK(info->bus);
1085                                 if (xfer->endpoint->refcount_alloc >= USB_EP_REF_MAX)
1086                                         parm->err = USB_ERR_INVAL;
1087
1088                                 xfer->endpoint->refcount_alloc++;
1089
1090                                 if (xfer->endpoint->refcount_alloc == 0)
1091                                         panic("usbd_transfer_setup(): Refcount wrapped to zero\n");
1092                                 USB_BUS_UNLOCK(info->bus);
1093
1094                                 /*
1095                                  * Whenever we set ppxfer[] then we
1096                                  * also need to increment the
1097                                  * "setup_refcount":
1098                                  */
1099                                 info->setup_refcount++;
1100
1101                                 /*
1102                                  * Transfer is successfully setup and
1103                                  * can be used:
1104                                  */
1105                                 ppxfer[n] = xfer;
1106                         }
1107
1108                         /* check for error */
1109                         if (parm->err)
1110                                 goto done;
1111                 }
1112
1113                 if (buf != NULL || parm->err != 0)
1114                         goto done;
1115
1116                 /* if no transfers, nothing to do */
1117                 if (refcount == 0)
1118                         goto done;
1119
1120                 /* align data properly */
1121                 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
1122
1123                 /* store offset temporarily */
1124                 parm->size[1] = parm->size[0];
1125
1126                 /*
1127                  * The number of DMA tags required depends on
1128                  * the number of endpoints. The current estimate
1129                  * for maximum number of DMA tags per endpoint
1130                  * is three:
1131                  * 1) for loading memory
1132                  * 2) for allocating memory
1133                  * 3) for fixing memory [UHCI]
1134                  */
1135                 parm->dma_tag_max += 3 * MIN(n_setup, USB_EP_MAX);
1136
1137                 /*
1138                  * DMA tags for QH, TD, Data and more.
1139                  */
1140                 parm->dma_tag_max += 8;
1141
1142                 parm->dma_tag_p += parm->dma_tag_max;
1143
1144                 parm->size[0] += ((uint8_t *)parm->dma_tag_p) -
1145                     ((uint8_t *)0);
1146
1147                 /* align data properly */
1148                 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
1149
1150                 /* store offset temporarily */
1151                 parm->size[3] = parm->size[0];
1152
1153                 parm->size[0] += ((uint8_t *)parm->dma_page_ptr) -
1154                     ((uint8_t *)0);
1155
1156                 /* align data properly */
1157                 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
1158
1159                 /* store offset temporarily */
1160                 parm->size[4] = parm->size[0];
1161
1162                 parm->size[0] += ((uint8_t *)parm->dma_page_cache_ptr) -
1163                     ((uint8_t *)0);
1164
1165                 /* store end offset temporarily */
1166                 parm->size[5] = parm->size[0];
1167
1168                 parm->size[0] += ((uint8_t *)parm->xfer_page_cache_ptr) -
1169                     ((uint8_t *)0);
1170
1171                 /* store end offset temporarily */
1172
1173                 parm->size[2] = parm->size[0];
1174
1175                 /* align data properly */
1176                 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
1177
1178                 parm->size[6] = parm->size[0];
1179
1180                 parm->size[0] += ((uint8_t *)parm->xfer_length_ptr) -
1181                     ((uint8_t *)0);
1182
1183                 /* align data properly */
1184                 parm->size[0] += ((-parm->size[0]) & (USB_HOST_ALIGN - 1));
1185
1186                 /* allocate zeroed memory */
1187                 buf = malloc(parm->size[0], M_USB, M_WAITOK | M_ZERO);
1188
1189                 if (buf == NULL) {
1190                         parm->err = USB_ERR_NOMEM;
1191                         DPRINTFN(0, "cannot allocate memory block for "
1192                             "configuration (%d bytes)\n",
1193                             parm->size[0]);
1194                         goto done;
1195                 }
1196                 parm->dma_tag_p = USB_ADD_BYTES(buf, parm->size[1]);
1197                 parm->dma_page_ptr = USB_ADD_BYTES(buf, parm->size[3]);
1198                 parm->dma_page_cache_ptr = USB_ADD_BYTES(buf, parm->size[4]);
1199                 parm->xfer_page_cache_ptr = USB_ADD_BYTES(buf, parm->size[5]);
1200                 parm->xfer_length_ptr = USB_ADD_BYTES(buf, parm->size[6]);
1201         }
1202
1203 done:
1204         if (buf) {
1205                 if (info->setup_refcount == 0) {
1206                         /*
1207                          * "usbd_transfer_unsetup_sub" will unlock
1208                          * the bus mutex before returning !
1209                          */
1210                         USB_BUS_LOCK(info->bus);
1211
1212                         /* something went wrong */
1213                         usbd_transfer_unsetup_sub(info, 0);
1214                 }
1215         }
1216
1217         /* check if any errors happened */
1218         if (parm->err)
1219                 usbd_transfer_unsetup(ppxfer, n_setup);
1220
1221         error = parm->err;
1222
1223         if (do_unlock)
1224                 usbd_enum_unlock(udev);
1225
1226         return (error);
1227 }
1228
1229 /*------------------------------------------------------------------------*
1230  *      usbd_transfer_unsetup_sub - factored out code
1231  *------------------------------------------------------------------------*/
1232 static void
1233 usbd_transfer_unsetup_sub(struct usb_xfer_root *info, uint8_t needs_delay)
1234 {
1235 #if USB_HAVE_BUSDMA
1236         struct usb_page_cache *pc;
1237 #endif
1238
1239         USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED);
1240
1241         /* wait for any outstanding DMA operations */
1242
1243         if (needs_delay) {
1244                 usb_timeout_t temp;
1245                 temp = usbd_get_dma_delay(info->udev);
1246                 if (temp != 0) {
1247                         usb_pause_mtx(&info->bus->bus_mtx,
1248                             USB_MS_TO_TICKS(temp));
1249                 }
1250         }
1251
1252         /* make sure that our done messages are not queued anywhere */
1253         usb_proc_mwait(info->done_p, &info->done_m[0], &info->done_m[1]);
1254
1255         USB_BUS_UNLOCK(info->bus);
1256
1257 #if USB_HAVE_BUSDMA
1258         /* free DMA'able memory, if any */
1259         pc = info->dma_page_cache_start;
1260         while (pc != info->dma_page_cache_end) {
1261                 usb_pc_free_mem(pc);
1262                 pc++;
1263         }
1264
1265         /* free DMA maps in all "xfer->frbuffers" */
1266         pc = info->xfer_page_cache_start;
1267         while (pc != info->xfer_page_cache_end) {
1268                 usb_pc_dmamap_destroy(pc);
1269                 pc++;
1270         }
1271
1272         /* free all DMA tags */
1273         usb_dma_tag_unsetup(&info->dma_parent_tag);
1274 #endif
1275
1276         cv_destroy(&info->cv_drain);
1277
1278         /*
1279          * free the "memory_base" last, hence the "info" structure is
1280          * contained within the "memory_base"!
1281          */
1282         free(info->memory_base, M_USB);
1283 }
1284
1285 /*------------------------------------------------------------------------*
1286  *      usbd_transfer_unsetup - unsetup/free an array of USB transfers
1287  *
1288  * NOTE: All USB transfers in progress will get called back passing
1289  * the error code "USB_ERR_CANCELLED" before this function
1290  * returns.
1291  *------------------------------------------------------------------------*/
1292 void
1293 usbd_transfer_unsetup(struct usb_xfer **pxfer, uint16_t n_setup)
1294 {
1295         struct usb_xfer *xfer;
1296         struct usb_xfer_root *info;
1297         uint8_t needs_delay = 0;
1298
1299         WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
1300             "usbd_transfer_unsetup can sleep!");
1301
1302         while (n_setup--) {
1303                 xfer = pxfer[n_setup];
1304
1305                 if (xfer == NULL)
1306                         continue;
1307
1308                 info = xfer->xroot;
1309
1310                 USB_XFER_LOCK(xfer);
1311                 USB_BUS_LOCK(info->bus);
1312
1313                 /*
1314                  * HINT: when you start/stop a transfer, it might be a
1315                  * good idea to directly use the "pxfer[]" structure:
1316                  *
1317                  * usbd_transfer_start(sc->pxfer[0]);
1318                  * usbd_transfer_stop(sc->pxfer[0]);
1319                  *
1320                  * That way, if your code has many parts that will not
1321                  * stop running under the same lock, in other words
1322                  * "xfer_mtx", the usbd_transfer_start and
1323                  * usbd_transfer_stop functions will simply return
1324                  * when they detect a NULL pointer argument.
1325                  *
1326                  * To avoid any races we clear the "pxfer[]" pointer
1327                  * while holding the private mutex of the driver:
1328                  */
1329                 pxfer[n_setup] = NULL;
1330
1331                 USB_BUS_UNLOCK(info->bus);
1332                 USB_XFER_UNLOCK(xfer);
1333
1334                 usbd_transfer_drain(xfer);
1335
1336 #if USB_HAVE_BUSDMA
1337                 if (xfer->flags_int.bdma_enable)
1338                         needs_delay = 1;
1339 #endif
1340                 /*
1341                  * NOTE: default endpoint does not have an
1342                  * interface, even if endpoint->iface_index == 0
1343                  */
1344                 USB_BUS_LOCK(info->bus);
1345                 xfer->endpoint->refcount_alloc--;
1346                 USB_BUS_UNLOCK(info->bus);
1347
1348                 usb_callout_drain(&xfer->timeout_handle);
1349
1350                 USB_BUS_LOCK(info->bus);
1351
1352                 USB_ASSERT(info->setup_refcount != 0, ("Invalid setup "
1353                     "reference count\n"));
1354
1355                 info->setup_refcount--;
1356
1357                 if (info->setup_refcount == 0) {
1358                         usbd_transfer_unsetup_sub(info,
1359                             needs_delay);
1360                 } else {
1361                         USB_BUS_UNLOCK(info->bus);
1362                 }
1363         }
1364 }
1365
1366 /*------------------------------------------------------------------------*
1367  *      usbd_control_transfer_init - factored out code
1368  *
1369  * In USB Device Mode we have to wait for the SETUP packet which
1370  * containst the "struct usb_device_request" structure, before we can
1371  * transfer any data. In USB Host Mode we already have the SETUP
1372  * packet at the moment the USB transfer is started. This leads us to
1373  * having to setup the USB transfer at two different places in
1374  * time. This function just contains factored out control transfer
1375  * initialisation code, so that we don't duplicate the code.
1376  *------------------------------------------------------------------------*/
1377 static void
1378 usbd_control_transfer_init(struct usb_xfer *xfer)
1379 {
1380         struct usb_device_request req;
1381
1382         /* copy out the USB request header */
1383
1384         usbd_copy_out(xfer->frbuffers, 0, &req, sizeof(req));
1385
1386         /* setup remainder */
1387
1388         xfer->flags_int.control_rem = UGETW(req.wLength);
1389
1390         /* copy direction to endpoint variable */
1391
1392         xfer->endpointno &= ~(UE_DIR_IN | UE_DIR_OUT);
1393         xfer->endpointno |=
1394             (req.bmRequestType & UT_READ) ? UE_DIR_IN : UE_DIR_OUT;
1395 }
1396
1397 /*------------------------------------------------------------------------*
1398  *      usbd_setup_ctrl_transfer
1399  *
1400  * This function handles initialisation of control transfers. Control
1401  * transfers are special in that regard that they can both transmit
1402  * and receive data.
1403  *
1404  * Return values:
1405  *    0: Success
1406  * Else: Failure
1407  *------------------------------------------------------------------------*/
1408 static int
1409 usbd_setup_ctrl_transfer(struct usb_xfer *xfer)
1410 {
1411         usb_frlength_t len;
1412
1413         /* Check for control endpoint stall */
1414         if (xfer->flags.stall_pipe && xfer->flags_int.control_act) {
1415                 /* the control transfer is no longer active */
1416                 xfer->flags_int.control_stall = 1;
1417                 xfer->flags_int.control_act = 0;
1418         } else {
1419                 /* don't stall control transfer by default */
1420                 xfer->flags_int.control_stall = 0;
1421         }
1422
1423         /* Check for invalid number of frames */
1424         if (xfer->nframes > 2) {
1425                 /*
1426                  * If you need to split a control transfer, you
1427                  * have to do one part at a time. Only with
1428                  * non-control transfers you can do multiple
1429                  * parts a time.
1430                  */
1431                 DPRINTFN(0, "Too many frames: %u\n",
1432                     (unsigned int)xfer->nframes);
1433                 goto error;
1434         }
1435
1436         /*
1437          * Check if there is a control
1438          * transfer in progress:
1439          */
1440         if (xfer->flags_int.control_act) {
1441
1442                 if (xfer->flags_int.control_hdr) {
1443
1444                         /* clear send header flag */
1445
1446                         xfer->flags_int.control_hdr = 0;
1447
1448                         /* setup control transfer */
1449                         if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
1450                                 usbd_control_transfer_init(xfer);
1451                         }
1452                 }
1453                 /* get data length */
1454
1455                 len = xfer->sumlen;
1456
1457         } else {
1458
1459                 /* the size of the SETUP structure is hardcoded ! */
1460
1461                 if (xfer->frlengths[0] != sizeof(struct usb_device_request)) {
1462                         DPRINTFN(0, "Wrong framelength %u != %zu\n",
1463                             xfer->frlengths[0], sizeof(struct
1464                             usb_device_request));
1465                         goto error;
1466                 }
1467                 /* check USB mode */
1468                 if (xfer->flags_int.usb_mode == USB_MODE_DEVICE) {
1469
1470                         /* check number of frames */
1471                         if (xfer->nframes != 1) {
1472                                 /*
1473                                  * We need to receive the setup
1474                                  * message first so that we know the
1475                                  * data direction!
1476                                  */
1477                                 DPRINTF("Misconfigured transfer\n");
1478                                 goto error;
1479                         }
1480                         /*
1481                          * Set a dummy "control_rem" value.  This
1482                          * variable will be overwritten later by a
1483                          * call to "usbd_control_transfer_init()" !
1484                          */
1485                         xfer->flags_int.control_rem = 0xFFFF;
1486                 } else {
1487
1488                         /* setup "endpoint" and "control_rem" */
1489
1490                         usbd_control_transfer_init(xfer);
1491                 }
1492
1493                 /* set transfer-header flag */
1494
1495                 xfer->flags_int.control_hdr = 1;
1496
1497                 /* get data length */
1498
1499                 len = (xfer->sumlen - sizeof(struct usb_device_request));
1500         }
1501
1502         /* check if there is a length mismatch */
1503
1504         if (len > xfer->flags_int.control_rem) {
1505                 DPRINTFN(0, "Length (%d) greater than "
1506                     "remaining length (%d)\n", len,
1507                     xfer->flags_int.control_rem);
1508                 goto error;
1509         }
1510         /* check if we are doing a short transfer */
1511
1512         if (xfer->flags.force_short_xfer) {
1513                 xfer->flags_int.control_rem = 0;
1514         } else {
1515                 if ((len != xfer->max_data_length) &&
1516                     (len != xfer->flags_int.control_rem) &&
1517                     (xfer->nframes != 1)) {
1518                         DPRINTFN(0, "Short control transfer without "
1519                             "force_short_xfer set\n");
1520                         goto error;
1521                 }
1522                 xfer->flags_int.control_rem -= len;
1523         }
1524
1525         /* the status part is executed when "control_act" is 0 */
1526
1527         if ((xfer->flags_int.control_rem > 0) ||
1528             (xfer->flags.manual_status)) {
1529                 /* don't execute the STATUS stage yet */
1530                 xfer->flags_int.control_act = 1;
1531
1532                 /* sanity check */
1533                 if ((!xfer->flags_int.control_hdr) &&
1534                     (xfer->nframes == 1)) {
1535                         /*
1536                          * This is not a valid operation!
1537                          */
1538                         DPRINTFN(0, "Invalid parameter "
1539                             "combination\n");
1540                         goto error;
1541                 }
1542         } else {
1543                 /* time to execute the STATUS stage */
1544                 xfer->flags_int.control_act = 0;
1545         }
1546         return (0);                     /* success */
1547
1548 error:
1549         return (1);                     /* failure */
1550 }
1551
1552 /*------------------------------------------------------------------------*
1553  *      usbd_transfer_submit - start USB hardware for the given transfer
1554  *
1555  * This function should only be called from the USB callback.
1556  *------------------------------------------------------------------------*/
1557 void
1558 usbd_transfer_submit(struct usb_xfer *xfer)
1559 {
1560         struct usb_xfer_root *info;
1561         struct usb_bus *bus;
1562         usb_frcount_t x;
1563
1564         info = xfer->xroot;
1565         bus = info->bus;
1566
1567         DPRINTF("xfer=%p, endpoint=%p, nframes=%d, dir=%s\n",
1568             xfer, xfer->endpoint, xfer->nframes, USB_GET_DATA_ISREAD(xfer) ?
1569             "read" : "write");
1570
1571 #ifdef USB_DEBUG
1572         if (USB_DEBUG_VAR > 0) {
1573                 USB_BUS_LOCK(bus);
1574
1575                 usb_dump_endpoint(xfer->endpoint);
1576
1577                 USB_BUS_UNLOCK(bus);
1578         }
1579 #endif
1580
1581         USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
1582         USB_BUS_LOCK_ASSERT(bus, MA_NOTOWNED);
1583
1584         /* Only open the USB transfer once! */
1585         if (!xfer->flags_int.open) {
1586                 xfer->flags_int.open = 1;
1587
1588                 DPRINTF("open\n");
1589
1590                 USB_BUS_LOCK(bus);
1591                 (xfer->endpoint->methods->open) (xfer);
1592                 USB_BUS_UNLOCK(bus);
1593         }
1594         /* set "transferring" flag */
1595         xfer->flags_int.transferring = 1;
1596
1597 #if USB_HAVE_POWERD
1598         /* increment power reference */
1599         usbd_transfer_power_ref(xfer, 1);
1600 #endif
1601         /*
1602          * Check if the transfer is waiting on a queue, most
1603          * frequently the "done_q":
1604          */
1605         if (xfer->wait_queue) {
1606                 USB_BUS_LOCK(bus);
1607                 usbd_transfer_dequeue(xfer);
1608                 USB_BUS_UNLOCK(bus);
1609         }
1610         /* clear "did_dma_delay" flag */
1611         xfer->flags_int.did_dma_delay = 0;
1612
1613         /* clear "did_close" flag */
1614         xfer->flags_int.did_close = 0;
1615
1616 #if USB_HAVE_BUSDMA
1617         /* clear "bdma_setup" flag */
1618         xfer->flags_int.bdma_setup = 0;
1619 #endif
1620         /* by default we cannot cancel any USB transfer immediately */
1621         xfer->flags_int.can_cancel_immed = 0;
1622
1623         /* clear lengths and frame counts by default */
1624         xfer->sumlen = 0;
1625         xfer->actlen = 0;
1626         xfer->aframes = 0;
1627
1628         /* clear any previous errors */
1629         xfer->error = 0;
1630
1631         /* Check if the device is still alive */
1632         if (info->udev->state < USB_STATE_POWERED) {
1633                 USB_BUS_LOCK(bus);
1634                 /*
1635                  * Must return cancelled error code else
1636                  * device drivers can hang.
1637                  */
1638                 usbd_transfer_done(xfer, USB_ERR_CANCELLED);
1639                 USB_BUS_UNLOCK(bus);
1640                 return;
1641         }
1642
1643         /* sanity check */
1644         if (xfer->nframes == 0) {
1645                 if (xfer->flags.stall_pipe) {
1646                         /*
1647                          * Special case - want to stall without transferring
1648                          * any data:
1649                          */
1650                         DPRINTF("xfer=%p nframes=0: stall "
1651                             "or clear stall!\n", xfer);
1652                         USB_BUS_LOCK(bus);
1653                         xfer->flags_int.can_cancel_immed = 1;
1654                         /* start the transfer */
1655                         usb_command_wrapper(&xfer->endpoint->
1656                             endpoint_q[xfer->stream_id], xfer);
1657                         USB_BUS_UNLOCK(bus);
1658                         return;
1659                 }
1660                 USB_BUS_LOCK(bus);
1661                 usbd_transfer_done(xfer, USB_ERR_INVAL);
1662                 USB_BUS_UNLOCK(bus);
1663                 return;
1664         }
1665         /* compute some variables */
1666
1667         for (x = 0; x != xfer->nframes; x++) {
1668                 /* make a copy of the frlenghts[] */
1669                 xfer->frlengths[x + xfer->max_frame_count] = xfer->frlengths[x];
1670                 /* compute total transfer length */
1671                 xfer->sumlen += xfer->frlengths[x];
1672                 if (xfer->sumlen < xfer->frlengths[x]) {
1673                         /* length wrapped around */
1674                         USB_BUS_LOCK(bus);
1675                         usbd_transfer_done(xfer, USB_ERR_INVAL);
1676                         USB_BUS_UNLOCK(bus);
1677                         return;
1678                 }
1679         }
1680
1681         /* clear some internal flags */
1682
1683         xfer->flags_int.short_xfer_ok = 0;
1684         xfer->flags_int.short_frames_ok = 0;
1685
1686         /* check if this is a control transfer */
1687
1688         if (xfer->flags_int.control_xfr) {
1689
1690                 if (usbd_setup_ctrl_transfer(xfer)) {
1691                         USB_BUS_LOCK(bus);
1692                         usbd_transfer_done(xfer, USB_ERR_STALLED);
1693                         USB_BUS_UNLOCK(bus);
1694                         return;
1695                 }
1696         }
1697         /*
1698          * Setup filtered version of some transfer flags,
1699          * in case of data read direction
1700          */
1701         if (USB_GET_DATA_ISREAD(xfer)) {
1702
1703                 if (xfer->flags.short_frames_ok) {
1704                         xfer->flags_int.short_xfer_ok = 1;
1705                         xfer->flags_int.short_frames_ok = 1;
1706                 } else if (xfer->flags.short_xfer_ok) {
1707                         xfer->flags_int.short_xfer_ok = 1;
1708
1709                         /* check for control transfer */
1710                         if (xfer->flags_int.control_xfr) {
1711                                 /*
1712                                  * 1) Control transfers do not support
1713                                  * reception of multiple short USB
1714                                  * frames in host mode and device side
1715                                  * mode, with exception of:
1716                                  *
1717                                  * 2) Due to sometimes buggy device
1718                                  * side firmware we need to do a
1719                                  * STATUS stage in case of short
1720                                  * control transfers in USB host mode.
1721                                  * The STATUS stage then becomes the
1722                                  * "alt_next" to the DATA stage.
1723                                  */
1724                                 xfer->flags_int.short_frames_ok = 1;
1725                         }
1726                 }
1727         }
1728         /*
1729          * Check if BUS-DMA support is enabled and try to load virtual
1730          * buffers into DMA, if any:
1731          */
1732 #if USB_HAVE_BUSDMA
1733         if (xfer->flags_int.bdma_enable) {
1734                 /* insert the USB transfer last in the BUS-DMA queue */
1735                 usb_command_wrapper(&xfer->xroot->dma_q, xfer);
1736                 return;
1737         }
1738 #endif
1739         /*
1740          * Enter the USB transfer into the Host Controller or
1741          * Device Controller schedule:
1742          */
1743         usbd_pipe_enter(xfer);
1744 }
1745
1746 /*------------------------------------------------------------------------*
1747  *      usbd_pipe_enter - factored out code
1748  *------------------------------------------------------------------------*/
1749 void
1750 usbd_pipe_enter(struct usb_xfer *xfer)
1751 {
1752         struct usb_endpoint *ep;
1753
1754         USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
1755
1756         USB_BUS_LOCK(xfer->xroot->bus);
1757
1758         ep = xfer->endpoint;
1759
1760         DPRINTF("enter\n");
1761
1762         /* the transfer can now be cancelled */
1763         xfer->flags_int.can_cancel_immed = 1;
1764
1765         /* enter the transfer */
1766         (ep->methods->enter) (xfer);
1767
1768         /* check for transfer error */
1769         if (xfer->error) {
1770                 /* some error has happened */
1771                 usbd_transfer_done(xfer, 0);
1772                 USB_BUS_UNLOCK(xfer->xroot->bus);
1773                 return;
1774         }
1775
1776         /* start the transfer */
1777         usb_command_wrapper(&ep->endpoint_q[xfer->stream_id], xfer);
1778         USB_BUS_UNLOCK(xfer->xroot->bus);
1779 }
1780
1781 /*------------------------------------------------------------------------*
1782  *      usbd_transfer_start - start an USB transfer
1783  *
1784  * NOTE: Calling this function more than one time will only
1785  *       result in a single transfer start, until the USB transfer
1786  *       completes.
1787  *------------------------------------------------------------------------*/
1788 void
1789 usbd_transfer_start(struct usb_xfer *xfer)
1790 {
1791         if (xfer == NULL) {
1792                 /* transfer is gone */
1793                 return;
1794         }
1795         USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
1796
1797         /* mark the USB transfer started */
1798
1799         if (!xfer->flags_int.started) {
1800                 /* lock the BUS lock to avoid races updating flags_int */
1801                 USB_BUS_LOCK(xfer->xroot->bus);
1802                 xfer->flags_int.started = 1;
1803                 USB_BUS_UNLOCK(xfer->xroot->bus);
1804         }
1805         /* check if the USB transfer callback is already transferring */
1806
1807         if (xfer->flags_int.transferring) {
1808                 return;
1809         }
1810         USB_BUS_LOCK(xfer->xroot->bus);
1811         /* call the USB transfer callback */
1812         usbd_callback_ss_done_defer(xfer);
1813         USB_BUS_UNLOCK(xfer->xroot->bus);
1814 }
1815
1816 /*------------------------------------------------------------------------*
1817  *      usbd_transfer_stop - stop an USB transfer
1818  *
1819  * NOTE: Calling this function more than one time will only
1820  *       result in a single transfer stop.
1821  * NOTE: When this function returns it is not safe to free nor
1822  *       reuse any DMA buffers. See "usbd_transfer_drain()".
1823  *------------------------------------------------------------------------*/
1824 void
1825 usbd_transfer_stop(struct usb_xfer *xfer)
1826 {
1827         struct usb_endpoint *ep;
1828
1829         if (xfer == NULL) {
1830                 /* transfer is gone */
1831                 return;
1832         }
1833         USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
1834
1835         /* check if the USB transfer was ever opened */
1836
1837         if (!xfer->flags_int.open) {
1838                 if (xfer->flags_int.started) {
1839                         /* nothing to do except clearing the "started" flag */
1840                         /* lock the BUS lock to avoid races updating flags_int */
1841                         USB_BUS_LOCK(xfer->xroot->bus);
1842                         xfer->flags_int.started = 0;
1843                         USB_BUS_UNLOCK(xfer->xroot->bus);
1844                 }
1845                 return;
1846         }
1847         /* try to stop the current USB transfer */
1848
1849         USB_BUS_LOCK(xfer->xroot->bus);
1850         /* override any previous error */
1851         xfer->error = USB_ERR_CANCELLED;
1852
1853         /*
1854          * Clear "open" and "started" when both private and USB lock
1855          * is locked so that we don't get a race updating "flags_int"
1856          */
1857         xfer->flags_int.open = 0;
1858         xfer->flags_int.started = 0;
1859
1860         /*
1861          * Check if we can cancel the USB transfer immediately.
1862          */
1863         if (xfer->flags_int.transferring) {
1864                 if (xfer->flags_int.can_cancel_immed &&
1865                     (!xfer->flags_int.did_close)) {
1866                         DPRINTF("close\n");
1867                         /*
1868                          * The following will lead to an USB_ERR_CANCELLED
1869                          * error code being passed to the USB callback.
1870                          */
1871                         (xfer->endpoint->methods->close) (xfer);
1872                         /* only close once */
1873                         xfer->flags_int.did_close = 1;
1874                 } else {
1875                         /* need to wait for the next done callback */
1876                 }
1877         } else {
1878                 DPRINTF("close\n");
1879
1880                 /* close here and now */
1881                 (xfer->endpoint->methods->close) (xfer);
1882
1883                 /*
1884                  * Any additional DMA delay is done by
1885                  * "usbd_transfer_unsetup()".
1886                  */
1887
1888                 /*
1889                  * Special case. Check if we need to restart a blocked
1890                  * endpoint.
1891                  */
1892                 ep = xfer->endpoint;
1893
1894                 /*
1895                  * If the current USB transfer is completing we need
1896                  * to start the next one:
1897                  */
1898                 if (ep->endpoint_q[xfer->stream_id].curr == xfer) {
1899                         usb_command_wrapper(
1900                             &ep->endpoint_q[xfer->stream_id], NULL);
1901                 }
1902         }
1903
1904         USB_BUS_UNLOCK(xfer->xroot->bus);
1905 }
1906
1907 /*------------------------------------------------------------------------*
1908  *      usbd_transfer_pending
1909  *
1910  * This function will check if an USB transfer is pending which is a
1911  * little bit complicated!
1912  * Return values:
1913  * 0: Not pending
1914  * 1: Pending: The USB transfer will receive a callback in the future.
1915  *------------------------------------------------------------------------*/
1916 uint8_t
1917 usbd_transfer_pending(struct usb_xfer *xfer)
1918 {
1919         struct usb_xfer_root *info;
1920         struct usb_xfer_queue *pq;
1921
1922         if (xfer == NULL) {
1923                 /* transfer is gone */
1924                 return (0);
1925         }
1926         USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
1927
1928         if (xfer->flags_int.transferring) {
1929                 /* trivial case */
1930                 return (1);
1931         }
1932         USB_BUS_LOCK(xfer->xroot->bus);
1933         if (xfer->wait_queue) {
1934                 /* we are waiting on a queue somewhere */
1935                 USB_BUS_UNLOCK(xfer->xroot->bus);
1936                 return (1);
1937         }
1938         info = xfer->xroot;
1939         pq = &info->done_q;
1940
1941         if (pq->curr == xfer) {
1942                 /* we are currently scheduled for callback */
1943                 USB_BUS_UNLOCK(xfer->xroot->bus);
1944                 return (1);
1945         }
1946         /* we are not pending */
1947         USB_BUS_UNLOCK(xfer->xroot->bus);
1948         return (0);
1949 }
1950
1951 /*------------------------------------------------------------------------*
1952  *      usbd_transfer_drain
1953  *
1954  * This function will stop the USB transfer and wait for any
1955  * additional BUS-DMA and HW-DMA operations to complete. Buffers that
1956  * are loaded into DMA can safely be freed or reused after that this
1957  * function has returned.
1958  *------------------------------------------------------------------------*/
1959 void
1960 usbd_transfer_drain(struct usb_xfer *xfer)
1961 {
1962         WITNESS_WARN(WARN_GIANTOK | WARN_SLEEPOK, NULL,
1963             "usbd_transfer_drain can sleep!");
1964
1965         if (xfer == NULL) {
1966                 /* transfer is gone */
1967                 return;
1968         }
1969         if (xfer->xroot->xfer_mtx != &Giant) {
1970                 USB_XFER_LOCK_ASSERT(xfer, MA_NOTOWNED);
1971         }
1972         USB_XFER_LOCK(xfer);
1973
1974         usbd_transfer_stop(xfer);
1975
1976         while (usbd_transfer_pending(xfer) ||
1977             xfer->flags_int.doing_callback) {
1978
1979                 /*
1980                  * It is allowed that the callback can drop its
1981                  * transfer mutex. In that case checking only
1982                  * "usbd_transfer_pending()" is not enough to tell if
1983                  * the USB transfer is fully drained. We also need to
1984                  * check the internal "doing_callback" flag.
1985                  */
1986                 xfer->flags_int.draining = 1;
1987
1988                 /*
1989                  * Wait until the current outstanding USB
1990                  * transfer is complete !
1991                  */
1992                 cv_wait(&xfer->xroot->cv_drain, xfer->xroot->xfer_mtx);
1993         }
1994         USB_XFER_UNLOCK(xfer);
1995 }
1996
1997 struct usb_page_cache *
1998 usbd_xfer_get_frame(struct usb_xfer *xfer, usb_frcount_t frindex)
1999 {
2000         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2001
2002         return (&xfer->frbuffers[frindex]);
2003 }
2004
2005 void *
2006 usbd_xfer_get_frame_buffer(struct usb_xfer *xfer, usb_frcount_t frindex)
2007 {
2008         struct usb_page_search page_info;
2009
2010         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2011
2012         usbd_get_page(&xfer->frbuffers[frindex], 0, &page_info);
2013         return (page_info.buffer);
2014 }
2015
2016 /*------------------------------------------------------------------------*
2017  *      usbd_xfer_get_fps_shift
2018  *
2019  * The following function is only useful for isochronous transfers. It
2020  * returns how many times the frame execution rate has been shifted
2021  * down.
2022  *
2023  * Return value:
2024  * Success: 0..3
2025  * Failure: 0
2026  *------------------------------------------------------------------------*/
2027 uint8_t
2028 usbd_xfer_get_fps_shift(struct usb_xfer *xfer)
2029 {
2030         return (xfer->fps_shift);
2031 }
2032
2033 usb_frlength_t
2034 usbd_xfer_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex)
2035 {
2036         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2037
2038         return (xfer->frlengths[frindex]);
2039 }
2040
2041 /*------------------------------------------------------------------------*
2042  *      usbd_xfer_set_frame_data
2043  *
2044  * This function sets the pointer of the buffer that should
2045  * loaded directly into DMA for the given USB frame. Passing "ptr"
2046  * equal to NULL while the corresponding "frlength" is greater
2047  * than zero gives undefined results!
2048  *------------------------------------------------------------------------*/
2049 void
2050 usbd_xfer_set_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
2051     void *ptr, usb_frlength_t len)
2052 {
2053         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2054
2055         /* set virtual address to load and length */
2056         xfer->frbuffers[frindex].buffer = ptr;
2057         usbd_xfer_set_frame_len(xfer, frindex, len);
2058 }
2059
2060 void
2061 usbd_xfer_frame_data(struct usb_xfer *xfer, usb_frcount_t frindex,
2062     void **ptr, int *len)
2063 {
2064         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2065
2066         if (ptr != NULL)
2067                 *ptr = xfer->frbuffers[frindex].buffer;
2068         if (len != NULL)
2069                 *len = xfer->frlengths[frindex];
2070 }
2071
2072 /*------------------------------------------------------------------------*
2073  *      usbd_xfer_old_frame_length
2074  *
2075  * This function returns the framelength of the given frame at the
2076  * time the transfer was submitted. This function can be used to
2077  * compute the starting data pointer of the next isochronous frame
2078  * when an isochronous transfer has completed.
2079  *------------------------------------------------------------------------*/
2080 usb_frlength_t
2081 usbd_xfer_old_frame_length(struct usb_xfer *xfer, usb_frcount_t frindex)
2082 {
2083         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2084
2085         return (xfer->frlengths[frindex + xfer->max_frame_count]);
2086 }
2087
2088 void
2089 usbd_xfer_status(struct usb_xfer *xfer, int *actlen, int *sumlen, int *aframes,
2090     int *nframes)
2091 {
2092         if (actlen != NULL)
2093                 *actlen = xfer->actlen;
2094         if (sumlen != NULL)
2095                 *sumlen = xfer->sumlen;
2096         if (aframes != NULL)
2097                 *aframes = xfer->aframes;
2098         if (nframes != NULL)
2099                 *nframes = xfer->nframes;
2100 }
2101
2102 /*------------------------------------------------------------------------*
2103  *      usbd_xfer_set_frame_offset
2104  *
2105  * This function sets the frame data buffer offset relative to the beginning
2106  * of the USB DMA buffer allocated for this USB transfer.
2107  *------------------------------------------------------------------------*/
2108 void
2109 usbd_xfer_set_frame_offset(struct usb_xfer *xfer, usb_frlength_t offset,
2110     usb_frcount_t frindex)
2111 {
2112         KASSERT(!xfer->flags.ext_buffer, ("Cannot offset data frame "
2113             "when the USB buffer is external\n"));
2114         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2115
2116         /* set virtual address to load */
2117         xfer->frbuffers[frindex].buffer =
2118             USB_ADD_BYTES(xfer->local_buffer, offset);
2119 }
2120
2121 void
2122 usbd_xfer_set_interval(struct usb_xfer *xfer, int i)
2123 {
2124         xfer->interval = i;
2125 }
2126
2127 void
2128 usbd_xfer_set_timeout(struct usb_xfer *xfer, int t)
2129 {
2130         xfer->timeout = t;
2131 }
2132
2133 void
2134 usbd_xfer_set_frames(struct usb_xfer *xfer, usb_frcount_t n)
2135 {
2136         xfer->nframes = n;
2137 }
2138
2139 usb_frcount_t
2140 usbd_xfer_max_frames(struct usb_xfer *xfer)
2141 {
2142         return (xfer->max_frame_count);
2143 }
2144
2145 usb_frlength_t
2146 usbd_xfer_max_len(struct usb_xfer *xfer)
2147 {
2148         return (xfer->max_data_length);
2149 }
2150
2151 usb_frlength_t
2152 usbd_xfer_max_framelen(struct usb_xfer *xfer)
2153 {
2154         return (xfer->max_frame_size);
2155 }
2156
2157 void
2158 usbd_xfer_set_frame_len(struct usb_xfer *xfer, usb_frcount_t frindex,
2159     usb_frlength_t len)
2160 {
2161         KASSERT(frindex < xfer->max_frame_count, ("frame index overflow"));
2162
2163         xfer->frlengths[frindex] = len;
2164 }
2165
2166 /*------------------------------------------------------------------------*
2167  *      usb_callback_proc - factored out code
2168  *
2169  * This function performs USB callbacks.
2170  *------------------------------------------------------------------------*/
2171 static void
2172 usb_callback_proc(struct usb_proc_msg *_pm)
2173 {
2174         struct usb_done_msg *pm = (void *)_pm;
2175         struct usb_xfer_root *info = pm->xroot;
2176
2177         /* Change locking order */
2178         USB_BUS_UNLOCK(info->bus);
2179
2180         /*
2181          * We exploit the fact that the mutex is the same for all
2182          * callbacks that will be called from this thread:
2183          */
2184         mtx_lock(info->xfer_mtx);
2185         USB_BUS_LOCK(info->bus);
2186
2187         /* Continue where we lost track */
2188         usb_command_wrapper(&info->done_q,
2189             info->done_q.curr);
2190
2191         mtx_unlock(info->xfer_mtx);
2192 }
2193
2194 /*------------------------------------------------------------------------*
2195  *      usbd_callback_ss_done_defer
2196  *
2197  * This function will defer the start, stop and done callback to the
2198  * correct thread.
2199  *------------------------------------------------------------------------*/
2200 static void
2201 usbd_callback_ss_done_defer(struct usb_xfer *xfer)
2202 {
2203         struct usb_xfer_root *info = xfer->xroot;
2204         struct usb_xfer_queue *pq = &info->done_q;
2205
2206         USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
2207
2208         if (pq->curr != xfer) {
2209                 usbd_transfer_enqueue(pq, xfer);
2210         }
2211         if (!pq->recurse_1) {
2212
2213                 /*
2214                  * We have to postpone the callback due to the fact we
2215                  * will have a Lock Order Reversal, LOR, if we try to
2216                  * proceed !
2217                  */
2218                 if (usb_proc_msignal(info->done_p,
2219                     &info->done_m[0], &info->done_m[1])) {
2220                         /* ignore */
2221                 }
2222         } else {
2223                 /* clear second recurse flag */
2224                 pq->recurse_2 = 0;
2225         }
2226         return;
2227
2228 }
2229
2230 /*------------------------------------------------------------------------*
2231  *      usbd_callback_wrapper
2232  *
2233  * This is a wrapper for USB callbacks. This wrapper does some
2234  * auto-magic things like figuring out if we can call the callback
2235  * directly from the current context or if we need to wakeup the
2236  * interrupt process.
2237  *------------------------------------------------------------------------*/
2238 static void
2239 usbd_callback_wrapper(struct usb_xfer_queue *pq)
2240 {
2241         struct usb_xfer *xfer = pq->curr;
2242         struct usb_xfer_root *info = xfer->xroot;
2243
2244         USB_BUS_LOCK_ASSERT(info->bus, MA_OWNED);
2245         if (!mtx_owned(info->xfer_mtx) && !SCHEDULER_STOPPED()) {
2246                 /*
2247                  * Cases that end up here:
2248                  *
2249                  * 5) HW interrupt done callback or other source.
2250                  */
2251                 DPRINTFN(3, "case 5\n");
2252
2253                 /*
2254                  * We have to postpone the callback due to the fact we
2255                  * will have a Lock Order Reversal, LOR, if we try to
2256                  * proceed !
2257                  */
2258                 if (usb_proc_msignal(info->done_p,
2259                     &info->done_m[0], &info->done_m[1])) {
2260                         /* ignore */
2261                 }
2262                 return;
2263         }
2264         /*
2265          * Cases that end up here:
2266          *
2267          * 1) We are starting a transfer
2268          * 2) We are prematurely calling back a transfer
2269          * 3) We are stopping a transfer
2270          * 4) We are doing an ordinary callback
2271          */
2272         DPRINTFN(3, "case 1-4\n");
2273         /* get next USB transfer in the queue */
2274         info->done_q.curr = NULL;
2275
2276         /* set flag in case of drain */
2277         xfer->flags_int.doing_callback = 1;
2278
2279         USB_BUS_UNLOCK(info->bus);
2280         USB_BUS_LOCK_ASSERT(info->bus, MA_NOTOWNED);
2281
2282         /* set correct USB state for callback */
2283         if (!xfer->flags_int.transferring) {
2284                 xfer->usb_state = USB_ST_SETUP;
2285                 if (!xfer->flags_int.started) {
2286                         /* we got stopped before we even got started */
2287                         USB_BUS_LOCK(info->bus);
2288                         goto done;
2289                 }
2290         } else {
2291
2292                 if (usbd_callback_wrapper_sub(xfer)) {
2293                         /* the callback has been deferred */
2294                         USB_BUS_LOCK(info->bus);
2295                         goto done;
2296                 }
2297 #if USB_HAVE_POWERD
2298                 /* decrement power reference */
2299                 usbd_transfer_power_ref(xfer, -1);
2300 #endif
2301                 xfer->flags_int.transferring = 0;
2302
2303                 if (xfer->error) {
2304                         xfer->usb_state = USB_ST_ERROR;
2305                 } else {
2306                         /* set transferred state */
2307                         xfer->usb_state = USB_ST_TRANSFERRED;
2308 #if USB_HAVE_BUSDMA
2309                         /* sync DMA memory, if any */
2310                         if (xfer->flags_int.bdma_enable &&
2311                             (!xfer->flags_int.bdma_no_post_sync)) {
2312                                 usb_bdma_post_sync(xfer);
2313                         }
2314 #endif
2315                 }
2316         }
2317
2318 #if USB_HAVE_PF
2319         if (xfer->usb_state != USB_ST_SETUP)
2320                 usbpf_xfertap(xfer, USBPF_XFERTAP_DONE);
2321 #endif
2322         /* call processing routine */
2323         (xfer->callback) (xfer, xfer->error);
2324
2325         /* pickup the USB mutex again */
2326         USB_BUS_LOCK(info->bus);
2327
2328         /*
2329          * Check if we got started after that we got cancelled, but
2330          * before we managed to do the callback.
2331          */
2332         if ((!xfer->flags_int.open) &&
2333             (xfer->flags_int.started) &&
2334             (xfer->usb_state == USB_ST_ERROR)) {
2335                 /* clear flag in case of drain */
2336                 xfer->flags_int.doing_callback = 0;
2337                 /* try to loop, but not recursivly */
2338                 usb_command_wrapper(&info->done_q, xfer);
2339                 return;
2340         }
2341
2342 done:
2343         /* clear flag in case of drain */
2344         xfer->flags_int.doing_callback = 0;
2345
2346         /*
2347          * Check if we are draining.
2348          */
2349         if (xfer->flags_int.draining &&
2350             (!xfer->flags_int.transferring)) {
2351                 /* "usbd_transfer_drain()" is waiting for end of transfer */
2352                 xfer->flags_int.draining = 0;
2353                 cv_broadcast(&info->cv_drain);
2354         }
2355
2356         /* do the next callback, if any */
2357         usb_command_wrapper(&info->done_q,
2358             info->done_q.curr);
2359 }
2360
2361 /*------------------------------------------------------------------------*
2362  *      usb_dma_delay_done_cb
2363  *
2364  * This function is called when the DMA delay has been exectuded, and
2365  * will make sure that the callback is called to complete the USB
2366  * transfer. This code path is ususally only used when there is an USB
2367  * error like USB_ERR_CANCELLED.
2368  *------------------------------------------------------------------------*/
2369 void
2370 usb_dma_delay_done_cb(struct usb_xfer *xfer)
2371 {
2372         USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
2373
2374         DPRINTFN(3, "Completed %p\n", xfer);
2375
2376         /* queue callback for execution, again */
2377         usbd_transfer_done(xfer, 0);
2378 }
2379
2380 /*------------------------------------------------------------------------*
2381  *      usbd_transfer_dequeue
2382  *
2383  *  - This function is used to remove an USB transfer from a USB
2384  *  transfer queue.
2385  *
2386  *  - This function can be called multiple times in a row.
2387  *------------------------------------------------------------------------*/
2388 void
2389 usbd_transfer_dequeue(struct usb_xfer *xfer)
2390 {
2391         struct usb_xfer_queue *pq;
2392
2393         pq = xfer->wait_queue;
2394         if (pq) {
2395                 TAILQ_REMOVE(&pq->head, xfer, wait_entry);
2396                 xfer->wait_queue = NULL;
2397         }
2398 }
2399
2400 /*------------------------------------------------------------------------*
2401  *      usbd_transfer_enqueue
2402  *
2403  *  - This function is used to insert an USB transfer into a USB *
2404  *  transfer queue.
2405  *
2406  *  - This function can be called multiple times in a row.
2407  *------------------------------------------------------------------------*/
2408 void
2409 usbd_transfer_enqueue(struct usb_xfer_queue *pq, struct usb_xfer *xfer)
2410 {
2411         /*
2412          * Insert the USB transfer into the queue, if it is not
2413          * already on a USB transfer queue:
2414          */
2415         if (xfer->wait_queue == NULL) {
2416                 xfer->wait_queue = pq;
2417                 TAILQ_INSERT_TAIL(&pq->head, xfer, wait_entry);
2418         }
2419 }
2420
2421 /*------------------------------------------------------------------------*
2422  *      usbd_transfer_done
2423  *
2424  *  - This function is used to remove an USB transfer from the busdma,
2425  *  pipe or interrupt queue.
2426  *
2427  *  - This function is used to queue the USB transfer on the done
2428  *  queue.
2429  *
2430  *  - This function is used to stop any USB transfer timeouts.
2431  *------------------------------------------------------------------------*/
2432 void
2433 usbd_transfer_done(struct usb_xfer *xfer, usb_error_t error)
2434 {
2435         USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
2436
2437         DPRINTF("err=%s\n", usbd_errstr(error));
2438
2439         /*
2440          * If we are not transferring then just return.
2441          * This can happen during transfer cancel.
2442          */
2443         if (!xfer->flags_int.transferring) {
2444                 DPRINTF("not transferring\n");
2445                 /* end of control transfer, if any */
2446                 xfer->flags_int.control_act = 0;
2447                 return;
2448         }
2449         /* only set transfer error if not already set */
2450         if (!xfer->error) {
2451                 xfer->error = error;
2452         }
2453         /* stop any callouts */
2454         usb_callout_stop(&xfer->timeout_handle);
2455
2456         /*
2457          * If we are waiting on a queue, just remove the USB transfer
2458          * from the queue, if any. We should have the required locks
2459          * locked to do the remove when this function is called.
2460          */
2461         usbd_transfer_dequeue(xfer);
2462
2463 #if USB_HAVE_BUSDMA
2464         if (mtx_owned(xfer->xroot->xfer_mtx)) {
2465                 struct usb_xfer_queue *pq;
2466
2467                 /*
2468                  * If the private USB lock is not locked, then we assume
2469                  * that the BUS-DMA load stage has been passed:
2470                  */
2471                 pq = &xfer->xroot->dma_q;
2472
2473                 if (pq->curr == xfer) {
2474                         /* start the next BUS-DMA load, if any */
2475                         usb_command_wrapper(pq, NULL);
2476                 }
2477         }
2478 #endif
2479         /* keep some statistics */
2480         if (xfer->error) {
2481                 xfer->xroot->bus->stats_err.uds_requests
2482                     [xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE]++;
2483         } else {
2484                 xfer->xroot->bus->stats_ok.uds_requests
2485                     [xfer->endpoint->edesc->bmAttributes & UE_XFERTYPE]++;
2486         }
2487
2488         /* call the USB transfer callback */
2489         usbd_callback_ss_done_defer(xfer);
2490 }
2491
2492 /*------------------------------------------------------------------------*
2493  *      usbd_transfer_start_cb
2494  *
2495  * This function is called to start the USB transfer when
2496  * "xfer->interval" is greater than zero, and and the endpoint type is
2497  * BULK or CONTROL.
2498  *------------------------------------------------------------------------*/
2499 static void
2500 usbd_transfer_start_cb(void *arg)
2501 {
2502         struct usb_xfer *xfer = arg;
2503         struct usb_endpoint *ep = xfer->endpoint;
2504
2505         USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
2506
2507         DPRINTF("start\n");
2508
2509 #if USB_HAVE_PF
2510         usbpf_xfertap(xfer, USBPF_XFERTAP_SUBMIT);
2511 #endif
2512
2513         /* the transfer can now be cancelled */
2514         xfer->flags_int.can_cancel_immed = 1;
2515
2516         /* start USB transfer, if no error */
2517         if (xfer->error == 0)
2518                 (ep->methods->start) (xfer);
2519
2520         /* check for transfer error */
2521         if (xfer->error) {
2522                 /* some error has happened */
2523                 usbd_transfer_done(xfer, 0);
2524         }
2525 }
2526
2527 /*------------------------------------------------------------------------*
2528  *      usbd_xfer_set_stall
2529  *
2530  * This function is used to set the stall flag outside the
2531  * callback. This function is NULL safe.
2532  *------------------------------------------------------------------------*/
2533 void
2534 usbd_xfer_set_stall(struct usb_xfer *xfer)
2535 {
2536         if (xfer == NULL) {
2537                 /* tearing down */
2538                 return;
2539         }
2540         USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
2541
2542         /* avoid any races by locking the USB mutex */
2543         USB_BUS_LOCK(xfer->xroot->bus);
2544         xfer->flags.stall_pipe = 1;
2545         USB_BUS_UNLOCK(xfer->xroot->bus);
2546 }
2547
2548 int
2549 usbd_xfer_is_stalled(struct usb_xfer *xfer)
2550 {
2551         return (xfer->endpoint->is_stalled);
2552 }
2553
2554 /*------------------------------------------------------------------------*
2555  *      usbd_transfer_clear_stall
2556  *
2557  * This function is used to clear the stall flag outside the
2558  * callback. This function is NULL safe.
2559  *------------------------------------------------------------------------*/
2560 void
2561 usbd_transfer_clear_stall(struct usb_xfer *xfer)
2562 {
2563         if (xfer == NULL) {
2564                 /* tearing down */
2565                 return;
2566         }
2567         USB_XFER_LOCK_ASSERT(xfer, MA_OWNED);
2568
2569         /* avoid any races by locking the USB mutex */
2570         USB_BUS_LOCK(xfer->xroot->bus);
2571
2572         xfer->flags.stall_pipe = 0;
2573
2574         USB_BUS_UNLOCK(xfer->xroot->bus);
2575 }
2576
2577 /*------------------------------------------------------------------------*
2578  *      usbd_pipe_start
2579  *
2580  * This function is used to add an USB transfer to the pipe transfer list.
2581  *------------------------------------------------------------------------*/
2582 void
2583 usbd_pipe_start(struct usb_xfer_queue *pq)
2584 {
2585         struct usb_endpoint *ep;
2586         struct usb_xfer *xfer;
2587         uint8_t type;
2588
2589         xfer = pq->curr;
2590         ep = xfer->endpoint;
2591
2592         USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
2593
2594         /*
2595          * If the endpoint is already stalled we do nothing !
2596          */
2597         if (ep->is_stalled) {
2598                 return;
2599         }
2600         /*
2601          * Check if we are supposed to stall the endpoint:
2602          */
2603         if (xfer->flags.stall_pipe) {
2604                 struct usb_device *udev;
2605                 struct usb_xfer_root *info;
2606
2607                 /* clear stall command */
2608                 xfer->flags.stall_pipe = 0;
2609
2610                 /* get pointer to USB device */
2611                 info = xfer->xroot;
2612                 udev = info->udev;
2613
2614                 /*
2615                  * Only stall BULK and INTERRUPT endpoints.
2616                  */
2617                 type = (ep->edesc->bmAttributes & UE_XFERTYPE);
2618                 if ((type == UE_BULK) ||
2619                     (type == UE_INTERRUPT)) {
2620                         uint8_t did_stall;
2621
2622                         did_stall = 1;
2623
2624                         if (udev->flags.usb_mode == USB_MODE_DEVICE) {
2625                                 (udev->bus->methods->set_stall) (
2626                                     udev, ep, &did_stall);
2627                         } else if (udev->ctrl_xfer[1]) {
2628                                 info = udev->ctrl_xfer[1]->xroot;
2629                                 usb_proc_msignal(
2630                                     USB_BUS_NON_GIANT_PROC(info->bus),
2631                                     &udev->cs_msg[0], &udev->cs_msg[1]);
2632                         } else {
2633                                 /* should not happen */
2634                                 DPRINTFN(0, "No stall handler\n");
2635                         }
2636                         /*
2637                          * Check if we should stall. Some USB hardware
2638                          * handles set- and clear-stall in hardware.
2639                          */
2640                         if (did_stall) {
2641                                 /*
2642                                  * The transfer will be continued when
2643                                  * the clear-stall control endpoint
2644                                  * message is received.
2645                                  */
2646                                 ep->is_stalled = 1;
2647                                 return;
2648                         }
2649                 } else if (type == UE_ISOCHRONOUS) {
2650
2651                         /*
2652                          * Make sure any FIFO overflow or other FIFO
2653                          * error conditions go away by resetting the
2654                          * endpoint FIFO through the clear stall
2655                          * method.
2656                          */
2657                         if (udev->flags.usb_mode == USB_MODE_DEVICE) {
2658                                 (udev->bus->methods->clear_stall) (udev, ep);
2659                         }
2660                 }
2661         }
2662         /* Set or clear stall complete - special case */
2663         if (xfer->nframes == 0) {
2664                 /* we are complete */
2665                 xfer->aframes = 0;
2666                 usbd_transfer_done(xfer, 0);
2667                 return;
2668         }
2669         /*
2670          * Handled cases:
2671          *
2672          * 1) Start the first transfer queued.
2673          *
2674          * 2) Re-start the current USB transfer.
2675          */
2676         /*
2677          * Check if there should be any
2678          * pre transfer start delay:
2679          */
2680         if (xfer->interval > 0) {
2681                 type = (ep->edesc->bmAttributes & UE_XFERTYPE);
2682                 if ((type == UE_BULK) ||
2683                     (type == UE_CONTROL)) {
2684                         usbd_transfer_timeout_ms(xfer,
2685                             &usbd_transfer_start_cb,
2686                             xfer->interval);
2687                         return;
2688                 }
2689         }
2690         DPRINTF("start\n");
2691
2692 #if USB_HAVE_PF
2693         usbpf_xfertap(xfer, USBPF_XFERTAP_SUBMIT);
2694 #endif
2695         /* the transfer can now be cancelled */
2696         xfer->flags_int.can_cancel_immed = 1;
2697
2698         /* start USB transfer, if no error */
2699         if (xfer->error == 0)
2700                 (ep->methods->start) (xfer);
2701
2702         /* check for transfer error */
2703         if (xfer->error) {
2704                 /* some error has happened */
2705                 usbd_transfer_done(xfer, 0);
2706         }
2707 }
2708
2709 /*------------------------------------------------------------------------*
2710  *      usbd_transfer_timeout_ms
2711  *
2712  * This function is used to setup a timeout on the given USB
2713  * transfer. If the timeout has been deferred the callback given by
2714  * "cb" will get called after "ms" milliseconds.
2715  *------------------------------------------------------------------------*/
2716 void
2717 usbd_transfer_timeout_ms(struct usb_xfer *xfer,
2718     void (*cb) (void *arg), usb_timeout_t ms)
2719 {
2720         USB_BUS_LOCK_ASSERT(xfer->xroot->bus, MA_OWNED);
2721
2722         /* defer delay */
2723         usb_callout_reset(&xfer->timeout_handle,
2724             USB_MS_TO_TICKS(ms), cb, xfer);
2725 }
2726
2727 /*------------------------------------------------------------------------*
2728  *      usbd_callback_wrapper_sub
2729  *
2730  *  - This function will update variables in an USB transfer after
2731  *  that the USB transfer is complete.
2732  *
2733  *  - This function is used to start the next USB transfer on the
2734  *  ep transfer queue, if any.
2735  *
2736  * NOTE: In some special cases the USB transfer will not be removed from
2737  * the pipe queue, but remain first. To enforce USB transfer removal call
2738  * this function passing the error code "USB_ERR_CANCELLED".
2739  *
2740  * Return values:
2741  * 0: Success.
2742  * Else: The callback has been deferred.
2743  *------------------------------------------------------------------------*/
2744 static uint8_t
2745 usbd_callback_wrapper_sub(struct usb_xfer *xfer)
2746 {
2747         struct usb_endpoint *ep;
2748         struct usb_bus *bus;
2749         usb_frcount_t x;
2750
2751         bus = xfer->xroot->bus;
2752
2753         if ((!xfer->flags_int.open) &&
2754             (!xfer->flags_int.did_close)) {
2755                 DPRINTF("close\n");
2756                 USB_BUS_LOCK(bus);
2757                 (xfer->endpoint->methods->close) (xfer);
2758                 USB_BUS_UNLOCK(bus);
2759                 /* only close once */
2760                 xfer->flags_int.did_close = 1;
2761                 return (1);             /* wait for new callback */
2762         }
2763         /*
2764          * If we have a non-hardware induced error we
2765          * need to do the DMA delay!
2766          */
2767         if (xfer->error != 0 && !xfer->flags_int.did_dma_delay &&
2768             (xfer->error == USB_ERR_CANCELLED ||
2769             xfer->error == USB_ERR_TIMEOUT ||
2770             bus->methods->start_dma_delay != NULL)) {
2771
2772                 usb_timeout_t temp;
2773
2774                 /* only delay once */
2775                 xfer->flags_int.did_dma_delay = 1;
2776
2777                 /* we can not cancel this delay */
2778                 xfer->flags_int.can_cancel_immed = 0;
2779
2780                 temp = usbd_get_dma_delay(xfer->xroot->udev);
2781
2782                 DPRINTFN(3, "DMA delay, %u ms, "
2783                     "on %p\n", temp, xfer);
2784
2785                 if (temp != 0) {
2786                         USB_BUS_LOCK(bus);
2787                         /*
2788                          * Some hardware solutions have dedicated
2789                          * events when it is safe to free DMA'ed
2790                          * memory. For the other hardware platforms we
2791                          * use a static delay.
2792                          */
2793                         if (bus->methods->start_dma_delay != NULL) {
2794                                 (bus->methods->start_dma_delay) (xfer);
2795                         } else {
2796                                 usbd_transfer_timeout_ms(xfer,
2797                                     (void (*)(void *))&usb_dma_delay_done_cb,
2798                                     temp);
2799                         }
2800                         USB_BUS_UNLOCK(bus);
2801                         return (1);     /* wait for new callback */
2802                 }
2803         }
2804         /* check actual number of frames */
2805         if (xfer->aframes > xfer->nframes) {
2806                 if (xfer->error == 0) {
2807                         panic("%s: actual number of frames, %d, is "
2808                             "greater than initial number of frames, %d\n",
2809                             __FUNCTION__, xfer->aframes, xfer->nframes);
2810                 } else {
2811                         /* just set some valid value */
2812                         xfer->aframes = xfer->nframes;
2813                 }
2814         }
2815         /* compute actual length */
2816         xfer->actlen = 0;
2817
2818         for (x = 0; x != xfer->aframes; x++) {
2819                 xfer->actlen += xfer->frlengths[x];
2820         }
2821
2822         /*
2823          * Frames that were not transferred get zero actual length in
2824          * case the USB device driver does not check the actual number
2825          * of frames transferred, "xfer->aframes":
2826          */
2827         for (; x < xfer->nframes; x++) {
2828                 usbd_xfer_set_frame_len(xfer, x, 0);
2829         }
2830
2831         /* check actual length */
2832         if (xfer->actlen > xfer->sumlen) {
2833                 if (xfer->error == 0) {
2834                         panic("%s: actual length, %d, is greater than "
2835                             "initial length, %d\n",
2836                             __FUNCTION__, xfer->actlen, xfer->sumlen);
2837                 } else {
2838                         /* just set some valid value */
2839                         xfer->actlen = xfer->sumlen;
2840                 }
2841         }
2842         DPRINTFN(1, "xfer=%p endpoint=%p sts=%d alen=%d, slen=%d, afrm=%d, nfrm=%d\n",
2843             xfer, xfer->endpoint, xfer->error, xfer->actlen, xfer->sumlen,
2844             xfer->aframes, xfer->nframes);
2845
2846         if (xfer->error) {
2847                 /* end of control transfer, if any */
2848                 xfer->flags_int.control_act = 0;
2849
2850                 /* check if we should block the execution queue */
2851                 if ((xfer->error != USB_ERR_CANCELLED) &&
2852                     (xfer->flags.pipe_bof)) {
2853                         DPRINTFN(2, "xfer=%p: Block On Failure "
2854                             "on endpoint=%p\n", xfer, xfer->endpoint);
2855                         goto done;
2856                 }
2857         } else {
2858                 /* check for short transfers */
2859                 if (xfer->actlen < xfer->sumlen) {
2860
2861                         /* end of control transfer, if any */
2862                         xfer->flags_int.control_act = 0;
2863
2864                         if (!xfer->flags_int.short_xfer_ok) {
2865                                 xfer->error = USB_ERR_SHORT_XFER;
2866                                 if (xfer->flags.pipe_bof) {
2867                                         DPRINTFN(2, "xfer=%p: Block On Failure on "
2868                                             "Short Transfer on endpoint %p.\n",
2869                                             xfer, xfer->endpoint);
2870                                         goto done;
2871                                 }
2872                         }
2873                 } else {
2874                         /*
2875                          * Check if we are in the middle of a
2876                          * control transfer:
2877                          */
2878                         if (xfer->flags_int.control_act) {
2879                                 DPRINTFN(5, "xfer=%p: Control transfer "
2880                                     "active on endpoint=%p\n", xfer, xfer->endpoint);
2881                                 goto done;
2882                         }
2883                 }
2884         }
2885
2886         ep = xfer->endpoint;
2887
2888         /*
2889          * If the current USB transfer is completing we need to start the
2890          * next one:
2891          */
2892         USB_BUS_LOCK(bus);
2893         if (ep->endpoint_q[xfer->stream_id].curr == xfer) {
2894                 usb_command_wrapper(&ep->endpoint_q[xfer->stream_id], NULL);
2895
2896                 if (ep->endpoint_q[xfer->stream_id].curr != NULL ||
2897                     TAILQ_FIRST(&ep->endpoint_q[xfer->stream_id].head) != NULL) {
2898                         /* there is another USB transfer waiting */
2899                 } else {
2900                         /* this is the last USB transfer */
2901                         /* clear isochronous sync flag */
2902                         xfer->endpoint->is_synced = 0;
2903                 }
2904         }
2905         USB_BUS_UNLOCK(bus);
2906 done:
2907         return (0);
2908 }
2909
2910 /*------------------------------------------------------------------------*
2911  *      usb_command_wrapper
2912  *
2913  * This function is used to execute commands non-recursivly on an USB
2914  * transfer.
2915  *------------------------------------------------------------------------*/
2916 void
2917 usb_command_wrapper(struct usb_xfer_queue *pq, struct usb_xfer *xfer)
2918 {
2919         if (xfer) {
2920                 /*
2921                  * If the transfer is not already processing,
2922                  * queue it!
2923                  */
2924                 if (pq->curr != xfer) {
2925                         usbd_transfer_enqueue(pq, xfer);
2926                         if (pq->curr != NULL) {
2927                                 /* something is already processing */
2928                                 DPRINTFN(6, "busy %p\n", pq->curr);
2929                                 return;
2930                         }
2931                 }
2932         } else {
2933                 /* Get next element in queue */
2934                 pq->curr = NULL;
2935         }
2936
2937         if (!pq->recurse_1) {
2938
2939                 do {
2940
2941                         /* set both recurse flags */
2942                         pq->recurse_1 = 1;
2943                         pq->recurse_2 = 1;
2944
2945                         if (pq->curr == NULL) {
2946                                 xfer = TAILQ_FIRST(&pq->head);
2947                                 if (xfer) {
2948                                         TAILQ_REMOVE(&pq->head, xfer,
2949                                             wait_entry);
2950                                         xfer->wait_queue = NULL;
2951                                         pq->curr = xfer;
2952                                 } else {
2953                                         break;
2954                                 }
2955                         }
2956                         DPRINTFN(6, "cb %p (enter)\n", pq->curr);
2957                         (pq->command) (pq);
2958                         DPRINTFN(6, "cb %p (leave)\n", pq->curr);
2959
2960                 } while (!pq->recurse_2);
2961
2962                 /* clear first recurse flag */
2963                 pq->recurse_1 = 0;
2964
2965         } else {
2966                 /* clear second recurse flag */
2967                 pq->recurse_2 = 0;
2968         }
2969 }
2970
2971 /*------------------------------------------------------------------------*
2972  *      usbd_ctrl_transfer_setup
2973  *
2974  * This function is used to setup the default USB control endpoint
2975  * transfer.
2976  *------------------------------------------------------------------------*/
2977 void
2978 usbd_ctrl_transfer_setup(struct usb_device *udev)
2979 {
2980         struct usb_xfer *xfer;
2981         uint8_t no_resetup;
2982         uint8_t iface_index;
2983
2984         /* check for root HUB */
2985         if (udev->parent_hub == NULL)
2986                 return;
2987 repeat:
2988
2989         xfer = udev->ctrl_xfer[0];
2990         if (xfer) {
2991                 USB_XFER_LOCK(xfer);
2992                 no_resetup =
2993                     ((xfer->address == udev->address) &&
2994                     (udev->ctrl_ep_desc.wMaxPacketSize[0] ==
2995                     udev->ddesc.bMaxPacketSize));
2996                 if (udev->flags.usb_mode == USB_MODE_DEVICE) {
2997                         if (no_resetup) {
2998                                 /*
2999                                  * NOTE: checking "xfer->address" and
3000                                  * starting the USB transfer must be
3001                                  * atomic!
3002                                  */
3003                                 usbd_transfer_start(xfer);
3004                         }
3005                 }
3006                 USB_XFER_UNLOCK(xfer);
3007         } else {
3008                 no_resetup = 0;
3009         }
3010
3011         if (no_resetup) {
3012                 /*
3013                  * All parameters are exactly the same like before.
3014                  * Just return.
3015                  */
3016                 return;
3017         }
3018         /*
3019          * Update wMaxPacketSize for the default control endpoint:
3020          */
3021         udev->ctrl_ep_desc.wMaxPacketSize[0] =
3022             udev->ddesc.bMaxPacketSize;
3023
3024         /*
3025          * Unsetup any existing USB transfer:
3026          */
3027         usbd_transfer_unsetup(udev->ctrl_xfer, USB_CTRL_XFER_MAX);
3028
3029         /*
3030          * Reset clear stall error counter.
3031          */
3032         udev->clear_stall_errors = 0;
3033
3034         /*
3035          * Try to setup a new USB transfer for the
3036          * default control endpoint:
3037          */
3038         iface_index = 0;
3039         if (usbd_transfer_setup(udev, &iface_index,
3040             udev->ctrl_xfer, usb_control_ep_cfg, USB_CTRL_XFER_MAX, NULL,
3041             &udev->device_mtx)) {
3042                 DPRINTFN(0, "could not setup default "
3043                     "USB transfer\n");
3044         } else {
3045                 goto repeat;
3046         }
3047 }
3048
3049 /*------------------------------------------------------------------------*
3050  *      usbd_clear_data_toggle - factored out code
3051  *
3052  * NOTE: the intention of this function is not to reset the hardware
3053  * data toggle.
3054  *------------------------------------------------------------------------*/
3055 void
3056 usbd_clear_stall_locked(struct usb_device *udev, struct usb_endpoint *ep)
3057 {
3058         USB_BUS_LOCK_ASSERT(udev->bus, MA_OWNED);
3059
3060         /* check that we have a valid case */
3061         if (udev->flags.usb_mode == USB_MODE_HOST &&
3062             udev->parent_hub != NULL &&
3063             udev->bus->methods->clear_stall != NULL &&
3064             ep->methods != NULL) {
3065                 (udev->bus->methods->clear_stall) (udev, ep);
3066         }
3067 }
3068
3069 /*------------------------------------------------------------------------*
3070  *      usbd_clear_data_toggle - factored out code
3071  *
3072  * NOTE: the intention of this function is not to reset the hardware
3073  * data toggle on the USB device side.
3074  *------------------------------------------------------------------------*/
3075 void
3076 usbd_clear_data_toggle(struct usb_device *udev, struct usb_endpoint *ep)
3077 {
3078         DPRINTFN(5, "udev=%p endpoint=%p\n", udev, ep);
3079
3080         USB_BUS_LOCK(udev->bus);
3081         ep->toggle_next = 0;
3082         /* some hardware needs a callback to clear the data toggle */
3083         usbd_clear_stall_locked(udev, ep);
3084         USB_BUS_UNLOCK(udev->bus);
3085 }
3086
3087 /*------------------------------------------------------------------------*
3088  *      usbd_clear_stall_callback - factored out clear stall callback
3089  *
3090  * Input parameters:
3091  *  xfer1: Clear Stall Control Transfer
3092  *  xfer2: Stalled USB Transfer
3093  *
3094  * This function is NULL safe.
3095  *
3096  * Return values:
3097  *   0: In progress
3098  *   Else: Finished
3099  *
3100  * Clear stall config example:
3101  *
3102  * static const struct usb_config my_clearstall =  {
3103  *      .type = UE_CONTROL,
3104  *      .endpoint = 0,
3105  *      .direction = UE_DIR_ANY,
3106  *      .interval = 50, //50 milliseconds
3107  *      .bufsize = sizeof(struct usb_device_request),
3108  *      .timeout = 1000, //1.000 seconds
3109  *      .callback = &my_clear_stall_callback, // **
3110  *      .usb_mode = USB_MODE_HOST,
3111  * };
3112  *
3113  * ** "my_clear_stall_callback" calls "usbd_clear_stall_callback"
3114  * passing the correct parameters.
3115  *------------------------------------------------------------------------*/
3116 uint8_t
3117 usbd_clear_stall_callback(struct usb_xfer *xfer1,
3118     struct usb_xfer *xfer2)
3119 {
3120         struct usb_device_request req;
3121
3122         if (xfer2 == NULL) {
3123                 /* looks like we are tearing down */
3124                 DPRINTF("NULL input parameter\n");
3125                 return (0);
3126         }
3127         USB_XFER_LOCK_ASSERT(xfer1, MA_OWNED);
3128         USB_XFER_LOCK_ASSERT(xfer2, MA_OWNED);
3129
3130         switch (USB_GET_STATE(xfer1)) {
3131         case USB_ST_SETUP:
3132
3133                 /*
3134                  * pre-clear the data toggle to DATA0 ("umass.c" and
3135                  * "ata-usb.c" depends on this)
3136                  */
3137
3138                 usbd_clear_data_toggle(xfer2->xroot->udev, xfer2->endpoint);
3139
3140                 /* setup a clear-stall packet */
3141
3142                 req.bmRequestType = UT_WRITE_ENDPOINT;
3143                 req.bRequest = UR_CLEAR_FEATURE;
3144                 USETW(req.wValue, UF_ENDPOINT_HALT);
3145                 req.wIndex[0] = xfer2->endpoint->edesc->bEndpointAddress;
3146                 req.wIndex[1] = 0;
3147                 USETW(req.wLength, 0);
3148
3149                 /*
3150                  * "usbd_transfer_setup_sub()" will ensure that
3151                  * we have sufficient room in the buffer for
3152                  * the request structure!
3153                  */
3154
3155                 /* copy in the transfer */
3156
3157                 usbd_copy_in(xfer1->frbuffers, 0, &req, sizeof(req));
3158
3159                 /* set length */
3160                 xfer1->frlengths[0] = sizeof(req);
3161                 xfer1->nframes = 1;
3162
3163                 usbd_transfer_submit(xfer1);
3164                 return (0);
3165
3166         case USB_ST_TRANSFERRED:
3167                 break;
3168
3169         default:                        /* Error */
3170                 if (xfer1->error == USB_ERR_CANCELLED) {
3171                         return (0);
3172                 }
3173                 break;
3174         }
3175         return (1);                     /* Clear Stall Finished */
3176 }
3177
3178 /*------------------------------------------------------------------------*
3179  *      usbd_transfer_poll
3180  *
3181  * The following function gets called from the USB keyboard driver and
3182  * UMASS when the system has paniced.
3183  *
3184  * NOTE: It is currently not possible to resume normal operation on
3185  * the USB controller which has been polled, due to clearing of the
3186  * "up_dsleep" and "up_msleep" flags.
3187  *------------------------------------------------------------------------*/
3188 void
3189 usbd_transfer_poll(struct usb_xfer **ppxfer, uint16_t max)
3190 {
3191         struct usb_xfer *xfer;
3192         struct usb_xfer_root *xroot;
3193         struct usb_device *udev;
3194         struct usb_proc_msg *pm;
3195         uint16_t n;
3196         uint16_t drop_bus;
3197         uint16_t drop_xfer;
3198
3199         for (n = 0; n != max; n++) {
3200                 /* Extra checks to avoid panic */
3201                 xfer = ppxfer[n];
3202                 if (xfer == NULL)
3203                         continue;       /* no USB transfer */
3204                 xroot = xfer->xroot;
3205                 if (xroot == NULL)
3206                         continue;       /* no USB root */
3207                 udev = xroot->udev;
3208                 if (udev == NULL)
3209                         continue;       /* no USB device */
3210                 if (udev->bus == NULL)
3211                         continue;       /* no BUS structure */
3212                 if (udev->bus->methods == NULL)
3213                         continue;       /* no BUS methods */
3214                 if (udev->bus->methods->xfer_poll == NULL)
3215                         continue;       /* no poll method */
3216
3217                 /* make sure that the BUS mutex is not locked */
3218                 drop_bus = 0;
3219                 while (mtx_owned(&xroot->udev->bus->bus_mtx) && !SCHEDULER_STOPPED()) {
3220                         mtx_unlock(&xroot->udev->bus->bus_mtx);
3221                         drop_bus++;
3222                 }
3223
3224                 /* make sure that the transfer mutex is not locked */
3225                 drop_xfer = 0;
3226                 while (mtx_owned(xroot->xfer_mtx) && !SCHEDULER_STOPPED()) {
3227                         mtx_unlock(xroot->xfer_mtx);
3228                         drop_xfer++;
3229                 }
3230
3231                 /* Make sure cv_signal() and cv_broadcast() is not called */
3232                 USB_BUS_CONTROL_XFER_PROC(udev->bus)->up_msleep = 0;
3233                 USB_BUS_EXPLORE_PROC(udev->bus)->up_msleep = 0;
3234                 USB_BUS_GIANT_PROC(udev->bus)->up_msleep = 0;
3235                 USB_BUS_NON_GIANT_PROC(udev->bus)->up_msleep = 0;
3236
3237                 /* poll USB hardware */
3238                 (udev->bus->methods->xfer_poll) (udev->bus);
3239
3240                 USB_BUS_LOCK(xroot->bus);
3241
3242                 /* check for clear stall */
3243                 if (udev->ctrl_xfer[1] != NULL) {
3244
3245                         /* poll clear stall start */
3246                         pm = &udev->cs_msg[0].hdr;
3247                         (pm->pm_callback) (pm);
3248                         /* poll clear stall done thread */
3249                         pm = &udev->ctrl_xfer[1]->
3250                             xroot->done_m[0].hdr;
3251                         (pm->pm_callback) (pm);
3252                 }
3253
3254                 /* poll done thread */
3255                 pm = &xroot->done_m[0].hdr;
3256                 (pm->pm_callback) (pm);
3257
3258                 USB_BUS_UNLOCK(xroot->bus);
3259
3260                 /* restore transfer mutex */
3261                 while (drop_xfer--)
3262                         mtx_lock(xroot->xfer_mtx);
3263
3264                 /* restore BUS mutex */
3265                 while (drop_bus--)
3266                         mtx_lock(&xroot->udev->bus->bus_mtx);
3267         }
3268 }
3269
3270 static void
3271 usbd_get_std_packet_size(struct usb_std_packet_size *ptr,
3272     uint8_t type, enum usb_dev_speed speed)
3273 {
3274         static const uint16_t intr_range_max[USB_SPEED_MAX] = {
3275                 [USB_SPEED_LOW] = 8,
3276                 [USB_SPEED_FULL] = 64,
3277                 [USB_SPEED_HIGH] = 1024,
3278                 [USB_SPEED_VARIABLE] = 1024,
3279                 [USB_SPEED_SUPER] = 1024,
3280         };
3281
3282         static const uint16_t isoc_range_max[USB_SPEED_MAX] = {
3283                 [USB_SPEED_LOW] = 0,    /* invalid */
3284                 [USB_SPEED_FULL] = 1023,
3285                 [USB_SPEED_HIGH] = 1024,
3286                 [USB_SPEED_VARIABLE] = 3584,
3287                 [USB_SPEED_SUPER] = 1024,
3288         };
3289
3290         static const uint16_t control_min[USB_SPEED_MAX] = {
3291                 [USB_SPEED_LOW] = 8,
3292                 [USB_SPEED_FULL] = 8,
3293                 [USB_SPEED_HIGH] = 64,
3294                 [USB_SPEED_VARIABLE] = 512,
3295                 [USB_SPEED_SUPER] = 512,
3296         };
3297
3298         static const uint16_t bulk_min[USB_SPEED_MAX] = {
3299                 [USB_SPEED_LOW] = 8,
3300                 [USB_SPEED_FULL] = 8,
3301                 [USB_SPEED_HIGH] = 512,
3302                 [USB_SPEED_VARIABLE] = 512,
3303                 [USB_SPEED_SUPER] = 1024,
3304         };
3305
3306         uint16_t temp;
3307
3308         memset(ptr, 0, sizeof(*ptr));
3309
3310         switch (type) {
3311         case UE_INTERRUPT:
3312                 ptr->range.max = intr_range_max[speed];
3313                 break;
3314         case UE_ISOCHRONOUS:
3315                 ptr->range.max = isoc_range_max[speed];
3316                 break;
3317         default:
3318                 if (type == UE_BULK)
3319                         temp = bulk_min[speed];
3320                 else /* UE_CONTROL */
3321                         temp = control_min[speed];
3322
3323                 /* default is fixed */
3324                 ptr->fixed[0] = temp;
3325                 ptr->fixed[1] = temp;
3326                 ptr->fixed[2] = temp;
3327                 ptr->fixed[3] = temp;
3328
3329                 if (speed == USB_SPEED_FULL) {
3330                         /* multiple sizes */
3331                         ptr->fixed[1] = 16;
3332                         ptr->fixed[2] = 32;
3333                         ptr->fixed[3] = 64;
3334                 }
3335                 if ((speed == USB_SPEED_VARIABLE) &&
3336                     (type == UE_BULK)) {
3337                         /* multiple sizes */
3338                         ptr->fixed[2] = 1024;
3339                         ptr->fixed[3] = 1536;
3340                 }
3341                 break;
3342         }
3343 }
3344
3345 void    *
3346 usbd_xfer_softc(struct usb_xfer *xfer)
3347 {
3348         return (xfer->priv_sc);
3349 }
3350
3351 void *
3352 usbd_xfer_get_priv(struct usb_xfer *xfer)
3353 {
3354         return (xfer->priv_fifo);
3355 }
3356
3357 void
3358 usbd_xfer_set_priv(struct usb_xfer *xfer, void *ptr)
3359 {
3360         xfer->priv_fifo = ptr;
3361 }
3362
3363 uint8_t
3364 usbd_xfer_state(struct usb_xfer *xfer)
3365 {
3366         return (xfer->usb_state);
3367 }
3368
3369 void
3370 usbd_xfer_set_flag(struct usb_xfer *xfer, int flag)
3371 {
3372         switch (flag) {
3373                 case USB_FORCE_SHORT_XFER:
3374                         xfer->flags.force_short_xfer = 1;
3375                         break;
3376                 case USB_SHORT_XFER_OK:
3377                         xfer->flags.short_xfer_ok = 1;
3378                         break;
3379                 case USB_MULTI_SHORT_OK:
3380                         xfer->flags.short_frames_ok = 1;
3381                         break;
3382                 case USB_MANUAL_STATUS:
3383                         xfer->flags.manual_status = 1;
3384                         break;
3385         }
3386 }
3387
3388 void
3389 usbd_xfer_clr_flag(struct usb_xfer *xfer, int flag)
3390 {
3391         switch (flag) {
3392                 case USB_FORCE_SHORT_XFER:
3393                         xfer->flags.force_short_xfer = 0;
3394                         break;
3395                 case USB_SHORT_XFER_OK:
3396                         xfer->flags.short_xfer_ok = 0;
3397                         break;
3398                 case USB_MULTI_SHORT_OK:
3399                         xfer->flags.short_frames_ok = 0;
3400                         break;
3401                 case USB_MANUAL_STATUS:
3402                         xfer->flags.manual_status = 0;
3403                         break;
3404         }
3405 }
3406
3407 /*
3408  * The following function returns in milliseconds when the isochronous
3409  * transfer was completed by the hardware. The returned value wraps
3410  * around 65536 milliseconds.
3411  */
3412 uint16_t
3413 usbd_xfer_get_timestamp(struct usb_xfer *xfer)
3414 {
3415         return (xfer->isoc_time_complete);
3416 }