]> CyberLeo.Net >> Repos - FreeBSD/releng/10.0.git/blob - sys/net80211/ieee80211_phy.h
- Copy stable/10 (r259064) to releng/10.0 as part of the
[FreeBSD/releng/10.0.git] / sys / net80211 / ieee80211_phy.h
1 /*-
2  * Copyright (c) 2007-2008 Sam Leffler, Errno Consulting
3  * All rights reserved.
4  *
5  * Redistribution and use in source and binary forms, with or without
6  * modification, are permitted provided that the following conditions
7  * are met:
8  * 1. Redistributions of source code must retain the above copyright
9  *    notice, this list of conditions and the following disclaimer.
10  * 2. Redistributions in binary form must reproduce the above copyright
11  *    notice, this list of conditions and the following disclaimer in the
12  *    documentation and/or other materials provided with the distribution.
13  *
14  * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
15  * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
16  * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
17  * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
18  * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
19  * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
20  * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
21  * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
22  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
23  * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
24  *
25  * $FreeBSD$
26  */
27
28 #ifndef _NET80211_IEEE80211_PHY_H_
29 #define _NET80211_IEEE80211_PHY_H_
30
31 #ifdef _KERNEL
32 /*
33  * IEEE 802.11 PHY-related definitions.
34  */
35
36 /*
37  * Contention window (slots).
38  */
39 #define IEEE80211_CW_MAX        1023    /* aCWmax */
40 #define IEEE80211_CW_MIN_0      31      /* DS/CCK aCWmin, ERP aCWmin(0) */
41 #define IEEE80211_CW_MIN_1      15      /* OFDM aCWmin, ERP aCWmin(1) */
42
43 /*
44  * SIFS (microseconds).
45  */
46 #define IEEE80211_DUR_SIFS      10      /* DS/CCK/ERP SIFS */
47 #define IEEE80211_DUR_OFDM_SIFS 16      /* OFDM SIFS */
48
49 /*
50  * Slot time (microseconds).
51  */
52 #define IEEE80211_DUR_SLOT      20      /* DS/CCK slottime, ERP long slottime */
53 #define IEEE80211_DUR_SHSLOT    9       /* ERP short slottime */
54 #define IEEE80211_DUR_OFDM_SLOT 9       /* OFDM slottime */
55
56 /*
57  * DIFS (microseconds).
58  */
59 #define IEEE80211_DUR_DIFS(sifs, slot)  ((sifs) + 2 * (slot))
60
61 struct ieee80211_channel;
62
63 #define IEEE80211_RATE_TABLE_SIZE       128
64
65 struct ieee80211_rate_table {
66         int             rateCount;              /* NB: for proper padding */
67         uint8_t         rateCodeToIndex[256];   /* back mapping */
68         struct {
69                 uint8_t         phy;            /* CCK/OFDM/TURBO */
70                 uint32_t        rateKbps;       /* transfer rate in kbs */
71                 uint8_t         shortPreamble;  /* mask for enabling short
72                                                  * preamble in CCK rate code */
73                 uint8_t         dot11Rate;      /* value for supported rates
74                                                  * info element of MLME */
75                 uint8_t         ctlRateIndex;   /* index of next lower basic
76                                                  * rate; used for dur. calcs */
77                 uint16_t        lpAckDuration;  /* long preamble ACK dur. */
78                 uint16_t        spAckDuration;  /* short preamble ACK dur. */
79         } info[IEEE80211_RATE_TABLE_SIZE];
80 };
81
82 const struct ieee80211_rate_table *ieee80211_get_ratetable(
83                         struct ieee80211_channel *);
84
85 static __inline__ uint8_t
86 ieee80211_ack_rate(const struct ieee80211_rate_table *rt, uint8_t rate)
87 {
88         /*
89          * XXX Assert this is for a legacy rate; not for an MCS rate.
90          * If the caller wishes to use it for a basic rate, they should
91          * clear the high bit first.
92          */
93         KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate));
94
95         uint8_t cix = rt->info[rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL]].ctlRateIndex;
96         KASSERT(cix != (uint8_t)-1, ("rate %d has no info", rate));
97         return rt->info[cix].dot11Rate;
98 }
99
100 static __inline__ uint8_t
101 ieee80211_ctl_rate(const struct ieee80211_rate_table *rt, uint8_t rate)
102 {
103         /*
104          * XXX Assert this is for a legacy rate; not for an MCS rate.
105          * If the caller wishes to use it for a basic rate, they should
106          * clear the high bit first.
107          */
108         KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate));
109
110         uint8_t cix = rt->info[rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL]].ctlRateIndex;
111         KASSERT(cix != (uint8_t)-1, ("rate %d has no info", rate));
112         return rt->info[cix].dot11Rate;
113 }
114
115 static __inline__ enum ieee80211_phytype
116 ieee80211_rate2phytype(const struct ieee80211_rate_table *rt, uint8_t rate)
117 {
118         /*
119          * XXX Assert this is for a legacy rate; not for an MCS rate.
120          * If the caller wishes to use it for a basic rate, they should
121          * clear the high bit first.
122          */
123         KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate));
124
125         uint8_t rix = rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL];
126         KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate));
127         return rt->info[rix].phy;
128 }
129
130 static __inline__ int
131 ieee80211_isratevalid(const struct ieee80211_rate_table *rt, uint8_t rate)
132 {
133         /*
134          * XXX Assert this is for a legacy rate; not for an MCS rate.
135          * If the caller wishes to use it for a basic rate, they should
136          * clear the high bit first.
137          */
138         KASSERT(! (rate & 0x80), ("rate %d is basic/mcs?", rate));
139
140         return rt->rateCodeToIndex[rate] != (uint8_t)-1;
141 }
142
143 /*
144  * Calculate ACK field for
145  * o  non-fragment data frames
146  * o  management frames
147  * sent using rate, phy and short preamble setting.
148  */
149 static __inline__ uint16_t
150 ieee80211_ack_duration(const struct ieee80211_rate_table *rt,
151     uint8_t rate, int isShortPreamble)
152 {
153         uint8_t rix = rt->rateCodeToIndex[rate];
154
155         KASSERT(rix != (uint8_t)-1, ("rate %d has no info", rate));
156         if (isShortPreamble) {
157                 KASSERT(rt->info[rix].spAckDuration != 0,
158                         ("shpreamble ack dur is not computed!\n"));
159                 return rt->info[rix].spAckDuration;
160         } else {
161                 KASSERT(rt->info[rix].lpAckDuration != 0,
162                         ("lgpreamble ack dur is not computed!\n"));
163                 return rt->info[rix].lpAckDuration;
164         }
165 }
166
167 static __inline__ uint8_t
168 ieee80211_legacy_rate_lookup(const struct ieee80211_rate_table *rt,
169     uint8_t rate)
170 {
171
172         return (rt->rateCodeToIndex[rate & IEEE80211_RATE_VAL]);
173 }
174
175 /*
176  * Compute the time to transmit a frame of length frameLen bytes
177  * using the specified 802.11 rate code, phy, and short preamble
178  * setting.
179  *
180  * NB: SIFS is included.
181  */
182 uint16_t        ieee80211_compute_duration(const struct ieee80211_rate_table *,
183                         uint32_t frameLen, uint16_t rate, int isShortPreamble);
184 /*
185  * Convert PLCP signal/rate field to 802.11 rate code (.5Mbits/s)
186  */
187 uint8_t         ieee80211_plcp2rate(uint8_t, enum ieee80211_phytype);
188 /*
189  * Convert 802.11 rate code to PLCP signal.
190  */
191 uint8_t         ieee80211_rate2plcp(int, enum ieee80211_phytype);
192
193 uint32_t        ieee80211_compute_duration_ht(uint32_t frameLen,
194                         uint16_t rate, int streams, int isht40,
195                         int isShortGI);
196
197 #endif  /* _KERNEL */
198 #endif  /* !_NET80211_IEEE80211_PHY_H_ */